Commit Graph

211 Commits

Author SHA1 Message Date
Johan T. Halseth
3f76bc0629
routing+server: define PaymentSessionSource 2019-05-27 20:18:59 +02:00
Johan T. Halseth
f4306b1178
routing/payment_session+router: make PaymentSession interface 2019-05-27 20:18:58 +02:00
Johan T. Halseth
adc4640f4f
routing: export MissionControl 2019-05-27 20:18:58 +02:00
Johan T. Halseth
3323800e02
routing/router: resume payment state machine at startup
On startup the router will fetch the in-flight payments from the control
tower, and resume their execution.
2019-05-27 20:18:58 +02:00
Johan T. Halseth
de1bf8a518
routing/router: persist payment state machine
This commit makes the router use the ControlTower to drive the payment
life cycle state machine, to keep track of active payments across
restarts.  This lets the router resume payments on startup, such that
their final results can be handled and stored when ready.
2019-05-27 20:18:58 +02:00
Johan T. Halseth
83bfaa4fb4
routing: extract payment flow into method on paymentLifecycle
This encapsulates all state needed to resume a payment from any point of
the payment flow, and that must be shared between the different stages
of the execution. This is done to prepare for breaking the send loop
into smaller parts, and being able to resume the payment from any point
from persistent state.
2019-05-27 20:18:57 +02:00
Johan T. Halseth
ae7bf2cb7b
routing/router: move sending and receiving payment result into loop 2019-05-27 20:18:57 +02:00
Wilmer Paulino
6e0084fec9
Merge pull request #3075 from cfromknecht/crtr-nil-path-curves
routing/router: nil path pubkeys before spewing
2019-05-23 20:01:54 -07:00
Johan T. Halseth
cd02c22977
htlcswitch+router: move deobfuscator creation to GetPaymentResult call
In this commit we move handing the deobfuscator from the router to the
switch from when the payment is initiated, to when the result is
queried.

We do this because only the router can recreate the deobfuscator after a
restart, and we are preparing for being able to handle results across
restarts.

Since the deobfuscator cannot be nil anymore, we can also get rid of
that special case.
2019-05-16 23:56:12 +02:00
Johan T. Halseth
5a8b892bb6
routing/router: extract sessionKey generation
We extract the session key such that we can later store it across
restarts.
2019-05-16 23:56:12 +02:00
Johan T. Halseth
ec087a9f73
htlcswitch+router: define PaymentResult, GetPaymentResult
This lets us distinguish an critical error from a actual payment result
(success or failure). This is important since we know that we can only
attempt another payment when a final result from the previous payment
attempt is received.
2019-05-16 23:56:12 +02:00
Johan T. Halseth
ed81cec0fa
routing/router: remove sendToSwitch method 2019-05-16 23:56:11 +02:00
Johan T. Halseth
c9e8ff6a34
switch+router+server: move NextPaymentID to router
This commit moves the responsibility of generating a unique payment ID
from the switch to the router. This will make it easier for the router
to keep track of which HTLCs were successfully forwarded onto the
network, as it can query the switch for existing HTLCs as long as the
paymentIDs are kept.

