This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
In this commit, we modify areas where we need to force close a channel
to use the new FetchChannel method instead of manually scanning. This
dramatically reduces the CPU usage when doing things like closing a
large number of channels within lnd.
In this commit:
* we partition lnwire.ChanUpdateFlag into two (ChanUpdateChanFlags and
ChanUpdateMsgFlags), from a uint16 to a pair of uint8's
* we rename the ChannelUpdate.Flags to ChannelFlags and add an
additional MessageFlags field, which will be used to indicate the
presence of the optional field HtlcMaximumMsat within the ChannelUpdate.
* we partition ChannelEdgePolicy.Flags into message and channel flags.
This change corresponds to the partitioning of the ChannelUpdate's Flags
field into MessageFlags and ChannelFlags.
Co-authored-by: Johan T. Halseth <johanth@gmail.com>
In this commit, we implement the new feature which allows sendcoins to
sweep all the coins in the wallet. We use the new sweep.CraftSweepAllTx
method, and also use WithCoinSelectLock to ensure that we don't trigger
any double-spend errors triggered by coin selection race conditions.
In this commit, we add a new method WithCoinSelectLock. This method will
allow us to fix bugs in the project atm that can arise if a channel
funding is attempted (either manually or by autopilot) while a users is
attempting to send an on-chain transaction. If this happens
concurrently, then both contexts will grab the set of UTXOs and attempt
to lock them one by one. However, since they didn't obtain an exclusive
snapshot of the UTXO set of the wallet, they may both attempt to lock
the same input.
We also ensure that calls to SendMany cannot run into this issue by
using the WithCoinSelectLock synchronization when attempting to instruct
the internal wallet to send payments.
In this commit, we extract the existing determineFeePerKw method on the
RPC server into a new file in the sweep package. Along the way, we
consolidate code by introducing a new FeePreference struct, which allows
the caller to express their fee preference either in blocks to
confirmation, or a direct fee rate. This move takes a small step to
father decoupling calls in the main RPC server.
This commit is a preparation for the addition of new invoice
states. A database migration is not needed because we keep
the same field length and values.
In this commit, we remove the per channel `sigPool` within the
`lnwallet.LightningChannel` struct. With this change, we ensure that as
the number of channels grows, the number of gouroutines idling in the
sigPool stays constant. It's the case that currently on the daemon, most
channels are likely inactive, with only a hand full actually
consistently carrying out channel updates. As a result, this change
should reduce the amount of idle CPU usage, as we have less active
goroutines in select loops.
In order to make this change, the `SigPool` itself has been publicly
exported such that outside callers can make a `SigPool` and pass it into
newly created channels. Since the sig pool now lives outside the
channel, we were also able to do away with the Stop() method on the
channel all together.
Finally, the server is the sub-system that is currently responsible for
managing the `SigPool` within lnd.
Returns a brief json summary of each utxo found by calling
ListUnspentWitness in the wallet. The two arguments are the
minimum and maximum number of conrfirmations (0=include
unconfirmed)
In this commit, we extend the admin macaroon with signer capabilities in
order to allow it to be used with the new signer sub-server. As a
result, users will need to clear out their old macaroons in order to
have the new improved admin macaroon generated. In the future, we may
want to restructure the way the admin macaroon functions: rather than
white listing each of these entities and operations, we can instead add
a catch all capability. This capability will instead allow access to any
call, as each new call would be modified to permit this capabilities and
no others.
In this commit, we modify the existing rpcServer to fully manage the
macaroons, gRPC server, and also seek out and create all sub-servers.
With this change, the RPC server gains more responsibility, as it
becomes the "root" server in the hierarchy of gRPC sub-servers.
In addition to creating each sub-server, it will also merge the set of
macaroon permissions for each sub-server, with the permissions of the
rest of the RPC infra. As a result, each sub-server is able to
independently specify what it needs w.r.t macaroon permissions and have
that taken care of by the RPC server. In order to achieve this, we need
to unify the creation of the RPC interceptors, and also fully manage the
gRPC server ourselves.
Some examples with various build configs:
```
⛰i make build
Building debug lnd and lncli.
go build -v -tags="dev" -o lnd-debug -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty" github.com/lightningnetwork/lnd
go build -v -tags="dev" -o lncli-debug -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty" github.com/lightningnetwork/lnd/cmd/lncli
⛰i ./lnd-debug --debuglevel=debug --signrpc.signermacaroonpath=~/sign.macaroon
unknown flag `signrpc.signermacaroonpath'
unknown flag `signrpc.signermacaroonpath'
⛰i make build tags=signerrpc
Building debug lnd and lncli.
go build -v -tags="dev signerrpc" -o lnd-debug -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty" github.com/lightningnetwork/lnd
go build -v -tags="dev signerrpc" -o lncli-debug -ldflags "-X github.com/lightningnetwork/lnd/build.Commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty" github.com/lightningnetwork/lnd/cmd/lncli
⛰i ./lnd-debug --debuglevel=debug --signrpc.signermacaroonpath=~/sign.macaroon
2018-10-22 17:31:01.132 [INF] LTND: Version: 0.5.0-beta commit=v0.5-beta-143-gb2069914c4b76109b7c59320dc48f8a5f30deb75-dirty, build=development, logging=default
2018-10-22 17:31:01.133 [INF] LTND: Active chain: Bitcoin (network=simnet)
2018-10-22 17:31:01.140 [INF] CHDB: Checking for schema update: latest_version=6, db_version=6
2018-10-22 17:31:01.236 [INF] LTND: Primary chain is set to: bitcoin
2018-10-22 17:31:02.391 [INF] LNWL: Opened wallet
2018-10-22 17:31:03.315 [INF] LNWL: The wallet has been unlocked without a time limit
2018-10-22 17:31:03.315 [INF] LTND: LightningWallet opened
2018-10-22 17:31:03.319 [INF] LNWL: Catching up block hashes to height 3060, this will take a while...
