Commit Graph
7123 Commits
Author SHA1 Message Date
Olaoluwa Osuntokun ea7bae8492 contractcourt: remove the now unused chain actions methods
We still keep the `actionsBucketKey` variable around so current
contracts will clean up the existing state once they've been fully
resolved.
2019-05-27 15:26:41 -07:00
Olaoluwa Osuntokun 087e22d817 contractcourt: obtain supplementary HTLC info from the htlcSets
Since we no longer have up to date chain actions on disk, we'll use the
HTLC sets in memory which contain the necessary information we need to
in order to obtain the HTLC amounts.
2019-05-27 15:26:40 -07:00
Olaoluwa Osuntokun 8a34b1ae88 contractcourt: only send resolution messages if we have any to send 2019-05-27 15:26:39 -07:00
Olaoluwa Osuntokun 877b8c55d3 contractcourt: stop writing chain actions to disk
We don't need them as we'll just reconstruct the chain actions once a
commitment has actually confirmed.
2019-05-27 15:26:38 -07:00
Olaoluwa Osuntokun fb91f0be70 contractcourt: reconstruct chain actions at time of commitment confirmation
In this commit, we change the behavior of the channel arb to no longer
write chain actions to disk. Instead, using the new CommitSet struct,
we'll replay our set of prior actions based on what actually got into
the chain. As a result, we no longer need to write the chain actions at
all, instead they're reconstructed at run time to determine decisions,
and before any commitments are broadcast in order to determine if we
need to go to chain at all.
2019-05-27 15:26:37 -07:00
Olaoluwa Osuntokun fc617cd041 contractcourt: add new checkLocalChainActions method use in main state step
In this commit, we add a new `checkLocalChainActions` method. This
method differs from the existing `checkChainActions` method in that it's
only concerned with actions we should take on chain for our local state
based on the local _and_ remote state. This change ensures that we'll
now to go to chain order to cancel an HTLC that was on the remote
party's commitment transaction, but not our own.
2019-05-27 15:26:36 -07:00
Olaoluwa Osuntokun 5f0fad85be multi: address lingering TODO by no longer wiping out local HTLCs on remote close
In this commit, we fix a lingering TOOD statement in the channel arb.
Before this commitment, we would simply wipe our our local HTLC set of
the HTLC set that was on the remote commitment transaction on force
close. This was incorrect as if our commitment transaction had an HTLC
that the remote commitment didn't, then we would fail to cancel that
back, and cause both channels to time out on chain.

In order to remedy this, we introduce a new `HtlcSetKey` struct to track
all 3 possible in-flight set of HTLCs: ours, theirs, and their pending.

We also we start to tack on additional data to all the unilateral close
messages we send to subscribers. This new data is the CommitSet, or the
set of valid commitments at channel closure time. This new information
will be used by the channel arb in an upcoming commit to ensure it will
cancel back HTLCs in the case of split commitment state.

Finally, we start to thread through an optional *CommitSet to the
advanceState method. This additional information will give the channel
arb addition information it needs to ensure it properly cancels back
HTLCs that are about to time out or may time out depending on which
commitment is played.

Within the htlcswitch pakage, we modify the `SignNextCommitment` method
to return the new set of pending HTLCs for the remote party's commitment
transaction and `ReceiveRevocation` to return the latest set of
commitment transactions on the remote party's commitment as well. This
is a preparatory change which is part of a larger change to address a
lingering TODO in the cnct.

Additionally, rather than just send of the set of HTLCs after the we
revoke, we'll also send of the set of HTLCs after the remote party
revokes, and we create a pending commitment state for it.
2019-05-27 14:34:13 -07:00
Johan T. Halseth 6e102d64b9 Merge pull request #3101 from AdamISZ/make-unit-cover-pkg
Allow unit-cover target for make to filter by package
2019-05-27 13:18:45 +02:00
Olaoluwa Osuntokun 6e3b92b55f Merge pull request #3106 from cfromknecht/wtclient-db
watchtower/wtdb: add bbolt-backed ClientDB
2019-05-24 18:53:00 -07:00
Conner Fromknecht 28bf49807e watchtower/wtdb: add CSessionStatus field to ClientSession
This commit adds persisted status bit-field to ClientSessions, that can
be used to modify behavior of their handling in the client. Currently,
only a default CSessionActive status is defined. However, the intention
is that this could later be used to signal that a session is abandoned
without needing to perform a db migration to add the field. As we move
forward with testing, this will likely be useful if a session gets
borked and we need a simple method of the client to temporarily ignore
certain sessions.

