Commit Graph

736 Commits

Author SHA1 Message Date
Joost Jager
9ae014edf6
routing: use self instead of source node for creating unified policy
A unified policy differs between local channels and other channels on
the network. There is more information available for local channels and
this is used in the unified policy.

Previously we used the pathfinding source pubkey to determine whether to
apply the local channel logic or not. If queryroutes is executed with a
source node that isn't the self node, this wouldn't work.
2019-12-04 09:45:09 +01:00
Joost Jager
97344af8f3
routing: local balance check 2019-12-04 09:45:07 +01:00
Joost Jager
3aaf32dc2e
routing: improve equal cost route comparison
When the (virtual) payment attempt cost is set to zero, probabilities
are no longer a factor in determining the best route. In case of routes
with equal costs, we'd just go with the first one found. This commit
refines this behavior by picking the route with the highest probability.
So even though probability doesn't affect the route cost, it is still
used as a tie breaker.
2019-12-02 14:23:57 +01:00
Joost Jager
c15b0316a2
routing: use FailureReasonError for internal path finding errors 2019-11-27 15:21:12 +01:00
Joost Jager
b5f1bde604
routing: add error var for pre-built route tried 2019-11-27 15:21:10 +01:00
Joost Jager
ac2df9bbf4
routing: use simple errors for path finding 2019-11-27 15:21:08 +01:00
Joost Jager
6774b5a007
routing: remove unused error codes 2019-11-27 15:21:06 +01:00
Joost Jager
7e4f9dd70a
routing/test: simplify context instantiation 2019-11-26 21:40:30 +01:00
Joost Jager
f8e9efbf99
routing: allow route to self 2019-11-26 10:15:44 +01:00
Joost Jager
81b7798c03
routing: pop heap at the end of the loop
This prepares for routing to self.
2019-11-26 10:15:42 +01:00
Joost Jager
683282fa24
routing: check loop conditions at end
This prepares for routing to self. When checking the condition at the
start, the loop would terminate immediately because the source is equal
to the target.
2019-11-26 10:15:40 +01:00
Joost Jager
2b332893b7
routing/test: add test focusing on not having a cycle 2019-11-26 10:15:38 +01:00
Joost Jager
cdf1aa5bc1
routing: track amt ranges in mc 2019-11-22 11:17:28 +01:00
Joost Jager
62f8cca75b
routing+routerrpc: also expose amt for success results in mc 2019-11-22 11:17:26 +01:00
Olaoluwa Osuntokun
6f9fcfaccc
Merge pull request #3499 from cfromknecht/mpp-payments-rpc
channeldb+rpcserver: expose legacy payments as multi-path payments
2019-11-21 18:38:53 -08:00
Johan T. Halseth
8755a35860
Merge pull request #3667 from cfromknecht/log-fixes
fundingmanager+routing log touch ups
2019-11-20 15:57:05 +01:00
Conner Fromknecht
063f24f2ed
channeldb+routing: expose HTLCs in payment subscriptions
This commit modifies the FetchPayment method to return MPPayment structs
converted from the legacy on-disk format. This allows us to attach the
HTLCs to the events given to clients subscribing to the outcome of an
HTLC.

