lnd.xprv/routing/router.go

1164 lines
39 KiB
Go

package routing
import (
"bytes"
"encoding/hex"
"fmt"
"sync"
"sync/atomic"
"time"
"github.com/davecgh/go-spew/spew"
"github.com/lightningnetwork/lnd/chainntnfs"
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/lnwallet"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/roasbeef/btcd/btcec"
"github.com/roasbeef/btcd/wire"
"github.com/roasbeef/btcutil"
"github.com/lightningnetwork/lightning-onion"
)
// FeeSchema is the set fee configuration for a Lighting Node on the network.
// Using the coefficients described within he schema, the required fee to
// forward outgoing payments can be derived.
//
// TODO(roasbeef): should be in switch instead?
type FeeSchema struct {
// TODO(rosbeef): all these should be in msat instead
// BaseFee is the base amount that will be chained for ANY payment
// forwarded.
BaseFee btcutil.Amount
// FeeRate is the rate that will be charged for forwarding payments.
// The fee rate has a granularity of 1/1000 th of a mili-satoshi, or a
// millionth of a satoshi.
FeeRate btcutil.Amount
}
// Config defines the configuration for the ChannelRouter. ALL elements within
// the configuration MUST be non-nil for the ChannelRouter to carry out its
// duties.
type Config struct {
// Graph is the channel graph that the ChannelRouter will use to gather
// metrics from and also to carry out path finding queries.
// TODO(roasbeef): make into an interface
Graph *channeldb.ChannelGraph
// Chain is the router's source to the most up-to-date blockchain data.
// All incoming advertised channels will be checked against the chain
// to ensure that the channels advertised are still open.
// TODO(roasbeef): remove after discovery service is in
Chain lnwallet.BlockChainIO
// Notifier is an instance of the ChainNotifier that the router uses to
// received notifications of incoming blocks. With each new incoming
// block found, the router may be able to partially prune the channel
// graph as channels may have been pruned.
// TODO(roasbeef): could possibly just replace this with an epoch
// channel.
Notifier chainntnfs.ChainNotifier
// FeeSchema is the set fee schema that will be announced on to the
// network.
// TODO(roasbeef): should either be in discovery or switch
FeeSchema *FeeSchema
// Broadcast is a function that is used to broadcast a particular set
// of messages to all peers that the daemon is connected to. If
// supplied, the exclude parameter indicates that the target peer should
// be excluded from the broadcast.
Broadcast func(exclude *btcec.PublicKey, msg ...lnwire.Message) error
// SendMessages is a function which allows the ChannelRouter to send a
// set of messages to a particular peer identified by the target public
// key.
SendMessages func(target *btcec.PublicKey, msg ...lnwire.Message) error
// SendToSwitch is a function that directs a link-layer switch to
// forward a fully encoded payment to the first hop in the route
// denoted by its public key. A non-nil error is to be returned if the
// payment was unsuccessful.
SendToSwitch func(firstHop *btcec.PublicKey,
htlcAdd *lnwire.HTLCAddRequest) error
}
// ChannelRouter is the layer 3 router within the Lightning stack. Below the
// ChannelRouter is the HtlcSwitch, and below that is the Bitcoin blockchain
// itself. The primary role of the ChannelRouter is to respond to queries for
// potential routes that can support a payment amount, and also general graph
// reachability questions. The router will prune the channel graph
// automatically as new blocks are discovered which spend certain known funding
// outpoints, thereby closing their respective channels. Additionally, it's the
// duty of the router to sync up newly connected peers with the latest state of
// the channel graph.
type ChannelRouter struct {
sync.RWMutex
// cfg is a copy of the configuration struct that the ChannelRouter was
// initialized with.
cfg *Config
// selfNode is the center of the star-graph centered around the
// ChannelRouter. The ChannelRouter uses this node as a starting point
// when doing any path finding.
selfNode *channeldb.LightningNode
// TODO(roasbeef): make LRU, invalidate upon new block connect
shortestPathCache map[[33]byte][]*Route
nodeCache map[[33]byte]*channeldb.LightningNode
edgeCache map[wire.OutPoint]*channeldb.ChannelEdge
// newBlocks is a channel in which new blocks connected to the end of
// the main chain are sent over.
newBlocks chan *chainntnfs.BlockEpoch
// networkMsgs is a channel that carries new network messages from
// outside the ChannelRouter to be processed by the networkHandler.
networkMsgs chan *routingMsg
// syncRequests is a channel that carries requests to synchronize newly
// connected peers to the state of the channel graph from our PoV.
syncRequests chan *syncRequest
// prematureAnnouncements maps a blockheight to a set of announcements
// which are "premature" from our PoV. An announcement is premature if
// it claims to be anchored in a block which is beyond the current
// mainchain tip as we know it. Premature announcements will be
// processed once the chain tip as we know it extends to/past the
// premature height.
