Messages:
- UpdateFulfillHTLC
- UpdateFee
- UpdateFailMalformedHTLC
- UpdateFailHTLC
- UpdateAddHTLC
- Shutdown
- RevokeAndAck
- ReplyShortChanIDsEnd
- ReplyChannelRange
- QueryShortChanIDs
- QueryChannelRange
- NodeAnnouncement
- Init
- GossipTimestampRange
- FundingSigned
- FundingLocked
- FundingCreated
- CommitSig
- ClosingSigned
- ChannelUpdate
- ChannelReestablish
- ChannelAnnouncement
- AnnounceSignatures
lnwire: update quickcheck tests, use constant for Error
multi: update unit tests to pass deep equal assertions with messages
In this commit, we update a series of unit tests in the code base to now
pass due to the new wire message encode/decode logic. In many instances,
we'll now manually set the extra bytes to an empty byte slice to avoid
comparisons that fail due to one message having an empty byte slice and
the other having a nil pointer.
This commit caps the update fee the initiator will send when the anchors
channel type is used. We do not limit anything on the receiver side.
10 sat/vbyte is the current default max fee rate we use. This should be
enough to ensure propagation before anchoring down the commitment
transaction.
* mod: bump btcwallet version to accept db timeout
* btcwallet: add DBTimeOut in config
* kvdb: add database timeout option for bbolt
This commit adds a DBTimeout option in bbolt config. The relevant
functions walletdb.Open/Create are updated to use this config. In
addition, the bolt compacter also applies the new timeout option.
* channeldb: add DBTimeout in db options
This commit adds the DBTimeout option for channeldb. A new unit
test file is created to test the default options. In addition,
the params used in kvdb.Create inside channeldb_test is updated
with a DefaultDBTimeout value.
* contractcourt+routing: use DBTimeout in kvdb
This commit touches multiple test files in contractcourt and routing.
The call of function kvdb.Create and kvdb.Open are now updated with
the new param DBTimeout, using the default value kvdb.DefaultDBTimeout.
* lncfg: add DBTimeout option in db config
The DBTimeout option is added to db config. A new unit test is
added to check the default DB config is created as expected.
* migration: add DBTimeout param in kvdb.Create/kvdb.Open
* keychain: update tests to use DBTimeout param
* htlcswitch+chainreg: add DBTimeout option
* macaroons: support DBTimeout config in creation
This commit adds the DBTimeout during the creation of macaroons.db.
The usage of kvdb.Create and kvdb.Open in its tests are updated with
a timeout value using kvdb.DefaultDBTimeout.
* walletunlocker: add dbTimeout option in UnlockerService
This commit adds a new param, dbTimeout, during the creation of
UnlockerService. This param is then passed to wallet.NewLoader
inside various service calls, specifying a timeout value to be
used when opening the bbolt. In addition, the macaroonService
is also called with this dbTimeout param.
* watchtower/wtdb: add dbTimeout param during creation
This commit adds the dbTimeout param for the creation of both
watchtower.db and wtclient.db.
* multi: add db timeout param for walletdb.Create
This commit adds the db timeout param for the function call
walletdb.Create. It touches only the test files found in chainntnfs,
lnwallet, and routing.
* lnd: pass DBTimeout config to relevant services
This commit enables lnd to pass the DBTimeout config to the following
services/config/functions,
- chainControlConfig
- walletunlocker
- wallet.NewLoader
- macaroons
- watchtower
In addition, the usage of wallet.Create is updated too.
* sample-config: add dbtimeout option
outdated local state
This commit fixes a bug that would cause us to not sweep our local
output in case we force closed, then lost state or attempted recovery.
The reason being that we would use or local commit height when deriving
our scripts, which would be incorrect. Instead we use the extracted
state number to derive the correct scripts, allowing us to sweep the
output.
Allthough being an unlikely scenario, we would leave money on chain in
this case without any warning (since we would just end up with an empty
delay script) and forget about the spend.
