In this commit, we update the `AbandonChannel` method to also remove the
state from the countract court as well as the channel graph. Abandoning
a channel is now a three step process: remove from the open channel
state, remove from the graph, remove from the contract court. Between
any step it's possible that the users restarts the process all over
again. As a result, each of the steps below are intended to be
idempotent.
We also update the integration test to assert that no channel is found
in the graph any longer. Before this commit, this test would fail as the
channel was still found in the graph, which can cause other issues for
an operational daemon.
Fixes#3716.
The channel arbitrator no longer passes the direct commitment output to
the nursery for incubation. Instead the resolver itself will await the
csv lock if any.
The reason to change this now is to prevent having to deal with the
(legacy) nursery code for a planned anchor outputs related change to the
commit sweep resolver (also csv lock to_remote).
It is no problem if there are any lingering incubating outputs at the
time of upgrade. This just means that the output will be offered twice
to the sweeper and this doesn't hurt.
In this commit, we create a new chainfee package, that houses all fee
related functionality used within the codebase. The creation of this new
package furthers our long-term goal of extracting functionality from the
bloated `lnwallet` package into new distinct packages. Additionally,
this new packages resolves a class of import cycle that could arise if a
new package that was imported by something in `lnwallet` wanted to use
the existing fee related functions in the prior `lnwallet` package.
This commit adds the total observed lifetime of a channel and the
totaluptime of its remote peer to the lnrpc channel struct. These
fields are marked as experimential because they are subject to
change.
With the introduction of the max CLTV limit parameter, nodes are able to
reject HTLCs that exceed it. This should also be applied to path
finding, otherwise HTLCs crafted by the same node that exceed it never
left the switch. This wasn't a big deal since the previous max CLTV
limit was ~5000 blocks. Once it was lowered to 1008, the issue became
more apparent. Therefore, all of our path finding attempts now have a
restriction of said limit in in order to properly carry out HTLCs to the
network.
Fixes https://github.com/lightningnetwork/lnd/issues/3357. When
start_time isn't specified, its default value is 0. This meant when
users explicitly specified a start_time of 0, we would incorrectly set
start_time to 24 hours in the past. Now, n0 means n0.
The policy update logic that resided part in the gossiper and
part in the rpc server is extracted into its own object.
This prepares for additional validation logic to be added for policy
updates that would otherwise make the gossiper heavier.
It is also a small first step towards separation of our own channel data
from the rest of the graph.
In this commit, we fix a bug where if a user updates a forwarding policy to be
zero, the update will be applied to the policy correctly on-disk, but not
in-memory.
We solve this issue by having the gossiper return the list of on-disk updated
policies and passing these policies to the switch, so the switch can assume
that zero-valued fields are intentional and not just uninitialized.
In this commit, we add a new field to the Hop proto to allow callers to
be able to specify TLV records for the SendToRoute call, and also to be
able to display TLV records that were used during regular path finding.
We also update SendPayment to support dest TLV records.
Debug invoices are rarely used nowadays, but keep asking for maintenance
every time refactoring in primarily the invoice registry occurs. We have
passed the cost/benefit tipping point, so therefore the debug invoice
concept is removed in this commit.
Previously the debughtlc flag also controlled whether hodl masks were
active. It is safe to remove that additional condition because the hodl
masks are still guarded by the dev build tag.
Not all errors that occur when serving client requests in the gRPC
server are logged. As a result, at times, we can be lacking critic
information that can be used to debug issues that pop up. With this PR,
we create a basic streaming+unary interceptor that will log all errors
that occur when servicing calls.
The current format looks something like this in the logs when an error
occurs:
```
[ERR] RPCS: [/lnrpc.Lightning/SendCoins]: decoded address is of unknown format
```
lnrpc/rpc.proto: updates RoutingPolicy last_update number
rpcserver: adding LastUpdate field to marshalDbEdge
This commit adds a LastUpdate field to each RoutingPolicy, it will show
the time each RoutingPolicy was updated.
lnrpc: regenerating proto files
In this commit two fields were added to the Channl RPC result in both
open and pending states.
The fields: local_chan_reserve, remote_chan_reserve represents the
reservation the nodes are rquired to keep in both sides of the channel.
This is usefull when calculating the "real" inbound and outbound
liquidity in an accurate way.
This commit fixes a but where restarting LND at the same process causes
It to fail.
The problem resides in the fact that an array of permissions is
initialized as a package variable and when creating the
RPCServer all subserver permissions are appended while checking for
duplicates.
On subsequent restart this array is left over from the previous run and
being populated again with the same permissions causing a duplicate
error.
