Commit Graph

1209 Commits

Author SHA1 Message Date
Johan T. Halseth
eaf97418be
lnwallet: check Reserved value on funding request 2021-01-19 10:53:45 +01:00
Johan T. Halseth
3cc31ae841
lnwallet: add CheckReservedValue 2021-01-19 10:53:45 +01:00
Johan T. Halseth
4a4e0c73f7
lnwallet/chanfunding: add Inputs/Outputs to assemblers
This will be used to try to estimate how much the funding transaction
will decrease our wallet balance.
2021-01-19 10:53:45 +01:00
Johan T. Halseth
0fd76e53b8
multi: cap anchors feerate at configurable maximum
This commit caps the update fee the initiator will send when the anchors
channel type is used. We do not limit anything on the receiver side.

10 sat/vbyte is the current default max fee rate we use. This should be
enough to ensure propagation before anchoring down the commitment
transaction.
2020-12-15 19:54:50 +01:00
Johan T. Halseth
1923d40843
lnwallet+funding: enable AnchorsZeroFeeHtlcTx commit type if both nodes support
We assume the legacy anchor type is no longer advertised by us.
2020-12-15 10:13:18 +01:00
Johan T. Halseth
d5cd9861d2
channeldb+lnwallet: define zero-fee channel type 2020-12-15 10:13:07 +01:00
Conner Fromknecht
4af24158c4
Merge pull request #4779 from halseth/anchor-htlc-aggregation
[anchors] HTLC second level aggregation in the sweeper
2020-12-11 16:22:17 -08:00
Conner Fromknecht
0d57ff2432
lnwallet/test: execute ifacet tests for each backend in parallel 2020-12-10 17:42:26 -08:00
Conner Fromknecht
87787ce771
lnwallet: move interface_test.go to it's own package 2020-12-10 17:42:26 -08:00
Conner Fromknecht
1483ed119b
make: use low-scrypt to speed up unit-race
This predominately affects the lnwallet unit tests which are the bulk of
the execution time.
2020-12-10 17:42:26 -08:00
Johan T. Halseth
1e68cdc8cf
input+lnwallet+contractcourt: define SignDetails for HTLC resolutions 2020-12-10 14:24:18 +01:00
Johan T. Halseth
eb8d22e194
lnwallet/channel: properly set SignDesc.Output
Only value was populated for some, which would cause code to rely on the
PkScript being there to fail.
2020-12-10 14:24:18 +01:00
Yong
582b164c46
kvdb: add timeout options for bbolt (#4787)
* mod: bump btcwallet version to accept db timeout

* btcwallet: add DBTimeOut in config

* kvdb: add database timeout option for bbolt

This commit adds a DBTimeout option in bbolt config. The relevant
functions walletdb.Open/Create are updated to use this config. In
addition, the bolt compacter also applies the new timeout option.

* channeldb: add DBTimeout in db options

This commit adds the DBTimeout option for channeldb. A new unit
test file is created to test the default options. In addition,
the params used in kvdb.Create inside channeldb_test is updated
with a DefaultDBTimeout value.

* contractcourt+routing: use DBTimeout in kvdb

This commit touches multiple test files in contractcourt and routing.
The call of function kvdb.Create and kvdb.Open are now updated with
the new param DBTimeout, using the default value kvdb.DefaultDBTimeout.

* lncfg: add DBTimeout option in db config

The DBTimeout option is added to db config. A new unit test is
added to check the default DB config is created as expected.

* migration: add DBTimeout param in kvdb.Create/kvdb.Open

* keychain: update tests to use DBTimeout param

* htlcswitch+chainreg: add DBTimeout option

* macaroons: support DBTimeout config in creation

This commit adds the DBTimeout during the creation of macaroons.db.
The usage of kvdb.Create and kvdb.Open in its tests are updated with
a timeout value using kvdb.DefaultDBTimeout.

* walletunlocker: add dbTimeout option in UnlockerService

This commit adds a new param, dbTimeout, during the creation of
UnlockerService. This param is then passed to wallet.NewLoader
inside various service calls, specifying a timeout value to be
used when opening the bbolt. In addition, the macaroonService
is also called with this dbTimeout param.

* watchtower/wtdb: add dbTimeout param during creation

This commit adds the dbTimeout param for the creation of both
watchtower.db and wtclient.db.

* multi: add db timeout param for walletdb.Create

This commit adds the db timeout param for the function call
walletdb.Create. It touches only the test files found in chainntnfs,
lnwallet, and routing.

* lnd: pass DBTimeout config to relevant services

This commit enables lnd to pass the DBTimeout config to the following
services/config/functions,
  - chainControlConfig
  - walletunlocker
  - wallet.NewLoader
  - macaroons
  - watchtower
In addition, the usage of wallet.Create is updated too.

