This commit fixes an incorrectly calculated size of a
*FeatureVector in the serializedSize() function. go-fuzz
found that when calling NewFeatureVectorFromReader, if
a flag is invalid, it is not added to f.flags. However,
it will skip the index that wasn't included. This
becomes a problem when serializedSize() calculates the
length of f.flags via len() which can lead to an index
out of range since certain flags may be missing.
This commit fixes an existing deviation in the way we encode+decode the
addresses within the NodeAnnouncement message with that of the
specification. Prior to this commit, we would encode the _number_ of
addresses, rather than the number of bytes it takes to encode all the
addresses.
In this commit, we fix this mistake by properly writing out the total
number of bytes, modifying our parsing to take account of this new
encoding.
This commit fixes an existing, unnoticed bug within the lnwire.
NewChanIDFromOutPoint function. Two lingering issues cause the function
to not do anything at all, meaning that the channel ID, would be the
exact same as the actual txid passed in.
The first issue was that the xorTxid function wasn’t actually XOR’ing
the last two bytes. This was due to the fact that the function wasn’t
taking a pointer to the target ChannelID, meaning that the mutation
wouldn’t be seen outside of the scope of the function. Second, we had
our slicing reversed, rather than buf[30:], we were using buf[:30],
meaning that we were weren’t properly filling the buffer with the lower
2-bytes of the passed index.
This commit modifies the main test loop within
TestChannelIDOutPointConversion stricter. With this commit, we now
ensure that the conversion function actually does _something_. This is
the first in a series of commits to fix a recently discovered bug
within the outpoint to channel ID conversion routines.
This is a very simple bug that go-fuzz found. If length of an address
within CloseSigned is greater than 34, a runtime error: slice bounds out
of range happens. An error should be returned instead.
In this commit we reverse the ordering of the MinAcceptDepth and
HltcMinimum fields within the AcceptChannel message. Previously, the
order of these two fields were reversed, meaning the remote peer
would’ve attempted to parse the MinAcceptDepth (as we intended), as
part of the HtlcMinimum, leading to a garbage value.
This commit fixes a diversion from the way the UpdateAddHTLC message is
defined within the specification. We had the HTLC expiry value in the
wrong place on the wire, which meant that we couldn’t parse the
messages as sent by the other LN implementations.
This corrects the fuzz test in TestLightningWireProtocol for
MsgCommitSig to avoid creating an empty slice since the decoded message
only creates a slice when there are greater than zero signatures and an
empty slice is not considered equal to a nil slice under reflection.
This can be tested by running the TestLightningWireProtocol 1000 times
in a loop with and without this change.
This commit does away with the ErrorCode field in order to ensure that
we’re properly compatible with BOLT-0002. In the future the error code
field may be re-introduced as it’s much easier to check against an
internet error rather than interpret a byte slice describing the error.
This commit modifies the NodeAnnouncement message to ensure that it
matches the current spec ordering. The spec was recently modified to
place the feature vector first to allow for future changes to the
fields to be forwards compatible.
This commit updates the encoding/decoding for the onion errors to
properly match BOLT-0004. This commit does to major things: we increase
the max message size to 256 bytes to account for recent modifications
to the ChannelUpdate message, and also fold in the error code into the
failure message encapsulation itself.
This commit adds a new type to the lnwire package: MilliSatoshi. A
milli-satoshi is simply 1/1000th of a satoshi, and will be used for all
internal accounting when sending payments, calculating fees, updating
commitment state, etc. Two helper methods are added: ToBTC(), and
ToSatoshis() to make manipulation of the values easy.
This commit adds a new field to the CommitSig message: HtlcSigs. This
new field will house signatures for each of the HTLC’s on the newly
created commitment state. This addition allows us to implement the new
commitment transaction structure outlined within the specification
which modifies HTLC’s such that the claiming process is now a two-phase
process. The first state transitions an HTLC to the delay+claim state,
and the second state (after the delay has passed) allows the
broadcaster of the commitment transaction to sweep the HTLC’s.
Fixes#61.
This commit modifies the readElement and writeElement functions to add
the capability of reading/writing a slice of btcec.Signature. This new
case is required for the upcoming commit which will modify the
CommitSig message to include a field which houses signatures of reach
HTLC on the commitment transaction.
This commit adds the new set of single funder messages from the
specification. As a result, after this commit and a follow up, all of
our messages will directly line up with those that are detailed within
the specification.
The new set of funding messages are very similar to our prior ones,
aside from the main difference of the addition of several channel level
constraints that give nodes control over their exposure, throughput,
and other values.