The solution is simple, just to extract out the initial permissions to
a separate function and call it from the context is is needed.
Earlier versions of ListPayments only included completed payments. We
return to this behavior by ignore all other payments if the nonSucceeded
boolean is not set in the request.
Start the Prometheus exporter in rpcserver.go if monitoring is enabled through the
build tag. Also allow users to specify what address they want the Prometheus
exporter to be listening on.
This commit moves the default timeout out of router and thereby fixes a
bug that caused SendToRoute to not return the actual error, but a
timeout result instead. SendToRoute only tries a single route, so a
timeout should never happen.
This commit makes the router use the ControlTower to drive the payment
life cycle state machine, to keep track of active payments across
restarts. This lets the router resume payments on startup, such that
their final results can be handled and stored when ready.
Now that the success resolver preimage field is always populated by the
incoming contest resolver, preimage lookups earlier in the
process (channel and channel arbitrator) can mostly be removed.
This commit restructures the creation of various tls related object. It
also fixes a bug where wildcard IP addresses where only instantiated for
the main RPC server and not the WalletUnlocker service.
In this commit, we modify the `closeObserver` to fast path the DLP
dispatch case if we detect that the channel has been restored. We do
this as otherwise, we may inadvertently enter one of the other cases
erroneously, causing us to now properly look up their dlp commitment
point.
lnd_test: adding address validation for send coins
The commit adds a test that checks that when a user calls sendcoins, the
receiving address is validated according to the current network. If the
address is not compatible with the current network, it will return an
error to the user.
rpcserver: adding a check for compatible network in SendCoins
This commit adds a check in SendCoins that checks whether the receiving
address is compatible with the current network.
Fixes#2677.
This is a better alternative than retrieving it from the graph as it's
possible that the channel is pruned from it doing to not having any
updates within the past two weeks.
This commit moves the query routes backend logic from the main
rpc server into the sub server. It is another step towards splitting up
the main rpc server code.
In addition to this, a unit test is added to verify rpc parameter
parsing.
Currently public keys are represented either as a 33-byte array (Vertex) or as a
btcec.PublicKey struct. The latter isn't useable as index into maps and
cannot be used easily in compares. Therefore the 33-byte array
representation is used predominantly throughout the code base.
This commit converts the argument types of source and target nodes for
path finding to Vertex. Path finding executes no crypto operations and
using Vertex simplifies the code.
Additionally, it prepares for the path finding source parameter to be
exposed over rpc in a follow up commit without requiring conversion back
and forth between Vertex and btcec.PublicKey.
This commit allows the execution of QueryRoutes to be controlled using
lists of black-listed edges and nodes. Any path returned will not pass
through the edges and/or nodes on the list.
In this commit, we rename the new `MaxHtlc` field to `MaxHtlcMsat`. We
do this in order to adhere to the new practice to suffix each amount
related field with their proper unit.
A recent change in this area of the codebase refactored some code to
make way for the deprecation of the streaming multi-route `SendToRoute`
method. Along the way, it removed the parsing of the `PaymentHashString`
field for the sync `SendToRouteSync` which is meant to be used via the
REST interface. In this commit, we fix this by populating _both_
`PaymentHash` and `PaymentHashString`. This is OK, as
`extractPaymentIntent` will check both values to extract the hex-encoded
payment hash if it's specified.
`createRPCChannel` is used by the `listchannels` RPC call and will be
used by `subscribechannels` as well.
`createRPCClosedChannel` is used by the `closedchannels` RPC call and
will also be used by `subscribechannels`.
This is used by the `listchannels` RPC call and will be used by
`subscribechannels` as well. Its purpose is to mitigate code duplication
between the two RPC calls.
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
In this commit, we modify areas where we need to force close a channel
to use the new FetchChannel method instead of manually scanning. This
dramatically reduces the CPU usage when doing things like closing a
large number of channels within lnd.
In this commit:
* we partition lnwire.ChanUpdateFlag into two (ChanUpdateChanFlags and
ChanUpdateMsgFlags), from a uint16 to a pair of uint8's
* we rename the ChannelUpdate.Flags to ChannelFlags and add an
additional MessageFlags field, which will be used to indicate the
presence of the optional field HtlcMaximumMsat within the ChannelUpdate.
* we partition ChannelEdgePolicy.Flags into message and channel flags.
This change corresponds to the partitioning of the ChannelUpdate's Flags
field into MessageFlags and ChannelFlags.
