Commit Graph

204 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
5075394617
Merge pull request #1706 from joostjager/errorprocessing
routing: make routing retry behaviour consistent
2018-12-03 18:29:07 -08:00
Joost Jager
b6ce03e569
routing: make routing retry behaviour consistent
Fixes the following issues:
- If the channel update of FailFeeInsufficient contains an invalid channel
  update, it is not possible to properly add to the failed channels set.
- FailAmountBelowMinimum may apply a channel update, but does not retry.
- FailIncorrectCltvExpiry immediately prunes the vertex without
  trying one more time.

In this commit, the logic for all three policy related errors is
aligned.
2018-12-03 13:23:27 +01:00
Olaoluwa Osuntokun
1fd3aac925
multi: switch from bolt packge to bbolt package for all imports 2018-11-29 20:33:49 -08:00
Joost Jager
6ba1144528
routing: move failed channels map into payment session
This is a small preparatory step towards moving mission control logic
out of router and reusing the acquired routing result data.
2018-11-29 10:31:38 +01:00
Joost Jager
71037969b7
routing: remove pruneVertexFailure function 2018-11-29 10:31:38 +01:00
Joost Jager
aca136a91c
routing: remove unused pruneVertexFailure parameters 2018-11-29 10:31:38 +01:00
Joost Jager
dd7e2e9e04
routing: move logging into applyChannelUpdate
To remove code duplicated at all call sites to check err and log.
2018-11-29 10:31:38 +01:00
Wilmer Paulino
4f45e339f1
discovery+routing: add FetchLightningNode to ChannelGraphSource interface 2018-11-11 17:48:05 -08:00
Wilmer Paulino
18ecb31983
routing/router: extend ChannelGraphSource interface with IsPublicNode
method
2018-10-24 17:28:54 -07:00
Olaoluwa Osuntokun
fbd91feace
Merge pull request #1888 from joostjager/routestruct
lnrpc+routing: fix unmarshallRoute and simplify route structure
2018-10-23 17:07:23 -07:00
Joost Jager
1d97cf1229
htlcswitch+routing: implement expiry_too_far failure
In this commit we add a check to HtlcSatifiesPolicy to verify that the
time lock for the outgoing htlc that is requested in the onion packet
isn't too far in the future.

Without this check, anyone could force an unreasonably long time lock on
the forwarding node.
2018-10-15 08:51:08 +02:00
Joost Jager
a779004a18
lnrpc+routing: fix issues with missing data in unmarshallRoute
In this commit the dependency of unmarshallRoute on edge policies being
available is removed. Edge policies may be unknown and reported as nil.
SendToRoute does not need the policies, but it does need pubkeys of the
route hops. In this commit, unmarshallRoute is modified so that it
takes the pubkeys from edgeInfo instead of channelEdgePolicy.

In addition to this, the route structure is simplified. No more connection
to the database at that point. Fees are determined based on incoming and
outgoing amounts.
2018-10-13 22:59:23 +02:00
Joost Jager
a7fec827cc
routing: validate channel update in failure message 2018-09-11 20:12:09 +02:00
Conner Fromknecht
1e473b2364
routing/router: add assume chan valid 2018-09-03 20:15:12 -07:00
Johan T. Halseth
4b04e1afd1
routing: return ErrRejected if found in reject cache
We make sure to return an error other than ErrIgnored, as ErrIgnored is
expected to only be returned for updates where we already have the
necessary information in the database.

In case of a channel ID found in the rejectCache, there was a
possibility that we had rejected an invalid update for this channel
earlier, and when attempting to add the current update we wouldn't
distinguish the failure to add from an outdated/ignored update.
2018-08-23 07:40:40 +02:00
Johan T. Halseth
18e680f192
router: simplify edge outdated logic, return ErrOutdated if old. 2018-08-23 07:40:39 +02:00
Wilmer Paulino
6c903393e5 router+server: use first hop channel id rather than node key 2018-08-20 21:04:52 -07:00
Joost Jager
3e7473f4f0 routing: backward searching 2018-08-09 20:23:40 -07:00
Joost Jager
6c918a1806 channeldb: store unknown policies in database
The commit ensures that for every channel, there will always
be two entries in the edges bucket. If the policy from one or
both ends of the channel is unknown, it is marked as such.

