lnd.xprv/server.go

3172 lines
98 KiB
Go
Raw Normal View History

2019-01-24 16:28:25 +03:00
package lnd
import (
"bytes"
"context"
"crypto/rand"
"encoding/hex"
"fmt"
"image/color"
"math/big"
prand "math/rand"
"net"
"path/filepath"
"regexp"
"strconv"
"sync"
"sync/atomic"
"time"
"github.com/btcsuite/btcd/btcec"
"github.com/btcsuite/btcd/chaincfg/chainhash"
"github.com/btcsuite/btcd/connmgr"
"github.com/btcsuite/btcd/wire"
"github.com/btcsuite/btcutil"
"github.com/coreos/bbolt"
"github.com/go-errors/errors"
sphinx "github.com/lightningnetwork/lightning-onion"
"github.com/lightningnetwork/lnd/autopilot"
"github.com/lightningnetwork/lnd/brontide"
"github.com/lightningnetwork/lnd/chanbackup"
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/channelnotifier"
"github.com/lightningnetwork/lnd/contractcourt"
"github.com/lightningnetwork/lnd/discovery"
"github.com/lightningnetwork/lnd/htlcswitch"
"github.com/lightningnetwork/lnd/input"
"github.com/lightningnetwork/lnd/invoices"
"github.com/lightningnetwork/lnd/lncfg"
"github.com/lightningnetwork/lnd/lnpeer"
"github.com/lightningnetwork/lnd/lnrpc"
"github.com/lightningnetwork/lnd/lnwallet"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/lightningnetwork/lnd/nat"
"github.com/lightningnetwork/lnd/netann"
"github.com/lightningnetwork/lnd/pool"
"github.com/lightningnetwork/lnd/routing"
"github.com/lightningnetwork/lnd/routing/route"
"github.com/lightningnetwork/lnd/sweep"
"github.com/lightningnetwork/lnd/ticker"
"github.com/lightningnetwork/lnd/tor"
"github.com/lightningnetwork/lnd/walletunlocker"
"github.com/lightningnetwork/lnd/zpay32"
)
const (
// defaultMinPeers is the minimum number of peers nodes should always be
// connected to.
defaultMinPeers = 3
// defaultStableConnDuration is a floor under which all reconnection
// attempts will apply exponential randomized backoff. Connections
// durations exceeding this value will be eligible to have their
// backoffs reduced.
defaultStableConnDuration = 10 * time.Minute
// numInstantInitReconnect specifies how many persistent peers we should
// always attempt outbound connections to immediately. After this value
// is surpassed, the remaining peers will be randomly delayed using
// maxInitReconnectDelay.
numInstantInitReconnect = 10
// maxInitReconnectDelay specifies the maximum delay in seconds we will
// apply in attempting to reconnect to persistent peers on startup. The
// value used or a particular peer will be chosen between 0s and this
// value.
maxInitReconnectDelay = 30
)
var (
// ErrPeerNotConnected signals that the server has no connection to the
// given peer.
ErrPeerNotConnected = errors.New("peer is not connected")
// ErrServerShuttingDown indicates that the server is in the process of
// gracefully exiting.
ErrServerShuttingDown = errors.New("server is shutting down")
// validColorRegexp is a regexp that lets you check if a particular
// color string matches the standard hex color format #RRGGBB.
validColorRegexp = regexp.MustCompile("^#[A-Fa-f0-9]{6}$")
)
// errPeerAlreadyConnected is an error returned by the server when we're
// commanded to connect to a peer, but they're already connected.
type errPeerAlreadyConnected struct {
peer *peer
}
// Error returns the human readable version of this error type.
//
// NOTE: Part of the error interface.
func (e *errPeerAlreadyConnected) Error() string {
return fmt.Sprintf("already connected to peer: %v", e.peer)
}
2016-12-25 03:51:25 +03:00
// server is the main server of the Lightning Network Daemon. The server houses
// global state pertaining to the wallet, database, and the rpcserver.
// Additionally, the server is also used as a central messaging bus to interact
// with any of its companion objects.
type server struct {
active int32 // atomic
stopping int32 // atomic
start sync.Once
stop sync.Once
// identityPriv is the private key used to authenticate any incoming
// connections.
identityPriv *btcec.PrivateKey
2016-01-17 06:07:44 +03:00
// nodeSigner is an implementation of the MessageSigner implementation
// that's backed by the identity private key of the running lnd node.
nodeSigner *netann.NodeSigner
chanStatusMgr *netann.ChanStatusManager
// listenAddrs is the list of addresses the server is currently
// listening on.
listenAddrs []net.Addr
// torController is a client that will communicate with a locally
// running Tor server. This client will handle initiating and
// authenticating the connection to the Tor server, automatically
// creating and setting up onion services, etc.
torController *tor.Controller
// natTraversal is the specific NAT traversal technique used to
// automatically set up port forwarding rules in order to advertise to
// the network that the node is accepting inbound connections.
natTraversal nat.Traversal
// lastDetectedIP is the last IP detected by the NAT traversal technique
// above. This IP will be watched periodically in a goroutine in order
// to handle dynamic IP changes.
lastDetectedIP net.IP
mu sync.RWMutex
peersByPub map[string]*peer
inboundPeers map[string]*peer
outboundPeers map[string]*peer
peerConnectedListeners map[string][]chan<- lnpeer.Peer
peerDisconnectedListeners map[string][]chan<- struct{}
persistentPeers map[string]struct{}
persistentPeersBackoff map[string]time.Duration
persistentConnReqs map[string][]*connmgr.ConnReq
persistentRetryCancels map[string]chan struct{}
// ignorePeerTermination tracks peers for which the server has initiated
// a disconnect. Adding a peer to this map causes the peer termination
// watcher to short circuit in the event that peers are purposefully
// disconnected.
ignorePeerTermination map[*peer]struct{}
// scheduledPeerConnection maps a pubkey string to a callback that
// should be executed in the peerTerminationWatcher the prior peer with
// the same pubkey exits. This allows the server to wait until the
// prior peer has cleaned up successfully, before adding the new peer
// intended to replace it.
scheduledPeerConnection map[string]func()
cc *chainControl
fundingMgr *fundingManager
chanDB *channeldb.DB
htlcSwitch *htlcswitch.Switch
invoices *invoices.InvoiceRegistry
channelNotifier *channelnotifier.ChannelNotifier
witnessBeacon contractcourt.WitnessBeacon
breachArbiter *breachArbiter
chanRouter *routing.ChannelRouter
authGossiper *discovery.AuthenticatedGossiper
utxoNursery *utxoNursery
sweeper *sweep.UtxoSweeper
chainArb *contractcourt.ChainArbitrator
sphinx *htlcswitch.OnionProcessor
connMgr *connmgr.ConnManager
sigPool *lnwallet.SigPool
writePool *pool.Write
2019-02-22 07:11:33 +03:00
readPool *pool.Read
// globalFeatures feature vector which affects HTLCs and thus are also
// advertised to other nodes.
globalFeatures *lnwire.FeatureVector
// currentNodeAnn is the node announcement that has been broadcast to
// the network upon startup, if the attributes of the node (us) has
// changed since last start.
currentNodeAnn *lnwire.NodeAnnouncement
// chansToRestore is the set of channels that upon starting, the server
// should attempt to restore/recover.
chansToRestore walletunlocker.ChannelsToRecover
// chanSubSwapper is a sub-system that will ensure our on-disk channel
// backups are consistent at all times. It interacts with the
// channelNotifier to be notified of newly opened and closed channels.
chanSubSwapper *chanbackup.SubSwapper
quit chan struct{}
wg sync.WaitGroup
}
// parseAddr parses an address from its string format to a net.Addr.
func parseAddr(address string) (net.Addr, error) {
var (
host string
port int
)
// Split the address into its host and port components.
h, p, err := net.SplitHostPort(address)
if err != nil {
// If a port wasn't specified, we'll assume the address only
// contains the host so we'll use the default port.
host = address
port = defaultPeerPort
} else {
// Otherwise, we'll note both the host and ports.
host = h
portNum, err := strconv.Atoi(p)
if err != nil {
return nil, err
}
port = portNum
}
if tor.IsOnionHost(host) {
return &tor.OnionAddr{OnionService: host, Port: port}, nil
}
// If the host is part of a TCP address, we'll use the network
// specific ResolveTCPAddr function in order to resolve these
// addresses over Tor in order to prevent leaking your real IP
// address.
hostPort := net.JoinHostPort(host, strconv.Itoa(port))
return cfg.net.ResolveTCPAddr("tcp", hostPort)
}
// noiseDial is a factory function which creates a connmgr compliant dialing
// function by returning a closure which includes the server's identity key.
func noiseDial(idPriv *btcec.PrivateKey) func(net.Addr) (net.Conn, error) {
return func(a net.Addr) (net.Conn, error) {
lnAddr := a.(*lnwire.NetAddress)
return brontide.Dial(idPriv, lnAddr, cfg.net.Dial)
}
}
// newServer creates a new instance of the server which is to listen using the
// passed listener address.
func newServer(listenAddrs []net.Addr, chanDB *channeldb.DB, cc *chainControl,
privKey *btcec.PrivateKey,
chansToRestore walletunlocker.ChannelsToRecover) (*server, error) {
var err error
2016-01-17 06:07:44 +03:00
listeners := make([]net.Listener, len(listenAddrs))
for i, listenAddr := range listenAddrs {
// Note: though brontide.NewListener uses ResolveTCPAddr, it
// doesn't need to call the general lndResolveTCP function
// since we are resolving a local address.
listeners[i], err = brontide.NewListener(
privKey, listenAddr.String(),
)
2016-01-17 06:07:44 +03:00
if err != nil {
return nil, err
}
}
globalFeatures := lnwire.NewRawFeatureVector()
var serializedPubKey [33]byte
copy(serializedPubKey[:], privKey.PubKey().SerializeCompressed())
// Initialize the sphinx router, placing it's persistent replay log in
// the same directory as the channel graph database.
graphDir := chanDB.Path()
sharedSecretPath := filepath.Join(graphDir, "sphinxreplay.db")
replayLog := htlcswitch.NewDecayedLog(sharedSecretPath, cc.chainNotifier)
sphinxRouter := sphinx.NewRouter(privKey, activeNetParams.Params, replayLog)
2019-02-22 07:11:33 +03:00
writeBufferPool := pool.NewWriteBuffer(
pool.DefaultWriteBufferGCInterval,
pool.DefaultWriteBufferExpiryInterval,
)
writePool := pool.NewWrite(
writeBufferPool, cfg.Workers.Write, pool.DefaultWorkerTimeout,
)
2019-02-22 07:11:33 +03:00
readBufferPool := pool.NewReadBuffer(
pool.DefaultReadBufferGCInterval,
pool.DefaultReadBufferExpiryInterval,
)
readPool := pool.NewRead(
readBufferPool, cfg.Workers.Read, pool.DefaultWorkerTimeout,
2019-02-22 07:11:33 +03:00
)
decodeFinalCltvExpiry := func(payReq string) (uint32, error) {
invoice, err := zpay32.Decode(payReq, activeNetParams.Params)
if err != nil {
return 0, err
}
return uint32(invoice.MinFinalCLTVExpiry()), nil
}
2016-01-17 06:07:44 +03:00
s := &server{
chanDB: chanDB,
cc: cc,
sigPool: lnwallet.NewSigPool(cfg.Workers.Sig, cc.signer),
writePool: writePool,
readPool: readPool,
chansToRestore: chansToRestore,
invoices: invoices.NewRegistry(chanDB, decodeFinalCltvExpiry),
channelNotifier: channelnotifier.New(chanDB),
identityPriv: privKey,
nodeSigner: netann.NewNodeSigner(privKey),
listenAddrs: listenAddrs,
// TODO(roasbeef): derive proper onion key based on rotation
// schedule
sphinx: htlcswitch.NewOnionProcessor(sphinxRouter),
persistentPeers: make(map[string]struct{}),
persistentPeersBackoff: make(map[string]time.Duration),
persistentConnReqs: make(map[string][]*connmgr.ConnReq),
persistentRetryCancels: make(map[string]chan struct{}),
ignorePeerTermination: make(map[*peer]struct{}),
scheduledPeerConnection: make(map[string]func()),
peersByPub: make(map[string]*peer),
inboundPeers: make(map[string]*peer),
outboundPeers: make(map[string]*peer),
peerConnectedListeners: make(map[string][]chan<- lnpeer.Peer),
peerDisconnectedListeners: make(map[string][]chan<- struct{}),
globalFeatures: lnwire.NewFeatureVector(globalFeatures,
lnwire.GlobalFeatures),
quit: make(chan struct{}),
2016-01-17 06:07:44 +03:00
}
2018-01-20 04:41:08 +03:00
s.witnessBeacon = &preimageBeacon{
wCache: chanDB.NewWitnessCache(),
subscribers: make(map[uint64]*preimageSubscriber),
2018-01-20 04:41:08 +03:00
}
// If the debug HTLC flag is on, then we invoice a "master debug"
// invoice which all outgoing payments will be sent and all incoming
// HTLCs with the debug R-Hash immediately settled.
