Commit Graph

657 Commits

Author SHA1 Message Date
Conner Fromknecht
cddb71ee53
routing/pathfind: evaluate TLV support sooner
We move up the check for TLV support, since we will later use it to
determine if we can use dependent features, e.g. TLV records and payment
addresses.
2019-12-18 23:56:05 -08:00
Conner Fromknecht
e3a9603846
routing/pathfind: simplify cltv calculation 2019-12-18 23:55:47 -08:00
Conner Fromknecht
b97adf79a4
routing/pathfind: consolidate final vs non-final hop processing 2019-12-18 23:55:27 -08:00
Conner Fromknecht
495ae8ca42
routing: consolidate final hop params for newRoute
This commit creates a wrapper struct, grouping all parameters that
influence the final hop during route construction. This is a preliminary
step for passing in the receiver's invoice feature bits, which will be
used to select an appropriate payment or payload type.
2019-12-18 23:55:08 -08:00
Conner Fromknecht
71e05e05bf
routing/pathfind: set final hop features used in pathfinding
In this commit, we overwrite the final hop's features with either the
destination features or those loaded from the graph fallback. This
ensures that the same features used in pathfinding will be provided to
route construction.

In an earlier commit, we validated the final hop's transitive feature
dependencies, so we also add validation to non-final nodes.
2019-12-18 23:54:49 -08:00
Conner Fromknecht
990d55d08c
routing/pathfind: ensure final hop supports payment addrs
This commit adds an optional PaymentAddr field to the RestrictParams, so
that we can verify the final hop can support it before doing an
expensive round of pathfindig.
2019-12-18 23:54:31 -08:00
Conner Fromknecht
acb7b83ead
routing/pathfind: validate final hop feature dependencies 2019-12-18 23:54:11 -08:00
Conner Fromknecht
cfa3fe2921
routing/pathfind: fix TLV fallback for unadvertised hops
In this commit, we fix a bug that prevents us from sending custom
records to nodes that aren't in the graph. Previously we would simply
fail if we were unable to retrieve the node's features.

To remedy, we add the option of supplying the destination's feature bits
into path finding. If present, we will use them directly without
consulting the graph, resolving the original issue. Instead, we will
only consult the graph as a fallback, which will still fail if the node
doesn't exist since the TLV features won't be populated in the empty
feature vector.

Furthermore, this also permits us to provide "virtual features" into the
pathfinding logic, where we make assumptions about what the receiver
supports even if the feature vector isn't actually taken from an
invoice. This can useful in cases like keysend, where we don't have an
invoice, but we can still attempt the payment if we assume the receiver
supports TLV.
2019-12-18 23:53:51 -08:00
Conner Fromknecht
bd66c0d34e
routing/pathfind_test: allow custom node features
This commit allows custom node features to be populated in specific test
instances. For consistency, we auto-populate an empty feature vector for
nodes that have nil feature vectors before writing them to the database.
2019-12-18 23:53:32 -08:00
Conner Fromknecht
618810394c
routing/pathfind_test: add asymmetric chan consructor
Later this will be used to populate distinct feature vectors for either
end of the channel.
2019-12-18 23:53:18 -08:00
Joost Jager
d85f378aa2
routing: move zero hops check 2019-12-16 14:53:47 +01:00
Joost Jager
31b2c22cf5
routing: check for invalid routes 2019-12-16 14:53:45 +01:00
Joost Jager
b8abae6a7e
routing: rename route variable to prevent clash with package 2019-12-14 08:47:53 +01:00
Joost Jager
75aa4e7061
routing: require tlv capability for custom record payments
Previously if a payment was sent with custom records attached, path
finding wouldn't perform a check whether the final node was capable of
receiving custom records in a tlv payload.
2019-12-12 00:15:02 +01:00
Joost Jager
c37289cd94
routing: pass custom records into pathfinding 2019-12-12 00:15:00 +01:00
Joost Jager
d02de70d20
multi: do not use tlv.Record outside wire format handling
This commit prepares for more manipulation of custom records. A list of
tlv.Record types is more difficult to use than the more basic
map[uint64][]byte.

