lnd.xprv/lnwallet/fee_estimator.go

414 lines
13 KiB
Go
Raw Normal View History

package lnwallet
import (
2017-11-10 03:30:20 +03:00
"encoding/json"
"github.com/btcsuite/btcd/blockchain"
"github.com/btcsuite/btcd/rpcclient"
"github.com/btcsuite/btcutil"
)
const (
// FeePerKwFloor is the lowest fee rate in sat/kw that we should use for
// determining transaction fees.
FeePerKwFloor SatPerKWeight = 253
)
// SatPerKVByte represents a fee rate in sat/kb.
type SatPerKVByte btcutil.Amount
// FeeForVSize calculates the fee resulting from this fee rate and the given
// vsize in vbytes.
func (s SatPerKVByte) FeeForVSize(vbytes int64) btcutil.Amount {
return btcutil.Amount(s) * btcutil.Amount(vbytes) / 1000
}
// FeePerKWeight converts the current fee rate from sat/kb to sat/kw.
func (s SatPerKVByte) FeePerKWeight() SatPerKWeight {
return SatPerKWeight(s / blockchain.WitnessScaleFactor)
}
// SatPerKWeight represents a fee rate in sat/kw.
type SatPerKWeight btcutil.Amount
// FeeForWeight calculates the fee resulting from this fee rate and the given
// weight in weight units (wu).
func (s SatPerKWeight) FeeForWeight(wu int64) btcutil.Amount {
// The resulting fee is rounded down, as specified in BOLT#03.
return btcutil.Amount(s) * btcutil.Amount(wu) / 1000
}
// FeePerKVByte converts the current fee rate from sat/kw to sat/kb.
func (s SatPerKWeight) FeePerKVByte() SatPerKVByte {
return SatPerKVByte(s * blockchain.WitnessScaleFactor)
}
// FeeEstimator provides the ability to estimate on-chain transaction fees for
// various combinations of transaction sizes and desired confirmation time
// (measured by number of blocks).
type FeeEstimator interface {
// EstimateFeePerKW takes in a target for the number of blocks until an
// initial confirmation and returns the estimated fee expressed in
// sat/kw.
EstimateFeePerKW(numBlocks uint32) (SatPerKWeight, error)
// Start signals the FeeEstimator to start any processes or goroutines
// it needs to perform its duty.
Start() error
// Stop stops any spawned goroutines and cleans up the resources used
// by the fee estimator.
Stop() error
}
// StaticFeeEstimator will return a static value for all fee calculation
// requests. It is designed to be replaced by a proper fee calculation
// implementation.
type StaticFeeEstimator struct {
// FeePerKW is the static fee rate in satoshis-per-vbyte that will be
// returned by this fee estimator.
FeePerKW SatPerKWeight
}
// EstimateFeePerKW will return a static value for fee calculations.
//
// NOTE: This method is part of the FeeEstimator interface.
func (e StaticFeeEstimator) EstimateFeePerKW(numBlocks uint32) (SatPerKWeight, error) {
return e.FeePerKW, nil
}
// Start signals the FeeEstimator to start any processes or goroutines
// it needs to perform its duty.
//
// NOTE: This method is part of the FeeEstimator interface.
func (e StaticFeeEstimator) Start() error {
return nil
}
// Stop stops any spawned goroutines and cleans up the resources used
// by the fee estimator.
//
// NOTE: This method is part of the FeeEstimator interface.
func (e StaticFeeEstimator) Stop() error {
return nil
}
// A compile-time assertion to ensure that StaticFeeEstimator implements the
// FeeEstimator interface.
var _ FeeEstimator = (*StaticFeeEstimator)(nil)
// BtcdFeeEstimator is an implementation of the FeeEstimator interface backed
// by the RPC interface of an active btcd node. This implementation will proxy
// any fee estimation requests to btcd's RPC interface.
type BtcdFeeEstimator struct {
// fallbackFeePerKW is the fall back fee rate in sat/kw that is returned
// if the fee estimator does not yet have enough data to actually
// produce fee estimates.
fallbackFeePerKW SatPerKWeight
// minFeePerKW is the minimum fee, in sat/kw, that we should enforce.
