Commit Graph

128 Commits

Author SHA1 Message Date
Olaoluwa Osuntokun
bbb34cebe0
routing: modify the TestSendPaymentRouteFailureFallback to clear missionControl between attempts
In order to maintain the original essence of the test, we need to clear
the state of missionControl with each attempt, essentially advancing
time between each payment attempt.
2017-10-16 19:07:40 -07:00
Olaoluwa Osuntokun
1d487ea78b Merge pull request #341 from cfromknecht/breach-filter-commit-dust
Breach Arbiter Ignore Dust Commitment Outputs
2017-09-26 17:10:12 -07:00
Conner Fromknecht
d66b8dad62
lnd_test: adds zero-value remote output retribution itest 2017-09-25 18:57:03 -07:00
Olaoluwa Osuntokun
7ae436e30e
htlcswitch+test: send switch back error on lnwallet.ErrInsufficientBalance
This commit fixes a bug related to swallowing an error that should go
to the switch in the case of an insufficient balance error when
attempting to add a new HTLC to the channel state machine. In this
case, an error would never be returned back to the client/switch, and
the internal processing within the channelLink would loop forever,
attempting to add an HTLC that can’t be added due to insufficient
balance to state machine itself.

We fix this issue by only treating the lnwallet.ErrMaxHTLCNumber as the
only error that prompts adding an HTLC to the overflow queue rather
than sending the error directly back to the switch.
2017-09-25 16:10:20 -07:00
Conner Fromknecht
b64d4356c1
lnd_test: adds breach test for remote hodl
This commit alters the existing retribution
  post breach conf test case with the intention
  of testing the correct response in event that
  the remote party broadcasts a prior state
  while HTLCs have been extended. This serves
  as a preliminary integration for an expansion
  of the breach arbiter integration tests.

  The primary change involves using the new
  htlchodl mode for debugging, which causes the
  remote peer to ignore any intent to settle
  incoming HTLCs. The result is that any
  payments sent to the remote party are held in
  limbo, allowing us to test for these
  conditions more accurately.