This commit also bubbles up to the routerrpc/router_server, by
populating HTLCAttempts in the response and extracting the legacy route
field from the HTLCAttempts.
2019-11-19 20:43:38 -08:00
Conner Fromknecht
01cecb1f27
multi: rename to FailureReasonPaymentDetails
Prior name is too long XD
2019-11-19 20:42:21 -08:00
Conner Fromknecht
9e019407fb
routing/control_tower: fix PaymentResult godocs 2019-11-19 20:40:44 -08:00
Conner Fromknecht
fbd599a2cb
multi: rename Payment.PaymentPreimage to Payment.Preimage
Preliminary step to exposing PaymentPreimage() as a method that can be
shared between legacy payments and mutli-path payments.
2019-11-19 20:40:29 -08:00
Joost Jager
a00a360018
Merge pull request #3739 from joostjager/incoming-restriction
routing: last hop restriction
2019-11-19 08:38:33 +01:00
Joost Jager
f28941c7e4
routing+routerrpc+lncli: enable last hop restriction for payments 2019-11-18 21:03:03 +01:00
Joost Jager
814dbea745
routing: add last hop restriction 2019-11-18 21:03:01 +01:00
Wilmer Paulino
29f12411cd
Merge pull request #3732 from Crypt-iQ/router_race_1115
routing: fix race condition when resuming payments
2019-11-18 11:06:18 -08:00
Joost Jager
0f6af2ed54
routing/test: fix outgoing restriction test
Previously both paths were equal cost, so it could also be a
coincedence that the path with the outgoing restriction would be chosen.
2019-11-18 12:09:43 +01:00
Joost Jager
5fde7977f4
routing/test: create path finding test context 2019-11-18 10:55:43 +01:00
nsa
929167b9af
routing: fix race condition when resuming payments 2019-11-15 14:44:05 -05:00
Joost Jager
a364d2cd82
routing: log route when payment attempt fails 2019-11-12 14:13:31 +01:00
Joost Jager
85dcaff0d9
routing/route: report amount per hop in Route.String()
Makes log output slightly more descriptive to aid debugging of routing
problems.
2019-11-12 14:13:27 +01:00
Joost Jager
b222b6e625
Merge pull request #3685 from cfromknecht/flat-features
flat features
2019-11-09 11:43:45 +01:00
Conner Fromknecht
5e27b5022c
multi: remove LocalFeatures and GlobalFeatures 2019-11-08 05:32:00 -08:00
Joost Jager
dc0399af51
routing: use distinct probability estimation for local channels
Previously we used the a priori probability also for our own untried
channels. This led to local channels that had seen a success already
being prioritized over untried local channels. In some cases, depending
on the configured payment attempt cost, this could lead to the payment
taking a two hop route while a direct payment was also possible.
2019-11-07 11:26:52 +01:00
Joost Jager
5a80c3459f
routing: create prob estimation func taking external node prob 2019-11-07 11:25:14 +01:00
Olaoluwa Osuntokun
863d795c94
Merge pull request #3616 from Crypt-iQ/router_race_1019
ticker: add tickerMtx to prevent data race
2019-11-05 19:47:18 -08:00
Conner Fromknecht
0035e8b99d
routing/router: fix double hex encoding of target pubkey 2019-11-05 15:04:24 -08:00
Conner Fromknecht
6d971e5113
routing/route/route: add optional MPP field to Hop
This commit also modifies the Router serialization to persist the MPP
struct when present, and properly restore it when loading from disk.
2019-11-04 14:11:28 -08:00
nsa
b392dd1b95
routing: move statTicker to prevent race condition 2019-11-02 13:55:41 -04:00
Olaoluwa Osuntokun
acd8a6e302
Merge pull request #3470 from cfromknecht/invalid-onion-payload
htlcswitch+lnwire: invalid onion payload
2019-11-01 18:58:00 -07:00
Joost Jager
fcf81ed8ff
Merge pull request #3556 from joostjager/query-mc-prob
routerrpc: add queryprob rpc
2019-10-31 08:03:29 +01:00
Conner Fromknecht
d08e8ddd61
routing/result_interpretation: process InvalidOnionPayload
An InvalidOnionPayload implies that the onion was successfully received
by the reporting node, but that they were unable to extract the
contents. Since we assume our own behavior is correct, this mostly
likely poins to an error in the reporter's implementation or that we
sent an unknown required type. Therefore we only penalize that single
hop, and consider the failure terminal if the receiver reported it.
2019-10-30 21:20:08 -07:00
Conner Fromknecht
2f8021d8db
routing/result_interpretation: fix off-by-one for incoming failure
Previously we would not mark a success for the first hop if the fail
source index was 2. We also add a test to assert this behavior.
2019-10-30 21:18:52 -07:00
Joost Jager
a8f077a841
Merge pull request #3558 from joostjager/non-strict-pathfinding
routing: non-strict path finding
2019-10-30 08:42:28 +01:00
Lars Lehtonen
6254c53a4a
routing: fix use of T.Fatal() in test goroutine 2019-10-29 13:21:53 -07:00
Joost Jager
729c3a6bd6
routing: use unified policy for build route 2019-10-29 19:17:58 +01:00
Joost Jager
fb57255b5c
routerrpc: add mc probability query rpc
Probabilities are no longer returned for querymc calls. To still provide
some insight into the mission control internals, this commit adds a new
rpc that calculates a success probability estimate for a specific node
pair and amount.
2019-10-29 12:32:19 +01:00
Joost Jager
3d8adaef95
routing: embed TimedPairResult in snapshot data 2019-10-29 12:32:15 +01:00
Joost Jager
57911faa98
routing: export TimedPairResult
Prepares for this data structure being accessed in mission control rpc
implementations.
2019-10-29 12:32:13 +01:00
Joost Jager
912a8201f9
routing: remove embedded struct from timedPairResult
This prepares for decoupling the result interpretation of a single
payment attempt from the information stored in mission control memory
on the history of a node pair. A planned follow-up where we store both
the last success and last failure requires this decoupling.
2019-10-29 12:32:11 +01:00
Joost Jager
a347237e7a
routing: use unified policy for path finding
In this commit we change path finding to no longer consider all channels
between a pair of nodes individually. We assume that nodes forward
non-strict and when we attempt a connection between two nodes, we don't
want to try multiple channels because their policies may not be identical.
Having distinct policies for channel to the same peer is against the
recommendation in the spec, but it happens in the wild. Especially since
we recently changed the default cltv delta value.

What this commit introduces is a unified policy. This can be looked upon
as the greatest common denominator of all policies and should maximize
the probability of getting the payment forwarded.
2019-10-25 11:22:28 +02:00
Joost Jager
6b391d04d0
routing/test: mark function as test helper 2019-10-25 11:22:26 +02:00
Juan Pablo Civile
818c302d46 routing: use nodeWithDist instead of vertex to avoid map access
The same nodeWithDist was fetched from the map for every channel it has.
This struct is not mutated so it can be fetched before and reused.
2019-10-24 21:38:07 -03:00
Juan Pablo Civile
df70095ad0 routing: optimize path finding structures
distance map now holds the edge the current path is coming from,
removing the need for next map.

Both distance map and distanceHeap now hold pointers instead of the full
struct to reduce allocations and copies.

Both these changes reduced path finding time by ~5% and memory usage by
~2mb.
2019-10-24 21:38:07 -03:00
Juan Pablo Civile
fc36df0e60 routing: avoid unneeded map access
`processEdge` basically had 4 expensive operations: 3 map accesses and
updating the heap. This removes one of those for a small performance
gain.
2019-10-24 21:31:30 -03:00
Juan Pablo Civile
3e60a23632 routing: pre-allocate the distance map to an estimated node count
Pre-sizing these structures avoids a lot of map resizing, which causes
copies and rehashing of entries. We mostly know that the map won't
exceed that size, and it doesn't affect memory usage in any significant
way.
2019-10-24 21:31:30 -03:00
Juan Pablo Civile
2141713936 routing: avoid walking all nodes for path finding if we don't need to
Calling `ForEachNode` hits the DB, and allocates and parses every node
in the graph. Walking the channels also loads nodes from the DB, so this
meant that each node was read/parsed/allocated several times per run.

This reduces runtime by ~10ms and memory usage by ~4mb.
2019-10-24 21:31:30 -03:00
Juan Pablo Civile
5389161162 routing: make log in findPath hot path use logClosure
It generates heap allocations for it's params even if it won't end up
using them.