// TODO(roasbeef): limit premature announcements to N
prematureAnnouncements map[uint32][]lnwire.Message
// bestHeight is the height of the block at the tip of the main chain
// as we know it.
bestHeight uint32
fakeSig *btcec.Signature
started uint32
stopped uint32
quit chan struct{}
wg sync.WaitGroup
}
// New creates a new instance of the ChannelRouter with the specified
// configuration parameters. As part of initialization, if the router detects
// that the channel graph isn't fully in sync with the latest UTXO (since the
// channel graph is a subset of the UTXO set) set, then the router will proceed
// to fully sync to the latest state of the UTXO set.
func New(cfg Config) (*ChannelRouter, error) {
// TODO(roasbeef): remove this place holder after sigs are properly
// stored in the graph.
s := "30450221008ce2bc69281ce27da07e6683571319d18e949ddfa2965fb6caa" +
"1bf0314f882d70220299105481d63e0f4bc2a88121167221b6700d72a0e" +
"ad154c03be696a292d24ae"
fakeSigHex, err := hex.DecodeString(s)
if err != nil {
return nil, err
}
fakeSig, err := btcec.ParseSignature(fakeSigHex, btcec.S256())
if err != nil {
return nil, err
}
selfNode, err := cfg.Graph.SourceNode()
if err != nil {
return nil, err
}
return &ChannelRouter{
cfg: &cfg,
selfNode: selfNode,
fakeSig: fakeSig,
networkMsgs: make(chan *routingMsg),
syncRequests: make(chan *syncRequest),
prematureAnnouncements: make(map[uint32][]lnwire.Message),
quit: make(chan struct{}),
}, nil
}
// Start launches all the goroutines the ChannelRouter requires to carry out
// its duties. If the router has already been started, then this method is a
// noop.
func (r *ChannelRouter) Start() error {
if !atomic.CompareAndSwapUint32(&r.started, 0, 1) {
return nil
}
log.Tracef("Channel Router starting")
// First we register for new notifications of newly discovered blocks.
// We do this immediately so we'll later be able to consume any/all
// blocks which were discovered as we prune the channel graph using a
// snapshot of the chain state.
blockEpochs, err := r.cfg.Notifier.RegisterBlockEpochNtfn()
if err != nil {
return err
}
r.newBlocks = blockEpochs.Epochs
_, height, err := r.cfg.Chain.GetBestBlock()
if err != nil {
return err
}
r.bestHeight = uint32(height)
// Before we begin normal operation of the router, we first need to
// synchronize the channel graph to the latest state of the UTXO set.
if err := r.syncGraphWithChain(); err != nil {
return err
}
r.wg.Add(1)
go r.networkHandler()
return nil
}
// Stop signals the ChannelRouter to gracefully halt all routines. This method
// will *block* until all goroutines have excited. If the channel router has
// already stopped then this method will return immediately.
func (r *ChannelRouter) Stop() error {
if !atomic.CompareAndSwapUint32(&r.stopped, 0, 1) {
return nil
}
log.Infof("Channel Router shutting down")
close(r.quit)
r.wg.Wait()
return nil
}
// syncGraphWithChain attempts to synchronize the current channel graph with
// the latest UTXO set state. This process involves pruning from the channel
// graph any channels which have been closed by spending their funding output
// since we've been down.
func (r *ChannelRouter) syncGraphWithChain() error {
// First, we'll need to check to see if we're already in sync with the
// latest state of the UTXO set.
bestHash, bestHeight, err := r.cfg.Chain.GetBestBlock()
if err != nil {
return err
}
pruneHash, pruneHeight, err := r.cfg.Graph.PruneTip()
if err != nil {
switch {
// If the graph has never been pruned, or hasn't fully been
// created yet, then we don't treat this as an explicit error.
case err == channeldb.ErrGraphNeverPruned:
case err == channeldb.ErrGraphNotFound:
default:
return err
}
}
log.Infof("Prune tip for Channel Graph: height=%v, hash=%v", pruneHeight,
pruneHash)
switch {
// If the graph has never been pruned, then we can exit early as this
// entails it's being created for the first time and hasn't seen any
// block or created channels.
case pruneHeight == 0 || pruneHash == nil:
return nil
// If the block hashes and heights match exactly, then we don't need to
// prune the channel graph as we're already fully in sync.
case bestHash.IsEqual(pruneHash) && uint32(bestHeight) == pruneHeight:
return nil
}
log.Infof("Syncing channel graph from height=%v (hash=%v) to height=%v "+
"(hash=%v)", pruneHeight, pruneHash, bestHeight, bestHash)
// If we're not yet caught up, then we'll walk forward in the chain in
// the chain pruning the channel graph with each new block in the chain
// that hasn't yet been consumed by the channel graph.
var numChansClosed uint32
for nextHeight := pruneHeight + 1; nextHeight <= uint32(bestHeight); nextHeight++ {
// Using the next height, fetch the next block to use in our
// incremental graph pruning routine.
