This commit removes the mining of a block within the integration tests,
that would lead to a flake during runs. The reason was that the sweeoing
transaction was actually broadcast already at this point, and this block
was mined with the assumption that it wasn't. However, test would pass
more often than not because the UTXO nursery would be working on
graduating new heights, whcih is a bit slow, so in most cases the block
would be mined before it had broadcast the sweeping transaction.
By removing this block we ensure that the sweeping transaction will be
found for sure in the waitForTxInMempool call below.
This commit modifies the integration tests to work with the recent
changes to the ChannelArbitrator, where it will only act on commitments
that has been confirmed. Main changes involving when to look for
transactions in the mempool and in blocks, and using the new RPC for
getting channels in the "waiting close" phase when they are waiting for
the commitment to confirm.
In this commit, we fix an existing flake in the integration tests. If it
was the case that Alice didn't yet know of all the channels, then the
payment attempt below would fail at times, depending on other timing
factors in the test. We fix this flake by waiting for Alice to learn of
all channels before we proceed to the actual testing logic.
In this commit, we extend the closeChannelAndAssert testing utility
function to ensure that the channel is no longer marked as "pending
close" in the database. With this change, we hop to catch a recently
reported issue wherein users report that a co-op close channel has been
fully confirmed, yet it still pops up in the `pendingchannels` command.
In this commit, we update the testUpdateChannelPolicy to exercise the
recent set of changes within the switch. If one applies this test to a
fresh branch (without those new changes) it should fail. This is due to
the fact that before, Bob would attempt to apply the constraints of the
incoming link (which we updated) instead of the outgoing link. With the
recent set of changes, the test now properly passes.
In this commit, we extend the testRevokedCloseRetributionRemoteHodl so
that the final broadcast revoked transaction has incoming *and* outgoing
HTLC's. As is, this test fails as there's a lingering bug in the way we
generate htlc resolutions. A follow up commit will remedy this issue.
In this commit, we modify the sphinx replay test to actually force close
that final channel. We do this, as otherwise, we'll now reject the co-op
close attempt as the channel still has active HTLCs.
This commit is a follow up to the prior commit which fixed a rounding
error bug in lnwallet. For uniformity, we also fix other occurrences in
the breach arbiter, as well as the integration tests.
This commit removes two unnecessary disconnect/reconnect attempts
from the switch itest. Both occur after the primary test has been
completed, and were being executed before doing a final sanity check
that the path is still usable. Nothing about the test behavior should
change.
This commits removes many of the timeout-based consistency
checks, which tend to be less dependable on Travis. They
have been replaced with stronger WaitPredicates, and the new
WaitInvariant where appropriate. This should give provide a
much greater degree of reliability in our highly-variant
testing environments.
// 1. Carol --> Dave --> Alice --> Bob forward payment
// 2. Carol --- Dave X Alice --- Bob disconnect intermediaries
// 3. Carol --- Dave X Alice <-- Bob settle last hop
// 4. Carol --- Dave X X shutdown Bob, restart Alice
// 5. Carol <-- Dave <-- Alice X expect settle to propagate
Since a ChannelPoint's funding txid can now be get/set as raw bytes or
a string, we first need to check what type it's currently set to before
accessing it.
In this commit, we fix an existing flake on Travis related to the new
set of on-chain HTLC tests. In this timing flake, Bob would broadcast
his sweeping transaction, but *mid block mining*. As a result, the
output would never be properly swept, needing an additional block to be
mined. We’ll now wait for both Bob’s sweeping transaction, and Carol’s
sweep transaction to be confirmed before we attempt our assertions.
In this commit, we fix an existing bug in the implementation of the
resolution of the htlcOutgoingContestResolver. Before this commit, we
would _always_ watch the claim outpoint. However, if this is on the
remote party’s commitment transaction, then we would end up watching
the wrong output. We’ll now properly detect this by modifying which
output we watch, based on if we have a second level transaction or not.
In this commit, we add 6 new integration tests to test the various
actions that may need to be performed when either side goes on-chain to
fully resolve HTLC’s. Many of the tests are mirrors of each other as
they test sweeping/resolving HTLC’s from both commitment transactions.
In this commit, we modify the testChannelForceClosure integration test
to account for the fact that now the HTLCs are only sent to the nursery
once they’ve fully timed out. Additionally, we now send Carol HTLCs
that she doesn’t know the preimage to, so she doesn’t attempt to sweep
them before we can actually time them out.
This commit adds a new integration test, that checks that
policy/fee updates get propagated properly in the network,
such that the other nodes learn about the changes.
This commit extracts the launching of a goroutine subscribing
to and forwarding graph topology notifications into its own
utility method, such that it can be used in other tests as
well.
