Commit Graph

62 Commits

Author SHA1 Message Date
Johan T. Halseth
79341fc63e
contractcourt/chain_watcher: move log message
This move the log message "channel marked pending-closed" to the point
where the channel actually has been marked pending closed, instead of
before the database transaction has been done.
2018-05-02 08:43:30 +02:00
Johan T. Halseth
7e397067f6
contractcourt/chainwatcher: remove close observer for loop
This commit removes the for loop in the closeObserver, as it wasn't
serving any purpose. After receiving a spend notification we would
return, breaking out of the loop. When getting a quit signal we would
also return, making the loop only do one iteration in any case.
2018-05-02 08:43:30 +02:00
Johan T. Halseth
4320421110
contractcourt/chain_watcher: don't delete syncDispatch clients on Cancel()
This commit makes clients subscribing to channel events that are marked
"sync dispatch" _not_ being deleted from the list of clients when they
call Cancel(). Instead a go routine will be launched that will send an
error on every read of the ProcessACK channel.

This fixes a race in handing off the breach info while lnd was shutting
down. The breach arbiter could end up being shut down (and calling
Cancel()) before while the ChainWatcher was in the process of
dispatching a breach. Since the breach arbiter no longer was among the
registered clients at this point, the ChainWatcher would assume the
breach was handed off successfully, and mark the channel as pending
closed. When lnd now was restarted, the breach arbiter would not know
about the breach, and the ChainWatcher wouldn't attempt to re-dispatch,
as it was already marked as pending closed.
2018-04-25 09:37:26 +02:00
Johan T. Halseth
ddf62bbeea
contractcourt/channel_arbitrator: remove unused transationTrigger 2018-04-25 09:37:25 +02:00
Johan T. Halseth
b2949bd728
contractcourt/channel_arbitrator test: add unit tests
This commit adds MVP unit tests for the following scenarios in the
ChannelArbitrator:
1) A cooperative close is confirmed.
2) A remote force close is confirmed.
3) A local force close is requested and confirmed.
4) A local force close is requested, but a remote force close gets
confirmed.
2018-04-25 09:37:25 +02:00
Johan T. Halseth
84f06959f3
contractcourt/chain_arbitrator: remove CloseChannel method from ChannelArbitrator config 2018-04-25 09:37:25 +02:00
Johan T. Halseth
5f1da5b5f4
contractcourt/channel_arbitrator: remove unused CloseChannel method from config 2018-04-25 09:37:24 +02:00
Johan T. Halseth
70e8087731
contractcourt/channel_arbitrator: mark channel commitment broadcasted instead of closed after broadcast 2018-04-25 09:37:24 +02:00
Johan T. Halseth
854e73b8e0
contractcourt/chain_watcher: register for confirmed spend, mark closed when detected
This commit changes the ChainWatcher to only send a chain event in case
the various spends are _confirmed_ on-chain, not only seen on the
network.

A consequence of this is that we now give the ChainWatcher the
responsibility of marking the channel closed when the closing tx is
confirmed, instead of the ChannelArbitrator.
2018-04-25 09:37:24 +02:00
Johan T. Halseth
1265c9cc99
contractcourt/chain_arbitrator: add MarkCommitmentBroadcasted to ChanArb cfg 2018-04-25 09:37:24 +02:00
Johan T. Halseth
d2d87758f7
contractcourt/channel_arbitrator: only act on close signal from chain_watcher
This commit changes the channel arbitrator state machine to only care
about commitment transactions that are being confirmed on-chain
according to the chain_watcher. This is meant to handles the cases where
we would broadcast our commitment, expecting it to get confirmed, but
instead a competing transaction was confirmed.

This commit readies the ChannelArbitrator state machine for the change
that will make the ChainWatcher only notify on confirmed commitments.

The state machine has gotten a new state, StateCommitmentBroadcasted,
which we'll transition to after we have broadcasted our own commitment.
From this state we'll go to the StateContractClosed state regardless of
which commitment the ChainWatcher notifies about, unifying the contract
resolution betweee the local and remote force close.
2018-04-25 09:37:23 +02:00
Johan T. Halseth
a60e621b5f
contractcourt/channel_arbitrator: specify that height is triggerHeight, advance from height of event not current height 2018-04-25 09:37:23 +02:00
Johan T. Halseth
40b8cf0adb
contractcourt/channel_arbitrator: rename UnilateralClose -> RemoteUnilateralClose 2018-04-25 09:37:22 +02:00
Johan T. Halseth
49f4a70e5a
contractcourt/chain_watcher: add dispatchLocalForceClose
This commit adds a new method dispatchLocalClose, which will be called
in case our commitment is detected to spend the funding transaction. In
this case LocalUnilateralCloseInfo will be sent on the
LocalUnilateralClosure channel to all subscribers.