nextHash, err := r.cfg.Chain.GetBlockHash(int64(nextHeight))
if err != nil {
return err
}
nextBlock, err := r.cfg.Chain.GetBlock(nextHash)
if err != nil {
return err
}
// We're only interested in all prior outputs that've been
// spent in the block, so collate all the referenced previous
// outpoints within each tx and input.
var spentOutputs []*wire.OutPoint
for _, tx := range nextBlock.Transactions {
for _, txIn := range tx.TxIn {
spentOutputs = append(spentOutputs,
&txIn.PreviousOutPoint)
}
}
// With the spent outputs gathered, attempt to prune the
// channel graph, also passing in the hash+height of the block
// being pruned so the prune tip can be updated.
numClosed, err := r.cfg.Graph.PruneGraph(spentOutputs, nextHash,
nextHeight)
if err != nil {
return err
}
log.Infof("Block %v (height=%v) closed %v channels",
nextHash, nextHeight, numClosed)
numChansClosed += numClosed
}
log.Infof("Graph pruning complete: %v channels we're closed since "+
"height %v", numChansClosed, pruneHeight)
return nil
}
// networkHandler is the primary goroutine for the ChannelRouter. The roles of
// this goroutine include answering queries related to the state of the
// network, syncing up newly connected peers, and also periodically
// broadcasting our latest state to all connected peers.
//
// NOTE: This MUST be run as a goroutine.
func (r *ChannelRouter) networkHandler() {
defer r.wg.Done()
var announcementBatch []lnwire.Message
// TODO(roasbeef): parametrize the above
trickleTimer := time.NewTicker(time.Millisecond * 300)
defer trickleTimer.Stop()
retransmitTimer := time.NewTicker(time.Minute * 30)
defer retransmitTimer.Stop()
for {
select {
// A new fully validated network message has just arrived. As a
// result we'll modify the channel graph accordingly depending
// on the exact type of the message.
case netMsg := <-r.networkMsgs:
// Process the network announcement to determine if
// this is either a new announcement from our PoV or an
// update to a prior vertex/edge we previously
// accepted.
accepted := r.processNetworkAnnouncement(netMsg.msg)
// If the update was accepted, then add it to our next
// announcement batch to be broadcast once the trickle
// timer ticks gain.
if accepted {
announcementBatch = append(announcementBatch, netMsg.msg)
}
// TODO(roasbeef): remove all unconnected vertexes
// after N blocks pass with no corresponding
// announcements.
// A new block has arrived, so we can prune the channel graph
// of any channels which were closed in the block.
case newBlock, ok := <-r.newBlocks:
// If the channel has been closed, then this indicates
// the daemon is shutting down, so we exit ourselves.
if !ok {
return
}
// Once a new block arrives, we update our running
// track of the height of the chain tip.
blockHeight := uint32(newBlock.Height)
r.bestHeight = blockHeight
// Next we check if we have any premature announcements
// for this height, if so, then we process them once
// more as normal announcements.
prematureAnns := r.prematureAnnouncements[uint32(newBlock.Height)]
if len(prematureAnns) != 0 {
log.Infof("Re-processing %v premature announcements for "+
"height %v", len(prematureAnns), blockHeight)
}
for _, ann := range prematureAnns {
if ok := r.processNetworkAnnouncement(ann); ok {
announcementBatch = append(announcementBatch, ann)
}
}
delete(r.prematureAnnouncements, blockHeight)
log.Infof("Pruning channel graph using block %v (height=%v)",
newBlock.Hash, blockHeight)
block, err := r.cfg.Chain.GetBlock(newBlock.Hash)
if err != nil {
log.Errorf("unable to get block: %v", err)
continue
}
// We're only interested in all prior outputs that've
// been spent in the block, so collate all the
// referenced previous outpoints within each tx and
// input.
var spentOutputs []*wire.OutPoint
for _, tx := range block.Transactions {
for _, txIn := range tx.TxIn {
spentOutputs = append(spentOutputs,
&txIn.PreviousOutPoint)
}
}
// With the spent outputs gathered, attempt to prune
// the channel graph, also passing in the hash+height
// of the block being pruned so the prune tip can be
// updated.
numClosed, err := r.cfg.Graph.PruneGraph(spentOutputs,
newBlock.Hash, blockHeight)
if err != nil {
log.Errorf("unable to prune routing table: %v", err)
continue
}
log.Infof("Block %v (height=%v) closed %v channels",
newBlock.Hash, blockHeight, numClosed)
// The retransmission timer has ticked which indicates that we
// should broadcast our personal channel to the network. This
// addresses the case of channel advertisements whether being
// dropped, or not properly propagated through the network.
