lnd.xprv/htlcswitch/switch.go
Olaoluwa Osuntokun db3819fcef
Merge pull request #5236 from offerm/preimage-to-settleevent
feature: expose preimage in forward+settle event
2021-07-09 14:35:11 -07:00

2256 lines
71 KiB
Go

package htlcswitch
import (
"bytes"
"errors"
"fmt"
"math/rand"
"sync"
"sync/atomic"
"time"
"github.com/btcsuite/btcd/wire"
"github.com/btcsuite/btcutil"
"github.com/davecgh/go-spew/spew"
"github.com/lightningnetwork/lnd/chainntnfs"
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/clock"
"github.com/lightningnetwork/lnd/contractcourt"
"github.com/lightningnetwork/lnd/htlcswitch/hop"
"github.com/lightningnetwork/lnd/kvdb"
"github.com/lightningnetwork/lnd/lntypes"
"github.com/lightningnetwork/lnd/lnwallet"
"github.com/lightningnetwork/lnd/lnwallet/chainfee"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/lightningnetwork/lnd/ticker"
)
const (
// DefaultFwdEventInterval is the duration between attempts to flush
// pending forwarding events to disk.
DefaultFwdEventInterval = 15 * time.Second
// DefaultLogInterval is the duration between attempts to log statistics
// about forwarding events.
DefaultLogInterval = 10 * time.Second
// DefaultAckInterval is the duration between attempts to ack any settle
// fails in a forwarding package.
DefaultAckInterval = 15 * time.Second
// DefaultHTLCExpiry is the duration after which Adds will be cancelled
// if they could not get added to an outgoing commitment.
DefaultHTLCExpiry = time.Minute
)
var (
// ErrChannelLinkNotFound is used when channel link hasn't been found.
ErrChannelLinkNotFound = errors.New("channel link not found")
// ErrDuplicateAdd signals that the ADD htlc was already forwarded
// through the switch and is locked into another commitment txn.
ErrDuplicateAdd = errors.New("duplicate add HTLC detected")
// ErrUnknownErrorDecryptor signals that we were unable to locate the
// error decryptor for this payment. This is likely due to restarting
// the daemon.
ErrUnknownErrorDecryptor = errors.New("unknown error decryptor")
// ErrSwitchExiting signaled when the switch has received a shutdown
// request.
ErrSwitchExiting = errors.New("htlcswitch shutting down")
// ErrNoLinksFound is an error returned when we attempt to retrieve the
// active links in the switch for a specific destination.
ErrNoLinksFound = errors.New("no channel links found")
// ErrUnreadableFailureMessage is returned when the failure message
// cannot be decrypted.
ErrUnreadableFailureMessage = errors.New("unreadable failure message")
// ErrLocalAddFailed signals that the ADD htlc for a local payment
// failed to be processed.
ErrLocalAddFailed = errors.New("local add HTLC failed")
)
// plexPacket encapsulates switch packet and adds error channel to receive
// error from request handler.
type plexPacket struct {
pkt *htlcPacket
err chan error
}
// ChannelCloseType is an enum which signals the type of channel closure the
// peer should execute.
type ChannelCloseType uint8
const (
// CloseRegular indicates a regular cooperative channel closure
// should be attempted.
CloseRegular ChannelCloseType = iota
// CloseBreach indicates that a channel breach has been detected, and
// the link should immediately be marked as unavailable.
CloseBreach
)
// ChanClose represents a request which close a particular channel specified by
// its id.
type ChanClose struct {
// CloseType is a variable which signals the type of channel closure the
// peer should execute.
CloseType ChannelCloseType
// ChanPoint represent the id of the channel which should be closed.
ChanPoint *wire.OutPoint
// TargetFeePerKw is the ideal fee that was specified by the caller.
// This value is only utilized if the closure type is CloseRegular.
// This will be the starting offered fee when the fee negotiation
// process for the cooperative closure transaction kicks off.
TargetFeePerKw chainfee.SatPerKWeight
// DeliveryScript is an optional delivery script to pay funds out to.
DeliveryScript lnwire.DeliveryAddress
// Updates is used by request creator to receive the notifications about
// execution of the close channel request.
Updates chan interface{}
// Err is used by request creator to receive request execution error.
