Commit Graph

345 Commits

Author SHA1 Message Date
Johan T. Halseth
6cc162e0b0
router: make sendToRoute omit payment lifecycle
Instead of having SendToRoute pull routes from the payment session in
the payment lifecycle, we utilize the new methods on the paymentShard to
launch and collect the result for this single route.

This also let us remove the check for noRouteError, as we will always
have the result from the tried attempt returned. A result of this is
that we can finally remove lastError from the payment lifecycle (see
next commits).
2020-04-02 10:24:35 +02:00
Johan T. Halseth
9712dd1a7f
routing/payment_lifecycle: extract attempt sending logic
Define shardHandler which is a struct holding what is needed to send
attempts along given routes. The reason we define the logic on this
struct instead of the paymentLifecycle is that we later will make
SendToRoute calls not go through the payment lifecycle, but only using
this struct.

The launch shard is responsible for registering the attempt with the
control tower, failing it if the launch fails. Note that it is NOT
responsible for marking the _payment_ failed in case a terminal error is
encountered. This is important since we will later reuse this method for
SendToRoute, where whether to fail the payment cannot be decided on the
shard level.
2020-04-02 10:24:34 +02:00
Johan T. Halseth
bcca1ab821
routing/payment_lifeycle: remove payment level attempt and circuit
We replace the cached attempt, and instead use the control tower
(database) to fetch any in-flight attempt. This is done as a
preparation for having multiple attempts in flight.

In addition we remove the cached circuit, as it won't be applicable when
multiple shards are in flight.

Instead of tracking the attemp we consult the database on every
iteration, and pick up any existing attempt. This also let us avoid
having to pass in the existing attempts from the payment loop, as we
just fetch them direclty.
2020-04-02 10:24:34 +02:00
Johan T. Halseth
79227bab3a
routing/route: define route.ReceiverAmt() method 2020-04-02 10:24:34 +02:00
Johan T. Halseth
00903ef9f5
routing/payment_session: make RequestRoute take max amt, fee limit and
active shards

In preparation for doing pathfinding for routes sending a value less
than the total payment amount, we let the payment session take the max
amount to send and the fee limit as arguments to RequestRoute.
2020-04-02 10:24:33 +02:00
Johan T. Halseth
f9eeb6b41f
routing/router+lifecycle: remove LightningPayment from payment lifecycle
Now that the information needed is stored by the paymentSession, we no
longer need to pass the LightningPayment into the payment lifecycle.
2020-04-02 10:24:33 +02:00
Johan T. Halseth
c2301c14b2
routing/payment_session: make NewPaymentSession take payment directly
This commit moves supplying of the information in the LightningPayment
to the initialization of the paymentSession, away from every call to
RequestRoute.

Instead the paymentSession will store this information internally, as it
doesn't change between payment attempts.

This is done to rid the RequestRoute call of the LightingPayment
argument, as for SendToRoute calls, it is not needed to supply the next
route.
2020-04-02 10:24:33 +02:00
Olaoluwa Osuntokun
28bbaa2a94
routing: convert to use new kvdb abstraction 2020-03-18 19:34:58 -07:00
Joost Jager
48c0e42c26
channeldb+routing: store all payment htlcs
This commit converts the database structure of a payment so that it can
not just store the last htlc attempt, but all attempts that have been
made. This is a preparation for mpp sending.

In addition to that, we now also persist the fail time of an htlc. In a
later commit, the full failure reason will be added as well.

A key change is made to the control tower interface. Previously the
control tower wasn't aware of individual htlc outcomes. The payment
remained in-flight with the latest attempt recorded, but an outcome was
only set when the payment finished. With this commit, the outcome of
every htlc is expected by the control tower and recorded in the
database.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2020-03-09 18:31:33 +01:00
Joost Jager
8558534417
routing: add clock to router config 2020-03-09 11:43:44 +01:00
Johan T. Halseth
bee2380441
channeldb: rename PaymentAttemptInfo to HTLCAttemptInfo
To better distinguish payments from HTLCs, we rename the attempt info
struct to HTLCAttemptInfo. We also embed it into the HTLCAttempt struct,
to avoid having to duplicate this information.

