Commit Graph

802 Commits

Author SHA1 Message Date
yyforyongyu
b01947b7dc lnd: fix go fmt 2020-07-08 16:46:51 +08:00
carla
d8a4b37c0e
contractcourt: persist commit sweep resolutions 2020-07-07 19:49:58 +02:00
carla
a38dc256fd
contractcourt: persist remote outgoing htlc claim outcome on disk
When a remote peer claims one of our outgoing htlcs on chain, we do
not care whether they claimed with multiple stages. We simply store
the claim outgome then forget the resolver.
2020-07-07 19:49:56 +02:00
carla
03b76ad9a4
contractcourt: save htlc success resolvers, including first stage
Checkpoint our htlc claims with on chain reasolutions, including our
first stage success tx where required.
2020-07-07 19:49:55 +02:00
carla
cf739f3f87
contractcourt: persist timed out incoming htlc resolver reports
Incoming htlcs that are timed out or failed (invalid htlc or invoice
condition not met), save a single on chain resolution because we don't
need to take any actions on them ourselves (we don't need to worry
about 2 stage claims since this is the success path for our peer).
2020-07-07 19:49:54 +02:00
carla
f5b20b7429
contractcourt: store anchor resolutions on disk 2020-07-07 19:49:53 +02:00
carla
578af99618
channeldb: save resolver outcomes in close summaries top level bucket
Add a new top level bucket which holds closed channels nested by chain
hash which contains additional information about channel closes. We add
resolver resolutions under their own key so that we can extend the
bucket with additional information if required.
2020-07-07 19:49:36 +02:00
Wilmer Paulino
6075997ebc
multi: add relative thaw height interpretation
This is useful when we wish to have a channel frozen for a specific
amount of blocks after its confirmation. This could also be done with an
absolute thaw height, but it does not suit cases where a strict block
delta needs to be enforced, as it's not possible to know for certain
when a channel will be included in the chain. To work around this, we
add a relative interpretation of the field, where if its value is below
500,000, then it's interpreted as a relative height. This approach
allows us to prevent further database modifications to account for a
relative thaw height.
2020-07-02 12:05:49 -07:00
Conner Fromknecht
11e9fd3e92
channeldb/invoices: special-case all zeros pay addr
Avoids indexing the all-zeros pay addr, since it is still in use by
legacy keysend. Without this, the pay addr index will reject all but the
first keysend since they will be detected as duplicates within the set
id index.
2020-06-26 02:00:03 -07:00
Wilmer Paulino
d23be59f53
channeldb: remove graph insertion of restored channels
This was initially done as there were a few assertions throughout the
codebase requiring a channel's policy to be known. Now that these have
been addressed, we no longer need to store restored channels in the
graph, as their policies where incomplete anyway.
2020-06-18 14:51:44 -07:00
carla
ab594ea57b
channeldb: update QueryPayments to use sequence nr index and paginator
Use the new paginatior strcut for payments. Add some tests which will
specifically test cases on and around the missing index we force in our
test to ensure that we properly handle this case. We also add a sanity
check in the test that checks that we can query when we have no
payments.
2020-06-10 12:55:05 +02:00
carla
38624e8612
channeldb: add fetchPaymentWithSequenceNumber lookup and test
With our new index of sequence number to index, it is possible for
more than one sequence number to point to the same hash because legacy
lnd allowed duplicate payments under the same hash. We now store these
payments in a nested bucket within the payments database. To allow
lookup of the correct payment from an index, we require matching of the
payment hash and sequence number.
2020-06-10 12:55:03 +02:00
carla
eea871b583
channeldb: add a paginator struct to process generic pagination
We now use the same method of pagination for invoices and payments.
Rather than duplicate logic across calls, we add a pagnator struct
which can have query specific logic plugged into it. This commit also
addresses an existing issue where a reverse query for invoices with an
offset larger than our last offset would not return any invoices. We
update this behaviour to act more like c.Seek and just start from the
last entry. This behaviour change is covered by a unit test that
previously checked for the lack of invoices.
2020-06-10 12:49:48 +02:00
carla
f4933c67fd
channeldb: add test case for index offset greater than index
In our current invoice pagination logic, we would not return any
invoices if our offset index was more than 1 off our last index and we
were paginating backwards. This commit adds a test case for this
behaviour before fixing it in the next commit.
2020-06-10 12:49:13 +02:00
carla
c8d11285f3
channeldb: index payments by sequence number
Add an entry to a payments index bucket which maps sequence number
to payment hash when we initiate payments. This allows for more
efficient paginated queries. We create the top level bucket in its
own migration so that we do not need to create it on the fly.

