lnd.xprv/routing/router.go

2539 lines
82 KiB
Go
Raw Normal View History

routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
package routing
import (
"bytes"
"fmt"
"runtime"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"sync"
"sync/atomic"
"time"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"github.com/btcsuite/btcd/btcec"
"github.com/btcsuite/btcd/wire"
"github.com/btcsuite/btcutil"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"github.com/davecgh/go-spew/spew"
"github.com/go-errors/errors"
sphinx "github.com/lightningnetwork/lightning-onion"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/channeldb/kvdb"
2020-03-05 15:54:03 +03:00
"github.com/lightningnetwork/lnd/clock"
"github.com/lightningnetwork/lnd/htlcswitch"
"github.com/lightningnetwork/lnd/input"
"github.com/lightningnetwork/lnd/lntypes"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"github.com/lightningnetwork/lnd/lnwallet"
"github.com/lightningnetwork/lnd/lnwallet/chanvalidate"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
"github.com/lightningnetwork/lnd/lnwire"
"github.com/lightningnetwork/lnd/multimutex"
"github.com/lightningnetwork/lnd/record"
"github.com/lightningnetwork/lnd/routing/chainview"
"github.com/lightningnetwork/lnd/routing/route"
"github.com/lightningnetwork/lnd/ticker"
"github.com/lightningnetwork/lnd/zpay32"
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
)
const (
// DefaultPayAttemptTimeout is the default payment attempt timeout. The
// payment attempt timeout defines the duration after which we stop
// trying more routes for a payment.
DefaultPayAttemptTimeout = time.Duration(time.Second * 60)
// DefaultChannelPruneExpiry is the default duration used to determine
// if a channel should be pruned or not.
DefaultChannelPruneExpiry = time.Duration(time.Hour * 24 * 14)
// defaultStatInterval governs how often the router will log non-empty
// stats related to processing new channels, updates, or node
// announcements.
defaultStatInterval = time.Minute
)
var (
// ErrRouterShuttingDown is returned if the router is in the process of
// shutting down.
ErrRouterShuttingDown = fmt.Errorf("router shutting down")
)
// ChannelGraphSource represents the source of information about the topology
// of the lightning network. It's responsible for the addition of nodes, edges,
// applying edge updates, and returning the current block height with which the
// topology is synchronized.
type ChannelGraphSource interface {
// AddNode is used to add information about a node to the router
// database. If the node with this pubkey is not present in an existing
// channel, it will be ignored.
AddNode(node *channeldb.LightningNode) error
// AddEdge is used to add edge/channel to the topology of the router,
// after all information about channel will be gathered this
// edge/channel might be used in construction of payment path.
AddEdge(edge *channeldb.ChannelEdgeInfo) error
// AddProof updates the channel edge info with proof which is needed to
// properly announce the edge to the rest of the network.
AddProof(chanID lnwire.ShortChannelID, proof *channeldb.ChannelAuthProof) error
// UpdateEdge is used to update edge information, without this message
// edge considered as not fully constructed.
UpdateEdge(policy *channeldb.ChannelEdgePolicy) error
// IsStaleNode returns true if the graph source has a node announcement
// for the target node with a more recent timestamp. This method will
// also return true if we don't have an active channel announcement for
// the target node.
IsStaleNode(node route.Vertex, timestamp time.Time) bool
// IsPublicNode determines whether the given vertex is seen as a public
// node in the graph from the graph's source node's point of view.
IsPublicNode(node route.Vertex) (bool, error)
// IsKnownEdge returns true if the graph source already knows of the
// passed channel ID either as a live or zombie edge.
IsKnownEdge(chanID lnwire.ShortChannelID) bool
// IsStaleEdgePolicy returns true if the graph source has a channel
// edge for the passed channel ID (and flags) that have a more recent
// timestamp.
IsStaleEdgePolicy(chanID lnwire.ShortChannelID, timestamp time.Time,
flags lnwire.ChanUpdateChanFlags) bool
// MarkEdgeLive clears an edge from our zombie index, deeming it as
// live.
MarkEdgeLive(chanID lnwire.ShortChannelID) error
// ForAllOutgoingChannels is used to iterate over all channels
// emanating from the "source" node which is the center of the
// star-graph.
ForAllOutgoingChannels(cb func(c *channeldb.ChannelEdgeInfo,
e *channeldb.ChannelEdgePolicy) error) error
// CurrentBlockHeight returns the block height from POV of the router
// subsystem.
CurrentBlockHeight() (uint32, error)
// GetChannelByID return the channel by the channel id.
GetChannelByID(chanID lnwire.ShortChannelID) (*channeldb.ChannelEdgeInfo,
*channeldb.ChannelEdgePolicy, *channeldb.ChannelEdgePolicy, error)
// FetchLightningNode attempts to look up a target node by its identity
// public key. channeldb.ErrGraphNodeNotFound is returned if the node
// doesn't exist within the graph.
FetchLightningNode(route.Vertex) (*channeldb.LightningNode, error)
// ForEachNode is used to iterate over every node in the known graph.
ForEachNode(func(node *channeldb.LightningNode) error) error
// ForEachChannel is used to iterate over every channel in the known
// graph.
ForEachChannel(func(chanInfo *channeldb.ChannelEdgeInfo,
e1, e2 *channeldb.ChannelEdgePolicy) error) error
}
// PaymentAttemptDispatcher is used by the router to send payment attempts onto
// the network, and receive their results.
type PaymentAttemptDispatcher interface {
// SendHTLC is a function that directs a link-layer switch to
// forward a fully encoded payment to the first hop in the route
// denoted by its public key. A non-nil error is to be returned if the
// payment was unsuccessful.
SendHTLC(firstHop lnwire.ShortChannelID,
paymentID uint64,
htlcAdd *lnwire.UpdateAddHTLC) error
// GetPaymentResult returns the the result of the payment attempt with
// the given paymentID. The method returns a channel where the payment
// result will be sent when available, or an error is encountered
// during forwarding. When a result is received on the channel, the
// HTLC is guaranteed to no longer be in flight. The switch shutting
// down is signaled by closing the channel. If the paymentID is
// unknown, ErrPaymentIDNotFound will be returned.
GetPaymentResult(paymentID uint64, paymentHash lntypes.Hash,
deobfuscator htlcswitch.ErrorDecrypter) (
<-chan *htlcswitch.PaymentResult, error)
}
// PaymentSessionSource is an interface that defines a source for the router to
// retrive new payment sessions.
type PaymentSessionSource interface {
// NewPaymentSession creates a new payment session that will produce
// routes to the given target. An optional set of routing hints can be
// provided in order to populate additional edges to explore when
// finding a path to the payment's destination.
NewPaymentSession(p *LightningPayment) (PaymentSession, error)
// NewPaymentSessionEmpty creates a new paymentSession instance that is
// empty, and will be exhausted immediately. Used for failure reporting
// to missioncontrol for resumed payment we don't want to make more
// attempts for.
NewPaymentSessionEmpty() PaymentSession
}
// MissionController is an interface that exposes failure reporting and
// probability estimation.
type MissionController interface {
// ReportPaymentFail reports a failed payment to mission control as
// input for future probability estimates. It returns a bool indicating
// whether this error is a final error and no further payment attempts
// need to be made.
ReportPaymentFail(paymentID uint64, rt *route.Route,
failureSourceIdx *int, failure lnwire.FailureMessage) (
*channeldb.FailureReason, error)
// ReportPaymentSuccess reports a successful payment to mission control as input
// for future probability estimates.
ReportPaymentSuccess(paymentID uint64, rt *route.Route) error
// GetProbability is expected to return the success probability of a
// payment from fromNode along edge.
GetProbability(fromNode, toNode route.Vertex,
amt lnwire.MilliSatoshi) float64
}
// FeeSchema is the set fee configuration for a Lightning Node on the network.
// Using the coefficients described within the schema, the required fee to
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// forward outgoing payments can be derived.
type FeeSchema struct {
// BaseFee is the base amount of milli-satoshis that will be chained
// for ANY payment forwarded.
BaseFee lnwire.MilliSatoshi
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// FeeRate is the rate that will be charged for forwarding payments.
// This value should be interpreted as the numerator for a fraction
// (fixed point arithmetic) whose denominator is 1 million. As a result
// the effective fee rate charged per mSAT will be: (amount *
// FeeRate/1,000,000).
FeeRate uint32
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// ChannelPolicy holds the parameters that determine the policy we enforce
// when forwarding payments on a channel. These parameters are communicated
// to the rest of the network in ChannelUpdate messages.
type ChannelPolicy struct {
// FeeSchema holds the fee configuration for a channel.
FeeSchema
// TimeLockDelta is the required HTLC timelock delta to be used
// when forwarding payments.
TimeLockDelta uint32
// MaxHTLC is the maximum HTLC size including fees we are allowed to
// forward over this channel.
MaxHTLC lnwire.MilliSatoshi
// MinHTLC is the minimum HTLC size including fees we are allowed to
// forward over this channel.
MinHTLC *lnwire.MilliSatoshi
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Config defines the configuration for the ChannelRouter. ALL elements within
// the configuration MUST be non-nil for the ChannelRouter to carry out its
// duties.
type Config struct {
// Graph is the channel graph that the ChannelRouter will use to gather
// metrics from and also to carry out path finding queries.
// TODO(roasbeef): make into an interface
Graph *channeldb.ChannelGraph
// Chain is the router's source to the most up-to-date blockchain data.
// All incoming advertised channels will be checked against the chain
// to ensure that the channels advertised are still open.
Chain lnwallet.BlockChainIO
// ChainView is an instance of a FilteredChainView which is used to
// watch the sub-set of the UTXO set (the set of active channels) that
// we need in order to properly maintain the channel graph.
ChainView chainview.FilteredChainView
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Payer is an instance of a PaymentAttemptDispatcher and is used by
// the router to send payment attempts onto the network, and receive
// their results.
Payer PaymentAttemptDispatcher
// Control keeps track of the status of ongoing payments, ensuring we
// can properly resume them across restarts.
Control ControlTower
// MissionControl is a shared memory of sorts that executions of
// payment path finding use in order to remember which vertexes/edges
// were pruned from prior attempts. During SendPayment execution,
// errors sent by nodes are mapped into a vertex or edge to be pruned.
// Each run will then take into account this set of pruned
// vertexes/edges to reduce route failure and pass on graph information
// gained to the next execution.
