In the "multiple channel creation" test, in some cases the
responder (Bob) was not yet considering the first channel
to be opened (activeReservation still not deleted in
fundingManager) when Alice tried to open the second channel.
This would cause the test to fail. This commit adds a small
sleep before the creation of the second channel, to give
Bob some time to finish the opening process.
This commit updates the integration tests to reflect the reality after
removing code that would always attempt to increment the current update
timestamp by one for each channel announcement. Without connecting
directly to carol, it isn’t guaranteed that Alice will receive that
announcement as Bob would have already processed one for Carol when
their channel was created.
Make the fundingmanager send an updated node announcement
each time it opens a new channel. This is to make sure
our node announcement is propagated in the network, since
peers will ignore our node announcements if we haven't
opened any channels yet.
Within the network, it's important that when an HTLC forwarding failure
occurs, the recipient is notified in a timely manner in order to ensure
that errors are graceful and not unknown. For that reason with
accordance to BOLT №4 onion failure obfuscation have been added.
This commit fixes a minor bug in the goroutine that’s launched to check
the sync status of a particular node. Previously, the goroutine could
end up infinitely stuck on a send as once the chain has been detected
as synced, it didn't exit.
We fix this now by ensure that the goroutine always terminates after
the initial notification to the caller. Additionally, we not ensure
that both the internal and exterior goroutine are both reading off of
the peer’s quit channel.
This commit modifies the travis build script, and our local test script
to ensure that the race condition builds are conducted in a parallel
build. After this commit two travis builds will be kicked off for each
push/commit: one that runs the race condition tests in isolation, and
another that runs the integration tests then the coverage tests.
In order to do the above cleanly, the integration tests are now guarded
behind a build flag. In order to run the integration tests, one now
needs to specify the `-tags rpctest` flag when running the `go test`
command.
In this commit additional test have been added which tests the ability
of Alice and Bob asynchroniously exchange the payment between each
other. This scenario will be higly frequent in the payment between
payment providers.
In order to not close the payment stream on payment error the additional
field have been added in payment response. Now error from stream Recv()
function means that something has happend inside the client and we unable
to process any payment farther, and error inside the payment response
means, that something wrong has happend with payment itself.
This commit replaces the hard-coded 5000 satoshi fees with calls to the
FeeEstimator interface. This should provide a way to cleanly plug in
additional fee calculation algorithms in the future. This change
affected quite a few tests. When possible, the tests were changed to
assert amounts sent rather than balances so that fees wouldn't need to
be taken into account. There were several tests for which this wasn't
possible, so calls to the static fee calculator were made.
This commit changes the SingleHop and MultiHop integration tests to
assert amounts sent rather than balances. Because fees can be odd
amounts, this change makes it such that fee amounts don't need to be
explicitly taken into account in the tests.
This commit changes t.Fatal to t.Fatalf in TestCheckDustLimit so as to
provide more information. This commit also makes some column width
adjustments and minor spelling/formatting changes.
This commit allows users to sign messages with their node's private key
with the SignMessage interface. The signatures are zbase32 encoded for
human readability/paste-ability. Others users can verify that a message
was signed by another node in their channel database with the
VerifyMessage interface.
This commit fixes a prior bug wherein if a user connected to a peer
using the —perm command, then once the peer was disconnected, we
wouldn’t automatically connect to them.
Issue: 139
This commit contains test case "disconnecting target peer" (second test case) which takes two
connected peers, then checks via assert method one connection exists,
then disconnects this remote peer by passing pubKey parameter (just some string) into RPC-call method. Then checks 0
connection exists, and then connects disconnected peer for passing
further tests, and then checks one connection exists.
The recent multi-chain features resulted in a new directory structure
that wasn’t properly observed by the integration tests. This commit
fixes a prior bug that wouldn’t allow the test to copy the prior
revoked channels to the current state.
