This commit modifies the generated response to an “AddInvoice” RPC by
including an encoded payment request in the response. This change gives
callers a new atomic piece of information that they can present to the
payee, to allow completion of the payment in a seamless manner.
This commit adds a new package “zpay32”: which is used within the
daemon to encode/decode payment requests. A payment request currently
consists of: the public key of the payee, the payment hash to use, and
finally the amount to send over the network. The encoded payment
request consists of the mentioned fields concatenated to each other, a
cc32 checksum is added, then the blob is finally encoded using zbas32.
I call the resulting scheme “zpay32”.
A number of extensions may be explored in future commits including
adding a version byte, adding “hint” routing information,
cryptographically signed receipts and more,
This commit slightly refactors the logic for the new outgoing payment
related RPC’s to more closely match the style of the rest of the
codebase. Additionally the tests have been updated to reflect the
changes to the protos of the new RPC’s.
This commit modifies the error propagating behavior within the
HasChannelEdge struct. Rather than exiting the function early when a
single edge isn’t found, we instead continue to also possibly retrieve
the second directional edge.
With this change, we avoid a potential infinite gossiping loop in the
routing package that would result if we’d seen one edge but not the
other. In this case the timestamps returned for *both* edges would
always be zero, causing the daemon to always accept and rebroadcast the
announcement putting all other connected lnd’s into the same loop.
This commit modifies the new payment module within the database to
match the coding style of the rest of the package and the project as a
hole. Additionally, a few fields have been renamed, and the extra
timestamp added to the OutgoingPayment struct has been removed as
there’s already a CreationTime field within the Invoice struct that’s
embedded within the OutgoingPayment struct.
This commit fixes s bug in the breachArbiter which was introduced
during the change that added the live channel hand off from an active
peer. Rather than closing the settle channel of the _older_
breachObserver, the settle channel of the newer beachObserver was being
closed. This would result in a panic once the channel itself was
actually settled as the channel would be closed again.
To fix this bug, we now properly close the channel of the old settle
signal instead of the new one.
This commit partially rectifies a quick hack that was previously thrown
in to address an issue discovered due to possible state inconsistencies
between an active channel object and the daemon’s breachAbrbiter.
A prior commit has modified the interaction between the peer and the
breachArbiter to eliminate the state in consistency. Therefore, we no
longer need to access the database to ensure that we’re observing the
latest channel state in order to correctly make a decision about
whether a broadcast commitment transaction is a breach or not.
This commit modifies the interaction between the breachArbiter and the
peer struct such that the breachArbiter _always_ has the latest version
of a contract.
Prior to this commit once we connected out to a peer which we had an
active contract with and the breachArbiter was watching, we’d have two
copies of the channel in memory, instead of just a single one. This was
wasteful and caused some duplicated log messages due to two instances
of the channel being active.
This commit adds support for the newly added channel graph related
commands: describegraph, getchaninfo, getnodeinfo, queryroute, and
finally getnetworkinfo.
This commit adds a number of new RPC’s which allow users to query data
that’s now exposed as part of the new routing package: DescribeGraph,
GetChanInfo, GetNodeInfo, QueryRoute, GetNetworkInfo, and SetAlias.
As a result the former ShowRoutingTable command has been removed as the
underlying graph representation has changed.
This commit fully integrates the ChannelRouter of the new routing
package into the main lnd daemon.
A number of changes have been made to properly support the new
authenticated gossiping scheme.
Two new messages have been added to the server which allow outside
services to: send a message to all peers possible excluding one, and
send a series of messages to a single peer. These two new capabilities
are used by the ChannelRouter to gossip new accepted announcements and
also to synchronize graph state with a new peer on initial connect.
The switch no longer needs a pointer to the routing state machine as it
no longer needs to report when channels closed since the channel
closures will be detected by the ChannelRouter during graph pruning
when a new block comes in.
Finally, the funding manager now crafts the proper authenticated
announcement to send to the ChannelRouter once a new channel has bene
fully confirmed. As a place holder we have fake signatures everywhere
since we don’t properly store the funding keys and haven’t yet adapted
the Signer interface (or create a new one) that abstracts out the
process of signing a generic interface.
This commit fixes an unnoticed bug within btcwallet’s implementation of
the BlockChainIO interface, specifically the GetUtxo method. In order
to maintain compatibility with Bitcoin Core’s gettxout method, btcd
doesn’t return an error if the targeted output is actually spent.
We weren’t properly detecting this, but we do now by creating a new
error which is returned in the case of a nil error but a nil return
value.
This commit modifies the SingleFundingOpen message to include the
compact channel ID of the finalized transaction rather than a “fake”
SPV proof. This change is a stop-gap which allows us to implement
portions of BOLT07 without yet fully implementing all parts of BOLT[02,
03].
This commit overhauls the routing package significantly to simplify the
code, conform to the rest of the coding style within the package, and
observe the new authenticated gossiping scheme outlined in BOLT07.
As a major step towards a more realistic path finding algorithm, fees
are properly calculated and observed during path finding. If a path has
sufficient capacity _before_ fees are applied, but afterwards the
finalized route would exceed the capacity of a single link, the route
is marked as invalid.
Currently a naive weighting algorithm is used which only factors in the
time-lock delta at each hop, thereby optimizing for the lowest time
lock. Fee calculation also isn’t finalized since we aren’t yet using
milli-satoshi throughout the daemon. The final TODO item within the PR
is to properly perform a multi-path search and rank the results based
on a summation heuristic rather than just return the first (out of
many) route found.
On the server side, once nodes are initially connected to the daemon,
our routing table will be synced with the peer’s using a naive “just
send everything scheme” to hold us over until I spec out some a
efficient graph reconciliation protocol. Additionally, the routing
table is now pruned by the channel router itself once new blocks arrive
rather than depending on peers to tell us when a channel flaps or is
closed.