2018-10-22 17:31:03.320 [INF] HSWC: Restoring in-memory circuit state from disk
2018-10-22 17:31:03.320 [INF] LNWL: Done catching up block hashes
2018-10-22 17:31:03.320 [INF] HSWC: Payment circuits loaded: num_pending=0, num_open=0
2018-10-22 17:31:03.322 [DBG] LTND: Populating dependencies for sub RPC server: Signrpc
```
As for the config, an example is:
```
[signrpc]
signrpc.signermacaroonpath=~/signer.macaroon
```
By passing a pubkey into SendToRoute, it becomes unnecessary for lnd to
query the channel graph to retrieve the hop pubkey. This allows routes
over private channels that are not present in the graph.
In this commit, we ensure that we don't include routing hints for
unadvertised nodes at the time of invoice creation. Otherwise, this
would lead us to leak these unadvertised nodes to anyone who can get
their hands on the invoice being created. To prevent this, we'll now
look at the network graph and ensure that the node in unadvertised if
all of their edges are unadvertised and only extend to us.
In this commit, we address a slight regression in the defaults provided
by the OpenChannel RPC with regards to spending unconfirmed outputs to
fund funding transactions. We now add a new boolean parameter to
OpenChannelRequest: SpendUnconfirmed. If set, we'll use this to
indicate to the server that the funding transaction of the channel to be
created can spend the wallet's unconfirmed outputs to fund it. This
addition is needed because otherwise, if the caller doesn't specify a
MinConfs parameter to the request, then a default of 0 will be used,
which is not ideal.
In this commit the dependency of unmarshallRoute on edge policies being
available is removed. Edge policies may be unknown and reported as nil.
SendToRoute does not need the policies, but it does need pubkeys of the
route hops. In this commit, unmarshallRoute is modified so that it
takes the pubkeys from edgeInfo instead of channelEdgePolicy.
In addition to this, the route structure is simplified. No more connection
to the database at that point. Fees are determined based on incoming and
outgoing amounts.
In this commit, we extend the AbandonChannel RPC method to store as much
information as possible within the CloseSummary. Most importantly, we
store the current and next (if available) revocation of the remote party
along with the channel config for the local party. With this
information, we have enough data to be able to generate a custom signer
for a new commitment state, or to prove that the channel was indeed
ours if needed.
In this commit, we remove the unnecessary NewWitnessAddress RPC. We do
this as, at the moment, we only expose the wallet to generate witness
addresses. Now that the RPC has been removed, its REST endpoint has been
assigned to the NewAddress RPC, which should be the de facto way of
having the wallet generate any type of supported address.
Fixes#1986.
Using AbandonChannel, a channel can be abandoned. This means
removing all state without any on-chain or off-chain action.
A close summary is the only thing that is stored in the db after
abandoning.
A specific close type Abandoned is added. Abandoned channels
can be retrieved via the ClosedChannels RPC.
In a previous commit, we modified our fee rates to be sat/kw internally
as it was possible that the estimated fee rate was not enough to
properly broadcast the transaction. To remedy this, we decided to add a
fee floor, but this would only be enforced when querying the fee
estimator. In this commit, we attempt to do the same thing, but for fee
rates input manually by the user.
The commit ensures that for every channel, there will always
be two entries in the edges bucket. If the policy from one or
both ends of the channel is unknown, it is marked as such.
This allows efficient lookup of incoming edges. This is
required for backwards payment path finding.
In this commit, we explicitly convert sat/vbyte fee rates input by the
user to sat/kw. We do this as users are typically more accustomed to
sat/vbyte fee rates, rather than sat/kw.
In this commit, we fix a slight regression that happened when the
sendtoroute RPC call was implemented. As a result of the refactoring,
the debughtlc mode silently broke. In this commit, we fix this by
checking against the zero hash, rather than the length of the payment
hash, as since we use a fixed sized byte slice, it will always be zero.
- Extend SendRequest and QueryRoutesRequest protos
- newRoute function takes fee limit and cuts off routes that exceed it
- queryRoutes, payInvoice and sendPayment commands take the feeLimit inputs and pass them down to newRoute
- When no feeLimit is included, don't enforce any feeLimits at all (by setting feeLimit to maxValue)
In this commit, we modify the logic for the two primary payment related
RPCs to reduce duplication, indentation, and consolidate logic. As a
result, we'll now accept rpcPaymentIntents, turn those into regular
paymentIntents (convert from proto) before finally dispatching via
unified function.
In this commit, we now allow connections to onion addresses due to
recently adding support to properly parse them.
Co-Authored-By: Eugene <crypt-iq@users.noreply.github.com>
In this commit, we fix an existing panic bug related to the recently
added routing hints feature. If it's the case that the remote node
didn't send us their edge, then when we go to compare the public keys to
see if they match, we may attempt to deref an nil pointer.
