Follow up labelling of external transactions with labels for the
transaction types we create within lnd. Since these labels will live
a life of string matching, a version number and rigid format is added
so that string matching is less painful. We start out with channel ID,
where available, and a transaction "type". External labels, added in a
previous PR, are not updated to this new versioned label because they
are not lnd-initiated transactions. Label matching can check this case,
then check for a version number.
This reduces the flakiness of the CPFP test by asserting the wallet has
seen the unspent output before attempting to perform the walletkit's
BumpFee method.
Previously the attempt to bump the fee of the target transaction could
be made before the wallet had had a chance to fully process the
transaction, causing a flaky error.
This switches a few call sites that used a different timeout when
openening channels to the correct openChannelTimeout, which better deal
with flakes in the CI.
This replaces an outstanding sleep for a check for a specific state
during the test for watchtower use: specifically, that the backup has
been sent to the watchtower prior to shutting down Dave.
This reduces flakiness in the test that could occur if the Dave shutdown
without the backup being comitted to the watchtower, causing the rest of
the test to fail.
In this commit, we split off the protocol options into a normal and
legacy sub-config. The legacy sub-config protected by a built tag, and
will only be populated if thet tag is set. Legacy options now have a
`legacy` prefix. So `--protocol.legacyonion` is now `--protocol.onion`,
and `--protocol.committweak`, is now `--protocol.legacy.committweak`.
We also create a new experimental protocol feature sub-config for newer
features that may not yet been fully complete, so they require a build
tag.
This is useful when we wish to have a channel frozen for a specific
amount of blocks after its confirmation. This could also be done with an
absolute thaw height, but it does not suit cases where a strict block
delta needs to be enforced, as it's not possible to know for certain
when a channel will be included in the chain. To work around this, we
add a relative interpretation of the field, where if its value is below
500,000, then it's interpreted as a relative height. This approach
allows us to prevent further database modifications to account for a
relative thaw height.
In this commit we add the ability to intercept forwarded htlc packets
straight from the RPC layer. The RPC layer handles a bidrectional stream
that comminucates to the client the intercepted packets and handles its
response by coordinating with the interceptable switch.
This commit extends the link with a new synchronous delivery point for
local UpdateAddHTLC messages. The switch method SendHTLC is updated to
use this delivery point and thereby becomes a synchronous call.
For MPP payments, synchronous hand-off is important. Otherwise the next
pathfinding round could start without the channel balance updated yet.
This fixes an issue where the contract court could leave a completely
swept commit tx unresolved if it was swept by the remote party.
This could happen if (our) commit tx just published was actually a
previously revoked state, in which case the remote party would claim the
funds via a justice transaction.
This manifested itself in the testRevokedCloseRetribution integration
test where at the end of the test Bob was left with a pending channel
that never resolved itself.
The message in the response stream changed. Rename the calls themselves,
to prevent older applications from getting decode errors. Especially
troublesome is the case where the request is executed (send payment),
but the application can't read the outcome (payment sent or not?)
This commit fixes the inconsistency between the payment state as
reported by routerrpc.SendPayment/routerrpc.TrackPayment and the main
rpc ListPayments call.
In addition to that, payment state changes are now sent out for every
state change. This opens the door to user interfaces giving more
feedback to the user about the payment process. This is especially
interesting for multi-part payments.
This commit removes the overflowQueue from the link. We do so in order
to promote better UX for senders, so that HTLCs are failed faster when
the commitment is full. This gives the sender the opportunity to try
another, more open path, rather than perceive the HTLC as being stuck.
At the same time, we remove the total number of active goroutines in lnd
by a factor of N where N is the number of active channels.
This is mainly motivated by a now fixed bug in the wallet in which
change addresses could at times be created outside of the default key
scopes. Recovery only used to be performed on the default key scopes, so
ideally this test case would've caught the bug earlier.
Move enum out of CloseSummary struct for more general use. This does
not change the encoding of the enum, and will only cause compile time
errors for existing clients. This enum has not been included in a
release yet, so we can make this move without much disruption.
In #4130, OpenChannel was changed to assert that the wallet is fully
synced before allowing a channel open. This introduced flakes on travis,
which are resolved here by using a wait predicate when calling
OpenChannel.
Note there is one existing call that was not converted, because it is
interested in the returned error. This call does not have a wait
predicate surrounding it, but this shouldn't cause a flake because other
channels are opened earlier in the test that will have already waited
for the wallet to sync up.
testSendToRouteMultiPath tests that we are able to successfully route a
payment using multiple shards across different paths, by using SendToRoute.
