In this commit, we extract the time lock policy verification logic from
the processRemoteAdds method to the HtlcSatifiesPolicy method. With this
change, we fix a lingering bug within the link: we'll no longer verify
time lock polices within the incoming link, instead we'll verify it at
forwarding time like we should. This is a bug left over from the switch
of what the CLTV delta denotes in the channel update message we made
within the spec sometime last year.
In this commit, we extend the existing HtlcSatifiesPolicy method to also
accept timelock and height information. This is required as an upcoming
commit will fix an existing bug in the forwarding logic wherein we use
the time lock policies of the incoming node rather than that of the
outgoing node.
In this commit, we fix a bug in the generateHops helper function. Before
this commit, it erroneously used the CLTV delta of the current hop,
rather than that of the prior hop when computing the payload. This was
incorrect, as when computing the timelock for the incoming hop, we need
to factor in the CTLV delta of the outgoing lock, not the incoming lock.
In this commit, we add a new test to the switch:
TestForwardingAsymmetricTimeLockPolicies. This test ensures that a link
has two channels, one of which has a greater CLTV delta than the latter,
that a payment will successfully be routed across the channels. Atm, the
test fails (including the fix to hop payload generation included in the
next commit).
Atm, due to the way that we check forwarding policies, we'll reject this
payment as we're attempting to enforce the policy of the incoming link
(cltv delta of 7), instead of that of the outgoing link (cltv delta of
6). As a result, atm, the incoming link checks if (incoming_timeout -
delta < outgoing_timeout). For the values in the test case: 112 - 7 <
106 -> 105 < 106, this check fails. The payload is proper, but the check
itself should be applied at the outgoing hop.
In this commit, we modify the removeLink method to be more asynchronous.
Before this commit, we would attempt to block until the peer exits.
However, it may be the case that at times time, then target link is
attempting to forward a batch of packets to the switch (forwardBatch).
Atm, this method doesn't pass in an external context/quit, so we can't
cancel this message/request. As a result, we'll now ensure that
`removeLink` doesn't block, so we can resume the switch's main loop as
soon as possible.
In this commit, we move the block height dependency from the links in
the switch to the switch itself. This is possible due to a recent change
on the links no longer depending on the block height to update their
commitment fees.
We'll now only have the switch be alerted of new blocks coming in and
links will retrieve the height from it atomically.
In this commit, we modify the behavior of links updating their
commitment fees. Rather than attempting to update the commitment fee for
each link every time a new block comes in, we'll use a timer with a
random interval between 10 and 60 minutes for each link to determine
when to update their corresponding commitment fee. This prevents us from
oscillating the fee rate for our various commitment transactions.
In this commit, we fix a bug in the way we handle removing items from
the interfaceIndex. Before this commit, we would delete all items items
with the target public key that of the peer that owns the link being
removed. However, this is incorrect as the peer may have other links
sill active.
In this commit, we fix this by first only deleting the link from the
peer's index, and then checking to see if the index is empty after this
deletion. Only if so do we delete the index for the peer all together.
In this commit, we modify the interfaceIndex to no longer key the second
level of the index by the ChannelLink. Instead, we'll use the chan ID as
it's a stable identifier, unlike a reference to an interface.
In this commit, we ensure that the packet queue will always exit, by
continually signalling the main goroutine until it atomically sets a
bool that indicates its has been fully shutdown. It has been observed
that at times the main goroutine will wake up (due to the signal), but
then bypass the select and actually miss the quit signal, as a result
another signal is required. We'll continue to signals in a lazy loop
until the goroutine has fully exited.
This commit removes a possible deadlock in the switch,
which can be triggered under certain failure conditions.
Previously, we would acquire the link's read lock for
the duration of HtlcSatisfiesPolicy, though we only
need to use it grab the current policy. The deadlock could
be caused in the cases where we attempt to log the failure,
which access the read-protected ShortChanID method.