MissionControl MissionController
// SessionSource defines a source for the router to retrieve new payment
// sessions.
SessionSource PaymentSessionSource
// ChannelPruneExpiry is the duration used to determine if a channel
// should be pruned or not. If the delta between now and when the
// channel was last updated is greater than ChannelPruneExpiry, then
// the channel is marked as a zombie channel eligible for pruning.
ChannelPruneExpiry time.Duration
// GraphPruneInterval is used as an interval to determine how often we
// should examine the channel graph to garbage collect zombie channels.
GraphPruneInterval time.Duration
// QueryBandwidth is a method that allows the router to query the lower
// link layer to determine the up to date available bandwidth at a
// prospective link to be traversed. If the link isn't available, then
// a value of zero should be returned. Otherwise, the current up to
// date knowledge of the available bandwidth of the link should be
// returned.
QueryBandwidth func(edge *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi
2018-08-30 05:05:13 +03:00
// NextPaymentID is a method that guarantees to return a new, unique ID
// each time it is called. This is used by the router to generate a
// unique payment ID for each payment it attempts to send, such that
// the switch can properly handle the HTLC.
NextPaymentID func() (uint64, error)
2018-08-30 05:05:13 +03:00
// AssumeChannelValid toggles whether or not the router will check for
// spentness of channel outpoints. For neutrino, this saves long rescans
// from blocking initial usage of the daemon.
2018-08-30 05:05:13 +03:00
AssumeChannelValid bool
// PathFindingConfig defines global path finding parameters.
PathFindingConfig PathFindingConfig
2020-03-05 15:54:03 +03:00
// Clock is mockable time provider.
Clock clock.Clock
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// EdgeLocator is a struct used to identify a specific edge.
type EdgeLocator struct {
// ChannelID is the channel of this edge.
ChannelID uint64
// Direction takes the value of 0 or 1 and is identical in definition to
// the channel direction flag. A value of 0 means the direction from the
// lower node pubkey to the higher.
Direction uint8
}
// String returns a human readable version of the edgeLocator values.
func (e *EdgeLocator) String() string {
return fmt.Sprintf("%v:%v", e.ChannelID, e.Direction)
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// ChannelRouter is the layer 3 router within the Lightning stack. Below the
// ChannelRouter is the HtlcSwitch, and below that is the Bitcoin blockchain
// itself. The primary role of the ChannelRouter is to respond to queries for
// potential routes that can support a payment amount, and also general graph
// reachability questions. The router will prune the channel graph
// automatically as new blocks are discovered which spend certain known funding
// outpoints, thereby closing their respective channels.
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
type ChannelRouter struct {
ntfnClientCounter uint64 // To be used atomically.
started uint32 // To be used atomically.
stopped uint32 // To be used atomically.
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
bestHeight uint32 // To be used atomically.
// cfg is a copy of the configuration struct that the ChannelRouter was
// initialized with.
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
cfg *Config
// selfNode is the center of the star-graph centered around the
// ChannelRouter. The ChannelRouter uses this node as a starting point
// when doing any path finding.
selfNode *channeldb.LightningNode
// newBlocks is a channel in which new blocks connected to the end of
// the main chain are sent over, and blocks updated after a call to
// UpdateFilter.
newBlocks <-chan *chainview.FilteredBlock
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// staleBlocks is a channel in which blocks disconnected fromt the end
// of our currently known best chain are sent over.
staleBlocks <-chan *chainview.FilteredBlock
// networkUpdates is a channel that carries new topology updates
// messages from outside the ChannelRouter to be processed by the
// networkHandler.
networkUpdates chan *routingMsg
// topologyClients maps a client's unique notification ID to a
// topologyClient client that contains its notification dispatch
// channel.
topologyClients map[uint64]*topologyClient
// ntfnClientUpdates is a channel that's used to send new updates to
// topology notification clients to the ChannelRouter. Updates either
// add a new notification client, or cancel notifications for an
// existing client.
ntfnClientUpdates chan *topologyClientUpdate
// channelEdgeMtx is a mutex we use to make sure we process only one
// ChannelEdgePolicy at a time for a given channelID, to ensure
// consistency between the various database accesses.
channelEdgeMtx *multimutex.Mutex
// statTicker is a resumable ticker that logs the router's progress as
// it discovers channels or receives updates.
statTicker ticker.Ticker
// stats tracks newly processed channels, updates, and node
// announcements over a window of defaultStatInterval.
stats *routerStats
sync.RWMutex
quit chan struct{}
wg sync.WaitGroup
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// A compile time check to ensure ChannelRouter implements the
// ChannelGraphSource interface.
var _ ChannelGraphSource = (*ChannelRouter)(nil)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// New creates a new instance of the ChannelRouter with the specified
// configuration parameters. As part of initialization, if the router detects
// that the channel graph isn't fully in sync with the latest UTXO (since the
// channel graph is a subset of the UTXO set) set, then the router will proceed
// to fully sync to the latest state of the UTXO set.
func New(cfg Config) (*ChannelRouter, error) {
selfNode, err := cfg.Graph.SourceNode()
if err != nil {
return nil, err
}
r := &ChannelRouter{
cfg: &cfg,
networkUpdates: make(chan *routingMsg),
topologyClients: make(map[uint64]*topologyClient),
ntfnClientUpdates: make(chan *topologyClientUpdate),
channelEdgeMtx: multimutex.NewMutex(),
selfNode: selfNode,
statTicker: ticker.New(defaultStatInterval),
stats: new(routerStats),
quit: make(chan struct{}),
}
return r, nil
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// Start launches all the goroutines the ChannelRouter requires to carry out
// its duties. If the router has already been started, then this method is a
// noop.
func (r *ChannelRouter) Start() error {
if !atomic.CompareAndSwapUint32(&r.started, 0, 1) {
return nil
}
log.Tracef("Channel Router starting")
bestHash, bestHeight, err := r.cfg.Chain.GetBestBlock()
if err != nil {
return err
}
// If the graph has never been pruned, or hasn't fully been created yet,
// then we don't treat this as an explicit error.
if _, _, err := r.cfg.Graph.PruneTip(); err != nil {
switch {
case err == channeldb.ErrGraphNeverPruned:
fallthrough
case err == channeldb.ErrGraphNotFound:
// If the graph has never been pruned, then we'll set
// the prune height to the current best height of the
// chain backend.
_, err = r.cfg.Graph.PruneGraph(
nil, bestHash, uint32(bestHeight),
)
if err != nil {
return err
}
default:
return err
}
}
// If AssumeChannelValid is present, then we won't rely on pruning
// channels from the graph based on their spentness, but whether they
// are considered zombies or not.
if r.cfg.AssumeChannelValid {
if err := r.pruneZombieChans(); err != nil {
return err
}
} else {
// Otherwise, we'll use our filtered chain view to prune
// channels as soon as they are detected as spent on-chain.
if err := r.cfg.ChainView.Start(); err != nil {
return err
}
// Once the instance is active, we'll fetch the channel we'll
// receive notifications over.
r.newBlocks = r.cfg.ChainView.FilteredBlocks()
r.staleBlocks = r.cfg.ChainView.DisconnectedBlocks()
// Before we perform our manual block pruning, we'll construct
// and apply a fresh chain filter to the active
// FilteredChainView instance. We do this before, as otherwise
// we may miss on-chain events as the filter hasn't properly
// been applied.
channelView, err := r.cfg.Graph.ChannelView()
if err != nil && err != channeldb.ErrGraphNoEdgesFound {
return err
}
log.Infof("Filtering chain using %v channels active",
len(channelView))
if len(channelView) != 0 {
err = r.cfg.ChainView.UpdateFilter(
channelView, uint32(bestHeight),
)
if err != nil {
return err
}
}
// Before we begin normal operation of the router, we first need
// to synchronize the channel graph to the latest state of the
// UTXO set.
if err := r.syncGraphWithChain(); err != nil {
return err
}
// Finally, before we proceed, we'll prune any unconnected nodes
// from the graph in order to ensure we maintain a tight graph
// of "useful" nodes.
err = r.cfg.Graph.PruneGraphNodes()
if err != nil && err != channeldb.ErrGraphNodesNotFound {
return err
}
}
// If any payments are still in flight, we resume, to make sure their
// results are properly handled.
payments, err := r.cfg.Control.FetchInFlightPayments()
if err != nil {
return err
}
for _, payment := range payments {
log.Infof("Resuming payment with hash %v", payment.Info.PaymentHash)
r.wg.Add(1)
go func(payment *channeldb.InFlightPayment) {
defer r.wg.Done()
// We create a dummy, empty payment session such that
// we won't make another payment attempt when the
// result for the in-flight attempt is received.
paySession := r.cfg.SessionSource.NewPaymentSessionEmpty()
// We pass in a zero timeout value, to indicate we
// don't need it to timeout. It will stop immediately
// after the existing attempt has finished anyway. We
// also set a zero fee limit, as no more routes should
// be tried.