In order to fix this, we'll instead check the edgeInfo, which is
guaranteed to also exist if the channel was found in the database. As a
defensive step, before we go to actually aces the struct, we'll check
that's it's non-nil and proceed if it is nil.
In this commit, we modify the SignMessage+VerifyMessage slightly in
order to bind the message we're signing to our specific context. We do
this by pre-pending the ascii text "Lightning Signed Message:" to the
msg before we run it through dsha256. Adding this prefix binds the
message to our context in order to avoid accidentally signing a sighash
or the like.
In this commit, we avoid hitting a possible panic in the case that we
were unable to retrieve the link of a channel from the HTLC switch while
determining which channels should be used as routing hints for an
invoice.
This reverts commit 0f90c950daaec7843e305f32d10e36411fb0b47f.
We actually still need to notify the BRAR of a force close, as
otherwise, it doesn't have a signal to exit due to a local force close
event.
This commit fixes a bug where all the HTLC rhash slices in a
ListChannelsResponse would be tied to the loop variable, making them all
take the hash of the last HTLC in the list. This commit fixes it by
making a copy of the slice.
In this commit, we update the testUpdateChannelPolicy to exercise the
recent set of changes within the switch. If one applies this test to a
fresh branch (without those new changes) it should fail. This is due to
the fact that before, Bob would attempt to apply the constraints of the
incoming link (which we updated) instead of the outgoing link. With the
recent set of changes, the test now properly passes.
In this commit, we follow up to the prior commit by ensuring we won't
accept a co-op close request for a chennel with active HTLCs. When
creating a chanCloser for the first time, we'll check the set of HTLC's
and reject a request (by sending a wire error) if the target channel
still as active HTLC's.
In this commit, we fix a bug that at times could cause any dangling
HTLC's to be sent to miner's fees if a user attempted to close out a
channel cooperatively that still had pending HTLC's. We'll first prevent
this at the RPC level by rejecting any attempts to trigger a co-op
channel closure while a channel still have dangling HTLC's.
In this commit, we modify the existing invoice RPC macaroon permissions
to target a more specific entity: “invoices”. As a result of this
commit, once node operators update, they’ll need to regenerate their
readonly.macaroon as it now needs this additional entity encoded within
it.
In the prior commit, we added a new set of permissions and also a new
entity: “invoices”. We’ll add this set of entities to the read and
write permissions accordingly as well to ensure that the existing
macaroons have access to all the items that the invoice.macaroon does.
In this commit, we add a new invoicePermissions slice. This contains
all the permission that a holder of an invoice.macaroon is able to
access, and no others. We also include read and write access to
addresses as this may be useful from the PoV of a merchant or exchange.
In this commit, we raise the min channel size to 20k satoshis. This
will be evaluated before we check for dusty commitments. The goal of
this is to ensure ample room for fees at current, and future fee
levels.
In this commit, we fix a bug in the query routes RPC that could at
times lead to a panic. This would happen if the number of returned
routes was less than the number of expected routes. To remedy this,
we’ll return the minimum of the number of requested routes, and the
number of routes actually returned.
This commit adds wallet_best_block_timestamp to the gRPC interface.
This is done in order to allow clients to calculate progress while
lnd syncs to the blockchain. wallet_best_block_timestamp is exposed
via the GetInfo() rpc call. Additionally, IsSynced() returns the
WalletBestBlockTimestamp as the second value in the tuple
that is returned, providing additional detail when querying about the
status of the sync. The BtcWallet interface has also been updated
accordingly.
This commit was created to support the issue to
[Add progress bar for chain sync] (lightninglabs/lightning-app#10) in
lightning-app
This commit adds a new interface named NetInterface and two
implementations of it: RegularNet & TorProxyNet. These two structs
are used in config.go in an attempt to clean up the code and
abstract away the dialer and DNS functions.
This commit adds Tor support. Users can set the --TorSocks flag
to specify which port Tor's SOCKS5 proxy is listening on so that
lnd can connect to it. When this flag is set, ALL traffic gets
routed over Tor including DNS traffic. Special functions for
DNS lookups were added, and since Tor doesn't natively support
SRV requests, the proxySRV function routes connects us to
a DNS server via Tor and SRV requests can be issued directly
to the DNS server.
Co-authored-by: MeshCollider <dobsonsa68@gmail.com>
This commit reworks the macaroon authentication framework to use the
v2 macaroon format and bakery API. It also replaces the code in each
RPC method which calls the macaroon verifier with interceptors which
call the macaroon verifier instead. In addition, the operation
permissions are reworked to fit the new format of "allow" commands
(specifically, entity/operation permissions instead of method
permissions).
Since a ChannelPoint's funding txid can now be get/set as raw bytes or
a string, we first need to check what type it's currently set to before
accessing it.
Fixes#481.
Prior to this commit, payments stored in the channel DB only kept a
record of the payment hash. This is a problem as the preimage is what
serves as proof of payment and a user should be able to look up this
value in the future (not just immediately after payment).
Instead of storing both the payment hash and the preimage, we store the
preimage only since the hash can be derrived from this using a SHA256.
In the RPC listpayments command, we now give the preimage in addition to
the payment hash.
We no longer need to hand off new channels that come online as the
chainWatcher will be persistent, and always have an active signal for
the entire lifetime of the channel.
This commit changes the name of the UpdateFee method to
UpdateChannelPolicy, to mimic the recent proto change.
It also reads and validates the passed TimeLockDelta,
and sends it to the gossiper for announcing it to the
network, and to the switch for updating the forwarding
policy of the links.