This commit is tied to the prior commit and it patches up a lingering
race condition and deadlock that can arise due to now properly waiting
for all goroutine to exit before concluding the shutdown process.
This commit modifies the testNodeAnnouncment to no longer open a
channel for the duration of the test. As the test is only exercising
the proper behavior of announcement propagation and doesn’t require a
channel to be open for the duration. Also we now properly shutdown the
created “dave” node, as it’s no longer needed after the tests
concludes.
Use addresses and ports from NodeAnnouncement messages for reconnection
attempts. For those nodes that don't explicitly report IP addresses, use
the IP address from previous connections connection request along with
the default peer port number.
Minor change to server.go to add ExternalIPs to
channeldb.LightningNode. Also, added a test that utilizes this
functionality and exercises multiple addresses in NodeAnnouncement.
This commit removes a number of sleeps from the set of current
integration tests by replacing them with a synchronous (w/ a timeout)
block until one or many channels are detected as being open within the
network.
As a result, the tests are now more robust, many flakes have been
eliminated, and finally this shaves a few second off of the integration
testing runs.
This commit modifies the two newly added network announcement hook stop
be at the lightningNode level rather than on the level of the entire
test framework. With this, callers are now able to better utilize the
newly added RPC’s since they can target particular peers and wait for
network messages to be processed rather then depending on a single node
(Alice) for information about the announcements propagated within the
network.
This commit adds the FundingManagerPersistence test to ensure that the
funding process completes as expected when nodes shutdown after the the
funding transaction has been broadcast. Note that the final parts of
several wallet tests have been removed, as functionality has been moved
to the Funding Manager and should now be tested there.
github.com/lightningnetwork/lnd master ✗
0m ◒
▶ golint
htlcswitch.go:292:4: should replace numUpdates += 1 with numUpdates++
htlcswitch.go:554:6: var onionId should be onionID
htlcswitch.go:629:7: var onionId should be onionID
lnd_test.go:133:1: context.Context should be the first parameter of a
function
lnd_test.go:177:1: context.Context should be the first parameter of a
function
networktest.go:84:2: struct field nodeId should be nodeID
peer.go:1704:16: should omit 2nd value from range; this loop is
equivalent to `for invoice := range ...`
rpcserver.go:57:6: func newRpcServer should be newRPCServer
github.com/lightningnetwork/lnd master ✗
9m ⚑ ◒ ⍉
▶ go vet
features.go:12: github.com/lightningnetwork/lnd/lnwire.Feature
composite literal uses unkeyed fields
fundingmanager.go:380: no formatting directive in Errorf call
exit status 1
In this commit we modify the testSingleHopInvoice test to ensure that
we obtain the proper preimage from the SendPayment RPC upon successful
payment completion.
This commit adds a new assertion in the channel force closure test in
order to exercise the fix for a bug related to channel force closure
implemented in a prior commit. With this new assertion, we ensure that
bob is aware of his on-chain balance after a force channel closure
initiated by alice.
This commit elminates a sleep in the testHtlcErrorPropagation test by
instead polling for the existence of our target in a tight loop. This
is a small patch over until we get a “topology client” within the
ChannelRouter. This method is robust and can be applied in future tests
until we get the notification client into the ChannelRouter.
This commit slightly optimizes the process of broadcasting a message to
a list of peers, and also sending a set of messages to a target peer.
When broadcasting a message to a set of target peers, we now launch a
goroutine for each send as to not block the ChannelRouter on an
individual send. When sending a set of messages to a target peer, we
now give up the mutex as soon as we’ve access the map, rather than
holding onto it until the sending is complete.
This commit adds a new restriction around funding channels at the
daemon level: lnd nodes will not allow either the initiation or the
acceptance of a channel before the node is fully synced to the best
known chain.
This fixes a class of bug that arises when a new node joins the network
and either attempts to open a channel or has a channel extended to them
before the node is fully synced to the network.