Co-authored-by: Joost Jager <joost.jager@gmail.com>
In preparation for MPP we return the terminal errors recorded with the
control tower. The reason is that we cannot return immediately when a
shard fails for MPP, since there might be more shards in flight that we
must wait for. For that reason we instead mark the payment failed in the
control tower, then return this error when we inspect the payment,
seeing it has been failed and there are no shards in flight.
These tests exercise the different ways of sweeping a commitment, so
we'll cover the modified scripts used for anchor commitments and
spending the anchor itself by both parties.
Co-authored-by: Johan T. Halseth <johanth@gmail.com>
Fixes a subtle bug where the outer scope predErr was hidden when the
return value of findForceClosedChannel was stored in a newly
defined variable with the same name.
Start anchor sweep attempts immediately after the commitment transaction
has been published. This makes the anchor known to the sweeper and
allows the user to bump the fee on it to get their commitment
transaction confirmed in case the fee committed too is insufficient for
timely confirmation.
In this commit, we extend the current SCB recovery tests to also cover
the new anchor commitment type. We only add a single test that covers
the most common case to avoid needing to tests all cases for all
commitment types which is being done in a follow up PR.
The synchronous call to get all channel backups also include
channels that are pending at the moment of the call. A previous
commit added pending channels to the file based backup as well. So
this is the last backup method that needs to be adjusted to also
contain unconfirmed channels.
Update channel updates and subscription itest to check that close
initiator is appropriately set for cooperative and force closes for the
local and remote party.
This commit adds PendingOpenChannel to SubscribeChannelEvents stream in
the gRPC API.
This is useful for keeping track of channel openings that Autopilot does.
It can also be used for the non-initator side of a channel opening to keep
track of channel openings.
Integration tests in external projects might not have the same folder
structure as lnd does. Therefore we want to allow the path to the
lnd itest binary to be configurable.
This commit constructs a helper closure assertAmountSent that can be
reused by other functions. The closure returns an error so that it can
be used with wait.NoError or the new wait.InvariantNoError. The latter
is added since the predicate could otherwise pass immediately for the
sphinx_replay_persistence tests, but change shortly after. It also
rounds out the wait package so that we offer all combinations of
predicate and no-error style waits.
Since CSV locked outputs specifies the first block where they are
allowed to be included, they can actually be added one block earlier
into the mempool.
This led to a flake, where the sweep tx was already in the mempool at
the time we mined the last block, causing the next mempool check to
fail.
This commit adds an itest assertion to check that a coop closed
channel's status is properly refelcted in list channels. We also fix a
race condition that prevented the rpc from being externally consistent
by marking the close sooner in the pipeline.
Refresh channel memory state whenever the short channel id is refreshed.
This is to make the in-memory channel consistent with the disk data.
Fixes#3765.
This fixes an issue that would lead to a flake during intergration
tests. Carol would start up with a outdated state and attempt to force
close the channel. At the same time she would connect to Dave,
triggering the dataloss protection. Dave would respond by force closing
the channel, and Dave transaction would in some cases have a higher fee,
resulting Carol's tx being replaced.
We fix this by suspending Dave until Carol's close tx is mined.
In this commit, we update the `AbandonChannel` method to also remove the
state from the countract court as well as the channel graph. Abandoning
a channel is now a three step process: remove from the open channel
state, remove from the graph, remove from the contract court. Between
any step it's possible that the users restarts the process all over
again. As a result, each of the steps below are intended to be
idempotent.
We also update the integration test to assert that no channel is found
in the graph any longer. Before this commit, this test would fail as the
channel was still found in the graph, which can cause other issues for
an operational daemon.
Fixes#3716.
This commit beings the process of deprecating unsafe-disconnect. Many
moons ago this was disallowed to prevent concurency bugs surrounding
reconnect. Despite the name, it has been safe to enable this feature for
well over a year, as several PRs have been merged that addressed the
possible issues that existed when the feature was added.
In this commit, we refactor the testSingleHopSendToRoute test to support
table driven tests for various endpoints and payment types. Currently
only the main rpcserver's SendToRoute is tested, so we also add
support the SendToRouteSync and the routerrpc's SendToRoute.
The tests are also modified to have each endpoint perform a single-hop,
single-shot MPP payment. This asserts that the Hop messages are being
properly unmarshalled and that setting correctly yields a successful
payment. At the momemnt the receiver does not actually verify or use the
MPP fields presented in the onion, though this test will be expanded
later as those pieces are assembled.
We add a wait predicate to make sure the node's on-chain balance is
restored before continuing the restore test case.
This is needed since the DLP test scenario includes several restarts of
the node, and if the node isn't done scanning for on-chain balance
before the restart happens, it would be unlocked without a recovery
window, causing funds to be left undiscovered.
Since the ErrorCodes are not part of the spec, they cannot be read by
other implementations.