In this commit, we remove the blocks_till_open from
PendingChannelsResponse as in its current state, the values that are
assigned to this field don’t accurately reflect the naming. This has
caused a good bit of confusion amongst users lately. As a result, we’re
temporarily removing this field until we have proper incremental
notifications within the chain notifier.
In this commit we rename the lnrpc.PendingChannelRequest and
lnrpc.PendingChannelResponse to
lnrpc.PendingChannelsRequest/lnrpc.PendingChannelsResponse. We do this
as we strive to ensure that the naming scheme across the RPC interface
is consistent.
On testate as times the fee estimation can swing widely. As we
currently don’t yet use vsize everywhere internally, we’re forced to
manually scale to weight for the moment. If the returned fee rate is
too low, then it can cause our estimate to go to zero. This also has
the effect of meaning that the chanCloser doesn’t currently advance if
the initial starting fee is zero.
In this commit we fix a cosmetic bug within our RPC output for list
channels. We have a policy of always showing SAT instead of mSAT
externally. This led to user confusion, as if Alice or Bob ended up
with a fractional amount of satoshis, then the sum of trimmed amount
would be silently sent to miner’s fees. An example being: Alice ending
up with `8998999 mSAT` (`8998.999 SAT`). Bob similarly ends up with
`1001001 mSAT` (`1001.001 SAT`). `8998.999 + 1001.001 = 10000.0 SAT`.
However, we can't express that fractional amount (totaling `1 SAT`
across both commitment transactions) so it goes to miner fees.
To remedy this on the RPC interface level, we’ll now detect if we have
a dangling satoshi, and properly list it as going towards the miner fee
on the commitment transaction.
Fixes#468.
In this commit, we further constrain the candidacy for an “active”
channel. In addition to being present within the link, it *must* also
have the RemoteNextRevocation set. Otherwise, this indicates that we
haven’t yet processed a FundingLocked message for this channel.
In this commit, the relevant RPC’s have been modified to properly
parse, and pass through the new fee control related parameters for each
of the RPC’s.
For a calls to ListChannels we now only set the
ActiveChannel.Active=true if the link is found by the
htlcswitch. This is done to be able to make it possible
to tell if a newly opened channel has been added to
the htlcswitch, such that we can synchronize on this
during tests before we attempt to close the channel.
This helps catch issues in the RPC tests faster by putting a timeout
on all SendPayment requests. Otherwise, if a payment stalled, the test
would run until the test suite timeout, 10 minutes. Also simplifies
some code with a helper function and using SendPaymentSync where
possible.
In this commit we modify the primary InvoiceRegistry interface within
the package to instead return a direct value for LookupInvoice rather
than a pointer. This fixes an existing race condition wherein a caller
could modify or read the value of the returned invoice.
This commit changes the rpcserver to rely on the new zpay32
package, and support the new payment request options available
in the BOLT-11 invoice format.
This commit modifies the relevant RPC’s to enforce the max payment size
as defined in BOLT-0002. With this commit the largest payment possible
is now 2^32 mSAT, or 4,294,967 satoshis.
This commit adds a new reqQuit channel within SendPayment. The inner
goroutine will use this channel to detect if the request itself has
exited or not. Without this method, we’d possible leak a goroutine if a
client never closed the payment stream.
This commit modifies NewWitnessAddress to return nested p2wkh address.
We do this as this RPC call was put in place to be used within GUI’s to
allow users to deposit funds into their LN wallet. By using nested
p2wkh, we ensure that the generate address that can be used to directly
create channels.
This commit fixes an existing bug that would cause a force closed
channel to stay pending forever. In this instance, if one force closes
a channel while they have a dust output, and restart before the channel
is fully closed, then it wouldn’t have been closed automatically
(within the database) by the autopilot agent.
This commit fixes an issue where if a party force closing a channel,
doesn’t have a non-dust balance, nor any outgoing HTLC’s, then the
channel would never be marked as fully closed within the database.
We ensure that this case is addressed, by inserting a checking to
determine if we have any funds to sweep, marking the channel fully
closed on initial commitment transaction confirmation if not.
This commit adds a bit of a guard to a set of RPC calls. If an RPC call
needs to interact with the server but it hasn’t yet been started. Then
we’ll exit early in order to avoid blocking the call until the server
itself has started.
A recent change to the initialization order of sub-systems within lnd
results in a state where the daemon will wait for the wallet itself to
finish syncing _before_ the server is started. This was interpreted as
a bug by some users, so we’ll make the state of the server more
explicit by returning an error.
This commit ensures that we always clean up the resources that are
created when a new instance of a lnwallet.LightningChannel is
instantiated. The is necessary due to the sigPool that’s now present as
an internal goroutine.
This commit overhauls the way that lnd is created with the goal of
ensuring the chain backends are fully synced up before the daemon
itself starts. The rpcServer has been slightly decoupled from the
server itself s.t we can start the rpcServer independently of the
server. This is required as we’ll now wait (unless we’re in simnet
mode) for the chain to fully sync up before we even _start_ any of the
server’s goroutines.
Previously the integers would either underflow or the floating point
division would result in odd numbers if a node knew of zero channels
within the network graph. We now fix this situation by checking to see
if any channels exist before computing the network stats.
Fixes#211.
