This commit modifies paymentLifecycle so that it not only feeds
failures into mission control, but successes as well.
This allows for more accurate probability estimates. Previously,
the success probability for a successful pair and a pair with
no history was equal. There was no force that pushed towards
previously successful routes.
In this commit, we extend the path finding to be able to recognize when
a node needs the new TLV format, or the legacy format based on the
feature bits they expose. We also extend the `LightningPayment` struct
to allow the caller to specify an arbitrary set of TLV records which can
be used for a number of use-cases including various variants of
spontaneous payments.
Previously mission control tracked failures on a per node, per channel basis.
This commit changes this to tracking on the level of directed node pairs. The goal
of moving to this coarser-grained level is to reduce the number of required
payment attempts without compromising payment reliability.
This commit adds the pubkeyIndices map to the distanceHeap to avoid
duplicate entries on the heap. This happened in the earlier iteration
of the findPath algorithm and would cause the driving loop to
evaluate already evaluated entries when there was no need.
This commit modifies the nodeWithDist struct to use a route.Vertex
instead of a *channeldb.LightningNode. This change, coupled with
the new ForEachNodeChannel function, allows the findPath Djikstra's
algorithm to cut down on database lookups since we no longer need
to call the FetchOtherNode function.
This commit exposes the three main parameters that influence mission
control and path finding to the user as command line or config file
flags. It allows for fine-tuning for optimal results.
Previously every payment had its own local mission control state which
was in effect only for that payment. In this commit most of the local
state is removed and payments all tap into the global mission control
probability estimator.
Furthermore the decay time of pruned edges and nodes is extended, so
that observations about the network can better benefit future payment
processes.
Last, the probability function is transformed from a binary output to a
gradual curve, allowing for a better trade off between candidate routes.
This PR replaces the previously used edge and node ignore lists in path
finding by a probability based system. It modifies path finding so that
it not only compares routes on fee and time lock, but also takes route
success probability into account.
Allowing routes to be compared based on success probability is achieved
by introducing a 'virtual' cost of a payment attempt and using that to
translate probability into another cost factor.
In this commit, we make our findPath function use an edge's MaxHTLC as
its available bandwidth instead of its Capacity. We do this as it's
possible for the capacity of an edge to not exist when operating as a
light client. For channels that do not support the MaxHTLC optional
field, we'll fall back to using the edge's Capacity.
Currently public keys are represented either as a 33-byte array (Vertex) or as a
btcec.PublicKey struct. The latter isn't useable as index into maps and
cannot be used easily in compares. Therefore the 33-byte array
representation is used predominantly throughout the code base.
This commit converts the argument types of source and target nodes for
path finding to Vertex. Path finding executes no crypto operations and
using Vertex simplifies the code.
Additionally, it prepares for the path finding source parameter to be
exposed over rpc in a follow up commit without requiring conversion back
and forth between Vertex and btcec.PublicKey.
This commit allows the execution of QueryRoutes to be controlled using
lists of black-listed edges and nodes. Any path returned will not pass
through the edges and/or nodes on the list.
In this commit, we update the path finding logic to
ignore a channel if the HTLC value (including the fees
at the point) exceeds the max HTLC value (if set) of the
link.
This commit is a step to split the lnwallet package. It puts the Input
interface and implementations in a separate package along with all their
dependencies from lnwallet.
In this commit:
* we partition lnwire.ChanUpdateFlag into two (ChanUpdateChanFlags and
ChanUpdateMsgFlags), from a uint16 to a pair of uint8's
* we rename the ChannelUpdate.Flags to ChannelFlags and add an
additional MessageFlags field, which will be used to indicate the
presence of the optional field HtlcMaximumMsat within the ChannelUpdate.
* we partition ChannelEdgePolicy.Flags into message and channel flags.
This change corresponds to the partitioning of the ChannelUpdate's Flags
field into MessageFlags and ChannelFlags.
Co-authored-by: Johan T. Halseth <johanth@gmail.com>
In this commit we introduce pruning of channel edges instead of channels.
Channel failures apply to a single direction and it is unnecessarily
restricting to prune both directions.
Hop maps were used in a test to verify the population of the hop map
itself and further only in a single function (getFailedChannelID).
Rewrote that function and removed the hop maps completely.
To decouple our own path finding from the graph state, we don't consider
the disable bit when attempting to use local channels. Instead the
bandwidth hints will be zero for local inactive channels.
We alos modify the unit test to check that the disable flag is ignored
for local edges.
In this commit the dependency of unmarshallRoute on edge policies being
available is removed. Edge policies may be unknown and reported as nil.
SendToRoute does not need the policies, but it does need pubkeys of the
route hops. In this commit, unmarshallRoute is modified so that it
takes the pubkeys from edgeInfo instead of channelEdgePolicy.