Reduces memory usage by 2mb
2019-10-24 21:31:30 -03:00
Joost Jager
1fac41deed
routing+routerrpc: improve prob. estimation for untried connections
This commit changes mission control to partially base the estimated
probability for untried connections on historical results obtained in
previous payment attempts. This incentivizes routing nodes to keep all
of their channels in good shape.
2019-10-22 15:52:38 +02:00
Joost Jager
fab13900e2
routing+routerrpc: remove probability estimates from mc state snapshot
Probability estimates are amount dependent. Previously we assumed an
amount, but that starts to make less sense when we make probability more
dependent on amounts in the future.
2019-10-22 15:52:36 +02:00
Joost Jager
559d3c0910
routing: also fail pairs for node-level failures
This commit modifies the interpretation of node-level failures.
Previously only the failing node was marked. With this commit, also the
incoming and outgoing connections involved in the route are marked as
failed.

The change prepares for the removal of node-level failures in mission
control probability estimation.
2019-10-22 15:52:34 +02:00
Joost Jager
843c87a203
routing: create mc getWeight method 2019-10-22 15:52:32 +02:00
Joost Jager
a3f7dbc633
routing: change representation of pair results in mc
This commit changes the in-memory structure of the mission control
state. It prepares for calculation of a node probability. For this we
need to be able to efficiently look up the last results for all channels
of a node.
2019-10-22 15:52:30 +02:00
Joost Jager
aefbee78d6
routing: use pairResult constructors
To make it explicit whether a failure or a success result is
instantiated.
2019-10-22 15:52:28 +02:00
Joost Jager
37ef46bc48
routing/test: extract mission control test parameters 2019-10-22 15:52:26 +02:00
Johan T. Halseth
610a93e2ff
routing/chainview: check GetCFilter error
Since the filter will never be nil in non-error cases now, remove the
nil-check.
2019-10-15 10:31:25 +02:00
Wilmer Paulino
0fc401de19
routing+routerrpc: take max cltv limit into account within path finding
With the introduction of the max CLTV limit parameter, nodes are able to
reject HTLCs that exceed it. This should also be applied to path
finding, otherwise HTLCs crafted by the same node that exceed it never
left the switch. This wasn't a big deal since the previous max CLTV
limit was ~5000 blocks. Once it was lowered to 1008, the issue became
more apparent. Therefore, all of our path finding attempts now have a
restriction of said limit in in order to properly carry out HTLCs to the
network.
2019-10-11 18:04:49 -04:00
Olaoluwa Osuntokun
5ef1f85998
Merge pull request #3578 from wpaulino/no-freelist-sync-option
config: add sync freelist cli flag
2019-10-04 15:16:30 -07:00
Olaoluwa Osuntokun
c03fb8aca0
Merge pull request #3561 from Roasbeef/chan-validation-cleanup
chanvalidate: create new channel validation package
2019-10-04 12:32:07 -07:00
Wilmer Paulino
194a9dea81
multi: support sync freelist option within btcwallet 2019-10-04 12:19:40 -04:00
Olaoluwa Osuntokun
6ebada112f
routing: update 3d party channel verification to use new chanvalidate package
In the process of moving to use the new package, we no longer need to
fetch the outpoint directly, and instead only need to pass the funding
transaction into the new verification logic.
2019-10-03 16:23:17 -07:00
Wilmer Paulino
5ed1084130
Merge pull request #3572 from joostjager/canceled-spelling
multi: fix canceled spelling
2019-10-03 16:50:06 -04:00
Joost Jager
b58dbb2d70
multi: fix canceled spelling 2019-10-03 17:27:36 +02:00
Joost Jager
9f3656efeb
routing: log performance metrics 2019-10-03 15:07:11 +02:00
Olaoluwa Osuntokun
18f88cbd8d
Merge pull request #3440 from joostjager/buildroute
routing: add build route functionality
2019-09-24 20:24:24 -07:00
Joost Jager
299821152a
routing+routerrpc: add BuildRoute function 2019-09-24 10:00:44 +02:00
Valentine Wallace
9a52cb6dab
multi: update internals to support updating max htlc
In this commit, we update the router and link to support users
updating the max HTLC policy for their channels. By updating these internal
systems before updating the RPC server and lncli, we protect users from
being shown an option that doesn't actually work.
2019-09-23 13:07:10 +02:00
Joost Jager
c80feeb4b3
routing+discovery: extract local channel manager
The policy update logic that resided part in the gossiper and
part in the rpc server is extracted into its own object.

This prepares for additional validation logic to be added for policy
updates that would otherwise make the gossiper heavier.

It is also a small first step towards separation of our own channel data
from the rest of the graph.
2019-09-23 13:07:08 +02:00
Joost Jager
fd63ed13ff
routing/route: add vertex constructor for hex string 2019-09-17 11:11:00 +02:00
Joost Jager
8c44cf4a22
channeldb: add ComputeFee function 2019-09-17 11:10:58 +02:00
Joost Jager
f60e4b1e14
lnwire+htlcswitch: report height for invalid payment details failure
Extends the invalid payment details failure with the new accept height
field. This allows sender to distinguish between a genuine invalid
details situation and a delay caused by intermediate nodes.
2019-09-16 10:10:20 +02:00
Lars Lehtonen
3b29ecb921 routing: Fix dropped errors in tests.
lnd: Fix dropped errors in tests.

contractcourt: Fix dropped errors in tests.

htlcswitch: Fix dropped errors in tests.

invoices: Fix dropped error in tests.

lnwallet: Fix dropped errors in tests.

