Commit Graph

2621 Commits

Author SHA1 Message Date
Conner Fromknecht
ed0c3dbc58
nursery_store: tracks last graduated and adds HeightsBelowOrEqual
This commit removes the use of a purge height from the nursery
 store, instead tracking the last graduated height. This serves
 to indicate the last height that the nursery store successfully
 graduated. It also adds a method for retrieving the set of all active
 heights below a particular threshold, e.g. the last graduated height,
 allowing the utxo nursery to replay these heights on startup for the
 specific purpose of re-registering for confirmations of outputs in the
 height index.
2017-11-16 16:16:04 -08:00
Conner Fromknecht
2ef821ed9a
lnd_test: extends force closure test to test for outgoing htlc incubation 2017-11-16 16:16:00 -08:00
Olaoluwa Osuntokun
d2c8f01768
routing/chainview: remove possibility of deadlock in shutdown of blockEventQueue 2017-11-16 16:01:21 -08:00
Jim Posen
0297042a8d chainntnfs: Use the new ConcurrentQueue in btcd notifier. 2017-11-16 15:15:22 -08:00
Jim Posen
c9ad9b2269 chainntnfs: Use the new ConcurrentQueue in neutrino notifier. 2017-11-16 15:15:22 -08:00
Jim Posen
726c8b2301 chainntnfs: Implement unbounded concurrent-safe FIFO queue.
This can be used in at least one place in the notifiers to improve
efficiency and reduce complexity.
2017-11-16 15:15:22 -08:00
Johan T. Halseth
555cead5ad peer: avoid blocked writeHandler<->queueHandler interaction
This commit addresses an issue that could occur if a
message was attempted added to the sendQueue by the
queueHandler before the writeHandler had started.

If a message was sent to the queueHandler before the
writeHandler was ready to accept messages on the
sendQueue, the message would be added to the
pendingMsg queue, but would not be attempted sent
on the sendQueue again before a new incoming message
triggered a new attempt.
2017-11-15 18:54:06 -08:00
Conner Fromknecht
2859956cd2
utxonursery_test: extends test vectors for nursery store 2017-11-15 18:49:13 -08:00
Conner Fromknecht
997a37ca23
utxonursery: integrate nursery store 2017-11-15 18:49:12 -08:00
Olaoluwa Osuntokun
1ca53ae906
test: decrease trickleDelay in integration tests to 50ms 2017-11-15 18:26:22 -08:00
Olaoluwa Osuntokun
2861f6e5f4
discovery: add additional comments to TestDeDuplicatedAnnouncements 2017-11-15 18:25:33 -08:00
Olaoluwa Osuntokun
d7aa769275
htlcswitch: add additional sleep to end of TestChannelLinkBidirectionalOneHopPayments 2017-11-15 18:25:01 -08:00
Olaoluwa Osuntokun
1be2a2a56a
rpc: display HTLC amount in satoshis in ListChannels response
Before this commit, they were displayed in mSAT which violates the
current trend of always displaying amounts externally in satoshis.
2017-11-15 18:23:58 -08:00
Olaoluwa Osuntokun
f189e2395a
routing: if the graph has never been pruned, prune with current height
In this commit we ensure that if this is the first time that the
ChannelRouter is starting, then we set the pruned height+hash to the
current best height. Otherwise, it’s possible that we attempt to update
the filter with a 0 prune height, which will restart a historical
rescan unnecessarily.
2017-11-15 18:19:39 -08:00
Olaoluwa Osuntokun
2b052cc889
routing: only update the filter if we have a non-zero chain view
In this commit we ensure that we only update the filter, if we have a
non-zero chain view. Otherwise, a mini rescan may be kicked off
unnecessarily  if we don’t yet know of any channels yet in the greater
graph.
2017-11-15 18:17:51 -08:00
Conner Fromknecht
35e3201097
lnwallet/script_utils: adds public HtlcSpendSuccess witness func 2017-11-15 18:08:33 -08:00
Conner Fromknecht
305acb86d0
lnwallet/size: adds htlc success and timeout witness sizes 2017-11-15 18:04:44 -08:00
Conner Fromknecht
7888c6e040
lnwallet/witnessgen: add HtlcOfferedTimeLock witness type 2017-11-15 18:04:44 -08:00
Conner Fromknecht
23343c0700
rpcserver: adds signed blocks til maturity in pending channels 2017-11-15 18:04:44 -08:00
Conner Fromknecht
1f34f117ff
lnrpc: adds PendingHTLCs to ForceClosedChannels 2017-11-15 18:04:44 -08:00
Laura Cressman
7408aa6c8d config+pathfind_test+notifications_test: format and fix newVertex import
Run go fmt so config file is formatted correctly. Also rename
newVertex to NewVertex in pathfind_test and notifications_test
as it is now exported from the routing package.
2017-11-15 16:50:19 -08:00
Laura Cressman
918ef2808f gossiper_test: add tests for deDupedAnnouncements struct
Add tests for new deDupedAnnouncements struct in gossiper_test.
Test the various functionalities of the struct - that empty
struct contains no announcements, that announcements of each type
can be added and properly de-duplicated, that the batch of
announcements is delivered correctly, and that after reset the
struct again contains no announcements.
2017-11-15 16:50:19 -08:00
Laura Cressman
ed6ad22e85 config+server+networktest: make trickleDelay configurable
Add option to set trickleDelay for AuthenticatedGossiper in
command line, with default value of 300 milliseconds. Pass this
value to newServer, which uses it when creating a new instance of
AuthenticatedGossiper. Also set this value to 300 milliseconds when
creating nodes in integration tests.
2017-11-15 16:50:19 -08:00
Laura Cressman
39d38da732 discovery: create deDupedAnnouncements struct in gosspier.go
For Part 1 of Issue #275. Create isolated private struct in
networkHandler goroutine that will de-duplicate
announcements added to the batch. The struct contains maps
for each of channel announcements, channel updates, and
node announcements to keep track of unique announcements.