Finally, the validation of peer announcements aren’t yet fully
implemented as they’ll be implemented within the pending discovery
package that was blocking on the completion of this package. Most off
the routing message processing will be moved out of this package and
into the discovery package where full validation will be carried out.
This commit removes the older routing/discovery messages from the
unwire package, as we’ll be converging towards BOLT07 in the near-term.
In the mid to far term we’ll be revisiting integrating Flare into the
newer scheme in order to take advantage of its scaling characteristics.
This commit modifies the FetchChannelEdgesByID slightly to use a
read-only transaction rather than a write-only transaction. As a result
we’ll no longer extraneously consume a writer’s slot when we’re only
reading data from the database.
This commit modifies the HasChannelEdge function to _always_ return
true if we know of the channel edge, meaning that it was previously
added on announce.
This change fixes a minor bug present in the code which would result in
extraneous re-transmissions of updates received by the new routing
package.
This commit adds a utility method whcih utilizes the edge index bucket
and allows caller to look up the channel ID of a channel by its funding
outpoint. This can be used to populate RPC’s with additional
information and also to provide users with an additional query
interface to build channel explorers, etc.
Previously, the edge index bucket which maps a channelPoint ->
channelID wasn’t properly created one start up during the initial
creation of the database. This caused some extraneous failure as
queries would unnecessarily fail with bucket non-existence errors.
To fix this we now properly create the bucket on start up if the
database doesn’t exist, and also properly delete the bucket within the
Wipe() function.
This commit modifies the historical dispatch workflow slightly to also
obtain the full block in which the transaction was confirmed we we can
fully populate the full TxConfirmations struct which was recently added
as part of the confirmation subscription API.
With this change, confirmation triggers that a reached while the demon
is down, will now be deliver exactly as if the trigger was reached
while the daemon was up.
This commit slightly modifies the channel reservation workflow to
expose the new information conerning the exact confirmation location of
the channel provided by the ChainNotifier. The DispatchChan() method of
the ChannelReservation now also returns the blockHeight and txIndex
where the transaction was ultimately confirmed. This information will
be needed by the fundingManager so it can properly generate the
authenticated channel announcement proofs.
Within the inner loop of the utxoNursery when waiting for a new
sweepable transaction to be confirmed, we now use the new ChainNotifier
API for ConfirmationEvent’s which exposes additional details as to
exactly where in the chain the transaction was ultimately confirmed.
This commit updates the BtcdNotifier implementation of the
ChainNotifier by including the details of a transaction’s confirmation
within the ConfirmationEvent struct sent once a registered txid has
reached a sufficient number of confirmation.
This commit modifies the ChainNotifier interface, specifically the
ConfirmationEvent struct to now return additional details concerning
the exact location in the chain that the transaction was confirmed at.
This information will be very useful within the new routing package, as
within the network, channels are identified via their channel-ID which
is a compact encoding of: blockHeight | txIndex | outputIndex
This commit fixes a minor bug in the ForEachChannel method of the
ChannelGraph struct. Rather than ErrGraphNoEdgesFound being returned if
either of the edge related buckets hadn’t been created yet,
ErrGraphNodesNotFound was being returned.
To fix this bug, we now properly return ErrGraphNoEdgesFound.
Additionally a mental note to roasbeef has been left as the current
code currently assumes that eventually both directions of the channel
edge will be advertised. However, this may not necessarily be the case
in a live network, since a side chooses to preferentially advertise a
channel or not.
This commit fixes a bug within the btcwallet implementation of the
BlockChainIO interface. The exact nature of the bug was a rounding
error that would only manifest if the value of the UTXO was below 1
BTC.
The tests within this package currently test channels with mostly whole
values of BTC, as a result the bug went unnoticed until now.
The fix itself is trivial: convert to an int64 AFTER performing the
multiplication to convert to satoshis from Bitcoin.
This commit removes the previous test cases which excised the proper
validation of graph announcements on the network. As full generation of
the authenticated messages has not yet been implemented, these tests
aren’t currently applicable.
In a future commit, these tests will be replicated on the new discovery
package which will handle producing the channel proofs and also fully
validating them.
This commit modifies the Alias type to only hold the non-zero portion
of the alias as encoded on the wire. Previously the entire 32-bytes
would be read and stored, including the zeroes at the end used as
padding. Within the constructor, we now parse the alias properly,
discarding the trailing zeroes within the passed byte slice.
Additionally, the .String() method of Alias will now also only print
the non-zero prefix of the decoded alias.
This commit temporarily disables the signature validation for all
announcement related messages which should be authenticated by one or
many parties. This feature is being disabled as we don’t yet generate
valid signatures for our advertisements and the validation of the
messages should be placed in the layer 3 discovery service rather than
within within the message parsing layer.
This commit modifies the attributes of the LightningChannel struct to
publicly expose the funding keys used within the channel for the local
and remote party. Exposing these keys publicly will allow callers to
use the keys involved to generate authenticated channel advertisements
for the routing layer.
This commit adds to new functions to the ChannelGraph struct which
allow the callers to query for the existence or non-existence of a
vertex (node) or edge (channel) within the graph. In addition to
returning whether the edge exists, the functions will also return the
last time the state has been modified for the edge or vertex. This will
allow callers to ensure that only the most up to date state is
committed to disk.
This commit expands the data returned by the current GetCurrentHeight
to also return the current best block hash, expanding the method into
GetBestBlock. Additionally, the current best BlockHash is also now
displayed within the GetInfo RPC call.
This commit separates out the ChannelID into a new file, with
additional helper methods for conversion and formatting. With this
commit, the struct is now more general purpose and can be used in the
new routing package, database, and other related sub-systems.