Err chan error
}
// Config defines the configuration for the service. ALL elements within the
// configuration MUST be non-nil for the service to carry out its duties.
type Config struct {
// FwdingLog is an interface that will be used by the switch to log
// forwarding events. A forwarding event happens each time a payment
// circuit is successfully completed. So when we forward an HTLC, and a
// settle is eventually received.
FwdingLog ForwardingLog
// LocalChannelClose kicks-off the workflow to execute a cooperative or
// forced unilateral closure of the channel initiated by a local
// subsystem.
LocalChannelClose func(pubKey []byte, request *ChanClose)
// DB is the channeldb instance that will be used to back the switch's
// persistent circuit map.
DB *channeldb.DB
// SwitchPackager provides access to the forwarding packages of all
// active channels. This gives the switch the ability to read arbitrary
// forwarding packages, and ack settles and fails contained within them.
SwitchPackager channeldb.FwdOperator
// ExtractErrorEncrypter is an interface allowing switch to reextract
// error encrypters stored in the circuit map on restarts, since they
// are not stored directly within the database.
ExtractErrorEncrypter hop.ErrorEncrypterExtracter
// FetchLastChannelUpdate retrieves the latest routing policy for a
// target channel. This channel will typically be the outgoing channel
// specified when we receive an incoming HTLC. This will be used to
// provide payment senders our latest policy when sending encrypted
// error messages.
FetchLastChannelUpdate func(lnwire.ShortChannelID) (*lnwire.ChannelUpdate, error)
// Notifier is an instance of a chain notifier that we'll use to signal
// the switch when a new block has arrived.
Notifier chainntnfs.ChainNotifier
// HtlcNotifier is an instance of a htlcNotifier which we will pipe htlc
// events through.
HtlcNotifier htlcNotifier
// FwdEventTicker is a signal that instructs the htlcswitch to flush any
// pending forwarding events.
FwdEventTicker ticker.Ticker
// LogEventTicker is a signal instructing the htlcswitch to log
// aggregate stats about it's forwarding during the last interval.
LogEventTicker ticker.Ticker
// AckEventTicker is a signal instructing the htlcswitch to ack any settle
// fails in forwarding packages.
AckEventTicker ticker.Ticker
// AllowCircularRoute is true if the user has configured their node to
// allow forwards that arrive and depart our node over the same channel.
AllowCircularRoute bool
// RejectHTLC is a flag that instructs the htlcswitch to reject any
// HTLCs that are not from the source hop.
RejectHTLC bool
// Clock is a time source for the switch.
Clock clock.Clock
// HTLCExpiry is the interval after which Adds will be cancelled if they
// have not been yet been delivered to a link. The computed deadline
// will expiry this long after the Adds are added to a mailbox via
// AddPacket.
HTLCExpiry time.Duration
}
// Switch is the central messaging bus for all incoming/outgoing HTLCs.
// Connected peers with active channels are treated as named interfaces which
// refer to active channels as links. A link is the switch's message
// communication point with the goroutine that manages an active channel. New
// links are registered each time a channel is created, and unregistered once
// the channel is closed. The switch manages the hand-off process for multi-hop
// HTLCs, forwarding HTLCs initiated from within the daemon, and finally
// notifies users local-systems concerning their outstanding payment requests.
type Switch struct {
started int32 // To be used atomically.
shutdown int32 // To be used atomically.
// bestHeight is the best known height of the main chain. The links will
// be used this information to govern decisions based on HTLC timeouts.
// This will be retrieved by the registered links atomically.
bestHeight uint32
wg sync.WaitGroup
quit chan struct{}
// cfg is a copy of the configuration struct that the htlc switch
// service was initialized with.
cfg *Config
// networkResults stores the results of payments initiated by the user.
// results. The store is used to later look up the payments and notify
// the user of the result when they are complete. Each payment attempt
// should be given a unique integer ID when it is created, otherwise
// results might be overwritten.
networkResults *networkResultStore
// circuits is storage for payment circuits which are used to
// forward the settle/fail htlc updates back to the add htlc initiator.
circuits CircuitMap
// mailOrchestrator manages the lifecycle of mailboxes used throughout
// the switch, and facilitates delayed delivery of packets to links that
// later come online.
mailOrchestrator *mailOrchestrator
// indexMtx is a read/write mutex that protects the set of indexes
// below.
indexMtx sync.RWMutex
// pendingLinkIndex holds links that have not had their final, live
// short_chan_id assigned. These links can be transitioned into the
// primary linkIndex by using UpdateShortChanID to load their live id.
pendingLinkIndex map[lnwire.ChannelID]ChannelLink
// links is a map of channel id and channel link which manages
// this channel.
linkIndex map[lnwire.ChannelID]ChannelLink
// forwardingIndex is an index which is consulted by the switch when it
// needs to locate the next hop to forward an incoming/outgoing HTLC
// update to/from.