if cfg.DebugHTLC {
kiloCoin := btcutil.Amount(btcutil.SatoshiPerBitcoin * 1000)
s.invoices.AddDebugInvoice(kiloCoin, invoices.DebugPre)
srvrLog.Debugf("Debug HTLC invoice inserted, preimage=%x, hash=%x",
invoices.DebugPre[:], invoices.DebugHash[:])
}
_, currentHeight, err := s.cc.chainIO.GetBestBlock()
if err != nil {
return nil, err
}
s.htlcSwitch, err = htlcswitch.New(htlcswitch.Config{
DB: chanDB,
SelfKey: s.identityPriv.PubKey(),
LocalChannelClose: func(pubKey []byte,
request *htlcswitch.ChanClose) {
peer, err := s.FindPeerByPubStr(string(pubKey))
if err != nil {
srvrLog.Errorf("unable to close channel, peer"+
" with %v id can't be found: %v",
pubKey, err,
)
return
}
select {
case peer.localCloseChanReqs <- request:
srvrLog.Infof("Local close channel request "+
"delivered to peer: %x", pubKey[:])
case <-peer.quit:
srvrLog.Errorf("Unable to deliver local close "+
"channel request to peer %x, err: %v",
pubKey[:], err)
}
},
FwdingLog: chanDB.ForwardingLog(),
SwitchPackager: channeldb.NewSwitchPackager(),
ExtractErrorEncrypter: s.sphinx.ExtractErrorEncrypter,
FetchLastChannelUpdate: s.fetchLastChanUpdate(),
Notifier: s.cc.chainNotifier,
FwdEventTicker: ticker.New(
htlcswitch.DefaultFwdEventInterval),
LogEventTicker: ticker.New(
htlcswitch.DefaultLogInterval),
NotifyActiveChannel: s.channelNotifier.NotifyActiveChannelEvent,
NotifyInactiveChannel: s.channelNotifier.NotifyInactiveChannelEvent,
}, uint32(currentHeight))
if err != nil {
return nil, err
}
chanStatusMgrCfg := &netann.ChanStatusConfig{
ChanStatusSampleInterval: cfg.ChanStatusSampleInterval,
ChanEnableTimeout: cfg.ChanEnableTimeout,
ChanDisableTimeout: cfg.ChanDisableTimeout,
OurPubKey: privKey.PubKey(),
MessageSigner: s.nodeSigner,
IsChannelActive: s.htlcSwitch.HasActiveLink,
ApplyChannelUpdate: s.applyChannelUpdate,
DB: chanDB,
Graph: chanDB.ChannelGraph(),
}
chanStatusMgr, err := netann.NewChanStatusManager(chanStatusMgrCfg)
if err != nil {
return nil, err
}
s.chanStatusMgr = chanStatusMgr
2018-01-21 20:22:13 +03:00
// If enabled, use either UPnP or NAT-PMP to automatically configure
// port forwarding for users behind a NAT.
if cfg.NAT {
srvrLog.Info("Scanning local network for a UPnP enabled device")
discoveryTimeout := time.Duration(10 * time.Second)
ctx, cancel := context.WithTimeout(
context.Background(), discoveryTimeout,
)
defer cancel()
upnp, err := nat.DiscoverUPnP(ctx)
2018-01-21 20:22:13 +03:00
if err == nil {
s.natTraversal = upnp
} else {
// If we were not able to discover a UPnP enabled device
// on the local network, we'll fall back to attempting
// to discover a NAT-PMP enabled device.
srvrLog.Errorf("Unable to discover a UPnP enabled "+
"device on the local network: %v", err)
srvrLog.Info("Scanning local network for a NAT-PMP " +
"enabled device")
pmp, err := nat.DiscoverPMP(discoveryTimeout)
if err != nil {
err := fmt.Errorf("Unable to discover a "+
"NAT-PMP enabled device on the local "+
"network: %v", err)
srvrLog.Error(err)
return nil, err
}
s.natTraversal = pmp
}
2018-01-20 21:58:06 +03:00
}
// If we were requested to automatically configure port forwarding,
// we'll use the ports that the server will be listening on.
2018-07-31 11:29:12 +03:00
externalIPStrings := make([]string, len(cfg.ExternalIPs))
for idx, ip := range cfg.ExternalIPs {
2018-07-31 11:29:12 +03:00
externalIPStrings[idx] = ip.String()
}
if s.natTraversal != nil {
listenPorts := make([]uint16, 0, len(listenAddrs))
for _, listenAddr := range listenAddrs {
// At this point, the listen addresses should have
// already been normalized, so it's safe to ignore the
// errors.
_, portStr, _ := net.SplitHostPort(listenAddr.String())
port, _ := strconv.Atoi(portStr)
listenPorts = append(listenPorts, uint16(port))
}
ips, err := s.configurePortForwarding(listenPorts...)
if err != nil {
srvrLog.Errorf("Unable to automatically set up port "+
"forwarding using %s: %v",
s.natTraversal.Name(), err)
} else {
srvrLog.Infof("Automatically set up port forwarding "+
"using %s to advertise external IP",
s.natTraversal.Name())
2018-07-31 11:29:12 +03:00
externalIPStrings = append(externalIPStrings, ips...)
}
}
// If external IP addresses have been specified, add those to the list
// of this server's addresses.
externalIPs, err := lncfg.NormalizeAddresses(
2018-07-31 11:29:12 +03:00
externalIPStrings, strconv.Itoa(defaultPeerPort),
cfg.net.ResolveTCPAddr,
)
if err != nil {
return nil, err
}
selfAddrs := make([]net.Addr, 0, len(externalIPs))
for _, ip := range externalIPs {
selfAddrs = append(selfAddrs, ip)
}
// If we were requested to route connections through Tor and to
// automatically create an onion service, we'll initiate our Tor
// controller and establish a connection to the Tor server.
if cfg.Tor.Active && (cfg.Tor.V2 || cfg.Tor.V3) {
s.torController = tor.NewController(cfg.Tor.Control)
}
chanGraph := chanDB.ChannelGraph()
// We'll now reconstruct a node announcement based on our current
// configuration so we can send it out as a sort of heart beat within
// the network.
//
// We'll start by parsing the node color from configuration.
color, err := parseHexColor(cfg.Color)
if err != nil {
srvrLog.Errorf("unable to parse color: %v\n", err)
return nil, err
}
// If no alias is provided, default to first 10 characters of public
// key.
alias := cfg.Alias
if alias == "" {
alias = hex.EncodeToString(serializedPubKey[:10])
}
nodeAlias, err := lnwire.NewNodeAlias(alias)
if err != nil {
return nil, err
}
selfNode := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Now(),
Addresses: selfAddrs,
Alias: nodeAlias.String(),
Features: s.globalFeatures,
Color: color,
}
copy(selfNode.PubKeyBytes[:], privKey.PubKey().SerializeCompressed())
// Based on the disk representation of the node announcement generated
// above, we'll generate a node announcement that can go out on the
// network so we can properly sign it.
nodeAnn, err := selfNode.NodeAnnouncement(false)
if err != nil {
return nil, fmt.Errorf("unable to gen self node ann: %v", err)
}
// With the announcement generated, we'll sign it to properly
// authenticate the message on the network.
authSig, err := discovery.SignAnnouncement(
s.nodeSigner, s.identityPriv.PubKey(), nodeAnn,
)
if err != nil {
return nil, fmt.Errorf("unable to generate signature for "+
"self node announcement: %v", err)
}
selfNode.AuthSigBytes = authSig.Serialize()
nodeAnn.Signature, err = lnwire.NewSigFromRawSignature(
selfNode.AuthSigBytes,
)
if err != nil {
return nil, err
}
// Finally, we'll update the representation on disk, and update our
// cached in-memory version as well.
if err := chanGraph.SetSourceNode(selfNode); err != nil {
return nil, fmt.Errorf("can't set self node: %v", err)
}
s.currentNodeAnn = nodeAnn
s.chanRouter, err = routing.New(routing.Config{
Graph: chanGraph,
Chain: cc.chainIO,
ChainView: cc.chainView,
SendToSwitch: func(firstHop lnwire.ShortChannelID,
htlcAdd *lnwire.UpdateAddHTLC,
circuit *sphinx.Circuit) ([32]byte, error) {
// Using the created circuit, initialize the error
// decrypter so we can parse+decode any failures
// incurred by this payment within the switch.
errorDecryptor := &htlcswitch.SphinxErrorDecrypter{
OnionErrorDecrypter: sphinx.NewOnionErrorDecrypter(circuit),
}
return s.htlcSwitch.SendHTLC(
firstHop, htlcAdd, errorDecryptor,
)
},
ChannelPruneExpiry: routing.DefaultChannelPruneExpiry,
GraphPruneInterval: time.Duration(time.Hour),
QueryBandwidth: func(edge *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi {
// If we aren't on either side of this edge, then we'll
// just thread through the capacity of the edge as we
// know it.
if !bytes.Equal(edge.NodeKey1Bytes[:], selfNode.PubKeyBytes[:]) &&
!bytes.Equal(edge.NodeKey2Bytes[:], selfNode.PubKeyBytes[:]) {
return lnwire.NewMSatFromSatoshis(edge.Capacity)
}
cid := lnwire.NewChanIDFromOutPoint(&edge.ChannelPoint)
link, err := s.htlcSwitch.GetLink(cid)
if err != nil {
// If the link isn't online, then we'll report
// that it has zero bandwidth to the router.
return 0
}
// If the link is found within the switch, but it isn't
// yet eligible to forward any HTLCs, then we'll treat
// it as if it isn't online in the first place.
if !link.EligibleToForward() {
return 0
}
// Otherwise, we'll return the current best estimate
// for the available bandwidth for the link.
return link.Bandwidth()
},
AssumeChannelValid: cfg.Routing.UseAssumeChannelValid(),
})
if err != nil {
return nil, fmt.Errorf("can't create router: %v", err)
}
chanSeries := discovery.NewChanSeries(s.chanDB.ChannelGraph())
gossipMessageStore, err := discovery.NewMessageStore(s.chanDB)
if err != nil {
return nil, err
}
waitingProofStore, err := channeldb.NewWaitingProofStore(s.chanDB)
if err != nil {
return nil, err
}
s.authGossiper = discovery.New(discovery.Config{
Router: s.chanRouter,
Notifier: s.cc.chainNotifier,
ChainHash: *activeNetParams.GenesisHash,
Broadcast: s.BroadcastMessage,
ChanSeries: chanSeries,
NotifyWhenOnline: s.NotifyWhenOnline,
NotifyWhenOffline: s.NotifyWhenOffline,
ProofMatureDelta: 0,
TrickleDelay: time.Millisecond * time.Duration(cfg.TrickleDelay),
RetransmitDelay: time.Minute * 30,
WaitingProofStore: waitingProofStore,
MessageStore: gossipMessageStore,
AnnSigner: s.nodeSigner,
RotateTicker: ticker.New(discovery.DefaultSyncerRotationInterval),
HistoricalSyncTicker: ticker.New(cfg.HistoricalSyncInterval),
NumActiveSyncers: cfg.NumGraphSyncPeers,
},
s.identityPriv.PubKey(),
)
utxnStore, err := newNurseryStore(activeNetParams.GenesisHash, chanDB)
if err != nil {
srvrLog.Errorf("unable to create nursery store: %v", err)
return nil, err
}
srvrLog.Tracef("Sweeper batch window duration: %v",
sweep.DefaultBatchWindowDuration)
sweeperStore, err := sweep.NewSweeperStore(
chanDB, activeNetParams.GenesisHash,
)
if err != nil {
srvrLog.Errorf("unable to create sweeper store: %v", err)
return nil, err
}
s.sweeper = sweep.New(&sweep.UtxoSweeperConfig{
FeeEstimator: cc.feeEstimator,
GenSweepScript: func() ([]byte, error) {
return newSweepPkScript(cc.wallet)
},
Signer: cc.wallet.Cfg.Signer,
PublishTransaction: cc.wallet.PublishTransaction,
NewBatchTimer: func() <-chan time.Time {
return time.NewTimer(sweep.DefaultBatchWindowDuration).C
},
SweepTxConfTarget: 6,
Notifier: cc.chainNotifier,
ChainIO: cc.chainIO,
Store: sweeperStore,
MaxInputsPerTx: sweep.DefaultMaxInputsPerTx,
MaxSweepAttempts: sweep.DefaultMaxSweepAttempts,
NextAttemptDeltaFunc: sweep.DefaultNextAttemptDeltaFunc,
})
s.utxoNursery = newUtxoNursery(&NurseryConfig{
2018-09-12 23:23:06 +03:00
ChainIO: cc.chainIO,
ConfDepth: 1,
FetchClosedChannels: chanDB.FetchClosedChannels,
FetchClosedChannel: chanDB.FetchClosedChannel,
Notifier: cc.chainNotifier,
PublishTransaction: cc.wallet.PublishTransaction,
Store: utxnStore,
SweepInput: s.sweeper.SweepInput,
})
// Construct a closure that wraps the htlcswitch's CloseLink method.
