Commit Graph

106 Commits

Author SHA1 Message Date
Wilmer Paulino
c82d73a826
channeldb+routing: extend edge lookup methods with zombie index check
In this commit, we extend the graph's FetchChannelEdgesByID and
HasChannelEdge methods to also check the zombie index whenever the edge
to be looked up doesn't exist within the edge index. We do this to
signal to callers that the edge is known, but only as a zombie, and the
only information that we have about the edge are the node public keys of
the two parties involved in the edge.

In the event that an edge does exist within the zombie index, we make
an additional check on edge policies to ensure they are not within the
router's pruning window, indicating that it is a fresh update.
2019-03-27 13:06:57 -07:00
Wilmer Paulino
e98f4d6d9d
channeldb: extend DeleteChannelEdge to mark edge as zombie
We mark the edges as zombies when pruning them to ensure we don't
attempt to reprocess them later on. This also applies to channels that
have been removed from the graph due to being stale.
2019-03-27 13:06:34 -07:00
Wilmer Paulino
b780dfacdb
channeldb: add zombie edge index
In this commit, we add a zombie edge index to the database. This allows
us to quickly determine across restarts whether we're attempting to
process an edge we've previously deemed as zombie.
2019-03-27 13:06:12 -07:00
Wilmer Paulino
a26a643273
channeldb: remove unused buckets 2019-03-27 13:05:48 -07:00
Olaoluwa Osuntokun
3555d3dbd4 channeldb: convert all Update calls to use Batch
In this commit, we convert all the `Update` calls which are serial, to
use `Batch` calls which are optimistically batched together for
concurrent writers. This should increase performance slightly during the
initial graph sync, and also updates at tip as we can coalesce more of
these individual transactions into a single transaction.
2019-03-19 17:10:46 -07:00
Olaoluwa Osuntokun
c656788b0b
channeldb: add new methods to allow adding a new edge+policy w/ existing db transaction 2019-01-28 20:24:38 -08:00
Johan T. Halseth
7d34ce9d08
lnwire+multi: define HasMaxHtlc helper on msgFlags 2019-01-22 08:42:30 +01:00
Johan T. Halseth
6fcc76fc68
channeldb/channel: ignore ChannelEdgePolicy with missing max_htlc
If the max_htlc field is not found when fetching a ChannelEdgePolicy
from the DB, we treat this as an unknown policy.

This is done to ensure we won't propagate invalid data further. The data
will be overwritten with a valid one when we receive an update for this
channel.

It shouldn't be very common, but old data could be lingering in the DB
added before this field was validated.
2019-01-22 08:42:28 +01:00
Valentine Wallace
69d4bf051f
channeldb/graph: add max HTLC to ChannelEdgePolicy
Adding this field will allow us to persist an edge's
max HTLC to disk, thus preserving it between restarts.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2019-01-22 08:42:27 +01:00
Johan T. Halseth
b9c5248915
channeldb/graph: extract ChannelEdgePolicy serialization 2019-01-22 08:42:27 +01:00
Johan T. Halseth
91c9e45031
channeldb/graph: check correct bucket for nilness 2019-01-22 08:42:27 +01:00
Valentine Wallace
0fd6004958
multi: partition lnwire.ChanUpdateFlag into ChannelFlags and MessageFlags
In this commit:

* we partition lnwire.ChanUpdateFlag into two (ChanUpdateChanFlags and
ChanUpdateMsgFlags), from a uint16 to a pair of uint8's

* we rename the ChannelUpdate.Flags to ChannelFlags and add an
additional MessageFlags field, which will be used to indicate the
presence of the optional field HtlcMaximumMsat within the ChannelUpdate.

* we partition ChannelEdgePolicy.Flags into message and channel flags.
This change corresponds to the partitioning of the ChannelUpdate's Flags
field into MessageFlags and ChannelFlags.