In order to not close the payment stream on payment error the additional
field have been added in payment response. Now error from stream Recv()
function means that something has happend inside the client and we unable
to process any payment farther, and error inside the payment response
means, that something wrong has happend with payment itself.
In current commit big shift have been made in direction of unit testable
payments scenarios. Previosly two additional structures have been added
which had been spreaded in the lnd package before, and now we apply
them in the lnd itself:
1. ChannelLink - is an interface which represents the subsystem for
managing the incoming htlc requests, applying the changes to the
channel, and also propagating/forwarding it to htlc switch.
2. Switch - is a central messaging bus for all incoming/outgoing htlc's.
The goal of the switch is forward the incoming/outgoing htlc messages
from one channel to another, and also propagate the settle/fail htlc
messages back to original requester.
With this abtractions the folowing schema becomes nearly complete:
abstraction
^
|
| - - - - - - - - - - - - Lightning - - - - - - - - - - - - -
|
| (Switch) (Switch) (Switch)
| Alice <-- channel link --> Bob <-- channel link --> Carol
|
| - - - - - - - - - - - - - TCP - - - - - - - - - - - - - - -
|
| (Peer) (Peer) (Peer)
| Alice <----- tcp conn --> Bob <---- tcp conn -----> Carol
This commit adds the FeeEstimator interface, which can be used for
future fee calculation implementations. Currently, there is only the
StaticFeeEstimator implementation, which returns the same fee rate for
any transaction.
This commit fixes a slight logic error that could render the
`pendingchannels` RPC unusable if a node was on the reciting end of a
channel force close with no time-locked balance. In such a case the
channel wouldn’t be sent to the utxoNursery, resulting in an “contract
not found error”.
To fix this behavior, we’ve created a typed error that can be checked
within the RPC, thus we no longer treat this routine case as an error
case.
This commit allows users to sign messages with their node's private key
with the SignMessage interface. The signatures are zbase32 encoded for
human readability/paste-ability. Others users can verify that a message
was signed by another node in their channel database with the
VerifyMessage interface.
This commit adds simple non-blocking stop command to lncli, with an
appropriate proto update and implementation within the rpcserver. When
invoked the interrupt handler routine in signal.go with begin the graceful
shutdown of lnd.
This commit modifies the implementation of the new DisconnectPeer RPC
in the following ways:
* all validation has moved from the server to the rpcserver
* rather than iterating over _all_ channels, we now only check the
peer’s channels
* the disconnectPeerMsg now has a public key object
* this allows us to also verify that the user submitted a valid
pub key string
* we now check if a peer was persistent when disconnecting so we can
remove them from the persistent peer map
Issue: 139
This commit contains client-side and server-side functionality
for disconnecting peers. rpc-client calls server side method and sends
message with pubKey.
This commit re-writes the GetNetworkInfo implenetaiton to use a single
database transaction. We’re now able to do this due to the recent
change in the API for the ChannelGraph struct and it’s related objects.
The recent change allows the passed callback to accept a db
transaction, with this, the callback is now able to issue another
traversal routine _within_ the prior one.
This commit fixes a prior oversight in the implementation of
SendPayment that could result in tens of thousands of goroutines
OOM’ing an lnd daemon. Previously we didn’t limit the number of
outstanding payments that were allowed by a client. Users on machines
with a small amount of RAM were reporting crashes when sending a very
large number of payments in a consistent stream. This commit fixes this
issue by now using a semaphore to limit the number of outstanding
payments (and therefore) goroutines allowed in the SendPayment method.
This commit slightly modifies the handling of the Connect RPC to allow
users to omit the port when specifying the target node to connect to.
If the port isn’t specified, then the default p2p port will be used in
place.
This commit modifies address handling in the NodeAnnouncement struct,
switching from net.TCPAddr to []net.Addr. This enables more flexible
address handling with multiple types and multiple addresses for each
node. This commit addresses the first part of issue #131 .
This commit removes all instances of the fastsha256 library and
replaces it with the sha256 library in the standard library. This
change should see a number of performance improvements as the standard
library has highly optimized assembly instructions with use vectorized
instructions as the platform supports.
This commit removes a number of sleeps from the set of current
integration tests by replacing them with a synchronous (w/ a timeout)
block until one or many channels are detected as being open within the
network.
As a result, the tests are now more robust, many flakes have been
eliminated, and finally this shaves a few second off of the integration
testing runs.
This commit modifies the two newly added network announcement hook stop
be at the lightningNode level rather than on the level of the entire
test framework. With this, callers are now able to better utilize the
newly added RPC’s since they can target particular peers and wait for
network messages to be processed rather then depending on a single node
(Alice) for information about the announcements propagated within the
network.
This commit implements the new server-side streaming RPC call within
the current default implementation of the RPC server. With this, the
new functionality can now be used within the integration tests to
achieve a greater degree of synchronization in the tests. As a result,
we should be able to eliminate many of the sleeps lingering within the
tests.
This commit adds a new field to the ListChannels RPC command which
indicates if the peer is currently online or not. This is useful as
UI’s will be able to use this information to communicate the
availability of each channel to an end user.
This commit updates all the RPC’s that deal with querying for data
stored within the graph to the latest version of the public API for the
graph itself.
With the funding manager’s state gaining full durability, it only will
return channels that are currently “pending” as a response to the
PendingChannels RPC call. As a result, the prior edge case where a user
would issue a PendingChannels RPC call mid funding flow is no longer
possible and channels are read from disk rather then from the
fundingMgr’s limbo state.