This allows efficient lookup of incoming edges. This is
required for backwards payment path finding.
2018-08-09 20:23:40 -07:00
Olaoluwa Osuntokun
8c0a151cec
routing: update UTXO verification to use new interface, graph pruning too 2018-07-31 21:28:55 -07:00
Olaoluwa Osuntokun
a6c814010c
routing: exit gracefully if generateSphinxPacket is passed a nil set of hops 2018-07-30 13:41:06 -07:00
Olaoluwa Osuntokun
ef56f76200
routing: demote channel update logging to trace 2018-07-23 17:01:39 -07:00
Olaoluwa Osuntokun
2e75499787
channeldb+routing: move adding shell nodes into db txn of AddChannelEdge
In this commit, we fix a slight race condition that can occur when we go
to add a shell node for a node announcement, but then right afterwards,
a new block arrives that causes us to prune an unconnected node. To
ensure this doesn't happen, we now add shell nodes within the same db
transaction as AddChannelEdge. This ensures that the state is fully
consistent and shell nodes will be added atomically along with the new
channel edge.

As a result of this change, we no longer need to add shell nodes within
the ChannelRouter, as the database will take care of this operation as
it should.
2018-07-22 21:02:53 -07:00
Olaoluwa Osuntokun
f8cbe34e93
routing: prune nodes from the channel graph on start up 2018-07-21 19:52:26 -07:00
Olaoluwa Osuntokun
6f60f139f4 multi: switch over import paths from roasbeef/* to btcsuite/* 2018-07-13 17:05:39 -07:00
Olaoluwa Osuntokun
39c1f46f85
routing: new newLogClosure to delay spew evaluation until log print time
In this commit, we update the generateSphinxPacket to use newLogClosure
to delay the spew evaluation until log print time. Before this commit,
even if we weren't on the trace logging level, the spew call would
always be evaluated.
2018-06-30 17:14:28 -05:00
Wilmer Paulino
ddf8f2cb01
routing: allow specifying a fee limit during route construction 2018-06-12 18:14:48 -07:00
Wilmer Paulino
6a6de812ba
routing: denote a payment's fee limit in millisatoshis instead 2018-06-12 18:14:47 -07:00
Sebastian Delgado
6746609ec6
Add constant and percentage-based fee limits to payments
- Extend SendRequest and QueryRoutesRequest protos
- newRoute function takes fee limit and cuts off routes that exceed it
- queryRoutes, payInvoice and sendPayment commands take the feeLimit inputs and pass them down to newRoute
- When no feeLimit is included, don't enforce any feeLimits at all (by setting feeLimit to maxValue)
2018-06-12 18:14:43 -07:00
Olaoluwa Osuntokun
eb65b0cd5a
routing: check to see if pubkey is nil before logging in sendPayment
In this commit, we now need to check to see if the pubkey is nil as if
the user specified a set of manual routes, then the dest pubkey would be
empty.
2018-06-06 20:45:56 -07:00
Olaoluwa Osuntokun
0113035f6d
routing: add new NewPaymentSessionFromRoutes function instead of interface
In this commit, we modify the recent refactoring of the mission control
sub-system to overload the existing payment session, rather than create
a brand new one. This allows us to re-use more of the existing logic, and
also feedback into mission control the failures incurred by any user
selected routes.
2018-06-06 20:45:56 -07:00
t4sk
53eb396ae9 routing/router: add SendToRoute 2018-06-06 20:45:00 -07:00
maurycy
3be08e69cf multi: 64bit aligment of atomic vars on arm/x86-32 2018-06-04 20:02:34 -07:00
Olaoluwa Osuntokun
f494433cbf
routing+server: add new QueryBandwidth method to reduce outbound failures
In this commit, we introduce a new method to the channel router's config
struct: QueryBandwidth. This method allows the channel router to query
for the up-to-date available bandwidth of a particular link. In the case
that this link emanates from/to us, then we can query the switch to see
if the link is active (if not bandwidth is zero), and return the current
best estimate for the available bandwidth of the link. If the link,
isn't one of ours, then we can thread through the total maximal
capacity of the link.