The paymentID term is renamed to attemptID.
2020-03-09 11:43:26 +01:00
Joost Jager
967b4b2dc3
channeldb: remove redundant MPPaymentCreationInfo struct
MPPaymentCreationInfo and PaymentCreationInfo are identical except for
the naming of CreationTime/CreationDate.
2020-03-09 11:43:24 +01:00
Joost Jager
06bdeb56e2
routing: add graph interface 2020-02-11 13:35:38 +01:00
Joost Jager
e9b7e80848
routing: remove path finding shortcut
This shortcut does not work when the destination is a private node. We
also don't have this shortcut for regular payments. This commit
aligns the behavior between SendPayment and QueryRoutes.
2020-01-15 20:32:45 +01:00
Carla Kirk-Cohen
7d356458e3
Merge pull request #3843 from carlaKC/htlcnotifier-0-switcherrors
[htlcnotifier 1/4]: Introduce Internal Errors
2020-01-15 08:46:38 +02:00
Joost Jager
5de308c4b5
routerrpc: update final cltv delta default
The default was increased for the main sendpayment RPC in commit
d3fa9767a9729756bab9b4a1121344b265410b1a. This commit sets the
same default for QueryRoutes, routerrpc.SendPayment and
router.EstimateRouteFee.
2020-01-14 21:03:24 +01:00
carla
b5a2d75465
htlcswitch+routing: type check on ClearTextError
Update the type check used for checking local payment
failures to check on the ClearTextError interface rather
than on the ForwardingError type. This change prepares
for splitting payment errors up into Link and Forwarding
errors.
2020-01-14 15:07:42 +02:00
carla
102f9b003f
htlcswitch: add ClearTextError interface
This commit adds a ClearTextError interface
which is implemented by non-opaque errors that
we know the underlying wire failure message for.
This interface is implemented by ForwardingErrors,
because we can fully decrypt the onion blob to
obtain the underlying failure reason. This interface
will also be implemented by errors which originate
at our node in following commits, because we know
the failure reason when we fail the htlc.

The lnwire interface is un-embedded in the
ForwardingError struct in favour of implementing
this interface. This change is made to protect
against accidental passing of a ForwardingError
to the wire, where the embedded FailureMessage
interface will present as wire failure but
will not serialize properly.
2020-01-14 15:07:41 +02:00
Joost Jager
81bf6e15b3
routing+lnrpc: add missing query routes parameters 2020-01-14 11:21:31 +01:00
Olaoluwa Osuntokun
128be259a7
routing: use updated sphinx.NewOnionPacket method
In this commit, we update the routing package to use the new
`sphinx.NewOnionPacket` method. The new version of this method allows us
to specify _how_ the packet should be filled before it's used to create
a mix-header. This isn't a fundamental change (totally backwards
compatible), instead it plugs a privacy leak that may have revealed to
the destination how long the true route was.
2020-01-07 16:11:39 -08:00
Joost Jager
72a6383975
routing: use absolute final expiry in pathfinding 2019-12-20 11:00:00 +01:00
Joost Jager
95ddab57fa
channeldb: add tx argument for FetchLightningNode
To allow execution within an existing tx.
2019-12-20 10:17:01 +01:00
Joost Jager
37d9ee302c
channeldb: take serialized key to fetch lightning node
This prevents inefficient key conversions in a follow up commit that
change the inner pathfinding loop.
2019-12-19 12:44:00 +01:00
Conner Fromknecht
f868bc128b
rpcserver+routerrpc: thread features + payment addr to SendPayment 2019-12-18 23:56:59 -08:00
Conner Fromknecht
495ae8ca42
routing: consolidate final hop params for newRoute
This commit creates a wrapper struct, grouping all parameters that
influence the final hop during route construction. This is a preliminary
step for passing in the receiver's invoice feature bits, which will be
used to select an appropriate payment or payload type.
2019-12-18 23:55:08 -08:00
Joost Jager
d85f378aa2
routing: move zero hops check 2019-12-16 14:53:47 +01:00
Joost Jager
d02de70d20
multi: do not use tlv.Record outside wire format handling
This commit prepares for more manipulation of custom records. A list of
tlv.Record types is more difficult to use than the more basic
map[uint64][]byte.