In this commit, we add and enforce a min fee rate for commitment
transactions created, and also any updates we propose to the remote
party. It's important to note that this is only a temporary patch, as
nodes can dynamically raise their min fee rate whenever their mempool is
saturated.
Fixes#1330.
This commit changes the decayed log tests to create
a new temporary database for each test. Previously, all
instances referenced the same db path. Since the tests
are run in parallel, the tests would create/delete the
shared db out from under each other, causing flakes in
the unit tests.
Adds a new closure OnChannelFailure to the link config, which is called
when the link fails. This function closure should use the given
LinkFailureError to properly force close the channel, send an error to
the peer, and disconnect the peer.
This commit introduces a new error type LinkFailureError which is used
to distinguish the different kinds of errors that we can encounter
during link operation. It encapsulates the information necessary to
decide how we should handle the error.
In this commit, we fix an existing source of a panic, that could at
times lead to a deadlock. If the circuit returned from closeCircuit
didn't have an outgoing key (as it was an incomplete forward), then we
would attempt to de-ref a nil pointer. This would trigger a panic, and
the runtime would start to unwind the stack, and execute each defer in
line. A deadlock can arise here, as in the defer at the root goroutine,
we need to grab the fwdingEventMtx. However, we already have it at the
panic site.
We fix this issue by ensuring we only attempt to add the event if it's a
_settle_ and also actually has an outgoing circuit (which it should
already, just a defensive check).
This commit adds a test where we trigger a situation which would
previously make the link think it was never in sync, and potentially
create a lot of empty state updates. This would happen if we were
waiting for a revocation, while still receiving updates from the remote.
Since in this case we could not ACK the updates because of the exhausted
revocation window, our local commitchain would extend, while the remote
chain would stall. When we finally got the revocation the local
commitment height would be far larger than the remote, and FullySynced
would return false from that point on.
This commit adds a new test that makes sure we don't try to send
commitments for states where there are now new updates. Before the
recent change to FullySynced we would do this in this test scenario, as
the local an remote commitment heights would differ.
The test makes the local commitment chain extend by 1 vs the remote,
which would earlier trigger another state update, and checks taht no
such state update is made.
This commit makes the call to forwardBatch after locking
in Adds synchronous. This ensures that circuits for any Add
packets are added to the switch in the same order that they
are prescribed in the channel state. Though it is very unlikely
this case would arise, it may happen under more greater loads.
In addition, this also makes some trivial optimizations wrt. to
not spawning unnecessary goroutines if no settle/fail packets
are locked in.
In this commit, we ensure that any time we send a TempChannelFailure
that's destined for a multi-hop source sender, then we'll always package
the latest channel update along with it.
In this commit, we fix a race in the set of TestChannelLinkTrimCircuits*
tests. Before this commit, we would trim the circuits in the htlcManager
goroutine. However, this was problematic as the scheduling order of
goroutines isn't predictable. Instead, we'll now trim the circuits in
the Start method.
Additionally, we fix a series of off-by-2 bugs in the tests themselves.
This commit inserts an initial set of HodlFlags into
their correct places within the switch. In lieu of the
existing HtlcHodl mode, it is been replaced with a
configurable HodlMask, which is a bitvector representing
the desired breakpoints. This will allow for fine grained
testing of the switch's internals, since we can create
arbitrary delays inside a otherwise asynchronous system.
In this commit, we update the testUpdateChannelPolicy to exercise the
recent set of changes within the switch. If one applies this test to a
fresh branch (without those new changes) it should fail. This is due to
the fact that before, Bob would attempt to apply the constraints of the
incoming link (which we updated) instead of the outgoing link. With the
recent set of changes, the test now properly passes.
In this commit, we fix the TestUpdateForwardingPolicy test case after
the recent modification in the way we handling validating constraints
within the link. After the recent set of changes, Bob will properly use
his outgoing link to validate the set of fee related constraints rather
than the incoming link. As a result, we need to modify the second
channel link, not the first for the test to still be applicable.