When we retry payments and provide them with a new sequence number, we
delete the index for their existing payment so that we do not have an
index that points to a non-existent payment.

If we delete a payment, we also delete its index entry. This prevents
us from looking up entries from indexes to payments that do not exist.
2020-06-10 12:49:06 +02:00
carla
6c4a1f4f99
channeldb: update TestQueryPayments to cover duplicate payments
Update our current tests to include lookup of duplicate payments. We
do so in preparation for changing our lookup to be based on a new
payments index. We add an append duplicate function which will add a
duplicate payment with the minimum information required to successfully
read it from disk in tests.
2020-06-10 12:34:27 +02:00
Andras Banki-Horvath
80012c3936
invoice+test: changing testitfy asserts to specific requires 2020-06-05 15:16:31 +02:00
Andras Banki-Horvath
574bbe5eba
invoices+test: replace DeepEqual + spew dump with testify
This commit replaces reflect.DeepEqual tests and spew.Dump prints with
testify's require.Equal to make diffs smaller and test outputs more
readable.
2020-06-05 15:16:27 +02:00
Andras Banki-Horvath
3e5e60cac4 lnd+kvdb: pass LND abort context to etcd 2020-06-03 17:44:44 +02:00
Andras Banki-Horvath
d3545830c9 kvdb+etcd: integrate the abort context to the STM retry loop
This commit extends the etcd.BackendConfig to also provide an abort
context and integrates it with the STM retry loop in order to be able
stop LND when conflicting transactions keep the loop running.
2020-06-03 17:44:44 +02:00
Andras Banki-Horvath
415de2f0c7 kvdb+etcd: remove retry goroutine from the STM
This commit removes the retry goroutine from the STM as the retry loop
is only running when the STM transaction is encapsulated in Update/View
whereas for self-standing transactions we use a different approach.
By removing the goroutine we won't catch panics thrown that are supposed
to be catched outside of the STM.
2020-06-03 17:44:44 +02:00
Joost Jager
d416ed59ea
multi: add explicit hodl invoice flag to invoice
Previously it wasn't possible to store a preimage in the invoice
database and signal that a payment should not be settled right away. The
only way to hold a payment was to insert the magic UnknownPreimage value
in the invoice database. This commit introduces a distinct flag to
signal that an invoice is a hold invoice and thereby allows the preimage
to be present in the database already.