case <-retransmitTimer.C:
var selfChans []lnwire.Message
selfPub := r.selfNode.PubKey.SerializeCompressed()
err := r.selfNode.ForEachChannel(nil, func(c *channeldb.ChannelEdge) error {
chanNodePub := c.Node.PubKey.SerializeCompressed()
// Compare our public key with that of the
// channel peer. If our key is "less" than
// theirs, then we're the "first" node in the
// advertisement, otherwise we're the second.
flags := uint16(1)
if bytes.Compare(selfPub, chanNodePub) == -1 {
flags = 0
}
selfChans = append(selfChans, &lnwire.ChannelUpdateAnnouncement{
Signature: r.fakeSig,
ChannelID: lnwire.NewChanIDFromInt(c.ChannelID),
Timestamp: uint32(c.LastUpdate.Unix()),
Flags: flags,
Expiry: c.Expiry,
HtlcMinimumMstat: uint32(c.MinHTLC),
FeeBaseMstat: uint32(c.FeeBaseMSat),
FeeProportionalMillionths: uint32(c.FeeProportionalMillionths),
})
return nil
})
if err != nil {
log.Errorf("unable to retransmit "+
"channels: %v", err)
continue
}
log.Infof("Retransmitting %v outgoing channels",
len(selfChans))
// With all the wire messages properly crafted, we'll
// broadcast our known outgoing channel to all our
// immediate peers.
if err := r.cfg.Broadcast(nil, selfChans...); err != nil {
log.Errorf("unable to re-broadcast "+
"channels: %v", err)
}
// The trickle timer has ticked, which indicates we should
// flush to the network the pending batch of new announcements
// we've received since the last trickle tick.
case <-trickleTimer.C:
// If the current announcement batch is nil, then we
// have no further work here.
if len(announcementBatch) == 0 {
continue
}
log.Infof("Broadcasting batch of %v new announcements",
len(announcementBatch))
// If we have new things to announce then broadcast
// then to all our immediately connected peers.
err := r.cfg.Broadcast(nil, announcementBatch...)
if err != nil {
log.Errorf("unable to send batch announcement: %v", err)
continue
}
// If we we're able to broadcast the current batch
// successfully, then we reset the batch for a new
// round of announcements.
announcementBatch = nil
// We've just received a new request to synchronize a peer with
// our latest graph state. This indicates that a peer has just
// connected for the first time, so for now we dump our entire
// graph and allow them to sift through the (subjectively) new
// information on their own.
case syncReq := <-r.syncRequests:
nodePub := syncReq.node.SerializeCompressed()
log.Infof("Synchronizing channel graph with %x", nodePub)
if err := r.syncChannelGraph(syncReq); err != nil {
log.Errorf("unable to sync graph state with %x: %v",
nodePub, err)
}
// The router has been signalled to exit, to we exit our main
// loop so the wait group can be decremented.
case <-r.quit:
return
}
}
}
// processNetworkAnnouncement processes a new network relate authenticated
// channel or node announcement. If the update didn't affect the internal state
// of the draft due to either being out of date, invalid, or redundant, then
// false is returned. Otherwise, true is returned indicating that the caller
// may want to batch this request to be broadcast to immediate peers during the
// next announcement epoch.
func (r *ChannelRouter) processNetworkAnnouncement(msg lnwire.Message) bool {
isPremature := func(chanID *lnwire.ChannelID) bool {
return chanID.BlockHeight > r.bestHeight
}
switch msg := msg.(type) {
// A new node announcement has arrived which either presents a new
// node, or a node updating previously advertised information.
case *lnwire.NodeAnnouncement:
// Before proceeding ensure that we aren't already away of this
// node, and if we are then this is a newer update that we
// known of.
lastUpdate, exists, err := r.cfg.Graph.HasLightningNode(msg.NodeID)
if err != nil {
log.Errorf("Unable to query for the existence of node: %v",
err)
return false
}
// If we've reached this pint then we're aware of th vertex
// being advertised. So we now check if the new message has a
// new time stamp, if not then we won't accept the new data as
// it would override newer data.
msgTimestamp := time.Unix(int64(msg.Timestamp), 0)
if exists && lastUpdate.After(msgTimestamp) ||
lastUpdate.Equal(msgTimestamp) {
log.Debugf("Ignoring outdated announcement for %x",
msg.NodeID.SerializeCompressed())
return false
}
node := &channeldb.LightningNode{
LastUpdate: msgTimestamp,
Address: msg.Address,
PubKey: msg.NodeID,
Alias: msg.Alias.String(),
}
if err = r.cfg.Graph.AddLightningNode(node); err != nil {
log.Errorf("unable to add node %v: %v", msg.NodeID, err)
return false
}
log.Infof("Updated vertex data for node=%x",
msg.NodeID.SerializeCompressed())
// A new channel announcement has arrived, this indicates the
// *creation* of a new channel within the graph. This only advertises
// the existence of a channel and not yet the routing policies in
// either direction of the channel.
case *lnwire.ChannelAnnouncement:
// Prior to processing the announcement we first check if we
// already know of this channel, if so, then we can exit early.