_, _, err := r.sendPayment(
payment.Info.Value, 0,
payment.Info.PaymentHash, 0, paySession,
)
if err != nil {
log.Errorf("Resuming payment with hash %v "+
"failed: %v.", payment.Info.PaymentHash, err)
return
}
log.Infof("Resumed payment with hash %v completed.",
payment.Info.PaymentHash)
}(payment)
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
r.wg.Add(1)
go r.networkHandler()
return nil
}
// Stop signals the ChannelRouter to gracefully halt all routines. This method
// will *block* until all goroutines have excited. If the channel router has
// already stopped then this method will return immediately.
func (r *ChannelRouter) Stop() error {
if !atomic.CompareAndSwapUint32(&r.stopped, 0, 1) {
return nil
}
log.Tracef("Channel Router shutting down")
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Our filtered chain view could've only been started if
// AssumeChannelValid isn't present.
if !r.cfg.AssumeChannelValid {
if err := r.cfg.ChainView.Stop(); err != nil {
return err
}
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
close(r.quit)
r.wg.Wait()
return nil
}
// syncGraphWithChain attempts to synchronize the current channel graph with
// the latest UTXO set state. This process involves pruning from the channel
// graph any channels which have been closed by spending their funding output
// since we've been down.
func (r *ChannelRouter) syncGraphWithChain() error {
// First, we'll need to check to see if we're already in sync with the
// latest state of the UTXO set.
bestHash, bestHeight, err := r.cfg.Chain.GetBestBlock()
if err != nil {
return err
}
r.bestHeight = uint32(bestHeight)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
pruneHash, pruneHeight, err := r.cfg.Graph.PruneTip()
if err != nil {
switch {
// If the graph has never been pruned, or hasn't fully been
// created yet, then we don't treat this as an explicit error.
case err == channeldb.ErrGraphNeverPruned:
case err == channeldb.ErrGraphNotFound:
default:
return err
}
}
log.Infof("Prune tip for Channel Graph: height=%v, hash=%v", pruneHeight,
pruneHash)
switch {
// If the graph has never been pruned, then we can exit early as this
// entails it's being created for the first time and hasn't seen any
// block or created channels.
case pruneHeight == 0 || pruneHash == nil:
return nil
// If the block hashes and heights match exactly, then we don't need to
// prune the channel graph as we're already fully in sync.
case bestHash.IsEqual(pruneHash) && uint32(bestHeight) == pruneHeight:
return nil
}
// If the main chain blockhash at prune height is different from the
// prune hash, this might indicate the database is on a stale branch.
mainBlockHash, err := r.cfg.Chain.GetBlockHash(int64(pruneHeight))
if err != nil {
return err
}
// While we are on a stale branch of the chain, walk backwards to find
// first common block.
for !pruneHash.IsEqual(mainBlockHash) {
log.Infof("channel graph is stale. Disconnecting block %v "+
"(hash=%v)", pruneHeight, pruneHash)
// Prune the graph for every channel that was opened at height
// >= pruneHeight.
_, err := r.cfg.Graph.DisconnectBlockAtHeight(pruneHeight)
if err != nil {
return err
}
pruneHash, pruneHeight, err = r.cfg.Graph.PruneTip()
if err != nil {
switch {
// If at this point the graph has never been pruned, we
// can exit as this entails we are back to the point
// where it hasn't seen any block or created channels,
// alas there's nothing left to prune.
case err == channeldb.ErrGraphNeverPruned:
return nil
case err == channeldb.ErrGraphNotFound:
return nil
default:
return err
}
}
mainBlockHash, err = r.cfg.Chain.GetBlockHash(int64(pruneHeight))
if err != nil {
return err
}
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
log.Infof("Syncing channel graph from height=%v (hash=%v) to height=%v "+
"(hash=%v)", pruneHeight, pruneHash, bestHeight, bestHash)
// If we're not yet caught up, then we'll walk forward in the chain
// pruning the channel graph with each new block that hasn't yet been
// consumed by the channel graph.
var spentOutputs []*wire.OutPoint
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
for nextHeight := pruneHeight + 1; nextHeight <= uint32(bestHeight); nextHeight++ {
// Break out of the rescan early if a shutdown has been
// requested, otherwise long rescans will block the daemon from
// shutting down promptly.
select {
case <-r.quit:
return ErrRouterShuttingDown
default:
}
// Using the next height, request a manual block pruning from
// the chainview for the particular block hash.
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
nextHash, err := r.cfg.Chain.GetBlockHash(int64(nextHeight))
if err != nil {
return err
}
filterBlock, err := r.cfg.ChainView.FilterBlock(nextHash)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil {
return err
}
// We're only interested in all prior outputs that have been
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// spent in the block, so collate all the referenced previous
// outpoints within each tx and input.
for _, tx := range filterBlock.Transactions {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
for _, txIn := range tx.TxIn {
spentOutputs = append(spentOutputs,
&txIn.PreviousOutPoint)
}
}
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// With the spent outputs gathered, attempt to prune the channel graph,
// also passing in the best hash+height so the prune tip can be updated.
closedChans, err := r.cfg.Graph.PruneGraph(
spentOutputs, bestHash, uint32(bestHeight),
)
if err != nil {
return err
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
log.Infof("Graph pruning complete: %v channels were closed since "+
"height %v", len(closedChans), pruneHeight)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
return nil
}
// pruneZombieChans is a method that will be called periodically to prune out
// any "zombie" channels. We consider channels zombies if *both* edges haven't
// been updated since our zombie horizon. If AssumeChannelValid is present,
// we'll also consider channels zombies if *both* edges are disabled. This
// usually signals that a channel has been closed on-chain. We do this
// periodically to keep a healthy, lively routing table.
func (r *ChannelRouter) pruneZombieChans() error {
chansToPrune := make(map[uint64]struct{})
chanExpiry := r.cfg.ChannelPruneExpiry
log.Infof("Examining channel graph for zombie channels")
// A helper method to detect if the channel belongs to this node
isSelfChannelEdge := func(info *channeldb.ChannelEdgeInfo) bool {
return info.NodeKey1Bytes == r.selfNode.PubKeyBytes ||
info.NodeKey2Bytes == r.selfNode.PubKeyBytes
}
// First, we'll collect all the channels which are eligible for garbage
// collection due to being zombies.
filterPruneChans := func(info *channeldb.ChannelEdgeInfo,
e1, e2 *channeldb.ChannelEdgePolicy) error {
// Exit early in case this channel is already marked to be pruned
if _, markedToPrune := chansToPrune[info.ChannelID]; markedToPrune {
return nil
}
// We'll ensure that we don't attempt to prune our *own*
// channels from the graph, as in any case this should be
// re-advertised by the sub-system above us.
if isSelfChannelEdge(info) {
return nil
}
// If *both* edges haven't been updated for a period of
// chanExpiry, then we'll mark the channel itself as eligible
// for graph pruning.
var e1Zombie, e2Zombie bool
if e1 != nil {
e1Zombie = time.Since(e1.LastUpdate) >= chanExpiry
if e1Zombie {
log.Tracef("Edge #1 of ChannelID(%v) last "+
"update: %v", info.ChannelID,
e1.LastUpdate)
}
}
if e2 != nil {
e2Zombie = time.Since(e2.LastUpdate) >= chanExpiry
if e2Zombie {
log.Tracef("Edge #2 of ChannelID(%v) last "+
"update: %v", info.ChannelID,
e2.LastUpdate)
}
}
// If the channel is not considered zombie, we can move on to
// the next.
if !e1Zombie || !e2Zombie {
return nil
}
log.Debugf("ChannelID(%v) is a zombie, collecting to prune",
info.ChannelID)
// TODO(roasbeef): add ability to delete single directional edge
chansToPrune[info.ChannelID] = struct{}{}
return nil
}
// If AssumeChannelValid is present we'll look at the disabled bit for both
// edges. If they're both disabled, then we can interpret this as the
// channel being closed and can prune it from our graph.
if r.cfg.AssumeChannelValid {
disabledChanIDs, err := r.cfg.Graph.DisabledChannelIDs()
if err != nil {
return fmt.Errorf("unable to get disabled channels ids "+
"chans: %v", err)
}
disabledEdges, err := r.cfg.Graph.FetchChanInfos(disabledChanIDs)
if err != nil {
return fmt.Errorf("unable to fetch disabled channels edges "+
"chans: %v", err)
}
// Ensuring we won't prune our own channel from the graph.
for _, disabledEdge := range disabledEdges {
if !isSelfChannelEdge(disabledEdge.Info) {
chansToPrune[disabledEdge.Info.ChannelID] = struct{}{}
}
}
}
startTime := time.Unix(0, 0)
endTime := time.Now().Add(-1 * chanExpiry)
oldEdges, err := r.cfg.Graph.ChanUpdatesInHorizon(startTime, endTime)
if err != nil {
return fmt.Errorf("unable to fetch expired channel updates "+
"chans: %v", err)
}
for _, u := range oldEdges {
filterPruneChans(u.Info, u.Policy1, u.Policy2)
}
log.Infof("Pruning %v zombie channels", len(chansToPrune))
// With the set of zombie-like channels obtained, we'll do another pass
// to delete them from the channel graph.
toPrune := make([]uint64, 0, len(chansToPrune))
for chanID := range chansToPrune {
toPrune = append(toPrune, chanID)
log.Tracef("Pruning zombie channel with ChannelID(%v)", chanID)
}
if err := r.cfg.Graph.DeleteChannelEdges(toPrune...); err != nil {
return fmt.Errorf("unable to delete zombie channels: %v", err)
}
// With the channels pruned, we'll also attempt to prune any nodes that
// were a part of them.
err = r.cfg.Graph.PruneGraphNodes()
if err != nil && err != channeldb.ErrGraphNodesNotFound {
return fmt.Errorf("unable to prune graph nodes: %v", err)
}
return nil
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// networkHandler is the primary goroutine for the ChannelRouter. The roles of
// this goroutine include answering queries related to the state of the
// network, pruning the graph on new block notification, applying network
// updates, and registering new topology clients.
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
//
// NOTE: This MUST be run as a goroutine.
func (r *ChannelRouter) networkHandler() {
defer r.wg.Done()
graphPruneTicker := time.NewTicker(r.cfg.GraphPruneInterval)
defer graphPruneTicker.Stop()
defer r.statTicker.Stop()
r.stats.Reset()
// We'll use this validation barrier to ensure that we process all jobs
// in the proper order during parallel validation.
validationBarrier := NewValidationBarrier(runtime.NumCPU()*4, r.quit)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
for {
// If there are stats, resume the statTicker.
if !r.stats.Empty() {
r.statTicker.Resume()
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
select {
// A new fully validated network update has just arrived. As a
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// result we'll modify the channel graph accordingly depending
// on the exact type of the message.
case update := <-r.networkUpdates:
// We'll set up any dependants, and wait until a free
// slot for this job opens up, this allow us to not
// have thousands of goroutines active.
validationBarrier.InitJobDependencies(update.msg)
r.wg.Add(1)
go func() {
defer r.wg.Done()
defer validationBarrier.CompleteJob()
// If this message has an existing dependency,
// then we'll wait until that has been fully
// validated before we proceed.
err := validationBarrier.WaitForDependants(
update.msg,
)
if err != nil {
if err != ErrVBarrierShuttingDown {
log.Warnf("unexpected error "+
"during validation "+
"barrier shutdown: %v",
err)
}
return
}
// Process the routing update to determine if
// this is either a new update from our PoV or
// an update to a prior vertex/edge we
// previously accepted.
err = r.processUpdate(update.msg)
update.err <- err
// If this message had any dependencies, then
// we can now signal them to continue.
validationBarrier.SignalDependants(update.msg)
if err != nil {
return
}
// Send off a new notification for the newly
// accepted update.
topChange := &TopologyChange{}
err = addToTopologyChange(
r.cfg.Graph, topChange, update.msg,
)
if err != nil {
log.Errorf("unable to update topology "+
"change notification: %v", err)
return
}
if !topChange.isEmpty() {
r.notifyTopologyChange(topChange)
}
}()
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// TODO(roasbeef): remove all unconnected vertexes
// after N blocks pass with no corresponding
// announcements.
case chainUpdate, ok := <-r.staleBlocks:
// If the channel has been closed, then this indicates
// the daemon is shutting down, so we exit ourselves.
if !ok {
return
}
// Since this block is stale, we update our best height
// to the previous block.
blockHeight := uint32(chainUpdate.Height)
atomic.StoreUint32(&r.bestHeight, blockHeight-1)
// Update the channel graph to reflect that this block
// was disconnected.