  Currently the test case only tests that the
  justice transaction is mined. After we have
  fully integrated the breach arbiter to sweep
  2nd layer HTLCs, this test will be altered
  to check for spends from the appropriate
  inputs.
2017-09-19 19:18:20 -07:00
Olaoluwa Osuntokun
3e97aa3931
test: within testListPayments also wait for bob to learn of channel 2017-09-18 17:16:47 -07:00
Conner Fromknecht
4248836a2a lnd_test: use fresh Carol node for breach itest 2017-08-25 17:56:50 -07:00
Conner Fromknecht
85b76570ef lnd_test: increase startup timeout for breach itests 2017-08-25 17:56:50 -07:00
Conner Fromknecht
43b469be5a lnd_test: switch btcrpcclient to rpcclient 2017-08-25 17:56:50 -07:00
Conner Fromknecht
b7e426ecdc lnd_test: test breach persistence after breach conf 2017-08-25 17:56:50 -07:00
Philip Hayes
b19c483a04 breacharbiter: add retribution state persistence
This commit adds a breached contract retribution storage layer using
boltdb to the breach arbiter. The breach arbiter now stores retribution
state on disk between detecting a contract breach, broadcasting a
justice transaction that sweeps the channel, and finally witnessing the
justice transaction confirm on the blockchain. It is critical that such
state is persisted on disk, so that if our node restarts at any point
during the retribution procedure, we can recover and continue from the
persisted state.
2017-08-25 17:56:50 -07:00
Olaoluwa Osuntokun
9f0efddc20
multi: switch from btcrpcclient to rpcclient 2017-08-24 18:54:24 -07:00
Olaoluwa Osuntokun
ed3268b988
test: in testSingleHopInvoice also wait for bob to advertise the channel 2017-08-22 00:54:20 -07:00
Olaoluwa Osuntokun
08d22f8bb4
lnd: modify htlc error integration tests to account for max payment size
This commit modifies the HTLC integration tests to be mindful of the
max payment size. Rather than sending the payment in one large batch,
we instead now send it in chunks of the max payment size.
2017-08-22 00:54:07 -07:00
bryanvu
c87678e695 test: reposition context creation and extend TLS timeout
Fixes timeouts during integration tests on slower machines.
2017-08-19 16:42:33 -07:00
Alex
a7218e84ea lnd_test: reverse the order of teardown for lnd and btcd harnesses
This commit prevents the case where btcd stops before lnd is fully
started, thus making lnd_test hang on trying to stop lnd using
`StopDaemon`. The underlying issue is that while lnd is trying to
start the server and subscribe to block notifications from btcd,
btcd stops, and lnd continues to attempt to reconnect before it
ever starts the interrupt handler. This reversal avoids that issue
by making sure lnd is stopped before btcd.
2017-08-19 16:37:16 -07:00
Alex
58c6989e74 tests: fix several timeout issues 2017-08-14 17:02:31 -07:00
Conner Fromknecht
84a0806da4 lnd_test: allow assertNumConnections to exit early 2017-08-10 16:14:01 -07:00
Conner Fromknecht
56a628d3ad lnd_test: adds polling to assertNumConnections 2017-08-10 16:14:01 -07:00
Johan T. Halseth
6858b1e1b2 integration tests: add sleep before opening second channel.
In the "multiple channel creation" test, in some cases the
responder (Bob) was not yet considering the first channel
to be opened (activeReservation still not deleted in
fundingManager) when Alice tried to open the second channel.
This would cause the test to fail. This commit adds a small
sleep before the creation of the second channel, to give
Bob some time to finish the opening process.
2017-08-10 13:14:25 -07:00
Olaoluwa Osuntokun
f13c81eb6a
test: ensure all tests adhere to maximum funding amount 2017-08-07 16:31:32 -07:00
Olaoluwa Osuntokun
3557274142
test: in testGraphTopologyNotifications only expect 3 notifications
This commit updates the integration tests to reflect the reality after
removing code that would always attempt to increment the current update
timestamp by one for each channel announcement. Without connecting
directly to carol, it isn’t guaranteed that Alice will receive that
announcement as Bob would have already processed one for Carol when
their channel was created.
2017-08-04 18:34:18 -07:00
Olaoluwa Osuntokun
cfa45c15f7
test: add a select statement to avoid error if lnd is shutting down 2017-08-02 21:00:26 -07:00
Johan T. Halseth
e2112702e7 fundingmanager: send node announcements after channel open.
Make the fundingmanager send an updated node announcement
each time it opens a new channel. This is to make sure
our node announcement is propagated in the network, since
peers will ignore our node announcements if we haven't
opened any channels yet.
2017-08-02 15:58:58 -07:00
Olaoluwa Osuntokun
0f2fcf68b2
test: update testChannelFundingPersistence to use --defaultchanconfs 2017-07-30 20:26:38 -07:00
Olaoluwa Osuntokun
fa3fd9a19a
test: update integration tests framework API usage to recent change
OpenPendingChannel and OpenChannel no longer take a number of
confirmations as a parameter.
2017-07-30 20:24:54 -07:00
Andrey Samokhvalov
2d378b3280 htlcswitch+router: add onion error obfuscation
Within the network, it's important that when an HTLC forwarding failure
occurs, the recipient is notified in a timely manner in order to ensure
that errors are graceful and not unknown. For that reason with
accordance to BOLT №4 onion failure obfuscation have been added.
2017-07-14 19:08:04 -07:00
Olaoluwa Osuntokun
f9f9d68543
test: ensure the WaitForBlockchainSync grouting always exits
This commit fixes a minor bug in the goroutine that’s launched to check
the sync status of a particular node. Previously, the goroutine could
end up infinitely stuck on a send as once the chain has been detected
as synced, it didn't exit.

We fix this now by ensure that the goroutine always terminates after
the initial notification to the caller. Additionally, we not ensure
that both the internal and exterior goroutine are both reading off of
the peer’s quit channel.
2017-07-11 16:29:35 -07:00
Olaoluwa Osuntokun
21cb3837c4
test: add synchronization to testDisconnectingTargetPeer 2017-07-06 14:18:04 -07:00
Olaoluwa Osuntokun
f39b7aaaf9
build: create parallel travis builds to isolate race condition tests
This commit modifies the travis build script, and our local test script
to ensure that the race condition builds are conducted in a parallel
build. After this commit two travis builds will be kicked off for each
push/commit: one that runs the race condition tests in isolation, and
another that runs the integration tests then the coverage tests.

In order to do the above cleanly, the integration tests are now guarded
behind a build flag. In order to run the integration tests, one now
needs to specify the `-tags rpctest` flag when running the `go test`
command.
2017-07-04 16:05:22 -07:00
Andrey Samokhvalov
aed2e5865f test: hack fix of panic by disabling btcrpcclient log 2017-06-25 14:19:56 +01:00
Olaoluwa Osuntokun
10ca654054
test: in async bi-di payment test wait for both sides to see the channel 2017-06-19 16:39:12 +02:00
BitfuryLightning
e324fe5818 test: ensure blocks are synchronized before opening channels, allow more time for sync payments
Fix bug with synchronizing blockchain by adding several retries. Allow
to launch individual tests. Increase timeout for async payments.

