This commit adds a small cancellation check to the
invoice subscription integration test. Calls to
Fatalf were observed on travis after the test had
ended stemming from the subscriber's goroutine,
which could happen if the subscription is late.
It also extends the timeout on the test from 5 to
10 seconds.
There is a sleep after channels are opened to ensure the channel is
removed from the set of pending reservations. We can avoid this sleep
and get better guarantees of the channel being opened by deleting the
reservation just before updating channel state to active instead of
after.
This helps catch issues in the RPC tests faster by putting a timeout
on all SendPayment requests. Otherwise, if a payment stalled, the test
would run until the test suite timeout, 10 minutes. Also simplifies
some code with a helper function and using SendPaymentSync where
possible.
If an lnd node encounters a fatal process errors, we now log the error
asynchronously, instead of calling Fatalf on the test instance. This
is because calling Fatalf in a separate goroutine does not actually
end the test immediately as expected, but rather just kills the
goroutine. This ensures that we see server errors on all nodes before
the test process exits.
In this commit, we increase the initial amount sent in the multi-hop
error integration test. We must do this now as the Bandwidth() function
now takes into account the total fee paid within the commitment
transaction. This caused an earlier send to fail instead of the once
following send.
To fix this, we simply send less in the initial test case.
This commit removes the testChannelReestablishment integration test as
it is currently incomplete. In order to properly test this, we require
some infrastructure that allows us to kill the connection at will once
a message is sent across the wire.
In this commit BOLT№2 retranmission logic for the channel link have
been added. Now if channel link have been initialised with the
'SyncState' field than it will send the lnwire.ChannelReestablish
message and will be waiting for receiving the same message from remote
side. Exchange of this message allow both sides understand which
updates they should exchange with each other in order sync their
states.
This commit adds a test for an lnd instance experiecing a reorg,
making sure a channel that is in the channel graph (using the
describegraph rpc call) will no longer be after the funding tx
gets reorged out.
In this commit, we modify the assertNumOpenChannelsPending to poll
every 200ms rather than just a single attempt. The goal of this commit
is to reduce the number of flakes on travis caused by slow instances.
In this commit, we extend the testMultiHopPayments test case to add an
additional node to the multi-hop payment route: Dave.
Related to #391 as it uses the provided code fragment to reproduce the
bug. With this test in place, we’ll now be able to notice any
regressions in this area.
In this commit we modify all the test that involve sending payments to
use the payreq returned rather than manually populating the
payhash+dest fields in the SendRequest proto argument to SendPayment.
This is required as if we don’t use the payreq returned, then the
receiving node will reject the payment as it’ll use the global final
CLTV delta value, rather than the value (within the pay req) that the
receiver is expecting.
In order to maintain the original essence of the test, we need to clear
the state of missionControl with each attempt, essentially advancing
time between each payment attempt.
This commit fixes a bug related to swallowing an error that should go
to the switch in the case of an insufficient balance error when
attempting to add a new HTLC to the channel state machine. In this
case, an error would never be returned back to the client/switch, and
the internal processing within the channelLink would loop forever,
attempting to add an HTLC that can’t be added due to insufficient
balance to state machine itself.
We fix this issue by only treating the lnwallet.ErrMaxHTLCNumber as the
only error that prompts adding an HTLC to the overflow queue rather
than sending the error directly back to the switch.
This commit alters the existing retribution
post breach conf test case with the intention
of testing the correct response in event that
the remote party broadcasts a prior state
while HTLCs have been extended. This serves
as a preliminary integration for an expansion
of the breach arbiter integration tests.
The primary change involves using the new
htlchodl mode for debugging, which causes the
remote peer to ignore any intent to settle
incoming HTLCs. The result is that any
payments sent to the remote party are held in
limbo, allowing us to test for these
conditions more accurately.
Currently the test case only tests that the
justice transaction is mined. After we have
fully integrated the breach arbiter to sweep
2nd layer HTLCs, this test will be altered
to check for spends from the appropriate
inputs.
This commit adds a breached contract retribution storage layer using
boltdb to the breach arbiter. The breach arbiter now stores retribution
state on disk between detecting a contract breach, broadcasting a
justice transaction that sweeps the channel, and finally witnessing the
justice transaction confirm on the blockchain. It is critical that such
state is persisted on disk, so that if our node restarts at any point
during the retribution procedure, we can recover and continue from the
persisted state.