// This will be used as the default fee rate for a transaction when the
// estimated fee rate is too low to allow the transaction to propagate
// through the network.
minFeePerKW SatPerKWeight
btcdConn *rpcclient.Client
}
// NewBtcdFeeEstimator creates a new BtcdFeeEstimator given a fully populated
// rpc config that is able to successfully connect and authenticate with the
// btcd node, and also a fall back fee rate. The fallback fee rate is used in
// the occasion that the estimator has insufficient data, or returns zero for a
// fee estimate.
func NewBtcdFeeEstimator(rpcConfig rpcclient.ConnConfig,
fallBackFeeRate SatPerKWeight) (*BtcdFeeEstimator, error) {
rpcConfig.DisableConnectOnNew = true
rpcConfig.DisableAutoReconnect = false
chainConn, err := rpcclient.New(&rpcConfig, nil)
if err != nil {
return nil, err
}
return &BtcdFeeEstimator{
fallbackFeePerKW: fallBackFeeRate,
btcdConn: chainConn,
}, nil
}
// Start signals the FeeEstimator to start any processes or goroutines
// it needs to perform its duty.
//
// NOTE: This method is part of the FeeEstimator interface.
func (b *BtcdFeeEstimator) Start() error {
if err := b.btcdConn.Connect(20); err != nil {
return err
}
// Once the connection to the backend node has been established, we'll
// query it for its minimum relay fee.
info, err := b.btcdConn.GetInfo()
if err != nil {
return err
}
relayFee, err := btcutil.NewAmount(info.RelayFee)
if err != nil {
return err
}
// The fee rate is expressed in sat/kb, so we'll manually convert it to
// our desired sat/kw rate.
minRelayFeePerKw := SatPerKVByte(relayFee).FeePerKWeight()
// By default, we'll use the backend node's minimum relay fee as the
// minimum fee rate we'll propose for transacations. However, if this
// happens to be lower than our fee floor, we'll enforce that instead.
b.minFeePerKW = minRelayFeePerKw
if b.minFeePerKW < FeePerKwFloor {
b.minFeePerKW = FeePerKwFloor
}
walletLog.Debugf("Using minimum fee rate of %v sat/kw",
int64(b.minFeePerKW))
return nil
}
// Stop stops any spawned goroutines and cleans up the resources used
// by the fee estimator.
//
// NOTE: This method is part of the FeeEstimator interface.
func (b *BtcdFeeEstimator) Stop() error {
b.btcdConn.Shutdown()
return nil
}
// EstimateFeePerKW takes in a target for the number of blocks until an initial
// confirmation and returns the estimated fee expressed in sat/kw.
//
// NOTE: This method is part of the FeeEstimator interface.
func (b *BtcdFeeEstimator) EstimateFeePerKW(numBlocks uint32) (SatPerKWeight, error) {
feeEstimate, err := b.fetchEstimate(numBlocks)
switch {
// If the estimator doesn't have enough data, or returns an error, then
// to return a proper value, then we'll return the default fall back
// fee rate.
case err != nil:
walletLog.Errorf("unable to query estimator: %v", err)
fallthrough
case feeEstimate == 0:
return b.fallbackFeePerKW, nil
}
return feeEstimate, nil
}
2018-04-18 05:03:27 +03:00
// fetchEstimate returns a fee estimate for a transaction to be confirmed in
// confTarget blocks. The estimate is returned in sat/kw.
func (b *BtcdFeeEstimator) fetchEstimate(confTarget uint32) (SatPerKWeight, error) {
// First, we'll fetch the estimate for our confirmation target.