This commit adds a line of text including a test case's
name to Alice's and Bob's logfiles during integration
tests, making it easier to seek for the place in the log
where the specific tests start.
This commit adds a new test, that in a small network
of 4 nodes, tests that a private channel can be used
for routing payments by the endpoints of the channel,
while the existence of the channel is not known to
the rest of the network.
In this commit we rename the lnrpc.PendingChannelRequest and
lnrpc.PendingChannelResponse to
lnrpc.PendingChannelsRequest/lnrpc.PendingChannelsResponse. We do this
as we strive to ensure that the naming scheme across the RPC interface
is consistent.
This commit adds a small cancellation check to the
invoice subscription integration test. Calls to
Fatalf were observed on travis after the test had
ended stemming from the subscriber's goroutine,
which could happen if the subscription is late.
It also extends the timeout on the test from 5 to
10 seconds.
There is a sleep after channels are opened to ensure the channel is
removed from the set of pending reservations. We can avoid this sleep
and get better guarantees of the channel being opened by deleting the
reservation just before updating channel state to active instead of
after.
This helps catch issues in the RPC tests faster by putting a timeout
on all SendPayment requests. Otherwise, if a payment stalled, the test
would run until the test suite timeout, 10 minutes. Also simplifies
some code with a helper function and using SendPaymentSync where
possible.
If an lnd node encounters a fatal process errors, we now log the error
asynchronously, instead of calling Fatalf on the test instance. This
is because calling Fatalf in a separate goroutine does not actually
end the test immediately as expected, but rather just kills the
goroutine. This ensures that we see server errors on all nodes before
the test process exits.
In this commit, we increase the initial amount sent in the multi-hop
error integration test. We must do this now as the Bandwidth() function
now takes into account the total fee paid within the commitment
transaction. This caused an earlier send to fail instead of the once
following send.
To fix this, we simply send less in the initial test case.
This commit removes the testChannelReestablishment integration test as
it is currently incomplete. In order to properly test this, we require
some infrastructure that allows us to kill the connection at will once
a message is sent across the wire.
In this commit BOLT№2 retranmission logic for the channel link have
been added. Now if channel link have been initialised with the
'SyncState' field than it will send the lnwire.ChannelReestablish
message and will be waiting for receiving the same message from remote
side. Exchange of this message allow both sides understand which
updates they should exchange with each other in order sync their
states.
This commit adds a test for an lnd instance experiecing a reorg,
making sure a channel that is in the channel graph (using the
describegraph rpc call) will no longer be after the funding tx
gets reorged out.
In this commit, we modify the assertNumOpenChannelsPending to poll
every 200ms rather than just a single attempt. The goal of this commit
is to reduce the number of flakes on travis caused by slow instances.
In this commit, we extend the testMultiHopPayments test case to add an
additional node to the multi-hop payment route: Dave.
Related to #391 as it uses the provided code fragment to reproduce the
bug. With this test in place, we’ll now be able to notice any
regressions in this area.
In this commit we modify all the test that involve sending payments to
use the payreq returned rather than manually populating the
payhash+dest fields in the SendRequest proto argument to SendPayment.
This is required as if we don’t use the payreq returned, then the
receiving node will reject the payment as it’ll use the global final
CLTV delta value, rather than the value (within the pay req) that the
receiver is expecting.
In order to maintain the original essence of the test, we need to clear
the state of missionControl with each attempt, essentially advancing
time between each payment attempt.
This commit fixes a bug related to swallowing an error that should go
to the switch in the case of an insufficient balance error when
attempting to add a new HTLC to the channel state machine. In this
case, an error would never be returned back to the client/switch, and
the internal processing within the channelLink would loop forever,
attempting to add an HTLC that can’t be added due to insufficient
balance to state machine itself.
We fix this issue by only treating the lnwallet.ErrMaxHTLCNumber as the
only error that prompts adding an HTLC to the overflow queue rather
than sending the error directly back to the switch.
This commit alters the existing retribution
post breach conf test case with the intention
of testing the correct response in event that
the remote party broadcasts a prior state
while HTLCs have been extended. This serves
as a preliminary integration for an expansion
of the breach arbiter integration tests.
The primary change involves using the new
htlchodl mode for debugging, which causes the
remote peer to ignore any intent to settle
incoming HTLCs. The result is that any
payments sent to the remote party are held in
limbo, allowing us to test for these
conditions more accurately.
Currently the test case only tests that the
justice transaction is mined. After we have
fully integrated the breach arbiter to sweep
2nd layer HTLCs, this test will be altered
to check for spends from the appropriate
inputs.