The UnilateralClosure channel is renamed to RemoteUnilateralClosure for
consistency.
2018-04-25 09:37:22 +02:00
Johan T. Halseth
7bacdd65dc
contractcourt: define StateCommitmentBroadcasted 2018-04-25 09:37:22 +02:00
Johan T. Halseth
24e8bace9c
contractcourt/channel_arbitrator: add missing return after forceClose request 2018-04-25 09:37:21 +02:00
Johan T. Halseth
0b2e6d1776
contractcourt/channel_arbitrator: removed unused bestHash parameter 2018-04-25 09:37:21 +02:00
Johan T. Halseth
9b9fada675
contractcourt: remove unecessary contractRes check
This commit removes a short circuit checking if the contract resolver
after a unilateral close is empty. After removing this, the state
machine will advance the state from StateDefault->ContractClosed, in
which the stateCallback will be called, logging the state needed to
advance. Since this logged state is empty, the state machine will go
directly to StateFullyResolved, which will trigger the
MarkChannelResolved call. This means the behaviour is kept.
2018-04-25 09:37:21 +02:00
Dimitris Tsapakidis
4009f7f874 multi: fix typos in comments 2018-04-17 19:03:27 -07:00
practicalswift
663c396235 multi: fix a-vs-an typos 2018-04-17 19:02:04 -07:00
Olaoluwa Osuntokun
09291d6aeb
contractcourt: ensure the closeObserver exits on quit 2018-04-16 17:28:48 -07:00
Olaoluwa Osuntokun
5f0d07e485
Merge pull request #1089 from halseth/resolvecontract-missing-return-on-exit
Add missing return on exit to resolveContract
2018-04-13 14:23:13 -07:00
Johan T. Halseth
c5169a79f5
contractcourt/channel_arbitrator: add missing return on resolver exit
This commit adds a missing return to the resolveContract method, that
will ensure the goroutine exits if the ChannelArbitrator shuts down.
This fixes a potential deadlock during the integration tests.

We also promote some of the logs to Debug from Trace.
2018-04-13 11:33:09 +02:00
Olaoluwa Osuntokun
aaa8fa33b1
contractcourt: when creating resolveContract closure don't bind to loop variable
In this commit, we fix a long standing bug where at times a co-op
channel closure wouldn't be properly marked as fully closed in the
database. The culprit was a re-occurring code flaw we've seen many times
in the codebase: a closure variable that closes over a loop iterator
variable. Before this instance, I assumed that this could only pop up
when goroutines bind to the loop iterator within a  closure. However,
this instance is the exact same issue, but within a regular closure that
has _delayed_ execution. As the closure doesn't execute until long after
the loop has finished executing, it may still be holding onto the _last_
item the loop iterator variable was assigned to.

The fix for this issue is very simple: re-assign the channel point
before creating the closure. Without this fix, we would go to call
db.MarkChanFullyClosed on a channel that may not have yet actually be in
the pending close state, causing all executions to fail.