//
// TODO(roasbeef): eventually add a NetworkHop mapping before the
// ChannelLink
forwardingIndex map[lnwire.ShortChannelID]ChannelLink
// interfaceIndex maps the compressed public key of a peer to all the
// channels that the switch maintains with that peer.
interfaceIndex map[[33]byte]map[lnwire.ChannelID]ChannelLink
// htlcPlex is the channel which all connected links use to coordinate
// the setup/teardown of Sphinx (onion routing) payment circuits.
// Active links forward any add/settle messages over this channel each
// state transition, sending new adds/settles which are fully locked
// in.
htlcPlex chan *plexPacket
// chanCloseRequests is used to transfer the channel close request to
// the channel close handler.
chanCloseRequests chan *ChanClose
// resolutionMsgs is the channel that all external contract resolution
// messages will be sent over.
resolutionMsgs chan *resolutionMsg
// pendingFwdingEvents is the set of forwarding events which have been
// collected during the current interval, but hasn't yet been written
// to the forwarding log.
fwdEventMtx sync.Mutex
pendingFwdingEvents []channeldb.ForwardingEvent
// blockEpochStream is an active block epoch event stream backed by an
// active ChainNotifier instance. This will be used to retrieve the
// lastest height of the chain.
blockEpochStream *chainntnfs.BlockEpochEvent
// pendingSettleFails is the set of settle/fail entries that we need to
// ack in the forwarding package of the outgoing link. This was added to
// make pipelining settles more efficient.
pendingSettleFails []channeldb.SettleFailRef
}
// New creates the new instance of htlc switch.
func New(cfg Config, currentHeight uint32) (*Switch, error) {
circuitMap, err := NewCircuitMap(&CircuitMapConfig{
DB: cfg.DB,
ExtractErrorEncrypter: cfg.ExtractErrorEncrypter,
})
if err != nil {
return nil, err
}
s := &Switch{
bestHeight: currentHeight,
cfg: &cfg,
circuits: circuitMap,
linkIndex: make(map[lnwire.ChannelID]ChannelLink),
forwardingIndex: make(map[lnwire.ShortChannelID]ChannelLink),
interfaceIndex: make(map[[33]byte]map[lnwire.ChannelID]ChannelLink),
pendingLinkIndex: make(map[lnwire.ChannelID]ChannelLink),
networkResults: newNetworkResultStore(cfg.DB),
htlcPlex: make(chan *plexPacket),
chanCloseRequests: make(chan *ChanClose),
resolutionMsgs: make(chan *resolutionMsg),
quit: make(chan struct{}),
}
s.mailOrchestrator = newMailOrchestrator(&mailOrchConfig{
fetchUpdate: s.cfg.FetchLastChannelUpdate,
forwardPackets: s.ForwardPackets,
clock: s.cfg.Clock,
expiry: s.cfg.HTLCExpiry,
})
return s, nil
}
// resolutionMsg is a struct that wraps an existing ResolutionMsg with a done
// channel. We'll use this channel to synchronize delivery of the message with
// the caller.
type resolutionMsg struct {
contractcourt.ResolutionMsg
doneChan chan struct{}
}
// ProcessContractResolution is called by active contract resolvers once a
// contract they are watching over has been fully resolved. The message carries
// an external signal that *would* have been sent if the outgoing channel
// didn't need to go to the chain in order to fulfill a contract. We'll process
// this message just as if it came from an active outgoing channel.
func (s *Switch) ProcessContractResolution(msg contractcourt.ResolutionMsg) error {
done := make(chan struct{})
select {
case s.resolutionMsgs <- &resolutionMsg{
ResolutionMsg: msg,
doneChan: done,
}:
case <-s.quit:
return ErrSwitchExiting
}
select {
case <-done:
case <-s.quit:
return ErrSwitchExiting
}
return nil
}
// GetPaymentResult returns the the result of the payment attempt with the
// given attemptID. The paymentHash should be set to the payment's overall
// hash, or in case of AMP payments the payment's unique identifier.
