In this commit, we update the tower+link logic to tag a commitment as
the new (tweakless) format if it applies. In order to do this, the
BackupTask method has gained an additional parameter to indicate the
type of commitment that we're attempting to upload. This new tweakless
bool is then threaded through all the way to back up task creation to
ensure that we make the proper input.Input.
Finally, we've added a new test case for each existing test case to test
each case w/ and w/o the tweakless modifier.
In this commit, we update the funding workflow to be aware of the new
channel type that doesn't tweak the remote party's output within the
non-delay script on their commitment transaction. To do this, we now
allow the caller of `InnitChannelReservation` to signal if they want the
old or new (tweakless) commitment style.
The funding tests are also updated to test both funding variants, as
we'll still need to understand the legacy format for older nodes.
In this commit, we update the channel state machine to be aware of
tweakless commits. In several areas, we'll now check the channel's type
to see if it's `SingleFunderTweakless`. If so, then we'll opt to use the
remote party's non-delay based point directly in the script, skipping
any additional cryptographic operations. Along the way we move the
`validateCommitmentSanity` method to be defined _before_ it's used as is
cutomary within the codebase.
Notably, within the `NewUnilateralCloseSummary` method, we'll now _blank
out_ the `SingleTweak` value if the commitment is tweakless. This
indicates to callers the witness type they should map to, as the value
isn't needed at all any longer when sweeping a non-delay output.
We also update the signing+verification tests to also test that we're
able to properly generate a valid witness for the new tweakless
commitment format.
Earlier this delay was needed to increase the likelihood that the DLP
scanario was successfully completed. Since we would risk the connection
being torn down, and the link exit, we could end up with the remote
marking the channel borked, but not finishing the force close.
With the previous set of commits, we should now trigger the force close
before we merk the channel borked, which should ensure we'll resume the
orocess on next restart/connect.
Instead of marking the channel Borked in cases where we want to force
close it, we immediately let the peer fail the link. The channel state
will instead be updated by the channel arbitrator, which will transition
to StateBroadcastCommit, marking the channel borked, then marking the
commitment tx broadcasted right before publishing the force close tx. We
do this to avoid the case where we would mark it Borked, but go down
before being able to publish the closing tx.
Storing the force close tx ensures it will be re-published on startup.
Instead of marking the database state when processing the channel
reestablishment message, we wait for the result of this processing to
arrive in the link, and mark it accordingly in the database here.
We do this move the logic determining whether we should force close the
channel or not, and what state to mark it in the DB, to the same place,
as these need to be consistent.
This commit converts the ErrCommitSyncLocalDataLoss error into a struct,
that also holds the received last unrevoked commit point from the remote
party.
In this commit, we update the router and link to support users
updating the max HTLC policy for their channels. By updating these internal
systems before updating the RPC server and lncli, we protect users from
being shown an option that doesn't actually work.
The policy update logic that resided part in the gossiper and
part in the rpc server is extracted into its own object.
This prepares for additional validation logic to be added for policy
updates that would otherwise make the gossiper heavier.
It is also a small first step towards separation of our own channel data
from the rest of the graph.
Now that the link will remain ineligible until it receives
channel_reestablish from the remote peer, we can remove the channel
reestablish timeout entirely.
This commit modifies the link's EligibleToForward() method only return
true once the peers have successfully exchanged channel reestablish
messages. This is a preliminary step to increasing the reestablish
timeout, ensuring the switch won't try to forward over links while
we're waiting for the remote peer to resume the connection.
Since we will now wait to deliver the event after channel reestablish,
notifying when the link is added to the switch will no longer be
sufficient. Later, we will add receiving reestablish as an additional
requirement for EligibleToForward returning true.
The inactive ntfn is also moved, to ensure that we don't fire inactive
notifications if no corresponding active notification was sent.
Extends the invalid payment details failure with the new accept height
field. This allows sender to distinguish between a genuine invalid
details situation and a delay caused by intermediate nodes.
This commit modifies hodl htlc notification from invoice registry from a
single notification per hash to distinct notifications per htlc. This
prepares for htlc-specific information (accept height) to be added to the
notification.
In this commit, we fix a bug where if a user updates a forwarding policy to be
zero, the update will be applied to the policy correctly on-disk, but not
in-memory.
