This is a preparation for enabling the REST interface on routerrpc.
It provides REST clients that don't support server-side streaming
via keep-alive connections to use the streaming endpoint in the
typical request/response pattern. The url just needs to contain
?no_inflight_updates=true and only the terminal response is sent
back before the connection is closed.
The message in the response stream changed. Rename the calls themselves,
to prevent older applications from getting decode errors. Especially
troublesome is the case where the request is executed (send payment),
but the application can't read the outcome (payment sent or not?)
In this commit, we remove the restriction surrounding the largest
invoices that we'll allow a user to create. After #3967 has landed,
users will be able to send in _aggregate_ a payment larger than the
current max HTLC size limit in the network. As a result, we can just
treat that value as the system's MTU, and allow users to request
payments it multiples of that MTU value.
A follow up to this PR at a later time will also allow wumbo _channels_.
However, that requires us to tweak the way we scale CSV values, as post
wumbo, there is no true channel size limit, only the
_local_ limit of a given node. We also need to implement a way for nodes
to signal to other nodes their accepted max channel size.
Modifies the payment session to launch additional pathfinding attempts
for lower amounts. If a single shot payment isn't possible, the goal is
to try to complete the payment using multiple htlcs. In previous
commits, the payment lifecycle has been prepared to deal with
partial-amount routes returned from the payment session. It will query
for additional shards if needed.
Additionally a new rpc payment parameter is added that controls the
maximum number of shards that will be used for the payment.
This commit fixes the inconsistency between the payment state as
reported by routerrpc.SendPayment/routerrpc.TrackPayment and the main
rpc ListPayments call.
In addition to that, payment state changes are now sent out for every
state change. This opens the door to user interfaces giving more
feedback to the user about the payment process. This is especially
interesting for multi-part payments.
We now use the jsonpb marshaler to convert the RPC responses to
JSON in lncli and REST. The jsonpb has a setting to use the
original name as defined in the proto file and the explicit
json_name definition is not necessary any more.
The jsonpb setting is called OrigName and needs to be true.
The default was increased for the main sendpayment RPC in commit
d3fa9767a9729756bab9b4a1121344b265410b1a. This commit sets the
same default for QueryRoutes, routerrpc.SendPayment and
router.EstimateRouteFee.
Update the type check used for checking local payment
failures to check on the ClearTextError interface rather
than on the ForwardingError type. This change prepares
for splitting payment errors up into Link and Forwarding
errors.
This commit adds a ClearTextError interface
which is implemented by non-opaque errors that
we know the underlying wire failure message for.
This interface is implemented by ForwardingErrors,
because we can fully decrypt the onion blob to
obtain the underlying failure reason. This interface
will also be implemented by errors which originate
at our node in following commits, because we know
the failure reason when we fail the htlc.
The lnwire interface is un-embedded in the
ForwardingError struct in favour of implementing
this interface. This change is made to protect
against accidental passing of a ForwardingError
to the wire, where the embedded FailureMessage
interface will present as wire failure but
will not serialize properly.
This commit prepares for more manipulation of custom records. A list of
tlv.Record types is more difficult to use than the more basic
map[uint64][]byte.
Furthermore fields and variables are renamed to make them more
consistent.
In this commitment, we make the `SendToRoute` RPC call consistent with
all the other payment RPCs which will properly adhere to the current max
payment sat limit. This is a prep commit for the future wumbo soft cap
that will eventually land in lnd.
This commit modifies the FetchPayment method to return MPPayment structs
converted from the legacy on-disk format. This allows us to attach the
HTLCs to the events given to clients subscribing to the outcome of an
HTLC.
This commit also bubbles up to the routerrpc/router_server, by
populating HTLCAttempts in the response and extracting the legacy route
field from the HTLCAttempts.
This commit parses mpp_total_amt_msat and mpp_payment_addr from the
SendToRoute rpc and populates an MPP record on the internal hop
reprsentation. When the router goes to encode the onion packet, these
fields will be serialized for the destination. We also populate the mpp
fields when marshalling routes in rpc responses.
Probabilities are no longer returned for querymc calls. To still provide
some insight into the mission control internals, this commit adds a new
rpc that calculates a success probability estimate for a specific node
pair and amount.
With a separate proto message, it becomes possible to also return the
pair data for a single pair. This prepares for the new mc probability
querying rpc.
This commit changes mission control to partially base the estimated
probability for untried connections on historical results obtained in
previous payment attempts. This incentivizes routing nodes to keep all
of their channels in good shape.
Probability estimates are amount dependent. Previously we assumed an
amount, but that starts to make less sense when we make probability more
dependent on amounts in the future.
This sets the `jstype` option to `JS_STRING` for all `chan_id` fields
in the proto rpc definition. `chan_id` is a 64 bit integer, which is
not natively supported by javascript's floating-point `number` with
only 52 bit precision. Nevertheless, by default protobuf will use the
`number` type for 64 bit integer fields in javascript, which can cause
loss of precision problems with `chan_id`. Explicitly setting the type
for javascript as a string will prevent these issues, and should not
interfere with its use as an identifier.
With the introduction of the max CLTV limit parameter, nodes are able to
reject HTLCs that exceed it. This should also be applied to path
finding, otherwise HTLCs crafted by the same node that exceed it never
left the switch. This wasn't a big deal since the previous max CLTV
limit was ~5000 blocks. Once it was lowered to 1008, the issue became
more apparent. Therefore, all of our path finding attempts now have a
restriction of said limit in in order to properly carry out HTLCs to the
network.
In order to prevent future unforeseen issues, we are temporarily
disabling the ability to send custom tlv records to the receiver of a
payment. Currently the receiver does not process or expose these
additional fields via rpc or internally, so they are being disabled
until the end-to-end flow is finished and fully validated.
Extends the invalid payment details failure with the new accept height
field. This allows sender to distinguish between a genuine invalid
details situation and a delay caused by intermediate nodes.
This commit modifies paymentLifecycle so that it not only feeds
failures into mission control, but successes as well.
This allows for more accurate probability estimates. Previously,
the success probability for a successful pair and a pair with
no history was equal. There was no force that pushed towards
previously successful routes.
In this commit, we add a new field to the Hop proto to allow callers to
be able to specify TLV records for the SendToRoute call, and also to be
able to display TLV records that were used during regular path finding.
We also update SendPayment to support dest TLV records.
Previously mission control tracked failures on a per node, per channel basis.
This commit changes this to tracking on the level of directed node pairs. The goal
of moving to this coarser-grained level is to reduce the number of required
payment attempts without compromising payment reliability.
Align naming better with the lightning spec. Not the full name of the
failure (FailIncorrectOrUnknownPaymentDetails) is used, because this
would cause too many long lines in the code.
This commit exposes the three main parameters that influence mission
control and path finding to the user as command line or config file
flags. It allows for fine-tuning for optimal results.
Previously every payment had its own local mission control state which
was in effect only for that payment. In this commit most of the local
state is removed and payments all tap into the global mission control
probability estimator.
Furthermore the decay time of pruned edges and nodes is extended, so
that observations about the network can better benefit future payment
processes.
Last, the probability function is transformed from a binary output to a
gradual curve, allowing for a better trade off between candidate routes.
This PR replaces the previously used edge and node ignore lists in path
finding by a probability based system. It modifies path finding so that
it not only compares routes on fee and time lock, but also takes route
success probability into account.
Allowing routes to be compared based on success probability is achieved
by introducing a 'virtual' cost of a payment attempt and using that to
translate probability into another cost factor.