In order to implement this, the missionControl struct will now query the
switch upon creation to obtain a fresh bandwidth snapshot. We take care
to do this in a distinct db transaction in order to now introduced a
circular waiting condition between the mutexes in bolt, and the channel
state machine.

The aim of this change is to reduce the number of unnecessary failures
during HTLC payment routing as we'll now skip any links that are
inactive, or just don't have enough bandwidth for the payment. Nodes
that have several hundred channels (all of which in various states of
activity and available bandwidth) should see a nice gain from this w.r.t
payment latency.
2018-05-14 16:23:54 -07:00
Conner Fromknecht
eaa8cdf916
routing/router: improve validation barrier shutdown
This commit improves the shutdown of the router's
pending validation tasks, by ensuring the pending
tasks exit early if the validation barrier
receives a shutdown request.

Currently, any goroutines blocked by WaitForDependants
will continue execution after a shutdown is signaled.
This may lead to unnexpected behavior as the relation
between updates is no longer upheld. It also has the
side effect of slowing down shutdown, since we
continue to process the remaining updates.

To remedy this, WaitForDependants now returns an error
that signals if a shutdown was requested. The blocked
goroutines can exit early upon seeing this error,
without also signaling completion of their task to
the dependent tasks, which should will now properly
wait to read the validation barrier's quit signal.
2018-05-08 16:32:08 -07:00
Olaoluwa Osuntokun
bd9f1b597e
routing: prune edges instead of vertexes in response to an FailUnknownNextPeer error
In this commit we fix an lingering bug in the Mission Control logic we
execute in response to the FailUnknownNextPeer error. Historically, we
would treat this as the _next_ node not being online. As a result, we
would then prune away the vertex from the current reachable graph all
together. It was recently realized, that this would at times be a bit
_tooo_ aggressive if the channel we attempt to route over was faulty,
down, or the incoming node had connectivity issues with the outgoing
node.

In light of this realization, we'll now instead only prune the _edge_
that we attempted to route over. This ensures that we'll continue to
explore the possible edges. Additionally, this guards us against failure
modes where nodes report FailUnknownNextPeer to other nodes in an
attempt to more closely control our retry logic.

This change is a stop gap on the path to a more intelligent set of
autopilot heuristics.

Fixes #1114.
2018-04-23 17:51:02 -07:00
Wilmer Paulino
7965247db1
routing: add additionalEdges field to a missionControl's paymentSession
In this commit, we introduce the ability for payment sessions to store
an additional set of edges that can be used to assist a payment in
successfully reaching its destination.
2018-04-20 04:01:31 -04:00
Wilmer Paulino
5ddee85479
routing: prevent logging the public key params within the routing hints 2018-04-20 04:01:30 -04:00
Wilmer Paulino
1e5659e5f4
routing: introduce routing hints to lightning payments
In this commit, we add a new field of routing hints to payments over the
Lightning Network. These routing hints can later be used within the path
finding algorithm in order to craft a path that will reach the
destination succesfully.
2018-04-20 04:01:29 -04:00
Dimitris Tsapakidis
4009f7f874 multi: fix typos in comments 2018-04-17 19:03:27 -07:00
practicalswift
663c396235 multi: fix a-vs-an typos 2018-04-17 19:02:04 -07:00
Olaoluwa Osuntokun
a6ffe999c6
routing: prune vertex, not ege after repeated FeeInsufficientErrors
In this commit, we modify the way we handle FeeInsufficientErrors to
more aggressively route around nodes that repeatedly return the same
error to us. This will ensure we skip older nodes on the network which
are running a buggier older version of lnd. Eventually most nodes will
upgrade to this new version, making this change less needed.