_, err := r.cfg.Graph.DisconnectBlockAtHeight(blockHeight)
if err != nil {
log.Errorf("unable to prune graph with stale "+
"block: %v", err)
continue
}
// TODO(halseth): notify client about the reorg?
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// A new block has arrived, so we can prune the channel graph
// of any channels which were closed in the block.
case chainUpdate, ok := <-r.newBlocks:
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// If the channel has been closed, then this indicates
// the daemon is shutting down, so we exit ourselves.
if !ok {
return
}
// We'll ensure that any new blocks received attach
// directly to the end of our main chain. If not, then
// we've somehow missed some blocks. We don't process
// this block as otherwise, we may miss on-chain
// events.
currentHeight := atomic.LoadUint32(&r.bestHeight)
if chainUpdate.Height != currentHeight+1 {
log.Errorf("out of order block: expecting "+
"height=%v, got height=%v", currentHeight+1,
chainUpdate.Height)
continue
}
// Once a new block arrives, we update our running
// track of the height of the chain tip.
blockHeight := uint32(chainUpdate.Height)
atomic.StoreUint32(&r.bestHeight, blockHeight)
log.Infof("Pruning channel graph using block %v (height=%v)",
chainUpdate.Hash, blockHeight)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// We're only interested in all prior outputs that have
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// been spent in the block, so collate all the
// referenced previous outpoints within each tx and
// input.
var spentOutputs []*wire.OutPoint
for _, tx := range chainUpdate.Transactions {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
for _, txIn := range tx.TxIn {
spentOutputs = append(spentOutputs,
&txIn.PreviousOutPoint)
}
}
// With the spent outputs gathered, attempt to prune
// the channel graph, also passing in the hash+height
// of the block being pruned so the prune tip can be
// updated.
chansClosed, err := r.cfg.Graph.PruneGraph(spentOutputs,
&chainUpdate.Hash, chainUpdate.Height)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil {
log.Errorf("unable to prune routing table: %v", err)
continue
}
log.Infof("Block %v (height=%v) closed %v channels",
chainUpdate.Hash, blockHeight, len(chansClosed))
if len(chansClosed) == 0 {
continue
}
// Notify all currently registered clients of the newly
// closed channels.
closeSummaries := createCloseSummaries(blockHeight, chansClosed...)
r.notifyTopologyChange(&TopologyChange{
ClosedChannels: closeSummaries,
})
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// A new notification client update has arrived. We're either
// gaining a new client, or cancelling notifications for an
// existing client.
case ntfnUpdate := <-r.ntfnClientUpdates:
clientID := ntfnUpdate.clientID
if ntfnUpdate.cancel {
r.RLock()
client, ok := r.topologyClients[ntfnUpdate.clientID]
r.RUnlock()
if ok {
r.Lock()
delete(r.topologyClients, clientID)
r.Unlock()
close(client.exit)
client.wg.Wait()
close(client.ntfnChan)
}
continue
}
r.Lock()
r.topologyClients[ntfnUpdate.clientID] = &topologyClient{
ntfnChan: ntfnUpdate.ntfnChan,
exit: make(chan struct{}),
}
r.Unlock()
// The graph prune ticker has ticked, so we'll examine the
// state of the known graph to filter out any zombie channels
// for pruning.
case <-graphPruneTicker.C:
if err := r.pruneZombieChans(); err != nil {
log.Errorf("Unable to prune zombies: %v", err)
}
// Log any stats if we've processed a non-empty number of
// channels, updates, or nodes. We'll only pause the ticker if
// the last window contained no updates to avoid resuming and
// pausing while consecutive windows contain new info.
case <-r.statTicker.Ticks():
if !r.stats.Empty() {
log.Infof(r.stats.String())
} else {
r.statTicker.Pause()
}
r.stats.Reset()
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// The router has been signalled to exit, to we exit our main
// loop so the wait group can be decremented.
case <-r.quit:
return
}
}
}
// assertNodeAnnFreshness returns a non-nil error if we have an announcement in
// the database for the passed node with a timestamp newer than the passed
// timestamp. ErrIgnored will be returned if we already have the node, and
// ErrOutdated will be returned if we have a timestamp that's after the new
// timestamp.
func (r *ChannelRouter) assertNodeAnnFreshness(node route.Vertex,
msgTimestamp time.Time) error {
// If we are not already aware of this node, it means that we don't
// know about any channel using this node. To avoid a DoS attack by
// node announcements, we will ignore such nodes. If we do know about
// this node, check that this update brings info newer than what we
// already have.
lastUpdate, exists, err := r.cfg.Graph.HasLightningNode(node)
if err != nil {
return errors.Errorf("unable to query for the "+
"existence of node: %v", err)
}
if !exists {
return newErrf(ErrIgnored, "Ignoring node announcement"+
" for node not found in channel graph (%x)",
node[:])
}
// If we've reached this point then we're aware of the vertex being
// advertised. So we now check if the new message has a new time stamp,
// if not then we won't accept the new data as it would override newer
// data.
if !lastUpdate.Before(msgTimestamp) {
return newErrf(ErrOutdated, "Ignoring outdated "+
"announcement for %x", node[:])
}
return nil
}
// processUpdate processes a new relate authenticated channel/edge, node or
// channel/edge update network update. If the update didn't affect the internal
// state of the draft due to either being out of date, invalid, or redundant,
// then error is returned.
func (r *ChannelRouter) processUpdate(msg interface{}) error {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
switch msg := msg.(type) {
case *channeldb.LightningNode:
// Before we add the node to the database, we'll check to see
// if the announcement is "fresh" or not. If it isn't, then
// we'll return an error.
err := r.assertNodeAnnFreshness(msg.PubKeyBytes, msg.LastUpdate)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil {
return err
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
if err := r.cfg.Graph.AddLightningNode(msg); err != nil {
return errors.Errorf("unable to add node %v to the "+
"graph: %v", msg.PubKeyBytes, err)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
log.Tracef("Updated vertex data for node=%x", msg.PubKeyBytes)
r.stats.incNumNodeUpdates()
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
case *channeldb.ChannelEdgeInfo:
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Prior to processing the announcement we first check if we
// already know of this channel, if so, then we can exit early.
_, _, exists, isZombie, err := r.cfg.Graph.HasChannelEdge(
msg.ChannelID,
)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil && err != channeldb.ErrGraphNoEdgesFound {
return errors.Errorf("unable to check for edge "+
"existence: %v", err)
}
if isZombie {
return newErrf(ErrIgnored, "ignoring msg for zombie "+
"chan_id=%v", msg.ChannelID)
}
if exists {
return newErrf(ErrIgnored, "ignoring msg for known "+
"chan_id=%v", msg.ChannelID)
}
// If AssumeChannelValid is present, then we are unable to
// perform any of the expensive checks below, so we'll
// short-circuit our path straight to adding the edge to our
// graph.
if r.cfg.AssumeChannelValid {
if err := r.cfg.Graph.AddChannelEdge(msg); err != nil {
return fmt.Errorf("unable to add edge: %v", err)
}
log.Tracef("New channel discovered! Link "+
"connects %x and %x with ChannelID(%v)",
msg.NodeKey1Bytes, msg.NodeKey2Bytes,
msg.ChannelID)
r.stats.incNumEdgesDiscovered()
break
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Before we can add the channel to the channel graph, we need
// to obtain the full funding outpoint that's encoded within
// the channel ID.
channelID := lnwire.NewShortChanIDFromInt(msg.ChannelID)
fundingTx, err := r.fetchFundingTx(&channelID)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil {
return errors.Errorf("unable to fetch funding tx for "+
"chan_id=%v: %v", msg.ChannelID, err)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// Recreate witness output to be sure that declared in channel
// edge bitcoin keys and channel value corresponds to the
// reality.
witnessScript, err := input.GenMultiSigScript(
msg.BitcoinKey1Bytes[:], msg.BitcoinKey2Bytes[:],
)
if err != nil {
return err
}
pkScript, err := input.WitnessScriptHash(witnessScript)
if err != nil {
return err
}
// Next we'll validate that this channel is actually well
// formed. If this check fails, then this channel either
// doesn't exist, or isn't the one that was meant to be created
// according to the passed channel proofs.
fundingPoint, err := chanvalidate.Validate(&chanvalidate.Context{
Locator: &chanvalidate.ShortChanIDChanLocator{
ID: channelID,
},
MultiSigPkScript: pkScript,
FundingTx: fundingTx,
})
if err != nil {
return err
}
// Now that we have the funding outpoint of the channel, ensure
// that it hasn't yet been spent. If so, then this channel has
// been closed so we'll ignore it.
fundingPkScript, err := input.WitnessScriptHash(witnessScript)
if err != nil {
return err
}
chanUtxo, err := r.cfg.Chain.GetUtxo(
fundingPoint, fundingPkScript, channelID.BlockHeight,
r.quit,
)
if err != nil {
return fmt.Errorf("unable to fetch utxo "+
"for chan_id=%v, chan_point=%v: %v",
msg.ChannelID, fundingPoint, err)
}
// TODO(roasbeef): this is a hack, needs to be removed
// after commitment fees are dynamic.