Furthermore fields and variables are renamed to make them more
consistent.
2019-12-12 00:14:58 +01:00
Joost Jager
b6eb3a69ba
routing+lnrpc+lncli: allow setting min htlc policy 2019-12-11 00:17:08 +01:00
Joost Jager
74c2df658e
localchans: log policy update error 2019-12-11 00:17:06 +01:00
Joost Jager
f289dbd826
routing: define subsystem constant 2019-12-11 00:17:04 +01:00
Joost Jager
ddb98fcc41
multi: distinguish between htlc in and out constraints 2019-12-11 00:16:57 +01:00
Joost Jager
883f9e5f9a
Merge pull request #3749 from joostjager/extended-routing-failures
routing: local balance check before path finding
2019-12-04 12:17:17 +01:00
Joost Jager
9ae014edf6
routing: use self instead of source node for creating unified policy
A unified policy differs between local channels and other channels on
the network. There is more information available for local channels and
this is used in the unified policy.

Previously we used the pathfinding source pubkey to determine whether to
apply the local channel logic or not. If queryroutes is executed with a
source node that isn't the self node, this wouldn't work.
2019-12-04 09:45:09 +01:00
Joost Jager
97344af8f3
routing: local balance check 2019-12-04 09:45:07 +01:00
Joost Jager
3aaf32dc2e
routing: improve equal cost route comparison
When the (virtual) payment attempt cost is set to zero, probabilities
are no longer a factor in determining the best route. In case of routes
with equal costs, we'd just go with the first one found. This commit
refines this behavior by picking the route with the highest probability.
So even though probability doesn't affect the route cost, it is still
used as a tie breaker.
2019-12-02 14:23:57 +01:00
Joost Jager
c15b0316a2
routing: use FailureReasonError for internal path finding errors 2019-11-27 15:21:12 +01:00
Joost Jager
b5f1bde604
routing: add error var for pre-built route tried 2019-11-27 15:21:10 +01:00
Joost Jager
ac2df9bbf4
routing: use simple errors for path finding 2019-11-27 15:21:08 +01:00
Joost Jager
6774b5a007
routing: remove unused error codes 2019-11-27 15:21:06 +01:00
Joost Jager
7e4f9dd70a
routing/test: simplify context instantiation 2019-11-26 21:40:30 +01:00
Joost Jager
f8e9efbf99
routing: allow route to self 2019-11-26 10:15:44 +01:00
Joost Jager
81b7798c03
routing: pop heap at the end of the loop
This prepares for routing to self.
2019-11-26 10:15:42 +01:00
Joost Jager
683282fa24
routing: check loop conditions at end
This prepares for routing to self. When checking the condition at the
start, the loop would terminate immediately because the source is equal
to the target.
2019-11-26 10:15:40 +01:00
Joost Jager
2b332893b7
routing/test: add test focusing on not having a cycle 2019-11-26 10:15:38 +01:00
Joost Jager
cdf1aa5bc1
routing: track amt ranges in mc 2019-11-22 11:17:28 +01:00
Joost Jager
62f8cca75b
routing+routerrpc: also expose amt for success results in mc 2019-11-22 11:17:26 +01:00
Olaoluwa Osuntokun
6f9fcfaccc
Merge pull request #3499 from cfromknecht/mpp-payments-rpc
channeldb+rpcserver: expose legacy payments as multi-path payments
2019-11-21 18:38:53 -08:00
Johan T. Halseth
8755a35860
Merge pull request #3667 from cfromknecht/log-fixes
fundingmanager+routing log touch ups
2019-11-20 15:57:05 +01:00
Conner Fromknecht
063f24f2ed
channeldb+routing: expose HTLCs in payment subscriptions
This commit modifies the FetchPayment method to return MPPayment structs
converted from the legacy on-disk format. This allows us to attach the
HTLCs to the events given to clients subscribing to the outcome of an
HTLC.