macaroons: Fix dropped error in tests.
2019-09-13 06:28:05 +00:00
Joost Jager
3d7de2ad39
multi: remove dead code 2019-09-10 17:21:59 +02:00
Conner Fromknecht
947cc50c13
routing/route/route: prevent modification of hop.TLVRecords
Currently the underlying array backing the hop's TLVRecords is modified
when combining custom records with the primitive forwarding info. This
commit uses a fresh slice to prevent modifications from mutating the
hop itself.
2019-09-04 14:14:34 -07:00
Conner Fromknecht
278e10a2fd
routing/route/route: omit next_hop_id for final hop
BOLT04 says to omit this field for final hops, but must be present on
all other hops.
2019-09-04 12:05:10 -07:00
Conner Fromknecht
dc0f429271
htlcswitch+routing: use TLV hop constructors 2019-09-04 12:05:09 -07:00
Joost Jager
ff0c5a0d5e
routing: process successes in mission control
This commit modifies paymentLifecycle so that it not only feeds
failures into mission control, but successes as well.
This allows for more accurate probability estimates. Previously,
the success probability for a successful pair and a pair with
no history was equal. There was no force that pushed towards
previously successful routes.
2019-08-23 09:15:41 +02:00
Joost Jager
2594abfba1
routing/test: remove unused parameter in mission control test 2019-08-23 09:15:39 +02:00
Olaoluwa Osuntokun
4697cfde30
routing: extend path finding to be TLV-EOB aware, allow dest TLV records
In this commit, we extend the path finding to be able to recognize when
a node needs the new TLV format, or the legacy format based on the
feature bits they expose. We also extend the `LightningPayment` struct
to allow the caller to specify an arbitrary set of TLV records which can
be used for a number of use-cases including various variants of
spontaneous payments.
2019-08-22 18:53:01 -07:00
Olaoluwa Osuntokun
5b4c8ac232
routing/route+tlv: add new TLV-EOB awareness to Hop+Route
In this commit, we extend the Hop struct to carry an arbitrary set of
TLV values, and add a new field that allows us to distinguish between
the modern and legacy TLV payload.

We add a new `PackPayload` method that will be used to encode the
combined required routing TLV fields along any set of TLV fields that
were specified as part of path finding.

Finally, the `ToSphinxPath` has been extended to be able to recognize if
a hop needs the modern, or legacy payload.
2019-08-22 18:53:00 -07:00
Joost Jager
d9ec158412
routing: stricter payment result interpretation
This commit overhauls the interpretation of failed payments. It changes
the interpretation rules so that we always apply the strongest possible
set of penalties, without making assumptions that would hurt good nodes.

Main changes are:

- Apply different rule sets for intermediate and final nodes. Both types
of nodes have different sets of failures that we expect. Penalize nodes
that send unexpected failure messages.

- Distinguish between direct payments and multi-hop payments. For direct
payments, we can infer more about the performance of our peer because we
trust ourselves.

- In many cases it is impossible for the sender to determine which of
the two nodes in a pair is responsible for the failure. In this
situation, we now penalize bidirectionally. This does not hurt the good
node of the pair, because only its connection to a bad node is
penalized.

- Previously we always penalized the outgoing connection of the
reporting node. This is incorrect for policy related failures. For
policy related failures, it could also be that the reporting node
received a wrongly crafted htlc from its predecessor. By penalizing the
incoming channel, we surely hit the responsible node.

- FailExpiryTooSoon is a failure that could have been caused by any node
up to the reporting node by delaying forwarding of the htlc. We don't
know which node is responsible, therefore we now penalize all node pairs
in the route.
2019-08-17 10:24:09 +02:00
Joost Jager
e7a457f1ce
routing: query bandwidth hints before each payment attempt
Previously the bandwidth hints were only queried once per payment. This
did not allow for concurrent payments changing channel balances.
2019-08-17 10:24:07 +02:00
Joost Jager
e135cf7326
routing: penalize all node pairs for unknown outcomes
When an undecryptable failure comes back for a payment attempt, we
previously only penalized our own outgoing connection. However,
any node could have caused this failure. It is therefore better to
penalize all node connections along the route. Then at least we know for
sure that we will hit the responsible node.
2019-08-17 10:24:03 +02:00
Joost Jager
c39d7a29cd
routing/test: do not test local channel mission control
This commit updates existing tests to not rely on mission control for
pruning of local channels. Information about local channels should
already be up to date before path finding starts. If not, the problem
should be fixed where bandwidth hints are set up.
2019-08-17 10:24:01 +02:00
Joost Jager
45dacd0df1
routing: isolate failure interpretation from mission control
This commit moves the payment outcome interpretation logic into a
separate file. Also, mission control isn't updated directly anymore, but
results are stored in an interpretedResult struct. This allows the
mission control state to be locked for a minimum amount of time and
makes it easier to unit test the result interpretation.
2019-08-17 10:23:59 +02:00
Joost Jager
e7af6a077a
routing: convert to nillable failure reason
This commit converts several functions from returning a bool and a
failure reason to a nillable failure reason as return parameter. This
will take away confusion about the interpretation of the two separate
values.
2019-08-17 10:23:57 +02:00
Joost Jager
f1769c8c8c
routing: convert to node pair based
Previously mission control tracked failures on a per node, per channel basis.
This commit changes this to tracking on the level of directed node pairs. The goal
of moving to this coarser-grained level is to reduce the number of required
payment attempts without compromising payment reliability.
2019-08-13 19:21:37 +02:00
Joost Jager
a332990d2c
routing/route: add vertex constructor from bytes 2019-08-13 18:45:08 +02:00
Joost Jager
b610f417d2
routing: extended DirectedNodePair functionality 2019-08-13 18:45:06 +02:00
Joost Jager
2b4debf42b
routing/test: remove unused methods from mock 2019-08-13 18:45:02 +02:00
Joost Jager
aabd68ebcd
multi: rename FailUnknownPaymentHash to FailIncorrectDetails
Align naming better with the lightning spec. Not the full name of the
failure (FailIncorrectOrUnknownPaymentDetails) is used, because this
would cause too many long lines in the code.
2019-08-08 11:04:17 +02:00
Joost Jager
7e7b620355
routing: persist mission control data 2019-07-31 08:44:00 +02:00
Joost Jager
9e26f0d079
routing: define payment result
This commit groups together all payment result data. It is a preparation
for historical payment results being retrieved from the database.
2019-07-29 09:38:36 +02:00
Joost Jager
1507ff6590
routing: extract timestamp from applying payment result
This commit prepares for timestamps being supplied from the database for
processing of historical payment results.
2019-07-29 09:38:34 +02:00
Joost Jager
b4a7665bae
routing: provide payment id to mission control 2019-07-29 09:38:32 +02:00
Joost Jager
334b6a3bfe
routing: move unreadable failure handling into mission control 2019-07-29 09:38:30 +02:00
Joost Jager
934ea8e78d
routing: move failure interpretation into mission control 2019-07-29 09:38:26 +02:00
nsa
7762d55e80 itest+routing: updating tests to account for BlockPadding 2019-07-23 21:03:30 -04:00
nsa
3dde7bc4e2 routing: adding the BlockPadding value to sendpayment
This commit adds the BlockPadding value (currently 3) to sendpayment
calls so that if some blocks are mined while the htlc is in-flight, the
exit hop won't reject it.
2019-07-23 21:03:11 -04:00
Olaoluwa Osuntokun
8c389d13f9
Merge pull request #3197 from breez/optimize_prune_zombie_channels
Optimize prune zombie channels
2019-07-18 20:56:56 -07:00
Roei Erez
da9edc876a router: only prune disabled channels when AssumeChannelValid=true. 2019-07-18 17:05:20 +03:00
Joost Jager
34b264a3d8
routing: create PathFindingConfig for global parameters 2019-07-18 15:49:25 +02:00
Olaoluwa Osuntokun
92e14af72a
Merge pull request #3298 from joostjager/globalize-mc
routing: globalize mc
2019-07-16 17:39:36 -07:00
Roei Erez
9781ea0082 router: Optimize pruneZombieChannels.
The current approach iterates all channels in the graph in order to
filter those in need. This approach is time consuming, several seconds
on my mobile device for ~40,000 channels, while during this time the
db is locked in a transaction.