Fixes #1054.
Fixes #1056.
Fixes #1075.
2018-04-12 18:54:33 -07:00
Olaoluwa Osuntokun
7a13378671
channeldb+contractcourt: add additional logging around co-op channel closes 2018-04-12 17:13:37 -07:00
Conner Fromknecht
218293db4a
contractcourt/chain_watcher: release mutex on return 2018-04-11 14:50:05 -07:00
Olaoluwa Osuntokun
bc029b9cd4
contractcourt: properly log error if unable to update chan close state 2018-04-10 16:55:32 -07:00
Johan T. Halseth
8e77e1e6eb
lnwallet/channel: add NewLocalForceCloseSummary
This commit renames ForceCloseSummary to LocalForceCloseSummary, and
adds a new method NewLocalForceCloseSummary that can be used to derive a
LocalForceCloseSummary if our commitment transaction gets confirmed
in-chain. It is meant to accompany the NewUnilateralCloseSummary method,
which is used for the same purpose in the event of a remote commitment
being seen in-chain.
2018-04-06 09:46:30 +02:00
Johan T. Halseth
8b02064c7b
multi: provide mempool=true to RegisterSpendNtfn 2018-04-03 11:24:07 +02:00
Olaoluwa Osuntokun
a0fe4fb716
Merge pull request #968 from halseth/chanarb-doublespend
contractcourt/channel_arbitrator: ignore ErrDoubleSpend on force close
2018-03-29 16:11:38 -07:00
Johan T. Halseth
d216416db8
contractcourt/channel_arbitrator: ignore ErrDoubleSpend on force close
This commit mitigates a problem within the ChannelArbitrator, where
after a restart we would start up in the state StateBroadcastCommit but
fail to broadcast out commitment because a conflicting transaction (most
likely our own commitment) was already broadcast. A more complete fix
for this case will be added later, but this commit let the
ChannelArbitrator continue, trying to close out the channel.
2018-03-29 11:15:41 +02:00
Johan T. Halseth
5bf5a823ff
contractcourt/chain_watcher: don't print curve of DoubleTweak 2018-03-29 11:11:54 +02:00
Olaoluwa Osuntokun
800eea931f
build+multi: switch from bolt to bbolt
In this commit, we switch from boltbd/bolt to coreos/bbolt as the
former is no longer being actively maintained.
2018-03-10 19:01:13 -08:00
Olaoluwa Osuntokun
dc2404f289
contractcourt: update test due to recent SignDescriptor API changes 2018-03-06 16:04:06 -05:00
Olaoluwa Osuntokun
4b20e805fe
multi: update packages due to recent SignDescriptor and WalletController changes 2018-03-06 16:04:03 -05:00
Johan T. Halseth
166637bb55
contractcourt: use vsize fee estimate and new fee rate types 2018-02-26 22:42:25 +01:00
Johan T. Halseth
2ae1b7dbbe
contractcourt: remove TODO for checking double spends from PublishTx 2018-02-14 12:34:41 +01:00
Daniel McNally
8543497dcc multi: fixing it's/its typos in comments 2018-02-06 19:13:07 -08:00
practicalswift
a93736d21e multi: comprehensive typo fixes across all packages 2018-02-06 19:11:11 -08:00
Olaoluwa Osuntokun
2099d6fa77
contractcourt: ensure we always cancel block epoch notifications after use
In this commit, we fix an existing grouting leak within the contract
court package. If a goroutine dies, but it doesn’t actually cancel the
block epoch notification that it requested, then it’s possible to leak
thousands of gorutines. To remedy this situation, we ensure that we’ll
*always* cancel the epoch notification once the goroutine has exited.
2018-02-05 14:41:08 -08:00
Olaoluwa Osuntokun
2d104b7ec0
test: wait for 2 transactions to enter mempool at the end of testMultiHopHtlcRemoteChainClaim
In this commit, we fix an existing flake on Travis related to the new
set of on-chain HTLC tests. In this timing flake, Bob would broadcast
his sweeping transaction, but *mid block mining*. As a result, the
output would never be properly swept, needing an additional block to be
mined. We’ll now wait for both Bob’s sweeping transaction, and Carol’s
sweep transaction to be confirmed before we attempt our assertions.
2018-01-23 19:05:36 -08:00
Olaoluwa Osuntokun
5dc0d669a6
contractcourt: watch proper output within htlcOutgoingContestResolver
In this commit, we fix an existing bug in the implementation of the
resolution of the htlcOutgoingContestResolver. Before this commit, we
would _always_ watch the claim outpoint. However, if this is on the
remote party’s commitment transaction, then we would end up watching
the wrong output. We’ll now properly detect this by modifying which
output we watch, based on if we have a second level transaction or not.
2018-01-23 14:16:22 -08:00
Olaoluwa Osuntokun
f8adab1f1c
test: add comprehensive integration tests for on-chain HTLC handling
In this commit, we add 6 new integration tests to test the various
actions that may need to be performed when either side goes on-chain to
fully resolve HTLC’s. Many of the tests are mirrors of each other as
they test sweeping/resolving HTLC’s from both commitment transactions.
2018-01-22 19:20:02 -08:00
Olaoluwa Osuntokun
73641d222f
contractcourt: properly use the broadcast state number during breach remedy 2018-01-22 19:19:58 -08:00
Olaoluwa Osuntokun
5df6704a9c
contractcourt: make synchronous chain watcher notifications optional
In this commit, we modify the way that notifications are dispatched
within the chainWatcher. Before we would *always* wait for an ack back
before we started to clean up he database state. This would at times
lead to deadlocks. To remedy this, we now allow callers to decide if
they want notifications to be sync or not. The only current caller that
requires this is the breach arbiter.
2018-01-22 19:19:58 -08:00
Olaoluwa Osuntokun
783f01e1c7
multi: fix linter warnings 2018-01-22 19:19:56 -08:00
Olaoluwa Osuntokun
91d45b37ba
contractcourt: on startup, launch a goroutine to finalize co-op chan close if needed 2018-01-22 19:19:54 -08:00
Olaoluwa Osuntokun
db2b9fd9ff
contractcourt: remove the existing ManuallyResolveChannel methiod
We’re removing this method as it’s no longer needed, since the
chainWatcher will properly handle on-chain co-op closes.
2018-01-22 19:19:54 -08:00
Olaoluwa Osuntokun
3ec83cc82f
peer+contractcourt: delegate watching for co-op closes to the chainWatcher
In this commit, we modify the interaction between the chanCloser
sub-system and the chain notifier all together. This fixes a series of
bugs as before this commit, we wouldn’t be able to detect if the remote
party actually broadcasted *any* of the transactions that we signed off
upon. This would be rejected to the user by having a “zombie” channel
close that would never actually be resolved.

Rather than the chanCloser watching for on-chain closes, we’ll now open
up a co-op close context to the chainWatcher (via a layer of
indirection via the ChainArbitrator), and report to it all possible
closes that we’ve signed. The chainWatcher will then be able to launch
a goroutine to properly update the database state once any of the
possible closure transactions confirms.
2018-01-22 19:19:53 -08:00
Olaoluwa Osuntokun
bbca53507f
contractcourt: extend the ChainArbitratorConfig with IsOurAddress closure
In this commit, we add the IsOurAddress field into the config of the
chain arb. With this new function closure, the chain arb is able to
detect co-op on chain closes automatically.
2018-01-22 19:19:53 -08:00