channelID := msg.ChannelID.ToUint64()
_, _, exists, err := r.cfg.Graph.HasChannelEdge(channelID)
if err != nil && err != channeldb.ErrGraphNoEdgesFound {
log.Errorf("unable to check for edge existence: %v", err)
return false
} else if exists {
log.Debugf("Ignoring announcement for known chan_id=%v",
channelID)
return false
}
// If the advertised inclusionary block is beyond our knowledge
// of the chain tip, then we'll put the announcement in limbo
// to be fully verified once we advance forward in the chain.
if isPremature(&msg.ChannelID) {
blockHeight := msg.ChannelID.BlockHeight
log.Infof("Announcement for chan_id=(%v), is "+
"premature: advertises height %v, only height "+
"%v is known", channelID,
msg.ChannelID.BlockHeight, r.bestHeight)
r.prematureAnnouncements[blockHeight] = append(
r.prematureAnnouncements[blockHeight],
msg,
)
return false
}
// Before we can add the channel to the channel graph, we need
// to obtain the full funding outpoint that's encoded within
// the channel ID.
fundingPoint, err := r.fetchChanPoint(&msg.ChannelID)
if err != nil {
log.Errorf("unable to fetch chan point for chan_id=%v: %v",
channelID, err)
return false
}
// Now that we have the funding outpoint of the channel, ensure
// that it hasn't yet been spent. If so, then this channel has
// been closed so we'll ignore it.
if _, err := r.cfg.Chain.GetUtxo(&fundingPoint.Hash,
fundingPoint.Index); err != nil {
log.Errorf("unable to fetch utxo for chan_id=%v: %v",
channelID, err)
return false
}
// TODO(roasbeef): also add capacity here two instead of on the
// directed edges.
err = r.cfg.Graph.AddChannelEdge(msg.FirstNodeID,
msg.SecondNodeID, fundingPoint, channelID)
if err != nil {
log.Errorf("unable to add channel: %v", err)
return false
}
log.Infof("New channel discovered! Link "+
"connects %x and %x with ChannelPoint(%v), chan_id=%v",
msg.FirstNodeID.SerializeCompressed(),
msg.SecondNodeID.SerializeCompressed(),
fundingPoint, channelID)
// A new authenticated channel update has has arrived, this indicates
// that the directional information for an already known channel has
// been updated. All updates are signed and validated before reaching
// us, so we trust the data to be legitimate.
case *lnwire.ChannelUpdateAnnouncement:
chanID := msg.ChannelID.ToUint64()
edge1Timestamp, edge2Timestamp, _, err := r.cfg.Graph.HasChannelEdge(chanID)
if err != nil && err != channeldb.ErrGraphNoEdgesFound {
log.Errorf("unable to check for edge existence: %v", err)
return false
}
// If the advertised inclusionary block is beyond our knowledge
// of the chain tip, then we'll put the announcement in limbo
// to be fully verified once we advance forward in the chain.
if isPremature(&msg.ChannelID) {
blockHeight := msg.ChannelID.BlockHeight
log.Infof("Update announcement for chan_id=(%v), is "+
"premature: advertises height %v, only height "+
"%v is known", chanID, blockHeight,
r.bestHeight)
r.prematureAnnouncements[blockHeight] = append(
r.prematureAnnouncements[blockHeight],
msg,
)
return false
}
// As edges are directional edge node has a unique policy for
// the direction of the edge they control. Therefore we first
// check if we already have the most up to date information for
// that edge. If so, then we can exit early.
updateTimestamp := time.Unix(int64(msg.Timestamp), 0)
switch msg.Flags {
// A flag set of 0 indicates this is an announcement for
// the "first" node in the channel.
case 0:
if edge1Timestamp.After(updateTimestamp) ||
edge1Timestamp.Equal(updateTimestamp) {
log.Debugf("Ignoring announcement (flags=%v) "+
"for known chan_id=%v", msg.Flags,
chanID)
return false
}
// Similarly, a flag set of 1 indicates this is an
// announcement for the "second" node in the channel.
case 1:
if edge2Timestamp.After(updateTimestamp) ||
edge2Timestamp.Equal(updateTimestamp) {
log.Debugf("Ignoring announcement (flags=%v) "+
"for known chan_id=%v", msg.Flags,
chanID)
return false
}
}
// Before we can update the channel information, we need to get
// the UTXO itself so we can store the proper capacity.
chanPoint, err := r.fetchChanPoint(&msg.ChannelID)
if err != nil {
log.Errorf("unable to fetch chan point for chan_id=%v: %v", chanID, err)
return false
}
utxo, err := r.cfg.Chain.GetUtxo(&chanPoint.Hash,
chanPoint.Index)
if err != nil {
log.Errorf("unable to fetch utxo for chan_id=%v: %v",
chanID, err)
return false
}
// TODO(roasbeef): should be msat here
chanUpdate := &channeldb.ChannelEdge{
ChannelID: chanID,
ChannelPoint: *chanPoint,
LastUpdate: updateTimestamp,
Flags: msg.Flags,
Expiry: msg.Expiry,
MinHTLC: btcutil.Amount(msg.HtlcMinimumMstat),
FeeBaseMSat: btcutil.Amount(msg.FeeBaseMstat),
FeeProportionalMillionths: btcutil.Amount(msg.FeeProportionalMillionths),
// TODO(roasbeef): this is a hack, needs to be removed
// after commitment fees are dynamic.