The proposed change is to use an existing functionality that utilize the
fact that channel update are saved indexed by date. This method enables
us to go over only a small subset of the channels, only those that
were updated before the "channel expiry" time and further filter
them for our need.
The same graph that took several seconds to prune was pruned, after
the change, in several milliseconds.

In addition for testing purposes I added Initiator field to the
testChannel structure to reflect the channeldEdgePolicy direction.
2019-07-16 17:48:07 +03:00
Joost Jager
8055bcf2e0
routing: report failures to mission control directly
As there is no more state kept in the payment session, failure reporting
can go straight to mission control.
2019-07-13 22:38:25 +02:00
Joost Jager
dc13da5abb
routing: move second chance logic into mission control
If nodes return a channel policy related failure, they may get a second
chance. Our graph may not be up to date. Previously this logic was
contained in the payment session.

This commit moves that into global mission control and thereby removes
the last mission control state that was kept on the payment level.

Because mission control is not aware of the relation between payment
attempts and payments, the second chance logic is no longer based
tracking second chances given per payment.

Instead a time based approach is used. If a node reports a policy
failure that prevents forwarding to its peer, it will get a second
chance. But it will get it only if the previous second chance was
long enough ago.

Also those second chances are no longer dependent on whether an
associated channel update is valid. It will get the second chance
regardless, to prevent creating a dependency between mission control and
the graph. This would interfer with (future) replay of history, because
the graph may not be the same anymore at that point.
2019-07-13 22:38:23 +02:00
Joost Jager
d31efddf1b
routing: move generateBandwidthHints 2019-07-13 22:38:21 +02:00
Joost Jager
37e2751695
routing+routerrpc: isolate payment session source from mission control 2019-07-13 22:38:19 +02:00
Joost Jager
cf3dd3fb94
routing/test: create mission control test context 2019-07-13 22:38:17 +02:00
nsa
7e6a34532e routing: add index map to distanceHeap
This commit adds the pubkeyIndices map to the distanceHeap to avoid
duplicate entries on the heap. This happened in the earlier iteration
of the findPath algorithm and would cause the driving loop to
evaluate already evaluated entries when there was no need.
2019-07-12 06:08:01 -04:00
nsa
61a1ab08fb routing+channeldb: findPath uses Vertex instead of LightningNode
This commit modifies the nodeWithDist struct to use a route.Vertex
instead of a *channeldb.LightningNode. This change, coupled with
the new ForEachNodeChannel function, allows the findPath Djikstra's
algorithm to cut down on database lookups since we no longer need
to call the FetchOtherNode function.
2019-07-12 06:08:01 -04:00
Joost Jager
2726f50d7c
htlcswitch: do not consider unknown failures an error 2019-07-11 19:49:49 +02:00
Joost Jager
418fe364de
htlcswitch: use distinct error for unreadable failures 2019-07-11 19:49:45 +02:00
Joost Jager
2b47632b26
htlcswitch+routing+routerrpc: return error source as index 2019-07-11 10:37:26 +02:00
Joost Jager
569f821142
routing/test: allow arbitrary graph source nodes 2019-07-11 10:37:22 +02:00
Olaoluwa Osuntokun
ba5fbb3c27
Merge pull request #3156 from joostjager/extended-fail
routerrpc: add more failure reasons and route hints
2019-07-08 19:12:03 -07:00
Joost Jager
5ce04091d8
routing+routerrpc+channeldb: return route on invalid payment details 2019-07-04 09:27:16 +02:00
Joost Jager
7bc56f5a7b
routing: add subscriber event constructors 2019-07-04 09:27:14 +02:00
Joost Jager
ae46fb00cb
routing+channeldb: add more failure reasons 2019-07-04 09:27:12 +02:00
nsa
678fb674eb routing: move call to PruneGraph outside of the collating loop
This commit moves the call to PruneGraph outside of the loop
that collates all of the spentOutputs. With this change, if
a node has been offline for a long period of time, resyncing
with the chain no longer takes up as much memory (1MB vs 200MB
in some cases) or time. Previously, PruneGraph was called
for every block and allocated a very large map further down
in the pruneGraphNodes function. Now, pruneGraphNodes is only
called once.
2019-07-02 21:21:28 -04:00
Johan T. Halseth
8b83f03308
rpcserver+router: log terminal sendPayment error 2019-07-01 16:22:57 -07:00
Conner Fromknecht
3a4aba463b
routing+watchtower/wtclient: prints stats once per minute 2019-06-19 20:07:11 -07:00
Olaoluwa Osuntokun
5f4accd39f
Merge pull request #3195 from halseth/routeing-nil-copy-pubkey
