Commit Graph

261 Commits

Author SHA1 Message Date
Eugene
225390ab5b
Merge pull request #4487 from Crypt-iQ/cc_pkg_0723
chainreg: new chainreg package
2020-10-30 06:07:26 -04:00
Eugene
bebe258e2d chainregistry+lnd: moving chainregistry+chainparams to new package 2020-10-29 15:24:14 -04:00
Matheus Degiovani
835c73632b
itest: fix off-by-one mining tests
This fixes tests that were surfaced as flaky.  Usually these tests had
an off-by-one error when mining blocks while waiting for a
CSV-encumbered output.
2020-10-28 14:48:15 -03:00
Oliver Gugger
098598ec74
itest: sort error whitelist 2020-10-28 14:35:11 +01:00
Oliver Gugger
fd684a8ffa
itest: add new errors to whitelist 2020-10-28 14:35:10 +01:00
Oliver Gugger
34439fbc2a
itest: cleanup multi-hop tests
As a preparation to fix an issue with the mempool wait, we clean up the
multi-hop itests a bit. We fix the formatting, use the require library
for assertions consistently and simplify some of the wait predicates.
Commonly used code is also extracted into functions.
2020-10-28 13:38:04 +01:00
Oliver Gugger
d1b46211d8
itest: replace WaitForTxBroadcast with WaitForTxInMempool 2020-10-28 13:29:18 +01:00
Oliver Gugger
1714394add
itest: fix send payment flake
In some cases the router isn't yet fully aware of all newly opened
channels. We need to give it some time to process the updates. Therefore
we add a wait for sending payments to give it a few more changes to
catch up.
2020-10-28 13:22:48 +01:00
Oliver Gugger
e6b0141b10
itest: fix typos, formatting 2020-10-28 13:22:48 +01:00
Matheus Degiovani
16a4687718
itest: Fix flakes when payments cause chan closure
This fixes itest flakes that happen when a payment is attempted that
ends up causing a channel closure.

completePaymentRequests() attempts to monitor the open channels after a
payment is attempted in order to identify that payment was actually
dispatched to a remote node before returning.

However, when the payment actually causes a channel closure (for
example, because the receiver sent an incorrect preimage) this logic
fails in that the channel will no longer the found in the list of open
channels. This could cause a flake when there was enough time for the
channel to close before performing the check.

One example of such a flaky test is failing_link.

This fixes the issue by also checking whether the total number of
channels was reduced, which indicates (assuming itest operations are
being executed serially) that one of the attempted payments affected at
least one channel.
2020-10-27 08:07:49 -03:00
Matheus Degiovani
473f730eec
itest: Sync nodes to chain during singleHop tests
This ensures the Carol and Dave nodes created in the single_hop series
of tests are synced to the latest chain tip generated by the miner
before creating the route that will eventually be used for payments.

This prevents a flake during CI tests where slow processing of blocks by
Carol could cause the generated route to have a final CLTV delta too
short for Dave to accept.