This commit modifies the RevokeAndAck message in order to bring it more
in line with the current draft of the specification. The prior version
was based on a version that used a revocation hash for HTLC’s and a
revocation key for commitment outputs. The current commitment design
uses revocation keys uniformly throughout.
This commit removes the original single funder wire messages as they’ve
now been deprecated by the new commitment and HTLC structure within the
latest draft of the specification.
In this commit BOLT#4 specification message have been added to the
lnwire package. This messsage is needed in order to notify payment
sender that forwarding node unable to parse the onion blob.
In this commit onion routing error from BOLT#4 have been added, the
initial error construction have been splitted on two parts: The first
part which contains the actual data will reside inside the lnwire
package because it contains all necessary function to decode/encode
the data. The second part obfuscation and hmac checking will resides
inside the lighting-onion package because it requires the key
generation.
This commit updates the OnionPacketSize constant in order to reflect
the size of the onion payload as a result of the recent changes to the
sphinx packet format in the specification.
This commit gives the start for making the htlc manager and htlc switch
testable. The testability of htlc switch have been achieved by mocking
all external subsystems. The concrete list of updates:
1. create standalone package for htlc switch.
2. add "ChannelLink" interface, which represent the previous htlc link.
3. add "Peer" interface, which represent the remote node inside our
subsystem.
4. add htlc switch config to htlc switch susbystem, which stores the
handlers which are not elongs to any of the above interfaces.
With this commit we are able test htlc switch even without having
the concrete implementation of Peer, ChannelLink structures, they will
be added later.
This commit changes the cooperative channel close workflow to comply
with the latest spec. This adds steps to handle and send shutdown
messages as well as moving responsibility for sending the channel close
message from the initiator to the responder.
This commit fixes a deviant in the way we serialize and deserialize the
node announcement message from that which is currently in the spec.
Before this commit we reversed the order of features and addresses.
Instead, on the wire, features should come _before_ the addresses.
We also add a new temporary feature bit to ensure nodes that don’t
directly connect to each other if they don’t have this new update.
However, this will also partition any current tests nets when new nodes
join them as the digest signed has changed, therefore invalidating any
older messages.
Fixes#207.
This commit modifies ReadMessage to no longer return the total bytes
read as this value will now be calculated at a higher level. The
io.Reader that’s passed to ReadMessage is expected to contain the
_entire_ message rather than be a pointer into a stream that contains
the message itself.
This commit does away with all the old manual message equality tests
and replace it with a single property-based test that uses the
testing/quick package. This test uses a single scenario which MUST hold
for all the messages type and all possible messages generated for those
types. As a result we are able to do away with all the prior manually
generated test data as the fuzzer to scan the input space looking for a
message that violates the scenario.
This commit abandons our old bitcoin inspired message header and
replaces it with the bare type-only message headers that’s currently
used within the draft specification. As a result the message header now
consists of only 2-bytes for the message type, then actual payload
itself. With this change, the daemon will now need to switch to a
purely message based wire protocol in order to be able to handle the
extra data that can be extended to arbitrary messages.
This commit fixes a bug lingering in the decoding of the feature
vectors which was masked by the prior method of reading the _entire_
message from the stream before parsing it. The issue was that
performing a zero-byte Read on an io.Reader that’s purely streaming
will result in an indefinite block. We fix this bug by properly using
io.ReadFull in this context.
This commit modifies the Message interface to convert the Command
method to a MsgType method that uses a new set of message type for all
the defined messages. These new messages types nearly exactly match the
message types used within the current draft of the BOLT specifications.
This commit revues the Validate method from the Message interface as
the method is no longer used and is a relic from an older version of
the codebase.
This commit implements the new ping/pong messages along with their new
behavior. The new set of ping/pong messages allow clients to generate
fake cover traffic as the ping messages tells the pong message how many
bytes to included and can also be padded itself.
This commit does to things: moves the prior ShortChannelID struct into
a new short_channel_id.go file, and also implements the new ChannelID’s
currently used within he specification.
These new ID’s are 32-bytes in length and used during initial channel
funding as well as during normal channel updates. During initial
channel funding, the ID is to be a random 32-byte string, while once
normal channel operation has began, the ID is to be (txid XOR index),
where index is the index of the funding outpoint.
Change the name of fields of messages which are belong to the discovery
subsystem in a such way so they were the same with the names that are
defined in the specification.
In this commit announcement signature message has been added which is
needed when peers want to announce their channel to the rest of the
network. This message acts as half proof carrier, nodes exchanges
their half proofs with each other and after that they are able to
construct the full proof.
