lnd.xprv/lnwire/single_funding_response.go
Olaoluwa Osuntokun 6c7880ef76
lnwire: channels are now identified by outpoint
This commit modifies most of the wire messages to uniquely identify any
*active* channels by their funding output. This allows the wire
protocol to support funding transactions which open several channels in
parallel.

Any pending channels created by partial completion of the funding
workflow are to be identified by a uint64 initialized by both sides as
follows: the initiator of the connection starts from 0, while the
listening node starts from (1 << 63). These pending channel identifiers
are expected to be monotonically increasing with each new funding
workflow between two nodes. This identifier is volatile w.r.t to each
connection initiation.
2016-06-21 13:13:07 -07:00

181 lines
6.0 KiB
Go

package lnwire
import (
"bytes"
"fmt"
"io"
"github.com/roasbeef/btcd/btcec"
)
// SingleFundingResponse is the message Bob sends to Alice after she initiates
// the single funder channel workflow via a SingleFundingRequest message. Once
// Alice receives Bob's reponse, then she has all the items neccessary to
// construct the funding transaction, and both commitment transactions.
type SingleFundingResponse struct {
// ChannelID serves to uniquely identify the future channel created by
// the initiated single funder workflow.
ChannelID uint64
// RevocationHash is the initial revocation hash to be used for the
// responders's commitment transaction to derive their revocation public
// key as: P + G*revocationHash, where P is the initiator's channel
// public key.
RevocationHash [20]byte
// CommitmentKey is key the responder to the funding workflow wishes to
// use within their versino of the commitment transaction for any
// delayed (CSV) or immediate outputs to them.
CommitmentKey *btcec.PublicKey
// CsvDelay is the number of blocks to use for the relative time lock
// in the pay-to-self output of both commitment transactions.
CsvDelay uint32
// ChannelDerivationPoint is an secp256k1 point which will be used to
// derive the public key the responder will use for the half of the
// 2-of-2 multi-sig. Using the channel derivation point (CDP), and the
// initiators identity public key (A), the channel public key is
// computed as: C = A + CDP. In order to be valid all CDP's MUST have
// an odd y-coordinate.
ChannelDerivationPoint *btcec.PublicKey
// DeliveryPkScript defines the public key script that the initiator
// would like to use to receive their balance in the case of a
// cooperative close. Only the following script templates are
// supported: P2PKH, P2WKH, P2SH, and P2WSH.
DeliveryPkScript PkScript
}
// NewSingleFundingResponse creates, and returns a new empty
// SingleFundingResponse.
func NewSingleFundingResponse(chanID uint64, revocation [20]byte,
ck, cdp *btcec.PublicKey, delay uint32,
deliveryScript PkScript) *SingleFundingResponse {
return &SingleFundingResponse{
ChannelID: chanID,
RevocationHash: revocation,
CommitmentKey: ck,
CsvDelay: delay,
ChannelDerivationPoint: cdp,
DeliveryPkScript: deliveryScript,
}
}
// Decode deserializes the serialized SingleFundingResponse stored in the passed
// io.Reader into the target SingleFundingResponse using the deserialization
// rules defined by the passed protocol version.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingResponse) Decode(r io.Reader, pver uint32) error {
// ChannelID (8)
// Revocation Hash (20)
// Pubkey (32)
// DeliveryPkScript (final delivery)
err := readElements(r,
&c.ChannelID,
&c.RevocationHash,
&c.CommitmentKey,
&c.ChannelDerivationPoint,
&c.CsvDelay,
&c.DeliveryPkScript)
if err != nil {
return err
}
return nil
}
// Encode serializes the target SingleFundingResponse into the passed io.Writer
// implementation. Serialization will observe the rules defined by the passed
// protocol version.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingResponse) Encode(w io.Writer, pver uint32) error {
// ChannelID (8)
// Revocation Hash (20)
// Channel Derivation Point (32)
// DeliveryPkScript (final delivery)
err := writeElements(w,
c.ChannelID,
c.RevocationHash,
c.CommitmentKey,
c.ChannelDerivationPoint,
c.CsvDelay,
c.DeliveryPkScript)
if err != nil {
return err
}
return nil
}
// Command returns the uint32 code which uniquely identifies this message as a
// SingleFundingRequest on the wire.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingResponse) Command() uint32 {
return CmdSingleFundingResponse
}
// MaxPayloadLength returns the maximum allowed payload length for a
// SingleFundingResponse. This is calculated by summing the max length of all
// the fields within a SingleFundingResponse. To enforce a maximum
// DeliveryPkScript size, the size of a P2PKH public key script is used.
// Therefore, the final breakdown is: 8 + 20 + 33 + 33 + 4 + 25 = 123
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingResponse) MaxPayloadLength(uint32) uint32 {
return 123
}
// Validate examines each populated field within the SingleFundingResponse for
// field sanity. For example, all fields MUST NOT be negative, and all pkScripts
// must belong to the allowed set of public key scripts.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingResponse) Validate() error {
var zeroHash [20]byte
if bytes.Equal(zeroHash[:], c.RevocationHash[:]) {
return fmt.Errorf("revocation has must be non-zero")
}
// The channel derivation point must be non-nil, and have an odd
// y-coordinate.
if c.ChannelDerivationPoint == nil {
return fmt.Errorf("The channel derivation point must be non-nil")
}
//if c.ChannelDerivationPoint.Y.Bit(0) != 1 {
// return fmt.Errorf("The channel derivation point must have an odd " +
// "y-coordinate")
//}
// The delivery pkScript must be amongst the supported script
// templates.
if !isValidPkScript(c.DeliveryPkScript) {
return fmt.Errorf("Valid delivery public key scripts MUST be: " +
"P2PKH, P2WKH, P2SH, or P2WSH.")
}
// We're good!
return nil
}
// String returns the string representation of the SingleFundingResponse.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingResponse) String() string {
var serializedPubkey []byte
if &c.ChannelDerivationPoint != nil && c.ChannelDerivationPoint.X != nil {
serializedPubkey = c.ChannelDerivationPoint.SerializeCompressed()
}
return fmt.Sprintf("\n--- Begin SingleFundingResponse ---\n") +
fmt.Sprintf("ChannelID:\t\t\t%d\n", c.ChannelID) +
fmt.Sprintf("RevocationHash\t\t\t%x\n", c.RevocationHash) +
fmt.Sprintf("ChannelDerivationPoint\t\t\t\t%x\n", serializedPubkey) +
fmt.Sprintf("DeliveryPkScript\t\t%x\n", c.DeliveryPkScript) +
fmt.Sprintf("--- End SingleFundingResponse ---\n")
}