msg.Capacity = btcutil.Amount(chanUtxo.Value)
msg.ChannelPoint = *fundingPoint
if err := r.cfg.Graph.AddChannelEdge(msg); err != nil {
return errors.Errorf("unable to add edge: %v", err)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
log.Tracef("New channel discovered! Link "+
"connects %x and %x with ChannelPoint(%v): "+
"chan_id=%v, capacity=%v",
msg.NodeKey1Bytes, msg.NodeKey2Bytes,
fundingPoint, msg.ChannelID, msg.Capacity)
r.stats.incNumEdgesDiscovered()
// As a new edge has been added to the channel graph, we'll
// update the current UTXO filter within our active
// FilteredChainView so we are notified if/when this channel is
// closed.
filterUpdate := []channeldb.EdgePoint{
{
FundingPkScript: fundingPkScript,
OutPoint: *fundingPoint,
},
}
err = r.cfg.ChainView.UpdateFilter(
filterUpdate, atomic.LoadUint32(&r.bestHeight),
)
if err != nil {
return errors.Errorf("unable to update chain "+
"view: %v", err)
}
case *channeldb.ChannelEdgePolicy:
// We make sure to hold the mutex for this channel ID,
// such that no other goroutine is concurrently doing
// database accesses for the same channel ID.
r.channelEdgeMtx.Lock(msg.ChannelID)
defer r.channelEdgeMtx.Unlock(msg.ChannelID)
edge1Timestamp, edge2Timestamp, exists, isZombie, err :=
r.cfg.Graph.HasChannelEdge(msg.ChannelID)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
if err != nil && err != channeldb.ErrGraphNoEdgesFound {
return errors.Errorf("unable to check for edge "+
"existence: %v", err)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// If the channel is marked as a zombie in our database, and
// we consider this a stale update, then we should not apply the
// policy.
isStaleUpdate := time.Since(msg.LastUpdate) > r.cfg.ChannelPruneExpiry
if isZombie && isStaleUpdate {
return newErrf(ErrIgnored, "ignoring stale update "+
"(flags=%v|%v) for zombie chan_id=%v",
msg.MessageFlags, msg.ChannelFlags,
msg.ChannelID)
}
// If the channel doesn't exist in our database, we cannot
// apply the updated policy.
if !exists {
return newErrf(ErrIgnored, "ignoring update "+
"(flags=%v|%v) for unknown chan_id=%v",
msg.MessageFlags, msg.ChannelFlags,
msg.ChannelID)
}
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// As edges are directional edge node has a unique policy for
// the direction of the edge they control. Therefore we first
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// check if we already have the most up to date information for
// that edge. If this message has a timestamp not strictly
// newer than what we already know of we can exit early.
switch {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// A flag set of 0 indicates this is an announcement for the
// "first" node in the channel.
case msg.ChannelFlags&lnwire.ChanUpdateDirection == 0:
// Ignore outdated message.
if !edge1Timestamp.Before(msg.LastUpdate) {
return newErrf(ErrOutdated, "Ignoring "+
"outdated update (flags=%v|%v) for "+
"known chan_id=%v", msg.MessageFlags,
msg.ChannelFlags, msg.ChannelID)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// Similarly, a flag set of 1 indicates this is an announcement
// for the "second" node in the channel.
case msg.ChannelFlags&lnwire.ChanUpdateDirection == 1:
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// Ignore outdated message.
if !edge2Timestamp.Before(msg.LastUpdate) {
return newErrf(ErrOutdated, "Ignoring "+
"outdated update (flags=%v|%v) for "+
"known chan_id=%v", msg.MessageFlags,
msg.ChannelFlags, msg.ChannelID)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
}
// Now that we know this isn't a stale update, we'll apply the
// new edge policy to the proper directional edge within the
// channel graph.
if err = r.cfg.Graph.UpdateEdgePolicy(msg); err != nil {
err := errors.Errorf("unable to add channel: %v", err)
log.Error(err)
return err
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
log.Tracef("New channel update applied: %v",
newLogClosure(func() string { return spew.Sdump(msg) }))
r.stats.incNumChannelUpdates()
default:
return errors.Errorf("wrong routing update message type")
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
return nil
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// fetchFundingTx returns the funding transaction identified by the passed
// short channel ID.
//
// TODO(roasbeef): replace with call to GetBlockTransaction? (would allow to
// later use getblocktxn)
func (r *ChannelRouter) fetchFundingTx(
chanID *lnwire.ShortChannelID) (*wire.MsgTx, error) {
2018-08-30 05:05:13 +03:00
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// First fetch the block hash by the block number encoded, then use
// that hash to fetch the block itself.
blockNum := int64(chanID.BlockHeight)
blockHash, err := r.cfg.Chain.GetBlockHash(blockNum)
if err != nil {
return nil, err
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
fundingBlock, err := r.cfg.Chain.GetBlock(blockHash)
if err != nil {
return nil, err
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// As a sanity check, ensure that the advertised transaction index is
// within the bounds of the total number of transactions within a
// block.
numTxns := uint32(len(fundingBlock.Transactions))
if chanID.TxIndex > numTxns-1 {
return nil, fmt.Errorf("tx_index=#%v is out of range "+
"(max_index=%v), network_chan_id=%v", chanID.TxIndex,
numTxns-1, chanID)
2018-08-30 05:05:13 +03:00
}
return fundingBlock.Transactions[chanID.TxIndex], nil
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// routingMsg couples a routing related routing topology update to the
// error channel.
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
type routingMsg struct {
msg interface{}
err chan error
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// FindRoute attempts to query the ChannelRouter for the optimum path to a
// particular target destination to which it is able to send `amt` after
// factoring in channel capacities and cumulative fees along the route.
func (r *ChannelRouter) FindRoute(source, target route.Vertex,
amt lnwire.MilliSatoshi, restrictions *RestrictParams,
destCustomRecords record.CustomSet,
routeHints map[route.Vertex][]*channeldb.ChannelEdgePolicy,
finalExpiry uint16) (*route.Route, error) {
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
log.Debugf("Searching for path to %v, sending %v", target, amt)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
// We'll attempt to obtain a set of bandwidth hints that can help us
// eliminate certain routes early on in the path finding process.
bandwidthHints, err := generateBandwidthHints(
r.selfNode, r.cfg.QueryBandwidth,
)
if err != nil {
return nil, err
}
// We'll fetch the current block height so we can properly calculate the
// required HTLC time locks within the route.
_, currentHeight, err := r.cfg.Chain.GetBestBlock()
if err != nil {
return nil, err
}
// Now that we know the destination is reachable within the graph, we'll
// execute our path finding algorithm.
finalHtlcExpiry := currentHeight + int32(finalExpiry)
routingTx, err := newDbRoutingTx(r.cfg.Graph)
if err != nil {
return nil, err
}
defer func() {
err := routingTx.close()
if err != nil {
log.Errorf("Error closing db tx: %v", err)
}
}()
path, err := findPath(
&graphParams{
additionalEdges: routeHints,
bandwidthHints: bandwidthHints,
graph: routingTx,
},
restrictions,
&r.cfg.PathFindingConfig,
source, target, amt, finalHtlcExpiry,
)
2019-05-24 09:57:17 +03:00
if err != nil {
return nil, err
}
// Create the route with absolute time lock values.
route, err := newRoute(
source, path, uint32(currentHeight),
finalHopParams{
amt: amt,
totalAmt: amt,
cltvDelta: finalExpiry,
records: destCustomRecords,
},
)
if err != nil {
return nil, err
}
go log.Tracef("Obtained path to send %v to %x: %v",
amt, target, newLogClosure(func() string {
return spew.Sdump(route)
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}),
)
return route, nil
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// generateNewSessionKey generates a new ephemeral private key to be used for a
// payment attempt.
func generateNewSessionKey() (*btcec.PrivateKey, error) {
// Generate a new random session key to ensure that we don't trigger
// any replay.
//
// TODO(roasbeef): add more sources of randomness?
return btcec.NewPrivateKey(btcec.S256())
}
// generateSphinxPacket generates then encodes a sphinx packet which encodes
// the onion route specified by the passed layer 3 route. The blob returned
// from this function can immediately be included within an HTLC add packet to
// be sent to the first hop within the route.
func generateSphinxPacket(rt *route.Route, paymentHash []byte,
sessionKey *btcec.PrivateKey) ([]byte, *sphinx.Circuit, error) {
// Now that we know we have an actual route, we'll map the route into a
// sphinx payument path which includes per-hop paylods for each hop
// that give each node within the route the necessary information
// (fees, CLTV value, etc) to properly forward the payment.
sphinxPath, err := rt.ToSphinxPath()
if err != nil {
return nil, nil, err
}
log.Tracef("Constructed per-hop payloads for payment_hash=%x: %v",
paymentHash[:], newLogClosure(func() string {
path := make([]sphinx.OnionHop, sphinxPath.TrueRouteLength())
for i := range path {
hopCopy := sphinxPath[i]
hopCopy.NodePub.Curve = nil
path[i] = hopCopy
}
return spew.Sdump(path)
}),
)
// Next generate the onion routing packet which allows us to perform
// privacy preserving source routing across the network.
sphinxPacket, err := sphinx.NewOnionPacket(
sphinxPath, sessionKey, paymentHash,
sphinx.DeterministicPacketFiller,
)
if err != nil {
return nil, nil, err
}
// Finally, encode Sphinx packet using its wire representation to be
// included within the HTLC add packet.
var onionBlob bytes.Buffer
if err := sphinxPacket.Encode(&onionBlob); err != nil {
return nil, nil, err
}
log.Tracef("Generated sphinx packet: %v",
newLogClosure(func() string {
// We make a copy of the ephemeral key and unset the
// internal curve here in order to keep the logs from
// getting noisy.
key := *sphinxPacket.EphemeralKey
key.Curve = nil
packetCopy := *sphinxPacket
packetCopy.EphemeralKey = &key
return spew.Sdump(packetCopy)
}),
)
return onionBlob.Bytes(), &sphinx.Circuit{
SessionKey: sessionKey,
PaymentPath: sphinxPath.NodeKeys(),
}, nil
}
// LightningPayment describes a payment to be sent through the network to the
// final destination.
type LightningPayment struct {
// Target is the node in which the payment should be routed towards.
Target route.Vertex
// Amount is the value of the payment to send through the network in
// milli-satoshis.
Amount lnwire.MilliSatoshi
// FeeLimit is the maximum fee in millisatoshis that the payment should
// accept when sending it through the network. The payment will fail
// if there isn't a route with lower fees than this limit.
FeeLimit lnwire.MilliSatoshi
// CltvLimit is the maximum time lock that is allowed for attempts to
// complete this payment.