routing+zpay32: copy pubkeys before nilling Curve and spewing
2019-06-18 17:19:25 -07:00
Conner Fromknecht
529db69ec9
routing/router: log aggregate graph processing stats 2019-06-13 18:18:30 -07:00
Johan T. Halseth
386f8ece54
routing+zpay32: copy pubkeys before nilling Curve and spewing
Since nilling the pubkey curve will lead to a nil-pointer exception if
the key is later used for signature verification, we make sure to make a
copy before nilling and spewing.
2019-06-12 12:19:43 +02:00
Wilmer Paulino
c4546081c3
Merge pull request #3172 from joostjager/sendtoroute-timeout
routing+lnrpc: move default payment timeout out of router
2019-06-11 16:27:19 -07:00
Johan T. Halseth
5485101f9f
Merge pull request #3170 from cfromknecht/remove-router-reject-cache
routing/router: remove router-level reject cache
2019-06-11 21:52:27 +02:00
Joost Jager
2e920de292
routing+lnrpc: move default payment timeout out of router
This commit moves the default timeout out of router and thereby fixes a
bug that caused SendToRoute to not return the actual error, but a
timeout result instead. SendToRoute only tries a single route, so a
timeout should never happen.
2019-06-11 08:36:17 +02:00
Johan T. Halseth
2dea790b55
multi: make GetPaymentResult take payment hash
Used for logging in the switch, and when we remove the pending payments,
only the router will have the hash stored across restarts.
2019-06-07 16:53:32 +02:00
Conner Fromknecht
f8db49e7e4
routing/router: remove router-level reject cache
This is now redundant since we have one at the db-level
2019-06-06 13:02:16 +02:00
Joost Jager
07d289c14e
routing: add SendPaymentAsync to router 2019-06-05 12:41:51 +02:00
Joost Jager
eb2647e8fc
channeldb: add subscription to control tower
Allows other sub-systems to subscribe to payment success and fail
events.
2019-06-05 12:41:49 +02:00
Joost Jager
87d3207baf
channeldb+routing: move control tower interface to routing
This commit creates an empty shall for control tower in the routing
package. It is a preparation for adding event notification.
2019-06-05 12:41:47 +02:00
Joost Jager
19d5f8f82c
routing: move default cltv assignment out of router
This commit lifts default setting up to the rpc server level, in line
with other payment defaults.
2019-06-05 12:41:43 +02:00
Olaoluwa Osuntokun
7453dbeacc
Merge pull request #2802 from joostjager/probability
routing: probability based path finding
2019-06-05 11:30:55 +02:00
Joost Jager
054e42f680
routing+routerrpc: expose mission control parameters in lnd config
This commit exposes the three main parameters that influence mission
control and path finding to the user as command line or config file
flags. It allows for fine-tuning for optimal results.
2019-06-04 13:22:50 +02:00
Johan T. Halseth
6d52128da0
routing/router test: assert SendToRoute init values
This commit adds an assertion to the SendToRoute test that the payment
value stored to the DB during SendToRoute execution is the correct one.

This assertion would fail before the previous commit that fixed a
missing value initialization.
2019-06-04 10:34:59 +02:00
Johan T. Halseth
1161d87eec
routing/router: correct SendToRoute's amount record in DB
Previously we would mistakenly use the payment value from the dummy
LightningPayment struct, which would obviously be 0 always. Now we
instead calculate the value from the given route.
2019-06-04 10:13:33 +02:00
Joost Jager
f7982f0f4c
routing+routerrpc: expose mission control state over rpc
This commit exposes mission control state for rpc for development
purposes.
2019-06-04 10:00:27 +02:00
Joost Jager
7133f37bb8
routing: global probability based mission control
Previously every payment had its own local mission control state which
was in effect only for that payment. In this commit most of the local
state is removed and payments all tap into the global mission control
probability estimator.

Furthermore the decay time of pruned edges and nodes is extended, so
that observations about the network can better benefit future payment
processes.

Last, the probability function is transformed from a binary output to a
gradual curve, allowing for a better trade off between candidate routes.
2019-06-04 10:00:25 +02:00
Joost Jager
3349d517aa
routing: add min probability to path finding
This commit adds a new restriction to pathfinding that allows returning
only routes with a minimum success probability.
2019-06-04 10:00:23 +02:00
Joost Jager
6b70791c2d
routing: use probability source in path finding
This PR replaces the previously used edge and node ignore lists in path
finding by a probability based system. It modifies path finding so that
it not only compares routes on fee and time lock, but also takes route
success probability into account.