Instead of only sending the error code we therefore send the complete
error message. This will have the same effect at the client, as it will
just get the full error instead of the code indicating which error it
is. It will also be compatible with other impls.
Note that the GRPC error codes will change, since we don't set them
anymore.
This changes the defer function in the test for channel backups to
correctly close over the 'dave' variable.
Without this closure, the shutdownAndAssert call would attempt to
shutdown the original (non-restored) dave instead of the most recently
created (restored) dave, causing a leak of a node during tests.
The test assumed that transactions would be broadcast and confirmed at
incorrect heights. Due to timing issues, it was possible for the test to
still succeed, resulting in a flake.
The test assumes that Bob will sweep a pending outgoing HTLC and commit
output back to their wallet. This commit ensures that these operations
are done when expected, i.e.:
1. Bob force closes the channel due to the HTLC timing out.
2. Once the channel is confirmed, Bob broadcasts their HTLC timeout
transaction.
3. Bob broadcasts their commit output sweep transaction once its CSV
expires.
4. Bob broadcasts their second layer sweep transaction for the timed out
HTLC once its CSV expires.
Alice and Dave don't need to be connected in order to receive the node
announcement as we assume that she can receive it from Bob because they
are connected at the beginning of every test.
In this commit, we force Dave to use the legacy onion payload for the
multi-hop test to ensure that we're able to properly mix the old and new
formats, and have all nodes properly decode+forward the HTLC.
htlcs
config: Adding RejectHTLC field in config struct
This commit adds a RejectHTLC field in the config struct in config.go.
This allows the user to run lnd as a node that does not accept onward
HTLCs.
htlcswitch/switch: Adding a field RejectHTLC to the switch config
This commit adds a field RejectHTLC to the switch config. When the
switch receives an HTLC it will check this flag and if the HTLC is not
from the source hop, the HTLC will be rejected.
htlcswitch/switch: adding check for RejectHTLC flag and incomingChanID
This commit adds a check when receiving UpdateAddHTLC. The check looks
for the RejectHTLC flag set and whether the HTLC is from the sourceHop
(the local switch). If the HTLC is not from the sourceHop, then we
reject the HTLC and return a FailChannelDisabled error.
server: adding RejectHTLC field to initialization of switch
lnd_test: adding test for RejectHTLC
This commit adds a test which tests that a node with the --rejecthtlc
flag will reject any onward HTLCs but still can receive direct HTLCs and
can send HTLCs.
Previously a temporary channel failure was returning for unexpected
malformed htlc failures. This is not what we want to communicate to the
sender, because the sender may apply a penalty to us only.
Returning the temporary channel failure is especially problematic if we
ourselves are the sender and the malformed htlc failure comes from our
direct peer. When interpretating the failure, we aren't able to
distinguish anymore between our channel not having enough balance and
our peer sending an unexpected failure back.
Debug invoices are rarely used nowadays, but keep asking for maintenance
every time refactoring in primarily the invoice registry occurs. We have
passed the cost/benefit tipping point, so therefore the debug invoice
concept is removed in this commit.
Previously the debughtlc flag also controlled whether hodl masks were
active. It is safe to remove that additional condition because the hodl
masks are still guarded by the dev build tag.
Previously mission control tracked failures on a per node, per channel basis.
This commit changes this to tracking on the level of directed node pairs. The goal
of moving to this coarser-grained level is to reduce the number of required
payment attempts without compromising payment reliability.
Align naming better with the lightning spec. Not the full name of the
failure (FailIncorrectOrUnknownPaymentDetails) is used, because this
would cause too many long lines in the code.
With the introduction of the WatchtowerClient RPC subserver, the lnd
configuration flag to specify private watchtowers for the client is no
longer needed and can lead to confusion upon users. Therefore, we remove
the flag completely, and only rely on the watchtower client being active
through a new --wtclient.active flag.
This commit makes the outgoing link pipeline the settle to the
switch as soon as it receives it. Previously, it would wait for a
revocation before sending it, which caused increased latency on
payments as well as possibly never settling on the incoming link.
A duplicate settle is still sent to the switch, but it is handled
gracefully. A new AckEventTicker was added to the switch which
acknowledges any pending settle / fail entries in an outgoing
link's fwd pkgs in batch. This was needed in order to reduce the
number of db txn's which would have been incurred by acking whenever
we receive a duplicate settle without batching.
This flake was caused by the rpcserver receiving a CloseChannel request
before Alice's channel event subscription request, causing Alice to miss one
notification. As a result, we move Alice's subscription to the beginning of the
test.
Additionally, we add a check to ensure the opening notifications are
received in the right order.
Earlier versions of ListPayments only included completed payments. We
return to this behavior by ignore all other payments if the nonSucceeded
boolean is not set in the request.