The struct has a Reset method to reset stored announcements, an
AddMsg(lnwire.Message) method to add a new message to the current
batch, and a Batch method to return the set of de-duplicated
announcements.

Also fix a few minor typos.
2017-11-15 16:50:19 -08:00
Sam Lewis
1f95b660b9 chainntfns: Fix off by 1 block height error
In the historical dispatch of btcdnotify, the dispatcher checks if a
transaction has been included in a block. If this check happens before
the notifier has processed the update, it's possible that the
currentHeight of the notifier and the currentHeight of the chain might
be out of sync which causes an off by one error when calculating a
target height for the transaction confirmation. This change uses the
height of the block the transaction was found in, rather than the
currentHeight that's known by the notifier to eliminate this.
2017-11-13 22:36:25 -08:00
Sam Lewis
93981a85c0 chainntnfs: Fix btcdnotify dispatch race condition
This race condition can occur if a transaction is included in a block
right when a notification is being added to the notifier for it AND when
the confirmation requires > 1 confirmations. In this case, the
confirmation gets added to the confirmation heap twice.
2017-11-13 22:36:25 -08:00
Sam Lewis
b3509d491a chainntnfs: Add chainntfs lazy consumer test
This test adds a test for a consumer that registers for a transaction
confirmation but takes some time to check if that confirmation has
occured.