btcPerKB, err := b.btcdConn.EstimateFee(int64(confTarget))
if err != nil {
return 0, err
}
// Next, we'll convert the returned value to satoshis, as it's
// currently returned in BTC.
satPerKB, err := btcutil.NewAmount(btcPerKB)
if err != nil {
return 0, err
}
// Since we use fee rates in sat/kw internally, we'll convert the
// estimated fee rate from its sat/kb representation to sat/kw.
satPerKw := SatPerKVByte(satPerKB).FeePerKWeight()
// Finally, we'll enforce our fee floor.
if satPerKw < b.minFeePerKW {
walletLog.Debugf("Estimated fee rate of %v sat/kw is too low, "+
"using fee floor of %v sat/kw instead", b.minFeePerKW)
satPerKw = b.minFeePerKW
}
walletLog.Debugf("Returning %v sat/kw for conf target of %v",
int64(satPerKw), confTarget)
return satPerKw, nil
}
// A compile-time assertion to ensure that BtcdFeeEstimator implements the
// FeeEstimator interface.
var _ FeeEstimator = (*BtcdFeeEstimator)(nil)
2017-11-10 03:30:20 +03:00
// BitcoindFeeEstimator is an implementation of the FeeEstimator interface
// backed by the RPC interface of an active bitcoind node. This implementation
// will proxy any fee estimation requests to bitcoind's RPC interface.
2017-11-10 03:30:20 +03:00
type BitcoindFeeEstimator struct {
// fallbackFeePerKW is the fallback fee rate in sat/kw that is returned
// if the fee estimator does not yet have enough data to actually
// produce fee estimates.
fallbackFeePerKW SatPerKWeight
2017-11-10 03:30:20 +03:00
// minFeePerKW is the minimum fee, in sat/kw, that we should enforce.
// This will be used as the default fee rate for a transaction when the
// estimated fee rate is too low to allow the transaction to propagate
// through the network.
minFeePerKW SatPerKWeight
2017-11-10 03:30:20 +03:00
bitcoindConn *rpcclient.Client
}
// NewBitcoindFeeEstimator creates a new BitcoindFeeEstimator given a fully
// populated rpc config that is able to successfully connect and authenticate
// with the bitcoind node, and also a fall back fee rate. The fallback fee rate
// is used in the occasion that the estimator has insufficient data, or returns
// zero for a fee estimate.
func NewBitcoindFeeEstimator(rpcConfig rpcclient.ConnConfig,
fallBackFeeRate SatPerKWeight) (*BitcoindFeeEstimator, error) {
2017-11-10 03:30:20 +03:00
rpcConfig.DisableConnectOnNew = true
rpcConfig.DisableAutoReconnect = false
rpcConfig.DisableTLS = true
rpcConfig.HTTPPostMode = true
chainConn, err := rpcclient.New(&rpcConfig, nil)
if err != nil {
return nil, err
}
return &BitcoindFeeEstimator{
fallbackFeePerKW: fallBackFeeRate,
bitcoindConn: chainConn,
2017-11-10 03:30:20 +03:00
}, nil
}
// Start signals the FeeEstimator to start any processes or goroutines
// it needs to perform its duty.
//
// NOTE: This method is part of the FeeEstimator interface.
func (b *BitcoindFeeEstimator) Start() error {
// Once the connection to the backend node has been established, we'll
// query it for its minimum relay fee. Since the `getinfo` RPC has been
// deprecated for `bitcoind`, we'll need to send a `getnetworkinfo`
// command as a raw request.
resp, err := b.bitcoindConn.RawRequest("getnetworkinfo", nil)
if err != nil {
return err
}
// Parse the response to retrieve the relay fee in sat/KB.
info := struct {
RelayFee float64 `json:"relayfee"`
}{}
if err := json.Unmarshal(resp, &info); err != nil {
return err
}
relayFee, err := btcutil.NewAmount(info.RelayFee)
if err != nil {
return err
}
// The fee rate is expressed in sat/kb, so we'll manually convert it to
// our desired sat/kw rate.