This commit implements the newly added RPC to decode payment requests
passed over the command line or directly via gRPC.
With this tool, users can now examine payment requests they see in the
wild for diagnostic or debugging purposes.
This commit adds support for pushing funds during the funding process
to the helper method in the integration testing framework.
Additionally, we also modify the simple testBasicChannelFunding test to
also push over an amount in order to test the functionality within the
daemon.
With this commit we have gained a new interaction tests which excursus
all the possible multi-hop error cases aside from:
* sphinx packet corruption
The case can’t be adequately tested with the current integration
testing framework as we can’t arbitrary modify packets en route to
peers within the proto test network. In a future commit, the p2p test
framework whcih has been started by andrew.shvv will be used to ensure
proper handling of this error.
This commit ensures that any extra nodes that were created as part of
the integration tests are shutdown at the end of the test after it
completes successfully. This should speed up the tests as we’ll no
longer have lingering nodes in the background of the test consuming
resources.
This commit adds an additional test case to the `testSingleHopInvoice`
test in order to exercise the proper parsing and dispatching of encoded
payment requests using the zpay32 encoding scheme.
With this test we ensure that the daemon properly encodes payreq’s upon
the creation of invoices, and also that the SendPayment RPC is able to
parse the payment request and properly complete a payment based off of
one.
testMultiHopPayments was failing intermittently due to a lack of
thread-safety in the gRPC stream. This commit takes payment sending out
of goroutines so that they execute serially.
This commit makes a large number of minor changes concerning API usage
within the deamon to match the latest version on the upstream btcsuite
libraries.
The major changes are the switch from wire.ShaHash to chainhash.Hash,
and that wire.NewMsgTx() now takes a paramter indicating the version of
the transaction to be created.
As we’re switching to a more up to date btcd branch that properly
guards the activation of the soft-forks we rely on, we’ll also need to
ensure the two soft-forks have activated.
Moved transaction states from in-memory maps to persistent BoltDB
buckets. This allows channel force closes to operate reliably if the
daemon is shut down and restarted at any point during the forced
channel closure process.
This commit adds a much needed feature to the daemon, namely the
ability to force close a channel while the source daemon doesn’t have
an active connection to the counter party. Previously this wasn’t
possible as ALL channel closures were routed through the htlcSwitch
which is only able to trigger a channel closure if the peer is online.
To remedy this, if the closure type is “force” then, we now handle the
channel closure and related RPC streaming updates from the call handler
site of the RPC itself. As a result, there are now only two htlcSwitch
channel closure types: breach, and regular. The logic that’s now in the
rpcSever should likely be refactored into a distinct sub-system, but
getting the initial functionality in is important.
Finally, the channel breach integration test has been modified to skip
connection the peers before attempting the forceful channel closure of
a revoked state as the remote peer no longer needs to be online.
This commit adds a short sleep before a channel assertion in the
`testMaxPendingChannels` test. This sleep serves to give the nodes
enough time to propagate the new channel announcement over the
authenticated gossip system. Without this sleep, the call may be issued
in a state wherein only half of the channel announcement has fully
propagated.
This commit slightly refactors the logic for the new outgoing payment
related RPC’s to more closely match the style of the rest of the
codebase. Additionally the tests have been updated to reflect the
changes to the protos of the new RPC’s.
Go-fmt files. Refactored code according to the guidelines.
Enhanced payment test: add error checking
and individual context for each API call.
Add Timestamp field to payment struct.
This commit modifies the channel closing logic to remove the hard coded
bools indicating which side is attempting the closure. With the recent
changes, the initiator must always pay the channel closure fees.
This information is recently stored on disk, therefore we can use the
boolean to ensure that the closure transaction is created properly no
matter who initiates the close.
This fixes a bug.
This commit introduces a new sub-system into the daemon whose job it is
to vigilantly watch for any potential channel breaches throughout the
up-time of the daemon. The logic which was moved from the utxoNursery
in a prior commit now resides within the breachArbiter.