Similar to the previous commit, we fix a bug resulting in the wrong
commit weight being calculated when an HTLC just above the remote's
duslimit was added from the remote. This was a result of using the
successFee instead of the timeoutFee when checking whether it was dust,
making us consider it dust when it shouldn't have been.
In this commit we fix a bug resulting in the wrong commit weight being
calculated when an HTLC just below the remote's duslimit was added. This
was a result of using the timeoutFee instead of the successFee when
checking whether it was dust, making us consider it non-dust when it
should have been.
Without this change the high-fee logic is never tested as it is instead caught by the dust-output logic. This change uses a higher fee rate to ensure an output value above the dust limit, while still spending 20% on fees.
To allow nodes more control over the amount of time that their funds
will be locked up, we add a MaxLocalCSVDelay option which sets the
maximum csv delay we will accept for all channels. We default to the
existing constant of 10000, and set a sane minimum on this value so that
clients cannot set unreasonably low maximum csv delays which will result
in their node rejecting all channels.
A while back, changes were made to the wallet such that it waits for the
backend to be synced before beginning to store the latest 10,000 blocks
of the chain. This inherently broke sync progress implementations based
on the best_header_timestamp result from the GetInfo RPC for
neutrino-based nodes as the wallet is no longer tracking all blocks in
the chain. To work around this, we now make sure to return the backend's
best header timestamp instead of the wallet's, allowing said sync
progress implementations to work again.
For unconfirmed commit tx anchors, supply the sweeper with cpfp info and
a confirmation target fee estimate.
The sweeper will try to pay for the parent commit tx as long as the
current fee estimate exceeds the pre-signed commit tx fee rate.
- let users specify their MAXIMUM WUMBO with new config option which sets the maximum channel size lnd will accept
- current implementation is a simple check by the fundingManager rather than anything to do with the ChannelAcceptor
- Add test cases which verify that maximum channel limit is respected for wumbo/non-wumbo channels
- use --maxchansize 0 value to distinguish set/unset config. If user sets max value to 0 it will not do anything as 0 is currently used to indicate to the funding manager that the limit should not be enforced. This seems justifiable since --maxchansize=0 doesn't seem to make sense at first glance.
- add integration test case to ensure that config parsing and valiation is proper. I simplified the funding managers check electing to rely on config.go to correctly parse and set up either i) non wumbo default limit of 0.16 BTC OR ii) wumbo default soft limit of 10 BTC
Addresses: https://github.com/lightningnetwork/lnd/issues/4557
To be spec compliant, we require the initiator to not pay the anchor
values into fees on coop close. We extract the balance calculation into
commitment.go, and add back the value of the anchors to the initiator's
balance.
Externally funded channels are expected by the user and explicitly
registered through the use of a funding shim and should therefore not
count towards the max pending channel count which is primarily there to
mitigate DoS attacks.
Previously whether or not to add test htlcs was implictly controlled by
a nil value of the HtlcDescs test parameter. With the conversion to
json, that nil value got lost.
The reason that the test still passed is because with the fee rate of
the no-htlc test case, the htlcs were trimmed. Also because in the test
json, balances are specified after applying htlcs, the test didn't fail
with a mismatching balance.
In this commit, we make a new wrapper method around the internal
`WalletController` method to ensure it holds the coin select mutex while
the balance is being computed.
This commit includes a regression test that checks that we remember
to restore updates that we sent to the peer but they haven't sent
us a signature for yet.
This fixes a long-standing force close bug. When we receive a
revocation, store the updates that the remote should sign next under
a new database key. Previously, these were not persisted which would
lead to force closure.
Follow up labelling of external transactions with labels for the
transaction types we create within lnd. Since these labels will live
a life of string matching, a version number and rigid format is added
so that string matching is less painful. We start out with channel ID,
where available, and a transaction "type". External labels, added in a
previous PR, are not updated to this new versioned label because they
are not lnd-initiated transactions. Label matching can check this case,
then check for a version number.
Previously, we could sign a pending commitment for the remote party,
disconnect, and not restore these signed remote updates as having been
removed at the pending commitment height. This commit fixes that to
look up whether the update under the unsigned acked updates key is
present on the pending commitment or not and appropriately set
the remove commit heights.
