Commit Graph

333 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
ef56f76200
routing: demote channel update logging to trace 2018-07-23 17:01:39 -07:00
Olaoluwa Osuntokun
2e75499787
channeldb+routing: move adding shell nodes into db txn of AddChannelEdge
In this commit, we fix a slight race condition that can occur when we go
to add a shell node for a node announcement, but then right afterwards,
a new block arrives that causes us to prune an unconnected node. To
ensure this doesn't happen, we now add shell nodes within the same db
transaction as AddChannelEdge. This ensures that the state is fully
consistent and shell nodes will be added atomically along with the new
channel edge.

As a result of this change, we no longer need to add shell nodes within
the ChannelRouter, as the database will take care of this operation as
it should.
2018-07-22 21:02:53 -07:00
Olaoluwa Osuntokun
f8cbe34e93
routing: prune nodes from the channel graph on start up 2018-07-21 19:52:26 -07:00
Olaoluwa Osuntokun
6f60f139f4 multi: switch over import paths from roasbeef/* to btcsuite/* 2018-07-13 17:05:39 -07:00
Olaoluwa Osuntokun
39c1f46f85
routing: new newLogClosure to delay spew evaluation until log print time
In this commit, we update the generateSphinxPacket to use newLogClosure
to delay the spew evaluation until log print time. Before this commit,
even if we weren't on the trace logging level, the spew call would
always be evaluated.
2018-06-30 17:14:28 -05:00
Wilmer Paulino
ddf8f2cb01
routing: allow specifying a fee limit during route construction 2018-06-12 18:14:48 -07:00
Wilmer Paulino
6a6de812ba
routing: denote a payment's fee limit in millisatoshis instead 2018-06-12 18:14:47 -07:00
Sebastian Delgado
6746609ec6
Add constant and percentage-based fee limits to payments
- Extend SendRequest and QueryRoutesRequest protos
- newRoute function takes fee limit and cuts off routes that exceed it
- queryRoutes, payInvoice and sendPayment commands take the feeLimit inputs and pass them down to newRoute
- When no feeLimit is included, don't enforce any feeLimits at all (by setting feeLimit to maxValue)
2018-06-12 18:14:43 -07:00
Olaoluwa Osuntokun
eb65b0cd5a
routing: check to see if pubkey is nil before logging in sendPayment
In this commit, we now need to check to see if the pubkey is nil as if
the user specified a set of manual routes, then the dest pubkey would be
empty.
2018-06-06 20:45:56 -07:00
Olaoluwa Osuntokun
0113035f6d
routing: add new NewPaymentSessionFromRoutes function instead of interface
In this commit, we modify the recent refactoring of the mission control
sub-system to overload the existing payment session, rather than create
a brand new one. This allows us to re-use more of the existing logic, and
also feedback into mission control the failures incurred by any user
selected routes.
2018-06-06 20:45:56 -07:00
t4sk
53eb396ae9 routing/router: add SendToRoute 2018-06-06 20:45:00 -07:00
maurycy
3be08e69cf multi: 64bit aligment of atomic vars on arm/x86-32 2018-06-04 20:02:34 -07:00
Olaoluwa Osuntokun
f494433cbf
routing+server: add new QueryBandwidth method to reduce outbound failures
In this commit, we introduce a new method to the channel router's config
struct: QueryBandwidth. This method allows the channel router to query
for the up-to-date available bandwidth of a particular link. In the case
that this link emanates from/to us, then we can query the switch to see
if the link is active (if not bandwidth is zero), and return the current
best estimate for the available bandwidth of the link. If the link,
isn't one of ours, then we can thread through the total maximal
capacity of the link.

In order to implement this, the missionControl struct will now query the
switch upon creation to obtain a fresh bandwidth snapshot. We take care
to do this in a distinct db transaction in order to now introduced a
circular waiting condition between the mutexes in bolt, and the channel
state machine.

The aim of this change is to reduce the number of unnecessary failures
during HTLC payment routing as we'll now skip any links that are
inactive, or just don't have enough bandwidth for the payment. Nodes
that have several hundred channels (all of which in various states of
activity and available bandwidth) should see a nice gain from this w.r.t
payment latency.
2018-05-14 16:23:54 -07:00
Conner Fromknecht
eaa8cdf916
routing/router: improve validation barrier shutdown
This commit improves the shutdown of the router's
pending validation tasks, by ensuring the pending
tasks exit early if the validation barrier
receives a shutdown request.

Currently, any goroutines blocked by WaitForDependants
will continue execution after a shutdown is signaled.
This may lead to unnexpected behavior as the relation
between updates is no longer upheld. It also has the
side effect of slowing down shutdown, since we
continue to process the remaining updates.

To remedy this, WaitForDependants now returns an error
that signals if a shutdown was requested. The blocked
goroutines can exit early upon seeing this error,
without also signaling completion of their task to
the dependent tasks, which should will now properly
wait to read the validation barrier's quit signal.
2018-05-08 16:32:08 -07:00
Olaoluwa Osuntokun
bd9f1b597e
routing: prune edges instead of vertexes in response to an FailUnknownNextPeer error
In this commit we fix an lingering bug in the Mission Control logic we
execute in response to the FailUnknownNextPeer error. Historically, we
would treat this as the _next_ node not being online. As a result, we
would then prune away the vertex from the current reachable graph all
together. It was recently realized, that this would at times be a bit
_tooo_ aggressive if the channel we attempt to route over was faulty,
down, or the incoming node had connectivity issues with the outgoing
node.

In light of this realization, we'll now instead only prune the _edge_
that we attempted to route over. This ensures that we'll continue to
explore the possible edges. Additionally, this guards us against failure
modes where nodes report FailUnknownNextPeer to other nodes in an
attempt to more closely control our retry logic.

This change is a stop gap on the path to a more intelligent set of
autopilot heuristics.

