In this commit, we add a new build tag protected sub-config for legacy
protocol features. The goal of this addition is to be able to default to
new feature within lnd, but expose hooks at the config level to allow
integration tests to force the old behavior to ensure that we're able to
support both the old+new versions.
htlcs
config: Adding RejectHTLC field in config struct
This commit adds a RejectHTLC field in the config struct in config.go.
This allows the user to run lnd as a node that does not accept onward
HTLCs.
htlcswitch/switch: Adding a field RejectHTLC to the switch config
This commit adds a field RejectHTLC to the switch config. When the
switch receives an HTLC it will check this flag and if the HTLC is not
from the source hop, the HTLC will be rejected.
htlcswitch/switch: adding check for RejectHTLC flag and incomingChanID
This commit adds a check when receiving UpdateAddHTLC. The check looks
for the RejectHTLC flag set and whether the HTLC is from the sourceHop
(the local switch). If the HTLC is not from the sourceHop, then we
reject the HTLC and return a FailChannelDisabled error.
server: adding RejectHTLC field to initialization of switch
lnd_test: adding test for RejectHTLC
This commit adds a test which tests that a node with the --rejecthtlc
flag will reject any onward HTLCs but still can receive direct HTLCs and
can send HTLCs.
Debug invoices are rarely used nowadays, but keep asking for maintenance
every time refactoring in primarily the invoice registry occurs. We have
passed the cost/benefit tipping point, so therefore the debug invoice
concept is removed in this commit.
Previously the debughtlc flag also controlled whether hodl masks were
active. It is safe to remove that additional condition because the hodl
masks are still guarded by the dev build tag.
This commit adds the ignore-historical-filters CLI option, initially
defaulting to false. Users may use this option to prevent lnd from doing
historical gossip dumps to peers that set their `gossip_timestamp_range`
in the past. Enabling this option will result in lower bandwidth and
memory consumption. Down the road the plan is to make this default to
true.
With the introduction of the WatchtowerClient RPC subserver, the lnd
configuration flag to specify private watchtowers for the client is no
longer needed and can lead to confusion upon users. Therefore, we remove
the flag completely, and only rely on the watchtower client being active
through a new --wtclient.active flag.
This commit makes the outgoing link pipeline the settle to the
switch as soon as it receives it. Previously, it would wait for a
revocation before sending it, which caused increased latency on
payments as well as possibly never settling on the incoming link.
A duplicate settle is still sent to the switch, but it is handled
gracefully. A new AckEventTicker was added to the switch which
acknowledges any pending settle / fail entries in an outgoing
link's fwd pkgs in batch. This was needed in order to reduce the
number of db txn's which would have been incurred by acking whenever
we receive a duplicate settle without batching.
This commit makes the funding manager access the MaxPendingChannels and
RejectPush values from the fundingConfig instead of the global config
struct.
Done to avoid sharing state between tests.
In this commit we add exponential back off to the `initialPeerBootstrap`
method. Before this change, if the DNS seed was down, we would hammer it
in an attempt to get our initial set of peers. This makes this section a
bit less aggressive, but saves log spam and also will hit the DNS
servers less frequently.
This commit moves the newSweepPkScript function
previously in the nursery to be a helper function
within the server. Additionally, the function now
returns a closure that satisfies the configuration
interfaces of several other subsystems.
As a result, the configuration sites contain much
less boilerplate, as it's now encapsulated in
the newSweepPkScriptGen helper.
This commit exposes the three main parameters that influence mission
control and path finding to the user as command line or config file
flags. It allows for fine-tuning for optimal results.
This commit makes the router use the ControlTower to drive the payment
life cycle state machine, to keep track of active payments across
restarts. This lets the router resume payments on startup, such that
their final results can be handled and stored when ready.
In this commit, we introduce support for arbitrary client fee
preferences when accepting input sweep requests. This is possible with
the addition of fee rate buckets. Fee rate buckets are buckets that
contain inputs with similar fee rates within a specific range, e.g.,
1-10 sat/vbyte, 11-20 sat/vbyte, etc. Having these buckets allows us to
batch and sweep inputs from different clients with similar fee rates
within a single transaction, allowing us to save on chain fees.
With this addition, we can now get rid of the UtxoSweeper's default fee
preference. As of this commit, any clients using the it to sweep inputs
specify the same fee preference to not change their behavior. Each of
these can be fine-tuned later on given their use cases.
This commit moves the responsibility of generating a unique payment ID
from the switch to the router. This will make it easier for the router
to keep track of which HTLCs were successfully forwarded onto the
network, as it can query the switch for existing HTLCs as long as the
paymentIDs are kept.