Upon start-up the breachArbiter will query the database for all active
channels, launching a goroutine for each channel in order to be able to
take action if a channel breach is detected. The breachArbiter is also
responsible for notifying the htlcSwitch about channel breaches in
order to black-list the breached linked during any multi-hop forwarding
decisions.
This commit modifies the invoices generated during the
testRevokedCloseRetribution integration test to ensure that the
invoices are globally unique within the context of the integration
tests.
This commit adds a new rather extensive integration tests to excerise
uncooperative channel breaches triggered by a counter-party
broadcasting a previously revoked commitment state.
In order to programmatically script such logic using the integration
testing framework, the test manually manipulates the database files of
one of the nodes within the test network in order to force Bob to
travel back in time to a revoked commitment state. With this
manipulation, we then force Bob to broadcast the revoked state,
triggering Alice’s retribution logic which sweeps ALL the funds within
the channel.
This commit slightly modifies the existing CT struct in order to
maintain consistency with code-style. As a result of the name change,
all references have also been renamed from `ct` to `t`.
The Error and Errorf methods have been removed in favor of forcing
everything to be reported via `Fatalf`. Additionally a new method
(ProcessErrors) has been introduced to the networkHarness class in
order to encapsulate the underlying channel.
This commit uses the context package’s WithTimeout to ensure tests
which rely on asynchrony behaviors cannot block the execution of the
integration tests for ever. All tests which rely on async gRPC
notifications now perform a 3 way select: on the timeout channel
closure, an error, and the response itself.
Additionally some slight refactoring has taken place within the current
set of integration tests, eliminating some unneeded factory functions.
This commit adds a new RPC command: `channelbalance` which returns the
sum of all available channel capacity across all open channels. The
total balance is currently returned in units of `satoshis`. Additionally
the `networkHarness` has been modified slightly to allow specifying the
additional "extra" command line parameters when creating the initial
seed nodes. Minor refactoring within the integration tests has been
undertaken in order to increase code re-use across tests.
Closes#29.
This commit adds a basic test to exercise the scenario of forced
channel closure between to nodes with an existing channel open. The
test ensures that the latest commitment transaction it broadcast to the
chain and additionally that all time-locked outputs are sweeped with a
single transaction as soon as the inputs are mature enough.
At times when testing one requires access to the logs of a particular
node in order to aide with debugging. Before this commit, one needed to
manually modify the networkHarness code in order to print either the
location of the logs or the logs themselves. With this commit, tests
can now programmatically examine the logs of any node created within
the networkHarness.
It’s worth noting that at times the logs dumped may not be the most up
to date version of the logs files as the logging library employs
intermediate buffering.
This commit fixes some flakiness exhibited in the current basic funding
workflow tests. This test can fail occasionally in resource constrained
environment due to a race condition which arises after Alice learns of
the channel, but Bob is still waiting for Alice’s notification. As a
temporary fix, we now only check Alice’s state for the existence of the
channel.
This commit adds some new networkHarness helper methods which are
mean’t to reduce the verbosity of the previous basic tests, and also to
enable developers to right tests mote easily five a higher level
interface.
This commit increases the robustness of the current test and also
reduces it’s running time considerably as all “time.Sleep”s have now
been removed.
Rather than sleeping some random amount of time, the test now waits for
a particular async notification to be dispatched before proceeding.
This tightens up the execution of the tests quite a bit.
This commit adds a new feature to the network harness enabling callers
to receive async notifications once a particular transaction is seen on
the network. Such a feature is useful when due to the asynchronous
behavior of node communications.
With this new feature, tests can now wait for a particular transaction
to be seen within the network before proceeding.
This commit fixes the build for version 1.6.3 of golang. In go 1.7, the
“context” package was moved into the standard library, however go 1.6.3
doesn’t have that change, so we must refer to the prior WIP package
until a new version of Go is released.