CltvLimit uint32
// PaymentHash is the r-hash value to use within the HTLC extended to
// the first hop.
PaymentHash [32]byte
// FinalCLTVDelta is the CTLV expiry delta to use for the _final_ hop
// in the route. This means that the final hop will have a CLTV delta
// of at least: currentHeight + FinalCLTVDelta.
FinalCLTVDelta uint16
// PayAttemptTimeout is a timeout value that we'll use to determine
// when we should should abandon the payment attempt after consecutive
// payment failure. This prevents us from attempting to send a payment
// indefinitely. A zero value means the payment will never time out.
//
// TODO(halseth): make wallclock time to allow resume after startup.
PayAttemptTimeout time.Duration
// RouteHints represents the different routing hints that can be used to
// assist a payment in reaching its destination successfully. These
// hints will act as intermediate hops along the route.
//
// NOTE: This is optional unless required by the payment. When providing
// multiple routes, ensure the hop hints within each route are chained
// together and sorted in forward order in order to reach the
// destination successfully.
RouteHints [][]zpay32.HopHint
// OutgoingChannelIDs is the list of channels that are allowed for the
// first hop. If nil, any channel may be used.
OutgoingChannelIDs []uint64
// LastHop is the pubkey of the last node before the final destination
// is reached. If nil, any node may be used.
LastHop *route.Vertex
// DestFeatures specifies the set of features we assume the final node
// has for pathfinding. Typically these will be taken directly from an
// invoice, but they can also be manually supplied or assumed by the
// sender. If a nil feature vector is provided, the router will try to
// fallback to the graph in order to load a feature vector for a node in
// the public graph.
DestFeatures *lnwire.FeatureVector
// PaymentAddr is the payment address specified by the receiver. This
// field should be a random 32-byte nonce presented in the receiver's
// invoice to prevent probing of the destination.
PaymentAddr *[32]byte
// PaymentRequest is an optional payment request that this payment is
// attempting to complete.
PaymentRequest []byte
// DestCustomRecords are TLV records that are to be sent to the final
// hop in the new onion payload format. If the destination does not
// understand this new onion payload format, then the payment will
// fail.
DestCustomRecords record.CustomSet
// MaxParts is the maximum number of partial payments that may be used
// to complete the full amount.
MaxParts uint32
}
// SendPayment attempts to send a payment as described within the passed
// LightningPayment. This function is blocking and will return either: when the
// payment is successful, or all candidates routes have been attempted and
// resulted in a failed payment. If the payment succeeds, then a non-nil Route
// will be returned which describes the path the successful payment traversed
// within the network to reach the destination. Additionally, the payment
// preimage will also be returned.
func (r *ChannelRouter) SendPayment(payment *LightningPayment) ([32]byte,
*route.Route, error) {
paySession, err := r.preparePayment(payment)
if err != nil {
return [32]byte{}, nil, err
}
log.Tracef("Dispatching SendPayment for lightning payment: %v",
spewPayment(payment))
// Since this is the first time this payment is being made, we pass nil
// for the existing attempt.
return r.sendPayment(
payment.Amount, payment.FeeLimit, payment.PaymentHash,
payment.PayAttemptTimeout, paySession,
)
}
// SendPaymentAsync is the non-blocking version of SendPayment. The payment
// result needs to be retrieved via the control tower.
func (r *ChannelRouter) SendPaymentAsync(payment *LightningPayment) error {
paySession, err := r.preparePayment(payment)
if err != nil {
return err
}
// Since this is the first time this payment is being made, we pass nil
// for the existing attempt.
r.wg.Add(1)
go func() {
defer r.wg.Done()
log.Tracef("Dispatching SendPayment for lightning payment: %v",
spewPayment(payment))
_, _, err := r.sendPayment(
payment.Amount, payment.FeeLimit, payment.PaymentHash,
payment.PayAttemptTimeout, paySession,
)
if err != nil {
log.Errorf("Payment with hash %x failed: %v",
payment.PaymentHash, err)
}
}()
return nil
}
// spewPayment returns a log closures that provides a spewed string
// representation of the passed payment.
func spewPayment(payment *LightningPayment) logClosure {
return newLogClosure(func() string {
// Make a copy of the payment with a nilled Curve
// before spewing.
var routeHints [][]zpay32.HopHint
for _, routeHint := range payment.RouteHints {
var hopHints []zpay32.HopHint
for _, hopHint := range routeHint {
h := hopHint.Copy()
h.NodeID.Curve = nil
hopHints = append(hopHints, h)
}
routeHints = append(routeHints, hopHints)
}
p := *payment
p.RouteHints = routeHints
return spew.Sdump(p)
})
}
// preparePayment creates the payment session and registers the payment with the
// control tower.
func (r *ChannelRouter) preparePayment(payment *LightningPayment) (
PaymentSession, error) {
2018-01-30 11:03:29 +03:00
// Before starting the HTLC routing attempt, we'll create a fresh
// payment session which will report our errors back to mission
// control.
paySession, err := r.cfg.SessionSource.NewPaymentSession(payment)
2018-01-30 11:03:29 +03:00
if err != nil {
return nil, err
2018-01-30 11:03:29 +03:00
}
// Record this payment hash with the ControlTower, ensuring it is not
// already in-flight.
//
// TODO(roasbeef): store records as part of creation info?
info := &channeldb.PaymentCreationInfo{
PaymentHash: payment.PaymentHash,
Value: payment.Amount,
2020-03-05 15:54:03 +03:00
CreationTime: r.cfg.Clock.Now(),
PaymentRequest: payment.PaymentRequest,
}
err = r.cfg.Control.InitPayment(payment.PaymentHash, info)
if err != nil {
return nil, err
}
return paySession, nil
2018-01-30 11:03:29 +03:00
}
// SendToRoute attempts to send a payment with the given hash through the
// provided route. This function is blocking and will return the attempt
// information as it is stored in the database. For a successful htlc, this
// information will contain the preimage. If an error occurs after the attempt
// was initiated, both return values will be non-nil.
func (r *ChannelRouter) SendToRoute(hash lntypes.Hash, rt *route.Route) (
*channeldb.HTLCAttempt, error) {
2018-01-30 11:03:29 +03:00
// Calculate amount paid to receiver.
amt := rt.ReceiverAmt()
// If this is meant as a MP payment shard, we set the amount
// for the creating info to the total amount of the payment.
finalHop := rt.Hops[len(rt.Hops)-1]
mpp := finalHop.MPP
if mpp != nil {
amt = mpp.TotalMsat()
}
// Record this payment hash with the ControlTower, ensuring it is not
// already in-flight.
info := &channeldb.PaymentCreationInfo{
PaymentHash: hash,
Value: amt,
2020-03-05 15:54:03 +03:00
CreationTime: r.cfg.Clock.Now(),
PaymentRequest: nil,
}
err := r.cfg.Control.InitPayment(hash, info)
switch {
// If this is an MPP attempt and the hash is already registered with
// the database, we can go on to launch the shard.
case err == channeldb.ErrPaymentInFlight && mpp != nil:
// Any other error is not tolerated.
case err != nil:
return nil, err
}
log.Tracef("Dispatching SendToRoute for hash %v: %v",
hash, newLogClosure(func() string {
return spew.Sdump(rt)
}),
)
// Launch a shard along the given route.
sh := &shardHandler{
router: r,
paymentHash: hash,
}
var shardError error
attempt, outcome, err := sh.launchShard(rt)
// With SendToRoute, it can happen that the route exceeds protocol
// constraints. Mark the payment as failed with an internal error.
if err == route.ErrMaxRouteHopsExceeded ||
err == sphinx.ErrMaxRoutingInfoSizeExceeded {
log.Debugf("Invalid route provided for payment %x: %v",
hash, err)
controlErr := r.cfg.Control.Fail(
hash, channeldb.FailureReasonError,
)
if controlErr != nil {
return nil, controlErr
}
}
// In any case, don't continue if there is an error.
if err != nil {
return nil, err
}
var htlcAttempt *channeldb.HTLCAttempt
switch {
// Failed to launch shard.
case outcome.err != nil:
shardError = outcome.err
htlcAttempt = outcome.attempt
// Shard successfully launched, wait for the result to be available.
default:
result, err := sh.collectResult(attempt)
if err != nil {
return nil, err
}
// We got a successful result.
if result.err == nil {
return result.attempt, nil
}
// The shard failed, break switch to handle it.
shardError = result.err
htlcAttempt = result.attempt
}
// Since for SendToRoute we won't retry in case the shard fails, we'll
// mark the payment failed with the control tower immediately. Process
// the error to check if it maps into a terminal error code, if not use
// a generic NO_ROUTE error.
reason := r.processSendError(
attempt.AttemptID, &attempt.Route, shardError,
)
if reason == nil {
r := channeldb.FailureReasonNoRoute
reason = &r
}
err = r.cfg.Control.Fail(hash, *reason)
if err != nil {
return nil, err
}
return htlcAttempt, shardError
2018-01-30 11:03:29 +03:00
}
// sendPayment attempts to send a payment to the passed payment hash. This
// function is blocking and will return either: when the payment is successful,
// or all candidates routes have been attempted and resulted in a failed
// payment. If the payment succeeds, then a non-nil Route will be returned
// which describes the path the successful payment traversed within the network
// to reach the destination. Additionally, the payment preimage will also be
// returned.
//
// The existing attempt argument should be set to nil if this is a payment that
// haven't had any payment attempt sent to the switch yet. If it has had an
// attempt already, it should be passed such that the result can be retrieved.
//
// This method relies on the ControlTower's internal payment state machine to
// carry out its execution. After restarts it is safe, and assumed, that the
// router will call this method for every payment still in-flight according to
// the ControlTower.
func (r *ChannelRouter) sendPayment(
totalAmt, feeLimit lnwire.MilliSatoshi, paymentHash lntypes.Hash,
timeout time.Duration,
paySession PaymentSession) ([32]byte, *route.Route, error) {
// We'll also fetch the current block height so we can properly
// calculate the required HTLC time locks within the route.