Fixes #1114.
2018-04-23 17:51:02 -07:00
Wilmer Paulino
7965247db1
routing: add additionalEdges field to a missionControl's paymentSession
In this commit, we introduce the ability for payment sessions to store
an additional set of edges that can be used to assist a payment in
successfully reaching its destination.
2018-04-20 04:01:31 -04:00
Wilmer Paulino
5ddee85479
routing: prevent logging the public key params within the routing hints 2018-04-20 04:01:30 -04:00
Wilmer Paulino
1e5659e5f4
routing: introduce routing hints to lightning payments
In this commit, we add a new field of routing hints to payments over the
Lightning Network. These routing hints can later be used within the path
finding algorithm in order to craft a path that will reach the
destination succesfully.
2018-04-20 04:01:29 -04:00
Dimitris Tsapakidis
4009f7f874 multi: fix typos in comments 2018-04-17 19:03:27 -07:00
practicalswift
663c396235 multi: fix a-vs-an typos 2018-04-17 19:02:04 -07:00
Olaoluwa Osuntokun
a6ffe999c6
routing: prune vertex, not ege after repeated FeeInsufficientErrors
In this commit, we modify the way we handle FeeInsufficientErrors to
more aggressively route around nodes that repeatedly return the same
error to us. This will ensure we skip older nodes on the network which
are running a buggier older version of lnd. Eventually most nodes will
upgrade to this new version, making this change less needed.

We also update the existing test to properly use a multi-hop route to
ensure that we route around the offending node.
2018-04-06 14:52:02 -07:00
Olaoluwa Osuntokun
f935bd0baf
routing: add vertex pruning for non-final CLTV related errors
In this commit, we add vertex pruning for any non-final CLTV error.
Before this commit, we assumed that any source of this error was due to
the local node setting the incorrect time lock. However, it’s been
recently noticed on main net that there’re a set of nodes that seem to
not be properly scanned to the chain. Without this patch, users aren’t
able to route successfully as atm, we’ll stop all path finding attempts
if we encounter this.
2018-03-23 17:55:14 -07:00
Olaoluwa Osuntokun
635780858e
routing: add rejected spent outputs to the reject cache 2018-03-23 15:50:27 -07:00
Olaoluwa Osuntokun
93b04b39fe
routing: account for remaining routing onion errors in SendPayment
In this commit, we address a number of edge cases that were unaccounted
for when responding to errors that can be sent back due to an HTLC
routing failure. Namely:

   * We’ll no longer stop payment attempts if we’re unable to apply a
channel update, instead, we’ll log the error, prune the channel and
continue.
    * We’ll no remember which channels were pruned due to insufficient
fee errors. If we ever get a repeat fee error from a channel, then we
prune it. This ensure that we don’t get stuck in a loop due to a node
continually advertising the same fees.
   * We also correct an error in which node we’d prune due to a
temporary or permanent node failure. Before this commit, we would prune
the next node, when we should actually be pruning the node that sent us
the error.

Finally, we also add a new test to exercise the fee insufficient error
handling and channel pruning.

Fixes #865.
2018-03-21 15:23:48 -07:00
Olaoluwa Osuntokun
363cec7012
routing: add new PayAttemptTimeout field to LightningPayment
In this commit, we add a new field to the LightningPayment struct:
PayAttemptTimeout. This new field allows the caller to control exactly
how much time should be spent attempting to route a payment to the
destination. The default value we’ll use is 60 seconds, but callers are
able to specify a diff value. Once the timeout has passed, we’ll
abandon th e payment attempt, and return an error back to the original
caller.
2018-03-21 15:23:45 -07:00
Olaoluwa Osuntokun
800eea931f
build+multi: switch from bolt to bbolt
In this commit, we switch from boltbd/bolt to coreos/bbolt as the
former is no longer being actively maintained.
2018-03-10 19:01:13 -08:00
Olaoluwa Osuntokun
aa0410c90a
routing: add new methods to check the freshness of an edge/node
In this commit, we add a set of new methods to check the freshness of
an edge/node. This will allow callers to skip expensive validation in
the case that the router already knows of an item, or knows of a
fresher version of that time.

A set of tests have been added to ensure basic correctness of these new
methods.
2018-03-06 13:34:48 -05:00
Olaoluwa Osuntokun
ad0f5b31f6
routing: return cached route response in FindRoutes if enough routes
In this commit, we modify the caching structure to return a set of
cached routes for a request if the number of routes requested is less
than or equal to the number of cached of routes.
2018-02-12 16:22:28 -08:00
Olaoluwa Osuntokun
8a29c01354
routing: modify FindRoutes to take a max number of routes to return 2018-02-12 16:19:52 -08:00
Olaoluwa Osuntokun
b54b8dd7f1
routing: reject any new announcements which were pruned as zombies 2018-02-06 20:14:34 -08:00
Olaoluwa Osuntokun
6d05cb5aae
routing: extract zombie pruning to distinct method 2018-02-06 20:14:34 -08:00
Olaoluwa Osuntokun
1f3124f48a
routing: use [33]byte instead of *btcutil.Publickey for SendToSwitch
With this change, we can avoid unnecessarily serializing a public key.
2018-02-06 20:14:33 -08:00
Olaoluwa Osuntokun
6751cd8b9f
routing: update package to account for recent channeldb API changes 2018-02-06 20:14:32 -08:00
Daniel McNally
8543497dcc multi: fixing it's/its typos in comments 2018-02-06 19:13:07 -08:00
Alex Bosworth
bbc2ecd580 routing: typo fix
"we're closed" should be "were closed"
2018-02-06 19:12:10 -08:00
practicalswift
a93736d21e multi: comprehensive typo fixes across all packages 2018-02-06 19:11:11 -08:00
Olaoluwa Osuntokun
0a4de859a2
discovery+routing: reduce number of active validation barrier jobs
In order to reduce high CPU utilization during the initial network view
sync, we slash down the total number of active in-flight jobs that can
be launched.
2018-01-28 14:55:32 -08:00
Johan T. Halseth
b07f242dc2
routing: use multimutex.Mutex instead of package internal mutex 2018-01-24 10:26:40 +01:00
Olaoluwa Osuntokun
eba6ba0760
routing: properly prune edges that return a FailPermanentChannelFailure
In this commit, we now account for a case where a node sends us a
FailPermanentChannelFailure during a payment attempt. Before this
commit, we wouldn’t properly prune the edge to avoid re-using it. We
remedy this by properly attempting to prune the edge if possible.
Future changes well send a FailPermanentChannelFailure in the case that
we ned to go on-chain for an outgoing HTLC, and cancel back the
incoming HTLC.
2018-01-22 19:19:34 -08:00
Johan T. Halseth
0b8e7ff836
routing: embed FeeSchema in ChannelPolicy
This commit embeds the FeeSchema within the new
struct ChannelPolicy, which also contains the
TimeLockDelta for a channel.
2018-01-12 22:56:31 +01:00
Olaoluwa Osuntokun
d70e4bb0a0
routing: account for case where final destination send TemporaryChannelFailure
In this commit, we fix an existing bug that could cause lnd to crash if
we sent a payment, and the *destination* sent a temp channel failure
error message. When handling such a message, we’ll look in the nextHop
map to see which channel was *after* the node that sent the payment.
However, if the destination sends this error, then there’ll be no entry
in this map.