This commit also bubbles up to the routerrpc/router_server, by
populating HTLCAttempts in the response and extracting the legacy route
field from the HTLCAttempts.
2019-11-19 20:43:38 -08:00
Conner Fromknecht
01cecb1f27
multi: rename to FailureReasonPaymentDetails
Prior name is too long XD
2019-11-19 20:42:21 -08:00
Conner Fromknecht
9e019407fb
routing/control_tower: fix PaymentResult godocs 2019-11-19 20:40:44 -08:00
Conner Fromknecht
fbd599a2cb
multi: rename Payment.PaymentPreimage to Payment.Preimage
Preliminary step to exposing PaymentPreimage() as a method that can be
shared between legacy payments and mutli-path payments.
2019-11-19 20:40:29 -08:00
Joost Jager
a00a360018
Merge pull request #3739 from joostjager/incoming-restriction
routing: last hop restriction
2019-11-19 08:38:33 +01:00
Joost Jager
f28941c7e4
routing+routerrpc+lncli: enable last hop restriction for payments 2019-11-18 21:03:03 +01:00
Joost Jager
814dbea745
routing: add last hop restriction 2019-11-18 21:03:01 +01:00
Wilmer Paulino
29f12411cd
Merge pull request #3732 from Crypt-iQ/router_race_1115
routing: fix race condition when resuming payments
2019-11-18 11:06:18 -08:00
Joost Jager
0f6af2ed54
routing/test: fix outgoing restriction test
Previously both paths were equal cost, so it could also be a
coincedence that the path with the outgoing restriction would be chosen.
2019-11-18 12:09:43 +01:00
Joost Jager
5fde7977f4
routing/test: create path finding test context 2019-11-18 10:55:43 +01:00
nsa
929167b9af
routing: fix race condition when resuming payments 2019-11-15 14:44:05 -05:00
Joost Jager
a364d2cd82
routing: log route when payment attempt fails 2019-11-12 14:13:31 +01:00
Joost Jager
85dcaff0d9
routing/route: report amount per hop in Route.String()
Makes log output slightly more descriptive to aid debugging of routing
problems.
2019-11-12 14:13:27 +01:00
Joost Jager
b222b6e625
Merge pull request #3685 from cfromknecht/flat-features
flat features
2019-11-09 11:43:45 +01:00
Conner Fromknecht
5e27b5022c
multi: remove LocalFeatures and GlobalFeatures 2019-11-08 05:32:00 -08:00
Joost Jager
dc0399af51
routing: use distinct probability estimation for local channels
Previously we used the a priori probability also for our own untried
channels. This led to local channels that had seen a success already
being prioritized over untried local channels. In some cases, depending
on the configured payment attempt cost, this could lead to the payment
taking a two hop route while a direct payment was also possible.
2019-11-07 11:26:52 +01:00
Joost Jager
5a80c3459f
routing: create prob estimation func taking external node prob 2019-11-07 11:25:14 +01:00
Olaoluwa Osuntokun
863d795c94
Merge pull request #3616 from Crypt-iQ/router_race_1019
ticker: add tickerMtx to prevent data race
2019-11-05 19:47:18 -08:00
Conner Fromknecht
0035e8b99d
routing/router: fix double hex encoding of target pubkey 2019-11-05 15:04:24 -08:00
Conner Fromknecht
6d971e5113
routing/route/route: add optional MPP field to Hop
This commit also modifies the Router serialization to persist the MPP
struct when present, and properly restore it when loading from disk.
2019-11-04 14:11:28 -08:00
nsa
b392dd1b95
routing: move statTicker to prevent race condition 2019-11-02 13:55:41 -04:00
Olaoluwa Osuntokun
acd8a6e302
Merge pull request #3470 from cfromknecht/invalid-onion-payload
htlcswitch+lnwire: invalid onion payload
2019-11-01 18:58:00 -07:00
Joost Jager
fcf81ed8ff
Merge pull request #3556 from joostjager/query-mc-prob
routerrpc: add queryprob rpc
2019-10-31 08:03:29 +01:00
Conner Fromknecht
d08e8ddd61
routing/result_interpretation: process InvalidOnionPayload
An InvalidOnionPayload implies that the onion was successfully received
by the reporting node, but that they were unable to extract the
contents. Since we assume our own behavior is correct, this mostly
likely poins to an error in the reporter's implementation or that we
sent an unknown required type. Therefore we only penalize that single
hop, and consider the failure terminal if the receiver reported it.
2019-10-30 21:20:08 -07:00
Conner Fromknecht
2f8021d8db
routing/result_interpretation: fix off-by-one for incoming failure
Previously we would not mark a success for the first hop if the fail
source index was 2. We also add a test to assert this behavior.
2019-10-30 21:18:52 -07:00
Joost Jager
a8f077a841
Merge pull request #3558 from joostjager/non-strict-pathfinding
routing: non-strict path finding
2019-10-30 08:42:28 +01:00
Lars Lehtonen
6254c53a4a
routing: fix use of T.Fatal() in test goroutine 2019-10-29 13:21:53 -07:00
Joost Jager
729c3a6bd6
routing: use unified policy for build route 2019-10-29 19:17:58 +01:00
Joost Jager
fb57255b5c
routerrpc: add mc probability query rpc
Probabilities are no longer returned for querymc calls. To still provide
some insight into the mission control internals, this commit adds a new
rpc that calculates a success probability estimate for a specific node
pair and amount.
2019-10-29 12:32:19 +01:00
Joost Jager
3d8adaef95
routing: embed TimedPairResult in snapshot data 2019-10-29 12:32:15 +01:00
Joost Jager
57911faa98
routing: export TimedPairResult
Prepares for this data structure being accessed in mission control rpc
implementations.
2019-10-29 12:32:13 +01:00
Joost Jager
912a8201f9
routing: remove embedded struct from timedPairResult
This prepares for decoupling the result interpretation of a single
payment attempt from the information stored in mission control memory
on the history of a node pair. A planned follow-up where we store both
the last success and last failure requires this decoupling.
2019-10-29 12:32:11 +01:00
Joost Jager
a347237e7a
routing: use unified policy for path finding
In this commit we change path finding to no longer consider all channels
between a pair of nodes individually. We assume that nodes forward
non-strict and when we attempt a connection between two nodes, we don't
want to try multiple channels because their policies may not be identical.
Having distinct policies for channel to the same peer is against the
recommendation in the spec, but it happens in the wild. Especially since
we recently changed the default cltv delta value.