We also update the existing test to properly use a multi-hop route to
ensure that we route around the offending node.
2018-04-06 14:52:02 -07:00
Olaoluwa Osuntokun
f935bd0baf
routing: add vertex pruning for non-final CLTV related errors
In this commit, we add vertex pruning for any non-final CLTV error.
Before this commit, we assumed that any source of this error was due to
the local node setting the incorrect time lock. However, it’s been
recently noticed on main net that there’re a set of nodes that seem to
not be properly scanned to the chain. Without this patch, users aren’t
able to route successfully as atm, we’ll stop all path finding attempts
if we encounter this.
2018-03-23 17:55:14 -07:00
Olaoluwa Osuntokun
635780858e
routing: add rejected spent outputs to the reject cache 2018-03-23 15:50:27 -07:00
Olaoluwa Osuntokun
93b04b39fe
routing: account for remaining routing onion errors in SendPayment
In this commit, we address a number of edge cases that were unaccounted
for when responding to errors that can be sent back due to an HTLC
routing failure. Namely:

   * We’ll no longer stop payment attempts if we’re unable to apply a
channel update, instead, we’ll log the error, prune the channel and
continue.
    * We’ll no remember which channels were pruned due to insufficient
fee errors. If we ever get a repeat fee error from a channel, then we
prune it. This ensure that we don’t get stuck in a loop due to a node
continually advertising the same fees.
   * We also correct an error in which node we’d prune due to a
temporary or permanent node failure. Before this commit, we would prune
the next node, when we should actually be pruning the node that sent us
the error.

Finally, we also add a new test to exercise the fee insufficient error
handling and channel pruning.

Fixes #865.
2018-03-21 15:23:48 -07:00
Olaoluwa Osuntokun
363cec7012
routing: add new PayAttemptTimeout field to LightningPayment
In this commit, we add a new field to the LightningPayment struct:
PayAttemptTimeout. This new field allows the caller to control exactly
how much time should be spent attempting to route a payment to the
destination. The default value we’ll use is 60 seconds, but callers are
able to specify a diff value. Once the timeout has passed, we’ll
abandon th e payment attempt, and return an error back to the original
caller.
2018-03-21 15:23:45 -07:00
Olaoluwa Osuntokun
800eea931f
build+multi: switch from bolt to bbolt
In this commit, we switch from boltbd/bolt to coreos/bbolt as the
former is no longer being actively maintained.
2018-03-10 19:01:13 -08:00
Olaoluwa Osuntokun
aa0410c90a
routing: add new methods to check the freshness of an edge/node
In this commit, we add a set of new methods to check the freshness of
an edge/node. This will allow callers to skip expensive validation in
the case that the router already knows of an item, or knows of a
fresher version of that time.

A set of tests have been added to ensure basic correctness of these new
methods.
2018-03-06 13:34:48 -05:00
Olaoluwa Osuntokun
ad0f5b31f6
routing: return cached route response in FindRoutes if enough routes
In this commit, we modify the caching structure to return a set of
cached routes for a request if the number of routes requested is less
than or equal to the number of cached of routes.
2018-02-12 16:22:28 -08:00
Olaoluwa Osuntokun
8a29c01354
routing: modify FindRoutes to take a max number of routes to return 2018-02-12 16:19:52 -08:00
Olaoluwa Osuntokun
b54b8dd7f1
routing: reject any new announcements which were pruned as zombies 2018-02-06 20:14:34 -08:00
Olaoluwa Osuntokun
6d05cb5aae
routing: extract zombie pruning to distinct method 2018-02-06 20:14:34 -08:00
Olaoluwa Osuntokun
1f3124f48a
routing: use [33]byte instead of *btcutil.Publickey for SendToSwitch
With this change, we can avoid unnecessarily serializing a public key.
2018-02-06 20:14:33 -08:00
Olaoluwa Osuntokun
6751cd8b9f
routing: update package to account for recent channeldb API changes 2018-02-06 20:14:32 -08:00
Daniel McNally
8543497dcc multi: fixing it's/its typos in comments 2018-02-06 19:13:07 -08:00
Alex Bosworth
bbc2ecd580 routing: typo fix
"we're closed" should be "were closed"
2018-02-06 19:12:10 -08:00
practicalswift
a93736d21e multi: comprehensive typo fixes across all packages 2018-02-06 19:11:11 -08:00
Olaoluwa Osuntokun
0a4de859a2
discovery+routing: reduce number of active validation barrier jobs
In order to reduce high CPU utilization during the initial network view
sync, we slash down the total number of active in-flight jobs that can
be launched.
2018-01-28 14:55:32 -08:00
Johan T. Halseth
b07f242dc2
routing: use multimutex.Mutex instead of package internal mutex 2018-01-24 10:26:40 +01:00
Olaoluwa Osuntokun
eba6ba0760
routing: properly prune edges that return a FailPermanentChannelFailure
In this commit, we now account for a case where a node sends us a
FailPermanentChannelFailure during a payment attempt. Before this
commit, we wouldn’t properly prune the edge to avoid re-using it. We
remedy this by properly attempting to prune the edge if possible.
Future changes well send a FailPermanentChannelFailure in the case that
we ned to go on-chain for an outgoing HTLC, and cancel back the
incoming HTLC.
2018-01-22 19:19:34 -08:00
Johan T. Halseth
0b8e7ff836
routing: embed FeeSchema in ChannelPolicy
This commit embeds the FeeSchema within the new
struct ChannelPolicy, which also contains the
TimeLockDelta for a channel.
2018-01-12 22:56:31 +01:00
Olaoluwa Osuntokun
d70e4bb0a0
routing: account for case where final destination send TemporaryChannelFailure
In this commit, we fix an existing bug that could cause lnd to crash if
we sent a payment, and the *destination* sent a temp channel failure
error message. When handling such a message, we’ll look in the nextHop
map to see which channel was *after* the node that sent the payment.
However, if the destination sends this error, then there’ll be no entry
in this map.