Preparation for (key send) hodl invoices for which we already know the
preimage.
2020-06-02 07:34:23 +02:00
Conner Fromknecht
66652ec4bc
channeldb/db: lower-case ErrDryRunMigrationOk message 2020-05-27 22:42:22 -07:00
Conner Fromknecht
eae8e6de17
channeldb/invoices: correct stray kvdb.ReadBucket to RBucket
We recently renamed kvdb.ReadBucket to kvdb.RBucket in #4252, but this
was not detected in #4285 since this new code didn't produce a
conflict.
2020-05-27 20:20:29 -07:00
Conner Fromknecht
0f3ab775c7
Merge pull request #4285 from cfromknecht/pay-addr-index
channeldb: index payments by payment addr, use payment hash as fallback
2020-05-27 17:36:30 -07:00
Olaoluwa Osuntokun
d2d8793afd
Merge pull request #4298 from cfromknecht/sub-inv-fixes
channeldb+invoices: minor invoice subscription fixes
2020-05-27 15:56:47 -07:00
Conner Fromknecht
cbf71b5452
channeldb+invoices: use payment addr as primary index 2020-05-26 18:55:27 -07:00
Conner Fromknecht
3522f09a08
channeldb+invoices: track invoices by InvoiceRef 2020-05-26 18:55:27 -07:00
Conner Fromknecht
e80e21d1a8
channeldb/migration: add generic CreateTLB migration
This commit creates a generic migration for creating top-level buckets.
2020-05-26 18:55:27 -07:00
Conner Fromknecht
24cce7a6ec
channeldb: consolidate top-level bucket create/wipe 2020-05-26 18:55:27 -07:00
Conner Fromknecht
d343575104
channeldb/migtest: log migration failure instead of failing
This line was incorrectly moved when the migtest package was created for
migration 12. This PR introduces a negative test for CreateTLB which
surfaced this.
2020-05-26 18:55:22 -07:00
Conner Fromknecht
ef9068319b
multi: rename ReadCursor to RCursor 2020-05-26 18:21:08 -07:00
Conner Fromknecht
455ddfebdb
multi: rename: ReadBucket to RBucket 2020-05-26 18:21:08 -07:00
Conner Fromknecht
d0d2ca403d
multi: rename ReadTx to RTx 2020-05-26 18:20:37 -07:00
Conner Fromknecht
1332575482
channeldb/invoices: ignore error when no settles exist
This fixes a bug that would cause no backlog to be delivered at all.
2020-05-26 17:50:45 -07:00
Andras Banki-Horvath
c3fcfd1530 etcd: add namespace support to separate key spaces
This commit extends etcd db with namespaces without additional storage
space requirements. This is simply done by instead of using an all zero
root bucket id, we use the sha256 hash of the name space as our root
bucket id.
2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
bce0597643 channeldb: silence linter 2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
85aee9b064 kvdb+lncfg: fully move etcd behind build tag
This commit separates all etcd related sources (sans a few stubs and
config) from the rest of the source tree and makes compilation conditional
depending on whether the kvdb_etcd build tag is specified.
2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
3ef331e016 lncfg+etcd: add TLS config
This commit extends lncfg with etcd TLS config and passes these
parameters to the etcd client upon construction.
2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
b54f8a1b97 kvdb+channeldb: create ExtendedBackend interface to allow rich tx logic
This commit adds the ExtendedBackend interface which is an extension to
the walletdb.DB interface. This paves the way to using etcd.db.View and
etcd.db.Update in the global View and Update functions without much code
rewrite.
2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
23fcb59a2b channeldb: convert payment tests to use test backend 2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
02f9d91e49 kvdb+etcd: only lock on bucket path mod revision for reads and writes
This commit reduces the compare set size the STM will submit in
transactions by adding only the bucket keys along the bucket path to a
specific lock set. This lock set then used to filter the read set,
effectively removing all read only keys from the transaction predicate
that are not bucket keys.
By tracking if a read-write tx actually changes something, we can also
"bump" the mod revision of the bucket keys.
With this trick we essentially implement a read-write lock for our
bucket structure greatly reducing transaction processing time.
2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
859a457e48 kvdb+etcd: extend kvdb and STM with stats
The commit itslef adds stats to the transactions such that we can see
how LND behaves with and etcd backend.
2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
248a00f211 kvdb+etcd: enable channeldb testing with both bdb/etcd 2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
3b7525659c channeldb+kvdb: add walletdb interface test
This commit adds walletdb interface test suite to the existing test set.
2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
6a24a03cec channeldb+kvdb: walletdb/kvdb interface etcd implementation
This commit adds a full interface implementation of the walletdb/kvdb
interface with detailed tests.
2020-05-22 11:26:25 +02:00
Andras Banki-Horvath
137dee04e8 channeldb+kvdb: an extended STM on top of etcd clientv3
This commit adds an extended STM, similar to what available in etcd's
clientv3 module. This incarnation of said STM supports additional
features, like positioning in key intervals while taking into account
deletes and writes as well. This is a preliminary work to support all
features of the kvdb interface.
2020-05-22 11:26:24 +02:00
Oliver Gugger
a17ddc5dd1
channeldb+htlcswitch: don't use fastsha256 in tests
The btcsuite/fastsha256 registers itself in the crypto package of
golang as a replacement for sha256. This causes problems in TLS1.3
connections that require the hash implementations to be serializable
and results in the "tls: internal error: failed to clone hash" error.
By removing all uses of the library we fix that error.
2020-05-20 11:07:38 +02:00
Conner Fromknecht
2f84d1a819
Merge pull request #4280 from cfromknecht/read-for-each-node
channeldb: remove Tx arg from ForEachNode
2020-05-13 16:37:10 -07:00
Conner Fromknecht
90d3bf532d
channeldb+routing: remove tx arg for ForEachNode 2020-05-12 17:53:20 -07:00
Joost Jager
cc37485432
routing: return full htlc attempt from shard handler 2020-05-12 19:56:50 +02:00
Conner Fromknecht
c775819372
channeldb/db: adds optional dry-run abort for migrations 2020-05-11 15:38:45 -07:00
Olaoluwa Osuntokun
cc1dbb5677
channeldb: eliminate extra copy in QueryPayments
In this commit, we eliminate an extraneous copy in the `QueryPayments`
method. Before this commit, we would copy each payment from the initial
FetchPayments call into a new slice. However, pointers to payments are
return from `FetchPayments`, so we can just maintain that same reference
rather than copying again when we want to limit our response.
2020-05-04 12:13:47 -07:00
Andras Banki-Horvath
556e3525ea misc: fix error formatting in multiple files 2020-04-24 19:15:08 +02:00
Andras Banki-Horvath
e636364ccf channeldb: remove dead code from payments test 2020-04-24 19:15:08 +02:00
Andras Banki-Horvath
3628e65378 channeldb: (nit) remove size argument from map make 2020-04-24 19:15:08 +02:00
Joost Jager
7fc1938f10
routing: payment splitting pre-check
This commit reverts cb4cd49dc8d3b0255afe9ff29af9c46c2dbb2c98 to bring
back the insufficient local balance failure.