The field may be useful in signaling other types of status changes,
though this was the primary motivation that warranted the addition.
2019-05-24 18:24:41 -07:00
Conner Fromknecht 9157c88f93 watchtower/wtclient: dedup backups across restarts
Now that the committed and acked updates are persisted across restarts,
we will use them to filter out duplicate commit heights presented by the
client.
2019-05-24 18:24:41 -07:00
Conner Fromknecht 3be651b0b3 watchtower/wtdb: add ClientDB
This commit adds the full bbolt-backed client database as well as a set
of unit tests to assert that it exactly implements the same behavior as
the mock ClientDB.
2019-05-24 18:24:41 -07:00
Olaoluwa Osuntokun eba989048c Merge pull request #3117 from halseth/update-neutrino-dep
[dependency update]: update to latest neutrino dep
2019-05-24 13:02:06 -07:00
AdamISZ 9b3676fdd4 Allow unit-cover target for make to filter by package
Previous to this commit, running `make unit-cover pkg=xx`
would ignore the selected package and run unit tests and
coverage for all packages.
After this commit, the package selected with pkg= is the
only one that is tested and coverage output generated for.
If no pkg is selected, the default is as before, all pkgs.
2019-05-24 12:51:35 +02:00
Johan T. Halseth ea50502a79 go mod: update to latest neutrino dep 2019-05-24 12:41:31 +02:00
Johan T. Halseth af3b04e53f Merge pull request #3103 from halseth/syncmanager-resync-historical
discovery/sync_manager: restart historical sync on first connected peer
2019-05-24 12:17:02 +02:00
Johan T. Halseth 6ba6982ae7 discovery/sync_manager_test: add TestSyncManagerHistoricalSyncOnReconnect
TestSyncManagerHistoricalSyncOnReconnect tests that the sync manager will
re-trigger a historical sync when a new peer connects after a historical
sync has completed, but we have lost all peers.
2019-05-24 11:05:30 +02:00
Johan T. Halseth 526486ae24 discovery/sync_manager: restart historical sync on first connected peer
To handle the case where we have been without peers, and get a new
connection, we reset the historical scan booleans when the first active
syncer is connected to trigger another historical sync.
2019-05-24 11:05:29 +02:00
Conner Fromknecht b35a5b8892 watchtower/wtclient: integrate ClientChannelSummaries
In this commit, we utilize the more generic ClientChanSummary instead of
exposing methods that only allow us to set and fetch sweep pkscripts.
2019-05-23 20:48:50 -07:00
Conner Fromknecht 25fc464a6e watchtower/wtdb/client_chan_summary: add ClientChanSummary
A ClientChanSummary will be inserted for each channel registered with
the client, which for now will just track the sweep pkscript to use. In
the future, this will be extended with additional information to enable
the client to efficiently compute which historical states need to be
backed up under a given policy.
2019-05-23 20:48:36 -07:00
Conner Fromknecht 440ae7818a watchtower/wtmock/client_db: adjust mock clientdb behavior
In advance of the upcoming wtdb.ClientDB, we'll modify the behavior
of the mockdb to be more like the final bbolt backed one, and assert
that all or our tests are still passing.
2019-05-23 20:48:23 -07:00
Conner Fromknecht 2a904cb69f watchtower/wtdb: add Encode/Decode methods to wtclient structs 2019-05-23 20:48:08 -07:00
Conner Fromknecht 1db9bf2fd4 watchtower/wtdb: create embedded ClientSessionBody
This commit splits out the portions of the ClientSession into an
embedded ClientSessionBody, since these fields will be serialized
together on-disk.
2019-05-23 20:47:49 -07:00
Conner Fromknecht 5ad9530502 watchtower/wtdb: return sorted ClientSession.CommittedUpdates
This commit replaces the map-based CommittedUpdates field with a slice.
When reading from disk, these will already be sorted by bbolt, so the
client restore the updates as presented without needing to sort them
first.

Since the key in the map variant was the sequence number, we refactor
the CommittedUpdate struct to have a sequence number and an embedded
CommittedUpdateBody (which is equivalent to the old CommittedUpdate).
The database is then expected to populate the sequence number from the
key on disk.