To address this case, we now add a prevHop map. If we attempt to lookup
a node in the nextHop map, and they don’t have an entry, then we’ll
consult the prevHop map.

We also update the set of tests to ensure that we’re properly setting
both the prevHop map and the nextHop map.
2018-01-10 15:15:55 -08:00
Johan T. Halseth
0571918d3d
routing: process only single ChannelEdgePolicy per channelID concurrently
This commit adds synchronization around the processing
of multiple ChannelEdgePolicy updates for the same
channel ID at the same time.

This fixes a bug that could cause the database access
HasChannelEdge to be out of date when the goroutine
came to the point where it was calling UpdateEdgePolicy.
This happened because a second goroutine would have
called UpdateEdgePolicy in the meantime.

This bug was quite benign, as if this happened at
runtime, we would eventually get the ChannelEdgePolicy
we had lost again, either from a peer sending it to
us, or if we would fail a payment since we were using
outdated information. However, it would cause some of
the tests to flake, since losing routing information
made payments we expected to go through fail if this
happened.

This is fixed by introducing a new mutex type, that
when locking and unlocking takes an additional
(id uint64) parameter, keeping an internal map
tracking what ID's are currently locked and the
count of goroutines waiting for the mutex. This
ensure we can still process updates concurrently,
only avoiding updates with the same channel ID from
being run concurrently.
2018-01-09 13:09:29 +01:00
Olaoluwa Osuntokun
98f63cdce1
routing: add new paymentSession companion struct to missionControl
In this commit, we modify the pruning semantics of the missionControl
struct. Before this commit, on each payment attempt, we would fetch a
new graph pruned view each time. This served to instantly propagate any
detected failures to all outstanding payment attempts. However, this
meant that we could at times get stuck in a retry loop if sends take a
few second, then we may prune an edge, try another, then the original
edge is now unpruned.

To remedy this, we now introduce the concept of a paymentSession. The
session will start out as a snapshot of the latest graph prune view.
Any payment failures are now reported directly to the paymentSession
rather than missionControl. The rationale for this is that
edges/vertexes pruned as result of failures will never decay for a
local payment session, only for the global prune view. With this in
place, we ensure that our set of prune view only grows for a session.

Fixes #536.
2018-01-08 19:50:24 -08:00
Matt Drollette
adf0d98194 multi: fix several typos in godoc comments 2017-12-17 18:40:05 -08:00
Olaoluwa Osuntokun
455568279b
routing: ensure that new blocks connected monotonically increase in height
This commit fixes an existing bug within the ChannelRouter. Prior to
this commit, if the chain view skipped blocks or for some reason we had
a gap in blocks delivered, then we would simply accept them. This had
the potential to cause us to miss on-chain channel closure events. To
remedy this, we won’t process any blocks whose heights aren’t
*strictly* increasing.

A longer term fix would be to have the ChainView take a block height,
and re-dispatch any notifications from that height to the current
height.
2017-12-05 17:46:21 -08:00
Olaoluwa Osuntokun
ffd6b65ec1
routing: ensure access to r.bestHeight is thread-safe 2017-12-05 17:46:20 -08:00
Olaoluwa Osuntokun
73ccb76853
routing: update ChannelUpdate handling to recognize lnwire.ChanUpdateFlag 2017-11-30 22:24:35 -08:00
Olaoluwa Osuntokun
7757721a92
routing: don't dispatch notification if error is non nil after processing ann 2017-11-29 17:53:09 -08:00
Olaoluwa Osuntokun
5bc9f07d12
routing: validate incoming announcements in parallel 2017-11-29 16:44:14 -08:00
Olaoluwa Osuntokun
fcd5e4aa41
routing: when updating chain view filter on restart, use best height as height hint
In this commit, we modify the high value passed into UpdateFilter upon
restart. Before this commit, we would pass in the prune height, which
would cause a full rescan within the FilteredChainView if the best
height as > than the prune height. This was redundant as we would
shortly carry out a manual rescan in the method below. To fix this, we
now pass in the bestHeight, this isn’t an issue as the
syncGraphWithChain method will manually scan up to that best height.
2017-11-29 16:26:39 -08:00
Olaoluwa Osuntokun
f189e2395a
routing: if the graph has never been pruned, prune with current height
In this commit we ensure that if this is the first time that the
ChannelRouter is starting, then we set the pruned height+hash to the
current best height. Otherwise, it’s possible that we attempt to update
the filter with a 0 prune height, which will restart a historical
rescan unnecessarily.
2017-11-15 18:19:39 -08:00
Olaoluwa Osuntokun
2b052cc889
routing: only update the filter if we have a non-zero chain view
In this commit we ensure that we only update the filter, if we have a
non-zero chain view. Otherwise, a mini rescan may be kicked off
unnecessarily  if we don’t yet know of any channels yet in the greater
graph.
2017-11-15 18:17:51 -08:00
Laura Cressman
39d38da732 discovery: create deDupedAnnouncements struct in gosspier.go
For Part 1 of Issue #275. Create isolated private struct in
networkHandler goroutine that will de-duplicate
announcements added to the batch. The struct contains maps
for each of channel announcements, channel updates, and
node announcements to keep track of unique announcements.