This commit moves the deletion of all updates under the unsigned
acked updates key from AppendRemoteCommitChain to
AdvanceCommitChainTail. This is done because if we went down after
signing for these updates but before receiving a revocation, we would
incorrectly reject their commitment signature:
Alice Bob
-----add----->
-----sig----->
<----rev------
<----sig------
-----rev----->
<----fail-----
<----sig------
-----rev----->
-----sig----->
*reconnect*
<----rev------
<----add------
x----sig------
It is also important to note that filtering is required when we
receive a revocation to ensure that we aren't erroneously deleting
remote updates. Take the following state transitions:
Alice Bob
-----add----->
-----sig----->
<----rev------
<----sig------
-----rev----->
-----add----->
-----sig----->
<----fail-----
<----sig------
-----rev-----> (alice stores updates here)
<----rev------
In the above case, if Alice deleted all updates rather than filtering
when receiving the final revocation from Bob, then Alice would have
to force close the channel due to missing updates. Since Alice hasn't
signed for any of the unsigned acked updates, she should not filter any
of them out.
The `restoreStateLogs` function now properly restores the
`addCommitHeightLocal` field of a settle or fail's parent add.
Previously, any updates' parent in unsignedAckedUpdates would have
the field set to the default value of 0. This would cause a force
closure when receiving a commitment due to our belt-and-suspenders
checks for update logs during commitment validation.
The bug in question occurs because the `addCommitHeightLocal` field
is only populated for a restored add if the add is on the local
commitment. `TestChannelRestoreCommitHeight` is expanded in
`lnwallet/channel_test.go` to demonstrate restoration now works.
The faulty state transition:
```
<----fail----
<----sig-----
-----rev----> (add no longer on Alice's commitment)
*Alice restores* (addCommitHeightLocal of failed htlc is 0)
```
NOTE: Alice dies after sending a revocation but before signing a
commitment. This is possible because there is a select block in the link
that can potentially exit after sending over the revocation but before
signing the next commitment state for the counterparty.
The first channels of a batch shouldn't publish the batch TX
to avoid problems if some of the funding flows can't be completed.
Only the last channel of a batch should publish. We set the channel flag
accordingly depending on the flag in the assembler.
This is useful when we wish to have a channel frozen for a specific
amount of blocks after its confirmation. This could also be done with an
absolute thaw height, but it does not suit cases where a strict block
delta needs to be enforced, as it's not possible to know for certain
when a channel will be included in the chain. To work around this, we
add a relative interpretation of the field, where if its value is below
500,000, then it's interpreted as a relative height. This approach
allows us to prevent further database modifications to account for a
relative thaw height.
This commit changes the verification of our code against the spec test
vectors to use a more black box approach. It exercises the channel state
machine via its external interface as much as possible, making this test
more robust. A consequence of this is that the test now runs from the
'root' data from which the test vectors are also derived, meaning that
more code is covered too.
Running from the root data is also a preparation for _producing_ test
vectors for the new anchor commitment format. This will be a matter of
changing the channel type and recording the produced commitment and htlc
txes.
Previously the success transaction was skipped during verification. With
this commit, the proper preimage insertion is carried out, allowing the
success tx to be checked too.
Introduces a new chancloser package which exposes a ChanCloser
struct that handles the cooperative channel closure negotiation
and is meant to replace chancloser.go in the lnd package. Updates
all references to chancloser.go to instead use chancloser package.
The current implementation of LeaseOutput already checked whether the
output had already been leased by the persisted implementation, but not
the in-memory one used by lnd internally. Without this check, we could
potentially end up with a double spend error if lnd acquired the UTXO
internally before the LeaseOutput call.
Add label parameter to PublishTransaction in WalletController
interface. A labels package is added to store generic labels that are
used for the different types of transactions that are published by lnd.
To keep commit size down, the two endpoints that require a label
parameter be passed down have a todo added, which will be removed in
subsequent commits.