* sample-config: add dbtimeout option
2020-12-07 15:31:49 -08:00
Conner Fromknecht
daf7c8a854
Merge pull request #4780 from halseth/chainwatcher-force-close-future-state
chainwatcher: properly derive to_local script for "future" local force closes
2020-12-03 16:21:50 -08:00
Oliver Gugger
2edc3cf98f
multi: update to latest btcd version
With this commit we update btcd to the latest version which allows us to
specify the btcd binary we want to use when spinning up a new node.
2020-12-03 11:30:22 +01:00
Johan T. Halseth
2a7a34ae10
contractcourt+lnwallet: use state num instead of commit height when
outdated local state

This commit fixes a bug that would cause us to not sweep our local
output in case we force closed, then lost state or attempted recovery.
The reason being that we would use or local commit height when deriving
our scripts, which would be incorrect. Instead we use the extracted
state number to derive the correct scripts, allowing us to sweep the
output.

Allthough being an unlikely scenario, we would leave money on chain in
this case without any warning (since we would just end up with an empty
delay script) and forget about the spend.
2020-12-03 08:01:08 +01:00
Johan T. Halseth
18f79e20d5
lnwallet/test_utils: set up asymmetric commits
The remote and local commits are not symmetric, so we correctly set them
up pointing to the correct commitment tx.
2020-12-03 08:00:01 +01:00
Federico Bond
10d94f99c0
multi: move several wait group done calls to defer statements 2020-11-23 14:48:44 +01:00
Johan T. Halseth
953443e10c
lnwallet/channel: correct dust calculation on incoming HTLC
Similar to the previous commit, we fix a bug resulting in the wrong
commit weight being calculated when an HTLC just above the remote's
duslimit was added from the remote. This was a result of using the
successFee instead of the timeoutFee when checking whether it was dust,
making us consider it dust when it shouldn't have been.
2020-11-13 12:02:03 +01:00
Johan T. Halseth
e0b133297d
lnwallet/channel: correct dust calculation on outgoing HTLC
In this commit we fix a bug resulting in the wrong commit weight being
calculated when an HTLC just below the remote's duslimit was added. This
was a result of using the timeoutFee instead of the successFee when
checking whether it was dust, making us consider it non-dust when it
should have been.
2020-11-13 11:58:52 +01:00
carla
0d35ce7561
mutli: move parse upfront shutdown out of rpcserver 2020-11-10 11:40:52 +02:00
Carla Kirk-Cohen
a0ab96de5d
Merge pull request #4735 from carlaKC/2426-defaultmaxcsv
multi: add control over maximum acceptable local CSV delay
2020-11-05 12:39:35 +02:00
Bjarne Magnussen
0e2d6dc0a9
chanfunding: match error string when testing CoinSelectSubtractFees 2020-11-04 18:54:57 +01:00
Bjarne Magnussen
493bc27ec2
chanfunding: fix tiny typo 2020-11-04 18:54:57 +01:00
Bjarne Magnussen
c56457c869
chanfunding: add test for a non-zero change 2020-11-04 18:54:57 +01:00
Bjarne Magnussen
07549d50ff
chanfunding: assure logic for high-fee
Without this change the high-fee logic is never tested as it is instead caught by the dust-output logic. This change uses a higher fee rate to ensure an output value above the dust limit, while still spending 20% on fees.
2020-11-04 18:54:57 +01:00
Bjarne Magnussen
9e825e6c0f
chanfunding: assure logic for dust output
Without this change the fee for the test case is above 20% and hence the error could be caught by the high-fee logic instead.
2020-11-04 18:54:57 +01:00
carla
f4136decae
multi: add max local csv config option
To allow nodes more control over the amount of time that their funds
will be locked up, we add a MaxLocalCSVDelay option which sets the
maximum csv delay we will accept for all channels. We default to the
existing constant of 10000, and set a sane minimum on this value so that
clients cannot set unreasonably low maximum csv delays which will result
in their node rejecting all channels.
2020-11-04 13:55:37 +02:00
Wilmer Paulino
1ad0dbade9
btcwallet: return chain best timestamp while backend is syncing
A while back, changes were made to the wallet such that it waits for the
backend to be synced before beginning to store the latest 10,000 blocks
of the chain. This inherently broke sync progress implementations based
on the best_header_timestamp result from the GetInfo RPC for
neutrino-based nodes as the wallet is no longer tracking all blocks in
the chain. To work around this, we now make sure to return the backend's
best header timestamp instead of the wallet's, allowing said sync
progress implementations to work again.
2020-10-19 13:57:30 -07:00
Oliver Gugger
f947576f33
lnwallet+mock: add new PSBT methods 2020-10-03 10:34:39 +02:00
Oliver Gugger
9f5f98e736
btcwallet: use new base wallet methods 2020-10-03 10:34:39 +02:00
Oliver Gugger
936a83858b
chanfunding: use util functions from psbt package 2020-10-03 10:34:39 +02:00
Tom Kirkpatrick
73a5f325b6
lnrpc: ability to spend unconfirmed coins 2020-10-01 13:27:03 +01:00
Joost Jager
29602e88e8
cnct: cpfp-sweep anchors
For unconfirmed commit tx anchors, supply the sweeper with cpfp info and
a confirmation target fee estimate.