The struct has a Reset method to reset stored announcements, an
AddMsg(lnwire.Message) method to add a new message to the current
batch, and a Batch method to return the set of de-duplicated
announcements.

Also fix a few minor typos.
2017-11-15 16:50:19 -08:00
Conner Fromknecht
153794adb0
routing/router: sets bestHeight before filtering chain
This commit alters the behavior of the router's logic on
 startup, ensuring that the chain view is filtered using
 the router's latest prune height. Before, the chain was
 filtered using the bestHeight variable, which was
 uninitialized, benignly forcing a rescan from genesis.
 In tracking down this, we realized that we should
 actually be using the prune height, as this is
 representative of the channel view loaded from disk.
 The best height/hash are now only used during
 startup to determine if we are out of sync.
2017-11-11 15:53:38 -08:00
Olaoluwa Osuntokun
9294358b5b
routing: populate the chain filter before calling syncGraphWithChain
In this commit we fix an existing bug within the ChannelRouter. Before
this commit, we would sync our graph prune state, *then* update the
cain filter. This is incorrect as the blocks we manually pruned may
have included channel closing transactions. As a result, we would miss
the pruning of a set of channels, and assume that they were still
active.

In this commit, we fix this by reversing the order: we first update the
chain filter and THEN sync the channel graph.
2017-11-06 16:10:24 -08:00
Johan T. Halseth
256db86b02
routing: make channel router aware of stale blocks
This commit make the channel router handle the case where
it wakes up on a stale branch, and also the case where a
reorg happens while it is active.
2017-11-03 00:05:32 +01:00
Olaoluwa Osuntokun
176fde4ec0
routing: modify applyChannelUpdate to not error out if update is stale
In this commit we fix a slight bug within the existing SendPayment loop
which would cause the wrong error to be returned to users. Prior to
this commit, if we received an update identical to what we were already
aware of, then that error would be returned rather than the
ForwardingError that encapsulated this update.

In this commit with remedy this by properly returning the exact error.

Partially fixes #391.
2017-10-24 18:23:04 -07:00
Olaoluwa Osuntokun
25614f67f8
routing: restore in memory selfNode within the ChannelRouter
In this commit we restore the in memory ChannelRouter as we’ll no
dynamically set the ChannelRouter’s pointer within he spec path finding
test example.
2017-10-22 18:36:59 -07:00
Olaoluwa Osuntokun
76ec41103e
routing: extend missionControl.RequestRoute to take final CLTV delta 2017-10-22 18:36:58 -07:00
Olaoluwa Osuntokun
aee1619488
routing: add new FinalCLTVDelta attribute to SendPayment
In this commit, we’ll now optionally allow the user to pass in the CLTV
delta value specified by the recipient a payment. If the value isn’t
specified, then we’ll use the current global default for the payment.
2017-10-22 18:36:51 -07:00
Olaoluwa Osuntokun
c8f45e3a04
routing: add new param to FindRoutes for CLTV expiry for final hop
In this commit, we modify the FindRoutes method to pass in the CLTV
expiry for the final hop. If the value isn’t passed in, then we’ll use
the current global default value in place.
2017-10-22 18:36:50 -07:00
Olaoluwa Osuntokun
65482faa79
routing: remove the selfNode attribute from memory
In this commit, we’ve removed the selfNode attribute from memory, as
the set of new tests we’ll write, will depend on us being able to
switch the source node dynamically from the database itself.
2017-10-22 18:36:48 -07:00
Olaoluwa Osuntokun
b4273d1eaa
routing: abstract path finding behind mission control
In this commit, from the PoV of the SendPayment method we now delegate
all path finding+verification to missionControl. This change doesn’t
materially affect anything, it simply expands the abstraction to make
way for future features that more heavily utilize mission control.
2017-10-17 19:44:17 -07:00
Olaoluwa Osuntokun
8ef829ed80
routing: modify SendPayment loop to be lazy, iterative, and use missionControl
In this commit we modify the SendPayment loop to optimize for
time-to-first-payment-success-or-failure. The prior logic would first
attempt to find at least 100 routes to the destination, then
iteratively prune them away as errors were encountered. In this commit,
we modify this approach to instead take a lazy approach: we first find
the current “best” path, attempt to send to that, and if an error
occurs we prune a section of the graph by reporting to missionControl,
then continue.

With this new approach, if the first known path has sufficient
capacity, and is available, then the payment speed is greatly improved
from the PoV of users. Additionally, we avoid the excessive computation
of crawling most of the graph in the k-shortest paths loop. With the
decay on missionControl, all routes will now feed information into the
central knowledge hung, allowing all payments to iteratively find out
the inactive portions of the payment graph.
2017-10-16 19:05:47 -07:00
Olaoluwa Osuntokun
276f2e467b
routing: end path finding on an additional set of critical-ish errors 2017-10-16 18:58:35 -07:00
Olaoluwa Osuntokun
b29a73a0dd
routing: don't prune our own channels during zombie channel collection
This commit is a precautionary commit which ensure that we don’t
attempt to prune our _own_ channels during zombie channel collection.
2017-10-16 18:14:01 -07:00
Olaoluwa Osuntokun
51b072c4b5
routing: return proper error if encounter non ForwardingError in SendPayment 2017-10-10 22:19:28 -07:00
Olaoluwa Osuntokun
646f79f566
routing: perform path finding inside a single DB transaction
This commit modifies the path finding logic such that all path finding
is done inside a _single_ database transaction. With this change, we
ensure that we don’t end up possibly creating hundreds of database
transactions slowing down the path finding and payment sending process
all together.
2017-10-10 22:19:27 -07:00
Olaoluwa Osuntokun
ce7179a468
routing: add basic route pruning in response to HTLC onion errors
This commit adds basic route pruning in response to HTLC onion errors.
With this new change, the router will now prune routes in response to
HTLC errors, which will reduce the time to payment success, and also
avoid a bunch of unnecessary network traffic.