This commit modifies address handling in the NodeAnnouncement struct,
switching from net.TCPAddr to []net.Addr. This enables more flexible
address handling with multiple types and multiple addresses for each
node. This commit addresses the first part of issue #131 .
This commit modifies the ChannelUpdateAnnouncement to rename the Expiry
variable instead of TimeLockDelta as that is more descriptive of the
purpose of the attribute itself.
When the funding transaction has been confirmed, the FundingLocked
message is sent by the peers to each other so that the existence of the
newly funded channel can be announced to the network.
This commit also removes the SingleFundingOpenProof message.
Once a channel funding process has advanced to the point of broadcasting
the funding transaction, the state of the channel should be persisted
so that the nodes can disconnect or go down without having to wait for the
funding transaction to be confirmed on the blockchain.
Previously, the finalization of the funding process was handled by a
combination of the funding manager, the peer and the wallet, but if
the remote peer is no longer online or no longer connected, this flow
will no longer work. This commit moves all funding steps following
the transaction broadcast into the funding manager, which is available
as long as the daemon is running.
This commit removes the String() method from the FeatureVector as it
can produce confusing output when revving a feature vector and not
knowing the strip mapping ahead of time.
This commit creates a distint type for the opaque failure reason within
the UpdateFailHTLC message. This new type is needed as this is the only
variable length byte slice within the protocol and therefore requires a
length prefix in order to serialize/deserialize properly.
This commit modifies the prior HTLCSettleRequest to more closely match
the UpdateFufillHTLC defined within the specification. The only
semantic change is the move from a slice of pre-images (for “multi-sig”
LN) to a single payment preimage.
This commit morphs the prior CancelHTLC into the new UpdateFailHTLC
message and also gets rid of the obsolete HLTCAddReject message while
we’re at it.
The primary change from the CancelHTLC message to the UpdateFailHTLC
message is that the CancelReason is now simply called Reason and that
it’s now an opaque encrypted set of bytes. With this update the failure
messages are now more flexible (they can even carry new
ChannelUpdate’s) and also don’t reveal the exact cause of failure to
intermediate nodes.
This commit renames and modifies the CommitSignature message to more
closely match the CommitSig message defined within the current set of
draft specifications.
The major change within the new message is that we now longer
explicitly specify the update log index of the remote node that this
signature covers. This is due to the fact the revocation message now
also double as acknowledgements of the remote parties recevied
commitment update messages.
This commit renames the prior CommitRevocation message to RevokeAndAck
in order to better align the set of wire messages implemented by the
`lnwire` message with those currently defined within the specification.
'init' message is the first message reveals the features supported or required
by this node. Nodes wait for receipt of the other's features to simplify error
diagnosis where features are incompatible. This message will help negotioate the
the features which are supported by both sides.
This commit adds a new restriction around funding channels at the
daemon level: lnd nodes will not allow either the initiation or the
acceptance of a channel before the node is fully synced to the best
known chain.
This fixes a class of bug that arises when a new node joins the network
and either attempts to open a channel or has a channel extended to them
before the node is fully synced to the network.
This commit adds a new error type to the `lnwire` package:
`UnknownMessage`. With this error we can catch the particular case of a
an error during reading that encounters a new or unknown message. When
we encounter this message in the peer’s readHandler, we can now
gracefully handle it by just skipping to the next message rather than
closing out the section entirely.
This puts us a bit closer to the spec, but not exactly as it has an
additional constraint that we can only ignore a new message if it has
an odd type. In a future release, we’ll modify this code to match the
spec as written.
This commit modifies the login of sent/recv’d wire messages in trace
mode in order utilize the more detailed, and automatically generated
logging statements using pure spew.Sdump.
In order to avoid the spammy messages due to spew printing the
btcec.S256() curve paramter within wire messages with public keys, we
introduce a new logging function to unset the curve paramter to it
isn’t printed in its entirety. To insure we don’t run into any panics
as a result of a nil pointer defense, we now copy the public keys
during the funding process so we don’t run into a panic due to
modifying a pointer to the same object.
This commit adds a new paramter to the initial channel creation:
‘PushSatoshis’. This new field allows the funder of a channel to push
over a certain amount to the responder as part of the initial channel
state. This ability creates a new streamlined UX of finalizing a
payment as a part of the channel creation.
This commit adds a new HTLC error type: IncorrectValue. This error type
is to be used when an HTLC that’s extended to the final destination
does not match the expectation of the destination.
This commit adds a new field to the CancelHTLC message which describes
the event that led to an HTLC being cancelled up stream.
A new enum has been added which describers the “why” concerning the
cancellation of the HTLC. Currently the encoding and back propagation
of the errors aren’t properly implemented as defined within the spec.