The sweeper will try to pay for the parent commit tx as long as the
current fee estimate exceeds the pre-signed commit tx fee rate.
2020-09-17 12:30:41 +02:00
Joost Jager
2ebfb64b9b
Merge pull request #4606 from joostjager/cpfp-sweep-prep
cnct+sweep+itest: preparations for cpfp-aware sweeper
2020-09-16 11:48:39 +02:00
Olaoluwa Osuntokun
fa342a1230
Merge pull request #4567 from calvinrzachman/max-wumbo
add new max channel size config option
2020-09-15 15:31:47 -07:00
Oliver Gugger
5375f88b55
lnwallet+rpcserver: allow final raw tx to be specified
With this commit we allow the final transaction of a PSBT funding flow
to also be specified as a raw wire format transaction.
2020-09-15 08:30:23 +02:00
Oliver Gugger
1c832cbce7
chanfunding: verify inputs are signed in raw tx 2020-09-15 08:30:22 +02:00
Oliver Gugger
d581cd02fc
chanfunding: extract FinalizeRawTX into own method
As a preparation to also allow the final TX to be specified in the raw
wire format, we extract the check of the final transaction into its own
method.
2020-09-15 08:30:22 +02:00
Calvin Zachman
f5fb64e552 add new max channel size config option
- let users specify their MAXIMUM WUMBO with new config option which sets the maximum channel size lnd will accept
- current implementation is a simple check by the fundingManager rather than anything to do with the ChannelAcceptor
- Add test cases which verify that maximum channel limit is respected for wumbo/non-wumbo channels
- use --maxchansize 0 value to distinguish set/unset config. If user sets max value to 0 it will not do anything as 0 is currently used to indicate to the funding manager that the limit should not be enforced. This seems justifiable since --maxchansize=0 doesn't seem to make sense at first glance.
- add integration test case to ensure that config parsing and valiation is proper. I simplified the funding managers check electing to rely on config.go to correctly parse and set up either i) non wumbo default limit of 0.16 BTC OR ii) wumbo default soft limit of 10 BTC

Addresses: https://github.com/lightningnetwork/lnd/issues/4557
2020-09-14 21:16:32 -05:00
Joost Jager
166be979dd
lnwallet: add no cache option to web api estimator 2020-09-14 11:51:03 +02:00
Joost Jager
23cd2f40eb
lnwallet: remove unused WebAPIEstimator field 2020-09-14 11:51:01 +02:00
Johan T. Halseth
a48c369250
lnwallet: check coop close fee negative balance
Also modify the test to check for this condition.
2020-09-11 11:10:58 +02:00
Johan T. Halseth
09a126b29f
lnwallet: add anchor size back to balance on coop close
To be spec compliant, we require the initiator to not pay the anchor
values into fees on coop close. We extract the balance calculation into
commitment.go, and add back the value of the anchors to the initiator's
balance.
2020-09-11 11:10:58 +02:00
Johan T. Halseth
07a57ae778
lnwallet: extract coop close balance calc into method 2020-09-11 11:10:58 +02:00
eugene
62e19185f1 htlcswitch+channeldb: single tx for removing fwdpkgs
This commit changes RemoveFwdPkg to RemoveFwdPkgs so that a single
tx is used instead of N where N is the number of fwd pkgs to remove.
2020-08-31 20:52:51 -04:00
Oliver Gugger
f2e0ed19ff
lnwallet+fundingmgr: ignore shim channels in pending count
Externally funded channels are expected by the user and explicitly
registered through the use of a funding shim and should therefore not
count towards the max pending channel count which is primarily there to
mitigate DoS attacks.
2020-08-28 12:28:43 +02:00
Wilmer Paulino
a85c4feb17
btcwallet: skip unsupported addresses in ListTransasctionDetails
A transaction with an unsupported address would prevent the method from
returning any other transactions and would instead return an error.
2020-08-25 11:21:29 -07:00
Conner Fromknecht
fd3f7ca6c8
Merge pull request #4434 from carlaKC/labels-general
multi: add labels to lnd native transactions
2020-08-20 12:58:04 -07:00
Joost Jager
f7d85555a4
lnwallet/test: add anchor vector for no local anchor 2020-08-19 08:44:04 +02:00