Commit Graph

67 Commits

Author SHA1 Message Date
Conner Fromknecht
c1b9b272cd
input/size: assert witness size constants
This commit introduces a new test case that asserts all of the witness
size constants currently in the codebase. We also reintroduce the
AcceptedHtlcSuccessWitnessSize and OfferedHtlcTimeoutWitnessSize
constants that were recently removed for the sake of completeness.

In asserting the witnes sizes, there were three uncovered discrepancies:
 * OfferedHtlcSuccessWitnessSize overestimated by about 30% because it
   included an extra signature in the calculation.

 * ToLocalPenaltyWitnessSize was underestimated by one byte, because it
   was missing the length byte for the OP_TRUE. This has implications
   the watchtower protocol since the client and server are assumed to
   share the same weight estimates used for signing. This commit keeps
   the current behavior, with the intention of rolling out negotiation
   for which weight estimate to use for a given session.

 * AcceptedHtlcScriptSize was underestimated by one byte because it was
   missing a length byte for the value 32 pushed on the stack when
   asserting the preimage's length. This affects all AcceptedHtlc*
   witness sizes.
2020-04-10 15:34:27 -07:00
Conner Fromknecht
0f94b8dc62
multi: return input.Signature from SignOutputRaw 2020-04-10 14:27:35 -07:00
Joost Jager
b3afa0c9ed
sweep: log sweep tx id and full list of inputs
To facilitate debugging.
2020-03-27 07:42:03 +01:00
Johan T. Halseth
c1d00a0c9b
Merge pull request #4101 from ErikEk/typo_fixes_trivial
trivial: typo fixes
2020-03-19 21:36:38 +01:00
ErikEk
4e47181b99 trivial: typo fix 2020-03-19 05:43:49 +01:00
Olaoluwa Osuntokun
46cec2fdc0
sweep: convert to use new kvdb abstraction 2020-03-18 19:35:10 -07:00
Joost Jager
3b517390d8
cnct+sweeper: give contract court access to relay fee
Relay fee is needed later to sweep anchors at the minimum fee rate.
2020-03-17 16:25:37 +01:00
Joost Jager
29e1489179
sweep: leave exclusive group unchanged on parameter update
Exclusive group is a static property that doesn't need to be updated.
Requiring the exclusive group to be passed into UpdateParams creates a
burden for the caller to make sure they supply the existing group.

This change will be beneficial for users that bump anchor sweeps that
have exclusive groups set.
2020-03-17 14:19:39 +01:00
Joost Jager
1c93e9e03d
sweep: isolate min fee rate bucket 2020-03-17 14:19:37 +01:00
Johan T. Halseth
8c0deb81c2
input+lnwallet: Add scripts for CSV delayed HTLC outputs
We also increase the witness size for these types to account for the 3
extra bytes. The size won't be correct in all cases, but it is just an
upper bound in any case.
2020-03-09 12:10:58 +01:00
Joost Jager
9dc349488b
sweep: add exclusive groups
Allows certain sweep inputs to be kept in separate transactions at all
times. This is a preparation for anchor outputs. Before the commitment
tx confirms, there are three potential anchors that can be cpfp'ed. We
want to cpfp them all, but if done in the same transaction, the
transaction would guaranteed to be invalid. Exponential backoff would
eventually get the txes published, but having exclusive groups makes the
process faster.
2020-02-13 09:52:21 +01:00
Joost Jager
69a6107d06
sweep: log full parameter struct 2020-02-12 09:59:43 +01:00
Joost Jager
b0aae13d70
sweep: allow force sweeps 2020-01-15 16:56:44 +01:00
Joost Jager
14237f5fd4
sweep: create add constraints
This refactor prepares for the addition of specific constraints for
force sweep inputs.
2020-01-15 16:56:42 +01:00
Joost Jager
16832cefa3
sweep: allow updating all sweep parameters
This is a preparation for adding additional parameters besides the fee
preference.
2020-01-15 16:56:40 +01:00
Joost Jager
280611ab6e
sweep+walletrpc+lncli: report requested fee preference for pending sweeps
Previously only the fee rate used for the last sweep (the sweep bucket
average) was reported. This commit adds the request fee preference to
the report, which is used to select a bucket and the sweep tx fee rate.
2020-01-09 14:56:08 +01:00
Joost Jager
e01600fdb8
sweep: add wallet inputs to reach dust limit
This commit allows sweeper to sweep inputs that on its own are not able
to form a sweep transaction that meets the dust limit.

This functionality is useful for sweeping small outputs. In the future,
this will be particularly important to sweep anchors. Anchors will
typically be spent with a relatively large fee to pay for the parent tx.
It will then be necessary to attach an additional wallet utxo.
2019-12-17 22:00:39 +01:00
Joost Jager
8353b6fd6e
sweep: extract sweepCluster method
Prepares for adding another level of nesting.
2019-12-17 22:00:37 +01:00
Joost Jager
34c9193bfc
sweep: create wallet interface
We need access to additional wallet functionality. This commit creates
an interface to prevent passing in multiple function pointers.
2019-12-17 22:00:35 +01:00
Joost Jager
b325aae4f2
sweep: extract positive input set struct
A refactoring that introduces no functional changes. This prepares for
the addition of wallet utxos to push the sweep tx above the dust limit.