Furthermore fields and variables are renamed to make them more
consistent.
2019-12-12 00:14:58 +01:00
Joost Jager
b6eb3a69ba
routing+lnrpc+lncli: allow setting min htlc policy 2019-12-11 00:17:08 +01:00
Johan T. Halseth
8755a35860
Merge pull request #3667 from cfromknecht/log-fixes
fundingmanager+routing log touch ups
2019-11-20 15:57:05 +01:00
Joost Jager
a00a360018
Merge pull request #3739 from joostjager/incoming-restriction
routing: last hop restriction
2019-11-19 08:38:33 +01:00
Joost Jager
f28941c7e4
routing+routerrpc+lncli: enable last hop restriction for payments 2019-11-18 21:03:03 +01:00
nsa
929167b9af
routing: fix race condition when resuming payments 2019-11-15 14:44:05 -05:00
Olaoluwa Osuntokun
863d795c94
Merge pull request #3616 from Crypt-iQ/router_race_1019
ticker: add tickerMtx to prevent data race
2019-11-05 19:47:18 -08:00
Conner Fromknecht
0035e8b99d
routing/router: fix double hex encoding of target pubkey 2019-11-05 15:04:24 -08:00
nsa
b392dd1b95
routing: move statTicker to prevent race condition 2019-11-02 13:55:41 -04:00
Joost Jager
729c3a6bd6
routing: use unified policy for build route 2019-10-29 19:17:58 +01:00
Wilmer Paulino
0fc401de19
routing+routerrpc: take max cltv limit into account within path finding
With the introduction of the max CLTV limit parameter, nodes are able to
reject HTLCs that exceed it. This should also be applied to path
finding, otherwise HTLCs crafted by the same node that exceed it never
left the switch. This wasn't a big deal since the previous max CLTV
limit was ~5000 blocks. Once it was lowered to 1008, the issue became
more apparent. Therefore, all of our path finding attempts now have a
restriction of said limit in in order to properly carry out HTLCs to the
network.
2019-10-11 18:04:49 -04:00
Olaoluwa Osuntokun
6ebada112f
routing: update 3d party channel verification to use new chanvalidate package
In the process of moving to use the new package, we no longer need to
fetch the outpoint directly, and instead only need to pass the funding
transaction into the new verification logic.
2019-10-03 16:23:17 -07:00
Olaoluwa Osuntokun
18f88cbd8d
Merge pull request #3440 from joostjager/buildroute
routing: add build route functionality
2019-09-24 20:24:24 -07:00
Joost Jager
299821152a
routing+routerrpc: add BuildRoute function 2019-09-24 10:00:44 +02:00
Valentine Wallace
9a52cb6dab
multi: update internals to support updating max htlc
In this commit, we update the router and link to support users
updating the max HTLC policy for their channels. By updating these internal
systems before updating the RPC server and lncli, we protect users from
being shown an option that doesn't actually work.
2019-09-23 13:07:10 +02:00
Joost Jager
3d7de2ad39
multi: remove dead code 2019-09-10 17:21:59 +02:00
Joost Jager
ff0c5a0d5e
routing: process successes in mission control
This commit modifies paymentLifecycle so that it not only feeds
failures into mission control, but successes as well.
This allows for more accurate probability estimates. Previously,
the success probability for a successful pair and a pair with
no history was equal. There was no force that pushed towards
previously successful routes.
2019-08-23 09:15:41 +02:00
Olaoluwa Osuntokun
4697cfde30
routing: extend path finding to be TLV-EOB aware, allow dest TLV records
In this commit, we extend the path finding to be able to recognize when
a node needs the new TLV format, or the legacy format based on the
feature bits they expose. We also extend the `LightningPayment` struct
to allow the caller to specify an arbitrary set of TLV records which can
be used for a number of use-cases including various variants of
spontaneous payments.
2019-08-22 18:53:01 -07:00
Joost Jager
e7af6a077a
routing: convert to nillable failure reason
This commit converts several functions from returning a bool and a
failure reason to a nillable failure reason as return parameter. This
will take away confusion about the interpretation of the two separate
values.
2019-08-17 10:23:57 +02:00
Joost Jager
f1769c8c8c
routing: convert to node pair based
Previously mission control tracked failures on a per node, per channel basis.
This commit changes this to tracking on the level of directed node pairs. The goal
of moving to this coarser-grained level is to reduce the number of required
payment attempts without compromising payment reliability.
2019-08-13 19:21:37 +02:00
Joost Jager
7e7b620355
routing: persist mission control data 2019-07-31 08:44:00 +02:00
Joost Jager
b4a7665bae
routing: provide payment id to mission control 2019-07-29 09:38:32 +02:00
Joost Jager
334b6a3bfe
routing: move unreadable failure handling into mission control 2019-07-29 09:38:30 +02:00
Joost Jager
934ea8e78d
routing: move failure interpretation into mission control 2019-07-29 09:38:26 +02:00
Olaoluwa Osuntokun
8c389d13f9
Merge pull request #3197 from breez/optimize_prune_zombie_channels
Optimize prune zombie channels
2019-07-18 20:56:56 -07:00
Roei Erez
da9edc876a router: only prune disabled channels when AssumeChannelValid=true. 2019-07-18 17:05:20 +03:00
Joost Jager
34b264a3d8
routing: create PathFindingConfig for global parameters 2019-07-18 15:49:25 +02:00
Roei Erez
9781ea0082 router: Optimize pruneZombieChannels.
The current approach iterates all channels in the graph in order to
filter those in need. This approach is time consuming, several seconds
on my mobile device for ~40,000 channels, while during this time the
db is locked in a transaction.