While at it, we switch the test to use the default CLTV delta provided
by QueryRoutes which is now the global default CLTV.
2020-10-26 16:29:39 -03:00
Oliver Gugger
eb74011d5a
itest: add error to whitelist 2020-10-08 20:39:11 +02:00
Oliver Gugger
eb280fd248
itest: use new PSBT functions for funding flow
Now that we have all functions that we need to complete the whole
PSBT channel funding flow, we change the itest to use Dave's wallet
to fund the channel from Carol to Dave through a PSBT.
2020-10-03 10:34:56 +02:00
Oliver Gugger
f114fb3c8d
itest: use require library
We rewrite the test to use the require library to make it a
bit more condensed.
2020-10-03 10:34:56 +02:00
yyforyongyu
310f87e271
itest: save temp miner's logs 2020-10-02 00:04:47 +08:00
yyforyongyu
089e7557be
itest: update log error whitelist 2020-09-29 05:55:36 +08:00
Conner Fromknecht
68ddba7cb7
Merge pull request #4512 from yyforyongyu/channel-balance-verbose
display verbose result in ChannelBalance
2020-09-25 13:31:01 -07:00
Johan T. Halseth
74e62e5c5b
Merge pull request #4589 from yyforyongyu/itest-proper-cleanup
Itest: proper connect/disconnect miner
2020-09-25 10:31:56 +02:00
yyforyongyu
86779fb6a5
itest: fix code lint 2020-09-24 20:51:58 +08:00
yyforyongyu
48f6c47b17
itest: test all ChannelBalance fields 2020-09-24 20:33:23 +08:00
yyforyongyu
1b200c9930
itest: explicit checking ChannelBalance response 2020-09-24 20:30:51 +08:00
Oliver Gugger
9f7d8dd92e
lntest: make compilable without subserver build tags
To make it possible to compile the itests together with the other tests,
we don't want to use anything from the optional subservers.
2020-09-21 21:16:32 +02:00
Olaoluwa Osuntokun
719e32830d
lntest: fix most linter warnings, silence rest
We fix all linter issues except for the 'lostcontext' and 'unparam' ones
as those are too numerous and would increase the diff even more.
Therefore we silence them in the itest directory for now.
Because the linter is still not build tag aware, we also have to silence
the unused and deadcode sub linters to not get false positives.
2020-09-21 21:16:31 +02:00
Olaoluwa Osuntokun
c769247198
lntest: allow the main test files to be buildable w/o the rpctest build tag
In this commit, we modify our build tag set up to allow the main test
files to be buildable w/o the current rpctest tag. We do this so that
those of us that use extensions which will compile live files like
vim-go can once again fix compile errors as we go in our editors.

In order to do this, we now make an external `testsCases` variable, and
have two variants: one that's empty (no build tag), and one that's fully
populated with all our tests (build tag active). As a result, the main
file will now always build regardless of if the build tag is active or
not, but we'll only actually execute tests if the `testCases` variable
has been populated.

As sample run w/ the tag off:
```
=== RUN   TestLightningNetworkDaemon
--- PASS: TestLightningNetworkDaemon (0.00s)
PASS
ok  	github.com/lightningnetwork/lnd/lntest/itest	0.051s
```
2020-09-21 21:16:31 +02:00
Olaoluwa Osuntokun
95634186c2
lntest/itest: move harness to new file
This in prep for a bigger move in the next commit.
2020-09-21 21:16:30 +02:00
Joost Jager
6ae05c6bac
Merge pull request #4592 from joostjager/sweep-deadline
cnct+sweep: cpfp-aware anchor sweeping
2020-09-18 20:15:03 +02:00
Joost Jager
29602e88e8
cnct: cpfp-sweep anchors
For unconfirmed commit tx anchors, supply the sweeper with cpfp info and
a confirmation target fee estimate.

The sweeper will try to pay for the parent commit tx as long as the
current fee estimate exceeds the pre-signed commit tx fee rate.
2020-09-17 12:30:41 +02:00
yyforyongyu
d2d71476bd
lntest: init SignerClient and test DeriveSharedKey 2020-09-17 14:52:36 +08:00
yyforyongyu
e8d9643f3a
itest: test for connection timeout 2020-09-16 11:50:59 +08:00
Olaoluwa Osuntokun
fa342a1230
Merge pull request #4567 from calvinrzachman/max-wumbo
add new max channel size config option
2020-09-15 15:31:47 -07:00
Oliver Gugger
107e135df9
itest: test PSBT funding flow with raw final TX
As we already create two channels in our PSBT funding flow itest we can
easily just submit the final transaction for the second channel in the
raw wire format to test this new functionality.
2020-09-15 08:30:23 +02:00
Calvin Zachman
f5fb64e552 add new max channel size config option
- let users specify their MAXIMUM WUMBO with new config option which sets the maximum channel size lnd will accept
- current implementation is a simple check by the fundingManager rather than anything to do with the ChannelAcceptor
- Add test cases which verify that maximum channel limit is respected for wumbo/non-wumbo channels
- use --maxchansize 0 value to distinguish set/unset config. If user sets max value to 0 it will not do anything as 0 is currently used to indicate to the funding manager that the limit should not be enforced. This seems justifiable since --maxchansize=0 doesn't seem to make sense at first glance.
- add integration test case to ensure that config parsing and valiation is proper. I simplified the funding managers check electing to rely on config.go to correctly parse and set up either i) non wumbo default limit of 0.16 BTC OR ii) wumbo default soft limit of 10 BTC

