Commit Graph

252 Commits

Author SHA1 Message Date
Johan T. Halseth
6ba6982ae7
discovery/sync_manager_test: add TestSyncManagerHistoricalSyncOnReconnect
TestSyncManagerHistoricalSyncOnReconnect tests that the sync manager will
re-trigger a historical sync when a new peer connects after a historical
sync has completed, but we have lost all peers.
2019-05-24 11:05:30 +02:00
Johan T. Halseth
526486ae24
discovery/sync_manager: restart historical sync on first connected peer
To handle the case where we have been without peers, and get a new
connection, we reset the historical scan booleans when the first active
syncer is connected to trigger another historical sync.
2019-05-24 11:05:29 +02:00
Johan T. Halseth
c4415f0400
Merge pull request #3044 from cfromknecht/spelling-fixes
multi: fix spelling mistakes
2019-05-07 08:50:36 +02:00
Conner Fromknecht
17b2140cb5
multi: fix spelling mistakes 2019-05-04 15:35:37 -07:00
Olaoluwa Osuntokun
985902be27
Merge pull request #2916 from cfromknecht/split-syncer-query-reply
discovery: make gossip replies synchronous
2019-04-29 17:40:13 -07:00
Johan T. Halseth
ee257fd0eb
multi: move Route to sub-pkg routing/route 2019-04-29 14:52:33 +02:00
Conner Fromknecht
5251ebe117
discovery/syncer_test: fix benign off-by-one in DelayDOS test
Prior to this change, the numQueryResponses that we calculated would be
one more than what we actually wanted since it didn't account for the
initial QueryChannelRange msg. This resulted in the test sending one
extra delayed query than was configured. This doesn't fundamentally
impact the test, but does make what happens in the test more reflective
of the configuration.
2019-04-26 20:05:23 -07:00
Conner Fromknecht
bf4543e2bd
discovery/syncer: make gossip sends synchronous
This commit makes all replies in the gossip syncer synchronous, meaning
that they will wait for each message to be successfully written to the
remote peer before attempting to send the next. This helps throttle
messages the remote peer has requested, preventing unintended
disconnects when the remote peer is slow to process messages. This
changes also helps out congestion in the peer by forcing the syncer to
buffer the messages instead of dumping them into the peer's queue.
2019-04-26 20:05:10 -07:00
Conner Fromknecht
23d10336c2
discovery/syncer: separate query + reply handlers
This commit creates a distinct replyHandler, completely isolating the
requesting state machine from the processing of queries from the remote
peer. Before the two were interlaced, and the syncer could only reply to
messages in certain states. Now the two will be complete separated,
which is preliminary step to make the replies synchronous (as otherwise
we would be blocking our own requesting state machine).

With this changes, the channelGraphSyncer of each peer will drive the
replyHanlder of the other. The two can now operate independently, or
even spun up conditionally depending on advertised support for gossip
queries, as shown below:

          A                                 B
 channelGraphSyncer ---control-msg--->
                                        replyHandler
 channelGraphSyncer <--control-msg----
           gossiper <--gossip-msgs----