The router is expected to maintain a map from paymentHash->paymentID,
such that they can be replayed on restart. This also lets the router
check the status of a sent payment after a restart, by querying the
switch for the paymentID in question.
2019-05-16 23:56:06 +02:00
Johan T. Halseth
f1cb54f943
routing/router: define PaymentAttemptDispatcher interface
The switch satisfies this interface, and makes it easy to mock the send
method from the router.
2019-05-16 23:53:08 +02:00
Joost Jager
ba3fa94268
lnrpc+routing: Only accept a single route for SendToRoute 2019-05-15 11:54:46 +02:00
Conner Fromknecht
4d26e90ef3
routing/router: nil path pubkeys before spewing 2019-05-14 20:32:58 -07:00
Olaoluwa Osuntokun
f8c824fb1d
Merge pull request #3054 from joostjager/remove-k-shortest
lnrpc+routing: remove k shortest path finding
2019-05-10 15:51:01 -07:00
Johan T. Halseth
10070ecab7
lnwallet: make BlockChainIO.GetUTXO take cancel chan
Use quit channels as cancel chan for call to GetUTXO.
2019-05-09 14:44:47 +02:00
Joost Jager
7a5bd29a69
lnrpc+routing: remove k shortest path finding 2019-05-07 19:54:06 +02:00
Conner Fromknecht
3f59e31248
routing/router: break rescans on router quit
This commit reevaluates the router's quit channel between each block
during the initial call to syncGraphWithChain, which, in the worst case,
may have to scan several thousand blocks on startup if the node has not
been active for some time. Without this, attempting to stop the daemon
will not exit until the rescan has completed, which for certain backends
could be several hours.
2019-05-06 15:04:40 -07:00
Olaoluwa Osuntokun
bab957382f
router: convert Route.ToHopPayloads() to Route.ToSphinxPath()
In this commit, we update the process that we use to generate a sphinx
packet to send our onion routed HTLC. Due to recent changes in the
`sphinx` package we use, we now need to use a new PaymentPath struct. As
a result, it no longer makes sense to split up the nodes in a route and
their per hop paylods as they're now in the same struct. All tests have
been updated accordingly.
2019-04-30 20:13:32 -07:00
Johan T. Halseth
ee257fd0eb
multi: move Route to sub-pkg routing/route 2019-04-29 14:52:33 +02:00
Wilmer Paulino
0b0a9f4172
channeldb+routing: refactor DeleteChannelEdge to use ChannelID
In this commit, we refactor DeleteChannelEdge to use ChannelIDs rather
than ChannelPoints. We do this as the only use of DeleteChannelEdge is
when we are pruning zombie channels from our graph. When running under a
light client, we are unable to obtain the ChannelPoint of each edge due
to the expensive operations required to do so. As a stop-gap, we'll
resort towards using an edge's ChannelID instead, which is already
gossiped between nodes.
2019-04-18 21:57:41 -07:00
Wilmer Paulino
f2637d63ba
routing: prevent fetching blocks for graph edges with AssumeChannelValid
This serves as a stop-gap for light clients as blocks need to be
downloaded from the P2P network, and even with caches, would be too
costly for them to verify. Doing this has two side effects however:
we'll no longer know of the channel capacity and outpoint, which are
essential for some of lnd's responsibilities.
2019-04-18 21:57:37 -07:00
Wilmer Paulino
fd1aa478a9
routing: disable FilteredChainView when AssumeChannelValid is active
In this commit, we disable attempting to determine when a channel has
been closed out on-chain whenever AssumeChannelValid is active. Since
the flag indicates that performing this operation is expensive, we do
this as a temporary optimization until we can include proofs of channels
being closed in the gossip protocol.

With this change, the only way for channels being removed from the graph
will be once they're considered zombies: which can happen when both
edges of a channel have their disabled bits set or when both edges
haven't had an update within the past two weeks.
2019-04-18 21:57:37 -07:00
Wilmer Paulino
7e7b8a1940
routing: prune graph nodes after pruning zombie channels
We do this to ensure we don't leave any stray nodes in our graph that
were part of the zombie channels that we've pruned.
2019-04-18 21:57:36 -07:00
Wilmer Paulino
7eb720e535
routing: mark policy as stale if edge remains double disabled
To ensure we don't mark an edge as live again just because an update
with a fresh timestamp was received, we'll ensure that we reject any
new updates for zombie channels if they remain disabled when running
with AssumeChannelValid.
2019-04-18 21:57:35 -07:00
Wilmer Paulino
f23c3b488e
routing: prune channels with disabled bit set on both edges
In this commit, we add an additional heuristic when running with
AssumeChannelValid. Since AssumeChannelValid being present assumes that
we're not able to quickly determine whether channels are valid, we also
assume that any channels with the disabled bit set on both sides are
considered zombie. This should be relatively safe to do, since the
disabled bits are usually set when the channel is closed on-chain. In
the case that they aren't, we'll have to wait until both edges haven't
had a new update within two weeks to prune them.
2019-04-18 21:57:34 -07:00
Wilmer Paulino
78bdcbb115
routing: prune channels only if both edges are present
We do this to ensure we don't prune too aggressively, as it's possible
that we've only received the channel announcement for a channel, but not
its accompanying channel updates.
2019-04-18 21:57:31 -07:00
Olaoluwa Osuntokun
373927fb3e
Merge pull request #2950 from joostjager/remove-route-cache
routing: remove route cache
2019-04-17 19:34:19 -07:00
Johan T. Halseth
2b9efcbaeb
routing/router: define ErrRouterShuttingDown 2019-04-15 16:55:10 +02:00
Joost Jager
3b94627c12
routing: remove route cache
This commit removes the QueryRoutes route cache. It is causing wrong
routes to be returned because not all of the request parameters are
stored.