In addition to this, the route structure is simplified. No more connection
to the database at that point. Fees are determined based on incoming and
outgoing amounts.
In this commit, a new weight function is introduced. This will create a
meaningful effect of time lock on route selection. Also, removes the
squaring of the fee term. This led to suboptimal routes.
Unit test added that covers the weight function and asserts that the
lowest fee route is indeed returned.
This commit fixes the logic inside the newRoute function to
address the following problems:
- Fee calculation for a hop does not include the fee that needs
to be paid to the next hop.
- The incoming channel capacity "sanity" check does not include
the fee to be paid to the current hop.
In this commit, we fix an existing bug in the newRoute method. Before
this commit we would use the time lock delta of the current hop to
compute the outgoing time lock for the current hop. This is incorrect as
the time lock delta of the _outgoing_ hop should be used, as this is
what we're paying for "transit" on. This is a bug left over from when we
switched the meaning of the CLTV delta on the ChannelUpdate message
sometime last year.
The fix is simple: use the CLTV delta of the prior (later in the route)
hop.
- Extend SendRequest and QueryRoutesRequest protos
- newRoute function takes fee limit and cuts off routes that exceed it
- queryRoutes, payInvoice and sendPayment commands take the feeLimit inputs and pass them down to newRoute
- When no feeLimit is included, don't enforce any feeLimits at all (by setting feeLimit to maxValue)
In this commit, we introduce a new method to the channel router's config
struct: QueryBandwidth. This method allows the channel router to query
for the up-to-date available bandwidth of a particular link. In the case
that this link emanates from/to us, then we can query the switch to see
if the link is active (if not bandwidth is zero), and return the current
best estimate for the available bandwidth of the link. If the link,
isn't one of ours, then we can thread through the total maximal
capacity of the link.
In order to implement this, the missionControl struct will now query the
switch upon creation to obtain a fresh bandwidth snapshot. We take care
to do this in a distinct db transaction in order to now introduced a
circular waiting condition between the mutexes in bolt, and the channel
state machine.
The aim of this change is to reduce the number of unnecessary failures
during HTLC payment routing as we'll now skip any links that are
inactive, or just don't have enough bandwidth for the payment. Nodes
that have several hundred channels (all of which in various states of
activity and available bandwidth) should see a nice gain from this w.r.t
payment latency.
In this commit, we modify our path finding algorithm to take an
additional set of edges that are currently not known to us that are
used to temporarily extend our graph with during a payment session.
These edges should assist the sender of a payment in successfully
constructing a path to the destination.
These edges should usually represent private channels, as they are not
publicly advertised to the network for routing.
In this commit, we add a new field of routing hints to payments over the
Lightning Network. These routing hints can later be used within the path
finding algorithm in order to craft a path that will reach the
destination succesfully.
In this commit, we modify the edgeWeight function that’s used within
the findPath method to weight fees more heavily than the time lock
value at an edge. We do this in order to greedily prefer lower fees
during path finding. This is a simple stop gap in place of more complex
weighting parameters that will be investigated later.
We also modify the edge distance to use an int64 rather than a float.
Finally an additional test has been added in order to excessive this
new change. Before the commit, the test was failing as we preferred the
route with lower total time lock.
In this commit, we modify the findPaths method to take the max number
of routes to return. With this change, FindRoutes can eventually itself
also take a max number of routes in order to make the function useable
again.
In this commit, we fix an existing bug that could cause lnd to crash if
we sent a payment, and the *destination* sent a temp channel failure
error message. When handling such a message, we’ll look in the nextHop
map to see which channel was *after* the node that sent the payment.
However, if the destination sends this error, then there’ll be no entry
in this map.
To address this case, we now add a prevHop map. If we attempt to lookup
a node in the nextHop map, and they don’t have an entry, then we’ll
consult the prevHop map.
We also update the set of tests to ensure that we’re properly setting
both the prevHop map and the nextHop map.
Before this commit, we wouldn’t properly set the TotalFees attribute.
As a result, our sorting algorithm at the end to select candidate
routes would simply maintain the time-lock order rather than also sort
by total fees. This commit fixes this issue and also allows the test
added in the prior commit to pass.
In this commit, we implement adherence of the disabled bit within a
ChannelUpdate during path finding. If a channel is marked as disabled,
then we won’t attempt to route through it. A test has been added to
exercise this new check.
In this commit, we update path finding to skip an edge if the amount
we’re trying to route through it is below the MinHTLC (in mSAT) value
for that node. We also add a new test to exercise this behavior. In
order for out test to work properly, we’ve modified the JSON to make
the edge to Goku have a higher min HTLC value.
For Part 1 of Issue #275. Create isolated private struct in
networkHandler goroutine that will de-duplicate
announcements added to the batch. The struct contains maps
for each of channel announcements, channel updates, and
node announcements to keep track of unique announcements.