                    <--control-msg---- channelGraphSyncer
       replyHandler
                    ---control-msg---> channelGraphSyncer
                    ---gossip-msgs---> gossiper
2019-04-26 20:03:14 -07:00
Wilmer Paulino
d68842ee9e
discovery: queue active syncers until initial historical sync signal
In this commit, we begin to queue any active syncers until the initial
historical sync has completed. We do this to ensure we can properly
handle any new channel updates at tip. This is required for fresh nodes
that are syncing the channel graph for the first time. If we begin
accepting updates at tip while the initial historical sync is still
ongoing, then we risk not processing certain updates since we've yet to
learn of the channels themselves.
2019-04-24 13:20:57 -07:00
Wilmer Paulino
07136a5bc2
discovery: handle initial historical sync disconnection
In this commit, we add logic to handle a peer with whom we're performing
an initial historical sync disconnecting. This is required to ensure we
get as much of the graph as possible when starting a fresh node. It will
also serve useful to ensure we do not get stalled once we prevent active
GossipSyncers from starting until the initial historical sync has
completed.
2019-04-24 13:20:55 -07:00
Wilmer Paulino
227e492ccf
discovery: make historicalSync transition synchronous
We do this to ensure that the state transition from chansSynced to
syncingChans has occurred by the time we return back to the caller.
2019-04-24 13:20:18 -07:00
Wilmer Paulino
72e9674cff
discovery: simplify chooseRandomSyncer helper 2019-04-24 13:20:16 -07:00
Wilmer Paulino
29baa12254
discovery: synchronize new/stale GossipSyncers with syncerHandler
Now that the roundRobinHandler is no longer present, this commit aims to
clean up and simplify some of the logic surrounding initializing/tearing
down new/stale GossipSyncers from the SyncManager. Along the way, we
also synchronize these calls with the syncerHandler, which will serve
useful in future work that allows us to recovery from initial historical
sync disconnections.
2019-04-24 13:19:09 -07:00
Wilmer Paulino
5db2cf6273
discovery+server: remove roundRobinHandler and related code
Since ActiveSync GossipSyncers no longer synchronize our state with the
remote peers, none of the logic surrounding the round-robin is required
within the SyncManager.
2019-04-24 13:19:07 -07:00
Wilmer Paulino
9a6e8ecb9e
discovery: remove channel synchronization from ActiveSync GossipSyncers
In this commit, we remove the ability for ActiveSync GossipSyncers to
synchronize our graph with our remote peers. This serves as a starting
point towards allowing the daemon to only synchronize our graph through
historical syncs, which will be routinely done by the SyncManager.
2019-04-24 13:19:06 -07:00
Wilmer Paulino
aed0c2a90e
discovery: support optional message fields when processing announcements
In this commit, we extend the gossiper with support for external callers
to provide optional fields that can serve as useful when processing a
specific network announcement. This will serve useful for light clients,
which are unable to obtain the channel point and capacity for a given
channel, but can provide them manually for their own set of channels.
2019-04-18 21:57:39 -07:00
Wilmer Paulino
90475d5339
discovery: check nil policy within isMsgStale
If both policies don't exist, then this would result in a panic. Since
they don't exist, we can assume the policy we're currently evaluating is
fresh.
2019-04-15 12:49:34 -07:00
Wilmer Paulino
4bb4b0fe4e discovery: increase DefaultHistoricalSyncInterval to one hour
Assuming a graph size of 50,000 channels, an interval of 20 minutes
would cause nodes to consume about 600MB per month in bandwidth doing
these routine historical sync spot checks. In this commit, we increase
to one hour, which consumes about 300MB per month.
2019-04-11 15:46:22 -07:00
Olaoluwa Osuntokun
53beed7aaf
discovery: send policy updates for private channels directly to the remote peer
In this commit, we modify the main loop in `processChanPolicyUpdate` to
send updates for private channels directly to the remote peer via the
reliable message sender. This fixes a prior issue where the remote peer
wouldn't receive new updates as this method doesn't go through the
traditional path for channel updates.
2019-04-10 17:05:51 -07:00
Olaoluwa Osuntokun
a9d6273828
discovery: add new TestPropagateChanPolicyUpdate test case
In this commit, we add a new test case to exercise a recent bug fix to
ensure that we no longer broadcast private channel policy changes. Along
the way, a few helper functions were added to slim down the test to the
core logic compared to some of the existing tests in this package. In
the future, these new helper functions should be utilized more widely for
tests in this package in order to cut down on some of the duplicated
logic.
2019-04-10 17:05:49 -07:00
Olaoluwa Osuntokun
a6ae397f8c
discovery: ensure we don't broadcast policy changes for private channels 2019-04-10 17:05:48 -07:00
Olaoluwa Osuntokun
921eea9f57
discovery: update mockGraphSource to implement ForAllOutgoingChannels 2019-04-10 17:05:47 -07:00
Olaoluwa Osuntokun
aba32de1f4
discovery: set AnnSigner for mock signer in testCtx 2019-04-10 17:05:44 -07:00
Olaoluwa Osuntokun
13b91e6ea1 discovery: properly set short chan IDs for ann sigs in tests 2019-04-10 17:05:37 -07:00
Olaoluwa Osuntokun
3e5a6f1022
Merge pull request #2905 from cfromknecht/split-chunk-size
discovery: make batch size distinct from chunk size, reduce to 500
2019-04-09 19:27:20 -07:00
Conner Fromknecht
a4b4fe666a
discovery: make batch size distinct from chunk size, reduce to 500
This commit reduces the number of channels a syncer will request from
the remote node in a single QueryShortChanIDs message. The current size
is derived from the chunkSize, which is meant to signal the maximum
number of short chan ids that can fit in a single ReplyChannelRange
message. For EncodingSortedPlain, this number is 8000, and we use the
same number to dictate the size of the batch from the remote peer.