We now respond to two errors lnwire.FailTemporaryChannelFailure and
lnwire.FailUnknownNextPeer. In response to the first error, we’ll prune
all routes that contain the channel which was unable to be routed over.
In response to the second error we’ll prune all routes that contain the
node which couldn’t be found.
2017-10-10 22:19:25 -07:00
Olaoluwa Osuntokun
8d7f3943bb
routing: add two new methods to filter routes based on node/channel 2017-10-10 22:19:24 -07:00
Olaoluwa Osuntokun
f6ac31281b
routing: also include the source node in the nextHopMap index
In this commit we modify the newRoute function to also add the source
node to the nextHopMap index. With this addition the indexes will now
allow the router to react based on failures that occur during the
_first_ hop, meaning the channel directly attached to the source node.
2017-10-10 22:19:23 -07:00
Olaoluwa Osuntokun
3b7855e449
routing: implement 2-week zombie channel pruning
This commit implements 2-week zombie channel pruning. This means that
every GraphPruneInterval (currently set to one hour), we’ll scan the
channel graph, marking any channels which haven’t had *both* edges
updated in 2 weeks as a “zombie”. During the second pass, all “zombie”
channel are removed from the channel graph all together.

Adding this functionality means we’ll ensure that we maintain a
“healthy” network view, which will cut down on the number of failed
HTLC routing attempts, and also reflect an active portion of the graph.
2017-10-04 20:46:09 -07:00
Olaoluwa Osuntokun
e81689057a
discovery+routing: remove DeleteEdge from ChannelGraphSource interface
This commit removes the recently added DeleteEdge method from the
ChannelGraphSource interface as it’s no longer needed.
2017-10-04 20:46:08 -07:00
Brandon
3907ae65c2 routing+discovery: implement 2-week network view pruning 2017-10-04 20:40:21 -07:00
Laura Cressman
156772d04a channeldb: use binary.Read/Write with bools in channel.go
Use binary.Read/Write in functions to serialize and deserialize
channel close summary and HTLC boolean data, as well as in
methods to put and fetch channel funding info. Remove lnd
implementations of readBool and writeBool as they are no
longer needed. Also fix a few minor typos.
2017-10-02 23:13:47 -07:00
Laura Cressman
29687f49eb routing: replace sort.Sort with sort.Slice in router.go
Use sort.Slice in FindRoutes function in routing/router.go, as part
of the move to use new language features. Remove sortableRoutes type
wrapper for slice of Routes since it is no longer needed to sort routes.
2017-10-02 23:13:47 -07:00
Olaoluwa Osuntokun
3ba70fe6ec
routing: add preliminary version of more intelligent payment error handling
This commit modifies the way we currently interpret errors when sending
payments via the SendToSwitch method. We split the errors into two
broad sections: critical errors which cause us to abandon the payment
dispatch all together, and errors which are transient meaning we should
continue trying to remainder of the returned routes.

Note that we haven’t yet properly implemented all the necessary
measures such as filtering edges that are detected as being temporarily
inactive, etc.

This change should correct erroneous behavior such as continuing to try
all available routes in the face of an invalid payment hash error and
the like.
2017-10-02 22:14:13 -07:00
Olaoluwa Osuntokun
486b464e1c
routing: move path caching into FindRoutes
This commit modifies the way we do path caching. Rather than only
caching within SendPayment, we now cache routes within FindRoutes. This
is more natural as SendPayment eventually calls FindRoute. As a result
of this commit, queries to FindRoute are now properly cached, speeding
up applications which are focused on graph visualization or querying
rather than sending payments.
2017-10-02 22:14:13 -07:00
John Griffith
1057a1a7c3 routing: handle onion errors in ChannelRouter 2017-10-02 22:13:05 -07:00
Olaoluwa Osuntokun
0e626ce42c
routing: add a select+quit case when receiving error to ensure graceful shutdown 2017-09-25 20:55:09 -07:00
Olaoluwa Osuntokun
b07e7fb7cc
routing: hop-payload for last hop should be the absolute timeout, not delta
This commit fixes an oversight in the path finding code when converting
a path into a route. Currently, for the last hop, we’d emplace the
expiry delta of the last hop within the per-hop payload. This was left
over from a prior version of the specification.