closeLink := func(chanPoint *wire.OutPoint,
closureType htlcswitch.ChannelCloseType) {
// TODO(conner): Properly respect the update and error channels
// returned by CloseLink.
s.htlcSwitch.CloseLink(chanPoint, closureType, 0)
}
// We will use the following channel to reliably hand off contract
// breach events from the ChannelArbitrator to the breachArbiter,
contractBreaches := make(chan *ContractBreachEvent, 1)
s.chainArb = contractcourt.NewChainArbitrator(contractcourt.ChainArbitratorConfig{
ChainHash: *activeNetParams.GenesisHash,
IncomingBroadcastDelta: defaultIncomingBroadcastDelta,
OutgoingBroadcastDelta: defaultOutgoingBroadcastDelta,
NewSweepAddr: func() ([]byte, error) {
return newSweepPkScript(cc.wallet)
},
PublishTx: cc.wallet.PublishTransaction,
DeliverResolutionMsg: func(msgs ...contractcourt.ResolutionMsg) error {
for _, msg := range msgs {
err := s.htlcSwitch.ProcessContractResolution(msg)
if err != nil {
return err
}
}
return nil
},
IncubateOutputs: func(chanPoint wire.OutPoint,
commitRes *lnwallet.CommitOutputResolution,
outHtlcRes *lnwallet.OutgoingHtlcResolution,
inHtlcRes *lnwallet.IncomingHtlcResolution,
broadcastHeight uint32) error {
var (
inRes []lnwallet.IncomingHtlcResolution
outRes []lnwallet.OutgoingHtlcResolution
)
if inHtlcRes != nil {
inRes = append(inRes, *inHtlcRes)
}
if outHtlcRes != nil {
outRes = append(outRes, *outHtlcRes)
}
return s.utxoNursery.IncubateOutputs(
chanPoint, commitRes, outRes, inRes,
broadcastHeight,
)
},
PreimageDB: s.witnessBeacon,
Notifier: cc.chainNotifier,
Signer: cc.wallet.Cfg.Signer,
FeeEstimator: cc.feeEstimator,
ChainIO: cc.chainIO,
MarkLinkInactive: func(chanPoint wire.OutPoint) error {
chanID := lnwire.NewChanIDFromOutPoint(&chanPoint)
s.htlcSwitch.RemoveLink(chanID)
return nil
},
IsOurAddress: cc.wallet.IsOurAddress,
ContractBreach: func(chanPoint wire.OutPoint,
breachRet *lnwallet.BreachRetribution) error {
event := &ContractBreachEvent{
ChanPoint: chanPoint,
ProcessACK: make(chan error, 1),
BreachRetribution: breachRet,
}
// Send the contract breach event to the breachArbiter.
select {
case contractBreaches <- event:
case <-s.quit:
return ErrServerShuttingDown
}
// Wait for the breachArbiter to ACK the event.
select {
case err := <-event.ProcessACK:
return err
case <-s.quit:
return ErrServerShuttingDown
}
},
DisableChannel: s.chanStatusMgr.RequestDisable,
Sweeper: s.sweeper,
Registry: s.invoices,
NotifyClosedChannel: s.channelNotifier.NotifyClosedChannelEvent,
}, chanDB)
s.breachArbiter = newBreachArbiter(&BreachConfig{
CloseLink: closeLink,
DB: chanDB,
Estimator: s.cc.feeEstimator,
GenSweepScript: func() ([]byte, error) {
return newSweepPkScript(cc.wallet)
},
Notifier: cc.chainNotifier,
PublishTransaction: cc.wallet.PublishTransaction,
ContractBreaches: contractBreaches,
Signer: cc.wallet.Cfg.Signer,
Store: newRetributionStore(chanDB),
})
// Select the configuration and furnding parameters for Bitcoin or
// Litecoin, depending on the primary registered chain.
primaryChain := registeredChains.PrimaryChain()
chainCfg := cfg.Bitcoin
minRemoteDelay := minBtcRemoteDelay
maxRemoteDelay := maxBtcRemoteDelay
if primaryChain == litecoinChain {
chainCfg = cfg.Litecoin
minRemoteDelay = minLtcRemoteDelay
maxRemoteDelay = maxLtcRemoteDelay
}
var chanIDSeed [32]byte
if _, err := rand.Read(chanIDSeed[:]); err != nil {
return nil, err
}
s.fundingMgr, err = newFundingManager(fundingConfig{
IDKey: privKey.PubKey(),
Wallet: cc.wallet,
PublishTransaction: cc.wallet.PublishTransaction,
Notifier: cc.chainNotifier,
FeeEstimator: cc.feeEstimator,
SignMessage: func(pubKey *btcec.PublicKey,
msg []byte) (*btcec.Signature, error) {
if pubKey.IsEqual(privKey.PubKey()) {
return s.nodeSigner.SignMessage(pubKey, msg)
}
return cc.msgSigner.SignMessage(pubKey, msg)
},
CurrentNodeAnnouncement: func() (lnwire.NodeAnnouncement, error) {
return s.genNodeAnnouncement(true)
},
SendAnnouncement: func(msg lnwire.Message,
optionalFields ...discovery.OptionalMsgField) chan error {
return s.authGossiper.ProcessLocalAnnouncement(
msg, privKey.PubKey(), optionalFields...,
)
},
NotifyWhenOnline: s.NotifyWhenOnline,
TempChanIDSeed: chanIDSeed,
FindChannel: func(chanID lnwire.ChannelID) (
*channeldb.OpenChannel, error) {
dbChannels, err := chanDB.FetchAllChannels()
if err != nil {
return nil, err
}
for _, channel := range dbChannels {
if chanID.IsChanPoint(&channel.FundingOutpoint) {
return channel, nil
}
}
return nil, fmt.Errorf("unable to find channel")
},
DefaultRoutingPolicy: cc.routingPolicy,
NumRequiredConfs: func(chanAmt btcutil.Amount,
pushAmt lnwire.MilliSatoshi) uint16 {
// For large channels we increase the number
// of confirmations we require for the
// channel to be considered open. As it is
// always the responder that gets to choose
// value, the pushAmt is value being pushed
// to us. This means we have more to lose
// in the case this gets re-orged out, and
// we will require more confirmations before
// we consider it open.
// TODO(halseth): Use Litecoin params in case
// of LTC channels.
// In case the user has explicitly specified
// a default value for the number of
// confirmations, we use it.
defaultConf := uint16(chainCfg.DefaultNumChanConfs)
if defaultConf != 0 {
return defaultConf
}
// If not we return a value scaled linearly
// between 3 and 6, depending on channel size.
// TODO(halseth): Use 1 as minimum?
minConf := uint64(3)
maxConf := uint64(6)
maxChannelSize := uint64(
lnwire.NewMSatFromSatoshis(maxFundingAmount))
stake := lnwire.NewMSatFromSatoshis(chanAmt) + pushAmt
conf := maxConf * uint64(stake) / maxChannelSize
if conf < minConf {
conf = minConf
}
if conf > maxConf {
conf = maxConf
}
return uint16(conf)
},
RequiredRemoteDelay: func(chanAmt btcutil.Amount) uint16 {
// We scale the remote CSV delay (the time the
// remote have to claim funds in case of a unilateral
// close) linearly from minRemoteDelay blocks
// for small channels, to maxRemoteDelay blocks
// for channels of size maxFundingAmount.
// TODO(halseth): Litecoin parameter for LTC.
// In case the user has explicitly specified
// a default value for the remote delay, we
// use it.
defaultDelay := uint16(chainCfg.DefaultRemoteDelay)
if defaultDelay > 0 {
return defaultDelay
}
// If not we scale according to channel size.
delay := uint16(btcutil.Amount(maxRemoteDelay) *
chanAmt / maxFundingAmount)
if delay < minRemoteDelay {
delay = minRemoteDelay
}
if delay > maxRemoteDelay {
delay = maxRemoteDelay
}
return delay
},
WatchNewChannel: func(channel *channeldb.OpenChannel,
peerKey *btcec.PublicKey) error {
// First, we'll mark this new peer as a persistent peer
// for re-connection purposes.
s.mu.Lock()
pubStr := string(peerKey.SerializeCompressed())
s.persistentPeers[pubStr] = struct{}{}
s.mu.Unlock()
// With that taken care of, we'll send this channel to
// the chain arb so it can react to on-chain events.
return s.chainArb.WatchNewChannel(channel)
},
ReportShortChanID: func(chanPoint wire.OutPoint) error {
cid := lnwire.NewChanIDFromOutPoint(&chanPoint)
return s.htlcSwitch.UpdateShortChanID(cid)
},
RequiredRemoteChanReserve: func(chanAmt,
dustLimit btcutil.Amount) btcutil.Amount {
// By default, we'll require the remote peer to maintain
// at least 1% of the total channel capacity at all
// times. If this value ends up dipping below the dust
// limit, then we'll use the dust limit itself as the
// reserve as required by BOLT #2.
reserve := chanAmt / 100
if reserve < dustLimit {
reserve = dustLimit
}
return reserve
},
RequiredRemoteMaxValue: func(chanAmt btcutil.Amount) lnwire.MilliSatoshi {
// By default, we'll allow the remote peer to fully
// utilize the full bandwidth of the channel, minus our
// required reserve.
reserve := lnwire.NewMSatFromSatoshis(chanAmt / 100)
return lnwire.NewMSatFromSatoshis(chanAmt) - reserve
},
RequiredRemoteMaxHTLCs: func(chanAmt btcutil.Amount) uint16 {
// By default, we'll permit them to utilize the full
// channel bandwidth.
return uint16(input.MaxHTLCNumber / 2)
},
ZombieSweeperInterval: 1 * time.Minute,
ReservationTimeout: 10 * time.Minute,
MinChanSize: btcutil.Amount(cfg.MinChanSize),
NotifyOpenChannelEvent: s.channelNotifier.NotifyOpenChannelEvent,
})
if err != nil {
return nil, err
}
// Next, we'll assemble the sub-system that will maintain an on-disk
// static backup of the latest channel state.
chanNotifier := &channelNotifier{
chanNotifier: s.channelNotifier,
addrs: s.chanDB,
}
backupFile := chanbackup.NewMultiFile(cfg.BackupFilePath)
startingChans, err := chanbackup.FetchStaticChanBackups(s.chanDB)
if err != nil {
return nil, err
}
s.chanSubSwapper, err = chanbackup.NewSubSwapper(
startingChans, chanNotifier, s.cc.keyRing, backupFile,
)
if err != nil {
return nil, err
}
// Create the connection manager which will be responsible for
// maintaining persistent outbound connections and also accepting new
// incoming connections
cmgr, err := connmgr.New(&connmgr.Config{
Listeners: listeners,
OnAccept: s.InboundPeerConnected,
RetryDuration: time.Second * 5,
TargetOutbound: 100,
Dial: noiseDial(s.identityPriv),
OnConnection: s.OutboundPeerConnected,
})
if err != nil {
return nil, err
}
s.connMgr = cmgr
return s, nil
}
// Started returns true if the server has been started, and false otherwise.
// NOTE: This function is safe for concurrent access.
func (s *server) Started() bool {
return atomic.LoadInt32(&s.active) != 0
}
// Start starts the main daemon server, all requested listeners, and any helper
// goroutines.