With the concept of open/pending channels on disk, we now will no
longer show channels under ListChannels that are still pending. This
fixes a slight existing bug wherein channels that weren’t yet open
would be listed in this RPC call since we write to disk immediately
after broadcasting the funding transaction.
In order to facilitate persistence during the funding process, added
the isPending flag to channels so that when the daemon restarts, we can
properly re-initialize the chain notifier and update the state of
channels that were going through the funding process.
github.com/lightningnetwork/lnd master ✗
0m ◒
▶ golint
htlcswitch.go:292:4: should replace numUpdates += 1 with numUpdates++
htlcswitch.go:554:6: var onionId should be onionID
htlcswitch.go:629:7: var onionId should be onionID
lnd_test.go:133:1: context.Context should be the first parameter of a
function
lnd_test.go:177:1: context.Context should be the first parameter of a
function
networktest.go:84:2: struct field nodeId should be nodeID
peer.go:1704:16: should omit 2nd value from range; this loop is
equivalent to `for invoice := range ...`
rpcserver.go:57:6: func newRpcServer should be newRPCServer
github.com/lightningnetwork/lnd master ✗
9m ⚑ ◒ ⍉
▶ go vet
features.go:12: github.com/lightningnetwork/lnd/lnwire.Feature
composite literal uses unkeyed fields
fundingmanager.go:380: no formatting directive in Errorf call
exit status 1
Previously, during the channel funding process, peers sent wire
messages using peer.queueMsg. By switching to server.sendToPeer, the
fundingManager is more resilient to network connection issues or system
restarts during the funding process. With server.sendToPeer, if a peer
gets disconnected, the daemon can attempt to reconnect and continue the
process using the peer’s public key ID.
This commit addresses an edge case which has been discovered by testers
of lnd of testnet. When/if channels get out of sync the unilateral
channel closure of a remote node may go undetected, which causes the
local node to lose their ability to purge the now closed channel from
their database state.
With this commit, if we try to force close a channel but detect it as
double-spent due to a prior commitment transaction being broadcast,
then we simply forget the channel as it has already been closed.
This commit removes the BlockChainIO interface as a dependency to the
LightningChannel struct as the interface is no longer used within the
operation of the LightningChannel.
This commit fixes a potential panic that could arise when one was
attempting to open a channel with the target peer identified by it’s
peerID and an error occurred. In this case, the nodepubKey pointer
would be nil, resulting in a panic when attempting to propagate the
error.
This commit fixes this bug by using a nil byte slice for the node’s
serialized pubkey in the case that the node was identified according to
ti’s peer ID.
This commit moves much of the logic for querying for a potential route,
constructing the HTLC including the Sphinx packet, and sending the
ultimate payment from the rpcServer to the ChannelRouter.
This movement paves the way for muilt-path path finding as well as
adding automatic retry logic to the ChannelRouter. Additionally, by
having the ChannelRouter construct the Sphinx packet, we’ll be able to
also include the proper time-lock and general per-hop-payload
information properly in the future.
This commit slightly optimizes the process of broadcasting a message to
a list of peers, and also sending a set of messages to a target peer.
When broadcasting a message to a set of target peers, we now launch a
goroutine for each send as to not block the ChannelRouter on an
individual send. When sending a set of messages to a target peer, we
now give up the mutex as soon as we’ve access the map, rather than
holding onto it until the sending is complete.
This commit adds a new restriction around funding channels at the
daemon level: lnd nodes will not allow either the initiation or the
acceptance of a channel before the node is fully synced to the best
known chain.
This fixes a class of bug that arises when a new node joins the network
and either attempts to open a channel or has a channel extended to them
before the node is fully synced to the network.
This commit implements the newly added RPC to decode payment requests
passed over the command line or directly via gRPC.
With this tool, users can now examine payment requests they see in the
wild for diagnostic or debugging purposes.
This commit adds a soft-limit for the minimum allowed channel size.
Without this limit a user may inadvertently create an invalid or
unspendable output due to the hard coded fees in a few areas of the
codebase.
This is a temporary measure, and will be removed once we add dynamic
fees into the mix.
This commit augments the server’s response to successful SendPayment
commands by also returning the full path taken in order to fulfill the
payment. With this information, the user now obtains more context about
their payment whcih can be useful when debugging, or just exploring the
capabilities of the daemon.
This commit fixes a slight bug in the interaction between the cli
program and the rpcsever itself. With this commit it’s now again
possible to create a channel with a peer that’s identified by its
peerID, instead of only the pubkey.
This commit modifies the ConnectPeer RPC call and partitions the
behavior of the call into two scenarios: the connection should be
persistent which causes the call to be non-blocking, and the connection
should only attempt to connect once — which causes the call to be
blocking and report any error back to the caller.
As a result, the pendingConnRequest map and the logic around it is no
longer needed.
This commit adds daemon level support for pushing funds as part of the
single funder channel workflow. This new feature allows the user to
open a channel and simultaneously make a channel at the same time which
can improve the UX when setting up a channel for the first time.
This commit makes a large number of minor changes concerning API usage
within the deamon to match the latest version on the upstream btcsuite
libraries.
The major changes are the switch from wire.ShaHash to chainhash.Hash,
and that wire.NewMsgTx() now takes a paramter indicating the version of
the transaction to be created.