The test reveals a race condition that can cause btcdnotify to add a
confirmation entry to its internal heap twice. If the notification
consumer is not prompt in reading from the confirmation channel, this
can cause the notifier to block indefinitely.
2017-11-13 22:36:25 -08:00
Jim Posen
78f8ddef72 lnd: Remove some sleeps in integration tests.
There is a sleep after channels are opened to ensure the channel is
removed from the set of pending reservations. We can avoid this sleep
and get better guarantees of the channel being opened by deleting the
reservation just before updating channel state to active instead of
after.
2017-11-13 20:52:07 -08:00
Jim Posen
c501da3a95 lnd: Context timeouts on SendPayment RPC request in tests.
This helps catch issues in the RPC tests faster by putting a timeout
on all SendPayment requests. Otherwise, if a payment stalled, the test
would run until the test suite timeout, 10 minutes. Also simplifies
some code with a helper function and using SendPaymentSync where
possible.
2017-11-13 20:52:07 -08:00
Jim Posen
7d65ad4302 lnd: Ensure networkWatcher goroutine exits when harness is stopped. 2017-11-13 20:52:07 -08:00
Jim Posen
923dd9ac30 lnd: Better error handling in lightningNode.Start().
There is an issue currently where if an error occurs in Start() before
the LightningClient is initialized, the process won't be killed and
the program will segfault (because Stop() tries to call a method on
the nil LightningClient). This handles some of those edge cases.
2017-11-13 20:52:07 -08:00
Jim Posen
643c23f978 lnd: Improve error handling for node failures in integration tests.
If an lnd node encounters a fatal process errors, we now log the error
asynchronously, instead of calling Fatalf on the test instance. This
is because calling Fatalf in a separate goroutine does not actually
end the test immediately as expected, but rather just kills the
goroutine. This ensures that we see server errors on all nodes before
the test process exits.
2017-11-13 20:52:07 -08:00
Steven Roose
4e615f9afb lnd: add sample config file 2017-11-11 18:58:06 -08:00
Olaoluwa Osuntokun
b7407cf99b
Merge pull request #399 from halseth/encrypted-wallet-helptext
lncli: Print help text in case of encrypted wallet.
2017-11-11 18:54:00 -08:00
Olaoluwa Osuntokun
e7e426a1cc
Merge pull request #398 from halseth/sighash-signdesc-hashtype
Use dynamic SigHash type when signing transactions.
2017-11-11 17:30:54 -08:00
Alex
9bc25df906 lnwallet: fix linter complaints re. capitalization in interface test 2017-11-11 17:24:48 -08:00
Alex
7b43c9a750 lnwallet: add timeout and more accurate check to reorg interface test 2017-11-11 17:24:48 -08:00
Olaoluwa Osuntokun
06f82474d4
Merge pull request #407 from cfromknecht/router-prevent-rescan
router: prevent rescan on startup
2017-11-11 17:05:13 -08:00
Olaoluwa Osuntokun
b6f64932c2
htlcswitch: face race condition in unit tests by returning invoice
In this commit we modify the primary InvoiceRegistry interface within
the package to instead return a direct value for LookupInvoice rather
than a pointer. This fixes an existing race condition wherein a caller
could modify or read the value of the returned invoice.
2017-11-11 16:09:29 -08:00
Conner Fromknecht
e62bb0319d
routing/chainview/btcd: makes rescan logging statement print to trace 2017-11-11 15:53:42 -08:00
Conner Fromknecht
153794adb0
routing/router: sets bestHeight before filtering chain
This commit alters the behavior of the router's logic on
 startup, ensuring that the chain view is filtered using
 the router's latest prune height. Before, the chain was
 filtered using the bestHeight variable, which was
 uninitialized, benignly forcing a rescan from genesis.
 In tracking down this, we realized that we should
 actually be using the prune height, as this is
 representative of the channel view loaded from disk.
 The best height/hash are now only used during
 startup to determine if we are out of sync.
2017-11-11 15:53:38 -08:00
Olaoluwa Osuntokun
010815e280
lnwallet: no need to grab mutex in ProcessChanSyncMsg as is init method
In this method we fix an existing deadlock within the unit tests when
running with the race condition detector on. We don’t need to grab the
mutex within the ProcessChanSyncMsg method as this should be the very
first method called when initializing the channel if a channel state
sync is needed.
2017-11-11 15:50:33 -08:00
Olaoluwa Osuntokun
7d10ab3ae8
htlcswitch: increase timeouts of tests due to race condition detector 2017-11-11 15:07:02 -08:00
Olaoluwa Osuntokun
9d6e9c73f1
htlcswitch: modify TestChannelRetransmission to exit on first test failure 2017-11-11 15:06:25 -08:00
Olaoluwa Osuntokun
849abde253
htlcswitch: fix mockInvoiceRegistry implementation of SettleInvoice
In this commit we fix the implementation of SettleInvoice by ensuring
the lock is held for the duration of the method.
2017-11-11 15:05:58 -08:00
Olaoluwa Osuntokun
a702aace9c
htlcswitch: add new concurrentTester wrapper struct
In this commit we add a new wrapper struct for the testing.T struct
that allows multiple clients to attempt to fail a given test at the
same time.
2017-11-11 15:05:15 -08:00
Olaoluwa Osuntokun
861412529d
lnwallet: add select on quit when waiting for job from sigPool
In this commit we ensure that the channel is always able to exit by
adding a select statement with a quit case when we’re waiting on the
result of a job that was previously sent into the sigPool.
2017-11-11 15:00:50 -08:00
Olaoluwa Osuntokun
03ba13fcf8
lnwallet: ensure sigPool goroutines can always exit 2017-11-11 14:59:56 -08:00
Olaoluwa Osuntokun
8c181b6f4e
discovery: return an error if ChannelUpdate has unknown flags
In this commit, we fix an existing bug that could result in a panic if
we received a ChannelUpdate message with an unknown set of flags. If
the flag wasn’t set to zero or one, then the pubKey parameter would be
still nil when we attempted to validate it, causing an error to occur.

We remedy this by instead returning an error if the flags are unknown.
In a future commit, we will properly handle the set of flags that
indicates the channel should be disabled.
2017-11-11 14:59:16 -08:00
Olaoluwa Osuntokun
249e578130
README: add checkbox to BOLT #2 compatibility
Fixes #137!!!

Fixes #380, #297, #194, #137.
2017-11-10 19:51:15 -08:00