Commit Graph

407 Commits

Author SHA1 Message Date
Conner Fromknecht
c2055d4a9e
htlcswitch/circuit_map: relax circuit deletion
Previously, we would only allow deletion of circuits if all circuit keys
were found in the pending map.

In this commit, we relax this to allow for deletion of any circuits
that are found pending, and ignore those that are not found. This
is a preliminary step to cleaning up duplicate forwards that get caught
by the switch. It also allows us to gracefully handle any nodes that
are still afflicted by the split mailbox issue.
2018-08-20 16:45:42 -07:00
Conner Fromknecht
0372bf9319
htlcswitch/circuit_map: prevent spewing secp curve in trace
Replaces the log statement in CommitCircuits so that
it prints the circuit key of the incoming channel. This way
we avoid spewing the secp curve stored in the ErrorEncrypter.
2018-08-20 16:45:42 -07:00
Conner Fromknecht
48b616629a
htlcswitch/switch: remove unnecessary defer closure 2018-08-18 20:19:17 -07:00
Conner Fromknecht
9047eee2f1
htlcswitch/switch: adds concrete ErrSwitchExisting 2018-08-18 20:19:17 -07:00
Conner Fromknecht
0d49a60924
htlcswitch/switch: remove go-errors pkg 2018-08-18 20:19:17 -07:00
Johan T. Halseth
887722f38f
htlcswitch/switch: add method HasActiveLink 2018-08-17 23:24:12 +02:00
Olaoluwa Osuntokun
7a113d469b
Merge pull request #1551 from cfromknecht/switch-revert-replace-link
[htlcswitch]: revert replace link, ensure removed links are stopped
2018-08-13 21:44:42 -07:00
Conner Fromknecht
f84cd14b12
htlcswitch/switch: permit link shutdown mid-forwarding
In this commit, we thread through a link's quit channel into
routeAsync, the primary helper method allowing links to send
htlcPackets through the switch. This is intended to remove
deadlocks from happening, where the link is synchronously
blocking on forwarding packets to the switch, but also
needs to shutdown.
2018-08-10 11:42:26 -07:00
Conner Fromknecht
0fef1c71fe
htlcswitch/link: pass link quit to ForwardPackets 2018-08-10 11:42:26 -07:00
Conner Fromknecht
d08003b285
htlcswitch/link_test: adds TestChannelLinkShutdownDuringForward
This commit adds a test that verifies Stop does not block
if the link is concurrently forwarding incoming Adds to
the switch. This test fails prior to the commits that
thread through the link's quit channel.
2018-08-10 11:42:26 -07:00
Conner Fromknecht
11f02de3b3
htlcswitch/link_test: removes unnecessary WaitForShutdown
The new RemoveLink method blocks until the link has
been fully stopped, so we no longer need to wait
for it explicitly.
2018-08-10 11:42:25 -07:00
Conner Fromknecht
b507d265b4
htlcswitch/link: only update contract signals on start if live link 2018-08-10 11:42:25 -07:00
Conner Fromknecht
c78e81d32b
htlcswitch/switch: synchronous stop of links after removal 2018-08-10 11:42:25 -07:00
Conner Fromknecht
258019eb24
htlcswitch/switch_test: update reverted test to use...
current initialization methods
2018-08-10 11:42:24 -07:00
Conner Fromknecht
1113684dc3
Revert "htlcswitch: in event of duplicate link add, prefer newer link"
This reverts commit e60d2b774a35e446081f9be2d4901925cac05379.
2018-08-10 11:42:20 -07:00
Valentine Wallace
1ffc3bb82e
