Commit Graph

99 Commits

Author SHA1 Message Date
Conner Fromknecht
14a06526b8 routing/notifs: order invariant testing of ntfn delivery (#238)
Modifies the test cases in `TestEdgeUpdateNotification` and
`TestNodeUpdateNotification` to check for the possibility of notifications
being delivered out of order.  This addresses some sporadic failures that
were observed when running the test suite. 

I looked through some of the open issues but didn't see any addressing this
issue in particular, but if someone could point me to any relevant issues
that would be much appreciated!

Issue
-----
Currently the test suite validates notifications received in the order they
are submitted. The check fails because the verification of each
notification is statically linked to the order in which they are delivered,
seen
[here](1be4d67ce4/routing/notifications_test.go (L403))
and
[here](1be4d67ce4/routing/notifications_test.go (L499))
in `routing/notifications_test.go`.  The notifications are typically
delivered in this order, but causes the test to fail otherwise.

Proposed Changes
-------------------
Construct an index that maps a public key to its corresponding edges and/or
nodes.  When a notification is received, use its identifying public key and
the index to look up the edge/node to use for validation. Entries are
removed from the index after they are verified to ensure that the same
entry is validated twice. The logic to dynamically handle the verification
of incoming notifications rests can be found here
[here](https://github.com/cfromknecht/lnd/blob/order-invariant-ntfns/routing/notifications_test.go#L420)
and
[here](https://github.com/cfromknecht/lnd/blob/order-invariant-ntfns/routing/notifications_test.go#L539).

Encountered Errors
--------------------
 * `TestEdgeUpdateNotification`: notifications_test.go:379: min HTLC of
   edge doesn't match: expected 16.7401473 BTC, got 19.4852751 BTC
 * `TestNodeUpdateNotification`: notifications_test.go:485: node identity
   keys don't match: expected
   027b139b2153ac5f3c83c2022e58b3219297d0fb3170739ee6391cddf2e06fe3e7, got
   03921deafb61ee13d18e9d96c3ecd9e572e59c8dbd0bb922b5b6ac609d10fe4ee4


Recreating Failing Behavior
---------------------------
The failures can be somewhat difficult to recreate, I was able to reproduce
them by running the unit tests repeatedly until they showed up.  I used the
following commands to bring them out of hiding:

```
./gotest.sh -i
go test -test.v ./routing && while [ $? -eq 0 ]; do go test -test.v ./routing; done
```

I was unable to recreate these errors, or any others in this package, after
making the proposed changes and leaving the script running continuously for
~30 minutes. Previously, I could consistently generate an error after ~20
seconds had elapsed on the latest commit in master at the time of writing:
78f6caf5d2e570fea0e5c05cc440cb7395a99c1d. Moar stability ftw!
2017-07-31 21:38:03 -07:00
Andrey Samokhvalov
2d378b3280 htlcswitch+router: add onion error obfuscation
Within the network, it's important that when an HTLC forwarding failure
occurs, the recipient is notified in a timely manner in order to ensure
that errors are graceful and not unknown. For that reason with
accordance to BOLT №4 onion failure obfuscation have been added.
2017-07-14 19:08:04 -07:00
Olaoluwa Osuntokun
9daa659bb3
routing/chainview: convert chainview integration tests to use sub-tests 2017-07-04 15:53:58 -07:00
Andrey Samokhvalov
8fa2b95c12 lnd: remove seelog logger
The btclog package has been changed to defining its own logging
interface (rather than seelog's) and provides a default implementation
for callers to use.

There are two primary advantages to the new logger implementation.

First, all log messages are created before the call returns.  Compared
to seelog, this prevents data races when mutable variables are logged.

Second, the new logger does not implement any kind of artifical rate
limiting (what seelog refers to as "adaptive logging").  Log messages
are outputted as soon as possible and the application will appear to
perform much better when watching standard output.