//
// The method returns a channel where the payment result will be sent when
// available, or an error is encountered during forwarding. When a result is
// received on the channel, the HTLC is guaranteed to no longer be in flight.
// The switch shutting down is signaled by closing the channel. If the
// attemptID is unknown, ErrPaymentIDNotFound will be returned.
func (s *Switch) GetPaymentResult(attemptID uint64, paymentHash lntypes.Hash,
deobfuscator ErrorDecrypter) (<-chan *PaymentResult, error) {
var (
nChan <-chan *networkResult
err error
outKey = CircuitKey{
ChanID: hop.Source,
HtlcID: attemptID,
}
)
// If the payment is not found in the circuit map, check whether a
// result is already available.
// Assumption: no one will add this payment ID other than the caller.
if s.circuits.LookupCircuit(outKey) == nil {
res, err := s.networkResults.getResult(attemptID)
if err != nil {
return nil, err
}
c := make(chan *networkResult, 1)
c <- res
nChan = c
} else {
// The payment was committed to the circuits, subscribe for a
// result.
nChan, err = s.networkResults.subscribeResult(attemptID)
if err != nil {
return nil, err
}
}
resultChan := make(chan *PaymentResult, 1)
// Since the payment was known, we can start a goroutine that can
// extract the result when it is available, and pass it on to the
// caller.
s.wg.Add(1)
go func() {
defer s.wg.Done()
var n *networkResult
select {
case n = <-nChan:
case <-s.quit:
// We close the result channel to signal a shutdown. We
// don't send any result in this case since the HTLC is
// still in flight.
close(resultChan)
return
}
log.Debugf("Received network result %T for attemptID=%v", n.msg,
attemptID)
// Extract the result and pass it to the result channel.
result, err := s.extractResult(
deobfuscator, n, attemptID, paymentHash,
)
if err != nil {
e := fmt.Errorf("unable to extract result: %v", err)
log.Error(e)
resultChan <- &PaymentResult{
Error: e,
}
return
}
resultChan <- result
}()
return resultChan, nil
}
// CleanStore calls the underlying result store, telling it is safe to delete
// all entries except the ones in the keepPids map. This should be called
// preiodically to let the switch clean up payment results that we have
// handled.
func (s *Switch) CleanStore(keepPids map[uint64]struct{}) error {
return s.networkResults.cleanStore(keepPids)
}
// SendHTLC is used by other subsystems which aren't belong to htlc switch
// package in order to send the htlc update. The attemptID used MUST be unique
// for this HTLC, and MUST be used only once, otherwise the switch might reject
// it.
func (s *Switch) SendHTLC(firstHop lnwire.ShortChannelID, attemptID uint64,
htlc *lnwire.UpdateAddHTLC) error {
// Generate and send new update packet, if error will be received on
// this stage it means that packet haven't left boundaries of our
// system and something wrong happened.
packet := &htlcPacket{
incomingChanID: hop.Source,
incomingHTLCID: attemptID,
outgoingChanID: firstHop,
htlc: htlc,
}
circuit := newPaymentCircuit(&htlc.PaymentHash, packet)
actions, err := s.circuits.CommitCircuits(circuit)
if err != nil {
log.Errorf("unable to commit circuit in switch: %v", err)
return err
}
// Drop duplicate packet if it has already been seen.
switch {
case len(actions.Drops) == 1:
return ErrDuplicateAdd
case len(actions.Fails) == 1:
return ErrLocalAddFailed
}
// Send packet to link.
packet.circuit = circuit
// User has created the htlc update therefore we should find the
// appropriate channel link and send the payment over this link.
link, linkErr := s.getLocalLink(packet, htlc)
if linkErr != nil {
// Notify the htlc notifier of a link failure on our
// outgoing link. Incoming timelock/amount values are
// not set because they are not present for local sends.
s.cfg.HtlcNotifier.NotifyLinkFailEvent(
newHtlcKey(packet),
HtlcInfo{
OutgoingTimeLock: htlc.Expiry,
OutgoingAmt: htlc.Amount,
},
HtlcEventTypeSend,
linkErr,
false,
)
return linkErr
}
return link.HandleLocalAddPacket(packet)
}
// UpdateForwardingPolicies sends a message to the switch to update the
// forwarding policies for the set of target channels, keyed in chanPolicies.