Co-authored-by: Johan T. Halseth <johanth@gmail.com>
2019-01-22 08:42:26 +01:00
Johan T. Halseth
70aeda1589
channeldb/graph: don't create node bucket in PruneGraph
Instead return ErrSourceNodeNotSet directly. This would be returned from
the call pruneGraphNodes -> sourceNode anyway.
2018-12-06 10:22:16 +01:00
Johan T. Halseth
9d467d3534
channeldb/graph: reuse nodes bucket in deleteLightningNode
Lets us avoid passing the tx from pruneGraphNodes
2018-12-06 10:22:16 +01:00
Johan T. Halseth
1b9ca06563
channeldb/graph: reuse nodes bucket when fetchin source node 2018-12-06 10:22:16 +01:00
Johan T. Halseth
86d40636cd
channeldb/graph: don't create bucket in delEdgeUpdateIndexEntry
We are deleting what's in the bucket, so if it doesn't exist, just
return early with a non-error.
2018-12-06 10:22:16 +01:00
Johan T. Halseth
84de318553
channeldb/graph: don't create bucket in UpdateEdgePolicy
instead return ErEdgeNotFound, which would be returned anyway when
querying the edgeIndex for the channel.
2018-12-06 10:22:15 +01:00
Johan T. Halseth
9722323161
channeldb/graph: don't create node bucket in DeleteChannelEdge
Instead return ErrGraphNodeNotFound directly. If the node bucket was
created it would be empty, and the call delChannelByEdge ->
fetchChanEdgePolicies -> fetchChanEdgePolicy ->
deserializeChanEdgePolicy -> fetchLightningNode would return this error
anyway.
2018-12-06 10:22:15 +01:00
Johan T. Halseth
351f4aab79
channeldb/graph: don't create buckets in DeleteChannelEdge
Instead return ErrEdgeNotFound if buckets don't exist. This would be
returned anyway, when the chanIndex is checked for the channel point in
question.
2018-12-06 10:22:15 +01:00
Johan T. Halseth
5d8d99b7bc
channeldb/graph: don't create bucket in UpdateChannelEdge
It would return ErrEdgeNotFound when edge not found in bucket anyway.
2018-12-06 10:22:15 +01:00
Johan T. Halseth
81fe6e73ed
router+graph: return ErrGraphNodesNotFound if no nodes to prune
Avoids creating a bucket unneccessarily.
2018-12-06 10:22:15 +01:00
Johan T. Halseth
3d7bbd6d72
channeldb/graph: write max 80 sig len for nodes 2018-12-05 09:31:26 +01:00
Olaoluwa Osuntokun
1fd3aac925
multi: switch from bolt packge to bbolt package for all imports 2018-11-29 20:33:49 -08:00
Wilmer Paulino
e795f7fce4
channeldb/graph: add method to determine if a node is public
In this commit, we add a method to the ChannelGraph struct that
determines whether a node is seen as public based on graph's source
node's point of view.
2018-10-24 17:28:53 -07:00
Wilmer Paulino
28cf413055
channeldb: add method to retrieve a node's node announcement 2018-10-23 18:42:25 -07:00
Olaoluwa Osuntokun
d2a7d910b7
Merge pull request #1825 from Roasbeef/extra-gossip-message-data
channeldb+discovery: ensure we store, validate and propagate announcements with opaque data
2018-09-05 17:53:02 -07:00
Olaoluwa Osuntokun
785efcfaa2
channeldb: also ignore the EOF error when trying to read ExtraOpaqueBytes
In this commit, we account for the additional case wherein the
announcement hasn't yet been written with the extra zero byte to
indicate that there aren't any remaining bytes to be read. Before this
commit, we accounted for the case where the announcement was written
with the extra byte, but now we ensure that legacy nodes that upgrade
will be able to boot properly.
2018-09-05 16:42:23 -07:00
Olaoluwa Osuntokun
16b5a67c3a
Merge pull request #1842 from wpaulino/dedup-chan-updates-horizon
channeldb: dedup channel edges returned from ChanUpdatesInHorizon
2018-09-04 21:24:40 -07:00
Olaoluwa Osuntokun
48072f8e82
channeldb: add limit on the max number of opaque bytes per announcement
In this commit, we add a new limit on the largest number of extra opaque
bytes that we'll allow to be written per vertex/edge. We do this in
order to limit the amount of disk space that we expose, as it's possible
that nodes may start to pad their announcements adding an additional
externalized cost as nodes may need to continue to store and relay these
large announcements.
2018-09-04 20:52:45 -07:00
Olaoluwa Osuntokun
f5c582d8d7
channeldb: add new ExtraOpaqueData to edge policy+update and node ann
In this commit, we add a mirror set of fields to the ones we recently
added to the set of gossip wire messages. With these set of fields in
place, we ensure that we'll be able to properly store and re-validate
gossip messages that contain a set of extra/optional fields.
2018-09-04 20:52:43 -07:00
Wilmer Paulino
3f58c2dea4
channeldb/graph: dedup channel edges returned from ChanUpdatesInHorizon
In this commit, we ensure that we de-duplicate the set of channel edges
returned from ChanUpdatesInHorizon. Other subsystems within lnd use this
method to retrieve and send all the channels with updates within a time
series to network peers. However, since the method looks at the edge
update index, which can include up to two entries per edge for each
policy, it's possible that we'd send channel announcements and updates
twice, causing extra bandwidth.
2018-09-04 18:48:21 -07:00
Wilmer Paulino
2f22e6c35f
channeldb/graph: properly determine old update timestamp for an edge
In this commit, we fix a lingering issue within the edge update index
where entries were not being properly pruned due to an incorrect
calculation of the offset of an edge's last update time. Since the
offset is being determined from the end to the start, we need to
subtract all the fields after an edge policy's last update time from the
total amount of bytes of the serialized edge policy to determine the
correct offset. This was also slightly off as the edge policy included
an extra byte, which has been fixed in the previous commit.