This commit adds a breached contract retribution storage layer using
boltdb to the breach arbiter. The breach arbiter now stores retribution
state on disk between detecting a contract breach, broadcasting a
justice transaction that sweeps the channel, and finally witnessing the
justice transaction confirm on the blockchain. It is critical that such
state is persisted on disk, so that if our node restarts at any point
during the retribution procedure, we can recover and continue from the
persisted state.
This commit modifies the HTLC integration tests to be mindful of the
max payment size. Rather than sending the payment in one large batch,
we instead now send it in chunks of the max payment size.
This commit prevents the case where btcd stops before lnd is fully
started, thus making lnd_test hang on trying to stop lnd using
`StopDaemon`. The underlying issue is that while lnd is trying to
start the server and subscribe to block notifications from btcd,
btcd stops, and lnd continues to attempt to reconnect before it
ever starts the interrupt handler. This reversal avoids that issue
by making sure lnd is stopped before btcd.
In the "multiple channel creation" test, in some cases the
responder (Bob) was not yet considering the first channel
to be opened (activeReservation still not deleted in
fundingManager) when Alice tried to open the second channel.
This would cause the test to fail. This commit adds a small
sleep before the creation of the second channel, to give
Bob some time to finish the opening process.
This commit updates the integration tests to reflect the reality after
removing code that would always attempt to increment the current update
timestamp by one for each channel announcement. Without connecting
directly to carol, it isn’t guaranteed that Alice will receive that
announcement as Bob would have already processed one for Carol when
their channel was created.
Make the fundingmanager send an updated node announcement
each time it opens a new channel. This is to make sure
our node announcement is propagated in the network, since
peers will ignore our node announcements if we haven't
opened any channels yet.
Within the network, it's important that when an HTLC forwarding failure
occurs, the recipient is notified in a timely manner in order to ensure
that errors are graceful and not unknown. For that reason with
accordance to BOLT №4 onion failure obfuscation have been added.
This commit fixes a minor bug in the goroutine that’s launched to check
the sync status of a particular node. Previously, the goroutine could
end up infinitely stuck on a send as once the chain has been detected
as synced, it didn't exit.
We fix this now by ensure that the goroutine always terminates after
the initial notification to the caller. Additionally, we not ensure
that both the internal and exterior goroutine are both reading off of
the peer’s quit channel.
This commit modifies the travis build script, and our local test script
to ensure that the race condition builds are conducted in a parallel
build. After this commit two travis builds will be kicked off for each
push/commit: one that runs the race condition tests in isolation, and
another that runs the integration tests then the coverage tests.
In order to do the above cleanly, the integration tests are now guarded
behind a build flag. In order to run the integration tests, one now
needs to specify the `-tags rpctest` flag when running the `go test`
command.
In this commit additional test have been added which tests the ability
of Alice and Bob asynchroniously exchange the payment between each
other. This scenario will be higly frequent in the payment between
payment providers.
In order to not close the payment stream on payment error the additional
field have been added in payment response. Now error from stream Recv()
function means that something has happend inside the client and we unable
to process any payment farther, and error inside the payment response
means, that something wrong has happend with payment itself.
This commit replaces the hard-coded 5000 satoshi fees with calls to the
FeeEstimator interface. This should provide a way to cleanly plug in
additional fee calculation algorithms in the future. This change
affected quite a few tests. When possible, the tests were changed to
assert amounts sent rather than balances so that fees wouldn't need to
be taken into account. There were several tests for which this wasn't
possible, so calls to the static fee calculator were made.
This commit changes the SingleHop and MultiHop integration tests to
assert amounts sent rather than balances. Because fees can be odd
amounts, this change makes it such that fee amounts don't need to be
explicitly taken into account in the tests.
This commit changes t.Fatal to t.Fatalf in TestCheckDustLimit so as to
provide more information. This commit also makes some column width
adjustments and minor spelling/formatting changes.
This commit allows users to sign messages with their node's private key
with the SignMessage interface. The signatures are zbase32 encoded for
human readability/paste-ability. Others users can verify that a message
was signed by another node in their channel database with the
VerifyMessage interface.
This commit fixes a prior bug wherein if a user connected to a peer
using the —perm command, then once the peer was disconnected, we
wouldn’t automatically connect to them.
Issue: 139
This commit contains test case "disconnecting target peer" (second test case) which takes two
connected peers, then checks via assert method one connection exists,
then disconnects this remote peer by passing pubKey parameter (just some string) into RPC-call method. Then checks 0
connection exists, and then connects disconnected peer for passing
further tests, and then checks one connection exists.