The struct has a Reset method to reset stored announcements, an
AddMsg(lnwire.Message) method to add a new message to the current
batch, and a Batch method to return the set of de-duplicated
announcements.
Also fix a few minor typos.
In this commit we fix an existing miscalculation in the fees that we
prescribe within the onion payloads for multi-hop routes. Before this
commit, if a route had more than 3 hops, then we would erroneously give
the second to last hop zero fees.
In this commit we correct this behavior, and also re-write the fee
calculation code fragment within newRoute for readability and clarity.
There are now only two cases: this is the last hop, and this is any
other hop. In the case of the last hop, simply send the exact amount
with no additional fee. In the case of an intermediate hop, we use the
_prior_ (closer to the destination) hop to calculate the amount of fees
we need, which allows us to compute the incoming flow. Using that
incoming flow, we then can compute the amount that the hop should
forward out.
Partially fixes#391.
In this commit, we correct the fee calculation when converting from a
path to route. Previously we would apply the “no fee” case at the
_first_ hop, rather than the last hop. As a result, we needed to swap
the edges during path finding, otherwise, if the incoming and outgoing
edges had different fee rates, then we would create an invalid onion
payload.
In this commit we now properly switch fee calculation into three cases:
* a single hop route, so there’s no fee
* we’re at the first hop in a multi hop route, and we apply the fee
for the _next_ hop
* we’re at an intermediate hop and the fee calculation proceeds as
normal
In this commit we revert a commit which was added in the past as way to
allow the path -> route conversion code to remain the same, while
properly respecting the necessary time locks and fees. In an upcoming
change, this swap is no longer necessary as we’ll always use: the time
lock of the outgoing node and the fee of the incoming node.
In this commit, rather than reading the final CLTV delta from the
channel graph itself (which would require _both_ edges to be advertised
in order to route over), we now instead have moved to allowing the
receiving node to choose their own final CLTV delta.
This commit fixes a bug that could lead to a deadlock inside bolt db
itself. In a recent commit we allowed a db transaction to be passed
directly into findPath, however, the initial call to graph.ForEachNode
instead passed a _nil_ transaction causing the method itself to create
a _new_ transaction, leading to a deadlock.
We fix this issue by instead re-using the transaction pointer.
This commit modifies the path finding logic such that all path finding
is done inside a _single_ database transaction. With this change, we
ensure that we don’t end up possibly creating hundreds of database
transactions slowing down the path finding and payment sending process
all together.
In this commit we modify the newRoute function to also add the source
node to the nextHopMap index. With this addition the indexes will now
allow the router to react based on failures that occur during the
_first_ hop, meaning the channel directly attached to the source node.
This commit adds three new indexes to the Route struct. These indexes
allow a caller to check if a channel is in the route, check if a node
is in the route, query the next node after a target node, and query the
next channel after a target node. The combination of these new indexes
will allow the ChannelRouter to prune away routes from the available
set in response to any received errors.
Use sort.Slice in FindRoutes function in routing/router.go, as part
of the move to use new language features. Remove sortableRoutes type
wrapper for slice of Routes since it is no longer needed to sort routes.
This commit fixes an oversight in the path finding code when converting
a path into a route. Currently, for the last hop, we’d emplace the
expiry delta of the last hop within the per-hop payload. This was left
over from a prior version of the specification.
To fix this, we’ll now emplace the _absolute_ final HTLC expiry with
the payload, such that, the final hop that verify that the HTLC has not
been tampered with in flight.
This commit fixes an lingering bug within the path finding logic of the
router. Previously we used the edge policy directly attached to the
outgoing channel of the node we were traversing to calculate the fees
and time lock information. This is incorrect, as we instead should be
using the policy of the *connecting* node as we’ll need to pay for
transit as they dictate.
To remedy this, we now grab the incoming+outgoing edges and use those
accordingly when building the initial path.
This commit makes a precautionary change in order to ensure that the
upper bound on the number of iteration’s within our version of Yen’s
algorithm is fixed.
This commit implements some missing functionality, namely before all
time locks were calculated off of a base height of 0 essentially.
That’s incorrect as all time locks within HTLC’s would then be already
expired. We remedy this requesting the latest height when creating a
route to ensure that our time locks are set properly.
This commit adds a new method to the routing.Route struct:
ToHopPayloads. This function will converts a complete route into the
series of per-hop payloads that is to be encoded within each HTLC using
an opaque Sphinx packet.
We can now use this function when creating the sphinx packet to
properly encoded the hop payload for each hop in the route.
This commit inches towards fully validation+adherance of the per-hop
payloads within an HTLC’s route by properly calculating the outgoing
time lock value for each hop according to the current draft
specification.