// NOTE: This function is safe for concurrent access.
func (s *server) Start() error {
var startErr error
s.start.Do(func() {
if s.torController != nil {
if err := s.initTorController(); err != nil {
startErr = err
return
}
}
if s.natTraversal != nil {
s.wg.Add(1)
go s.watchExternalIP()
}
// Start the notification server. This is used so channel
// management goroutines can be notified when a funding
// transaction reaches a sufficient number of confirmations, or
// when the input for the funding transaction is spent in an
// attempt at an uncooperative close by the counterparty.
if err := s.sigPool.Start(); err != nil {
startErr = err
return
}
if err := s.writePool.Start(); err != nil {
startErr = err
return
}
if err := s.readPool.Start(); err != nil {
startErr = err
return
}
if err := s.cc.chainNotifier.Start(); err != nil {
startErr = err
return
}
if err := s.channelNotifier.Start(); err != nil {
startErr = err
return
}
if err := s.sphinx.Start(); err != nil {
startErr = err
return
}
if err := s.htlcSwitch.Start(); err != nil {
startErr = err
return
}
if err := s.sweeper.Start(); err != nil {
startErr = err
return
}
if err := s.utxoNursery.Start(); err != nil {
startErr = err
return
}
if err := s.chainArb.Start(); err != nil {
startErr = err
return
}
if err := s.breachArbiter.Start(); err != nil {
startErr = err
return
}
if err := s.authGossiper.Start(); err != nil {
startErr = err
return
}
if err := s.chanRouter.Start(); err != nil {
startErr = err
return
}
if err := s.fundingMgr.Start(); err != nil {
startErr = err
return
}
if err := s.invoices.Start(); err != nil {
startErr = err
return
}
if err := s.chanStatusMgr.Start(); err != nil {
startErr = err
return
}
// Before we start the connMgr, we'll check to see if we have
// any backups to recover. We do this now as we want to ensure
// that have all the information we need to handle channel
// recovery _before_ we even accept connections from any peers.
chanRestorer := &chanDBRestorer{
db: s.chanDB,
secretKeys: s.cc.keyRing,
chainArb: s.chainArb,
}
if len(s.chansToRestore.PackedSingleChanBackups) != 0 {
err := chanbackup.UnpackAndRecoverSingles(
s.chansToRestore.PackedSingleChanBackups,
s.cc.keyRing, chanRestorer, s,
)
if err != nil {
startErr = fmt.Errorf("unable to unpack single "+
"backups: %v", err)
return
}
}
if len(s.chansToRestore.PackedMultiChanBackup) != 0 {
err := chanbackup.UnpackAndRecoverMulti(
s.chansToRestore.PackedMultiChanBackup,
s.cc.keyRing, chanRestorer, s,
)
if err != nil {
startErr = fmt.Errorf("unable to unpack chan "+
"backup: %v", err)
return
}
}
if err := s.chanSubSwapper.Start(); err != nil {
startErr = err
return
}
s.connMgr.Start()
// With all the relevant sub-systems started, we'll now attempt
// to establish persistent connections to our direct channel
// collaborators within the network. Before doing so however,
// we'll prune our set of link nodes found within the database
// to ensure we don't reconnect to any nodes we no longer have
// open channels with.
if err := s.chanDB.PruneLinkNodes(); err != nil {
startErr = err
return
}
if err := s.establishPersistentConnections(); err != nil {
startErr = err
return
}
// If network bootstrapping hasn't been disabled, then we'll
// configure the set of active bootstrappers, and launch a
// dedicated goroutine to maintain a set of persistent
// connections.
if !cfg.NoNetBootstrap && !(cfg.Bitcoin.SimNet || cfg.Litecoin.SimNet) &&
!(cfg.Bitcoin.RegTest || cfg.Litecoin.RegTest) {
bootstrappers, err := initNetworkBootstrappers(s)
if err != nil {
startErr = err
return
}
s.wg.Add(1)
go s.peerBootstrapper(defaultMinPeers, bootstrappers)
} else {
srvrLog.Infof("Auto peer bootstrapping is disabled")
}
// Set the active flag now that we've completed the full
// startup.
atomic.StoreInt32(&s.active, 1)
})
return startErr
}
// Stop gracefully shutsdown the main daemon server. This function will signal
// any active goroutines, or helper objects to exit, then blocks until they've
// all successfully exited. Additionally, any/all listeners are closed.
// NOTE: This function is safe for concurrent access.
func (s *server) Stop() error {
s.stop.Do(func() {
atomic.LoadInt32(&s.stopping)
close(s.quit)
if s.torController != nil {
s.torController.Stop()
}
// Shutdown the wallet, funding manager, and the rpc server.
s.chanStatusMgr.Stop()
s.cc.chainNotifier.Stop()
s.chanRouter.Stop()
s.htlcSwitch.Stop()
s.sphinx.Stop()
s.utxoNursery.Stop()
s.breachArbiter.Stop()
s.authGossiper.Stop()
s.chainArb.Stop()
s.sweeper.Stop()
s.channelNotifier.Stop()
s.cc.wallet.Shutdown()
s.cc.chainView.Stop()
s.connMgr.Stop()
s.cc.feeEstimator.Stop()
s.invoices.Stop()
s.fundingMgr.Stop()
s.chanSubSwapper.Stop()
// Disconnect from each active peers to ensure that
// peerTerminationWatchers signal completion to each peer.
for _, peer := range s.Peers() {
s.DisconnectPeer(peer.addr.IdentityKey)
}
// Wait for all lingering goroutines to quit.
s.wg.Wait()
s.sigPool.Stop()
s.writePool.Stop()
s.readPool.Stop()
})
return nil
}
// Stopped returns true if the server has been instructed to shutdown.
// NOTE: This function is safe for concurrent access.
func (s *server) Stopped() bool {
return atomic.LoadInt32(&s.stopping) != 0
}
2018-09-06 11:48:46 +03:00
// configurePortForwarding attempts to set up port forwarding for the different
// ports that the server will be listening on.
//
// NOTE: This should only be used when using some kind of NAT traversal to
// automatically set up forwarding rules.
func (s *server) configurePortForwarding(ports ...uint16) ([]string, error) {
ip, err := s.natTraversal.ExternalIP()
if err != nil {
return nil, err
}
s.lastDetectedIP = ip
externalIPs := make([]string, 0, len(ports))
for _, port := range ports {
if err := s.natTraversal.AddPortMapping(port); err != nil {
srvrLog.Debugf("Unable to forward port %d: %v", port, err)
continue
}
hostIP := fmt.Sprintf("%v:%d", ip, port)
externalIPs = append(externalIPs, hostIP)
}
return externalIPs, nil
}
// removePortForwarding attempts to clear the forwarding rules for the different
// ports the server is currently listening on.
//
// NOTE: This should only be used when using some kind of NAT traversal to
// automatically set up forwarding rules.
func (s *server) removePortForwarding() {
forwardedPorts := s.natTraversal.ForwardedPorts()
for _, port := range forwardedPorts {
if err := s.natTraversal.DeletePortMapping(port); err != nil {
srvrLog.Errorf("Unable to remove forwarding rules for "+
"port %d: %v", port, err)
}
}
}
2018-09-06 11:48:46 +03:00
// watchExternalIP continuously checks for an updated external IP address every
// 15 minutes. Once a new IP address has been detected, it will automatically
// handle port forwarding rules and send updated node announcements to the
// currently connected peers.
//
// NOTE: This MUST be run as a goroutine.
func (s *server) watchExternalIP() {
defer s.wg.Done()
// Before exiting, we'll make sure to remove the forwarding rules set
// up by the server.
defer s.removePortForwarding()
// Keep track of the external IPs set by the user to avoid replacing
// them when detecting a new IP.
ipsSetByUser := make(map[string]struct{})
for _, ip := range cfg.ExternalIPs {
ipsSetByUser[ip.String()] = struct{}{}
}
forwardedPorts := s.natTraversal.ForwardedPorts()
ticker := time.NewTicker(15 * time.Minute)
defer ticker.Stop()
out:
for {
select {
case <-ticker.C:
// We'll start off by making sure a new IP address has
// been detected.
ip, err := s.natTraversal.ExternalIP()
if err != nil {
srvrLog.Debugf("Unable to retrieve the "+
"external IP address: %v", err)
continue
}
// Periodically renew the NAT port forwarding.
for _, port := range forwardedPorts {
err := s.natTraversal.AddPortMapping(port)
if err != nil {
srvrLog.Warnf("Unable to automatically "+
"re-create port forwarding using %s: %v",
s.natTraversal.Name(), err)
} else {
srvrLog.Debugf("Automatically re-created "+
"forwarding for port %d using %s to "+
"advertise external IP",
port, s.natTraversal.Name())
}
}
if ip.Equal(s.lastDetectedIP) {
continue
}
srvrLog.Infof("Detected new external IP address %s", ip)
// Next, we'll craft the new addresses that will be
// included in the new node announcement and advertised
// to the network. Each address will consist of the new
// IP detected and one of the currently advertised
// ports.
var newAddrs []net.Addr
for _, port := range forwardedPorts {
hostIP := fmt.Sprintf("%v:%d", ip, port)
addr, err := net.ResolveTCPAddr("tcp", hostIP)
if err != nil {
srvrLog.Debugf("Unable to resolve "+
"host %v: %v", addr, err)
continue
}
newAddrs = append(newAddrs, addr)
}
// Skip the update if we weren't able to resolve any of
// the new addresses.
if len(newAddrs) == 0 {
srvrLog.Debug("Skipping node announcement " +
"update due to not being able to " +
"resolve any new addresses")
continue
}
// Now, we'll need to update the addresses in our node's
2018-09-06 11:48:46 +03:00
// announcement in order to propagate the update
// throughout the network. We'll only include addresses
// that have a different IP from the previous one, as
// the previous IP is no longer valid.
currentNodeAnn, err := s.genNodeAnnouncement(false)
if err != nil {
srvrLog.Debugf("Unable to retrieve current "+
"node announcement: %v", err)
continue
}
for _, addr := range currentNodeAnn.Addresses {
host, _, err := net.SplitHostPort(addr.String())
if err != nil {
srvrLog.Debugf("Unable to determine "+
"host from address %v: %v",
addr, err)
continue
}
// We'll also make sure to include external IPs
// set manually by the user.
_, setByUser := ipsSetByUser[addr.String()]
if setByUser || host != s.lastDetectedIP.String() {
newAddrs = append(newAddrs, addr)
}
}
// Then, we'll generate a new timestamped node
// announcement with the updated addresses and broadcast
// it to our peers.
newNodeAnn, err := s.genNodeAnnouncement(
true, lnwire.UpdateNodeAnnAddrs(newAddrs),
)
if err != nil {
srvrLog.Debugf("Unable to generate new node "+
"announcement: %v", err)
continue
}
err = s.BroadcastMessage(nil, &newNodeAnn)
if err != nil {
srvrLog.Debugf("Unable to broadcast new node "+
"announcement to peers: %v", err)
continue
}
// Finally, update the last IP seen to the current one.
s.lastDetectedIP = ip
case <-s.quit:
break out
}
}
}
// initNetworkBootstrappers initializes a set of network peer bootstrappers
// based on the server, and currently active bootstrap mechanisms as defined
// within the current configuration.
func initNetworkBootstrappers(s *server) ([]discovery.NetworkPeerBootstrapper, error) {
srvrLog.Infof("Initializing peer network bootstrappers!")
var bootStrappers []discovery.NetworkPeerBootstrapper
// First, we'll create an instance of the ChannelGraphBootstrapper as
// this can be used by default if we've already partially seeded the
// network.
chanGraph := autopilot.ChannelGraphFromDatabase(s.chanDB.ChannelGraph())
graphBootstrapper, err := discovery.NewGraphBootstrapper(chanGraph)
if err != nil {
return nil, err
}
bootStrappers = append(bootStrappers, graphBootstrapper)
// If this isn't simnet mode, then one of our additional bootstrapping
// sources will be the set of running DNS seeds.
if !cfg.Bitcoin.SimNet || !cfg.Litecoin.SimNet {
dnsSeeds, ok := chainDNSSeeds[*activeNetParams.GenesisHash]
// If we have a set of DNS seeds for this chain, then we'll add
// it as an additional bootstrapping source.
if ok {
srvrLog.Infof("Creating DNS peer bootstrapper with "+
"seeds: %v", dnsSeeds)
dnsBootStrapper := discovery.NewDNSSeedBootstrapper(
dnsSeeds, cfg.net,
)
bootStrappers = append(bootStrappers, dnsBootStrapper)
}
}
return bootStrappers, nil
}
// peerBootstrapper is a goroutine which is tasked with attempting to establish
// and maintain a target minimum number of outbound connections. With this
// invariant, we ensure that our node is connected to a diverse set of peers
// and that nodes newly joining the network receive an up to date network view
// as soon as possible.
func (s *server) peerBootstrapper(numTargetPeers uint32,
bootstrappers []discovery.NetworkPeerBootstrapper) {
defer s.wg.Done()
// ignore is a set used to keep track of peers already retrieved from
// our bootstrappers in order to avoid duplicates.
ignore := make(map[autopilot.NodeID]struct{})
// We'll start off by aggressively attempting connections to peers in
// order to be a part of the network as soon as possible.
s.initialPeerBootstrap(ignore, numTargetPeers, bootstrappers)
// Once done, we'll attempt to maintain our target minimum number of
// peers.