To fix this, we’ll now emplace the _absolute_ final HTLC expiry with
the payload, such that, the final hop that verify that the HTLC has not
been tampered with in flight.
2017-09-12 21:27:47 +02:00
Olaoluwa Osuntokun
f5d221012d
routing: update ChannelGraphSource due to latest API changes 2017-08-22 00:53:36 -07:00
Olaoluwa Osuntokun
bc4ad34190
routing: don't re-validate a channel update's edge if it already exists
By avoiding re-validating the channel edge, we avoid wasted network
bandwidth and queries.
2017-08-22 00:53:33 -07:00
Olaoluwa Osuntokun
6467fdd829
routing: update path finding and notifications to use mSAT 2017-08-22 00:53:12 -07:00
Olaoluwa Osuntokun
67f17b319a
routing: invalidate routing cache on each new block
This commit makes the routing cache invalidation a bit more aggressive.
We now invalidate the cache on each new block as the routes in the
cache are based on the current block height. Using the cached items may
cause our routes to fail due to them having time locks which have
already expired.
2017-08-02 21:07:06 -07:00
Olaoluwa Osuntokun
f61d977176
routing: obtain current height when creating a new route 2017-08-02 21:02:24 -07:00
Johan T. Halseth
39a59bbe6f routing: Require adding edge to node before adding node.
This commit introduces the requirement specified in BOLT#7,
where we ignore any node announcements for a specific node
if we yet haven't seen any channel announcements where this
node takes part. This is to prevent someone DoS-ing the
network with cheap node announcements. In the router this
is enforced by requiring a call to AddNode(node_id) to
be preceded by an AddEdge(edge_id) call, where node_id is
one of the nodes in edge_id.
2017-08-02 15:58:58 -07:00
Andrey Samokhvalov
2d378b3280 htlcswitch+router: add onion error obfuscation
Within the network, it's important that when an HTLC forwarding failure
occurs, the recipient is notified in a timely manner in order to ensure
that errors are graceful and not unknown. For that reason with
accordance to BOLT №4 onion failure obfuscation have been added.
2017-07-14 19:08:04 -07:00
Olaoluwa Osuntokun
9b9f419e51
routing: fix vet error, ensure wait group in topologyClient isn't copied 2017-06-25 13:48:52 +01:00
Olaoluwa Osuntokun
5c45d52ab6
routing: wait for topology clients to fully exit before closing ntfn chan
This commit fixes a send on closed channel panic by adding additional
synchronization when cancelling the notifications for a particular
topology client. We now ensure that all goroutines belonging to a
particular topology client exit fully before we close the notification
channel in order to avoid a panic.
2017-06-25 13:31:55 +01:00
Olaoluwa Osuntokun
fca51d6165
routing: use converted hop payloads for sphinx packet when creating onion 2017-06-16 22:43:00 +02:00
Olaoluwa Osuntokun
dfd37df0ed
routing: set expiry on initial outgoing HTLC using total time lock 2017-06-16 22:35:14 +02:00
bryanvu
4ac7cc719f lnwallet: replace hard-coded fees and adjust tests accordingly
This commit replaces the hard-coded 5000 satoshi fees with calls to the
FeeEstimator interface. This should provide a way to cleanly plug in
additional fee calculation algorithms in the future. This change
affected quite a few tests. When possible, the tests were changed to
assert amounts sent rather than balances so that fees wouldn't need to
be taken into account. There were several tests for which this wasn't
possible, so calls to the static fee calculator were made.
2017-05-15 20:26:11 -07:00
Olaoluwa Osuntokun
a4ba72c08c
routing: close exit chan before ntfnChan to cancel topology clients
This commit fixes a panic due to a send on a closed channel that could
possibly occur depending on the order of channel closes when a client
goes to cancel a topology notification client.

Previously we closed the ntfnChan first, this would possible result in
a panic as the goroutine may have succeeded on a send at the same time
the channel was closed. Instead, we now close the `exit` channel first
which is meant to be a signal to the goroutine that the client has been
canceled.
2017-05-15 18:47:26 -07:00
Olaoluwa Osuntokun
40a7523b8f
routing: fix incorrect logging fmt directive, log chanPoint for undo fetch failure 2017-05-15 18:20:49 -07:00
Olaoluwa Osuntokun
cc19695dad
routing: reject channel announcement if connected vertexes are unknown
This commit modifies the processing in the routing package eo new
announcements. Previously,  if we cgot a cnew channel announcement but
didn’t yet know of the verses that the chanell connected, the
cnnounacment would be accepted. This behavior was eronoues as if the
channel were to be queried for, the DB query would fail as we would be
unable to retrieve the two nodes involved int he channel.

To avoid such an error case, we will now _reject_ any channel
announcements in which we don’t yet have a valid node announcement for
the connected nodes. This case has been inserted into the handling of
channel announcement, a new test has been added, and finally older
tests have also been updated to ensure that nodes are added to the
database _before_ the edge is.
2017-05-14 19:27:24 -07:00
Olaoluwa Osuntokun
828d28581a
routing: abandon ChainNotifier for FilteredChainView
This commit modifies the routing package to no longer use the
ChainNotifier for pruning the channel graph. Instead, we now use the
FilteredChainView interface to more (from the ChannelRouter’s PoV)
efficiently maintain the channel graph.

Rather than scanning the _entire_ block manually, we now rely on the
FilteredChainView to provide us with FilteredBlocks which include
_only_ the relevant transactions that we care about.
2017-05-11 15:20:48 -07:00
Olaoluwa Osuntokun
1bb225a9bd
routing: print proper error msg on payment send fail 2017-04-14 17:12:04 -07:00
Olaoluwa Osuntokun
79807022a5
routing: update graph traversal to use latest API 2017-04-14 13:15:00 -07:00
Olaoluwa Osuntokun
c8bf521c75
routing: display channel capacity in info logging message 2017-04-14 11:48:09 -07:00
Olaoluwa Osuntokun
41a54145a7
routing: capitalize first letter of new error messages 2017-04-11 22:02:17 -07:00
Olaoluwa Osuntokun
ca053e5273
multi: minor coding style and comment clean ups post-discovery merge
This commit implements some minor coding style, commenting and naming
clean up after the recent major discovery service was merged into the
codebase.