The recent multi-chain features resulted in a new directory structure
that wasn’t properly observed by the integration tests. This commit
fixes a prior bug that wouldn’t allow the test to copy the prior
revoked channels to the current state.
This commit is tied to the prior commit and it patches up a lingering
race condition and deadlock that can arise due to now properly waiting
for all goroutine to exit before concluding the shutdown process.
This commit modifies the testNodeAnnouncment to no longer open a
channel for the duration of the test. As the test is only exercising
the proper behavior of announcement propagation and doesn’t require a
channel to be open for the duration. Also we now properly shutdown the
created “dave” node, as it’s no longer needed after the tests
concludes.
Use addresses and ports from NodeAnnouncement messages for reconnection
attempts. For those nodes that don't explicitly report IP addresses, use
the IP address from previous connections connection request along with
the default peer port number.
Minor change to server.go to add ExternalIPs to
channeldb.LightningNode. Also, added a test that utilizes this
functionality and exercises multiple addresses in NodeAnnouncement.
This commit removes a number of sleeps from the set of current
integration tests by replacing them with a synchronous (w/ a timeout)
block until one or many channels are detected as being open within the
network.
As a result, the tests are now more robust, many flakes have been
eliminated, and finally this shaves a few second off of the integration
testing runs.
This commit modifies the two newly added network announcement hook stop
be at the lightningNode level rather than on the level of the entire
test framework. With this, callers are now able to better utilize the
newly added RPC’s since they can target particular peers and wait for
network messages to be processed rather then depending on a single node
(Alice) for information about the announcements propagated within the
network.
This commit adds the FundingManagerPersistence test to ensure that the
funding process completes as expected when nodes shutdown after the the
funding transaction has been broadcast. Note that the final parts of
several wallet tests have been removed, as functionality has been moved
to the Funding Manager and should now be tested there.
github.com/lightningnetwork/lnd master ✗
0m ◒
▶ golint
htlcswitch.go:292:4: should replace numUpdates += 1 with numUpdates++
htlcswitch.go:554:6: var onionId should be onionID
htlcswitch.go:629:7: var onionId should be onionID
lnd_test.go:133:1: context.Context should be the first parameter of a
function
lnd_test.go:177:1: context.Context should be the first parameter of a
function
networktest.go:84:2: struct field nodeId should be nodeID
peer.go:1704:16: should omit 2nd value from range; this loop is
equivalent to `for invoice := range ...`
rpcserver.go:57:6: func newRpcServer should be newRPCServer
github.com/lightningnetwork/lnd master ✗
9m ⚑ ◒ ⍉
▶ go vet
features.go:12: github.com/lightningnetwork/lnd/lnwire.Feature
composite literal uses unkeyed fields
fundingmanager.go:380: no formatting directive in Errorf call
exit status 1
In this commit we modify the testSingleHopInvoice test to ensure that
we obtain the proper preimage from the SendPayment RPC upon successful
payment completion.
This commit adds a new assertion in the channel force closure test in
order to exercise the fix for a bug related to channel force closure
implemented in a prior commit. With this new assertion, we ensure that
bob is aware of his on-chain balance after a force channel closure
initiated by alice.
This commit elminates a sleep in the testHtlcErrorPropagation test by
instead polling for the existence of our target in a tight loop. This
is a small patch over until we get a “topology client” within the
ChannelRouter. This method is robust and can be applied in future tests
until we get the notification client into the ChannelRouter.
This commit slightly optimizes the process of broadcasting a message to
a list of peers, and also sending a set of messages to a target peer.
When broadcasting a message to a set of target peers, we now launch a
goroutine for each send as to not block the ChannelRouter on an
individual send. When sending a set of messages to a target peer, we
now give up the mutex as soon as we’ve access the map, rather than
holding onto it until the sending is complete.
This commit adds a new restriction around funding channels at the
daemon level: lnd nodes will not allow either the initiation or the
acceptance of a channel before the node is fully synced to the best
known chain.
This fixes a class of bug that arises when a new node joins the network
and either attempts to open a channel or has a channel extended to them
before the node is fully synced to the network.
This commit implements the newly added RPC to decode payment requests
passed over the command line or directly via gRPC.
With this tool, users can now examine payment requests they see in the
wild for diagnostic or debugging purposes.
This commit adds support for pushing funds during the funding process
to the helper method in the integration testing framework.
Additionally, we also modify the simple testBasicChannelFunding test to
also push over an amount in order to test the functionality within the
daemon.
With this commit we have gained a new interaction tests which excursus
all the possible multi-hop error cases aside from:
* sphinx packet corruption
The case can’t be adequately tested with the current integration
testing framework as we can’t arbitrary modify packets en route to
peers within the proto test network. In a future commit, the p2p test
framework whcih has been started by andrew.shvv will be used to ensure
proper handling of this error.