//
// We'll use a 15 second backoff, and double the time every time an
// epoch fails up to a ceiling.
const backOffCeiling = time.Minute * 5
backOff := time.Second * 15
// We'll create a new ticker to wake us up every 15 seconds so we can
// see if we've reached our minimum number of peers.
sampleTicker := time.NewTicker(backOff)
defer sampleTicker.Stop()
// We'll use the number of attempts and errors to determine if we need
// to increase the time between discovery epochs.
var epochErrors uint32 // To be used atomically.
var epochAttempts uint32
for {
select {
// The ticker has just woken us up, so we'll need to check if
// we need to attempt to connect our to any more peers.
case <-sampleTicker.C:
// Obtain the current number of peers, so we can gauge
// if we need to sample more peers or not.
s.mu.RLock()
numActivePeers := uint32(len(s.peersByPub))
s.mu.RUnlock()
// If we have enough peers, then we can loop back
// around to the next round as we're done here.
if numActivePeers >= numTargetPeers {
continue
}
// If all of our attempts failed during this last back
// off period, then will increase our backoff to 5
// minute ceiling to avoid an excessive number of
// queries
//
// TODO(roasbeef): add reverse policy too?
if epochAttempts > 0 &&
atomic.LoadUint32(&epochErrors) >= epochAttempts {
sampleTicker.Stop()
backOff *= 2
if backOff > backOffCeiling {
backOff = backOffCeiling
}
srvrLog.Debugf("Backing off peer bootstrapper to "+
"%v", backOff)
sampleTicker = time.NewTicker(backOff)
continue
}
atomic.StoreUint32(&epochErrors, 0)
epochAttempts = 0
// Since we know need more peers, we'll compute the
// exact number we need to reach our threshold.
numNeeded := numTargetPeers - numActivePeers
srvrLog.Debugf("Attempting to obtain %v more network "+
"peers", numNeeded)
// With the number of peers we need calculated, we'll
// query the network bootstrappers to sample a set of
// random addrs for us.
s.mu.RLock()
ignoreList := make(map[autopilot.NodeID]struct{})
for _, peer := range s.peersByPub {
nID := autopilot.NewNodeID(peer.addr.IdentityKey)
ignoreList[nID] = struct{}{}
}
s.mu.RUnlock()
peerAddrs, err := discovery.MultiSourceBootstrap(
ignoreList, numNeeded*2, bootstrappers...,
)
if err != nil {
srvrLog.Errorf("Unable to retrieve bootstrap "+
"peers: %v", err)
continue
}
// Finally, we'll launch a new goroutine for each
// prospective peer candidates.
for _, addr := range peerAddrs {
2017-09-04 03:04:53 +03:00
epochAttempts++
go func(a *lnwire.NetAddress) {
// TODO(roasbeef): can do AS, subnet,
// country diversity, etc
errChan := make(chan error, 1)
s.connectToPeer(a, errChan)
select {
case err := <-errChan:
if err == nil {
return
}
srvrLog.Errorf("Unable to "+
"connect to %v: %v",
a, err)
atomic.AddUint32(&epochErrors, 1)
case <-s.quit:
}
}(addr)
}
case <-s.quit:
return
}
}
}
// initialPeerBootstrap attempts to continuously connect to peers on startup
// until the target number of peers has been reached. This ensures that nodes
// receive an up to date network view as soon as possible.
func (s *server) initialPeerBootstrap(ignore map[autopilot.NodeID]struct{},
numTargetPeers uint32, bootstrappers []discovery.NetworkPeerBootstrapper) {
var wg sync.WaitGroup
for {
// Check if the server has been requested to shut down in order
// to prevent blocking.
if s.Stopped() {
return
}
// We can exit our aggressive initial peer bootstrapping stage
// if we've reached out target number of peers.
s.mu.RLock()
numActivePeers := uint32(len(s.peersByPub))
s.mu.RUnlock()
if numActivePeers >= numTargetPeers {
return
}
// Otherwise, we'll request for the remaining number of peers in
// order to reach our target.
peersNeeded := numTargetPeers - numActivePeers
bootstrapAddrs, err := discovery.MultiSourceBootstrap(
ignore, peersNeeded, bootstrappers...,
)
if err != nil {
srvrLog.Errorf("Unable to retrieve initial bootstrap "+
"peers: %v", err)
continue
}
// Then, we'll attempt to establish a connection to the
// different peer addresses retrieved by our bootstrappers.
for _, bootstrapAddr := range bootstrapAddrs {
wg.Add(1)
go func(addr *lnwire.NetAddress) {
defer wg.Done()
errChan := make(chan error, 1)
go s.connectToPeer(addr, errChan)
// We'll only allow this connection attempt to
// take up to 3 seconds. This allows us to move
// quickly by discarding peers that are slowing
// us down.
select {
case err := <-errChan:
if err == nil {
return
}
srvrLog.Errorf("Unable to connect to "+
"%v: %v", addr, err)
// TODO: tune timeout? 3 seconds might be *too*
// aggressive but works well.
case <-time.After(3 * time.Second):
srvrLog.Tracef("Skipping peer %v due "+
"to not establishing a "+
"connection within 3 seconds",
addr)
case <-s.quit:
}
}(bootstrapAddr)
}
wg.Wait()
}
}
// initTorController initiliazes the Tor controller backed by lnd and
// automatically sets up a v2 onion service in order to listen for inbound
// connections over Tor.
func (s *server) initTorController() error {
if err := s.torController.Start(); err != nil {
return err
}
// Determine the different ports the server is listening on. The onion
// service's virtual port will map to these ports and one will be picked
// at random when the onion service is being accessed.
listenPorts := make([]int, 0, len(s.listenAddrs))
for _, listenAddr := range s.listenAddrs {
port := listenAddr.(*net.TCPAddr).Port
listenPorts = append(listenPorts, port)
}
// Once the port mapping has been set, we can go ahead and automatically
// create our onion service. The service's private key will be saved to
// disk in order to regain access to this service when restarting `lnd`.
onionCfg := tor.AddOnionConfig{
VirtualPort: defaultPeerPort,
TargetPorts: listenPorts,
PrivateKeyPath: cfg.Tor.PrivateKeyPath,
}
switch {
case cfg.Tor.V2:
onionCfg.Type = tor.V2
case cfg.Tor.V3:
onionCfg.Type = tor.V3
}
addr, err := s.torController.AddOnion(onionCfg)
if err != nil {
return err
}
// Now that the onion service has been created, we'll add the onion
// address it can be reached at to our list of advertised addresses.
newNodeAnn, err := s.genNodeAnnouncement(
true, func(currentAnn *lnwire.NodeAnnouncement) {
currentAnn.Addresses = append(currentAnn.Addresses, addr)
},
)
if err != nil {
return fmt.Errorf("Unable to generate new node "+
"announcement: %v", err)
}
// Finally, we'll update the on-disk version of our announcement so it
// will eventually propagate to nodes in the network.
selfNode := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(int64(newNodeAnn.Timestamp), 0),
Addresses: newNodeAnn.Addresses,
Alias: newNodeAnn.Alias.String(),
Features: lnwire.NewFeatureVector(
newNodeAnn.Features, lnwire.GlobalFeatures,
),
Color: newNodeAnn.RGBColor,
AuthSigBytes: newNodeAnn.Signature.ToSignatureBytes(),
}
copy(selfNode.PubKeyBytes[:], s.identityPriv.PubKey().SerializeCompressed())
if err := s.chanDB.ChannelGraph().SetSourceNode(selfNode); err != nil {
return fmt.Errorf("can't set self node: %v", err)
}
return nil
}
// genNodeAnnouncement generates and returns the current fully signed node
// announcement. If refresh is true, then the time stamp of the announcement
// will be updated in order to ensure it propagates through the network.
func (s *server) genNodeAnnouncement(refresh bool,
updates ...func(*lnwire.NodeAnnouncement)) (lnwire.NodeAnnouncement, error) {
s.mu.Lock()
defer s.mu.Unlock()
// If we don't need to refresh the announcement, then we can return a
// copy of our cached version.
if !refresh {
return *s.currentNodeAnn, nil
}
// Now that we know we need to update our copy, we'll apply all the
// function updates that'll mutate the current version of our node
// announcement.
for _, update := range updates {
update(s.currentNodeAnn)
}
// We'll now update the timestamp, ensuring that with each update, the
// timestamp monotonically increases.
newStamp := uint32(time.Now().Unix())
if newStamp <= s.currentNodeAnn.Timestamp {
newStamp = s.currentNodeAnn.Timestamp + 1
}
s.currentNodeAnn.Timestamp = newStamp
// Now that the announcement is fully updated, we'll generate a new
// signature over the announcement to ensure nodes on the network
// accepted the new authenticated announcement.
sig, err := discovery.SignAnnouncement(
s.nodeSigner, s.identityPriv.PubKey(), s.currentNodeAnn,
)
if err != nil {
return lnwire.NodeAnnouncement{}, err
}
s.currentNodeAnn.Signature, err = lnwire.NewSigFromSignature(sig)
if err != nil {
return lnwire.NodeAnnouncement{}, err
}
return *s.currentNodeAnn, nil
}
type nodeAddresses struct {
pubKey *btcec.PublicKey
addresses []net.Addr
}
// establishPersistentConnections attempts to establish persistent connections
// to all our direct channel collaborators. In order to promote liveness of our
// active channels, we instruct the connection manager to attempt to establish
// and maintain persistent connections to all our direct channel counterparties.
func (s *server) establishPersistentConnections() error {
// nodeAddrsMap stores the combination of node public keys and addresses
// that we'll attempt to reconnect to. PubKey strings are used as keys
// since other PubKey forms can't be compared.
nodeAddrsMap := map[string]*nodeAddresses{}
// Iterate through the list of LinkNodes to find addresses we should
// attempt to connect to based on our set of previous connections. Set
// the reconnection port to the default peer port.
linkNodes, err := s.chanDB.FetchAllLinkNodes()
if err != nil && err != channeldb.ErrLinkNodesNotFound {
return err
}
for _, node := range linkNodes {
pubStr := string(node.IdentityPub.SerializeCompressed())
nodeAddrs := &nodeAddresses{
pubKey: node.IdentityPub,
addresses: node.Addresses,
}
nodeAddrsMap[pubStr] = nodeAddrs
}
// After checking our previous connections for addresses to connect to,
// iterate through the nodes in our channel graph to find addresses
// that have been added via NodeAnnouncement messages.
chanGraph := s.chanDB.ChannelGraph()
sourceNode, err := chanGraph.SourceNode()
if err != nil {
return err
}
// TODO(roasbeef): instead iterate over link nodes and query graph for
// each of the nodes.
selfPub := s.identityPriv.PubKey().SerializeCompressed()
err = sourceNode.ForEachChannel(nil, func(
tx *bbolt.Tx,
chanInfo *channeldb.ChannelEdgeInfo,
policy, _ *channeldb.ChannelEdgePolicy) error {
// If the remote party has announced the channel to us, but we
// haven't yet, then we won't have a policy. However, we don't
// need this to connect to the peer, so we'll log it and move on.
if policy == nil {
srvrLog.Warnf("No channel policy found for "+
"ChannelPoint(%v): ", chanInfo.ChannelPoint)
}
// We'll now fetch the peer opposite from us within this
// channel so we can queue up a direct connection to them.
channelPeer, err := chanInfo.FetchOtherNode(tx, selfPub)
if err != nil {
return fmt.Errorf("unable to fetch channel peer for "+
"ChannelPoint(%v): %v", chanInfo.ChannelPoint,
err)
}
pubStr := string(channelPeer.PubKeyBytes[:])
// Add all unique addresses from channel
// graph/NodeAnnouncements to the list of addresses we'll
// connect to for this peer.
addrSet := make(map[string]net.Addr)
for _, addr := range channelPeer.Addresses {
switch addr.(type) {
case *net.TCPAddr:
addrSet[addr.String()] = addr
// We'll only attempt to connect to Tor addresses if Tor
// outbound support is enabled.
case *tor.OnionAddr:
if cfg.Tor.Active {
addrSet[addr.String()] = addr
}
}
}
// If this peer is also recorded as a link node, we'll add any
// additional addresses that have not already been selected.
linkNodeAddrs, ok := nodeAddrsMap[pubStr]
if ok {
for _, lnAddress := range linkNodeAddrs.addresses {
switch lnAddress.(type) {
case *net.TCPAddr:
addrSet[lnAddress.String()] = lnAddress
// We'll only attempt to connect to Tor
// addresses if Tor outbound support is enabled.
case *tor.OnionAddr:
if cfg.Tor.Active {
addrSet[lnAddress.String()] = lnAddress
}
}
}
}
// Construct a slice of the deduped addresses.
var addrs []net.Addr
for _, addr := range addrSet {
addrs = append(addrs, addr)
}
n := &nodeAddresses{
addresses: addrs,
}
n.pubKey, err = channelPeer.PubKey()
if err != nil {
return err
}
nodeAddrsMap[pubStr] = n
return nil
})
if err != nil && err != channeldb.ErrGraphNoEdgesFound {
return err
}
// Acquire and hold server lock until all persistent connection requests
// have been recorded and sent to the connection manager.