What this commit introduces is a unified policy. This can be looked upon
as the greatest common denominator of all policies and should maximize
the probability of getting the payment forwarded.
2019-10-25 11:22:28 +02:00
Joost Jager
6b391d04d0
routing/test: mark function as test helper 2019-10-25 11:22:26 +02:00
Juan Pablo Civile
818c302d46 routing: use nodeWithDist instead of vertex to avoid map access
The same nodeWithDist was fetched from the map for every channel it has.
This struct is not mutated so it can be fetched before and reused.
2019-10-24 21:38:07 -03:00
Juan Pablo Civile
df70095ad0 routing: optimize path finding structures
distance map now holds the edge the current path is coming from,
removing the need for next map.

Both distance map and distanceHeap now hold pointers instead of the full
struct to reduce allocations and copies.

Both these changes reduced path finding time by ~5% and memory usage by
~2mb.
2019-10-24 21:38:07 -03:00
Juan Pablo Civile
fc36df0e60 routing: avoid unneeded map access
`processEdge` basically had 4 expensive operations: 3 map accesses and
updating the heap. This removes one of those for a small performance
gain.
2019-10-24 21:31:30 -03:00
Juan Pablo Civile
3e60a23632 routing: pre-allocate the distance map to an estimated node count
Pre-sizing these structures avoids a lot of map resizing, which causes
copies and rehashing of entries. We mostly know that the map won't
exceed that size, and it doesn't affect memory usage in any significant
way.
2019-10-24 21:31:30 -03:00
Juan Pablo Civile
2141713936 routing: avoid walking all nodes for path finding if we don't need to
Calling `ForEachNode` hits the DB, and allocates and parses every node
in the graph. Walking the channels also loads nodes from the DB, so this
meant that each node was read/parsed/allocated several times per run.

This reduces runtime by ~10ms and memory usage by ~4mb.
2019-10-24 21:31:30 -03:00
Juan Pablo Civile
5389161162 routing: make log in findPath hot path use logClosure
It generates heap allocations for it's params even if it won't end up
using them.

Reduces memory usage by 2mb
2019-10-24 21:31:30 -03:00
Joost Jager
1fac41deed
routing+routerrpc: improve prob. estimation for untried connections
This commit changes mission control to partially base the estimated
probability for untried connections on historical results obtained in
previous payment attempts. This incentivizes routing nodes to keep all
of their channels in good shape.
2019-10-22 15:52:38 +02:00
Joost Jager
fab13900e2
routing+routerrpc: remove probability estimates from mc state snapshot
Probability estimates are amount dependent. Previously we assumed an
amount, but that starts to make less sense when we make probability more
dependent on amounts in the future.
2019-10-22 15:52:36 +02:00
Joost Jager
559d3c0910
routing: also fail pairs for node-level failures
This commit modifies the interpretation of node-level failures.
Previously only the failing node was marked. With this commit, also the
incoming and outgoing connections involved in the route are marked as
failed.