multi: update to latest RegisterBlockEpochNtfn interface 2018-08-10 01:08:57 -07:00
Olaoluwa Osuntokun
518b0d2cf7
Merge pull request #1679 from cfromknecht/move-linter-v2
Makefile: move linter v2
2018-08-09 21:03:05 -07:00
Olaoluwa Osuntokun
d3b1b9aa98
Merge pull request #1668 from cfromknecht/interface-tickers
Ticker Package
2018-08-09 20:55:25 -07:00
Wilmer Paulino
9d2eeb6304
multi: update to latest fee estimation interface 2018-08-09 17:29:52 -07:00
Conner Fromknecht
c90ec19595
htlcswitch/test_utils: repalce mockTicker with new MockTicker 2018-08-09 02:48:07 -07:00
Conner Fromknecht
6a709526d8
htlcswitch/mock: remove mockTicker, use ticker.MockNew 2018-08-09 02:48:07 -07:00
Conner Fromknecht
2651136806
htlcswitch/link_test: replace mockTicker with ticker.Mock 2018-08-09 02:48:07 -07:00
Conner Fromknecht
e3253a4f3b
htlcswitch/switch: add log/fwd event tickers to Config 2018-08-09 02:48:07 -07:00
Conner Fromknecht
1c456a5144
htlcswitch/link: replace batch ticker with...
resumable ticker.Ticker interface
2018-08-09 02:48:06 -07:00
Conner Fromknecht
b608fca447
htlcswitch/circuit_test: use CircuitKey field names 2018-08-07 16:57:40 -07:00
Conner Fromknecht
cf2c371042
multi: fix linting errors 2018-08-02 18:20:50 -07:00
Conner Fromknecht
1ded697e8d
multi: sort import paths with gofmt 2018-08-02 18:20:49 -07:00
Olaoluwa Osuntokun
53416260e3
htlcswitch: update test to account for new ChainNotifier API 2018-07-31 21:28:58 -07:00
Olaoluwa Osuntokun
3268019326
htlcswitch: update mock notifier due to recent API changes 2018-07-31 21:28:50 -07:00
Olaoluwa Osuntokun
1e39cfc65f
Merge pull request #1364 from halseth/data-loss-protect
Data loss protection
2018-07-31 20:53:42 -07:00
Johan T. Halseth
ebed786b2a
htlcswitch/link: inspect sync errors, force close channel
This commit makes the link inspect the error encountered during channel
sync, force closing the channel if we detect a remote data loss.
2018-07-31 15:16:23 +02:00
Johan T. Halseth
22e21da370
htlcswitch tests: add missing OnChannelFailure to test link configs 2018-07-31 08:27:03 +02:00
Conner Fromknecht
3ed2241a94
htlcswitch/link_test: only pass duration to NewBatchTicker 2018-07-30 22:33:37 -07:00
Conner Fromknecht
5af19bb2b4
htlcswitch/link: reusable BatchTicker
This commit modifies the default BatchTicker
implementation such that it will generate a
new ticker with each call to Start(). This
allows us to create a new ticker after
releasing an old one due to the batch
being empty.
2018-07-30 22:33:37 -07:00
Conner Fromknecht
bd9a6bd625
htlcswitch/link: conditional batch ticker
In this commit, we prevent the htlcManager from
being woken up by the batchTicker when there is no
work to be done. Profiling has shown a significant
portion of CPU time idling, since the batch ticker
endlessly demands resources. We resolve this by only
selecting on the batch ticker when we have a
non-empty batch of downstream packets from the
switch.
2018-07-30 21:44:49 -07:00
Conner Fromknecht
d76bacee0e
htlcswitch/link: send FailFinalExpiryTooSoon from exit hop
This commit corrects our exit hop logic to return
FailFinalExpiryTooSoon if the following check is true:
   pd.Timeout-expiryGraceDelta <= heightNow