Co-authored-by: Johan T. Halseth <johanth@gmail.com>
In this commit, we implement the new feature which allows sendcoins to
sweep all the coins in the wallet. We use the new sweep.CraftSweepAllTx
method, and also use WithCoinSelectLock to ensure that we don't trigger
any double-spend errors triggered by coin selection race conditions.
In this commit, we add a new method WithCoinSelectLock. This method will
allow us to fix bugs in the project atm that can arise if a channel
funding is attempted (either manually or by autopilot) while a users is
attempting to send an on-chain transaction. If this happens
concurrently, then both contexts will grab the set of UTXOs and attempt
to lock them one by one. However, since they didn't obtain an exclusive
snapshot of the UTXO set of the wallet, they may both attempt to lock
the same input.
We also ensure that calls to SendMany cannot run into this issue by
using the WithCoinSelectLock synchronization when attempting to instruct
the internal wallet to send payments.
In this commit, we extract the existing determineFeePerKw method on the
RPC server into a new file in the sweep package. Along the way, we
consolidate code by introducing a new FeePreference struct, which allows
the caller to express their fee preference either in blocks to
confirmation, or a direct fee rate. This move takes a small step to
father decoupling calls in the main RPC server.
This commit is a preparation for the addition of new invoice
states. A database migration is not needed because we keep
the same field length and values.
In this commit, we remove the per channel `sigPool` within the
`lnwallet.LightningChannel` struct. With this change, we ensure that as
the number of channels grows, the number of gouroutines idling in the
sigPool stays constant. It's the case that currently on the daemon, most
channels are likely inactive, with only a hand full actually
consistently carrying out channel updates. As a result, this change
should reduce the amount of idle CPU usage, as we have less active
goroutines in select loops.
In order to make this change, the `SigPool` itself has been publicly
exported such that outside callers can make a `SigPool` and pass it into
newly created channels. Since the sig pool now lives outside the
channel, we were also able to do away with the Stop() method on the
channel all together.
Finally, the server is the sub-system that is currently responsible for
managing the `SigPool` within lnd.
Returns a brief json summary of each utxo found by calling
ListUnspentWitness in the wallet. The two arguments are the
minimum and maximum number of conrfirmations (0=include
unconfirmed)
In this commit, we extend the admin macaroon with signer capabilities in
order to allow it to be used with the new signer sub-server. As a
result, users will need to clear out their old macaroons in order to
have the new improved admin macaroon generated. In the future, we may
want to restructure the way the admin macaroon functions: rather than
white listing each of these entities and operations, we can instead add
a catch all capability. This capability will instead allow access to any
call, as each new call would be modified to permit this capabilities and
no others.
In this commit, we modify the existing rpcServer to fully manage the
macaroons, gRPC server, and also seek out and create all sub-servers.
With this change, the RPC server gains more responsibility, as it
becomes the "root" server in the hierarchy of gRPC sub-servers.
In addition to creating each sub-server, it will also merge the set of
macaroon permissions for each sub-server, with the permissions of the
rest of the RPC infra. As a result, each sub-server is able to
independently specify what it needs w.r.t macaroon permissions and have
that taken care of by the RPC server. In order to achieve this, we need
to unify the creation of the RPC interceptors, and also fully manage the
gRPC server ourselves.
Some examples with various build configs:
```
⛰i make build
Building debug lnd and lncli.
go build -v -tags="dev" -o lnd-debug -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty" github.com/lightningnetwork/lnd
go build -v -tags="dev" -o lncli-debug -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty" github.com/lightningnetwork/lnd/cmd/lncli
⛰i ./lnd-debug --debuglevel=debug --signrpc.signermacaroonpath=~/sign.macaroon
unknown flag `signrpc.signermacaroonpath'
unknown flag `signrpc.signermacaroonpath'
⛰i make build tags=signerrpc
Building debug lnd and lncli.
go build -v -tags="dev signerrpc" -o lnd-debug -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty" github.com/lightningnetwork/lnd
go build -v -tags="dev signerrpc" -o lncli-debug -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty" github.com/lightningnetwork/lnd/cmd/lncli
⛰i ./lnd-debug --debuglevel=debug --signrpc.signermacaroonpath=~/sign.macaroon
2018-10-22 17:31:01.132 [INF] LTND: Version: 0.5.0-beta commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty, build=development, logging=default
2018-10-22 17:31:01.133 [INF] LTND: Active chain: Bitcoin (network=simnet)
2018-10-22 17:31:01.140 [INF] CHDB: Checking for schema update: latest_version=6, db_version=6
2018-10-22 17:31:01.236 [INF] LTND: Primary chain is set to: bitcoin
2018-10-22 17:31:02.391 [INF] LNWL: Opened wallet
2018-10-22 17:31:03.315 [INF] LNWL: The wallet has been unlocked without a time limit
2018-10-22 17:31:03.315 [INF] LTND: LightningWallet opened
2018-10-22 17:31:03.319 [INF] LNWL: Catching up block hashes to height 3060, this will take a while...