This commit modifies the HTLC integration tests to be mindful of the
max payment size. Rather than sending the payment in one large batch,
we instead now send it in chunks of the max payment size.
This commit prevents the case where btcd stops before lnd is fully
started, thus making lnd_test hang on trying to stop lnd using
`StopDaemon`. The underlying issue is that while lnd is trying to
start the server and subscribe to block notifications from btcd,
btcd stops, and lnd continues to attempt to reconnect before it
ever starts the interrupt handler. This reversal avoids that issue
by making sure lnd is stopped before btcd.
In the "multiple channel creation" test, in some cases the
responder (Bob) was not yet considering the first channel
to be opened (activeReservation still not deleted in
fundingManager) when Alice tried to open the second channel.
This would cause the test to fail. This commit adds a small
sleep before the creation of the second channel, to give
Bob some time to finish the opening process.
This commit updates the integration tests to reflect the reality after
removing code that would always attempt to increment the current update
timestamp by one for each channel announcement. Without connecting
directly to carol, it isn’t guaranteed that Alice will receive that
announcement as Bob would have already processed one for Carol when
their channel was created.
Make the fundingmanager send an updated node announcement
each time it opens a new channel. This is to make sure
our node announcement is propagated in the network, since
peers will ignore our node announcements if we haven't
opened any channels yet.
Within the network, it's important that when an HTLC forwarding failure
occurs, the recipient is notified in a timely manner in order to ensure
that errors are graceful and not unknown. For that reason with
accordance to BOLT №4 onion failure obfuscation have been added.
This commit fixes a minor bug in the goroutine that’s launched to check
the sync status of a particular node. Previously, the goroutine could
end up infinitely stuck on a send as once the chain has been detected
as synced, it didn't exit.
We fix this now by ensure that the goroutine always terminates after
the initial notification to the caller. Additionally, we not ensure
that both the internal and exterior goroutine are both reading off of
the peer’s quit channel.
This commit modifies the travis build script, and our local test script
to ensure that the race condition builds are conducted in a parallel
build. After this commit two travis builds will be kicked off for each
push/commit: one that runs the race condition tests in isolation, and
another that runs the integration tests then the coverage tests.
In order to do the above cleanly, the integration tests are now guarded
behind a build flag. In order to run the integration tests, one now
needs to specify the `-tags rpctest` flag when running the `go test`
command.
In this commit additional test have been added which tests the ability
of Alice and Bob asynchroniously exchange the payment between each
other. This scenario will be higly frequent in the payment between
payment providers.
In order to not close the payment stream on payment error the additional
field have been added in payment response. Now error from stream Recv()
function means that something has happend inside the client and we unable
to process any payment farther, and error inside the payment response
means, that something wrong has happend with payment itself.
This commit replaces the hard-coded 5000 satoshi fees with calls to the
FeeEstimator interface. This should provide a way to cleanly plug in
additional fee calculation algorithms in the future. This change
affected quite a few tests. When possible, the tests were changed to
assert amounts sent rather than balances so that fees wouldn't need to
be taken into account. There were several tests for which this wasn't
possible, so calls to the static fee calculator were made.
This commit changes the SingleHop and MultiHop integration tests to
assert amounts sent rather than balances. Because fees can be odd
amounts, this change makes it such that fee amounts don't need to be
explicitly taken into account in the tests.
This commit changes t.Fatal to t.Fatalf in TestCheckDustLimit so as to
provide more information. This commit also makes some column width
adjustments and minor spelling/formatting changes.
This commit allows users to sign messages with their node's private key
with the SignMessage interface. The signatures are zbase32 encoded for
human readability/paste-ability. Others users can verify that a message
was signed by another node in their channel database with the
VerifyMessage interface.
This commit fixes a prior bug wherein if a user connected to a peer
using the —perm command, then once the peer was disconnected, we
wouldn’t automatically connect to them.
Issue: 139
This commit contains test case "disconnecting target peer" (second test case) which takes two
connected peers, then checks via assert method one connection exists,
then disconnects this remote peer by passing pubKey parameter (just some string) into RPC-call method. Then checks 0
connection exists, and then connects disconnected peer for passing
further tests, and then checks one connection exists.