We modify this by introducing a separately configurable batchSize, so
that both can be tuned independently. The value is chosen to reduce the
amount of buffering the remote party will perform, only requiring them
queue 500 responses, as opposed to 8000. In turn, this reduces larges
spikes in allocation on the remote node at the expense of a few extra
round trips for the control messages. However, will be negligible since
the control messages are much smaller than the messages being returned.
2019-04-06 15:27:26 -07:00
Conner Fromknecht
9df6af237e
discovery/sync_manager: restore lazy gossip sends 2019-04-06 03:32:03 -07:00
Wilmer Paulino
00338c5ec2
discovery: properly handle SyncManager shutdown signal 2019-04-03 19:32:56 -07:00
Wilmer Paulino
46ceaf8cf6
discovery: only replace stale active syncer if disconnected
In this commit, we address a bug where we'd attempt to replace the
stale active syncer when it transitioned to a passive syncer. This
replacement logic is only intended to happen when the active syncer
disconnects, as rotateActiveSyncerCandidate chooses and queues its own
replacement.
2019-04-03 16:43:31 -07:00
Wilmer Paulino
8b6a9bb5d3
discovery: make timestamp range check inclusive within FilterGossipMsgs
As required by the spec:

> SHOULD send all gossip messages whose timestamp is greater or equal to
first_timestamp, and less than first_timestamp plus timestamp_range.
2019-04-03 15:44:46 -07:00
Wilmer Paulino
70be812747
discovery+server: use new gossiper's SyncManager subsystem 2019-04-03 15:44:43 -07:00
Wilmer Paulino
a188657b2f
discovery: introduce gossiper SyncManager subsystem
In this commit, we introduce a new subsystem for the gossiper: the
SyncManager. This subsystem is a major overhaul on the way the daemon
performs the graph query sync state machine with peers.

Along with this subsystem, we also introduce the concept of an active
syncer. An active syncer is simply a GossipSyncer currently operating
under an ActiveSync sync type. Before this commit, all GossipSyncer's
would act as active syncers, which means that we were receiving new
graph updates from all of them. This isn't necessary, as it greatly
increases bandwidth usage as the network grows. The SyncManager changes
this by requiring a specific number of active syncers. Once we reach
this specified number, any future peers will have a GossipSyncer with a
PassiveSync sync type.

It is responsible for three main things:

1. Choosing different peers randomly to receive graph updates from to
ensure we don't only receive them from the same set of peers.

2. Choosing different peers to force a historical sync with to ensure we
have as much of the public network as possible. The first syncer
registered with the manager will also attempt a historical sync.