Capacity: btcutil.Amount(utxo.Value) - btcutil.Amount(5000),
}
err = r.cfg.Graph.UpdateEdgeInfo(chanUpdate)
if err != nil {
log.Errorf("unable to add channel: %v", err)
return false
}
log.Infof("New channel update applied: %v",
spew.Sdump(chanUpdate))
}
return true
}
// syncRequest represents a request from an outside subsystem to the wallet to
// sync a new node to the latest graph state.
type syncRequest struct {
node *btcec.PublicKey
}
// SynchronizeNode sends a message to the ChannelRouter indicating it should
// synchronize routing state with the target node. This method is to be
// utilized when a node connections for the first time to provide it with the
// latest channel graph state.
func (r *ChannelRouter) SynchronizeNode(pub *btcec.PublicKey) {
select {
case r.syncRequests <- &syncRequest{
node: pub,
}:
case <-r.quit:
return
}
}
// syncChannelGraph attempts to synchronize the target node in the syncReq to
// the latest channel graph state. In order to accomplish this, (currently) the
// entire graph is read from disk, then serialized to the format defined within
// the current wire protocol. This cache of graph data is then sent directly to
// the target node.
func (r *ChannelRouter) syncChannelGraph(syncReq *syncRequest) error {
targetNode := syncReq.node
// TODO(roasbeef): need to also store sig data in db
// * will be nice when we switch to pairing sigs would only need one ^_^
// We'll collate all the gathered routing messages into a single slice
// containing all the messages to be sent to the target peer.
var announceMessages []lnwire.Message
// First run through all the vertexes in the graph, retrieving the data
// for the announcement we originally retrieved.
var numNodes uint32
if err := r.cfg.Graph.ForEachNode(func(node *channeldb.LightningNode) error {
alias, err := lnwire.NewAlias(node.Alias)
if err != nil {
return err
}
ann := &lnwire.NodeAnnouncement{
Signature: r.fakeSig,
Timestamp: uint32(node.LastUpdate.Unix()),
Address: node.Address,
NodeID: node.PubKey,
Alias: alias,
}
announceMessages = append(announceMessages, ann)
numNodes++
return nil
}); err != nil {
return err
}
// With the vertexes gathered, we'll no retrieve the initial
// announcement, as well as the latest channel update announcement for
// both of the directed edges that make up the channel.
// TODO(roasbeef): multi-sig keys should also be stored in DB
var numEdges uint32
if err := r.cfg.Graph.ForEachChannel(func(e1, e2 *channeldb.ChannelEdge) error {
// First we'll need to obtain the channel ID for the channel
// advertisement. As an edge may not be advertised, we'll grab
// the channel ID from the edge that was.
var chanID lnwire.ChannelID
switch {
case e1 != nil:
chanID = lnwire.NewChanIDFromInt(e1.ChannelID)
case e2 != nil:
chanID = lnwire.NewChanIDFromInt(e2.ChannelID)
case e1 == nil && e2 == nil:
return nil
default:
chanID = lnwire.NewChanIDFromInt(e1.ChannelID)
}
chanAnn := &lnwire.ChannelAnnouncement{
FirstNodeSig: r.fakeSig,
SecondNodeSig: r.fakeSig,
ChannelID: chanID,
FirstBitcoinSig: r.fakeSig,
SecondBitcoinSig: r.fakeSig,
}
// If the edge was advertised, then we'll use the node's
// identity within the announcement we send to the sync node.
// Otherwise, we'll fill in a dummy key.
//
// TODO(roasbeef): both else clauses need to be removed
// once we fully validate, andrew's PR will reconcile
// this
if e1 != nil {
chanAnn.FirstNodeID = e1.Node.PubKey
chanAnn.FirstBitcoinKey = e1.Node.PubKey
} else {
chanAnn.FirstNodeID = e2.Node.PubKey
chanAnn.FirstBitcoinKey = e2.Node.PubKey
}
if e2 != nil {
chanAnn.SecondNodeID = e2.Node.PubKey
chanAnn.SecondBitcoinKey = e2.Node.PubKey
} else {
chanAnn.SecondNodeID = e1.Node.PubKey
chanAnn.SecondBitcoinKey = e1.Node.PubKey
}
// We'll unconditionally queue the channel's existence proof as
// it will need to be processed before either of the channel
// update announcements.