Because log rotation is not a feature of the btclog logging
implementation, it is handled by the main package by importing a file
rotation package that provides an io.Reader interface for creating
output to a rotating file output.  The rotator has been configured
with the same defaults that btcd previously used in the seelog config
(10MB file limits with maximum of 3 rolls) but now compresses newly
created roll files.  Due to the high compressibility of log text, the
compressed files typically reduce to around 15-30% of the original
10MB file.
2017-06-25 14:19:56 +01:00
Olaoluwa Osuntokun
9b9f419e51
routing: fix vet error, ensure wait group in topologyClient isn't copied 2017-06-25 13:48:52 +01:00
Olaoluwa Osuntokun
5c45d52ab6
routing: wait for topology clients to fully exit before closing ntfn chan
This commit fixes a send on closed channel panic by adding additional
synchronization when cancelling the notifications for a particular
topology client. We now ensure that all goroutines belonging to a
particular topology client exit fully before we close the notification
channel in order to avoid a panic.
2017-06-25 13:31:55 +01:00
Olaoluwa Osuntokun
1be4d67ce4
multi: run all test instances in parallel 2017-06-17 01:00:07 +02:00
Olaoluwa Osuntokun
2452f2ed82
routing: update test to assert correctness of per-hop payloads 2017-06-16 22:45:30 +02:00
Olaoluwa Osuntokun
fca51d6165
routing: use converted hop payloads for sphinx packet when creating onion 2017-06-16 22:43:00 +02:00
Olaoluwa Osuntokun
4d8bb21d9d
routing: add ToHopPayloads method to routing.Route
This commit adds a new method to the routing.Route struct:
ToHopPayloads. This function will converts a complete route into the
series of per-hop payloads that is to be encoded within each HTLC using
an opaque Sphinx packet.

We can now use this function when creating the sphinx packet to
properly encoded the hop payload for each hop in the route.
2017-06-16 22:37:47 +02:00
Olaoluwa Osuntokun
dfd37df0ed
routing: set expiry on initial outgoing HTLC using total time lock 2017-06-16 22:35:14 +02:00
Olaoluwa Osuntokun
62cd6ee046
routing: populate the OutgoingTimeLock field within route hops
This commit inches towards fully validation+adherance of the per-hop
payloads within an HTLC’s route by properly calculating the outgoing
time lock value for each hop according to the current draft
specification.
2017-06-16 22:33:59 +02:00
Olaoluwa Osuntokun
e4563ca13b
routing/chainview: make filter updates synchronous for neutrino
This commit fixes a possible race condition wherein a call to
FilterBlock after a call to UpdateFilter would result in the call to
FilterBlock not yet using the updated filter. We fix this by ensuring
the internal chain filter is updated by the time the call to
FilterBlock returns.
2017-06-09 12:18:33 -07:00
Olaoluwa Osuntokun
0c134a8cb3
routing/chainview: if the chain filter is empty, don't fetch the cfilter 2017-06-08 23:11:24 -07:00
Olaoluwa Osuntokun
38beeebe3d
routing/chainview: optimize neutrino implementation of FilterBlock
This commit optimizes the neutrino implementation of FilterBlock method
of the ChainView interface. The old implementation would _always_ fetch
the entire block and manually scan through it. Instead, we can just
fetch the filter, and then if the items match, fetch the block itself.
This will save bandwidth during a lnd node’s pruning of the channel
graph after a period of dormancy.
2017-06-08 22:24:03 -07:00
Olaoluwa Osuntokun
7d30634757
routing/chainview: fix race condition in neutrino implementation 2017-06-06 12:01:24 -07:00
Olaoluwa Osuntokun
9fd70958f4
multi: fix linter errors 2017-06-05 19:45:01 -07:00
Olaoluwa Osuntokun
cbf7cd48f5
multi: update to latest neutrino API changes 2017-06-05 19:41:07 -07:00
Olaoluwa Osuntokun
8f81133d6c
chainntnfs/neutrinonotify: add ChainNotifier implementation for neutrino
This commit adds an initial rough implementation father ChainNotifier
interface for neutrino, our new light client implementation. This
implementation largely borrows from the existing BtcdNotifier
implementation. As a result, a follow up commit will perform two
refactoring in order to further consolidate code.
2017-06-05 19:04:56 -07:00
Olaoluwa Osuntokun
48ea8a3e70
routing/chainview: add neutrino light client to set of interface tests 2017-06-05 18:58:53 -07:00
Olaoluwa Osuntokun
cc25049684
routing/chainview: add new light client p2p version of FilteredChainView
This commit adds a new implementation of the FilteredChainView
interface. This implementation speaks purely to the p2p network and is
backed by a new experimental light client implementation.
2017-06-05 18:57:36 -07:00
Olaoluwa Osuntokun
461d84dd75
routing/chainview: report line # in test failures, bump up timeouts 2017-06-05 18:54:58 -07:00
bryanvu
4ac7cc719f lnwallet: replace hard-coded fees and adjust tests accordingly
This commit replaces the hard-coded 5000 satoshi fees with calls to the
FeeEstimator interface. This should provide a way to cleanly plug in
additional fee calculation algorithms in the future. This change
affected quite a few tests. When possible, the tests were changed to
assert amounts sent rather than balances so that fees wouldn't need to
be taken into account. There were several tests for which this wasn't
possible, so calls to the static fee calculator were made.
2017-05-15 20:26:11 -07:00
Olaoluwa Osuntokun
a4ba72c08c
routing: close exit chan before ntfnChan to cancel topology clients
This commit fixes a panic due to a send on a closed channel that could
possibly occur depending on the order of channel closes when a client
goes to cancel a topology notification client.