Fixes #213.
2017-06-19 15:53:52 +02:00
Olaoluwa Osuntokun
a43b5658bb
test: update integration tests to account for base fees
In a recent commit, a default base fee of 1 satoshi has been added, as
a result we now need to factor in the fees paid in a multi-hop setting.
2017-06-17 00:20:14 +02:00
Andrey Samokhvalov
b3f376fac9 test: add async bydirectional test
In this commit additional test have been added which tests the ability
of Alice and Bob asynchroniously exchange the payment between each
other. This scenario will be higly frequent in the payment between
payment providers.
2017-05-31 11:06:08 -07:00
Andrey Samokhvalov
f48f653a7c test: add async payments stress test
In this commit asynchronous stress payment test have been added which
tests the ability of lnd to be sustainable.
2017-05-31 11:06:08 -07:00
Andrey Samokhvalov
6861df0e23 rpcserver: add additional 'error' field in payment response
In order to not close the payment stream on payment error the additional
field have been added in payment response. Now error from stream Recv()
function means that something has happend inside the client and we unable
to process any payment farther, and error inside the payment response
means, that something wrong has happend with payment itself.
2017-05-31 11:06:08 -07:00
Olaoluwa Osuntokun
67791755af
lnd: use a default temporary static fee of 50 sat/byte for BTC 2017-05-16 19:12:27 -07:00
bryanvu
4ac7cc719f lnwallet: replace hard-coded fees and adjust tests accordingly
This commit replaces the hard-coded 5000 satoshi fees with calls to the
FeeEstimator interface. This should provide a way to cleanly plug in
additional fee calculation algorithms in the future. This change
affected quite a few tests. When possible, the tests were changed to
assert amounts sent rather than balances so that fees wouldn't need to
be taken into account. There were several tests for which this wasn't
possible, so calls to the static fee calculator were made.
2017-05-15 20:26:11 -07:00
bryanvu
7768415adc test: change integration tests to assert amounts sent rather than balances.
This commit changes the SingleHop and MultiHop integration tests to
assert amounts sent rather than balances. Because fees can be odd
amounts, this change makes it such that fee amounts don't need to be
explicitly taken into account in the tests.
2017-05-15 20:26:11 -07:00
bryanvu
c1769f959b lnwallet: fix failure messages, spacing in tests
This commit changes t.Fatal to t.Fatalf in TestCheckDustLimit so as to
provide more information. This commit also makes some column width
adjustments and minor spelling/formatting changes.
2017-05-15 20:26:11 -07:00
Olaoluwa Osuntokun
bc1a228645
test: remove unnecessary sleep before pendingChannels query 2017-05-15 18:21:05 -07:00
Philip Hayes
3b84db1f25 rpc: add signature to VerifyMessage response 2017-05-12 14:21:19 -07:00
Philip Hayes
2249215260 rpc: add SignMessage and VerifyMessage interface
This commit allows users to sign messages with their node's private key
with the SignMessage interface. The signatures are zbase32 encoded for
human readability/paste-ability.  Others users can verify that a message
was signed by another node in their channel database with the
VerifyMessage interface.
2017-05-12 14:21:19 -07:00
Olaoluwa Osuntokun
31cb1cb65b
routing/chainview: linter fixes 2017-05-11 15:36:47 -07:00
Olaoluwa Osuntokun
98adeb6657
server: properly add user initiated persistent conns to persistentPeers map
This commit fixes a prior bug wherein if a user connected to a peer
using the —perm command, then once the peer was disconnected, we
wouldn’t automatically connect to them.
2017-05-05 15:57:14 -07:00
afederigo
1eaa522265 tests: add test case "disconnecting target peer"
Issue: 139

This commit contains test case "disconnecting target peer" (second test case) which takes two
connected peers, then checks via assert method one connection exists,
then disconnects this remote peer by passing pubKey parameter (just some string) into RPC-call method. Then checks 0
connection exists, and then connects disconnected peer for passing
further tests, and then checks one connection exists.
2017-05-05 14:24:25 -07:00
Olaoluwa Osuntokun
533cd69c7b
test: only assert pending close channels if didn't force close 2017-05-04 18:06:18 -07:00
Olaoluwa Osuntokun
3538dffe4e
test: add additional assertions to force close tests, verify pending channels 2017-05-04 17:41:00 -07:00
Olaoluwa Osuntokun
18a0849f3b
test: ensure channel shows up as pending close in closeChannelAndAssert 2017-05-04 17:40:54 -07:00