Commit Graph

310 Commits

Author SHA1 Message Date
Joost Jager
280611ab6e
sweep+walletrpc+lncli: report requested fee preference for pending sweeps
Previously only the fee rate used for the last sweep (the sweep bucket
average) was reported. This commit adds the request fee preference to
the report, which is used to select a bucket and the sweep tx fee rate.
2020-01-09 14:56:08 +01:00
Olaoluwa Osuntokun
22e1f006b1
Merge pull request #3870 from Septem151/rpc-autopilot-fix
Fix typo in "query" rpc for autopilot.
2020-01-02 16:03:05 -08:00
Joost Jager
b1206f67c2
lncli: send key
Extend lncli with a flag that indicates the intention to send
a spontaneous payment. lncli will generate a preimage/hash combination
and send the preimage as a custom record to the recipient.
2019-12-23 21:51:23 +01:00
Joost Jager
15eedd2b1a
lncli: remove debug send
Debug send has been removed some time ago. This is a left over.
2019-12-23 21:51:13 +01:00
Carson Mullins
74d48510c8
Fix typo in "query" rpc for autopilot. 2019-12-22 20:19:36 -06:00
Conner Fromknecht
153cd58c97
lnrpc+lncli: reorder getinfo and use printRespJSON 2019-12-20 01:05:27 -08:00
Conner Fromknecht
8f5d78c875
build+lncli: default to hex encoding for byte slices
This commit swaps out golang/protobuf/jsonpb for a custom variant that
by default prints byte slices as hex, which is more useful for our
setting. Some existing wrapper structs are removed as they can now be
printed directly with the new jsonpb.

!!! NOTE !!!

This commit introduces a breaking change to lncli listinvoices since
payment hashes and preimages will now be printed in hex instead of
base64.
2019-12-20 01:05:08 -08:00
Johan T. Halseth
f28b809778
Merge pull request #3845 from halseth/dialer-withcontext-dialer
[trivial] lncfg+lncli: replace WithDialer->WitchContextDialer
2019-12-19 22:08:02 +01:00
carla
6eab2a06dd
lnrpc+lncli: add feature bits to GetInfo 2019-12-17 23:21:14 +02:00
carla
c27d60b6d1
lncli: add option upfront shutdown to openchannel 2019-12-17 23:18:33 +02:00
Johan T. Halseth
b3b355659b
lncfg+lncli: replace WithDialer->WitchContextDialer
WithDialer is deprecated, use WitchContextDialer instead.
2019-12-17 13:37:29 +01:00
Wilmer Paulino
1fb28b6cd9
Merge pull request #3745 from akovalenko/master
lncli addholdinvoice: allow specifying msat with --amt_msat
2019-12-13 10:45:16 -08:00
Joost Jager
b6eb3a69ba
routing+lnrpc+lncli: allow setting min htlc policy 2019-12-11 00:17:08 +01:00
carla
ef4d9334b7
lncli: Add optional delivery address to close channel
This commit is adapted from @Bluetegu's original
pull request #1462.
2019-12-10 09:13:00 +02:00
Anton Kovalenko
298f35cdfb lncli addholdinvoice: allow specifying msat with --amt_msat
* pass amt and amt_msat to rpc, letting server give an error if both
are present
* take amt from an extra argument if neither amt nor amt_ms are present
2019-12-09 18:45:27 +03:00
Olaoluwa Osuntokun
9079dfbd33
cmd/lncli: exit if user opts to not recover SCB files 2019-12-04 19:24:35 -08:00
Olaoluwa Osuntokun
03ee8c047a
Merge pull request #3698 from aantonop/warn_before_SCB_restore
Warn user before doing SCB restore
2019-12-04 19:17:30 -08:00
Joost Jager
2d19201ede
lnrpc+routerrpc+lncli: add allow_self_payments safety flag 2019-11-26 10:15:46 +01:00
Olaoluwa Osuntokun
cb2b8b4513
Merge pull request #3693 from cfromknecht/tlv-invoice
migrate to tlv for invoice body
2019-11-25 18:00:52 -06:00
Conner Fromknecht
76a2dfd8a6
lnrpc: remove receipt field from invoice 2019-11-22 02:23:24 -08:00
Joost Jager
cdf1aa5bc1
routing: track amt ranges in mc 2019-11-22 11:17:28 +01:00
Joost Jager
62f8cca75b
routing+routerrpc: also expose amt for success results in mc 2019-11-22 11:17:26 +01:00
Andreas M. Antonopoulos
651ca47f37 Warn user before doing SCB restore
SCB restore closes all open channels. We need to warn users that this is what will happen if they try to do an SCB restore.
2019-11-21 08:38:28 -05:00
Joost Jager
f28941c7e4
routing+routerrpc+lncli: enable last hop restriction for payments 2019-11-18 21:03:03 +01:00
Oliver Gugger
7470f696ae
cmd/lncli: increase gRPC max message receive size to 200MiB 2019-11-15 16:21:20 +01:00
Joost Jager
fcf81ed8ff
Merge pull request #3556 from joostjager/query-mc-prob
routerrpc: add queryprob rpc
2019-10-31 08:03:29 +01:00
Joost Jager
fb57255b5c
routerrpc: add mc probability query rpc
Probabilities are no longer returned for querymc calls. To still provide
some insight into the mission control internals, this commit adds a new
rpc that calculates a success probability estimate for a specific node
pair and amount.
2019-10-29 12:32:19 +01:00
Joost Jager
04e7c98461
routerrpc: create pair data proto message
With a separate proto message, it becomes possible to also return the
pair data for a single pair. This prepares for the new mc probability
querying rpc.
2019-10-29 12:32:17 +01:00
Oliver Gugger
1270a8ebae
lncli: add command for baking new macaroons 2019-10-24 10:25:38 +02:00
Joost Jager
fab13900e2
routing+routerrpc: remove probability estimates from mc state snapshot
Probability estimates are amount dependent. Previously we assumed an
amount, but that starts to make less sense when we make probability more
dependent on amounts in the future.
2019-10-22 15:52:36 +02:00
Wilmer Paulino
cbf7e4886a
multi: extend QueryRoutes RPC with CLTV limit field 2019-10-11 18:07:39 -04:00
Olaoluwa Osuntokun
2a3538fec8
Merge pull request #3360 from tyzbit/3357_start-time
rpcserver: startTime defaults to the unix epoch
2019-10-07 16:48:23 -07:00
tyzbit
be989a85ff lncli: start_time defaults to 24 hours ago
Here we set start_time to 24 hours prior
if it's not provided on the CLI.  The
effect of this is when you don't provide
a start_time:

CLI: -24h
RPC: Unix Epoch
2019-10-03 18:12:39 -04:00
tyzbit
8891346cb2 rpcserver: startTime defaults to the unix epoch
Fixes https://github.com/lightningnetwork/lnd/issues/3357.  When
start_time isn't specified, its default value is 0.  This meant when
users explicitly specified a start_time of 0, we would incorrectly set
start_time to 24 hours in the past.  Now, n0 means n0.
2019-10-03 18:12:21 -04:00
Joost Jager
b58dbb2d70
multi: fix canceled spelling 2019-10-03 17:27:36 +02:00
Lars Lehtonen
dade977d7b
cmd: stdlib context 2019-09-28 15:44:45 -07:00
Olaoluwa Osuntokun
18f88cbd8d
Merge pull request #3440 from joostjager/buildroute
routing: add build route functionality
2019-09-24 20:24:24 -07:00
Joost Jager
03d33cbd6b
lncli: update SendToRoute to also parse new route format 2019-09-24 10:00:48 +02:00
Joost Jager
6328b2e989
lncli: add BuildRoute function 2019-09-24 10:00:46 +02:00
Valentine Wallace
5aefe8bc70
lncli: allow users to update max HTLC channel policies
In this commit, we enable callers of UpdateChannelPolicy to
specify their desired max HTLC forwarding policy for one or
multiple channels over lncli.
2019-09-23 13:07:14 +02:00
Conner Fromknecht
7252e175dc
lncli+wtclientrpc: remove wtclientrpc build tag, compile by default 2019-09-18 17:26:15 -07:00
Joost Jager
3d7de2ad39
multi: remove dead code 2019-09-10 17:21:59 +02:00
Johan T. Halseth
fa21601d07
lnd+cmd/lnd/main: add ListenerCfg to Main
ListenerCfg allows passing custom listeners to the main method, to be
used for the wallet unlocker and rpc server. If these are set these will
be used instead of the regular RPC listeners.
2019-09-05 09:22:54 +02:00
Olaoluwa Osuntokun
c397a2ea78
Merge pull request #3438 from alrs/fix-cmd-error
cmd/lncli: Fix dropped error
2019-09-03 19:59:30 -07:00
Wilmer Paulino
06f544a78c
cmd/lncli: return error upon missing channel backup when parsing 2019-09-03 14:04:38 -07:00
Lars Lehtonen
686fee57ee cmd/lncli: Fix dropped error 2019-09-03 12:29:26 -07:00
Joost Jager
ff0c5a0d5e
routing: process successes in mission control
This commit modifies paymentLifecycle so that it not only feeds
failures into mission control, but successes as well.
This allows for more accurate probability estimates. Previously,
the success probability for a successful pair and a pair with
no history was equal. There was no force that pushed towards
previously successful routes.
2019-08-23 09:15:41 +02:00
Olaoluwa Osuntokun
80c6759140
Merge pull request #3400 from wpaulino/lncli-getinfo-synced-to-graph
cmd/lncli: properly set synced_to_graph for getinfo command
2019-08-16 12:58:02 -07:00
Wilmer Paulino
51216c6e5e
cmd/lncli: properly set synced_to_graph for getinfo command 2019-08-13 17:40:18 -07:00
Joost Jager
f1769c8c8c
routing: convert to node pair based
Previously mission control tracked failures on a per node, per channel basis.
This commit changes this to tracking on the level of directed node pairs. The goal
of moving to this coarser-grained level is to reduce the number of required
payment attempts without compromising payment reliability.
2019-08-13 19:21:37 +02:00