Previously we returned FailFinalIncorrectCltvExpiry, which
should only be returned if the packet was misconstructed.
2018-07-27 15:52:09 -07:00
Conner Fromknecht
982a09ac60
htlcswitch/link_test: check for FailFinalExpiryTooSoon 2018-07-27 15:50:00 -07:00
Conner Fromknecht
a5e841c6b7
htlcswitch/hodl/config_production: hide cli hodl flags in prod
This commit replaces the debug Config struct with an empty
one, so that the command line flags are hidden in production
builds.

Production help before commit:

Tor:
      --tor.active
      --tor.socks=
      --tor.dns=
      --tor.streamisolation
      --tor.control=
      --tor.v2
      --tor.v2privatekeypath=
      --tor.v3

hodl:
      --hodl.exit-settle
      --hodl.add-incoming
      --hodl.settle-incoming
      --hodl.fail-incoming
      --hodl.add-outgoing
      --hodl.settle-outgoing
      --hodl.fail-outgoing
      --hodl.commit
      --hodl.bogus-settle

Help Options:
  -h, --help

Production help after commit:

Tor:
      --tor.active
      --tor.socks=
      --tor.dns=
      --tor.streamisolation
      --tor.control=
      --tor.v2
      --tor.v2privatekeypath=
      --tor.v3

Help Options:
  -h, --help
2018-07-25 03:33:36 -07:00
Conner Fromknecht
0df2bcd18c
htlcswitch/hodl/config_debug: only expose hodl flags in debug
This commit places hodl command line flags behind the debug flag,
so that they're only accessible during testing builds.
2018-07-25 03:30:12 -07:00
Johan T. Halseth
d7b2977e8c
multi test: remove mempool bool from RegisterSpendNtfn 2018-07-22 23:09:08 +02:00
Wilmer Paulino
3ab17063ff
multi: satisfy new lnpeer interface 2018-07-19 12:32:29 -07:00
Olaoluwa Osuntokun
6f60f139f4 multi: switch over import paths from roasbeef/* to btcsuite/* 2018-07-13 17:05:39 -07:00
Olaoluwa Osuntokun
a32f2b79da
htlcswitch: modify the InvoiceDatabase interface to allow specifying final payment amt
In this commit, we modify the InvoiceDatabase slightly to allow the link
to record what the final payment about for an invoice was. It may be the
case that the invoice actually had no specified value, or that the payer
paid more than necessary. As a result, it's important that our on-disk
records properly reflect this.

To fix this issue, the SettleInvoice method now also accepts the final
amount paid.

Fixes #856.
2018-07-06 12:21:55 -07:00
Olaoluwa Osuntokun
0a045f8651
Merge pull request #1482 from cfromknecht/uniform-fee-update-timeout
htlcswitch/link: correct bias in fee update backoff
2018-07-03 22:27:22 -05:00
Olaoluwa Osuntokun
d889644f52
htlcswitch: use Batch for calls within ackSettleFail 2018-06-30 17:15:31 -05:00
Olaoluwa Osuntokun
3ad15c5f42
hltcswitch: use a logClosure to delay spew evaluation until log print time 2018-06-30 17:15:04 -05:00
Conner Fromknecht
12f74f762d
htlcswitch/test_utils: use realistic link timeouts 2018-06-30 11:51:47 -07:00
Conner Fromknecht
10ecf2307f
htlcswitch/link_test: use realistic link timeouts 2018-06-30 11:42:36 -07:00
Conner Fromknecht
5fa8124aa1
htlcswitch/link: correct bias in fee update backoff
This commit corrects the distribution used to
schedule a link's randomized backoff for fee
updates. Currently, our algorithm biases the
lowest value in the range, with probability
equal to lower/upper, or the ratio of the lower
bound to the upper. This distribution is skewed
more heavily as lower approaches upper.

The solution is to sample a random value in the
range upper-lower, then add this to our lower
bound. The effect is a uniformly distributed
timeout in [lower, upper).
2018-06-30 10:22:38 -07:00
Olaoluwa Osuntokun
2196d9375e
htlcswitch: obtain the min final CLTV delta directly from the InvoiceDatabase
In this commit, we modify the existing logic that would attempt to read
the min CLTV information from the invoice directly. With this route, we
avoid any sort of DB index modifications, as this information is already
stored within the payment request, which is already available to the
outside callers. By modifying the InvoiceDatabase interface, we avoid
having to make the switch aware of what the "primary" chain is.
2018-06-29 16:03:13 -07:00