As a result the current error types provide to privacy as the error are
in plain-site rather doing being properly encrypted.
This commit makes a large number of minor changes concerning API usage
within the deamon to match the latest version on the upstream btcsuite
libraries.
The major changes are the switch from wire.ShaHash to chainhash.Hash,
and that wire.NewMsgTx() now takes a paramter indicating the version of
the transaction to be created.
This commit modifies the SingleFundingOpen message to include the
compact channel ID of the finalized transaction rather than a “fake”
SPV proof. This change is a stop-gap which allows us to implement
portions of BOLT07 without yet fully implementing all parts of BOLT[02,
03].
This commit removes the older routing/discovery messages from the
unwire package, as we’ll be converging towards BOLT07 in the near-term.
In the mid to far term we’ll be revisiting integrating Flare into the
newer scheme in order to take advantage of its scaling characteristics.
This commit removes the previous test cases which excised the proper
validation of graph announcements on the network. As full generation of
the authenticated messages has not yet been implemented, these tests
aren’t currently applicable.
In a future commit, these tests will be replicated on the new discovery
package which will handle producing the channel proofs and also fully
validating them.
This commit modifies the Alias type to only hold the non-zero portion
of the alias as encoded on the wire. Previously the entire 32-bytes
would be read and stored, including the zeroes at the end used as
padding. Within the constructor, we now parse the alias properly,
discarding the trailing zeroes within the passed byte slice.
Additionally, the .String() method of Alias will now also only print
the non-zero prefix of the decoded alias.
This commit temporarily disables the signature validation for all
announcement related messages which should be authenticated by one or
many parties. This feature is being disabled as we don’t yet generate
valid signatures for our advertisements and the validation of the
messages should be placed in the layer 3 discovery service rather than
within within the message parsing layer.
This commit separates out the ChannelID into a new file, with
additional helper methods for conversion and formatting. With this
commit, the struct is now more general purpose and can be used in the
new routing package, database, and other related sub-systems.
This commit modifies the encoding of signatures on the wire to use
a fixed-size 64-byte format. This change is required as the current spec
draft dictates that all signatures be encoded as `R` and `S` as 32-byte
big-endian integers. With this, signatures are now always a _fixed_ size
slice of bytes on the wire, which is nice to have.
Fixes#83.
Use [33]byte for graph vertex representation.
Delete unneeded stuff:
1. DeepEqual for graph comparison
2. EdgePath
3. 2-thread BFS
4. Table transfer messages and neighborhood radius
5. Beacons
Refactor:
1. Change ID to Vertex
2. Test use table driven approach
3. Add comments
4. Make graph internal representation private
5. Use wire.OutPoint as EdgeId
6. Decouple routing messages from routing implementation
7. Delete Async methods
8. Delete unneeded channels and priority buffer from manager
9. Delete unneeded interfaces in internal graph realisation
10. Renamed ID to Vertex
This commit adds Ping and Pong messages to the suite of lnwire
messages. The usage of these messages within the daemon are similar to
the usage of Bitcoin’s ping/pong messages. Pings are to be sent
periodically with a random nonce to check connection activity and also
to gauge latency. Pong’s are to be sent in reply to ping messages,
echo’ing the same nonce used.
This commit modifies lnwire.NetAddress by adding a .Network() method.
With this added method the struct now implements the net.Addr interface
meaning that it can now be transparently passed into any context where
a net.Addr is requested.
This change paves the way to integration of btcd’s new connmgr into the
daemon to handle establishing persistent connections to all channel
counter parties.
This commit modifies both the Sphinx packet generation and processing
for recent updates to the API.
With the version 1 Sphinx specification, the payment hash is now
included in the MACs in order to thwart any potential replay attacks.
As a result, any attempts to replay previous HTLC packets MUST re-use
the same payment hash, meaning that the first-hop node can simply
settle the HTLC immediately, thwarting the attacker.
Additionally, within the Sphinx packet, each hop now gets a per-hop
payload which contains the necessary details (CTLV value, fee, etc) for
the node to successfully forward the payment. This per-hop payload is
protected by a packet-wide MAC.
This commit adds a few workarounds in order to concurrently support the
REST proxy as well as the regular gRPC interface. Additionally,
concrete support for the following RPC calls has been added:
GetTransactions, SubscriptTransactions, SubscribeInvoices, and
NewWitnessAddress.
This commit removes the previous HTLC timeout in message in favor of a
HTLC cancel message. Within the protocol, a timeout message would never
be sent backwards along the route as in the case of an HTLC timeout
before/after the grace period, the course of action taken would be to
broadcast the current commitment transaction unilaterally on-chain.