Distinguishing betweeen this failure and a regular "no route" failure
prevents meaningless htlcs from being sent out.
2020-04-18 08:30:26 +02:00
Conner Fromknecht
93089aaaf8
channeldb/channel: don't print ChanStatusDefault when it's not
This commit removes ChanStatusDefault from the list of
orderedChanStatusFlags since it is not flag. As with the prior commit,
the logic around these flags assumes everything in the list is a flag,
but ChanStatusDefault is not.

It turns out we properly special case that if the channel is in
ChanStatusDefault that we only return ChanStatusDefault. However, if any
of the bits are set we would always report ChanStatusDefault since
status&0 == 0. This fixed simply by removing ChanStatusDefault from the
list since we only need the list to express non-default status flags.
2020-04-10 16:11:44 -07:00
Conner Fromknecht
f71cc951fd
channeldb/channel: fix HasChanStatus for ChanStatusDefault
This commit resovles a lingering issue w/in the codebase wrt how the
ChannelStatus flags are defined. Currently ChannelStatus is improperly
used to define a bit field and the individual flags themselves. As a
result, HasChanStatus accepts queries on particular status (combinations
of flags) and individual flags themselves.

This is an issue because the way HasChanStatus computes whether the
channel has a particular status assumes the provided inputs are all
flags (or at least combinations of flags).

However, ChanStatusDefault is simply the absence of any other flag.
Hence, HasChanStatus will always return true when querying for
ChanStatusDefault because status&0 == 0 is always true.

Longer term we should should consider splitting these definitions into
flags and particular states, and change the way construct or operate on
them, but for now I've just special-cased this one value. Fortunately,
we don't query HasChannelStatus w/ ChanStatusDefault anywhere in the
codebase so we dodge a bullet here, but it'd be nice to have some
greater assurances moving forward.
2020-04-10 16:05:12 -07:00
Joost Jager
cb4cd49dc8
routing: map insufficient local bandwidth error to no path
With mpp it isn't possible anymore for findPath to determine that there
isn't enough local bandwidth. The full payment amount isn't known at
that point.