We solve this issue by having the gossiper return the list of on-disk updated
policies and passing these policies to the switch, so the switch can assume
that zero-valued fields are intentional and not just uninitialized.
Logging for the hop package is controlled via the parent htlcswitch
package. Unfortunately the parent package only controlled the
initialization, but didn't enable the logger when the log level came
in from the main lnd package.
From BOLT 04:
The writer:
- MUST include amt_to_forward and outgoing_cltv_value for every node.
- MUST include short_channel_id for every non-final node.
- MUST NOT include short_channel_id for the final node.
This commit adds an additional return value to
Stream.DecodeWithParsedTypes, which returns the set of types that were
encountered during decoding. The set will contain all known types that
were decoded, as well as unknown odd types that were ignored.
The rationale for the return value (rather than an internal member) is
so that the stream remains stateless.
This return value can be used by callers during decoding to make
assertions as to whether specific types were included in the stream.
This is need, for example, when parsing onion payloads where certain
fields must be included/omitted depending on the hop type.
The original Decode method would incur the additional performance hit of
needing to track the parsed types, so we can selectively enable this
functionality when a decoder requires it by using a helper which
conditionally tracks the parsed types.
Currently the invoice registry cannot tell apart the htlcs that pay to
an invoice. Because htlcs may also be replayed on startup, it isn't
possible to determine the total amount paid to an invoice.
This commit is a first step towards fixing that. It reports the circuit
keys of htlcs to the invoice registry, which forms the basis for
accurate invoice accounting.
In this commit, we begin to enforce a maximum channel commitment fee for
channel initiators when attempting to update their commitment fee. Now,
if the new commitment fee happens to exceed their maximum, then a fee
update of the maximum fee allocation will be proposed instead if needed.
A default of up to 50% of the channel initiator's balance is enforced
for the maximum channel commitment fee. It can be modified through the
`--max-channel-fee-allocation` CLI flag.
In this commit, we update the `HopIterator` to gain awareness of the new
TLV hop payload. The default `HopIterator` will now hide the details of
the TLV from the caller, and return the same `ForwardingInfo` struct in
a uniform manner. We also add a new method: `ExtraOnionBlob` to allow
the caller to obtain the raw EOB (the serialized TLV stream) to pass
around.
Within the link, we'll now pass the EOB information into the invoice
registry. This allows the registry to parse out any additional
information from the EOB that it needs to settle the payment, such as a
preimage shard in the AMP case.
htlcs
config: Adding RejectHTLC field in config struct
This commit adds a RejectHTLC field in the config struct in config.go.
This allows the user to run lnd as a node that does not accept onward
HTLCs.
htlcswitch/switch: Adding a field RejectHTLC to the switch config
This commit adds a field RejectHTLC to the switch config. When the
switch receives an HTLC it will check this flag and if the HTLC is not
from the source hop, the HTLC will be rejected.
htlcswitch/switch: adding check for RejectHTLC flag and incomingChanID
This commit adds a check when receiving UpdateAddHTLC. The check looks
for the RejectHTLC flag set and whether the HTLC is from the sourceHop
(the local switch). If the HTLC is not from the sourceHop, then we
reject the HTLC and return a FailChannelDisabled error.
server: adding RejectHTLC field to initialization of switch
lnd_test: adding test for RejectHTLC
This commit adds a test which tests that a node with the --rejecthtlc
flag will reject any onward HTLCs but still can receive direct HTLCs and
can send HTLCs.
Previously a temporary channel failure was returning for unexpected
malformed htlc failures. This is not what we want to communicate to the
sender, because the sender may apply a penalty to us only.
Returning the temporary channel failure is especially problematic if we
ourselves are the sender and the malformed htlc failure comes from our
direct peer. When interpretating the failure, we aren't able to
distinguish anymore between our channel not having enough balance and
our peer sending an unexpected failure back.
Debug invoices are rarely used nowadays, but keep asking for maintenance
every time refactoring in primarily the invoice registry occurs. We have
passed the cost/benefit tipping point, so therefore the debug invoice
concept is removed in this commit.
Previously the debughtlc flag also controlled whether hodl masks were
active. It is safe to remove that additional condition because the hodl
masks are still guarded by the dev build tag.