The proposed change is to use an existing functionality that utilize the
fact that channel update are saved indexed by date. This method enables
us to go over only a small subset of the channels, only those that
were updated before the "channel expiry" time and further filter
them for our need.
The same graph that took several seconds to prune was pruned, after
the change, in several milliseconds.

In addition for testing purposes I added Initiator field to the
testChannel structure to reflect the channeldEdgePolicy direction.
2019-07-16 17:48:07 +03:00
Joost Jager
8055bcf2e0
routing: report failures to mission control directly
As there is no more state kept in the payment session, failure reporting
can go straight to mission control.
2019-07-13 22:38:25 +02:00
Joost Jager
dc13da5abb
routing: move second chance logic into mission control
If nodes return a channel policy related failure, they may get a second
chance. Our graph may not be up to date. Previously this logic was
contained in the payment session.

This commit moves that into global mission control and thereby removes
the last mission control state that was kept on the payment level.

Because mission control is not aware of the relation between payment
attempts and payments, the second chance logic is no longer based
tracking second chances given per payment.

Instead a time based approach is used. If a node reports a policy
failure that prevents forwarding to its peer, it will get a second
chance. But it will get it only if the previous second chance was
long enough ago.

Also those second chances are no longer dependent on whether an
associated channel update is valid. It will get the second chance
regardless, to prevent creating a dependency between mission control and
the graph. This would interfer with (future) replay of history, because
the graph may not be the same anymore at that point.
2019-07-13 22:38:23 +02:00
Joost Jager
d31efddf1b
routing: move generateBandwidthHints 2019-07-13 22:38:21 +02:00
Joost Jager
37e2751695
routing+routerrpc: isolate payment session source from mission control 2019-07-13 22:38:19 +02:00
Joost Jager
2726f50d7c
htlcswitch: do not consider unknown failures an error 2019-07-11 19:49:49 +02:00
Joost Jager
418fe364de
htlcswitch: use distinct error for unreadable failures 2019-07-11 19:49:45 +02:00
Joost Jager
2b47632b26
htlcswitch+routing+routerrpc: return error source as index 2019-07-11 10:37:26 +02:00
Olaoluwa Osuntokun
ba5fbb3c27
Merge pull request #3156 from joostjager/extended-fail
routerrpc: add more failure reasons and route hints
2019-07-08 19:12:03 -07:00
Joost Jager
ae46fb00cb
routing+channeldb: add more failure reasons 2019-07-04 09:27:12 +02:00
nsa
678fb674eb routing: move call to PruneGraph outside of the collating loop
This commit moves the call to PruneGraph outside of the loop
that collates all of the spentOutputs. With this change, if
a node has been offline for a long period of time, resyncing
with the chain no longer takes up as much memory (1MB vs 200MB
in some cases) or time. Previously, PruneGraph was called
for every block and allocated a very large map further down
in the pruneGraphNodes function. Now, pruneGraphNodes is only
called once.
2019-07-02 21:21:28 -04:00