Highlights of the naming changes:
* fundingManager.SendToDiscovery -> SendAnnouncement
* discovery.Discovery -> discovery.AuthenticatedGossiper

The rest of the changes consist primary of grammar fixes and proper
column wrapping.
2017-04-01 20:14:05 +02:00
Andrey Samokhvalov
07076cce21 routing+channeldb: add AddProof method
Originally we adding the edge without proof in order to able to use it
for payments path constrcution. This method will allow us to populate
the announcement proof after the exchange of the half proofs and
constrcutrion of full proof finished.
2017-03-29 19:49:05 -07:00
Andrey Samokhvalov
4bca54e30c routing: add validation of utxo
Add check that the edge that was received really exist in the blockchain
and that the announced funding keys and capcity corresponds to reality.
2017-03-29 19:49:05 -07:00
Andrey Samokhvalov
c3b2854428 lnwire: converge discovery part of messages with specification
Change the name of fields of messages which are belong to the discovery
subsystem in a such way so they were the same with the names that are
defined in the specification.
2017-03-29 19:49:05 -07:00
Andrey Samokhvalov
b4ac7071ff discovery+routing: split 'routing' package on 'routing' and 'discovery'
In this commit the routing package was divided on two separete one,
this was done because 'routing' package start take too much responsibily
on themself, so with following commit:

Routing pacakge:
Enitites:
* channeldb.ChannelEdge
* channeldb.ChannelPolicy
* channeldb.NodeLightning

Responsibilities:
* send topology notification
* find payment paths
* send payment
* apply topology changes to the graph
* prune graph
* validate that funding point exist and corresponds to given one
* to be the source of topology data

Discovery package:
Entities:
* lnwire.AnnounceSignature
* lnwire.ChannelAnnouncement
* lnwire.NodeAnnouncement
* lnwire.ChannelUpdateAnnouncement

Responsibilities:
* validate announcement signatures
* sync topology with newly connected peers
* handle the premature annoucement
* redirect topology changes to the router susbsystem
* broadcast announcement to the rest of the network
* exchange channel announcement proofs

Before that moment all that was in the 'routing' which is quite big for
one subsystem.

split
2017-03-29 19:49:05 -07:00
bryanvu
085b7333cb lnwire: add support for Features in NodeAnnouncement
Add support for Features in NodeAnnouncment according to spec.
2017-03-29 12:03:43 -07:00
bryanvu
9ffac9eae1 lnwire: update NodeAnnouncement to handle multiple addresses
This commit modifies address handling in the NodeAnnouncement struct,
switching from net.TCPAddr to []net.Addr. This enables more flexible
address handling with multiple types and multiple addresses for each
node. This commit addresses the first part of issue #131 .
2017-03-29 12:03:43 -07:00
Olaoluwa Osuntokun
69b257154f
routing: fix build on go 1.7.5 by using sort.Interface instead of sort.Lice
This commit fixes the issue of broken builds in versions other than go
1.7.5 by sorting according to the sort.Interface interface rather than
the newly available sort.Slice function.
2017-03-21 12:21:00 -07:00
Olaoluwa Osuntokun
3da8cd7551
routing: add a caching layer in front of the KSP algorithm
This commit adds caching to our route finding. Caching is done on a
tuple-basis mapping a (dest, amt) pair to a previously calculated set
of shortest paths. The cache invalidated on two occasions: when a block
closes a set of transactions, or we received a new channel update or
channel announcement message.

With this change, payments are now snappier from the PoV of an
application developer as we no longer need to do a series of disk-seeks
before we dispatch each payment.
2017-03-21 12:20:55 -07:00
Olaoluwa Osuntokun
b126298b2b
routing: implement route failure fallback in SendPayment
This commit adds payment route failure fallback to SendPayment. By
this, we mean that we now take all the possible routes found during
path finding and try them in series. Either a route fails and we move
onto the next one, or the route is successful and we terminate early.

With this commit, sending payments using lnd is now much more robust as
if there exists an eligible route with sufficient capacity, it will be
utilized.
2017-03-21 12:20:45 -07:00
Olaoluwa Osuntokun
9818f662cf
routing: exit early in FindRoutes if unable to convert any paths to a route 2017-03-21 12:20:42 -07:00
Olaoluwa Osuntokun
1df5bece85
routing: FindRoute is now FindRoutes, uses our KSP algo, ranks by fee
This commit modifies the existing FindRoute method on the ChannelRouter
to now use the KSP implementation added in a prior commit.

This new method FindRoutes, is able to find all the possible paths
between a source and destination. The method takes all paths reported
by findPaths, and attempt to turn each of them into a route. A route
differs from a path in that is has complete time-lock and fee
information. Some paths may not be able to be turned into routes as
once fees are accounted for the have an insufficient flow. We then take
the routes, sort them by total fee (with time-lock being a
time-breaker), then return them in sorted order.
2017-03-21 12:20:40 -07:00
Olaoluwa Osuntokun
e0ef63e4e0
routing: findRoute now returns a slice of selected hops in reverse order
This commit modifies the findRoute function to decouple the
validation+creation of a route, from the path finding algorithm itself.
When we say “route”, we mean the full payment route complete with
time-lock and fee information. When we say “path” we simple mean an
ordered set of channel edges from one node to another target node.

With this commit we can now perform path finding independent of route
creation which will be needed in the up coming refactor to implement a
new modified k-shortest paths algorithm.
2017-03-21 12:20:28 -07:00
Olaoluwa Osuntokun
c6c56173a8
routing: modify findRoute to accept starting node as a paramter
This commit slightly modified findRoute to accept the node which should
be used as the starting point in our path finding algorithm. With this
change, as we move to a k-shortest paths algorithm this modification
will be needed as all of our path finding attempts won’t always
originate from a the same starting point.
2017-03-21 12:20:25 -07:00
Andrey Samokhvalov
fd97a4bd19 lnd: partially fix golint warnings 2017-03-13 16:30:23 -07:00
Olaoluwa Osuntokun
1a78c73f7e
routing: add new notificaiton client for topology changes
This commit adds some new functionality to the channel router: the
ability to dispatch notification to registered clients upon either a
channel being closed, a new node appearing, or an exiting client being
updated or opened for the first time.