//
// NOTE: This function is synchronous and will block until either the
// forwarding policies for all links have been updated, or the switch shuts
// down.
func (s *Switch) UpdateForwardingPolicies(
chanPolicies map[wire.OutPoint]ForwardingPolicy) {
log.Tracef("Updating link policies: %v", newLogClosure(func() string {
return spew.Sdump(chanPolicies)
}))
s.indexMtx.RLock()
// Update each link in chanPolicies.
for targetLink, policy := range chanPolicies {
cid := lnwire.NewChanIDFromOutPoint(&targetLink)
link, ok := s.linkIndex[cid]
if !ok {
log.Debugf("Unable to find ChannelPoint(%v) to update "+
"link policy", targetLink)
continue
}
link.UpdateForwardingPolicy(policy)
}
s.indexMtx.RUnlock()
}
// IsForwardedHTLC checks for a given channel and htlc index if it is related
// to an opened circuit that represents a forwarded payment.
func (s *Switch) IsForwardedHTLC(chanID lnwire.ShortChannelID,
htlcIndex uint64) bool {
circuit := s.circuits.LookupOpenCircuit(channeldb.CircuitKey{
ChanID: chanID,
HtlcID: htlcIndex,
})
return circuit != nil && circuit.Incoming.ChanID != hop.Source
}
// ForwardPackets adds a list of packets to the switch for processing. Fails
// and settles are added on a first past, simultaneously constructing circuits
// for any adds. After persisting the circuits, another pass of the adds is
// given to forward them through the router. The sending link's quit channel is
// used to prevent deadlocks when the switch stops a link in the midst of
// forwarding.
func (s *Switch) ForwardPackets(linkQuit chan struct{},
packets ...*htlcPacket) error {
var (
// fwdChan is a buffered channel used to receive err msgs from
// the htlcPlex when forwarding this batch.
fwdChan = make(chan error, len(packets))
// numSent keeps a running count of how many packets are
// forwarded to the switch, which determines how many responses
// we will wait for on the fwdChan..
numSent int
)
// No packets, nothing to do.
if len(packets) == 0 {
return nil
}
// Setup a barrier to prevent the background tasks from processing
// responses until this function returns to the user.
var wg sync.WaitGroup
wg.Add(1)
defer wg.Done()
// Before spawning the following goroutine to proxy our error responses,
// check to see if we have already been issued a shutdown request. If
// so, we exit early to avoid incrementing the switch's waitgroup while
// it is already in the process of shutting down.
select {
case <-linkQuit:
return nil
case <-s.quit:
return nil
default:
// Spawn a goroutine to log the errors returned from failed packets.
s.wg.Add(1)
go s.logFwdErrs(&numSent, &wg, fwdChan)
}
// Make a first pass over the packets, forwarding any settles or fails.
// As adds are found, we create a circuit and append it to our set of
// circuits to be written to disk.
var circuits []*PaymentCircuit
var addBatch []*htlcPacket
for _, packet := range packets {
switch htlc := packet.htlc.(type) {
case *lnwire.UpdateAddHTLC:
circuit := newPaymentCircuit(&htlc.PaymentHash, packet)
packet.circuit = circuit
circuits = append(circuits, circuit)
addBatch = append(addBatch, packet)
default:
err := s.routeAsync(packet, fwdChan, linkQuit)
if err != nil {
return fmt.Errorf("failed to forward packet %v", err)
}
numSent++
}
}
// If this batch did not contain any circuits to commit, we can return
// early.
if len(circuits) == 0 {
return nil
}
// Write any circuits that we found to disk.
actions, err := s.circuits.CommitCircuits(circuits...)
if err != nil {
log.Errorf("unable to commit circuits in switch: %v", err)
}
// Split the htlc packets by comparing an in-order seek to the head of
// the added, dropped, or failed circuits.