Conner Fromknecht
3a4aba463b
routing+watchtower/wtclient: prints stats once per minute 2019-06-19 20:07:11 -07:00
Olaoluwa Osuntokun
5f4accd39f
Merge pull request #3195 from halseth/routeing-nil-copy-pubkey
routing+zpay32: copy pubkeys before nilling Curve and spewing
2019-06-18 17:19:25 -07:00
Conner Fromknecht
529db69ec9
routing/router: log aggregate graph processing stats 2019-06-13 18:18:30 -07:00
Johan T. Halseth
386f8ece54
routing+zpay32: copy pubkeys before nilling Curve and spewing
Since nilling the pubkey curve will lead to a nil-pointer exception if
the key is later used for signature verification, we make sure to make a
copy before nilling and spewing.
2019-06-12 12:19:43 +02:00
Wilmer Paulino
c4546081c3
Merge pull request #3172 from joostjager/sendtoroute-timeout
routing+lnrpc: move default payment timeout out of router
2019-06-11 16:27:19 -07:00
Johan T. Halseth
5485101f9f
Merge pull request #3170 from cfromknecht/remove-router-reject-cache
routing/router: remove router-level reject cache
2019-06-11 21:52:27 +02:00
Joost Jager
2e920de292
routing+lnrpc: move default payment timeout out of router
This commit moves the default timeout out of router and thereby fixes a
bug that caused SendToRoute to not return the actual error, but a
timeout result instead. SendToRoute only tries a single route, so a
timeout should never happen.
2019-06-11 08:36:17 +02:00
Johan T. Halseth
2dea790b55
multi: make GetPaymentResult take payment hash
Used for logging in the switch, and when we remove the pending payments,
only the router will have the hash stored across restarts.
2019-06-07 16:53:32 +02:00
Conner Fromknecht
f8db49e7e4
routing/router: remove router-level reject cache
This is now redundant since we have one at the db-level
2019-06-06 13:02:16 +02:00
Joost Jager
07d289c14e
routing: add SendPaymentAsync to router 2019-06-05 12:41:51 +02:00
Joost Jager
87d3207baf
channeldb+routing: move control tower interface to routing
This commit creates an empty shall for control tower in the routing
package. It is a preparation for adding event notification.
2019-06-05 12:41:47 +02:00
Joost Jager
19d5f8f82c
routing: move default cltv assignment out of router
This commit lifts default setting up to the rpc server level, in line
with other payment defaults.
2019-06-05 12:41:43 +02:00
Olaoluwa Osuntokun
7453dbeacc
Merge pull request #2802 from joostjager/probability
routing: probability based path finding
2019-06-05 11:30:55 +02:00
Johan T. Halseth
1161d87eec
routing/router: correct SendToRoute's amount record in DB
Previously we would mistakenly use the payment value from the dummy
LightningPayment struct, which would obviously be 0 always. Now we
instead calculate the value from the given route.
2019-06-04 10:13:33 +02:00
Joost Jager
7133f37bb8
routing: global probability based mission control
Previously every payment had its own local mission control state which
was in effect only for that payment. In this commit most of the local
state is removed and payments all tap into the global mission control
probability estimator.

Furthermore the decay time of pruned edges and nodes is extended, so
that observations about the network can better benefit future payment
processes.