The change prepares for the removal of node-level failures in mission
control probability estimation.
2019-10-22 15:52:34 +02:00
Joost Jager
843c87a203
routing: create mc getWeight method 2019-10-22 15:52:32 +02:00
Joost Jager
a3f7dbc633
routing: change representation of pair results in mc
This commit changes the in-memory structure of the mission control
state. It prepares for calculation of a node probability. For this we
need to be able to efficiently look up the last results for all channels
of a node.
2019-10-22 15:52:30 +02:00
Joost Jager
aefbee78d6
routing: use pairResult constructors
To make it explicit whether a failure or a success result is
instantiated.
2019-10-22 15:52:28 +02:00
Joost Jager
37ef46bc48
routing/test: extract mission control test parameters 2019-10-22 15:52:26 +02:00
Johan T. Halseth
610a93e2ff
routing/chainview: check GetCFilter error
Since the filter will never be nil in non-error cases now, remove the
nil-check.
2019-10-15 10:31:25 +02:00
Wilmer Paulino
0fc401de19
routing+routerrpc: take max cltv limit into account within path finding
With the introduction of the max CLTV limit parameter, nodes are able to
reject HTLCs that exceed it. This should also be applied to path
finding, otherwise HTLCs crafted by the same node that exceed it never
left the switch. This wasn't a big deal since the previous max CLTV
limit was ~5000 blocks. Once it was lowered to 1008, the issue became
more apparent. Therefore, all of our path finding attempts now have a
restriction of said limit in in order to properly carry out HTLCs to the
network.
2019-10-11 18:04:49 -04:00
Olaoluwa Osuntokun
5ef1f85998
Merge pull request #3578 from wpaulino/no-freelist-sync-option
config: add sync freelist cli flag
2019-10-04 15:16:30 -07:00
Olaoluwa Osuntokun
c03fb8aca0
Merge pull request #3561 from Roasbeef/chan-validation-cleanup
chanvalidate: create new channel validation package
2019-10-04 12:32:07 -07:00
Wilmer Paulino
194a9dea81
multi: support sync freelist option within btcwallet 2019-10-04 12:19:40 -04:00
Olaoluwa Osuntokun
6ebada112f
routing: update 3d party channel verification to use new chanvalidate package
In the process of moving to use the new package, we no longer need to
fetch the outpoint directly, and instead only need to pass the funding
transaction into the new verification logic.
2019-10-03 16:23:17 -07:00
Wilmer Paulino
5ed1084130
Merge pull request #3572 from joostjager/canceled-spelling
multi: fix canceled spelling
2019-10-03 16:50:06 -04:00
Joost Jager
b58dbb2d70
multi: fix canceled spelling 2019-10-03 17:27:36 +02:00
Joost Jager
9f3656efeb
routing: log performance metrics 2019-10-03 15:07:11 +02:00
Olaoluwa Osuntokun
18f88cbd8d
Merge pull request #3440 from joostjager/buildroute
routing: add build route functionality
2019-09-24 20:24:24 -07:00
Joost Jager
299821152a
routing+routerrpc: add BuildRoute function 2019-09-24 10:00:44 +02:00
Valentine Wallace
9a52cb6dab
multi: update internals to support updating max htlc
In this commit, we update the router and link to support users
updating the max HTLC policy for their channels. By updating these internal
systems before updating the RPC server and lncli, we protect users from
being shown an option that doesn't actually work.
2019-09-23 13:07:10 +02:00
Joost Jager
c80feeb4b3
routing+discovery: extract local channel manager
The policy update logic that resided part in the gossiper and
part in the rpc server is extracted into its own object.

This prepares for additional validation logic to be added for policy
updates that would otherwise make the gossiper heavier.

It is also a small first step towards separation of our own channel data
from the rest of the graph.
2019-09-23 13:07:08 +02:00
Joost Jager
fd63ed13ff
routing/route: add vertex constructor for hex string 2019-09-17 11:11:00 +02:00
Joost Jager
8c44cf4a22
channeldb: add ComputeFee function 2019-09-17 11:10:58 +02:00
Joost Jager
f60e4b1e14
lnwire+htlcswitch: report height for invalid payment details failure
Extends the invalid payment details failure with the new accept height
field. This allows sender to distinguish between a genuine invalid
details situation and a delay caused by intermediate nodes.
2019-09-16 10:10:20 +02:00