Previously we closed the ntfnChan first, this would possible result in
a panic as the goroutine may have succeeded on a send at the same time
the channel was closed. Instead, we now close the `exit` channel first
which is meant to be a signal to the goroutine that the client has been
canceled.
2017-05-15 18:47:26 -07:00
Olaoluwa Osuntokun
bfc869739d
routing: fix linter error 2017-05-15 18:21:13 -07:00
Olaoluwa Osuntokun
40a7523b8f
routing: fix incorrect logging fmt directive, log chanPoint for undo fetch failure 2017-05-15 18:20:49 -07:00
Olaoluwa Osuntokun
cc19695dad
routing: reject channel announcement if connected vertexes are unknown
This commit modifies the processing in the routing package eo new
announcements. Previously,  if we cgot a cnew channel announcement but
didn’t yet know of the verses that the chanell connected, the
cnnounacment would be accepted. This behavior was eronoues as if the
channel were to be queried for, the DB query would fail as we would be
unable to retrieve the two nodes involved int he channel.

To avoid such an error case, we will now _reject_ any channel
announcements in which we don’t yet have a valid node announcement for
the connected nodes. This case has been inserted into the handling of
channel announcement, a new test has been added, and finally older
tests have also been updated to ensure that nodes are added to the
database _before_ the edge is.
2017-05-14 19:27:24 -07:00
Olaoluwa Osuntokun
31cb1cb65b
routing/chainview: linter fixes 2017-05-11 15:36:47 -07:00
Olaoluwa Osuntokun
828d28581a
routing: abandon ChainNotifier for FilteredChainView
This commit modifies the routing package to no longer use the
ChainNotifier for pruning the channel graph. Instead, we now use the
FilteredChainView interface to more (from the ChannelRouter’s PoV)
efficiently maintain the channel graph.

Rather than scanning the _entire_ block manually, we now rely on the
FilteredChainView to provide us with FilteredBlocks which include
_only_ the relevant transactions that we care about.
2017-05-11 15:20:48 -07:00
Olaoluwa Osuntokun
2ec0f5788e
routing/chainview: add behavioral interface level tests
This commit adds a new set of behavioral interface level tests to the
chain view package. This set of tests can now be used in order to check
proper conformity to this “specification” for all future
implementations of the chain view package.
2017-05-11 15:20:45 -07:00
Olaoluwa Osuntokun
7a42e31a44
routing/chainview: add btcd-websockets impl of FilteredChainView
This commit adds the first concrete implementation of the
chainview.FilteredChainView interface. The implementation of this
interface, BtcdFilteredChainView is backed by a web sockets connection
to an active btcd instance.
2017-05-11 15:20:43 -07:00
Olaoluwa Osuntokun
7bdd7023f4
routing/chainview: add new chainview package for watching subsets of the UTXO set
This commit creates a new package as sub-package within the routing
package: chainview. This package is centered around a single interface
definition: the FilteredChainView. This interface is to be used to
allow the routing package to watch a _subset_ of the UTXO set for any
modifications. In the case of LN, the subset of the UTXO set that we
care about is the set of currently opened channels.

In a future commit the routing package will be modified to remove the
current full block scanning with processing of FilteredBlock
notification, and proper updates to the filter as observed by the
FilteredChainView.
2017-05-11 15:20:41 -07:00
Olaoluwa Osuntokun
a0c2278a69
routing: add TODO in newRoute for more sanity checks 2017-04-16 15:24:17 -07:00
Olaoluwa Osuntokun
1bb225a9bd
routing: print proper error msg on payment send fail 2017-04-14 17:12:04 -07:00
Olaoluwa Osuntokun
79807022a5
routing: update graph traversal to use latest API 2017-04-14 13:15:00 -07:00
Olaoluwa Osuntokun
c8bf521c75
routing: display channel capacity in info logging message 2017-04-14 11:48:09 -07:00
Olaoluwa Osuntokun
5442e42cc1
routing: fix slice mutation bug that could result in an infinite loop
This commit fixes a pretty nasty unnoticed bug within the main
k-shortest paths algorithm loop. After a new candidate path is found,
the rootPath (the path up to the pivot node) and the spurPath (the
_new_ path after the pivot node) are to be combined into a new candiate
shortest path. The prior logic simply appended the spurPath onto the
end of the rootPath to create a slice. However, if the case that the
currnet rootPath is really a sub-path in a larger slice, then this will
mutate the underlying slice.