_, currentHeight, err := r.cfg.Chain.GetBestBlock()
if err != nil {
2018-01-30 11:03:29 +03:00
return [32]byte{}, nil, err
}
// Now set up a paymentLifecycle struct with these params, such that we
// can resume the payment from the current state.
p := &paymentLifecycle{
router: r,
totalAmount: totalAmt,
feeLimit: feeLimit,
paymentHash: paymentHash,
paySession: paySession,
currentHeight: currentHeight,
}
// If a timeout is specified, create a timeout channel. If no timeout is
// specified, the channel is left nil and will never abort the payment
// loop.
if timeout != 0 {
p.timeoutChan = time.After(timeout)
}
return p.resumePayment()
}
// tryApplyChannelUpdate tries to apply a channel update present in the failure
// message if any.
func (r *ChannelRouter) tryApplyChannelUpdate(rt *route.Route,
errorSourceIdx int, failure lnwire.FailureMessage) error {
// It makes no sense to apply our own channel updates.
if errorSourceIdx == 0 {
log.Errorf("Channel update of ourselves received")
return nil
}
// Extract channel update if the error contains one.
update := r.extractChannelUpdate(failure)
if update == nil {
return nil
}
// Parse pubkey to allow validation of the channel update. This should
// always succeed, otherwise there is something wrong in our
// implementation. Therefore return an error.
errVertex := rt.Hops[errorSourceIdx-1].PubKeyBytes
errSource, err := btcec.ParsePubKey(
errVertex[:], btcec.S256(),
)
if err != nil {
log.Errorf("Cannot parse pubkey: idx=%v, pubkey=%v",
errorSourceIdx, errVertex)
return err
}
// Apply channel update.
if !r.applyChannelUpdate(update, errSource) {
log.Debugf("Invalid channel update received: node=%v",
errVertex)
}
return nil
}
// processSendError analyzes the error for the payment attempt received from the
// switch and updates mission control and/or channel policies. Depending on the
// error type, this error is either the final outcome of the payment or we need
// to continue with an alternative route. This is indicated by the boolean
// return value.
func (r *ChannelRouter) processSendError(paymentID uint64, rt *route.Route,
sendErr error) *channeldb.FailureReason {
internalErrorReason := channeldb.FailureReasonError
reportFail := func(srcIdx *int,
msg lnwire.FailureMessage) *channeldb.FailureReason {
2019-06-26 14:00:35 +03:00
// Report outcome to mission control.
reason, err := r.cfg.MissionControl.ReportPaymentFail(
2019-06-26 14:00:35 +03:00
paymentID, rt, srcIdx, msg,
)
if err != nil {
log.Errorf("Error reporting payment result to mc: %v",
err)
return &internalErrorReason
2019-06-26 14:00:35 +03:00
}
return reason
2019-06-26 14:00:35 +03:00
}
if sendErr == htlcswitch.ErrUnreadableFailureMessage {
log.Tracef("Unreadable failure when sending htlc")
2019-06-26 14:00:35 +03:00
return reportFail(nil, nil)
}
// If the error is a ClearTextError, we have received a valid wire
// failure message, either from our own outgoing link or from a node
// down the route. If the error is not related to the propagation of
// our payment, we can stop trying because an internal error has
// occurred.
rtErr, ok := sendErr.(htlcswitch.ClearTextError)
if !ok {
return &internalErrorReason
}
// failureSourceIdx is the index of the node that the failure occurred
// at. If the ClearTextError received is not a ForwardingError the
// payment error occurred at our node, so we leave this value as 0
// to indicate that the failure occurred locally. If the error is a
// ForwardingError, it did not originate at our node, so we set
// failureSourceIdx to the index of the node where the failure occurred.
failureSourceIdx := 0
source, ok := rtErr.(*htlcswitch.ForwardingError)
if ok {
failureSourceIdx = source.FailureSourceIdx
}
// Extract the wire failure and apply channel update if it contains one.
// If we received an unknown failure message from a node along the
// route, the failure message will be nil.
failureMessage := rtErr.WireMessage()
if failureMessage != nil {
err := r.tryApplyChannelUpdate(
rt, failureSourceIdx, failureMessage,
)
if err != nil {
return &internalErrorReason
}
}
log.Tracef("Node=%v reported failure when sending htlc",
failureSourceIdx)
2019-06-26 14:00:35 +03:00
return reportFail(&failureSourceIdx, failureMessage)
}
// extractChannelUpdate examines the error and extracts the channel update.
func (r *ChannelRouter) extractChannelUpdate(
failure lnwire.FailureMessage) *lnwire.ChannelUpdate {
var update *lnwire.ChannelUpdate
switch onionErr := failure.(type) {
case *lnwire.FailExpiryTooSoon:
update = &onionErr.Update
case *lnwire.FailAmountBelowMinimum:
update = &onionErr.Update
case *lnwire.FailFeeInsufficient:
update = &onionErr.Update
case *lnwire.FailIncorrectCltvExpiry:
update = &onionErr.Update
case *lnwire.FailChannelDisabled:
update = &onionErr.Update
case *lnwire.FailTemporaryChannelFailure:
update = onionErr.Update
}
return update
}
// applyChannelUpdate validates a channel update and if valid, applies it to the
// database. It returns a bool indicating whether the updates was successful.
func (r *ChannelRouter) applyChannelUpdate(msg *lnwire.ChannelUpdate,
pubKey *btcec.PublicKey) bool {
ch, _, _, err := r.GetChannelByID(msg.ShortChannelID)
if err != nil {
log.Errorf("Unable to retrieve channel by id: %v", err)
return false
}
if err := ValidateChannelUpdateAnn(pubKey, ch.Capacity, msg); err != nil {
log.Errorf("Unable to validate channel update: %v", err)
return false
}
err = r.UpdateEdge(&channeldb.ChannelEdgePolicy{
SigBytes: msg.Signature.ToSignatureBytes(),
ChannelID: msg.ShortChannelID.ToUint64(),
LastUpdate: time.Unix(int64(msg.Timestamp), 0),
MessageFlags: msg.MessageFlags,
ChannelFlags: msg.ChannelFlags,
TimeLockDelta: msg.TimeLockDelta,
MinHTLC: msg.HtlcMinimumMsat,
MaxHTLC: msg.HtlcMaximumMsat,
FeeBaseMSat: lnwire.MilliSatoshi(msg.BaseFee),
FeeProportionalMillionths: lnwire.MilliSatoshi(msg.FeeRate),
})
if err != nil && !IsError(err, ErrIgnored, ErrOutdated) {
log.Errorf("Unable to apply channel update: %v", err)
return false
}
return true
routing: rewrite package to conform to BOLT07 and factor in fees+timelocks This commit overhauls the routing package significantly to simplify the code, conform to the rest of the coding style within the package, and observe the new authenticated gossiping scheme outlined in BOLT07. As a major step towards a more realistic path finding algorithm, fees are properly calculated and observed during path finding. If a path has sufficient capacity _before_ fees are applied, but afterwards the finalized route would exceed the capacity of a single link, the route is marked as invalid. Currently a naive weighting algorithm is used which only factors in the time-lock delta at each hop, thereby optimizing for the lowest time lock. Fee calculation also isn’t finalized since we aren’t yet using milli-satoshi throughout the daemon. The final TODO item within the PR is to properly perform a multi-path search and rank the results based on a summation heuristic rather than just return the first (out of many) route found. On the server side, once nodes are initially connected to the daemon, our routing table will be synced with the peer’s using a naive “just send everything scheme” to hold us over until I spec out some a efficient graph reconciliation protocol. Additionally, the routing table is now pruned by the channel router itself once new blocks arrive rather than depending on peers to tell us when a channel flaps or is closed. Finally, the validation of peer announcements aren’t yet fully implemented as they’ll be implemented within the pending discovery package that was blocking on the completion of this package. Most off the routing message processing will be moved out of this package and into the discovery package where full validation will be carried out.
2016-12-27 08:20:26 +03:00
}
// AddNode is used to add information about a node to the router database. If
// the node with this pubkey is not present in an existing channel, it will
// be ignored.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) AddNode(node *channeldb.LightningNode) error {
rMsg := &routingMsg{
msg: node,
err: make(chan error, 1),
}
select {
case r.networkUpdates <- rMsg:
select {
case err := <-rMsg.err:
return err
case <-r.quit:
return ErrRouterShuttingDown
}
case <-r.quit:
return ErrRouterShuttingDown
}
}
// AddEdge is used to add edge/channel to the topology of the router, after all
// information about channel will be gathered this edge/channel might be used
// in construction of payment path.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) AddEdge(edge *channeldb.ChannelEdgeInfo) error {
rMsg := &routingMsg{
msg: edge,
err: make(chan error, 1),
}
select {
case r.networkUpdates <- rMsg:
select {
case err := <-rMsg.err:
return err
case <-r.quit:
return ErrRouterShuttingDown
}
case <-r.quit:
return ErrRouterShuttingDown
}
}
// UpdateEdge is used to update edge information, without this message edge
// considered as not fully constructed.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) UpdateEdge(update *channeldb.ChannelEdgePolicy) error {
rMsg := &routingMsg{
msg: update,
err: make(chan error, 1),
}
select {
case r.networkUpdates <- rMsg:
select {
case err := <-rMsg.err:
return err
case <-r.quit:
return ErrRouterShuttingDown
}
case <-r.quit:
return ErrRouterShuttingDown
}
}
// CurrentBlockHeight returns the block height from POV of the router subsystem.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) CurrentBlockHeight() (uint32, error) {
_, height, err := r.cfg.Chain.GetBestBlock()
return uint32(height), err
}
// GetChannelByID return the channel by the channel id.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) GetChannelByID(chanID lnwire.ShortChannelID) (
*channeldb.ChannelEdgeInfo,
*channeldb.ChannelEdgePolicy,
*channeldb.ChannelEdgePolicy, error) {
return r.cfg.Graph.FetchChannelEdgesByID(chanID.ToUint64())
}
// FetchLightningNode attempts to look up a target node by its identity public
// key. channeldb.ErrGraphNodeNotFound is returned if the node doesn't exist
// within the graph.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) FetchLightningNode(node route.Vertex) (*channeldb.LightningNode, error) {
return r.cfg.Graph.FetchLightningNode(nil, node)
}
// ForEachNode is used to iterate over every node in router topology.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) ForEachNode(cb func(*channeldb.LightningNode) error) error {
return r.cfg.Graph.ForEachNode(nil, func(_ kvdb.ReadTx, n *channeldb.LightningNode) error {
return cb(n)
})
}
// ForAllOutgoingChannels is used to iterate over all outgoing channels owned by
// the router.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) ForAllOutgoingChannels(cb func(*channeldb.ChannelEdgeInfo,
*channeldb.ChannelEdgePolicy) error) error {
return r.selfNode.ForEachChannel(nil, func(_ kvdb.ReadTx, c *channeldb.ChannelEdgeInfo,
e, _ *channeldb.ChannelEdgePolicy) error {
if e == nil {
return fmt.Errorf("channel from self node has no policy")
}
return cb(c, e)
})
}
// ForEachChannel is used to iterate over every known edge (channel) within our
// view of the channel graph.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) ForEachChannel(cb func(chanInfo *channeldb.ChannelEdgeInfo,
e1, e2 *channeldb.ChannelEdgePolicy) error) error {
return r.cfg.Graph.ForEachChannel(cb)
}
// AddProof updates the channel edge info with proof which is needed to
// properly announce the edge to the rest of the network.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) AddProof(chanID lnwire.ShortChannelID,
proof *channeldb.ChannelAuthProof) error {
info, _, _, err := r.cfg.Graph.FetchChannelEdgesByID(chanID.ToUint64())
if err != nil {
return err
}
info.AuthProof = proof
return r.cfg.Graph.UpdateChannelEdge(info)
}
// IsStaleNode returns true if the graph source has a node announcement for the
// target node with a more recent timestamp.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) IsStaleNode(node route.Vertex, timestamp time.Time) bool {
// If our attempt to assert that the node announcement is fresh fails,
// then we know that this is actually a stale announcement.