Since the sequence number is now directly integrated in the
CommittedUpdate struct, this allow allows us to remove the now redundant
seqNum argument from CommitUpdate.
2019-05-23 20:47:36 -07:00
Conner Fromknecht 3509c0c991 watchtower/multi: use proper TowerID type
This allows serialization methods to be added with TowerID method
receivers.
2019-05-23 20:47:22 -07:00
Conner Fromknecht ec7c16fdc1 watchtower/wtdb: prepare for addition of client db
This commit renames the variables dbName to towerDBName and dbVersions
to towerDBVersions, to distinguish between the upcoming clientDBName
clientDBVersions. We also move resusable portions of the database
initialization and default endianness to its own file so that it can be
shared between both tower and client databases.
2019-05-23 20:47:08 -07:00
Wilmer Paulino 6e0084fec9 Merge pull request #3075 from cfromknecht/crtr-nil-path-curves
routing/router: nil path pubkeys before spewing
2019-05-23 20:01:54 -07:00
Olaoluwa Osuntokun 50f0ac5683 Merge pull request #2308 from chokoboko/channels-in-getnodeinfo
rpcserver: add channels to GetNodeInfo response
2019-05-23 18:01:12 -07:00
chokoboko 51dc422721 rpcserver: add channels to GetNodeInfo response 2019-05-23 16:03:39 +03:00
Johan T. Halseth 6cd71b7f7a Merge pull request #2312 from xsb/color-node-update
rpc: add node color to NodeUpdate and GetInfo
2019-05-23 14:21:05 +02:00
Xavi Soler 0e38c722b3 lncli: include color in getinfo response 2019-05-23 10:52:22 +02:00
Xavi Soler f4f3cea9a6 rpcserver: include color to getinfo and topology update 2019-05-23 10:52:18 +02:00
Xavi Soler 28021361d1 routing: add color to node update 2019-05-23 10:52:12 +02:00
Xavi Soler ee2e49141e lnrpc: add color to GetInfoResponse and NodeUpdate 2019-05-23 10:51:59 +02:00
Olaoluwa Osuntokun 063ecedf3a Merge pull request #3082 from joostjager/upgrade-gen-go
lnrpc: upgrade to protobuf v1.3.1
2019-05-22 21:10:26 -07:00
Olaoluwa Osuntokun 649b5208a6 Merge pull request #3111 from cfromknecht/fix-bitcoind-initial-install
scripts/install_bitcoind: fix initial install
2019-05-22 20:06:49 -07:00
Conner Fromknecht b34150144d scripts/install_bitcoind: fix initial install 2019-05-22 19:21:24 -07:00
Olaoluwa Osuntokun c654b829f4 Merge pull request #3104 from wpaulino/lncli-create-restore-backup
cmd/lncli: properly parse channel backup within lncli create
2019-05-22 17:12:25 -07:00
Olaoluwa Osuntokun 0afc70ec67 Merge pull request #3108 from cfromknecht/build-bitcoind-0.17
travis: install bitcoind 0.17.1 binaries manually
2019-05-22 16:58:11 -07:00
Conner Fromknecht 98f8696e68 travis: install bitcoind 0.17.1 binaries 2019-05-22 16:35:46 -07:00
Johan T. Halseth 4806003b74 Merge pull request #2704 from MDrollette/multiple-opts
config: allow adding multiple tls ips and domains
2019-05-22 08:59:19 +02:00
Johan T. Halseth 437f83998e Merge pull request #3098 from cfromknecht/increase-funding-timeout
fundingmanager: bump max non-initiator funding timeout to 2 weeks
2019-05-22 08:46:54 +02:00
Wilmer Paulino 92d780f157 cmd/lncli: properly parse channel backup within lncli create 2019-05-21 15:16:44 -07:00
Johan T. Halseth 339080394d Merge pull request #3096 from grunch/add-minchansize-to-sample-conf
Add minchansize to sample config file
2019-05-21 09:52:03 +02:00
Olaoluwa Osuntokun 57715b5192 Merge pull request #3093 from wpaulino/lncli-openchannel-unconfirmed
cmd/lncli: properly spend unconfirmed utxos with openchannel
2019-05-20 18:07:04 -07:00
Joost Jager 9a4c0d5699 lnrpc: upgrade to protobuf v1.3.1
This commit upgrades the protobuf version. Compared to the previous
v1.2.0 it generates smaller diffs in generated code. This change was
introduced in:

https://github.com/golang/protobuf/commit/fffb0f78287ac709b1395be9708df0b579a385f7
2019-05-20 15:35:14 +02:00
Johan T. Halseth 777f1b7b23 Merge pull request #3076 from sangaman/proto-typos
lnrpc: fix typos
2019-05-20 15:00:55 +02:00
Johan T. Halseth 2c1c29e060 Merge pull request #3081 from halseth/route-remove-totalfees
routing/route+multi: remove redundant TotalFees field
2019-05-20 15:00:01 +02:00
Johan T. Halseth 60bad9a4e5 Merge pull request #2974 from OpinionatedGeek/patch-1
Build LND subservers when building docker image
2019-05-20 14:40:53 +02:00
Conner Fromknecht 08654786ad fundingmanager: bump max non-initiator funding timeout to 2 weeks
The previous value was set to two days, which may not be enough to
handle large fee spikes where users still which to submit channels with
a low fee and don't mind lowering their time preference. Since the
timeout is only applied to channels that we don't initiate, there's real
downside since it's not our funds that are locked up.
2019-05-18 15:21:56 -07:00