Addresses: https://github.com/lightningnetwork/lnd/issues/4557
2020-09-14 21:16:32 -05:00
yyforyongyu
567fa9ed10
itest: disable node retrying to connect to miner
Previously the chainbackend connected to the miner using a permanent
connection, which would retry the connection when it’s disconnected.
It would leave multiple connections between the chainbackend and the
miner, causing difficulties in debugging. Currently, there are two
occasions when disconnection happens. One happens when running the open
channel reorg test, the miner is connected/disconnected multiple times
on purpose. The other happens when the chainbackend receives a
MSG_WITNESS_TX type from the miner, which would be considered as an
invalid type and disconnects the miner. With the latter one being fixed
in btcd, the chainbackend will still be disconnected from the miner if
it reaches the ban score by requesting too many notfound messages in a
short time which is why the `--nobanning` flag is added.
2020-09-12 20:09:54 +08:00
yyforyongyu
724f6e0969
itest: require no error when cleaning up chainbackends 2020-09-12 20:09:53 +08:00
yyforyongyu
933d84273a
itest: require no error when tearing down miners 2020-09-12 20:09:52 +08:00
Oliver Gugger
295bd44fea
itest: test custom permissions 2020-09-04 09:50:41 +02:00
Oliver Gugger
decd2d975c
itest: parallelize test steps 2020-09-04 09:50:40 +02:00
Oliver Gugger
9862ee7cd6
itest: extract connection setup 2020-09-04 09:50:40 +02:00
Oliver Gugger
17276e9a7f
itest: use only one timeout context
All these operations should be very fast and can be done in just one
timeout context.
2020-09-04 09:50:39 +02:00
Oliver Gugger
a929f56781
itest: use require for macaroon tests 2020-09-04 09:50:39 +02:00
Oliver Gugger
906011f278
itest: add _test file name suffix to tests
To fix the compiler of some IDEs complaining about types and functions
it cannot find, we rename all files that contain tests back to lnd_xxx_test.go to make
sure they are compiled correctly.
2020-09-04 09:50:39 +02:00
Oliver Gugger
4346a1a3c6
itest: test max pending and abandon channel for shim chans
We change the external funding test to now test two more things: First
that we can open multiple externally funded channels without needing to
lift the default --maxpendingchannels setting. Then we test that we can
use the safer pending_funding_shim_only flag of the AbandonChannel RPC
to get rid of the never confirming external channels.
2020-08-28 12:28:59 +02:00
Oliver Gugger
8ed0efed0b
itest: use NoError in external funding tests 2020-08-28 12:28:59 +02:00
Oliver Gugger
aa6e3f6d01
itest: extract deriveFundingShim
As a preparation to test accepting multiple externally funded channels
at the same time, we extract the deriveFundingShim function from the
external funding integration test.
2020-08-28 12:28:59 +02:00
Conner Fromknecht
a4031f500b
rpcserver+fundingmanager: thread remote_max_htlcs to channel opening 2020-08-24 20:11:33 -07:00
Conner Fromknecht
5c91be3f57
config+rpcserver: allow configurable defualt-remote-max-htlcs 2020-08-24 20:11:23 -07:00
Conner Fromknecht
8a22e4fd1c
lntest/itest: swap want/got channel constraints
Otherwise the fatal error message incorrectly describes what happpened.
2020-08-24 20:08:19 -07:00
Conner Fromknecht
8390e303c1
lntest/itest: add t.Helper() to assertChannelConstraints 2020-08-24 20:08:15 -07:00
Oliver Gugger
c513d0874e
itest: fix pattern for short_chan_id in err whitelist 2020-08-24 09:53:41 +02:00
Olaoluwa Osuntokun
bd18f9acf5
Merge pull request #4427 from yyforyongyu/customize-root-key-id
macaroons: customize root key ID
2020-08-21 19:34:15 -07:00