This bug would manifest when doing path finding and cause an infinite
loop as the slice kept growing with new spurPaths, causing the loop to
never terminate. We remedy this bug by properly create a new backing
slice, and adding the elements to them rather than incorrectly mutating
an underlying slice.
2017-04-13 14:48:17 -07:00
Olaoluwa Osuntokun
a4e26eaa4a
routing: fix bug in path finding when len(rootPath) > len(shortestPath)
This commit fixes a bug within the k-shortest paths routine which could
result in a daemon panic when traversing a graph with particular
characteristics. Before referencing the path to create a sub-slice, we
we’re properly asserting that the length of the path was at least as
long as the current rootPath in question. We fix this by simply
ensuring the length of the slice is adequate before proceeding with the
operation.
2017-04-13 14:44:59 -07:00
Olaoluwa Osuntokun
2d10d83f07
routing: assert that paths have same length in isSamePath 2017-04-13 14:42:35 -07:00
Olaoluwa Osuntokun
41a54145a7
routing: capitalize first letter of new error messages 2017-04-11 22:02:17 -07:00
Olaoluwa Osuntokun
ca053e5273
multi: minor coding style and comment clean ups post-discovery merge
This commit implements some minor coding style, commenting and naming
clean up after the recent major discovery service was merged into the
codebase.

Highlights of the naming changes:
* fundingManager.SendToDiscovery -> SendAnnouncement
* discovery.Discovery -> discovery.AuthenticatedGossiper

The rest of the changes consist primary of grammar fixes and proper
column wrapping.
2017-04-01 20:14:05 +02:00
Andrey Samokhvalov
07076cce21 routing+channeldb: add AddProof method
Originally we adding the edge without proof in order to able to use it
for payments path constrcution. This method will allow us to populate
the announcement proof after the exchange of the half proofs and
constrcutrion of full proof finished.
2017-03-29 19:49:05 -07:00
Andrey Samokhvalov
4bca54e30c routing: add validation of utxo
Add check that the edge that was received really exist in the blockchain
and that the announced funding keys and capcity corresponds to reality.
2017-03-29 19:49:05 -07:00
Andrey Samokhvalov
19174ebdfd channeldb: add storing of node signature and add edge signature
In order to properly announce the channel the announcements proofs
should be persistent in boltdb.
2017-03-29 19:49:05 -07:00
Andrey Samokhvalov
c3b2854428 lnwire: converge discovery part of messages with specification
Change the name of fields of messages which are belong to the discovery
subsystem in a such way so they were the same with the names that are
defined in the specification.
2017-03-29 19:49:05 -07:00
Andrey Samokhvalov
4c52b6e6a4 lnd: replace 'routing' with 'discovery' package
Add usage of the 'discovery' package in the lnd, now discovery service
will be handle all lnwire announcement messages and send them to the
remote party.
2017-03-29 19:49:05 -07:00
Andrey Samokhvalov
b4ac7071ff discovery+routing: split 'routing' package on 'routing' and 'discovery'
In this commit the routing package was divided on two separete one,
this was done because 'routing' package start take too much responsibily
on themself, so with following commit:

Routing pacakge:
Enitites:
* channeldb.ChannelEdge
* channeldb.ChannelPolicy
* channeldb.NodeLightning

Responsibilities:
* send topology notification
* find payment paths
* send payment
* apply topology changes to the graph
* prune graph
* validate that funding point exist and corresponds to given one
* to be the source of topology data

Discovery package:
Entities:
* lnwire.AnnounceSignature
* lnwire.ChannelAnnouncement
* lnwire.NodeAnnouncement
* lnwire.ChannelUpdateAnnouncement

Responsibilities:
* validate announcement signatures
* sync topology with newly connected peers
* handle the premature annoucement
* redirect topology changes to the router susbsystem
* broadcast announcement to the rest of the network
* exchange channel announcement proofs

Before that moment all that was in the 'routing' which is quite big for
one subsystem.

split
2017-03-29 19:49:05 -07:00
bryanvu
085b7333cb lnwire: add support for Features in NodeAnnouncement
Add support for Features in NodeAnnouncment according to spec.
2017-03-29 12:03:43 -07:00
bryanvu
9ffac9eae1 lnwire: update NodeAnnouncement to handle multiple addresses
This commit modifies address handling in the NodeAnnouncement struct,
switching from net.TCPAddr to []net.Addr. This enables more flexible
address handling with multiple types and multiple addresses for each
node. This commit addresses the first part of issue #131 .
2017-03-29 12:03:43 -07:00
Olaoluwa Osuntokun
6b3a258e86
multi: fix formatting issues in packge README's 2017-03-27 16:25:25 -07:00