It also enabled access to input-specific sweep parameters during tx
generation. This will be used in later commits to control the sweep
process.
2019-12-17 22:00:34 +01:00
Joost Jager
071c57d4a4
sweep: embed input.Input interface
Get rid of needless referencing of the embedded object.
2019-12-13 12:02:44 +01:00
Joost Jager
38adfd7ecc
sweep: create sweep parameters struct
Prepares for adding more input-specific sweep parameters.
2019-12-13 12:02:42 +01:00
Joost Jager
e2bf6b49e9
sweep: fix bucket clustering
Fixes a bug where bucket sizes were not the configured size, but the
configured size plus the min relay fee.
2019-12-13 11:08:09 +01:00
Joost Jager
50078216ca
sweep: use bucket ids
Using a fee rate just as an identifier can be confusing.
2019-12-13 11:08:07 +01:00
Olaoluwa Osuntokun
777ed104a3
chainfee: create new chainfee package extracting fees from lnwallet
In this commit, we create a new chainfee package, that houses all fee
related functionality used within the codebase. The creation of this new
package furthers our long-term goal of extracting functionality from the
bloated `lnwallet` package into new distinct packages. Additionally,
this new packages resolves a class of import cycle that could arise if a
new package that was imported by something in `lnwallet` wanted to use
the existing fee related functions in the prior `lnwallet` package.
2019-10-31 16:41:57 -07:00
Oliver Gugger
05096b0c2d
input+sweep: log input witness types instead of CSV/CLTV count 2019-10-23 17:09:31 +02:00
Oliver Gugger
fb0051a318
input+sweep: rework witness type into an interface 2019-10-14 15:32:54 +02:00
Oliver Gugger
8e4a897a60
sweep: use chain notifier instead of chain IO for best block
Because the BestBlock method of ChainIO is not exposed through any
RPC we want to get rid of it so we can use the sweeper outside of
lnd too. Since the chain notifier now also delivers the current best
block we don't need the BestBlock method any more.
2019-10-14 15:32:54 +02:00
Oliver Gugger
b6dda143d0
sweep: use bbolt DB directly instead of channeldb 2019-10-14 15:32:53 +02:00
Oliver Gugger
4190146066
sweep: add test to make sure fee estimation is correct 2019-10-14 15:32:53 +02:00
Joost Jager
b58dbb2d70
multi: fix canceled spelling 2019-10-03 17:27:36 +02:00
Olaoluwa Osuntokun
bee777ab5f
input: update CommitSpendNoDelay to be aware of tweakless commits, add new witness type
In this commit, we update the `CommitSpendNoDelay` method to be aware of
the alternate spending mechanism for commitments that don't have a tweak
for the remote party's non-delay output. We also add a new witness type
so callers can convey their expected signing path.
2019-09-25 18:25:37 -07:00
Joost Jager
3d7de2ad39
multi: remove dead code 2019-09-10 17:21:59 +02:00
Wilmer Paulino
8b398bdbd1
sweep: remove unnecessary use of FetchInputInfo within CraftSweepAllTx
We already have all of the information required for the outputs from the
ListUnspent method.
2019-08-22 13:49:40 -07:00
Wilmer Paulino
e69d93949c
sweep: allow fee bumps of inputs/transactions within UtxoSweeper
In this commit, we introduce the ability to bump the fee of an input
within the UtxoSweeper. Once its fee rate is bumped, a replacement
transaction (RBF) will be broadcast with the newer fee rate (assuming
the newer fee rate is high enough to be valid), replacing any
conflicting lower fee rate transactions.

Note that this currently doesn't validate the fee preference of the
bump. This responsibility is delegated to the caller, so care must be
taken to ensure the new fee preference is sufficient.
2019-06-11 15:06:38 -07:00
Wilmer Paulino
f206444e96
sweep: assert transaction fee rate in TestDifferentFeePreferences 2019-06-11 15:06:36 -07:00
Wilmer Paulino
c70858dc46
sweep: prevent default fee preference fallback
We want to make sure clients are aware of their own fee preferences,
rather than relying on defaults.
2019-06-11 15:06:35 -07:00
Wilmer Paulino
d75fac26bc
sweep: expose pending input sweeps within the UtxoSweeper 2019-06-05 12:10:32 -07:00
Wilmer Paulino
50a8f188a3
sweep: add lastFeeRate field to PendingInput
This will serve useful when exposing the pending inputs over RPC, since
we currently don't keep track of the last fee rate used for an input.
2019-06-05 12:10:31 -07:00
Wilmer Paulino
682aebdd53
sweep: broadcast sweep transactions in descending fee rate order
In this commit, we address another issue that arose with the
introduction of the fee rate buckets. We'll use an example to explain
the problem space:

Let's say we have inputs A, B, and C within the same fee rate bucket. If
A's fee rate is bumped to a higher bucket, then it's currently possible
for the lower fee rate bucket to be swept first, which would produce an
invalid RBF transaction since we're removing an input from the original
without providing a higher fee. By the time we get to the higher fee
rate bucket, we broadcast a valid RBF transaction _only_ sweeping input
A, which would evict the transaction sweeping inputs B and C from the
mempool.