In a follow-up, this payment outcome can be reintroduced on a higher
level (payment lifecycle).
2020-04-09 08:20:35 +02:00
Joost Jager
278915e598
channeldb: return updated payment on attempt update
Similar to what is done for SettleAttempt.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2020-04-08 08:54:01 +02:00
Olaoluwa Osuntokun
7e6f3ece23
Merge pull request #3960 from bitromortac/listpayments-pagination
channeldb+lnrpc+lncli: listpayments pagination support
2020-04-07 17:06:37 -07:00
Conner Fromknecht
310e20f8b7
invoices/invoiceregistry: remove debug spew 2020-04-07 11:54:29 -07:00
bitromortac
d5dd48fa71 channeldb/test: unit tests for payments query
Adds tests for the payments query, where different edge cases for
the index offsets and normal and reversed orders are tested.
2020-04-07 07:03:21 +02:00
bitromortac
4c5e8aec41 channeldb: add payments query
Adds a PaymentsQuery struct, which contains parameters to restrict the
response of QueryPayments, returning a PaymentsQuerySlice with the
payments query result. The behavior of this api is the same as
the QueryInvoices one.
2020-04-07 07:03:21 +02:00
bitromortac
4800a84122 channeldb: export sequenceNum in MPPayment
Exports sequenceNum in MPPayment for later use
in the rpcserver.
2020-04-07 07:03:21 +02:00
Olaoluwa Osuntokun
92ee49767f
Merge pull request #3970 from halseth/amp-router-mvp-2020
MPP: Enable MultiPathPayments for payment lifecycle
2020-04-03 13:53:19 -07:00
Conner Fromknecht
9385b8cdc6
channeldb+lnwallet: move ActiveHtlcs calc to OpenChannel 2020-04-02 17:39:10 -07:00
Johan T. Halseth
864e64e725
channeldb: validate MPP options when registering attempts
We add validation making sure we are not trying to register MPP shards
for non-MPP payments, and vice versa. We also add validtion of total
sent amount against payment value, and matching MPP options.

We also add methods for copying Route/Hop, since it is useful to use
for modifying the route amount in the test.
2020-04-02 19:31:23 +02:00
Johan T. Halseth
9a1ec950bd
channeldb/payments: extract common info fetch into fetchCreationInfo 2020-04-02 19:29:15 +02:00
Johan T. Halseth
7b318a4be7
routing/payment_lifecycle+channeldb: enable multi shard send
This commit finally enables MP payments within the payment lifecycle
(used for SendPayment). This is done by letting the loop launch shards
as long as there is value remaining to send, inspecting the outcomes for
the sent shards when the full payment amount has been filled.

The method channeldb.MPPayment.SentAmt() is added to easily look up how
much value we have sent for the payment.
2020-04-02 19:29:15 +02:00
Johan T. Halseth
3610824abd
channeldb/payment_control_test: add TestPaymentControlMultiShard 2020-04-02 19:29:14 +02:00
Johan T. Halseth
70202be580
channeldb: make database logic MPP compatible
This commit redefines how the control tower handles shard and payment
level settles and failures. We now consider the payment in flight as
long it has active shards, or it has no active shards but has not
reached a terminal condition (settle of one of the shards, or a payment
level failure has been encountered).

We also make it possible to settle/fail shards regardless of the payment
level status (since we must allow late shards recording their status
even though we have already settled/failed the payment).

Finally, we make it possible to Fail the payment when it is already
failed. This is to allow multiple concurrent shards that reach terminal
errors to mark the payment failed, without havinng to synchronize.
2020-04-02 19:29:14 +02:00
Johan T. Halseth
f6c97daf0c
channeldb/payment_control_test: simplify HTLC status assertion 2020-04-02 10:24:36 +02:00
Johan T. Halseth
7b5c10814b
routing/payment_lifecycle+channeldb: collect existing outcome first
To move towards how we will handle existing attempt in case of MPP
(collecting their outcome will be done in separate goroutines separate
from the payment loop), we move to collect their outcome first.