This commit ensures that any extra nodes that were created as part of
the integration tests are shutdown at the end of the test after it
completes successfully. This should speed up the tests as we’ll no
longer have lingering nodes in the background of the test consuming
resources.
This commit adds an additional test case to the `testSingleHopInvoice`
test in order to exercise the proper parsing and dispatching of encoded
payment requests using the zpay32 encoding scheme.
With this test we ensure that the daemon properly encodes payreq’s upon
the creation of invoices, and also that the SendPayment RPC is able to
parse the payment request and properly complete a payment based off of
one.
testMultiHopPayments was failing intermittently due to a lack of
thread-safety in the gRPC stream. This commit takes payment sending out
of goroutines so that they execute serially.
This commit makes a large number of minor changes concerning API usage
within the deamon to match the latest version on the upstream btcsuite
libraries.
The major changes are the switch from wire.ShaHash to chainhash.Hash,
and that wire.NewMsgTx() now takes a paramter indicating the version of
the transaction to be created.
As we’re switching to a more up to date btcd branch that properly
guards the activation of the soft-forks we rely on, we’ll also need to
ensure the two soft-forks have activated.
Moved transaction states from in-memory maps to persistent BoltDB
buckets. This allows channel force closes to operate reliably if the
daemon is shut down and restarted at any point during the forced
channel closure process.
This commit adds a much needed feature to the daemon, namely the
ability to force close a channel while the source daemon doesn’t have
an active connection to the counter party. Previously this wasn’t
possible as ALL channel closures were routed through the htlcSwitch
which is only able to trigger a channel closure if the peer is online.
To remedy this, if the closure type is “force” then, we now handle the
channel closure and related RPC streaming updates from the call handler
site of the RPC itself. As a result, there are now only two htlcSwitch
channel closure types: breach, and regular. The logic that’s now in the
rpcSever should likely be refactored into a distinct sub-system, but
getting the initial functionality in is important.
Finally, the channel breach integration test has been modified to skip
connection the peers before attempting the forceful channel closure of
a revoked state as the remote peer no longer needs to be online.
This commit adds a short sleep before a channel assertion in the
`testMaxPendingChannels` test. This sleep serves to give the nodes
enough time to propagate the new channel announcement over the
authenticated gossip system. Without this sleep, the call may be issued
in a state wherein only half of the channel announcement has fully
propagated.
This commit slightly refactors the logic for the new outgoing payment
related RPC’s to more closely match the style of the rest of the
codebase. Additionally the tests have been updated to reflect the
changes to the protos of the new RPC’s.
Go-fmt files. Refactored code according to the guidelines.
Enhanced payment test: add error checking
and individual context for each API call.
Add Timestamp field to payment struct.
This commit modifies the channel closing logic to remove the hard coded
bools indicating which side is attempting the closure. With the recent
changes, the initiator must always pay the channel closure fees.
This information is recently stored on disk, therefore we can use the
boolean to ensure that the closure transaction is created properly no
matter who initiates the close.
This fixes a bug.
This commit introduces a new sub-system into the daemon whose job it is
to vigilantly watch for any potential channel breaches throughout the
up-time of the daemon. The logic which was moved from the utxoNursery
in a prior commit now resides within the breachArbiter.
Upon start-up the breachArbiter will query the database for all active
channels, launching a goroutine for each channel in order to be able to
take action if a channel breach is detected. The breachArbiter is also
responsible for notifying the htlcSwitch about channel breaches in
order to black-list the breached linked during any multi-hop forwarding
decisions.
This commit modifies the invoices generated during the
testRevokedCloseRetribution integration test to ensure that the
invoices are globally unique within the context of the integration
tests.
This commit adds a new rather extensive integration tests to excerise
uncooperative channel breaches triggered by a counter-party
broadcasting a previously revoked commitment state.
In order to programmatically script such logic using the integration
testing framework, the test manually manipulates the database files of
one of the nodes within the test network in order to force Bob to
travel back in time to a revoked commitment state. With this
manipulation, we then force Bob to broadcast the revoked state,
triggering Alice’s retribution logic which sweeps ALL the funds within
the channel.
This commit slightly modifies the existing CT struct in order to
maintain consistency with code-style. As a result of the name change,
all references have also been renamed from `ct` to `t`.
The Error and Errorf methods have been removed in favor of forcing
everything to be reported via `Fatalf`. Additionally a new method
(ProcessErrors) has been introduced to the networkHarness class in
order to encapsulate the underlying channel.