To address this case, we now add a prevHop map. If we attempt to lookup
a node in the nextHop map, and they don’t have an entry, then we’ll
consult the prevHop map.

We also update the set of tests to ensure that we’re properly setting
both the prevHop map and the nextHop map.
2018-01-10 15:15:55 -08:00
Johan T. Halseth
0571918d3d
routing: process only single ChannelEdgePolicy per channelID concurrently
This commit adds synchronization around the processing
of multiple ChannelEdgePolicy updates for the same
channel ID at the same time.

This fixes a bug that could cause the database access
HasChannelEdge to be out of date when the goroutine
came to the point where it was calling UpdateEdgePolicy.
This happened because a second goroutine would have
called UpdateEdgePolicy in the meantime.

This bug was quite benign, as if this happened at
runtime, we would eventually get the ChannelEdgePolicy
we had lost again, either from a peer sending it to
us, or if we would fail a payment since we were using
outdated information. However, it would cause some of
the tests to flake, since losing routing information
made payments we expected to go through fail if this
happened.

This is fixed by introducing a new mutex type, that
when locking and unlocking takes an additional
(id uint64) parameter, keeping an internal map
tracking what ID's are currently locked and the
count of goroutines waiting for the mutex. This
ensure we can still process updates concurrently,
only avoiding updates with the same channel ID from
being run concurrently.
2018-01-09 13:09:29 +01:00
Olaoluwa Osuntokun
98f63cdce1
routing: add new paymentSession companion struct to missionControl
In this commit, we modify the pruning semantics of the missionControl
struct. Before this commit, on each payment attempt, we would fetch a
new graph pruned view each time. This served to instantly propagate any
detected failures to all outstanding payment attempts. However, this
meant that we could at times get stuck in a retry loop if sends take a
few second, then we may prune an edge, try another, then the original
edge is now unpruned.

To remedy this, we now introduce the concept of a paymentSession. The
session will start out as a snapshot of the latest graph prune view.
Any payment failures are now reported directly to the paymentSession
rather than missionControl. The rationale for this is that
edges/vertexes pruned as result of failures will never decay for a
local payment session, only for the global prune view. With this in
place, we ensure that our set of prune view only grows for a session.

Fixes #536.
2018-01-08 19:50:24 -08:00
Matt Drollette
adf0d98194 multi: fix several typos in godoc comments 2017-12-17 18:40:05 -08:00
Olaoluwa Osuntokun
455568279b
routing: ensure that new blocks connected monotonically increase in height
This commit fixes an existing bug within the ChannelRouter. Prior to
this commit, if the chain view skipped blocks or for some reason we had
a gap in blocks delivered, then we would simply accept them. This had
the potential to cause us to miss on-chain channel closure events. To
remedy this, we won’t process any blocks whose heights aren’t
*strictly* increasing.