This commit adds a much needed feature to the daemon, namely the
ability to force close a channel while the source daemon doesn’t have
an active connection to the counter party. Previously this wasn’t
possible as ALL channel closures were routed through the htlcSwitch
which is only able to trigger a channel closure if the peer is online.
To remedy this, if the closure type is “force” then, we now handle the
channel closure and related RPC streaming updates from the call handler
site of the RPC itself. As a result, there are now only two htlcSwitch
channel closure types: breach, and regular. The logic that’s now in the
rpcSever should likely be refactored into a distinct sub-system, but
getting the initial functionality in is important.
Finally, the channel breach integration test has been modified to skip
connection the peers before attempting the forceful channel closure of
a revoked state as the remote peer no longer needs to be online.
This commit modifies the generated response to an “AddInvoice” RPC by
including an encoded payment request in the response. This change gives
callers a new atomic piece of information that they can present to the
payee, to allow completion of the payment in a seamless manner.
This commit slightly refactors the logic for the new outgoing payment
related RPC’s to more closely match the style of the rest of the
codebase. Additionally the tests have been updated to reflect the
changes to the protos of the new RPC’s.
This commit expands the data returned by the current GetCurrentHeight
to also return the current best block hash, expanding the method into
GetBestBlock. Additionally, the current best BlockHash is also now
displayed within the GetInfo RPC call.
Go-fmt files. Refactored code according to the guidelines.
Enhanced payment test: add error checking
and individual context for each API call.
Add Timestamp field to payment struct.
This commit introduces a new sub-system into the daemon whose job it is
to vigilantly watch for any potential channel breaches throughout the
up-time of the daemon. The logic which was moved from the utxoNursery
in a prior commit now resides within the breachArbiter.
Upon start-up the breachArbiter will query the database for all active
channels, launching a goroutine for each channel in order to be able to
take action if a channel breach is detected. The breachArbiter is also
responsible for notifying the htlcSwitch about channel breaches in
order to black-list the breached linked during any multi-hop forwarding
decisions.
Use [33]byte for graph vertex representation.
Delete unneeded stuff:
1. DeepEqual for graph comparison
2. EdgePath
3. 2-thread BFS
4. Table transfer messages and neighborhood radius
5. Beacons
Refactor:
1. Change ID to Vertex
2. Test use table driven approach
3. Add comments
4. Make graph internal representation private
5. Use wire.OutPoint as EdgeId
6. Decouple routing messages from routing implementation
7. Delete Async methods
8. Delete unneeded channels and priority buffer from manager
9. Delete unneeded interfaces in internal graph realisation
10. Renamed ID to Vertex
This commit modifies the ChannelBalance RPC to fetch the balance from
disk since channels are now able to efficiently retrieved from disk due
to recent index that have been added. Previously this RPC would only
return accurate information if we had an active connection to the
counter party for each channel.
This RPC implements the two new RPC methods added in a prior commit.
This involved a slight refactoring to make use of duplicated code
amongst the sync and async variants of the methods.
This commit modifies both the Sphinx packet generation and processing
for recent updates to the API.
With the version 1 Sphinx specification, the payment hash is now
included in the MACs in order to thwart any potential replay attacks.
As a result, any attempts to replay previous HTLC packets MUST re-use
the same payment hash, meaning that the first-hop node can simply
settle the HTLC immediately, thwarting the attacker.
Additionally, within the Sphinx packet, each hop now gets a per-hop
payload which contains the necessary details (CTLV value, fee, etc) for
the node to successfully forward the payment. This per-hop payload is
protected by a packet-wide MAC.
This commit modifies the existing p2p connection authentication and
encryption scheme to now use the newly designed ‘brontide’
authenticated key agreement scheme for all connections.
Additionally, within the daemon lnwire.NetAddress is now used within
all peers which encapsulates host information, a node’s identity public
key relevant services, and supported bitcoin nets.
This commit takes advantage of the newly added
channeldb.FetchAllChannels method to return the state of all active
channels for the ListChannels RPC command. With this change the state
of all channels can now be queried regardless of if any/all the peers
are currently online.
In a future modification a bit will be added to the channel information
which indicates if the LinkNode the channel was created with is
currently online or not.
This commit modifies the server-side handling of the streaming
SendPayment RPC to launch a new goroutine which is dedicated to reading
new requests from the client from the bi-directional stream. This
modification decouples error handling from stream reading allowing
errors to be returned to the client as the arise rather than after the
next payment has been sent.
This commit adds a few workarounds in order to concurrently support the
REST proxy as well as the regular gRPC interface. Additionally,
concrete support for the following RPC calls has been added:
GetTransactions, SubscriptTransactions, SubscribeInvoices, and
NewWitnessAddress.
This commit modifies the on-disk storage of invoices to stop the
optional fields (memo+receipt) on-disk as variable length byte arrays.
This change saves space as the optional fields now only take up as much
space as is strictly needed, rather than always being padded out to max
size (1KB).
This commit modifies the sendpayment command slightly to use the pub
key of the *first* hop within the route as the destination within the
htlcPacket sent to the htlcSwitch.
Previously, since only single hop was implemented, the final
destination would be set within the htlcPkt, causing the route to fail
as the switch doesn’t have a direct link to the dest in the multi-hop
case.
This commit alters the send/receive HTLC pipe line a bit in order to
fully integrate onion routing into the daemon.
The server now stores the global Sphinx router which all active
htlcManagers will used when processing upstream HTLC add messages.
Currently the onion routing private key is static, and identical to the
node’s current identity public key. In the future this key will be
rotated daily the node based on the current block hash.