Instead of continuing the slicing approach however, we'll switch to
deserializing the raw bytes of an edge's policy to ensure this doesn't
happen in the future when/if the serialization methods change or extra
data is included.
2018-09-04 18:33:38 -07:00
Wilmer Paulino
492d581df6
channeldb/graph: fix off-by-one public key slice
In this commit, we fix an off-by-one error when slicing the public key
from the serialized node info byte slice. This would cause us to write
an extra byte to all edge policies. Even though the values were read
correctly, when attempting to calculate the offset of an edge's update
time going backwards, we'd always be incorrect, causing us to not
properly prune the edge update index.
2018-09-04 18:31:38 -07:00
Wilmer Paulino
06344da62e
channeldb/graph: refactor UpdateEdgePolicy to use existing db transaction 2018-09-04 18:31:37 -07:00
Wilmer Paulino
aa3e2b6ba4
channeldb/graph: identify edge chan id on failure 2018-09-04 18:31:36 -07:00
Olaoluwa Osuntokun
9353ab00b1
channeldb: ensure that we remove update index entries for nodes upon deletion 2018-08-16 18:22:55 -07:00
Olaoluwa Osuntokun
90cdc9da8f
channeldb: add String() method for EdgePoint
In this commit we fix a minor logging artifact. After the switch to
EdgePoint, the FilteredChainView implementations will try to log the
struct directly, as prior they would have an outpoint object. We restore
this behavior by adding a String() method to EdgePoint which will simply
proxy through to the outpoint so we can log that directly.
2018-08-15 21:43:39 -07:00
Olaoluwa Osuntokun
0f3c0ccf85
channeldb: add new FetchOtherNode method to ChannelEdgeInfo
In this commit, we add a new method to the ChannelEdgeInfo that will
allow the path finding logic to get the node opposite the pivot node
without first creating a new db transaction. The new method is able to
use an existing db transaction, or create a new one if needed.
2018-08-09 20:47:01 -07:00
Olaoluwa Osuntokun
ce7bfae4f7
channeldb: ensure we always check error from fetchChanEdgePolicy 2018-08-09 20:46:04 -07:00
Olaoluwa Osuntokun
0109672835
channeldb: add new db field for ChannelEdgeInfo to allow new methods 2018-08-09 20:45:39 -07:00
Joost Jager
6c918a1806 channeldb: store unknown policies in database
The commit ensures that for every channel, there will always
be two entries in the edges bucket. If the policy from one or
both ends of the channel is unknown, it is marked as such.

This allows efficient lookup of incoming edges. This is
required for backwards payment path finding.
2018-08-09 20:23:40 -07:00
Conner Fromknecht
cf2c371042
multi: fix linting errors 2018-08-02 18:20:50 -07:00
Olaoluwa Osuntokun
d129e7c890
channeldb: update ChannelView to return new EdgePoint struct
In this commit, we update the ChannelView method to be compatible with
the new set of interfaces that require the script to be passed in in
addition to the outpoint. In order to do this, we introduce a new
EdgePoint struct which packages together a channel point along with the
funding pkScript. Along the way, we've copied over a utility method from
the lnwallet package to avoid having to deal with an import cycle.
2018-07-31 21:28:54 -07:00
Olaoluwa Osuntokun
2e75499787
channeldb+routing: move adding shell nodes into db txn of AddChannelEdge
In this commit, we fix a slight race condition that can occur when we go
to add a shell node for a node announcement, but then right afterwards,
a new block arrives that causes us to prune an unconnected node. To
ensure this doesn't happen, we now add shell nodes within the same db
transaction as AddChannelEdge. This ensures that the state is fully
consistent and shell nodes will be added atomically along with the new
channel edge.

As a result of this change, we no longer need to add shell nodes within
the ChannelRouter, as the database will take care of this operation as
it should.
2018-07-22 21:02:53 -07:00
Olaoluwa Osuntokun
8519ea869d
channeldb: add logging for nodes pruned from the channel graph 2018-07-22 21:00:51 -07:00
Olaoluwa Osuntokun
6bf15e8f2b
channeldb: fix bug in pruneGraphNodes by switching to using ref counting
In this commit, we fix an existing bug in the pruneGraphNodes method.
Before this commit, if a node was involved in a channel, but only one of
the edges was advertised, then either it, or the other node would be
erroneously pruned from the graph. They shouldn't be pruned as there's
still an edge connecting the, although only 1/2 of the edge is actually
advertised.

In order to fix this, we'll now do two passes: the first pass will
populate a ref count map of all known nodes in the graph, the second
pass will increment the ref count each time a node is found in the
graph. With this two pass method, we ensure that nodes are only deleted
if there are absolutely no edges pointing to them within the graph.
2018-07-22 18:59:36 -07:00
Olaoluwa Osuntokun
0645261e5e
channeldb: add nwe PruneGraphNodes method to prune unconnected nodes 2018-07-21 19:49:59 -07:00
Olaoluwa Osuntokun
3a465c64b5
channeldb: modify pruneGraphNodes to prune nodes if no edges exist 2018-07-21 19:49:16 -07:00
Wilmer Paulino
0e4d350e56
channeldb: prune nodes with no open channels left from the graph 2018-07-17 17:35:29 -07:00
Wilmer Paulino
959618d596
channeldb: refactor methods to allow using existing db transaction 2018-07-17 17:35:26 -07:00