A longer term fix would be to have the ChainView take a block height,
and re-dispatch any notifications from that height to the current
height.
2017-12-05 17:46:21 -08:00
Olaoluwa Osuntokun
ffd6b65ec1
routing: ensure access to r.bestHeight is thread-safe 2017-12-05 17:46:20 -08:00
Olaoluwa Osuntokun
73ccb76853
routing: update ChannelUpdate handling to recognize lnwire.ChanUpdateFlag 2017-11-30 22:24:35 -08:00
Olaoluwa Osuntokun
7757721a92
routing: don't dispatch notification if error is non nil after processing ann 2017-11-29 17:53:09 -08:00
Olaoluwa Osuntokun
5bc9f07d12
routing: validate incoming announcements in parallel 2017-11-29 16:44:14 -08:00
Olaoluwa Osuntokun
fcd5e4aa41
routing: when updating chain view filter on restart, use best height as height hint
In this commit, we modify the high value passed into UpdateFilter upon
restart. Before this commit, we would pass in the prune height, which
would cause a full rescan within the FilteredChainView if the best
height as > than the prune height. This was redundant as we would
shortly carry out a manual rescan in the method below. To fix this, we
now pass in the bestHeight, this isn’t an issue as the
syncGraphWithChain method will manually scan up to that best height.
2017-11-29 16:26:39 -08:00
Olaoluwa Osuntokun
f189e2395a
routing: if the graph has never been pruned, prune with current height
In this commit we ensure that if this is the first time that the
ChannelRouter is starting, then we set the pruned height+hash to the
current best height. Otherwise, it’s possible that we attempt to update
the filter with a 0 prune height, which will restart a historical
rescan unnecessarily.
2017-11-15 18:19:39 -08:00
Olaoluwa Osuntokun
2b052cc889
routing: only update the filter if we have a non-zero chain view
In this commit we ensure that we only update the filter, if we have a
non-zero chain view. Otherwise, a mini rescan may be kicked off
unnecessarily  if we don’t yet know of any channels yet in the greater
graph.
2017-11-15 18:17:51 -08:00
Laura Cressman
39d38da732 discovery: create deDupedAnnouncements struct in gosspier.go
For Part 1 of Issue #275. Create isolated private struct in
networkHandler goroutine that will de-duplicate
announcements added to the batch. The struct contains maps
for each of channel announcements, channel updates, and
node announcements to keep track of unique announcements.

The struct has a Reset method to reset stored announcements, an
AddMsg(lnwire.Message) method to add a new message to the current
batch, and a Batch method to return the set of de-duplicated
announcements.

Also fix a few minor typos.
2017-11-15 16:50:19 -08:00
Conner Fromknecht
153794adb0
routing/router: sets bestHeight before filtering chain
This commit alters the behavior of the router's logic on
 startup, ensuring that the chain view is filtered using
 the router's latest prune height. Before, the chain was
 filtered using the bestHeight variable, which was
 uninitialized, benignly forcing a rescan from genesis.
 In tracking down this, we realized that we should
 actually be using the prune height, as this is
 representative of the channel view loaded from disk.
 The best height/hash are now only used during
 startup to determine if we are out of sync.
2017-11-11 15:53:38 -08:00
Olaoluwa Osuntokun
9294358b5b
routing: populate the chain filter before calling syncGraphWithChain
In this commit we fix an existing bug within the ChannelRouter. Before
this commit, we would sync our graph prune state, *then* update the
cain filter. This is incorrect as the blocks we manually pruned may
have included channel closing transactions. As a result, we would miss
the pruning of a set of channels, and assume that they were still
active.