The router is expected to maintain a map from paymentHash->paymentID,
such that they can be replayed on restart. This also lets the router
check the status of a sent payment after a restart, by querying the
switch for the paymentID in question.
This commit is the final step in making the link unaware of invoices. It
now purely offers the htlc to the invoice registry and follows
instructions from the invoice registry about how and when to respond to
the htlc.
The change also fixes a bug where upon restart, hodl htlcs were
subjected to the invoice minimum cltv delta requirement again. If the
block height has increased in the mean while, the htlc would be canceled
back.
Furthermore the invoice registry interaction is aligned between link and
contract resolvers.
This commit isolates preimages of forwarded htlcs from invoice
preimages. The reason to do this is to prevent the incoming contest
resolver from settling exit hop htlcs for which the invoice isn't marked
as settled.
Since ActiveSync GossipSyncers no longer synchronize our state with the
remote peers, none of the logic surrounding the round-robin is required
within the SyncManager.
This commit serves as another stop-gap for light clients since they are
unable to obtain the capacity and channel point of graph edges. Since
they're aware of these things for their own channels, they can populate
the information within the graph themselves once each channel has been
successfully added to the graph.
The check prevented the creation of port forwardings which were assumed
to be present already. After this change the port forwardings which
might have been removed from the NAT device can be re-created.
This commits exposes the various parameters around going to chain and
accepting htlcs in a clear way.
In addition to this, it reverts those parameters to what they were
before the merge of commit d1076271456bdab1625ea6b52b93ca3e1bd9aed9.
This commit adds optional jitter to our initial reconnection to our
persistent peers. Currently we will attempt reconnections to all peers
simultaneously, which results in large amount of contention as the
number of channels a node has grows.
We resolve this by adding a randomized delay between 0 and 30 seconds
for all persistent peers. This spreads out the load and contention to
resources such as the database, read/write pools, and memory
allocations. On my node, this allows to start up with about 80% of the
memory burst compared to the all-at-once approach.
This also has a second-order effect in better distributing messages sent
at constant intervals, such as pings. This reduces the concurrent jobs
submitted to the read and write pools at any given time, resulting in
better reuse of read/write buffers and fewer bursty allocation and
garbage collection cycles.
In this commit, we convert the server's Start/Stop methods to use the
sync.Once. We do this in order to fix concurrency issues that would
allow certain queries to be sent to the server before it has actually
fully start up. Before this commit, we would set started to 1 at the
very top of the method, allowing certain queries to pass before the rest
of the daemon was had started up.
In order to fix this issue, we've converted the server to using a
sync.Once, and two new atomic variables for clients to query to see if
the server has fully started up, or is in the process of stopping.
In this commit, we modify the server to serve the role as the agent
which will carry out the SCB restoration protocol if the Init/Unlock
methods include a set of channels to be recovered.
This commit increase the expiry grace delta to a value above the
broadcast delta. This prevents htlcs from being accepted that would
immediately trigger a channel force close.
A correct delta is generated in server.go where there is access to
the broadcast delta and passed via the peer to the links.
Co-authored-by: Jim Posen <jim.posen@gmail.com>
Previously it was difficult to use the invoice registry in unit tests,
because it used zpay32 to decode the invoice. For that to succeed, a
valid signature is required on the payment request.
This commit injects the decode dependency on a different level so that
it is easier to mock.
Previously a function pointer was passed to chain arbitrator to avoid a
circular dependency. Now that the routetypes package exists, we can pass
the full invoice registry to chain arbitrator.
This is a preparation to be able to use other invoice registry methods
in contract resolvers.
This commit modified the condition to whether drop an existing
connection to a peer when a new connection to this peer is
established.
The previous algorithm used public keys comparison for this decision
which determines that between every two nodes only one of them will
ever drop the connection in such cases.
The problematic case is when a node disconnects and reconnects in a
short interval which is the case of mobile devices.
In such case it takes as much as the "timeout" configured value for
the remote node to detect the "disconnection" (and try to reconnect
if this connection is persistent). In the case this node is also the
one that has the "smaller" public key the reconnect attempts of the
other node will be rejected causing it impossible to fast reconnect.
The solution is to only drop the connection if if we already have a
connected peer that is of the opposite direction from the this new
connection. By doing so the "initiator" will be enabled to replace
the connection and recconnect immediately.
In this commit, we also allow channel updates for our channels to be
sent reliably to our channel counterparty. This is especially crucial
for private channels, since they're not announced, in order to ensure
each party can receive funds from the other side.
Exposes the three parameters that dictate
the behavior of the channel status manager:
* --chan-enable-timeout
* --chan-disable-timeout
* --chan-status-sample-interval