Allowing routes to be compared based on success probability is achieved
by introducing a 'virtual' cost of a payment attempt and using that to
translate probability into another cost factor.
2019-06-04 10:00:21 +02:00
Joost Jager
68f2a04f42
routerrpc: expose mission control reset rpc 2019-06-04 10:00:17 +02:00
Joost Jager
3db48dc53f
routing: Route String() method 2019-06-04 10:00:15 +02:00
Joost Jager
35003bd87c
routing/test: sort nodes for channel graph
This commit ensures that channel endpoints in EdgeInfo are ordered
node1 < node2 to not violate assumptions being made by dependent code.
2019-06-04 10:00:13 +02:00
Olaoluwa Osuntokun
4068e78af6
Merge pull request #2717 from cfromknecht/send-payment-payreq
lnrpc+rpcserver: display payreq via listpayments
2019-05-31 17:09:04 -07:00
Joost Jager
1b5655f7fa
Merge pull request #3113 from joostjager/sendtoroute-error-fix
routing: return structured error for send to route
2019-05-30 23:20:14 +02:00
Conner Fromknecht
078734b511
routing/router: set payreq before persisting PaymentCreationInfo 2019-05-29 16:31:12 -07:00
Joost Jager
cbfc7dd42d
routing: check findPath error 2019-05-29 14:07:00 +02:00
Joost Jager
0e273a5731
routing: return structured error for send to route 2019-05-29 14:06:58 +02:00
Johan T. Halseth
5882e54bf3
route test: add a simple unit test for the TotalFees method
Checks fees on 0, 1, and 2-hop routes.
2019-05-28 11:16:34 +02:00
Johan T. Halseth
f829d33d6f
route: return 0 fee from TotalFees for empty route.
Otherwise we would crash calling the method on empty routes.
2019-05-28 11:03:14 +02:00
Johan T. Halseth
649ee875fd
routing/router_test: add test case for ForwardingError on SendHTLC 2019-05-27 20:19:00 +02:00
Johan T. Halseth
1b788904f0
channeldb+router: record payment failure reason in db 2019-05-27 20:18:59 +02:00
Johan T. Halseth
60e2367973
routing/router_test: add TestRouterPaymentStateMachine
TestRouterPaymentStateMachine tests that the router interacts as
expected with the ControlTower during a payment lifecycle, such that it
payment attempts are not sent twice to the switch, and results are
handled after a restart.
2019-05-27 20:18:59 +02:00
Johan T. Halseth
3f76bc0629
routing+server: define PaymentSessionSource 2019-05-27 20:18:59 +02:00
Johan T. Halseth
f4306b1178
routing/payment_session+router: make PaymentSession interface 2019-05-27 20:18:58 +02:00
Johan T. Halseth
adc4640f4f
routing: export MissionControl 2019-05-27 20:18:58 +02:00
Johan T. Halseth
3323800e02
routing/router: resume payment state machine at startup
On startup the router will fetch the in-flight payments from the control
tower, and resume their execution.
2019-05-27 20:18:58 +02:00
Johan T. Halseth
677cb018c9
routing/control_tower: add FetchInFlightPayments 2019-05-27 20:18:58 +02:00
Johan T. Halseth
de1bf8a518
routing/router: persist payment state machine
This commit makes the router use the ControlTower to drive the payment
life cycle state machine, to keep track of active payments across
restarts.  This lets the router resume payments on startup, such that
their final results can be handled and stored when ready.
2019-05-27 20:18:58 +02:00
Johan T. Halseth
dd73c51a34
routing/payment_lifecycle: extract create attempt into method 2019-05-27 20:18:58 +02:00
Johan T. Halseth
e9b2182cdc
routing/payment_lifecycle: extract error handling into method 2019-05-27 20:18:58 +02:00
Johan T. Halseth
83bfaa4fb4
routing: extract payment flow into method on paymentLifecycle
This encapsulates all state needed to resume a payment from any point of
the payment flow, and that must be shared between the different stages
of the execution. This is done to prepare for breaking the send loop
into smaller parts, and being able to resume the payment from any point
from persistent state.
2019-05-27 20:18:57 +02:00
Johan T. Halseth
ae7bf2cb7b
routing/router: move sending and receiving payment result into loop 2019-05-27 20:18:57 +02:00
Wilmer Paulino
6e0084fec9
Merge pull request #3075 from cfromknecht/crtr-nil-path-curves
routing/router: nil path pubkeys before spewing
2019-05-23 20:01:54 -07:00
Xavi Soler
28021361d1
routing: add color to node update 2019-05-23 10:52:12 +02:00
Johan T. Halseth
2c1c29e060
Merge pull request #3081 from halseth/route-remove-totalfees
routing/route+multi: remove redundant TotalFees field
2019-05-20 15:00:01 +02:00
Johan T. Halseth
15bed506b1
routing/route+multi: remove redundant TotalFees field
Instead get it on demand using method TotalFees().
2019-05-16 23:58:32 +02:00
Johan T. Halseth
cd02c22977
htlcswitch+router: move deobfuscator creation to GetPaymentResult call
In this commit we move handing the deobfuscator from the router to the
switch from when the payment is initiated, to when the result is
queried.

We do this because only the router can recreate the deobfuscator after a
restart, and we are preparing for being able to handle results across
restarts.

Since the deobfuscator cannot be nil anymore, we can also get rid of
that special case.
2019-05-16 23:56:12 +02:00
Johan T. Halseth
5a8b892bb6
routing/router: extract sessionKey generation
We extract the session key such that we can later store it across
restarts.
2019-05-16 23:56:12 +02:00
Johan T. Halseth
ec087a9f73
htlcswitch+router: define PaymentResult, GetPaymentResult
This lets us distinguish an critical error from a actual payment result
(success or failure). This is important since we know that we can only
attempt another payment when a final result from the previous payment
attempt is received.
2019-05-16 23:56:12 +02:00
Johan T. Halseth
ed81cec0fa
routing/router: remove sendToSwitch method 2019-05-16 23:56:11 +02:00
Johan T. Halseth
c9e8ff6a34
switch+router+server: move NextPaymentID to router
This commit moves the responsibility of generating a unique payment ID
from the switch to the router. This will make it easier for the router
to keep track of which HTLCs were successfully forwarded onto the
network, as it can query the switch for existing HTLCs as long as the
paymentIDs are kept.