To prevent this eviction, we can simply broadcast the higher fee rate
sweep transactions first, to ensure we have valid RBF transactions.
2019-05-24 15:30:39 -07:00
Wilmer Paulino
5172a5e255
multi: support arbitrary client fee preferences to UtxoSweeper
In this commit, we introduce support for arbitrary client fee
preferences when accepting input sweep requests. This is possible with
the addition of fee rate buckets. Fee rate buckets are buckets that
contain inputs with similar fee rates within a specific range, e.g.,
1-10 sat/vbyte, 11-20 sat/vbyte, etc. Having these buckets allows us to
batch and sweep inputs from different clients with similar fee rates
within a single transaction, allowing us to save on chain fees.

With this addition, we can now get rid of the UtxoSweeper's default fee
preference. As of this commit, any clients using the it to sweep inputs
specify the same fee preference to not change their behavior. Each of
these can be fine-tuned later on given their use cases.
2019-05-24 15:30:38 -07:00
Wilmer Paulino
138d9b68f0
lnwallet+sweep: add String method to FeePreference 2019-05-24 15:30:36 -07:00
Johan T. Halseth
10070ecab7
lnwallet: make BlockChainIO.GetUTXO take cancel chan
Use quit channels as cancel chan for call to GetUTXO.
2019-05-09 14:44:47 +02:00
Johan T. Halseth
beb5d14ed9
lnwallet/btcwallet: add compile time check for BlockChainIO interface 2019-05-09 14:44:41 +02:00
Joost Jager
9e012ecc93
multi: move Input interface and related code
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
2019-01-31 13:25:33 +01:00
Olaoluwa Osuntokun
eda6ed224f
sweep: add unit tests for TestDetermineFeePerKw and CraftSweepAllTx
Along the way we also extend the mockFeeEstimator to be able to return a
fee rate for a specified confirmation target.
2019-01-09 15:55:28 -08:00
Olaoluwa Osuntokun
9c29e61826
sweep: add new CraftSweepAllTx method to fully withdrawal from a wallet
In this commit, we add a new function, CraftSweepAllTx. This function
allows callers to craft a transaction which sweeps ALL outputs from the
wallet to a single target address. It can either be used for UTXO
consolidation (at the cost of privacy by co-mingling inputs), or simply
to sweep all funds out of a wallet for various reasons.

In an attempt to ensure this method is loosely coupled and testable, for
all behavior structs, we create brand new interface to accept. This
ensures that we only rely on the minimal number of methods needed to
perform our duty.
2019-01-09 15:55:23 -08:00
Olaoluwa Osuntokun
4ad175c16d
sweep: update getInputWitnessSizeUpperBound to be aware of nested p2sh
In this commit, we update the `getInputWitnessSizeUpperBound` and all
its callers to be aware of nested p2sh witness inputs. We do so by
adding another bool which is true if the output is a nested p2sh output.
If so, then in order to properly estimate the total weight, the caller
needs to factor in the non-witness data of the additional sigScript data
push.
2019-01-09 15:55:22 -08:00
Olaoluwa Osuntokun
c18e166e03
lnwallet+sweep: extend the WitnessGenerator type to return an InputScript
In this commit, we extend the WitnessGenerator type to now return an
InputScript. This allows it to be more encompassing, as now callers can
expect a sigScript to be populated if the input being swept requires a
sigScript field.

Along the way, we've also renamed input.BuildWitness to
input.CraftInputScript.  We also take a step towards allowing the
sweeper to sweep transactions for n2pwkh outputs. We do so by modifying
the BuiltWitness method to instead return an InputScript. Additionally,
when populating inputs if a sigScript is present, it will now be
populated.
2019-01-09 15:55:19 -08:00
Olaoluwa Osuntokun
73c9c2ee15
sweep+cnct+nursery+rpc: extract DetermineFeePerKw to func, add FeePreference
In this commit, we extract the existing determineFeePerKw method on the
RPC server into a new file in the sweep package. Along the way, we
consolidate code by introducing a new FeePreference struct, which allows
the caller to express their fee preference either in blocks to
confirmation, or a direct fee rate. This move takes a small step to
father decoupling calls in the main RPC server.
2019-01-09 15:55:17 -08:00