In this commit, we simplify the switch's code a bit. Rather than having
a set of channels we use to mutate or query for the set of current
links, we'll instead now just use a mutex to guard a set of link
indexes. This serves to simplify the ode, and also make it such that we
don't need to block forwarding in order to add/remove a link.
In this commit, we fix a very old, lingering bug within the link. When
accepting an HTLC we are meant to validate the fee against the
constraints of the *outgoing* link. This is due to the fact that we're
offering a payment transit service on our outgoing link. Before this
commit, we would use the policies of the *incoming* link. This would at
times lead to odd routing errors as we would go to route, get an error
update and then route again, repeating the process.
With this commit, we'll properly use the incoming link for timelock
related constraints, and the outgoing link for fee related constraints.
We do this by introducing a new HtlcSatisfiesPolicy method in the link.
This method should return a non-nil error if the link can carry the HTLC
as it satisfies its current forwarding policy. We'll use this method now
at *forwarding* time to ensure that we only forward to links that
actually accept the policy. This fixes a number of bugs that existed
before that could result in a link accepting an HTLC that actually
violated its policy. In the case that the policy is violated for *all*
links, we take care to return the error returned by the *target* link so
the caller can update their sending accordingly.
In this commit, we also remove the prior linkControl channel in the
channelLink. Instead, of sending a message to update the internal link
policy, we'll use a mutex in place. This simplifies the code, and also
adds some necessary refactoring in anticipation of the next follow up
commit.
In this commit, we fix a slight bug in lnd. Before this commit, we would
send the error to the remote peer, but in an async manner. As a result,
it was possible for the connections to be closed _before_ the error
actually reached the remote party. The fix is simple: wait for the error
to be returned when sending the message. This ensures that the error
reaches the remote party before we kill the connection.
In this commit, add a new argument to the SendMessage method to allow
callers to request that the method block until the message has been sent
on the socket to the remote peer.
In this commit, we fix an issue where users would be displayed negative
amounts of satoshis either as sent or received. This can happen if the
total amount of channel updates decreases due to channels being closed.
To fix this, we properly handle a negative difference of channel
updates by updating the stats logged to only include active
channels/links to the switch.
In this commit, we relax the constraints on accepting an exit hop
payment a bit. We'll now accept any incoming payment that _at least_
pays the invoice amount. This puts us further inline with the
specification, which recommends that nodes accept overpayment by a
certain margin.
Fixes#1002.
In this commit, we remove a ton of unnecessary indentation in the
processRemoteAdds method. Before this commit, we had a switch statement
on the type of the entry. This was required before when the method was
generic, but now since we already know that it’s an Add, we no longer
require such a statement.
In this commit, we remove the DecodeHopIterator method from the
ChannelLinkConfig struct. We do this as we no longer use this method,
since we only ever use the DecodeHopIterators method now.
In this commit, we fix a bug that was uncovered by the recent change to
lnwire.MilliSatoshi. Rather than manually compute the diff in fees,
we’ll directly compare the fee that is given against the fee that we
expect.
In this commit, we extend the switch as is, to record details
concerning settled payment circuits. To do this, we introduce a new
interface to the package: the ForwardingLog. This is a tiny interface
that simply lets us abstract away the details of the storage backing of
the forwarding log.
Each time we receive a successful HTLC settle, we’ll log the full
details (chans, fees, time) as a pending forwarding log entry. Every 15
seconds, we’ll then batch flush out these entries to disk. When we’re
exiting, we’ll try to flush out all entries to ensure everything gets
recorded to disk.
We’ll need this value within the link+switch in order to fully populate
the forwarding event that will be generated if this HTLC circuit is
successfully completed.
In this commit, we add the incoming+outgoing amounts if the HTLC’s that
the payment circuit consists of. With these new fields, we’ll be able
to populate the forwarding event log once the payment circuit has been
successfully completed.
This commit fixes a deadlock scenario caused when some
switch methods are waiting for a response on the
command's done/err chan. However, no such response will
be delivered if the main event loop has already exited.
This is resolved by selecting on the command's done/err chan
and the server's quit chan simultaneously.