To easily fetch HTLCs that are still not resolved, we add the utility
method InFlightHTLCs to channeldb.MPPayment.
2020-04-02 10:24:35 +02:00
Johan T. Halseth
9bcf41d401
channeldb: make FailureReason Error() 2020-04-02 10:24:34 +02:00
nsa
f757bf48bd channeldb: use RemoteCommitment in NextLocalHtlcIndex
This commit changes the fallback in NextLocalHtlcIndex to
RemoteCommitment since the LocalHtlcIndex field lags behind
on the LocalCommitment. Without this bug fix, open circuits
would get prematurely trimmed, resulting in more erroneous
logs. A test case is included to check that the fix works.
2020-03-25 11:49:16 -04:00
Olaoluwa Osuntokun
421d73b72e
channeldb: add new frozen channel type bit and thaw height
In this commit, we add a new channel type bit: a frozen channel. A
frozen channel is one that can only be cooperatively closed by the
responder, but not the initiator. This channel type is useful for
certain classes of channel factory like protocols. We then add a new key
on the channel bucket level to store the height after which this
restriction no longer applies.
2020-03-23 16:56:48 -07:00
carla
41355756a1
channeldb: add balance at height lookup
Add a balance at height lookup function which can be used to
obtain local/remote balance at a given height. The current in memory
commits and revocation log are used to source this information.
2020-03-19 13:20:17 +02:00
Olaoluwa Osuntokun
a4e39906b1
build: silence new linter errors, tidy modules
The explicit `bbolt` dep is gone, as we depend on `kvdb`, which is
actually `walletdb`, which has its own module that defines the proper
`bbolt` version.
2020-03-18 19:35:29 -07:00
Olaoluwa Osuntokun
f0911765af
channeldb: convert to uniformly use new kvdb abstractions
In this commit, we migrate all the code in `channeldb` to only reference
the new `kvdb` package rather than `bbolt` directly.

In many instances, we need to add two version to fetch a bucket as both
read and write when needed. As an example, we add a new
`fetchChanBucketRw` function. This function is identical to
`fetchChanBucket`, but it will be used to fetch the main channel bucket
for all _write_ transactions. We need a new method as you can pass a
write transaction where a read is accepted, but not the other way around
due to the stronger typing of the new `kvdb` package.
2020-03-18 19:34:49 -07:00
Olaoluwa Osuntokun
fc808ac538
channeldb/kvdb: create new package for an abstract kv store
In this commit, we create a new package `kvdb`, which is meant to serve
as the basis for any future database abstractions within `lnd`. Rather
than directly use the `walletdb` package (which we base off of), we
instead use a series of type-aliases to re-type the fundamental
types/interfaces of the `walletdb` package. This lets us type
`kvdb.RwTx` instead of `walletdb.ReadWriteTransaction` everywhere.
Additionally, our usage of type-aliases is also intended to create an
easy pathway in the future wherein we can gradually re-defined or
re-implement these types to wean off of the `walletdb` package.
2020-03-18 19:34:45 -07:00
Olaoluwa Osuntokun
3dda93e30d
Merge pull request #3821 from halseth/pluggable-anchors-lnwallet
[anchor] pluggable anchor commitments
2020-03-09 19:49:05 -07:00
Joost Jager
866623e84b
channeldb/migration13: migrate to mpp structure
This commit migrates the payments in the database to a new structure
that allows for multiple htlcs per payments. The migration introduces a
new sub-bucket that contains a list of htlcs and moves the old single
htlc into that.
2020-03-09 18:31:39 +01:00
Joost Jager
4cea2d5213
channeldb/migtest: add migration test tools
This commit adds test helper code to dump, restore and verify the
low-level bbolt database structure.
2020-03-09 18:31:37 +01:00
Joost Jager
f86e68a1a2
channeldb+routing: store full htlc failure reason
This commit extends the htlc fail info with the full failure reason that
was received over the wire. In a later commit, this info will also be
exposed on the rpc interface. Furthermore it serves as a building block
to make SendToRoute reliable across restarts.
2020-03-09 18:31:35 +01:00
Joost Jager
48c0e42c26
channeldb+routing: store all payment htlcs
This commit converts the database structure of a payment so that it can
not just store the last htlc attempt, but all attempts that have been
made. This is a preparation for mpp sending.