LIGHT-131, LIGHT-140, LIGHT-138
`lncli showroutingtable` may output routing table as image.
Use graphviz for graph rendering.
Add explicit version dependency for tools. Add error checking.
LIGHT-138, LIGHT-141. Due to some issues in sending/receiving parts of lnd,
messages with zero length are not sent. So added some mock content to
NeighborAck. Moved sender/receiver from routing message to wrap message
which contains lnwire routing message.
LIGHT-133, LIGHT-138 Make output of `lncli showrouting table` in
two different formats: table and json.
Instead of sending serialized routing table send list of channels.
This commit integrates BitFury's current routing functionality into lnd. The
primary ochestration point for the routing sub-system in the routingMgr. The
routingMgr manages all persistent and volatile state related to routing within
the network.
Newly opened channels, either when the initiator or responder are inserted into
the routing table once the channel is fully open. Once new links are inserted
the routingMgr can then perform path selection in order to locate an "optimal"
path to a target destination.
With this commit a revocation message now carries 3 items:
1. A pre-image revoking the lowest unrevoked commitment transaction
in the commitment chain.
2. A new key which extends the current revocation window by 1. This
key is to be used for new commitment transactions.
3. A new hash which also extends the current revocation window by 1.
This hash is to be used for new HTLC revocation hashes.
This commit updates the CommitSignature message to match the latest
version of the state-machine protocol. The log index specifies up to
which index in the receiver’s HTLC log the sender’s signature covers.
We now enforce that the site of all revocation pre-images+hashes (used
for HTLC’s) are now 32-bytes.
Additionally, all payment pre-images are now required to be 32-bytes
not he wire. There also exists a Script level enforcement of the
payment pre-image size at a lower level.
This commit serves to unify the sizes of all hashes/pre-images across
the codebase.
This commit updates the messages sent during a single funder workflow
to utilize revocation keys rather than revocation hashes. This now
matches the latest updates to the commitment transaction.
The changes to the workflow are as follows:
* the response message now carries the responder’s revocation key
* the complete message now carries the initiator’s revocation key
Once the initiator receives the response message, it can construct both
versions of the commitment transaction as it now knows the responder’s
commitment key. The initiator then sends their initial revocation key
over to the responder allowing it to construct the commitment
transactions and give the initiator a sig for their version.
This commit modifies most of the wire messages to uniquely identify any
*active* channels by their funding output. This allows the wire
protocol to support funding transactions which open several channels in
parallel.
Any pending channels created by partial completion of the funding
workflow are to be identified by a uint64 initialized by both sides as
follows: the initiator of the connection starts from 0, while the
listening node starts from (1 << 63). These pending channel identifiers
are expected to be monotonically increasing with each new funding
workflow between two nodes. This identifier is volatile w.r.t to each
connection initiation.
This commit adds some cursory documentation along wit minor field
modifications to all messages which deal with adding HTLC’s, or
updating remote commitment transactions.
The messages for dual funding of channel is left purposefully
undocumented as all initial negotiations will be single funder by
default.
A revamp of the testing infrastructure of lnwire will be committed in
the near future.
The SFOP is the final message sent during the single funding channel
negotiation protocol. Once Alice sends the SFOP message to Bob, Bob
will then commit resources to watching and updating the newly created
channel with Alice.
This commit adds some additional documentation in the form of comments
to the start of the revised single funder workflow.
A primary change lies in the introduction of the exchange of Channel
Derivation Points (CDP’s) for both sides. Using CDP’s we can derive
channel authentication proofs which are both unforgettable and binding.
This commit adds the SingleFundingSignComplete message to the single
funder transaction workflow. This marks the second to last message sent
in the workflow. The message transports Bob’s signature for the
commitment transaction, allowing Alice to broadcast the funding
transaction as she can now refund her inputs.
This commit adds the SingleFundingComplete message to the single funder
channel workflow. This is the 3rd message sent in the workflow,
traveling from Alice to Bob once Alice is able to construct the final
commitment transaction.
* Added description in lnwire/README.md for state machine
* Figured out mutex stuff...
* Started the State Machine (using dummy functions for net/db)
* Minor corrections in wire protocol (changed some names/types)
- Renamed StagingID to HTLCKey of type HTLCKey (uint64)
* Structs and wire messages for HTLCs
* Wire protocol for a state machine with no blocking(!!!)
(I will write the state machine)
TL;DR: Can do multiple HTLC modifications in-flight, dead simple wire
protocol. Both sides can update their Commitments unliaterally without
waiting for the other party's signature. Will have basic/preliminary
notes in the README
* Added **swp to .gitignore because of vim annoyances