2018-10-22 17:31:03.320 [INF] HSWC: Restoring in-memory circuit state from disk
2018-10-22 17:31:03.320 [INF] LNWL: Done catching up block hashes
2018-10-22 17:31:03.320 [INF] HSWC: Payment circuits loaded: num_pending=0, num_open=0
2018-10-22 17:31:03.322 [DBG] LTND: Populating dependencies for sub RPC server: Signrpc
```
As for the config, an example is:
```
[signrpc]
signrpc.signermacaroonpath=~/signer.macaroon
```
By passing a pubkey into SendToRoute, it becomes unnecessary for lnd to
query the channel graph to retrieve the hop pubkey. This allows routes
over private channels that are not present in the graph.
In this commit, we ensure that we don't include routing hints for
unadvertised nodes at the time of invoice creation. Otherwise, this
would lead us to leak these unadvertised nodes to anyone who can get
their hands on the invoice being created. To prevent this, we'll now
look at the network graph and ensure that the node in unadvertised if
all of their edges are unadvertised and only extend to us.
In this commit, we address a slight regression in the defaults provided
by the OpenChannel RPC with regards to spending unconfirmed outputs to
fund funding transactions. We now add a new boolean parameter to
OpenChannelRequest: SpendUnconfirmed. If set, we'll use this to
indicate to the server that the funding transaction of the channel to be
created can spend the wallet's unconfirmed outputs to fund it. This
addition is needed because otherwise, if the caller doesn't specify a
MinConfs parameter to the request, then a default of 0 will be used,
which is not ideal.
In this commit the dependency of unmarshallRoute on edge policies being
available is removed. Edge policies may be unknown and reported as nil.
SendToRoute does not need the policies, but it does need pubkeys of the
route hops. In this commit, unmarshallRoute is modified so that it
takes the pubkeys from edgeInfo instead of channelEdgePolicy.
In addition to this, the route structure is simplified. No more connection
to the database at that point. Fees are determined based on incoming and
outgoing amounts.
In this commit, we extend the AbandonChannel RPC method to store as much
information as possible within the CloseSummary. Most importantly, we
store the current and next (if available) revocation of the remote party
along with the channel config for the local party. With this
information, we have enough data to be able to generate a custom signer
for a new commitment state, or to prove that the channel was indeed
ours if needed.
In this commit, we remove the unnecessary NewWitnessAddress RPC. We do
this as, at the moment, we only expose the wallet to generate witness
addresses. Now that the RPC has been removed, its REST endpoint has been
assigned to the NewAddress RPC, which should be the de facto way of
having the wallet generate any type of supported address.
Fixes#1986.
Using AbandonChannel, a channel can be abandoned. This means
removing all state without any on-chain or off-chain action.
A close summary is the only thing that is stored in the db after
abandoning.
A specific close type Abandoned is added. Abandoned channels
can be retrieved via the ClosedChannels RPC.
In a previous commit, we modified our fee rates to be sat/kw internally
as it was possible that the estimated fee rate was not enough to
properly broadcast the transaction. To remedy this, we decided to add a
fee floor, but this would only be enforced when querying the fee
estimator. In this commit, we attempt to do the same thing, but for fee
rates input manually by the user.
The commit ensures that for every channel, there will always
be two entries in the edges bucket. If the policy from one or
both ends of the channel is unknown, it is marked as such.
This allows efficient lookup of incoming edges. This is
required for backwards payment path finding.
In this commit, we explicitly convert sat/vbyte fee rates input by the
user to sat/kw. We do this as users are typically more accustomed to
sat/vbyte fee rates, rather than sat/kw.
In this commit, we fix a slight regression that happened when the
sendtoroute RPC call was implemented. As a result of the refactoring,
the debughtlc mode silently broke. In this commit, we fix this by
checking against the zero hash, rather than the length of the payment
hash, as since we use a fixed sized byte slice, it will always be zero.
- Extend SendRequest and QueryRoutesRequest protos
- newRoute function takes fee limit and cuts off routes that exceed it
- queryRoutes, payInvoice and sendPayment commands take the feeLimit inputs and pass them down to newRoute
- When no feeLimit is included, don't enforce any feeLimits at all (by setting feeLimit to maxValue)