With this change, the integration tests will now be able to eliminate
most of the sleep as we gain a new syntonization point into the
propagation of information within the test network. Additionally, this
also paves the way for client side software to dynamically visualize
the channel graph in real-time as nodes+channels are updated.
2017-03-08 14:46:14 -08:00
Olaoluwa Osuntokun
2dfab8c6d7
routing+lnd: provide payment premiere as response to SendPayment 2017-02-21 01:43:48 -08:00
Olaoluwa Osuntokun
78561c3e35
routing: fix compile error in definition due to chainntfns API change 2017-02-21 01:43:01 -08:00
Olaoluwa Osuntokun
12f69692aa
multi: update sub-systems to use latest iteration of wire messages 2017-02-21 01:42:37 -08:00
Olaoluwa Osuntokun
5560f032f6
rpc+routing: fix panic when channel edge but no edge info in db 2017-02-16 19:35:32 +08:00
Olaoluwa Osuntokun
384fe61e73
multi: fix go vet warnings throughout code base 2017-02-16 19:33:19 +08:00
Olaoluwa Osuntokun
a094681dae
routing: only log pre-mature announcements if we have any 2017-02-07 18:38:48 -08:00
Olaoluwa Osuntokun
bf78122dc7
routing: ensure advertised transaction index is within bounds
This commit fixes bug that could result in the panicking or crashing of
nodes in the case of an at-funding-time reorganization within the
network. In order to avoid such a case, we now ensure that the
advertised transaction index is within the bounds of the block before
attempting to access it.

Note that this is a temporary patch commit until full advertisement
validation which is implemented in the discovery PR lands in master.
Additionally, better reorg handling during the funding process is being
specified within the spec and will properly be implemented within lnd
at a later date.
2017-02-06 14:54:57 -08:00
Olaoluwa Osuntokun
9cef2f8657
routing: add support for detection+processing of premature announcements
This commit fixes a prior block propagation race-condition by detecting
and properly processing “premature” announcements. A premature
announcement is one that’s received with an anchored block height which
is beyond our chain tip. Once received, we now store these
announcements in a special map that’s caches them in memory. Once a new
block arrives, we check the map for the existence of any entries,
processing them as normal if so.
2017-02-02 17:44:25 -08:00
Olaoluwa Osuntokun
08f0d0fbea
routing+rpcserver: move route querying+sending to SendPayment
This commit moves much of the logic for querying for a potential route,
constructing the HTLC including the Sphinx packet, and sending the
ultimate payment from the rpcServer to the ChannelRouter.

This movement paves the way for muilt-path path finding as well as
adding automatic retry logic to the ChannelRouter. Additionally, by
having the ChannelRouter construct the Sphinx packet, we’ll be able to
also include the proper time-lock and general per-hop-payload
information properly in the future.
2017-02-01 18:29:55 -08:00
Olaoluwa Osuntokun
db40b4322e
routing: rebroadcast our outgoing channels with a long period
This commit adds new behavior to the ChannelRouter struct: we know
rebroadcast our outgoing channels every 30 minutes. This new behavior
should ensure that both directions of an advertised channel edge are
always propagated though the network, fixing the issue of “ghost” edges
which exist but aren’t advertised.
2017-01-22 14:40:09 -08:00
Olaoluwa Osuntokun
8fd4d7ea6b
routing: fix bug in channel capacity display by ensuring properly typed arithmetic
This commit fixes a slight bug in the storage of the capacity of a
channel. Previously, we were subtracting a the hard coded fee amount
without first casting the integer to a btcutil.Amount which results in
a display/rounding error when the amount is converted to BTC.
2017-01-22 14:21:58 -08:00
Trevin Hofmann
40c7bac3aa multi: fix a variety of typos throughout the repo 2017-01-17 17:02:56 -08:00
Olaoluwa Osuntokun
7312565644
routing: allow full syncing graph state with partially advertised edges
This commit is similar to the prior commit to channeldb: we no longer
assume that _both_ edges of a channel will always be advertised. Such
an assumption resulted in the inability for a node to sync graph state
since we were previously returning an error when _both_ edges weren’t
found within the graph database.

To remedy this bug, we now carefully ensure that if one edge doesn’t
exist, then we still sync the other.
2017-01-17 13:18:05 -08:00
Olaoluwa Osuntokun
5affed38fc
multi: update btcsuite API's to latest upstream changes
This commit makes a large number of minor changes concerning API usage
within the deamon to match the latest version on the upstream btcsuite
libraries.

The major changes are the switch from wire.ShaHash to chainhash.Hash,
and that wire.NewMsgTx() now takes a paramter indicating the version of
the transaction to be created.
2017-01-05 13:56:34 -08:00
Olaoluwa Osuntokun
82815b703e
rpcserver: refactor logic for ListPayments/DeleteAllPayments
This commit slightly refactors the logic for the new outgoing payment
related RPC’s to more closely match the style of the rest of the
codebase. Additionally the tests have been updated to reflect the
changes to the protos of the new RPC’s.
2016-12-30 16:42:10 -08:00
Olaoluwa Osuntokun
e327ffe954
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks
This commit overhauls the routing package significantly to simplify the
code, conform to the rest of the coding style within the package, and
observe the new authenticated gossiping scheme outlined in BOLT07.

As a major step towards a more realistic path finding algorithm, fees
are properly calculated and observed during path finding. If a path has
sufficient capacity _before_ fees are applied, but afterwards the
finalized route would exceed the capacity of a single link, the route
is marked as invalid.

Currently a naive weighting algorithm is used which only factors in the
time-lock delta at each hop, thereby optimizing for the lowest time
lock. Fee calculation also isn’t finalized since we aren’t yet using
milli-satoshi throughout the daemon. The final TODO item within the PR
is to properly perform a multi-path search and rank the results based
on a summation heuristic rather than just return the first (out of
many) route found.

On the server side, once nodes are initially connected to the daemon,
our routing table will be synced with the peer’s using a naive “just
send everything scheme” to hold us over until I spec out some a
efficient graph reconciliation protocol. Additionally, the routing
table is now pruned by the channel router itself once new blocks arrive
rather than depending on peers to tell us when a channel flaps or is
closed.

Finally, the validation of peer announcements aren’t yet fully
implemented as they’ll be implemented within the pending discovery
package that was blocking on the completion of this package. Most off
the routing message processing will be moved out of this package and
into the discovery package where full validation will be carried out.
2016-12-27 16:44:22 -08:00