In this commit, we fix this by reversing the order: we first update the
chain filter and THEN sync the channel graph.
2017-11-06 16:10:24 -08:00
Johan T. Halseth
256db86b02
routing: make channel router aware of stale blocks
This commit make the channel router handle the case where
it wakes up on a stale branch, and also the case where a
reorg happens while it is active.
2017-11-03 00:05:32 +01:00
Olaoluwa Osuntokun
176fde4ec0
routing: modify applyChannelUpdate to not error out if update is stale
In this commit we fix a slight bug within the existing SendPayment loop
which would cause the wrong error to be returned to users. Prior to
this commit, if we received an update identical to what we were already
aware of, then that error would be returned rather than the
ForwardingError that encapsulated this update.

In this commit with remedy this by properly returning the exact error.

Partially fixes #391.
2017-10-24 18:23:04 -07:00
Olaoluwa Osuntokun
25614f67f8
routing: restore in memory selfNode within the ChannelRouter
In this commit we restore the in memory ChannelRouter as we’ll no
dynamically set the ChannelRouter’s pointer within he spec path finding
test example.
2017-10-22 18:36:59 -07:00
Olaoluwa Osuntokun
76ec41103e
routing: extend missionControl.RequestRoute to take final CLTV delta 2017-10-22 18:36:58 -07:00
Olaoluwa Osuntokun
aee1619488
routing: add new FinalCLTVDelta attribute to SendPayment
In this commit, we’ll now optionally allow the user to pass in the CLTV
delta value specified by the recipient a payment. If the value isn’t
specified, then we’ll use the current global default for the payment.
2017-10-22 18:36:51 -07:00
Olaoluwa Osuntokun
c8f45e3a04
routing: add new param to FindRoutes for CLTV expiry for final hop
In this commit, we modify the FindRoutes method to pass in the CLTV
expiry for the final hop. If the value isn’t passed in, then we’ll use
the current global default value in place.
2017-10-22 18:36:50 -07:00
Olaoluwa Osuntokun
65482faa79
routing: remove the selfNode attribute from memory
In this commit, we’ve removed the selfNode attribute from memory, as
the set of new tests we’ll write, will depend on us being able to
switch the source node dynamically from the database itself.
2017-10-22 18:36:48 -07:00
Olaoluwa Osuntokun
b4273d1eaa
routing: abstract path finding behind mission control
In this commit, from the PoV of the SendPayment method we now delegate
all path finding+verification to missionControl. This change doesn’t
materially affect anything, it simply expands the abstraction to make
way for future features that more heavily utilize mission control.
2017-10-17 19:44:17 -07:00
Olaoluwa Osuntokun
8ef829ed80
routing: modify SendPayment loop to be lazy, iterative, and use missionControl
In this commit we modify the SendPayment loop to optimize for
time-to-first-payment-success-or-failure. The prior logic would first
attempt to find at least 100 routes to the destination, then
iteratively prune them away as errors were encountered. In this commit,
we modify this approach to instead take a lazy approach: we first find
the current “best” path, attempt to send to that, and if an error
occurs we prune a section of the graph by reporting to missionControl,
then continue.

With this new approach, if the first known path has sufficient
capacity, and is available, then the payment speed is greatly improved
from the PoV of users. Additionally, we avoid the excessive computation
of crawling most of the graph in the k-shortest paths loop. With the
decay on missionControl, all routes will now feed information into the
central knowledge hung, allowing all payments to iteratively find out
the inactive portions of the payment graph.
2017-10-16 19:05:47 -07:00
Olaoluwa Osuntokun
276f2e467b
routing: end path finding on an additional set of critical-ish errors 2017-10-16 18:58:35 -07:00
Olaoluwa Osuntokun
b29a73a0dd
routing: don't prune our own channels during zombie channel collection
This commit is a precautionary commit which ensure that we don’t
attempt to prune our _own_ channels during zombie channel collection.
2017-10-16 18:14:01 -07:00
Olaoluwa Osuntokun
51b072c4b5
routing: return proper error if encounter non ForwardingError in SendPayment 2017-10-10 22:19:28 -07:00
Olaoluwa Osuntokun
646f79f566
routing: perform path finding inside a single DB transaction
This commit modifies the path finding logic such that all path finding
is done inside a _single_ database transaction. With this change, we
ensure that we don’t end up possibly creating hundreds of database
transactions slowing down the path finding and payment sending process
all together.
2017-10-10 22:19:27 -07:00
Olaoluwa Osuntokun
ce7179a468
routing: add basic route pruning in response to HTLC onion errors
This commit adds basic route pruning in response to HTLC onion errors.
With this new change, the router will now prune routes in response to
HTLC errors, which will reduce the time to payment success, and also
avoid a bunch of unnecessary network traffic.