The recent multi-chain features resulted in a new directory structure
that wasn’t properly observed by the integration tests. This commit
fixes a prior bug that wouldn’t allow the test to copy the prior
revoked channels to the current state.
This commit is tied to the prior commit and it patches up a lingering
race condition and deadlock that can arise due to now properly waiting
for all goroutine to exit before concluding the shutdown process.
This commit modifies the testNodeAnnouncment to no longer open a
channel for the duration of the test. As the test is only exercising
the proper behavior of announcement propagation and doesn’t require a
channel to be open for the duration. Also we now properly shutdown the
created “dave” node, as it’s no longer needed after the tests
concludes.
Use addresses and ports from NodeAnnouncement messages for reconnection
attempts. For those nodes that don't explicitly report IP addresses, use
the IP address from previous connections connection request along with
the default peer port number.
Minor change to server.go to add ExternalIPs to
channeldb.LightningNode. Also, added a test that utilizes this
functionality and exercises multiple addresses in NodeAnnouncement.
This commit removes a number of sleeps from the set of current
integration tests by replacing them with a synchronous (w/ a timeout)
block until one or many channels are detected as being open within the
network.
As a result, the tests are now more robust, many flakes have been
eliminated, and finally this shaves a few second off of the integration
testing runs.
This commit modifies the two newly added network announcement hook stop
be at the lightningNode level rather than on the level of the entire
test framework. With this, callers are now able to better utilize the
newly added RPC’s since they can target particular peers and wait for
network messages to be processed rather then depending on a single node
(Alice) for information about the announcements propagated within the
network.
This commit adds the FundingManagerPersistence test to ensure that the
funding process completes as expected when nodes shutdown after the the
funding transaction has been broadcast. Note that the final parts of
several wallet tests have been removed, as functionality has been moved
to the Funding Manager and should now be tested there.
github.com/lightningnetwork/lnd master ✗
0m ◒
▶ golint
htlcswitch.go:292:4: should replace numUpdates += 1 with numUpdates++
htlcswitch.go:554:6: var onionId should be onionID
htlcswitch.go:629:7: var onionId should be onionID
lnd_test.go:133:1: context.Context should be the first parameter of a
function
lnd_test.go:177:1: context.Context should be the first parameter of a
function
networktest.go:84:2: struct field nodeId should be nodeID
peer.go:1704:16: should omit 2nd value from range; this loop is
equivalent to `for invoice := range ...`
rpcserver.go:57:6: func newRpcServer should be newRPCServer
github.com/lightningnetwork/lnd master ✗
9m ⚑ ◒ ⍉
▶ go vet
features.go:12: github.com/lightningnetwork/lnd/lnwire.Feature
composite literal uses unkeyed fields
fundingmanager.go:380: no formatting directive in Errorf call
exit status 1
In this commit we modify the testSingleHopInvoice test to ensure that
we obtain the proper preimage from the SendPayment RPC upon successful
payment completion.
This commit adds a new assertion in the channel force closure test in
order to exercise the fix for a bug related to channel force closure
implemented in a prior commit. With this new assertion, we ensure that
bob is aware of his on-chain balance after a force channel closure
initiated by alice.
This commit elminates a sleep in the testHtlcErrorPropagation test by
instead polling for the existence of our target in a tight loop. This
is a small patch over until we get a “topology client” within the
ChannelRouter. This method is robust and can be applied in future tests
until we get the notification client into the ChannelRouter.
This commit slightly optimizes the process of broadcasting a message to
a list of peers, and also sending a set of messages to a target peer.
When broadcasting a message to a set of target peers, we now launch a
goroutine for each send as to not block the ChannelRouter on an
individual send. When sending a set of messages to a target peer, we
now give up the mutex as soon as we’ve access the map, rather than
holding onto it until the sending is complete.
This commit adds a new restriction around funding channels at the
daemon level: lnd nodes will not allow either the initiation or the
acceptance of a channel before the node is fully synced to the best
known chain.
This fixes a class of bug that arises when a new node joins the network
and either attempts to open a channel or has a channel extended to them
before the node is fully synced to the network.