announceMessages = append(announceMessages, chanAnn)
// Since it's up to a node's policy as to whether they
// advertise the edge in dire direction, we don't create an
// advertisement if the edge is nil.
if e1 != nil {
announceMessages = append(announceMessages, &lnwire.ChannelUpdateAnnouncement{
Signature: r.fakeSig,
ChannelID: chanID,
Timestamp: uint32(e1.LastUpdate.Unix()),
Flags: 0,
Expiry: e1.Expiry,
HtlcMinimumMstat: uint32(e1.MinHTLC),
FeeBaseMstat: uint32(e1.FeeBaseMSat),
FeeProportionalMillionths: uint32(e1.FeeProportionalMillionths),
})
}
if e2 != nil {
announceMessages = append(announceMessages, &lnwire.ChannelUpdateAnnouncement{
Signature: r.fakeSig,
ChannelID: chanID,
Timestamp: uint32(e2.LastUpdate.Unix()),
Flags: 1,
Expiry: e2.Expiry,
HtlcMinimumMstat: uint32(e2.MinHTLC),
FeeBaseMstat: uint32(e2.FeeBaseMSat),
FeeProportionalMillionths: uint32(e2.FeeProportionalMillionths),
})
}
numEdges++
return nil
}); err != nil && err != channeldb.ErrGraphNoEdgesFound {
log.Errorf("unable to sync edges w/ peer: %v", err)
return err
}
log.Infof("Syncing channel graph state with %x, sending %v "+
"nodes and %v edges", targetNode.SerializeCompressed(),
numNodes, numEdges)
// With all the announcement messages gathered, send them all in a
// single batch to the target peer.
return r.cfg.SendMessages(targetNode, announceMessages...)
}
// fetchChanPoint retrieves the original outpoint which is encoded within the
// channelID.
func (r *ChannelRouter) fetchChanPoint(chanID *lnwire.ChannelID) (*wire.OutPoint, error) {
// First fetch the block hash by the block number encoded, then use
// that hash to fetch the block itself.
blockNum := int64(chanID.BlockHeight)
blockHash, err := r.cfg.Chain.GetBlockHash(blockNum)
if err != nil {
return nil, err
}
fundingBlock, err := r.cfg.Chain.GetBlock(blockHash)
if err != nil {
return nil, err
}
// As a sanity check, ensure that the advertised transaction index is
// within the bounds of the total number of transactions within a
// block.
numTxns := uint32(len(fundingBlock.Transactions))
if chanID.TxIndex > numTxns-1 {
return nil, fmt.Errorf("tx_index=#%v is out of range "+
"(max_index=%v), network_chan_id=%v\n", chanID.TxIndex,
numTxns-1, spew.Sdump(chanID))
}
// TODO(roasbeef): skipping validation here as the discovery service
// should handle full validate
// Finally once we have the block itself, we seek to the targeted
// transaction index to obtain the funding output and txid.
fundingTx := fundingBlock.Transactions[chanID.TxIndex]
return &wire.OutPoint{
Hash: fundingTx.TxHash(),
Index: uint32(chanID.TxPosition),
}, nil
}
// routingMsg couples a routing related wire message with the peer that
// originally sent it.
type routingMsg struct {
msg lnwire.Message
peer *btcec.PublicKey
}
// ProcessRoutingMessags sends a new routing message along with the peer that
// sent the routing message to the ChannelRouter. The announcement will be
// processed then added to a queue for batched tickled announcement to all
// connected peers.
//
// TODO(roasbeef): need to move to discovery package
func (r *ChannelRouter) ProcessRoutingMessage(msg lnwire.Message, src *btcec.PublicKey) {
// TODO(roasbeef): msg wrappers to add a doneChan
rMsg := &routingMsg{
msg: msg,
peer: src,
}
select {
case r.networkMsgs <- rMsg:
case <-r.quit:
return
}
}
// FindRoute attempts to query the ChannelRouter for the "best" path to a
// particular target destination which is able to send `amt` after factoring in
// channel capacities and cumulative fees along the route.
func (r *ChannelRouter) FindRoute(target *btcec.PublicKey, amt btcutil.Amount) (*Route, error) {
dest := target.SerializeCompressed()
log.Debugf("Searching for path to %x, sending %v", dest, amt)
// We can short circuit the routing by opportunistically checking to
// see if the target vertex event exists in the current graph.
if _, exists, err := r.cfg.Graph.HasLightningNode(target); err != nil {
return nil, err
} else if !exists {
log.Debugf("Target %x is not in known graph", dest)
return nil, ErrTargetNotInNetwork
}
// TODO(roasbeef): add k-shortest paths
route, err := findRoute(r.cfg.Graph, target, amt)
if err != nil {
log.Errorf("Unable to find path: %v", err)
return nil, err
}
// TODO(roabseef): also create the Sphinx packet and add in the route
log.Debugf("Obtained path sending %v to %x: %v", amt, dest,
newLogClosure(func() string {
return spew.Sdump(route)
}),
)
return route, nil
}
// generateSphinxPacket generates then encodes a sphinx packet which encodes
// the onion route specified by the passed layer 3 route. The blob returned
// from this function can immediately be included within an HTLC add packet to
// be sent to the first hop within the route.