Last, the probability function is transformed from a binary output to a
gradual curve, allowing for a better trade off between candidate routes.
2019-06-04 10:00:25 +02:00
Joost Jager
68f2a04f42
routerrpc: expose mission control reset rpc 2019-06-04 10:00:17 +02:00
Olaoluwa Osuntokun
4068e78af6
Merge pull request #2717 from cfromknecht/send-payment-payreq
lnrpc+rpcserver: display payreq via listpayments
2019-05-31 17:09:04 -07:00
Conner Fromknecht
078734b511
routing/router: set payreq before persisting PaymentCreationInfo 2019-05-29 16:31:12 -07:00
Joost Jager
cbfc7dd42d
routing: check findPath error 2019-05-29 14:07:00 +02:00
Joost Jager
0e273a5731
routing: return structured error for send to route 2019-05-29 14:06:58 +02:00
Johan T. Halseth
3f76bc0629
routing+server: define PaymentSessionSource 2019-05-27 20:18:59 +02:00
Johan T. Halseth
f4306b1178
routing/payment_session+router: make PaymentSession interface 2019-05-27 20:18:58 +02:00
Johan T. Halseth
adc4640f4f
routing: export MissionControl 2019-05-27 20:18:58 +02:00
Johan T. Halseth
3323800e02
routing/router: resume payment state machine at startup
On startup the router will fetch the in-flight payments from the control
tower, and resume their execution.
2019-05-27 20:18:58 +02:00
Johan T. Halseth
de1bf8a518
routing/router: persist payment state machine
This commit makes the router use the ControlTower to drive the payment
life cycle state machine, to keep track of active payments across
restarts.  This lets the router resume payments on startup, such that
their final results can be handled and stored when ready.
2019-05-27 20:18:58 +02:00
Johan T. Halseth
83bfaa4fb4
routing: extract payment flow into method on paymentLifecycle
This encapsulates all state needed to resume a payment from any point of
the payment flow, and that must be shared between the different stages
of the execution. This is done to prepare for breaking the send loop
into smaller parts, and being able to resume the payment from any point
from persistent state.
2019-05-27 20:18:57 +02:00
Johan T. Halseth
ae7bf2cb7b
routing/router: move sending and receiving payment result into loop 2019-05-27 20:18:57 +02:00
Wilmer Paulino
6e0084fec9
Merge pull request #3075 from cfromknecht/crtr-nil-path-curves
routing/router: nil path pubkeys before spewing
2019-05-23 20:01:54 -07:00
Johan T. Halseth
cd02c22977
htlcswitch+router: move deobfuscator creation to GetPaymentResult call
In this commit we move handing the deobfuscator from the router to the
switch from when the payment is initiated, to when the result is
queried.

We do this because only the router can recreate the deobfuscator after a
restart, and we are preparing for being able to handle results across
restarts.

Since the deobfuscator cannot be nil anymore, we can also get rid of
that special case.
2019-05-16 23:56:12 +02:00
Johan T. Halseth
5a8b892bb6
routing/router: extract sessionKey generation
We extract the session key such that we can later store it across
restarts.
2019-05-16 23:56:12 +02:00
Johan T. Halseth
ec087a9f73
htlcswitch+router: define PaymentResult, GetPaymentResult
This lets us distinguish an critical error from a actual payment result
(success or failure). This is important since we know that we can only
attempt another payment when a final result from the previous payment
attempt is received.
2019-05-16 23:56:12 +02:00
Johan T. Halseth
ed81cec0fa
routing/router: remove sendToSwitch method 2019-05-16 23:56:11 +02:00
Johan T. Halseth
c9e8ff6a34
switch+router+server: move NextPaymentID to router
This commit moves the responsibility of generating a unique payment ID
from the switch to the router. This will make it easier for the router
to keep track of which HTLCs were successfully forwarded onto the
network, as it can query the switch for existing HTLCs as long as the
paymentIDs are kept.

The router is expected to maintain a map from paymentHash->paymentID,
such that they can be replayed on restart. This also lets the router
check the status of a sent payment after a restart, by querying the
switch for the paymentID in question.
2019-05-16 23:56:06 +02:00
Johan T. Halseth
f1cb54f943
routing/router: define PaymentAttemptDispatcher interface
The switch satisfies this interface, and makes it easy to mock the send
method from the router.
2019-05-16 23:53:08 +02:00
Joost Jager
ba3fa94268
lnrpc+routing: Only accept a single route for SendToRoute 2019-05-15 11:54:46 +02:00
Conner Fromknecht
4d26e90ef3
routing/router: nil path pubkeys before spewing 2019-05-14 20:32:58 -07:00