3. Managing an in-order queue of active syncers where the next cannot be
started until the current one has completed its state machine to ensure
they don't overlap and request the same set of channels, which
significantly reduces bandwidth usage and addresses a number of issues.
2019-04-03 15:08:32 -07:00
Wilmer Paulino
e075817e44
discovery: introduce GossipSyncer signal delivery of chansSynced state
In this commit, we introduce another feature to the GossipSyncer in
which it can deliver a signal to an external caller once it reaches its
terminal chansSynced state. This is yet to be used, but will serve
useful with a round-robin sync mechanism, where we wait for to finish
syncing with a specific peer before moving on to the next.
2019-04-03 15:08:31 -07:00
Wilmer Paulino
042241dc48
discovery: allow gossip syncer to perform historical syncs
In this commit, we introduce the ability for gossip syncers to perform
historical syncs. This allows us to reconcile any channels we're missing
that the remote peer has starting from the genesis block of the chain.
This commit serves as a prerequisite to the SyncManager, introduced in a
later commit, where we'll be able to make spot checks by performing
historical syncs with peers to ensure we have as much of the graph as
possible.
2019-04-03 15:08:30 -07:00
Wilmer Paulino
ca4fbd598c
discovery: introduce GossipSyncer sync transitions
In this commit, we introduce the ability for GossipSyncer's to
transition their sync type. This allows us to be more flexible with our
gossip syncers, as we can now prevent them from receiving new graph
updates at any time. It's now possible to transition between the
different sync types, as long as the GossipSyncer has reached its
terminal chansSynced sync state. Certain transitions require some
additional wire messages to be sent, like in the case of an ActiveSync
GossipSyncer transitioning to a PassiveSync type.
2019-04-03 15:08:29 -07:00
Wilmer Paulino
acc42c1b68
discovery: set GossipSyncer update horizon to current time
With the introduction of the gossip sync manager in a later commit,
retrieving the backlog of updates within the last hour is no longer
necessary as we'll be forcing full syncs periodically.
2019-04-03 15:08:28 -07:00
Wilmer Paulino
8d7c0a9899
discovery: replace GossipSyncer syncChanUpdates flag with SyncerType
In this commit, we introduce a new type: SyncerType. This type denotes
the type of sync a GossipSyncer is currently under. We only introduce
the two possible entry states, ActiveSync and PassiveSync. An ActiveSync
GossipSyncer will exchange channels with the remote peer and receive new
graph updates from them, while a PassiveSync GossipSyncer will not and
will only response to the remote peer's queries.

This commit does not modify the behavior and is only meant to be a
refactor.
2019-04-03 15:08:27 -07:00
Wilmer Paulino
7e92b9a4e2
discovery: export gossipSyncer 2019-04-03 15:08:26 -07:00
Wilmer Paulino
d954cfc4ba
discovery: include peerPub in gossipSyncerCfg 2019-04-03 15:08:25 -07:00
Wilmer Paulino
c72db902f0
discovery: replace waitPredicate with lntest version 2019-04-03 15:08:12 -07:00
Wilmer Paulino
0ab97957ea discovery: check if stale within isMsgStale for ChannelUpdate messages
In this commit, we address an assumption of the gossiper's recently
introduce reliable sender. The reliable sender is currently only used
for messages of unannounced channels. This makes sense as peers should
be able to retrieve messages from the network if they've previously
announced. However, within isMsgStale, we assumed that the reliable
sender would be used for every ChannelUpdate being sent, even if the
channel is already announced. Due to this, checking if the policy is
stale was unnecessary. But since this isn't the case, we should actually
be checking whether it is stale to prevent sending it later on.
2019-03-28 17:22:23 -07:00
Wilmer Paulino
93414bd27a discovery: clean up TestSignatureAnnouncementRetryAtStartup
In this commit, we remove code from
TestSignatureAnnouncementRetryAtStartup that is not crucial to the
assumptions the test is exercising.
2019-03-28 17:22:23 -07:00
Wilmer Paulino
95ed11b01b discovery: properly store and retrieve edge policies within mockGraphSource
In this commit, we address an issue with our router mock in which it was
not properly storing and retrieving edge policies. Previously, they were
being appended to a slice of policies, but this doesn't always work like
when you attempt to update the same edge twice. Instead, the slice can
only contain up to two entries, each one being the latest version of
each direction.
2019-03-28 17:22:22 -07:00
Wilmer Paulino
3a2c4ec594 discovery: add missing offline peer check before sending message reliably 2019-03-28 17:21:28 -07:00
Wilmer Paulino
3e81e89062 discovery: add log when attempting to send msg reliably and peer is offline 2019-03-28 17:21:28 -07:00
Wilmer Paulino
5cec4513de
discovery: reject announcements for known zombie edges
In this commit, we leverage the recently introduced zombie edge index to
quickly reject announcements for edges we've previously deemed as
zombies. Care has been taken to ensure we don't reject fresh updates for
edges we've considered zombies.
2019-03-27 13:08:03 -07:00
Wilmer Paulino
23796d3247
routing+discovery: extend ChannelGraphSource with zombie index methods 2019-03-27 13:07:30 -07:00
Conner Fromknecht
0ae06c8189
discovery+server: send lazy gossip msgs 2019-03-05 17:08:48 -08:00
Conner Fromknecht
f39edd8000
peer: add SendMessageLazy 2019-03-05 17:08:22 -08:00