The router is expected to maintain a map from paymentHash->paymentID,
such that they can be replayed on restart. This also lets the router
check the status of a sent payment after a restart, by querying the
switch for the paymentID in question.
2019-05-16 23:56:06 +02:00
Johan T. Halseth
f1cb54f943
routing/router: define PaymentAttemptDispatcher interface
The switch satisfies this interface, and makes it easy to mock the send
method from the router.
2019-05-16 23:53:08 +02:00
Joost Jager
ba3fa94268
lnrpc+routing: Only accept a single route for SendToRoute 2019-05-15 11:54:46 +02:00
Conner Fromknecht
4d26e90ef3
routing/router: nil path pubkeys before spewing 2019-05-14 20:32:58 -07:00
Olaoluwa Osuntokun
f8c824fb1d
Merge pull request #3054 from joostjager/remove-k-shortest
lnrpc+routing: remove k shortest path finding
2019-05-10 15:51:01 -07:00
Johan T. Halseth
10070ecab7
lnwallet: make BlockChainIO.GetUTXO take cancel chan
Use quit channels as cancel chan for call to GetUTXO.
2019-05-09 14:44:47 +02:00
Joost Jager
7a5bd29a69
lnrpc+routing: remove k shortest path finding 2019-05-07 19:54:06 +02:00
Johan T. Halseth
c4415f0400
Merge pull request #3044 from cfromknecht/spelling-fixes
multi: fix spelling mistakes
2019-05-07 08:50:36 +02:00
Conner Fromknecht
3f59e31248
routing/router: break rescans on router quit
This commit reevaluates the router's quit channel between each block
during the initial call to syncGraphWithChain, which, in the worst case,
may have to scan several thousand blocks on startup if the node has not
been active for some time. Without this, attempting to stop the daemon
will not exit until the rescan has completed, which for certain backends
could be several hours.
2019-05-06 15:04:40 -07:00
Conner Fromknecht
17b2140cb5
multi: fix spelling mistakes 2019-05-04 15:35:37 -07:00
Olaoluwa Osuntokun
bab957382f
router: convert Route.ToHopPayloads() to Route.ToSphinxPath()
In this commit, we update the process that we use to generate a sphinx
packet to send our onion routed HTLC. Due to recent changes in the
`sphinx` package we use, we now need to use a new PaymentPath struct. As
a result, it no longer makes sense to split up the nodes in a route and
their per hop paylods as they're now in the same struct. All tests have
been updated accordingly.
2019-04-30 20:13:32 -07:00
Johan T. Halseth
ee257fd0eb
multi: move Route to sub-pkg routing/route 2019-04-29 14:52:33 +02:00
Wilmer Paulino
998680ad59
routing: fall back to edge MaxHTLC within findPath instead of Capacity
In this commit, we make our findPath function use an edge's MaxHTLC as
its available bandwidth instead of its Capacity. We do this as it's
possible for the capacity of an edge to not exist when operating as a
light client. For channels that do not support the MaxHTLC optional
field, we'll fall back to using the edge's Capacity.
2019-04-18 21:57:42 -07:00
Wilmer Paulino
0b0a9f4172
channeldb+routing: refactor DeleteChannelEdge to use ChannelID
In this commit, we refactor DeleteChannelEdge to use ChannelIDs rather
than ChannelPoints. We do this as the only use of DeleteChannelEdge is
when we are pruning zombie channels from our graph. When running under a
light client, we are unable to obtain the ChannelPoint of each edge due
to the expensive operations required to do so. As a stop-gap, we'll
resort towards using an edge's ChannelID instead, which is already
gossiped between nodes.
2019-04-18 21:57:41 -07:00
Wilmer Paulino
5d3621cc83
routing: skip max htlc validation when capacity is 0
Since light clients no longer have access to an edge's capacity, they
are unable to validate whether the max HTLC value for an updated edge
policy respects the capacity limit. As a stop-gap, we'll skip this
check.
2019-04-18 21:57:38 -07:00
Wilmer Paulino
f2637d63ba
routing: prevent fetching blocks for graph edges with AssumeChannelValid
This serves as a stop-gap for light clients as blocks need to be
downloaded from the P2P network, and even with caches, would be too
costly for them to verify. Doing this has two side effects however:
we'll no longer know of the channel capacity and outpoint, which are
essential for some of lnd's responsibilities.
2019-04-18 21:57:37 -07:00
Wilmer Paulino
fd1aa478a9
routing: disable FilteredChainView when AssumeChannelValid is active
In this commit, we disable attempting to determine when a channel has
been closed out on-chain whenever AssumeChannelValid is active. Since
the flag indicates that performing this operation is expensive, we do
this as a temporary optimization until we can include proofs of channels
being closed in the gossip protocol.

With this change, the only way for channels being removed from the graph
will be once they're considered zombies: which can happen when both
edges of a channel have their disabled bits set or when both edges
haven't had an update within the past two weeks.
2019-04-18 21:57:37 -07:00
Wilmer Paulino
7e7b8a1940
routing: prune graph nodes after pruning zombie channels
We do this to ensure we don't leave any stray nodes in our graph that
were part of the zombie channels that we've pruned.
2019-04-18 21:57:36 -07:00
Wilmer Paulino
7eb720e535
routing: mark policy as stale if edge remains double disabled
To ensure we don't mark an edge as live again just because an update
with a fresh timestamp was received, we'll ensure that we reject any
new updates for zombie channels if they remain disabled when running
with AssumeChannelValid.
2019-04-18 21:57:35 -07:00