minRelayFeePerKw := SatPerKVByte(relayFee).FeePerKWeight()
// By default, we'll use the backend node's minimum relay fee as the
// minimum fee rate we'll propose for transacations. However, if this
// happens to be lower than our fee floor, we'll enforce that instead.
b.minFeePerKW = minRelayFeePerKw
if b.minFeePerKW < FeePerKwFloor {
b.minFeePerKW = FeePerKwFloor
}
walletLog.Debugf("Using minimum fee rate of %v sat/kw",
int64(b.minFeePerKW))
2017-11-10 03:30:20 +03:00
return nil
}
// Stop stops any spawned goroutines and cleans up the resources used
// by the fee estimator.
//
// NOTE: This method is part of the FeeEstimator interface.
func (b *BitcoindFeeEstimator) Stop() error {
return nil
}
// EstimateFeePerKW takes in a target for the number of blocks until an initial
// confirmation and returns the estimated fee expressed in sat/kw.
//
// NOTE: This method is part of the FeeEstimator interface.
func (b *BitcoindFeeEstimator) EstimateFeePerKW(numBlocks uint32) (SatPerKWeight, error) {
feeEstimate, err := b.fetchEstimate(numBlocks)
2017-11-10 03:30:20 +03:00
switch {
// If the estimator doesn't have enough data, or returns an error, then
// to return a proper value, then we'll return the default fall back
// fee rate.
case err != nil:
walletLog.Errorf("unable to query estimator: %v", err)
fallthrough
case feeEstimate == 0:
return b.fallbackFeePerKW, nil
2017-11-10 03:30:20 +03:00
}
return feeEstimate, nil
}
// fetchEstimate returns a fee estimate for a transaction to be confirmed in
// confTarget blocks. The estimate is returned in sat/kw.
func (b *BitcoindFeeEstimator) fetchEstimate(confTarget uint32) (SatPerKWeight, error) {
2017-11-10 03:30:20 +03:00
// First, we'll send an "estimatesmartfee" command as a raw request,
// since it isn't supported by btcd but is available in bitcoind.
target, err := json.Marshal(uint64(confTarget))
if err != nil {
return 0, err
}
// TODO: Allow selection of economical/conservative modifiers.
resp, err := b.bitcoindConn.RawRequest(
"estimatesmartfee", []json.RawMessage{target},
)
2017-11-10 03:30:20 +03:00
if err != nil {
return 0, err
}
// Next, we'll parse the response to get the BTC per KB.
feeEstimate := struct {
FeeRate float64 `json:"feerate"`
2017-11-10 03:30:20 +03:00
}{}
err = json.Unmarshal(resp, &feeEstimate)
if err != nil {
return 0, err
}
// Next, we'll convert the returned value to satoshis, as it's currently
// returned in BTC.
satPerKB, err := btcutil.NewAmount(feeEstimate.FeeRate)
2017-11-10 03:30:20 +03:00
if err != nil {
return 0, err
}
// Since we use fee rates in sat/kw internally, we'll convert the
// estimated fee rate from its sat/kb representation to sat/kw.
satPerKw := SatPerKVByte(satPerKB).FeePerKWeight()
// Finally, we'll enforce our fee floor.
if satPerKw < b.minFeePerKW {
walletLog.Debugf("Estimated fee rate of %v sat/kw is too low, "+
"using fee floor of %v sat/kw instead", b.minFeePerKW)
satPerKw = b.minFeePerKW
}
2017-11-10 03:30:20 +03:00
walletLog.Debugf("Returning %v sat/kw for conf target of %v",
int64(satPerKw), confTarget)
2017-11-10 03:30:20 +03:00
return satPerKw, nil
2017-11-10 03:30:20 +03:00
}
// A compile-time assertion to ensure that BitcoindFeeEstimator implements the
// FeeEstimator interface.
var _ FeeEstimator = (*BitcoindFeeEstimator)(nil)