When sending a payment via the SendPayment RPC, the routing manager is
now queried for the existence of a route before the payment request is
sent to the HTLC switch. If a path is found, then a Sphinx onion packet
encoding the route is created, then populated within the HTLC add
message.
Finally, when processing an upstream HTLC add request, the sphinx
packet is decoded, then processed by the target peer. If the peer is
indicated as the exit node, then the HTLC is queue’d to be settled
within the next state update.
This commit adds a new configuration parameter to the deamon:
‘DebugHTLC’. When true, all outgoing HTLC’s sent via the RPC interface
will be sent paying to a special rHash value which all lnd nodes also
with the flag activated know the preimage to. Therefore all payments
sent to a 1-hop node will immediately be settled by that node.
By default, this flag is false, it it only intended to be used to
exercise local changes to 1-hop behavior manually.
This commit adds a new RPC command: `channelbalance` which returns the
sum of all available channel capacity across all open channels. The
total balance is currently returned in units of `satoshis`. Additionally
the `networkHarness` has been modified slightly to allow specifying the
additional "extra" command line parameters when creating the initial
seed nodes. Minor refactoring within the integration tests has been
undertaken in order to increase code re-use across tests.
Closes#29.
This commit includes some slight refactoring to properly execute force
closures which are initiated by RPC clients.
The CloseLink method within the htlcSwitch has been extended to take an
additional parameter which indicates if the link should be closed
forcefully. If so, then the channelManager which dispatches the request
executes a force closure using the target channel state machine. Once
the closing transaction has been broadcast, the summary is sent to the
utxoNursery so the outputs can be swept once they’re mature.
LIGHT-131, LIGHT-140, LIGHT-138
`lncli showroutingtable` may output routing table as image.
Use graphviz for graph rendering.
Add explicit version dependency for tools. Add error checking.
LIGHT-133, LIGHT-138 Make output of `lncli showrouting table` in
two different formats: table and json.
Instead of sending serialized routing table send list of channels.
This commit adds a new feature to the network harness enabling callers
to receive async notifications once a particular transaction is seen on
the network. Such a feature is useful when due to the asynchronous
behavior of node communications.
With this new feature, tests can now wait for a particular transaction
to be seen within the network before proceeding.
This commit modifies the internal workflow for opening or closing a
channel in order to create a path in which RPC clients can receive
updates. Updates are now communicated via channels from the goroutines
spawned by the RPC server to process the request, and the sub-system
within the daemon that actually executes the request.
With this change clients can now receive updates that the request is
pending (final message has been sent to the target client), or that the
request has been completed. Confirmation related updates have not yet
been implemented as that will require some changes to the ChainNotifier
interface.
This commit integrates BitFury's current routing functionality into lnd. The
primary ochestration point for the routing sub-system in the routingMgr. The
routingMgr manages all persistent and volatile state related to routing within
the network.
Newly opened channels, either when the initiator or responder are inserted into
the routing table once the channel is fully open. Once new links are inserted
the routingMgr can then perform path selection in order to locate an "optimal"
path to a target destination.
With this commit, support for changing the target network (testnet,
simnet, etc) has been finalized. Previously a command line option was
present to swap networks, but the RPC port wouldn’t automatically be
updated to reflect the network.
This commit implements the “pendingchannels” RPC within the rpcserver.
This RPC allows callers to receive details concerning the current
pending channels associated with the daemon. Pending channels are those
waiting for additional confirmations before they can be considered
opened/closed.
At the time of this commit, only open channels are shown. A future
commit will also add the confirmation updates, along with information
for close channels.
This commit switches the implementation of the open/close channel RPC’s
from a fully blocking synchronous model to one that’s async by default,
allowing callers to add a sync wrapper.
The new proto specs also allow for “updates” for the pending channels
in the form of new confirmations which progress the pending status of
the channel. At this point, only the final open/close updates have been
implemented. Obtaining confirmation notifications requires a bit of
re-working within the current ChainNotifier interface, thus this has
been deferred to a later time.
This commit implements the “send coins” RPC request which was
introduced at both the lnrpc and command line level in a prior commit.
A small refactoring has taken place w.r.t to sendmany+sendcoins in
order to eliminate some code duplication.
This commit fixes a bug introduced within a prior commit. The prior
commit failed to drollery reverse the txid string taken in as user
input, therefore in order to properly close a channel, the user needed
to manually reverse the txid themselves.
With this change, `wire.NewShaHashFromStr` is used which properly
reverses the string within the constructor. This allows the string
reported not be directly used to the close an active channel.
This commit also corrects a few logging messages.
This commit adds the necessary plumbing within the server, peer, and
rpcServer to handle opening and cooperatively closing a channel with a
remote peer.
Many new data structures have been added to the peer in order to allow
it to efficiently manage opening+.losing new/existing lightning
channels. Additional documentation has been added to several methods
within the peer struct, with some minor renaming along with way. The
peer has also gained a dedicated goroutine whose job it is to manage
any requests pertaining to opening, or closing any channels with the
remote peer.
The messages have been added to lnrpc define the requests and responses
to channel open+close messages. Additional channel logic has been added
between the rpcServer, peer, and server in order to properly manage the
necessary synchronization.
The new available address types are: regular p2pkh, p2wkh, and finally
p2wkh nested within p2sh. The latter address type will initially be
used to allow users to “fund” the lnd wallet.