s.mu.Lock()
defer s.mu.Unlock()
// Iterate through the combined list of addresses from prior links and
// node announcements and attempt to reconnect to each node.
var numOutboundConns int
for pubStr, nodeAddr := range nodeAddrsMap {
// Add this peer to the set of peers we should maintain a
// persistent connection with.
s.persistentPeers[pubStr] = struct{}{}
if _, ok := s.persistentPeersBackoff[pubStr]; !ok {
s.persistentPeersBackoff[pubStr] = cfg.MinBackoff
}
for _, address := range nodeAddr.addresses {
// Create a wrapper address which couples the IP and
// the pubkey so the brontide authenticated connection
// can be established.
lnAddr := &lnwire.NetAddress{
IdentityKey: nodeAddr.pubKey,
Address: address,
}
srvrLog.Debugf("Attempting persistent connection to "+
"channel peer %v", lnAddr)
// Send the persistent connection request to the
// connection manager, saving the request itself so we
// can cancel/restart the process as needed.
connReq := &connmgr.ConnReq{
Addr: lnAddr,
Permanent: true,
}
s.persistentConnReqs[pubStr] = append(
s.persistentConnReqs[pubStr], connReq)
// We'll connect to the first 10 peers immediately, then
// randomly stagger any remaining connections if the
// stagger initial reconnect flag is set. This ensures
// that mobile nodes or nodes with a small number of
// channels obtain connectivity quickly, but larger
// nodes are able to disperse the costs of connecting to
// all peers at once.
if numOutboundConns < numInstantInitReconnect ||
!cfg.StaggerInitialReconnect {
go s.connMgr.Connect(connReq)
} else {
go s.delayInitialReconnect(connReq)
}
}
numOutboundConns++
}
return nil
}
// delayInitialReconnect will attempt a reconnection using the passed connreq
// after sampling a value for the delay between 0s and the
// maxInitReconnectDelay.
//
// NOTE: This method MUST be run as a goroutine.
func (s *server) delayInitialReconnect(connReq *connmgr.ConnReq) {
delay := time.Duration(prand.Intn(maxInitReconnectDelay)) * time.Second
select {
case <-time.After(delay):
s.connMgr.Connect(connReq)
case <-s.quit:
}
}
// prunePersistentPeerConnection removes all internal state related to
// persistent connections to a peer within the server. This is used to avoid
// persistent connection retries to peers we do not have any open channels with.
func (s *server) prunePersistentPeerConnection(compressedPubKey [33]byte) {
srvrLog.Infof("Pruning peer %x from persistent connections, number of "+
"open channels is now zero", compressedPubKey)
pubKeyStr := string(compressedPubKey[:])
s.mu.Lock()
delete(s.persistentPeers, pubKeyStr)
delete(s.persistentPeersBackoff, pubKeyStr)
s.cancelConnReqs(pubKeyStr, nil)
s.mu.Unlock()
}
// BroadcastMessage sends a request to the server to broadcast a set of
// messages to all peers other than the one specified by the `skips` parameter.
// All messages sent via BroadcastMessage will be queued for lazy delivery to
// the target peers.
//
// NOTE: This function is safe for concurrent access.
func (s *server) BroadcastMessage(skips map[route.Vertex]struct{},
msgs ...lnwire.Message) error {
srvrLog.Debugf("Broadcasting %v messages", len(msgs))
// Filter out peers found in the skips map. We synchronize access to
// peersByPub throughout this process to ensure we deliver messages to
// exact set of peers present at the time of invocation.
s.mu.RLock()
peers := make([]*peer, 0, len(s.peersByPub))
for _, sPeer := range s.peersByPub {
if skips != nil {
if _, ok := skips[sPeer.pubKeyBytes]; ok {
srvrLog.Tracef("Skipping %x in broadcast",
sPeer.pubKeyBytes[:])
continue
}
}
peers = append(peers, sPeer)
}
s.mu.RUnlock()
// Iterate over all known peers, dispatching a go routine to enqueue
// all messages to each of peers.
var wg sync.WaitGroup
for _, sPeer := range peers {
// Dispatch a go routine to enqueue all messages to this peer.
wg.Add(1)
s.wg.Add(1)
go func(p lnpeer.Peer) {
defer s.wg.Done()
defer wg.Done()
p.SendMessageLazy(false, msgs...)
}(sPeer)
}
// Wait for all messages to have been dispatched before returning to
// caller.
wg.Wait()
return nil
}
// NotifyWhenOnline can be called by other subsystems to get notified when a
// particular peer comes online. The peer itself is sent across the peerChan.
//
// NOTE: This function is safe for concurrent access.
func (s *server) NotifyWhenOnline(peerKey *btcec.PublicKey,
peerChan chan<- lnpeer.Peer) {
s.mu.Lock()
defer s.mu.Unlock()
// Compute the target peer's identifier.
pubStr := string(peerKey.SerializeCompressed())
// Check if peer is connected.
peer, ok := s.peersByPub[pubStr]
if ok {
// Connected, can return early.
srvrLog.Debugf("Notifying that peer %x is online",
peerKey.SerializeCompressed())
select {
case peerChan <- peer:
case <-s.quit:
}
return
}
// Not connected, store this listener such that it can be notified when
// the peer comes online.
s.peerConnectedListeners[pubStr] = append(
s.peerConnectedListeners[pubStr], peerChan,
)
}
// NotifyWhenOffline delivers a notification to the caller of when the peer with
// the given public key has been disconnected. The notification is signaled by
// closing the channel returned.
func (s *server) NotifyWhenOffline(peerPubKey [33]byte) <-chan struct{} {
s.mu.Lock()
defer s.mu.Unlock()
c := make(chan struct{})
// If the peer is already offline, we can immediately trigger the
// notification.
peerPubKeyStr := string(peerPubKey[:])
if _, ok := s.peersByPub[peerPubKeyStr]; !ok {
srvrLog.Debugf("Notifying that peer %x is offline", peerPubKey)
close(c)
return c
}
// Otherwise, the peer is online, so we'll keep track of the channel to
// trigger the notification once the server detects the peer
// disconnects.
s.peerDisconnectedListeners[peerPubKeyStr] = append(
s.peerDisconnectedListeners[peerPubKeyStr], c,
)
return c
}
// FindPeer will return the peer that corresponds to the passed in public key.
// This function is used by the funding manager, allowing it to update the
// daemon's local representation of the remote peer.
//
// NOTE: This function is safe for concurrent access.
func (s *server) FindPeer(peerKey *btcec.PublicKey) (*peer, error) {
s.mu.RLock()
defer s.mu.RUnlock()
pubStr := string(peerKey.SerializeCompressed())
return s.findPeerByPubStr(pubStr)
}
// FindPeerByPubStr will return the peer that corresponds to the passed peerID,
// which should be a string representation of the peer's serialized, compressed
// public key.
//
// NOTE: This function is safe for concurrent access.
func (s *server) FindPeerByPubStr(pubStr string) (*peer, error) {
s.mu.RLock()
defer s.mu.RUnlock()
return s.findPeerByPubStr(pubStr)
}
// findPeerByPubStr is an internal method that retrieves the specified peer from
// the server's internal state using.
func (s *server) findPeerByPubStr(pubStr string) (*peer, error) {
peer, ok := s.peersByPub[pubStr]
if !ok {
return nil, ErrPeerNotConnected
}
return peer, nil
}
// nextPeerBackoff computes the next backoff duration for a peer's pubkey using
// exponential backoff. If no previous backoff was known, the default is
// returned.
func (s *server) nextPeerBackoff(pubStr string,
startTime time.Time) time.Duration {
// Now, determine the appropriate backoff to use for the retry.
backoff, ok := s.persistentPeersBackoff[pubStr]
if !ok {
// If an existing backoff was unknown, use the default.
return cfg.MinBackoff
}
// If the peer failed to start properly, we'll just use the previous
// backoff to compute the subsequent randomized exponential backoff
// duration. This will roughly double on average.
if startTime.IsZero() {
return computeNextBackoff(backoff)
}
// The peer succeeded in starting. If the connection didn't last long
// enough to be considered stable, we'll continue to back off retries
// with this peer.
connDuration := time.Now().Sub(startTime)
if connDuration < defaultStableConnDuration {
return computeNextBackoff(backoff)
}
// The peer succeed in starting and this was stable peer, so we'll
// reduce the timeout duration by the length of the connection after
// applying randomized exponential backoff. We'll only apply this in the
// case that:
// reb(curBackoff) - connDuration > cfg.MinBackoff
relaxedBackoff := computeNextBackoff(backoff) - connDuration
if relaxedBackoff > cfg.MinBackoff {
return relaxedBackoff
}
// Lastly, if reb(currBackoff) - connDuration <= cfg.MinBackoff, meaning
// the stable connection lasted much longer than our previous backoff.
// To reward such good behavior, we'll reconnect after the default
// timeout.
return cfg.MinBackoff
}
// shouldDropConnection determines if our local connection to a remote peer
// should be dropped in the case of concurrent connection establishment. In
// order to deterministically decide which connection should be dropped, we'll
// utilize the ordering of the local and remote public key. If we didn't use
// such a tie breaker, then we risk _both_ connections erroneously being
// dropped.
func shouldDropLocalConnection(local, remote *btcec.PublicKey) bool {
localPubBytes := local.SerializeCompressed()
remotePubPbytes := remote.SerializeCompressed()
// The connection that comes from the node with a "smaller" pubkey
// should be kept. Therefore, if our pubkey is "greater" than theirs, we
// should drop our established connection.
return bytes.Compare(localPubBytes, remotePubPbytes) > 0
}
// InboundPeerConnected initializes a new peer in response to a new inbound
// connection.
//
// NOTE: This function is safe for concurrent access.
func (s *server) InboundPeerConnected(conn net.Conn) {
// Exit early if we have already been instructed to shutdown, this
// prevents any delayed callbacks from accidentally registering peers.
if s.Stopped() {
return
}
nodePub := conn.(*brontide.Conn).RemotePub()
pubStr := string(nodePub.SerializeCompressed())
s.mu.Lock()
defer s.mu.Unlock()
// If we already have an outbound connection to this peer, then ignore
// this new connection.
if _, ok := s.outboundPeers[pubStr]; ok {
srvrLog.Debugf("Already have outbound connection for %x, "+
"ignoring inbound connection",
nodePub.SerializeCompressed())
conn.Close()
return
}
// If we already have a valid connection that is scheduled to take
// precedence once the prior peer has finished disconnecting, we'll
// ignore this connection.
if _, ok := s.scheduledPeerConnection[pubStr]; ok {
srvrLog.Debugf("Ignoring connection, peer already scheduled")
conn.Close()
return
}
srvrLog.Infof("New inbound connection from %v", conn.RemoteAddr())
// Check to see if we already have a connection with this peer. If so,
// we may need to drop our existing connection. This prevents us from
// having duplicate connections to the same peer. We forgo adding a
// default case as we expect these to be the only error values returned
// from findPeerByPubStr.
connectedPeer, err := s.findPeerByPubStr(pubStr)
switch err {
case ErrPeerNotConnected:
// We were unable to locate an existing connection with the
// target peer, proceed to connect.
s.cancelConnReqs(pubStr, nil)
s.peerConnected(conn, nil, true)
case nil:
// We already have a connection with the incoming peer. If the
// connection we've already established should be kept and is
// not of the same type of the new connection (inbound), then
// we'll close out the new connection s.t there's only a single
// connection between us.
localPub := s.identityPriv.PubKey()
if !connectedPeer.inbound &&
!shouldDropLocalConnection(localPub, nodePub) {
srvrLog.Warnf("Received inbound connection from "+
"peer %v, but already have outbound "+
"connection, dropping conn", connectedPeer)
conn.Close()
return
}
// Otherwise, if we should drop the connection, then we'll
// disconnect our already connected peer.
srvrLog.Debugf("Disconnecting stale connection to %v",
connectedPeer)
s.cancelConnReqs(pubStr, nil)
// Remove the current peer from the server's internal state and
// signal that the peer termination watcher does not need to
// execute for this peer.
s.removePeer(connectedPeer)
s.ignorePeerTermination[connectedPeer] = struct{}{}
s.scheduledPeerConnection[pubStr] = func() {
s.peerConnected(conn, nil, true)
}
}
}
// OutboundPeerConnected initializes a new peer in response to a new outbound
// connection.