return r.assertNodeAnnFreshness(node, timestamp) != nil
}
// IsPublicNode determines whether the given vertex is seen as a public node in
// the graph from the graph's source node's point of view.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) IsPublicNode(node route.Vertex) (bool, error) {
return r.cfg.Graph.IsPublicNode(node)
}
// IsKnownEdge returns true if the graph source already knows of the passed
// channel ID either as a live or zombie edge.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) IsKnownEdge(chanID lnwire.ShortChannelID) bool {
_, _, exists, isZombie, _ := r.cfg.Graph.HasChannelEdge(chanID.ToUint64())
return exists || isZombie
}
// IsStaleEdgePolicy returns true if the graph soruce has a channel edge for
// the passed channel ID (and flags) that have a more recent timestamp.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) IsStaleEdgePolicy(chanID lnwire.ShortChannelID,
timestamp time.Time, flags lnwire.ChanUpdateChanFlags) bool {
edge1Timestamp, edge2Timestamp, exists, isZombie, err :=
r.cfg.Graph.HasChannelEdge(chanID.ToUint64())
if err != nil {
return false
}
// If we know of the edge as a zombie, then we'll make some additional
// checks to determine if the new policy is fresh.
if isZombie {
// When running with AssumeChannelValid, we also prune channels
// if both of their edges are disabled. We'll mark the new
// policy as stale if it remains disabled.
if r.cfg.AssumeChannelValid {
isDisabled := flags&lnwire.ChanUpdateDisabled ==
lnwire.ChanUpdateDisabled
if isDisabled {
return true
}
}
// Otherwise, we'll fall back to our usual ChannelPruneExpiry.
return time.Since(timestamp) > r.cfg.ChannelPruneExpiry
}
// If we don't know of the edge, then it means it's fresh (thus not
// stale).
if !exists {
return false
}
// As edges are directional edge node has a unique policy for the
// direction of the edge they control. Therefore we first check if we
// already have the most up to date information for that edge. If so,
// then we can exit early.
switch {
// A flag set of 0 indicates this is an announcement for the "first"
// node in the channel.
case flags&lnwire.ChanUpdateDirection == 0:
return !edge1Timestamp.Before(timestamp)
// Similarly, a flag set of 1 indicates this is an announcement for the
// "second" node in the channel.
case flags&lnwire.ChanUpdateDirection == 1:
return !edge2Timestamp.Before(timestamp)
}
return false
}
// MarkEdgeLive clears an edge from our zombie index, deeming it as live.
//
// NOTE: This method is part of the ChannelGraphSource interface.
func (r *ChannelRouter) MarkEdgeLive(chanID lnwire.ShortChannelID) error {
return r.cfg.Graph.MarkEdgeLive(chanID.ToUint64())
}
2019-06-24 10:08:04 +03:00
// generateBandwidthHints is a helper function that's utilized the main
// findPath function in order to obtain hints from the lower layer w.r.t to the
// available bandwidth of edges on the network. Currently, we'll only obtain
// bandwidth hints for the edges we directly have open ourselves. Obtaining
// these hints allows us to reduce the number of extraneous attempts as we can
// skip channels that are inactive, or just don't have enough bandwidth to
// carry the payment.
func generateBandwidthHints(sourceNode *channeldb.LightningNode,
queryBandwidth func(*channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi) (map[uint64]lnwire.MilliSatoshi, error) {
// First, we'll collect the set of outbound edges from the target
// source node.
var localChans []*channeldb.ChannelEdgeInfo
err := sourceNode.ForEachChannel(nil, func(tx kvdb.ReadTx,
2019-06-24 10:08:04 +03:00
edgeInfo *channeldb.ChannelEdgeInfo,
_, _ *channeldb.ChannelEdgePolicy) error {
localChans = append(localChans, edgeInfo)
return nil
})
if err != nil {
return nil, err
}
// Now that we have all of our outbound edges, we'll populate the set
// of bandwidth hints, querying the lower switch layer for the most up
// to date values.
bandwidthHints := make(map[uint64]lnwire.MilliSatoshi)
for _, localChan := range localChans {
bandwidthHints[localChan.ChannelID] = queryBandwidth(localChan)
}
return bandwidthHints, nil
}
// ErrNoChannel is returned when a route cannot be built because there are no
// channels that satisfy all requirements.
type ErrNoChannel struct {
position int
fromNode route.Vertex
}
// Error returns a human readable string describing the error.
func (e ErrNoChannel) Error() string {
return fmt.Sprintf("no matching outgoing channel available for "+
"node %v (%v)", e.position, e.fromNode)
}
// BuildRoute returns a fully specified route based on a list of pubkeys. If
// amount is nil, the minimum routable amount is used. To force a specific
// outgoing channel, use the outgoingChan parameter.
func (r *ChannelRouter) BuildRoute(amt *lnwire.MilliSatoshi,
hops []route.Vertex, outgoingChan *uint64,
finalCltvDelta int32) (*route.Route, error) {
log.Tracef("BuildRoute called: hopsCount=%v, amt=%v",
len(hops), amt)
var outgoingChans map[uint64]struct{}
if outgoingChan != nil {
outgoingChans = map[uint64]struct{}{
*outgoingChan: {},
}
}
// If no amount is specified, we need to build a route for the minimum
// amount that this route can carry.
useMinAmt := amt == nil
// We'll attempt to obtain a set of bandwidth hints that helps us select
// the best outgoing channel to use in case no outgoing channel is set.
bandwidthHints, err := generateBandwidthHints(
r.selfNode, r.cfg.QueryBandwidth,
)
if err != nil {
return nil, err
}
2020-01-27 14:33:53 +03:00
// Fetch the current block height outside the routing transaction, to
// prevent the rpc call blocking the database.
_, height, err := r.cfg.Chain.GetBestBlock()
if err != nil {
return nil, err
}
// Allocate a list that will contain the unified policies for this
// route.
edges := make([]*unifiedPolicy, len(hops))
var runningAmt lnwire.MilliSatoshi
if useMinAmt {
// For minimum amount routes, aim to deliver at least 1 msat to
// the destination. There are nodes in the wild that have a
// min_htlc channel policy of zero, which could lead to a zero
// amount payment being made.
runningAmt = 1
} else {
// If an amount is specified, we need to build a route that
// delivers exactly this amount to the final destination.
runningAmt = *amt
}
2020-01-27 14:33:53 +03:00
// Open a transaction to execute the graph queries in.
routingTx, err := newDbRoutingTx(r.cfg.Graph)
if err != nil {
return nil, err
}
defer func() {
err := routingTx.close()
if err != nil {
log.Errorf("Error closing db tx: %v", err)
}
}()
// Traverse hops backwards to accumulate fees in the running amounts.
source := r.selfNode.PubKeyBytes
for i := len(hops) - 1; i >= 0; i-- {
toNode := hops[i]
var fromNode route.Vertex
if i == 0 {
fromNode = source
} else {
fromNode = hops[i-1]
}
localChan := i == 0
// Build unified policies for this hop based on the channels
// known in the graph.
u := newUnifiedPolicies(source, toNode, outgoingChans)
2020-01-27 14:33:53 +03:00
err := u.addGraphPolicies(routingTx)
if err != nil {
return nil, err
}
// Exit if there are no channels.
unifiedPolicy, ok := u.policies[fromNode]
if !ok {
return nil, ErrNoChannel{
fromNode: fromNode,
position: i,
}
}
// If using min amt, increase amt if needed.
if useMinAmt {
min := unifiedPolicy.minAmt()
if min > runningAmt {
runningAmt = min
}
}
// Get a forwarding policy for the specific amount that we want
// to forward.
policy := unifiedPolicy.getPolicy(runningAmt, bandwidthHints)
if policy == nil {
return nil, ErrNoChannel{
fromNode: fromNode,
position: i,
}
}
// Add fee for this hop.
if !localChan {
runningAmt += policy.ComputeFee(runningAmt)
}
log.Tracef("Select channel %v at position %v", policy.ChannelID, i)
edges[i] = unifiedPolicy
}
// Now that we arrived at the start of the route and found out the route
// total amount, we make a forward pass. Because the amount may have
// been increased in the backward pass, fees need to be recalculated and
// amount ranges re-checked.
var pathEdges []*channeldb.ChannelEdgePolicy
receiverAmt := runningAmt
for i, edge := range edges {
policy := edge.getPolicy(receiverAmt, bandwidthHints)
if policy == nil {
return nil, ErrNoChannel{
fromNode: hops[i-1],
position: i,
}
}
if i > 0 {
// Decrease the amount to send while going forward.
receiverAmt -= policy.ComputeFeeFromIncoming(
receiverAmt,
)
}
pathEdges = append(pathEdges, policy)
}
// Build and return the final route.
return newRoute(
source, pathEdges, uint32(height),
finalHopParams{
amt: receiverAmt,
totalAmt: receiverAmt,
cltvDelta: uint16(finalCltvDelta),
records: nil,
},
)
}