We now respond to two errors lnwire.FailTemporaryChannelFailure and
lnwire.FailUnknownNextPeer. In response to the first error, we’ll prune
all routes that contain the channel which was unable to be routed over.
In response to the second error we’ll prune all routes that contain the
node which couldn’t be found.
2017-10-10 22:19:25 -07:00
Olaoluwa Osuntokun
8d7f3943bb
routing: add two new methods to filter routes based on node/channel 2017-10-10 22:19:24 -07:00
Olaoluwa Osuntokun
f6ac31281b
routing: also include the source node in the nextHopMap index
In this commit we modify the newRoute function to also add the source
node to the nextHopMap index. With this addition the indexes will now
allow the router to react based on failures that occur during the
_first_ hop, meaning the channel directly attached to the source node.
2017-10-10 22:19:23 -07:00
Olaoluwa Osuntokun
3b7855e449
routing: implement 2-week zombie channel pruning
This commit implements 2-week zombie channel pruning. This means that
every GraphPruneInterval (currently set to one hour), we’ll scan the
channel graph, marking any channels which haven’t had *both* edges
updated in 2 weeks as a “zombie”. During the second pass, all “zombie”
channel are removed from the channel graph all together.

Adding this functionality means we’ll ensure that we maintain a
“healthy” network view, which will cut down on the number of failed
HTLC routing attempts, and also reflect an active portion of the graph.
2017-10-04 20:46:09 -07:00
Olaoluwa Osuntokun
e81689057a
discovery+routing: remove DeleteEdge from ChannelGraphSource interface
This commit removes the recently added DeleteEdge method from the
ChannelGraphSource interface as it’s no longer needed.
2017-10-04 20:46:08 -07:00
Brandon
3907ae65c2 routing+discovery: implement 2-week network view pruning 2017-10-04 20:40:21 -07:00
Laura Cressman
156772d04a channeldb: use binary.Read/Write with bools in channel.go
Use binary.Read/Write in functions to serialize and deserialize
channel close summary and HTLC boolean data, as well as in
methods to put and fetch channel funding info. Remove lnd
implementations of readBool and writeBool as they are no
longer needed. Also fix a few minor typos.
2017-10-02 23:13:47 -07:00
Laura Cressman
29687f49eb routing: replace sort.Sort with sort.Slice in router.go
Use sort.Slice in FindRoutes function in routing/router.go, as part
of the move to use new language features. Remove sortableRoutes type
wrapper for slice of Routes since it is no longer needed to sort routes.
2017-10-02 23:13:47 -07:00
Olaoluwa Osuntokun
3ba70fe6ec
routing: add preliminary version of more intelligent payment error handling
This commit modifies the way we currently interpret errors when sending
payments via the SendToSwitch method. We split the errors into two
broad sections: critical errors which cause us to abandon the payment
dispatch all together, and errors which are transient meaning we should
continue trying to remainder of the returned routes.

Note that we haven’t yet properly implemented all the necessary
measures such as filtering edges that are detected as being temporarily
inactive, etc.

This change should correct erroneous behavior such as continuing to try
all available routes in the face of an invalid payment hash error and
the like.
2017-10-02 22:14:13 -07:00
Olaoluwa Osuntokun
486b464e1c
routing: move path caching into FindRoutes
This commit modifies the way we do path caching. Rather than only
caching within SendPayment, we now cache routes within FindRoutes. This
is more natural as SendPayment eventually calls FindRoute. As a result
of this commit, queries to FindRoute are now properly cached, speeding
up applications which are focused on graph visualization or querying
rather than sending payments.
2017-10-02 22:14:13 -07:00
John Griffith
1057a1a7c3 routing: handle onion errors in ChannelRouter 2017-10-02 22:13:05 -07:00