The cache allowed high frequency QueryRoutes calls to the same
destination and with the same amount to be returned fast. This behaviour
can also be achieved by caching the request on the client side. In case
a route is invalidated because of for example a channel update,
the subsequent SendToRoute call will fail. This is a trigger to call
QueryRoutes again for a fresh route.
2019-04-13 08:10:32 +02:00
Wilmer Paulino
23796d3247
routing+discovery: extend ChannelGraphSource with zombie index methods 2019-03-27 13:07:30 -07:00
Wilmer Paulino
174645fcba
routing+server: expose DefaultChannelPruneExpiry 2019-03-27 13:07:13 -07:00
Wilmer Paulino
c82d73a826
channeldb+routing: extend edge lookup methods with zombie index check
In this commit, we extend the graph's FetchChannelEdgesByID and
HasChannelEdge methods to also check the zombie index whenever the edge
to be looked up doesn't exist within the edge index. We do this to
signal to callers that the edge is known, but only as a zombie, and the
only information that we have about the edge are the node public keys of
the two parties involved in the edge.

In the event that an edge does exist within the zombie index, we make
an additional check on edge policies to ensure they are not within the
router's pruning window, indicating that it is a fresh update.
2019-03-27 13:06:57 -07:00
Joost Jager
06cd64cbbc
routing: add cltv limit to payment session 2019-03-19 10:36:51 +01:00
Joost Jager
2be1051fb6
zpay32: move HopHint and DefaultFinalCLTVDelta 2019-03-15 10:08:32 +01:00
Joost Jager
6cc82b4a34
routing: add todo describing route cache bug 2019-03-06 15:31:09 +01:00
Joost Jager
c62c9d64da
routing: add source parameter to query routes
This commit allows execution of QueryRoutes from any source node.
Previously this was restricted to only the self node.
2019-03-06 15:31:03 +01:00
Joost Jager
7719bc432f
routing: take Vertex types as path finding source and target nodes
Currently public keys are represented either as a 33-byte array (Vertex) or as a
btcec.PublicKey struct. The latter isn't useable as index into maps and
cannot be used easily in compares. Therefore the 33-byte array
representation is used predominantly throughout the code base.

This commit converts the argument types of source and target nodes for
path finding to Vertex. Path finding executes no crypto operations and
using Vertex simplifies the code.

Additionally, it prepares for the path finding source parameter to be
exposed over rpc in a follow up commit without requiring conversion back
and forth between Vertex and btcec.PublicKey.
2019-03-06 15:31:00 +01:00
Joost Jager
b09adc3219
lnrpc+routing: add edges and nodes restrictions to query routes
This commit allows the execution of QueryRoutes to be controlled using
lists of black-listed edges and nodes. Any path returned will not pass
through the edges and/or nodes on the list.
2019-03-06 15:30:57 +01:00
Joost Jager
b2b28b49b1
routing: export RestrictParams and EdgeLocator 2019-03-06 15:30:52 +01:00
Joost Jager
4937304732
routing: remove redundant fee limit check in newRoute
This check was a left over from when the fee limit wasn't checked yet in
the path finding algorithm.
2019-03-06 15:30:49 +01:00
Johan T. Halseth
cee18892b5
Merge pull request #2565 from joostjager/sendpayment-refactor
routing: sendPayment broken down into multiple functions
2019-03-06 10:20:20 +01:00
Johan T. Halseth
23ce82f4e3
routing/router: don't apply channel policy updates for unknown channels 2019-02-14 14:21:18 +01:00
Johan T. Halseth
1259bacd49
routing: remove unused code, nodeIndex and chanIndex 2019-02-13 12:23:45 +01:00
Joost Jager
f8721ffbca
routing: sendPayment broken down into multiple functions 2019-02-11 08:42:41 +01:00
Joost Jager
7c30a8c493
routing: add outgoing channel restriction 2019-02-08 23:05:56 +01:00
Joost Jager
9e012ecc93
multi: move Input interface and related code
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
2019-01-31 13:25:33 +01:00
orbitalturtle
08750f180b multi: deprecate IncorrectHtlcAmount onion error
In this commit, we deprecate the `IncorrectHtlcAmount` onion error.
We'll still decode this error to use when retrying paths, but we'll no
longer send this ourselves. The `UnknownPaymentHash` error has been
amended to also include the value of the payment as well. This allows us
to worry about one less error.
2019-01-29 18:21:13 -08:00