This commit fixes a pretty nasty unnoticed bug within the main
k-shortest paths algorithm loop. After a new candidate path is found,
the rootPath (the path up to the pivot node) and the spurPath (the
_new_ path after the pivot node) are to be combined into a new candiate
shortest path. The prior logic simply appended the spurPath onto the
end of the rootPath to create a slice. However, if the case that the
currnet rootPath is really a sub-path in a larger slice, then this will
mutate the underlying slice.
This bug would manifest when doing path finding and cause an infinite
loop as the slice kept growing with new spurPaths, causing the loop to
never terminate. We remedy this bug by properly create a new backing
slice, and adding the elements to them rather than incorrectly mutating
an underlying slice.
This commit fixes a bug within the k-shortest paths routine which could
result in a daemon panic when traversing a graph with particular
characteristics. Before referencing the path to create a sub-slice, we
we’re properly asserting that the length of the path was at least as
long as the current rootPath in question. We fix this by simply
ensuring the length of the slice is adequate before proceeding with the
operation.
In this commit the routing package was divided on two separete one,
this was done because 'routing' package start take too much responsibily
on themself, so with following commit:
Routing pacakge:
Enitites:
* channeldb.ChannelEdge
* channeldb.ChannelPolicy
* channeldb.NodeLightning
Responsibilities:
* send topology notification
* find payment paths
* send payment
* apply topology changes to the graph
* prune graph
* validate that funding point exist and corresponds to given one
* to be the source of topology data
Discovery package:
Entities:
* lnwire.AnnounceSignature
* lnwire.ChannelAnnouncement
* lnwire.NodeAnnouncement
* lnwire.ChannelUpdateAnnouncement
Responsibilities:
* validate announcement signatures
* sync topology with newly connected peers
* handle the premature annoucement
* redirect topology changes to the router susbsystem
* broadcast announcement to the rest of the network
* exchange channel announcement proofs
Before that moment all that was in the 'routing' which is quite big for
one subsystem.
split
This commit fixes the issue of broken builds in versions other than go
1.7.5 by sorting according to the sort.Interface interface rather than
the newly available sort.Slice function.
With this commit we make our routing more robust by looking for the
k-shortest paths rather than a single shortest path and using that
unconditionally. In a nut shell Yen’s algorithm does the following:
* Find the shortest path from the source to the destination
* From k=1…K, walk the kth shortest path and find possible
divergence from each node in the path
Our version of Yen’s implemented is slightly modified, rather than
actually increasing the edge weights or remove vertexes from the graph,
we instead use two black-lists: one for edges and the other for
vertexes. Our modified version of Djikstra’s algorithm is then made
aware of these black lists in order to more efficiently implement the
path iteration via spur and root node.
This commit modifies the findRoute method by first calling it findPath,
but also making the following modifications.
First, two new black-listing maps are now passed in. These two maps
contain vertexes but also edges to ignore while performing path
finding. These maps will be used in order to ensure that we don’t
duplicate paths or back-track when executing our KSP algorithm.
Next, we now ensure that the path returned from the findPath function
is ordered properly in the direction of source to target. Such a change
is required for our KSP algorithm to function properly.
This commit modifies the findRoute function to decouple the
validation+creation of a route, from the path finding algorithm itself.
When we say “route”, we mean the full payment route complete with
time-lock and fee information. When we say “path” we simple mean an
ordered set of channel edges from one node to another target node.
With this commit we can now perform path finding independent of route
creation which will be needed in the up coming refactor to implement a
new modified k-shortest paths algorithm.
This commit slightly modified findRoute to accept the node which should
be used as the starting point in our path finding algorithm. With this
change, as we move to a k-shortest paths algorithm this modification
will be needed as all of our path finding attempts won’t always
originate from a the same starting point.
In this commit we now utilize the node distance heap that was added in
a prior commit into our core path finding logic. With this new data
structure, we no longer linearly scan the distance of all vertexes from
the source node when deciding which one to greedily explore.
Instead, we now start with the source added to our distance heap, then
new vertexes are progressively added to our heap as their edges are
explored. With this change, we move the computational complexity of our
path finding algorithm closer to the theoretical limit.
This commit modifies our modified version of Dijkstra's to include
sufficient link capacity within the algorithm’s relaxation condition.
With this change, we’ll now avoid exploring the graph in the direction
of a link that has insufficient capacity, allowing us to terminate path
finding more quickly.
This commit introduces a new heap struct that will be used to keep
track of the next closest node to the source during path finding within
our modified Dijkstra's algorithm.
This commit modifies the path finding routines to properly use the new
channel edge related API exposed by the database. Additionally, a new
type `ChannelHop` has been introduced which couples an edges routing
policy with the capacity and origin chain of the channel.
This fixes the bug reproduced in #114. The prevHop map in newRoute may
include many more edges than what is used to produce the final route, and
thus the check prior to building the route could result with incorrect
errors being reported. We move this check to after the number of edges
to be used for the route is deduced.