In addition to that, we now also persist the fail time of an htlc. In a
later commit, the full failure reason will be added as well.

A key change is made to the control tower interface. Previously the
control tower wasn't aware of individual htlc outcomes. The payment
remained in-flight with the latest attempt recorded, but an outcome was
only set when the payment finished. With this commit, the outcome of
every htlc is expected by the control tower and recorded in the
database.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2020-03-09 18:31:33 +01:00
Johan T. Halseth
af68ff1640
lnwallet: add anchor commitmenttype
With this commitment type, we'll add extra anchor outputs to the
commitment transaction if the anchor channel type is active.
2020-03-09 12:10:59 +01:00
Johan T. Halseth
b25f2fa94b
channeldb: define AnchorOutputsBit channel type 2020-03-09 12:10:58 +01:00
Joost Jager
c357511051
channeldb/migtest: remove channeldb dependency
Removes this unnecessary dependency allowing migration code to use
utility functions from channeldb/migtest.
2020-03-09 11:43:42 +01:00
Joost Jager
4c74c0817e
channeldb/test: extend payment control test with failed attempt 2020-03-09 11:43:40 +01:00
Joost Jager
fa3a762a2c
channeldb: add error return value to fetchPaymentStatus
Preparation for when we need to return errors in a next commit.
2020-03-09 11:43:38 +01:00
Joost Jager
cc5e18c487
channeldb: isolate duplicate payments
Duplicate payments is legacy that we keep alive for accounting purposes.
This commit isolates the deserialization logic for duplicate payments in
its own file, so that regular payment logic and db structure can evolve
without needing to handle/migrate the legacy data.
2020-03-09 11:43:30 +01:00
Joost Jager
c29b74168f
channeldb/test: refactor payment control test
Previously this was tested as a white box. Database access methods were
duplicated as test code and compared to the return value of the code
under test. This approaches leads to brittle test because it relies
heavily on implementation details. This commit changes this and prepares
for additional test coverage being added in later commits.
2020-03-09 11:43:28 +01:00
Johan T. Halseth
bee2380441
channeldb: rename PaymentAttemptInfo to HTLCAttemptInfo
To better distinguish payments from HTLCs, we rename the attempt info
struct to HTLCAttemptInfo. We also embed it into the HTLCAttempt struct,
to avoid having to duplicate this information.

The paymentID term is renamed to attemptID.
2020-03-09 11:43:26 +01:00
Joost Jager
967b4b2dc3
channeldb: remove redundant MPPaymentCreationInfo struct
MPPaymentCreationInfo and PaymentCreationInfo are identical except for
the naming of CreationTime/CreationDate.
2020-03-09 11:43:24 +01:00
carla
11d975bd13
channeldb: save channel status on channel close
Add an optional channel status CloseChannel which will be stored on the
hitsorical channel which is persisted at channel close. This status is
used to set the close initiator for channels that do not complete the
funding flow or we abandon. In follow up commits, this status will be
used to record force and breach closes. The value is written to the
historical channel bucket for diplay over rpc.
2020-02-21 13:33:53 +02:00
carla
d3cb6ad869
channeldb: store close initiator status
This commit adds two new channel statuses which indicate the party that
initatited closing the channel. These statuses are set in conjunction
with the existing commit broadcast status so that we do not need to
migrate existing logic to handle multiple types of closes. This status
is set for locally initiated force closes in this commit because they
follow a similar pattern to cooparative closes, marking the commitment
broadcast then proceeding with tx broadcast. Remote force closes are
added in the following commit, as they are handled differently.
2020-02-21 13:33:49 +02:00
carla
8d632b8022
channeldb: add historical channel bucket lookup 2020-02-21 13:23:30 +02:00
Johan T. Halseth
cdf3a49c54
channeldb: remove unused payments status serialization 2020-02-18 13:01:57 +01:00