//
// TODO(roasbeef): add params for the per-hop payloads
func generateSphinxPacket(route *Route, paymentHash []byte) ([]byte, error) {
// First obtain all the public keys along the route which are contained
// in each hop.
nodes := make([]*btcec.PublicKey, len(route.Hops))
for i, hop := range route.Hops {
// We create a new instance of the public key to avoid possibly
// mutating the curve parameters, which are unset in a higher
// level in order to avoid spamming the logs.
pub := btcec.PublicKey{
Curve: btcec.S256(),
X: hop.Channel.Node.PubKey.X,
Y: hop.Channel.Node.PubKey.Y,
}
nodes[i] = &pub
}
// Next we generate the per-hop payload which gives each node within
// the route the necessary information (fees, CLTV value, etc) to
// properly forward the payment.
// TODO(roasbeef): properly set CLTV value, payment amount, and chain
// within hop payloads.
var hopPayloads [][]byte
for i := 0; i < len(route.Hops); i++ {
payload := bytes.Repeat([]byte{byte('A' + i)},
sphinx.HopPayloadSize)
hopPayloads = append(hopPayloads, payload)
}
sessionKey, err := btcec.NewPrivateKey(btcec.S256())
if err != nil {
return nil, err
}
// Next generate the onion routing packet which allows us to perform
// privacy preserving source routing across the network.
sphinxPacket, err := sphinx.NewOnionPacket(nodes, sessionKey,
hopPayloads, paymentHash)
if err != nil {
return nil, err
}
// Finally, encode Sphinx packet using it's wire representation to be
// included within the HTLC add packet.
var onionBlob bytes.Buffer
if err := sphinxPacket.Encode(&onionBlob); err != nil {
return nil, err
}
log.Tracef("Generated sphinx packet: %v",
newLogClosure(func() string {
// We unset the internal curve here in order to keep
// the logs from getting noisy.
sphinxPacket.Header.EphemeralKey.Curve = nil
return spew.Sdump(sphinxPacket)
}),
)
return onionBlob.Bytes(), nil
}
// LightningPayment describes a payment to be sent through the network to the
// final destination.
type LightningPayment struct {
// Target is the node in which the payment should be routed towards.
Target *btcec.PublicKey
// Amount is the value of the payment to send throuhg the network in
// satoshis.
// TODO(roasbeef): this should be milli satoshis
Amount btcutil.Amount
// PaymentHash is the r-hash value to use within the HTLC extended to
// the first hop.
PaymentHash [32]byte
// TODO(roasbeef): add message?
}
// SendPayment attempts to send a payment as described within the passed
// LightningPayment. This function is blocking and will return either: when the
// payment is successful, or all candidates routes have been attempted and
// resulted in a failed payment. If the payment succeeds, then a non-nil Route
// will be returned which describes the path the successful payment traversed
// within the network to reach the destination.
func (r *ChannelRouter) SendPayment(payment *LightningPayment) (*Route, error) {
// Query the graph for a potential path to the destination node that
// can support our payment amount. If a path is ultimately unavailable,
// then an error will be returned.
route, err := r.FindRoute(payment.Target, payment.Amount)
if err != nil {
return nil, err
}
log.Tracef("Selected route for payment: %#v", route)
// Generate the raw encoded sphinx packet to be included along with the
// htlcAdd message that we send directly to the switch.
sphinxPacket, err := generateSphinxPacket(route, payment.PaymentHash[:])
if err != nil {
return nil, err
}
// Craft an HTLC packet to send to the layer 2 switch. The metadata
// within this packet will be used to route the payment through the
// network, starting with the first-hop.
htlcAdd := &lnwire.HTLCAddRequest{
Amount: route.TotalAmount,
RedemptionHashes: [][32]byte{payment.PaymentHash},
OnionBlob: sphinxPacket,
}
// Attempt to send this payment through the network to complete the
// payment. If this attempt fails, then we'll bail our early.
firstHop := route.Hops[0].Channel.Node.PubKey
if err := r.cfg.SendToSwitch(firstHop, htlcAdd); err != nil {
return nil, err
}
return route, nil
}
// TopologyClient...
// TODO(roasbeef): put in discovery package?
type TopologyClient struct {
}
// TopologyChange...
type TopologyChange struct {
NewNodes []*channeldb.LinkNode
NewChannels []*channeldb.ChannelEdge
}
// notifyTopologyChange...
func (r *ChannelRouter) notifyTopologyChange() {
}
// SubscribeTopology....
func (r *ChannelRouter) SubscribeTopology() (*TopologyClient, error) {
return nil, nil
}