// NOTE: This function is safe for concurrent access.
func (s *server) OutboundPeerConnected(connReq *connmgr.ConnReq, conn net.Conn) {
// Exit early if we have already been instructed to shutdown, this
// prevents any delayed callbacks from accidentally registering peers.
if s.Stopped() {
return
}
nodePub := conn.(*brontide.Conn).RemotePub()
pubStr := string(nodePub.SerializeCompressed())
s.mu.Lock()
defer s.mu.Unlock()
// If we already have an inbound connection to this peer, then ignore
// this new connection.
if _, ok := s.inboundPeers[pubStr]; ok {
srvrLog.Debugf("Already have inbound connection for %x, "+
"ignoring outbound connection",
nodePub.SerializeCompressed())
if connReq != nil {
s.connMgr.Remove(connReq.ID())
}
conn.Close()
return
}
if _, ok := s.persistentConnReqs[pubStr]; !ok && connReq != nil {
srvrLog.Debugf("Ignoring cancelled outbound connection")
s.connMgr.Remove(connReq.ID())
conn.Close()
return
}
// If we already have a valid connection that is scheduled to take
// precedence once the prior peer has finished disconnecting, we'll
// ignore this connection.
if _, ok := s.scheduledPeerConnection[pubStr]; ok {
srvrLog.Debugf("Ignoring connection, peer already scheduled")
if connReq != nil {
s.connMgr.Remove(connReq.ID())
}
conn.Close()
return
}
2019-03-27 02:41:13 +03:00
srvrLog.Infof("Established connection to: %x@%v", pubStr,
conn.RemoteAddr())
if connReq != nil {
// A successful connection was returned by the connmgr.
// Immediately cancel all pending requests, excluding the
// outbound connection we just established.
ignore := connReq.ID()
s.cancelConnReqs(pubStr, &ignore)
} else {
// This was a successful connection made by some other
// subsystem. Remove all requests being managed by the connmgr.
s.cancelConnReqs(pubStr, nil)
}
// If we already have a connection with this peer, decide whether or not
// we need to drop the stale connection. We forgo adding a default case
// as we expect these to be the only error values returned from
// findPeerByPubStr.
connectedPeer, err := s.findPeerByPubStr(pubStr)
switch err {
case ErrPeerNotConnected:
// We were unable to locate an existing connection with the
// target peer, proceed to connect.
s.peerConnected(conn, connReq, false)
case nil:
// We already have a connection with the incoming peer. If the
// connection we've already established should be kept and is
// not of the same type of the new connection (outbound), then
// we'll close out the new connection s.t there's only a single
// connection between us.
localPub := s.identityPriv.PubKey()
if connectedPeer.inbound &&
shouldDropLocalConnection(localPub, nodePub) {
srvrLog.Warnf("Established outbound connection to "+
"peer %v, but already have inbound "+
"connection, dropping conn", connectedPeer)
if connReq != nil {
s.connMgr.Remove(connReq.ID())
}
conn.Close()
return
}
// Otherwise, _their_ connection should be dropped. So we'll
// disconnect the peer and send the now obsolete peer to the
// server for garbage collection.
srvrLog.Debugf("Disconnecting stale connection to %v",
connectedPeer)
// Remove the current peer from the server's internal state and
// signal that the peer termination watcher does not need to
// execute for this peer.
s.removePeer(connectedPeer)
s.ignorePeerTermination[connectedPeer] = struct{}{}
s.scheduledPeerConnection[pubStr] = func() {
s.peerConnected(conn, connReq, false)
}
}
}
// UnassignedConnID is the default connection ID that a request can have before
// it actually is submitted to the connmgr.
// TODO(conner): move into connmgr package, or better, add connmgr method for
// generating atomic IDs
const UnassignedConnID uint64 = 0
// cancelConnReqs stops all persistent connection requests for a given pubkey.
// Any attempts initiated by the peerTerminationWatcher are canceled first.
// Afterwards, each connection request removed from the connmgr. The caller can
// optionally specify a connection ID to ignore, which prevents us from
// canceling a successful request. All persistent connreqs for the provided
// pubkey are discarded after the operationjw.
func (s *server) cancelConnReqs(pubStr string, skip *uint64) {
// First, cancel any lingering persistent retry attempts, which will
// prevent retries for any with backoffs that are still maturing.
if cancelChan, ok := s.persistentRetryCancels[pubStr]; ok {
close(cancelChan)
delete(s.persistentRetryCancels, pubStr)
}
// Next, check to see if we have any outstanding persistent connection
// requests to this peer. If so, then we'll remove all of these
// connection requests, and also delete the entry from the map.
connReqs, ok := s.persistentConnReqs[pubStr]
if !ok {
return
}
for _, connReq := range connReqs {
// Atomically capture the current request identifier.
connID := connReq.ID()
// Skip any zero IDs, this indicates the request has not
// yet been schedule.
if connID == UnassignedConnID {
continue
}
// Skip a particular connection ID if instructed.
if skip != nil && connID == *skip {
continue
}
s.connMgr.Remove(connID)
}
delete(s.persistentConnReqs, pubStr)
}
// peerConnected is a function that handles initialization a newly connected
// peer by adding it to the server's global list of all active peers, and
// starting all the goroutines the peer needs to function properly. The inbound
// boolean should be true if the peer initiated the connection to us.
func (s *server) peerConnected(conn net.Conn, connReq *connmgr.ConnReq,
inbound bool) {
brontideConn := conn.(*brontide.Conn)
addr := conn.RemoteAddr()
pubKey := brontideConn.RemotePub()
2019-03-27 02:41:13 +03:00
srvrLog.Infof("Finalizing connection to %x@%s, inbound=%v",
pubKey.SerializeCompressed(), addr, inbound)
peerAddr := &lnwire.NetAddress{
IdentityKey: pubKey,
Address: addr,
ChainNet: activeNetParams.Net,
}
// With the brontide connection established, we'll now craft the local
// feature vector to advertise to the remote node.
localFeatures := lnwire.NewRawFeatureVector()
// We'll signal that we understand the data loss protection feature,
// and also that we support the new gossip query features.
localFeatures.Set(lnwire.DataLossProtectRequired)
localFeatures.Set(lnwire.GossipQueriesOptional)
// Now that we've established a connection, create a peer, and it to the
// set of currently active peers. Configure the peer with the incoming
// and outgoing broadcast deltas to prevent htlcs from being accepted or
// offered that would trigger channel closure. In case of outgoing
// htlcs, an extra block is added to prevent the channel from being
// closed when the htlc is outstanding and a new block comes in.
p, err := newPeer(
conn, connReq, s, peerAddr, inbound, localFeatures,
cfg.ChanEnableTimeout,
defaultFinalCltvRejectDelta,
defaultOutgoingCltvRejectDelta,
)
if err != nil {
srvrLog.Errorf("unable to create peer %v", err)
return
}
// TODO(roasbeef): update IP address for link-node
// * also mark last-seen, do it one single transaction?
s.addPeer(p)
// Dispatch a goroutine to asynchronously start the peer. This process
// includes sending and receiving Init messages, which would be a DOS
// vector if we held the server's mutex throughout the procedure.
s.wg.Add(1)
go s.peerInitializer(p)
}
// addPeer adds the passed peer to the server's global state of all active
// peers.
func (s *server) addPeer(p *peer) {
if p == nil {
return
}
// Ignore new peers if we're shutting down.
if s.Stopped() {
p.Disconnect(ErrServerShuttingDown)
return
}
// Track the new peer in our indexes so we can quickly look it up either
// according to its public key, or its peer ID.
// TODO(roasbeef): pipe all requests through to the
// queryHandler/peerManager
pubStr := string(p.addr.IdentityKey.SerializeCompressed())
s.peersByPub[pubStr] = p
if p.inbound {
s.inboundPeers[pubStr] = p
} else {
s.outboundPeers[pubStr] = p
}
}
// peerInitializer asynchronously starts a newly connected peer after it has
// been added to the server's peer map. This method sets up a
// peerTerminationWatcher for the given peer, and ensures that it executes even
// if the peer failed to start. In the event of a successful connection, this
// method reads the negotiated, local feature-bits and spawns the appropriate
// graph synchronization method. Any registered clients of NotifyWhenOnline will
// be signaled of the new peer once the method returns.
//
// NOTE: This MUST be launched as a goroutine.
func (s *server) peerInitializer(p *peer) {
defer s.wg.Done()
// Avoid initializing peers while the server is exiting.
if s.Stopped() {
return
}
// Create a channel that will be used to signal a successful start of
// the link. This prevents the peer termination watcher from beginning
// its duty too early.
ready := make(chan struct{})
// Before starting the peer, launch a goroutine to watch for the
// unexpected termination of this peer, which will ensure all resources
// are properly cleaned up, and re-establish persistent connections when
// necessary. The peer termination watcher will be short circuited if
// the peer is ever added to the ignorePeerTermination map, indicating
// that the server has already handled the removal of this peer.
s.wg.Add(1)
go s.peerTerminationWatcher(p, ready)
2018-09-06 11:48:46 +03:00
// Start the peer! If an error occurs, we Disconnect the peer, which
// will unblock the peerTerminationWatcher.
if err := p.Start(); err != nil {
p.Disconnect(fmt.Errorf("unable to start peer: %v", err))
return
}
// Otherwise, signal to the peerTerminationWatcher that the peer startup
// was successful, and to begin watching the peer's wait group.
close(ready)
pubStr := string(p.addr.IdentityKey.SerializeCompressed())
s.mu.Lock()
defer s.mu.Unlock()
// Check if there are listeners waiting for this peer to come online.
2019-03-27 02:41:13 +03:00
srvrLog.Debugf("Notifying that peer %v is online", p)
for _, peerChan := range s.peerConnectedListeners[pubStr] {
select {
case peerChan <- p:
case <-s.quit:
return
}
}
delete(s.peerConnectedListeners, pubStr)
}
// peerTerminationWatcher waits until a peer has been disconnected unexpectedly,
// and then cleans up all resources allocated to the peer, notifies relevant
// sub-systems of its demise, and finally handles re-connecting to the peer if
// it's persistent. If the server intentionally disconnects a peer, it should
// have a corresponding entry in the ignorePeerTermination map which will cause
// the cleanup routine to exit early. The passed `ready` chan is used to
// synchronize when WaitForDisconnect should begin watching on the peer's
// waitgroup. The ready chan should only be signaled if the peer starts
// successfully, otherwise the peer should be disconnected instead.
//
// NOTE: This MUST be launched as a goroutine.
func (s *server) peerTerminationWatcher(p *peer, ready chan struct{}) {
defer s.wg.Done()
p.WaitForDisconnect(ready)
srvrLog.Debugf("Peer %v has been disconnected", p)
// If the server is exiting then we can bail out early ourselves as all
// the other sub-systems will already be shutting down.
if s.Stopped() {
return
}
// Next, we'll cancel all pending funding reservations with this node.
// If we tried to initiate any funding flows that haven't yet finished,
// then we need to unlock those committed outputs so they're still
// available for use.
s.fundingMgr.CancelPeerReservations(p.PubKey())
pubKey := p.addr.IdentityKey
// We'll also inform the gossiper that this peer is no longer active,
// so we don't need to maintain sync state for it any longer.
s.authGossiper.PruneSyncState(p.PubKey())
// Tell the switch to remove all links associated with this peer.
// Passing nil as the target link indicates that all links associated
// with this interface should be closed.
//
// TODO(roasbeef): instead add a PurgeInterfaceLinks function?
links, err := p.server.htlcSwitch.GetLinksByInterface(p.pubKeyBytes)
if err != nil && err != htlcswitch.ErrNoLinksFound {
2019-03-27 02:41:13 +03:00
srvrLog.Errorf("Unable to get channel links for %v: %v", p, err)
}
for _, link := range links {
p.server.htlcSwitch.RemoveLink(link.ChanID())
}
s.mu.Lock()
defer s.mu.Unlock()
// If there were any notification requests for when this peer
// disconnected, we can trigger them now.
2019-03-27 02:41:13 +03:00
srvrLog.Debugf("Notifying that peer %x is offline", p)
pubStr := string(pubKey.SerializeCompressed())
for _, offlineChan := range s.peerDisconnectedListeners[pubStr] {
close(offlineChan)
}
delete(s.peerDisconnectedListeners, pubStr)
// If the server has already removed this peer, we can short circuit the
// peer termination watcher and skip cleanup.
if _, ok := s.ignorePeerTermination[p]; ok {
delete(s.ignorePeerTermination, p)
pubKey := p.PubKey()
pubStr := string(pubKey[:])
// If a connection callback is present, we'll go ahead and
// execute it now that previous peer has fully disconnected. If
// the callback is not present, this likely implies the peer was
// purposefully disconnected via RPC, and that no reconnect
// should be attempted.
connCallback, ok := s.scheduledPeerConnection[pubStr]
if ok {
delete(s.scheduledPeerConnection, pubStr)
connCallback()
}
return
}
// First, cleanup any remaining state the server has regarding the peer
// in question.
s.removePeer(p)
// Next, check to see if this is a persistent peer or not.
_, ok := s.persistentPeers[pubStr]
if ok {
// We'll only need to re-launch a connection request if one
// isn't already currently pending.
if _, ok := s.persistentConnReqs[pubStr]; ok {
return
}
// We'll ensure that we locate an advertised address to use
// within the peer's address for reconnection purposes.
//
// TODO(roasbeef): use them all?
if p.inbound {
advertisedAddr, err := s.fetchNodeAdvertisedAddr(
pubKey,
)
if err != nil {
srvrLog.Errorf("Unable to retrieve advertised "+
"address for node %x: %v",
pubKey.SerializeCompressed(), err)
} else {
p.addr.Address = advertisedAddr
}
}
// Otherwise, we'll launch a new connection request in order to
// attempt to maintain a persistent connection with this peer.
connReq := &connmgr.ConnReq{
Addr: p.addr,
Permanent: true,
}
s.persistentConnReqs[pubStr] = append(
s.persistentConnReqs[pubStr], connReq)
// Record the computed backoff in the backoff map.
backoff := s.nextPeerBackoff(pubStr, p.StartTime())
s.persistentPeersBackoff[pubStr] = backoff
// Initialize a retry canceller for this peer if one does not
// exist.
cancelChan, ok := s.persistentRetryCancels[pubStr]
if !ok {
cancelChan = make(chan struct{})
s.persistentRetryCancels[pubStr] = cancelChan
}
// We choose not to wait group this go routine since the Connect
// call can stall for arbitrarily long if we shutdown while an
// outbound connection attempt is being made.
go func() {
srvrLog.Debugf("Scheduling connection re-establishment to "+
"persistent peer %v in %s", p, backoff)
select {
case <-time.After(backoff):
case <-cancelChan:
return
case <-s.quit:
return
}
srvrLog.Debugf("Attempting to re-establish persistent "+
"connection to peer %v", p)
s.connMgr.Connect(connReq)
}()
}
}
// removePeer removes the passed peer from the server's state of all active
// peers.
func (s *server) removePeer(p *peer) {
if p == nil {
return
}
srvrLog.Debugf("removing peer %v", p)
// As the peer is now finished, ensure that the TCP connection is
// closed and all of its related goroutines have exited.
p.Disconnect(fmt.Errorf("server: disconnecting peer %v", p))
// If this peer had an active persistent connection request, remove it.
if p.connReq != nil {
s.connMgr.Remove(p.connReq.ID())
}
// Ignore deleting peers if we're shutting down.
if s.Stopped() {
return
}
pubStr := string(p.addr.IdentityKey.SerializeCompressed())
delete(s.peersByPub, pubStr)
if p.inbound {
delete(s.inboundPeers, pubStr)
} else {
delete(s.outboundPeers, pubStr)
}
}
// openChanReq is a message sent to the server in order to request the
// initiation of a channel funding workflow to the peer with either the
// specified relative peer ID, or a global lightning ID.
type openChanReq struct {
targetPubkey *btcec.PublicKey
chainHash chainhash.Hash
localFundingAmt btcutil.Amount
remoteFundingAmt btcutil.Amount
pushAmt lnwire.MilliSatoshi
fundingFeePerKw lnwallet.SatPerKWeight
private bool
minHtlc lnwire.MilliSatoshi
remoteCsvDelay uint16
// minConfs indicates the minimum number of confirmations that each
// output selected to fund the channel should satisfy.
minConfs int32
// TODO(roasbeef): add ability to specify channel constraints as well
updates chan *lnrpc.OpenStatusUpdate
err chan error
}
// ConnectToPeer requests that the server connect to a Lightning Network peer
// at the specified address. This function will *block* until either a
// connection is established, or the initial handshake process fails.
//
// NOTE: This function is safe for concurrent access.
func (s *server) ConnectToPeer(addr *lnwire.NetAddress, perm bool) error {
targetPub := string(addr.IdentityKey.SerializeCompressed())
// Acquire mutex, but use explicit unlocking instead of defer for
// better granularity. In certain conditions, this method requires
// making an outbound connection to a remote peer, which requires the
// lock to be released, and subsequently reacquired.
s.mu.Lock()
// Ensure we're not already connected to this peer.
peer, err := s.findPeerByPubStr(targetPub)
if err == nil {
s.mu.Unlock()
return &errPeerAlreadyConnected{peer: peer}
}
// Peer was not found, continue to pursue connection with peer.
// If there's already a pending connection request for this pubkey,
// then we ignore this request to ensure we don't create a redundant
// connection.
if reqs, ok := s.persistentConnReqs[targetPub]; ok {
srvrLog.Warnf("Already have %d persistent connection "+
2019-03-27 02:41:13 +03:00
"requests for %x@%v, connecting anyway.", len(reqs),
targetPub, addr)
}
// If there's not already a pending or active connection to this node,
// then instruct the connection manager to attempt to establish a
// persistent connection to the peer.
2019-03-27 02:41:13 +03:00
srvrLog.Debugf("Connecting to %x@%v", targetPub, addr)
if perm {
connReq := &connmgr.ConnReq{
Addr: addr,
Permanent: true,
}
s.persistentPeers[targetPub] = struct{}{}
if _, ok := s.persistentPeersBackoff[targetPub]; !ok {
s.persistentPeersBackoff[targetPub] = cfg.MinBackoff
}
s.persistentConnReqs[targetPub] = append(
s.persistentConnReqs[targetPub], connReq,
)
s.mu.Unlock()
go s.connMgr.Connect(connReq)
return nil
}
s.mu.Unlock()
// If we're not making a persistent connection, then we'll attempt to
// connect to the target peer. If the we can't make the connection, or
// the crypto negotiation breaks down, then return an error to the
// caller.
errChan := make(chan error, 1)
s.connectToPeer(addr, errChan)
select {
case err := <-errChan:
return err
case <-s.quit:
return ErrServerShuttingDown
}
}
// connectToPeer establishes a connection to a remote peer. errChan is used to
// notify the caller if the connection attempt has failed. Otherwise, it will be
// closed.
func (s *server) connectToPeer(addr *lnwire.NetAddress, errChan chan<- error) {
conn, err := brontide.Dial(s.identityPriv, addr, cfg.net.Dial)
if err != nil {
srvrLog.Errorf("Unable to connect to %v: %v", addr, err)
select {
case errChan <- err:
case <-s.quit:
}
return
}
close(errChan)
s.OutboundPeerConnected(nil, conn)
}
// DisconnectPeer sends the request to server to close the connection with peer
// identified by public key.
//
// NOTE: This function is safe for concurrent access.
func (s *server) DisconnectPeer(pubKey *btcec.PublicKey) error {
pubBytes := pubKey.SerializeCompressed()
pubStr := string(pubBytes)
s.mu.Lock()
defer s.mu.Unlock()
// Check that were actually connected to this peer. If not, then we'll
// exit in an error as we can't disconnect from a peer that we're not
// currently connected to.
peer, err := s.findPeerByPubStr(pubStr)
if err == ErrPeerNotConnected {
return fmt.Errorf("peer %x is not connected", pubBytes)
}
srvrLog.Infof("Disconnecting from %v", peer)
s.cancelConnReqs(pubStr, nil)
// If this peer was formerly a persistent connection, then we'll remove
// them from this map so we don't attempt to re-connect after we
// disconnect.
delete(s.persistentPeers, pubStr)
delete(s.persistentPeersBackoff, pubStr)
// Remove the current peer from the server's internal state and signal
// that the peer termination watcher does not need to execute for this
// peer.
s.removePeer(peer)
s.ignorePeerTermination[peer] = struct{}{}
return nil
}
// OpenChannel sends a request to the server to open a channel to the specified
// peer identified by nodeKey with the passed channel funding parameters.
//
// NOTE: This function is safe for concurrent access.
func (s *server) OpenChannel(
req *openChanReq) (chan *lnrpc.OpenStatusUpdate, chan error) {
// The updateChan will have a buffer of 2, since we expect a ChanPending
// + a ChanOpen update, and we want to make sure the funding process is
// not blocked if the caller is not reading the updates.
req.updates = make(chan *lnrpc.OpenStatusUpdate, 2)
req.err = make(chan error, 1)
// First attempt to locate the target peer to open a channel with, if
// we're unable to locate the peer then this request will fail.
pubKeyBytes := req.targetPubkey.SerializeCompressed()
s.mu.RLock()
peer, ok := s.peersByPub[string(pubKeyBytes)]
if !ok {
s.mu.RUnlock()
req.err <- fmt.Errorf("peer %x is not online", pubKeyBytes)
return req.updates, req.err
}
s.mu.RUnlock()
// If the fee rate wasn't specified, then we'll use a default
// confirmation target.
if req.fundingFeePerKw == 0 {
estimator := s.cc.feeEstimator
feeRate, err := estimator.EstimateFeePerKW(6)
if err != nil {
req.err <- err
return req.updates, req.err
}
req.fundingFeePerKw = feeRate
}
// Spawn a goroutine to send the funding workflow request to the funding
// manager. This allows the server to continue handling queries instead
// of blocking on this request which is exported as a synchronous
// request to the outside world.
go s.fundingMgr.initFundingWorkflow(peer, req)
return req.updates, req.err
}
// Peers returns a slice of all active peers.
//
// NOTE: This function is safe for concurrent access.
func (s *server) Peers() []*peer {
s.mu.RLock()
defer s.mu.RUnlock()
2018-02-14 08:48:42 +03:00
peers := make([]*peer, 0, len(s.peersByPub))
for _, peer := range s.peersByPub {
peers = append(peers, peer)
}
return peers
}
// parseHexColor takes a hex string representation of a color in the
// form "#RRGGBB", parses the hex color values, and returns a color.RGBA
// struct of the same color.
func parseHexColor(colorStr string) (color.RGBA, error) {
// Check if the hex color string is a valid color representation.
if !validColorRegexp.MatchString(colorStr) {
return color.RGBA{}, errors.New("Color must be specified " +
"using a hexadecimal value in the form #RRGGBB")
}
// Decode the hex color string to bytes.
// The resulting byte array is in the form [R, G, B].
colorBytes, err := hex.DecodeString(colorStr[1:])
if err != nil {
return color.RGBA{}, err
}
return color.RGBA{R: colorBytes[0], G: colorBytes[1], B: colorBytes[2]}, nil
}
// computeNextBackoff uses a truncated exponential backoff to compute the next
// backoff using the value of the exiting backoff. The returned duration is
// randomized in either direction by 1/20 to prevent tight loops from
// stabilizing.
func computeNextBackoff(currBackoff time.Duration) time.Duration {
// Double the current backoff, truncating if it exceeds our maximum.
nextBackoff := 2 * currBackoff
if nextBackoff > cfg.MaxBackoff {
nextBackoff = cfg.MaxBackoff
}
// Using 1/10 of our duration as a margin, compute a random offset to
// avoid the nodes entering connection cycles.
margin := nextBackoff / 10
var wiggle big.Int
wiggle.SetUint64(uint64(margin))
if _, err := rand.Int(rand.Reader, &wiggle); err != nil {
// Randomizing is not mission critical, so we'll just return the
// current backoff.
return nextBackoff
}
// Otherwise add in our wiggle, but subtract out half of the margin so
// that the backoff can tweaked by 1/20 in either direction.
return nextBackoff + (time.Duration(wiggle.Uint64()) - margin/2)
}
// fetchNodeAdvertisedAddr attempts to fetch an advertised address of a node.
func (s *server) fetchNodeAdvertisedAddr(pub *btcec.PublicKey) (net.Addr, error) {
node, err := s.chanDB.ChannelGraph().FetchLightningNode(pub)
if err != nil {
return nil, err
}
if len(node.Addresses) == 0 {
return nil, errors.New("no advertised addresses found")
}
return node.Addresses[0], nil
}
// fetchLastChanUpdate returns a function which is able to retrieve our latest
// channel update for a target channel.
func (s *server) fetchLastChanUpdate() func(lnwire.ShortChannelID) (
*lnwire.ChannelUpdate, error) {
ourPubKey := s.identityPriv.PubKey().SerializeCompressed()
return func(cid lnwire.ShortChannelID) (*lnwire.ChannelUpdate, error) {
info, edge1, edge2, err := s.chanRouter.GetChannelByID(cid)
if err != nil {
return nil, err
}
return netann.ExtractChannelUpdate(
ourPubKey[:], info, edge1, edge2,
)
}
}
// applyChannelUpdate applies the channel update to the different sub-systems of
// the server.
func (s *server) applyChannelUpdate(update *lnwire.ChannelUpdate) error {
pubKey := s.identityPriv.PubKey()
errChan := s.authGossiper.ProcessLocalAnnouncement(update, pubKey)
select {
case err := <-errChan:
return err
case <-s.quit:
return ErrServerShuttingDown
}
}