//
// NOTE: This assumes each list is guaranteed to be a subsequence of the
// circuits, and that the union of the sets results in the original set
// of circuits.
var addedPackets, failedPackets []*htlcPacket
for _, packet := range addBatch {
switch {
case len(actions.Adds) > 0 && packet.circuit == actions.Adds[0]:
addedPackets = append(addedPackets, packet)
actions.Adds = actions.Adds[1:]
case len(actions.Drops) > 0 && packet.circuit == actions.Drops[0]:
actions.Drops = actions.Drops[1:]
case len(actions.Fails) > 0 && packet.circuit == actions.Fails[0]:
failedPackets = append(failedPackets, packet)
actions.Fails = actions.Fails[1:]
}
}
// Now, forward any packets for circuits that were successfully added to
// the switch's circuit map.
for _, packet := range addedPackets {
err := s.routeAsync(packet, fwdChan, linkQuit)
if err != nil {
return fmt.Errorf("failed to forward packet %v", err)
}
numSent++
}
// Lastly, for any packets that failed, this implies that they were
// left in a half added state, which can happen when recovering from
// failures.
if len(failedPackets) > 0 {
var failure lnwire.FailureMessage
update, err := s.cfg.FetchLastChannelUpdate(
failedPackets[0].incomingChanID,
)
if err != nil {
failure = &lnwire.FailTemporaryNodeFailure{}
} else {
failure = lnwire.NewTemporaryChannelFailure(update)
}
linkError := NewDetailedLinkError(
failure, OutgoingFailureIncompleteForward,
)
for _, packet := range failedPackets {
// We don't handle the error here since this method
// always returns an error.
_ = s.failAddPacket(packet, linkError)
}
}
return nil
}
// logFwdErrs logs any errors received on `fwdChan`
func (s *Switch) logFwdErrs(num *int, wg *sync.WaitGroup, fwdChan chan error) {
defer s.wg.Done()
// Wait here until the outer function has finished persisting
// and routing the packets. This guarantees we don't read from num until
// the value is accurate.
wg.Wait()
numSent := *num
for i := 0; i < numSent; i++ {
select {
case err := <-fwdChan:
if err != nil {
log.Errorf("Unhandled error while reforwarding htlc "+
"settle/fail over htlcswitch: %v", err)
}
case <-s.quit:
log.Errorf("unable to forward htlc packet " +
"htlc switch was stopped")
return
}
}
}
// routeAsync sends a packet through the htlc switch, using the provided err
// chan to propagate errors back to the caller. The link's quit channel is
// provided so that the send can be canceled if either the link or the switch
// receive a shutdown requuest. This method does not wait for a response from
// the htlcForwarder before returning.
func (s *Switch) routeAsync(packet *htlcPacket, errChan chan error,
linkQuit chan struct{}) error {
command := &plexPacket{
pkt: packet,
err: errChan,
}
select {
case s.htlcPlex <- command:
return nil
case <-linkQuit:
return ErrLinkShuttingDown
case <-s.quit:
return errors.New("htlc switch was stopped")
}
}
// getLocalLink handles the addition of a htlc for a send that originates from
// our node. It returns the link that the htlc should be forwarded outwards on,
// and a link error if the htlc cannot be forwarded.
func (s *Switch) getLocalLink(pkt *htlcPacket, htlc *lnwire.UpdateAddHTLC) (
ChannelLink, *LinkError) {
// Try to find links by node destination.
s.indexMtx.RLock()
link, err := s.getLinkByShortID(pkt.outgoingChanID)
s.indexMtx.RUnlock()
if err != nil {
log.Errorf("Link %v not found", pkt.outgoingChanID)
return nil, NewLinkError(&lnwire.FailUnknownNextPeer{})
}
if !link.EligibleToForward() {
log.Errorf("Link %v is not available to forward",
pkt.outgoingChanID)
// The update does not need to be populated as the error
// will be returned back to the router.
return nil, NewDetailedLinkError(
lnwire.NewTemporaryChannelFailure(nil),
OutgoingFailureLinkNotEligible,
)
}
// Ensure that the htlc satisfies the outgoing channel policy.
currentHeight := atomic.LoadUint32(&s.bestHeight)
htlcErr := link.CheckHtlcTransit(
htlc.PaymentHash, htlc.Amount, htlc.Expiry, currentHeight,
)
if htlcErr != nil {
log.Errorf("Link %v policy for local forward not "+
"satisfied", pkt.outgoingChanID)
return nil, htlcErr
}
return link, nil
}
// handleLocalResponse processes a Settle or Fail responding to a
// locally-initiated payment. This is handled asynchronously to avoid blocking
// the main event loop within the switch, as these operations can require
// multiple db transactions. The guarantees of the circuit map are stringent
// enough such that we are able to tolerate reordering of these operations
// without side effects. The primary operations handled are:
// 1. Save the payment result to the pending payment store.
// 2. Notify subscribers about the payment result.
// 3. Ack settle/fail references, to avoid resending this response internally
// 4. Teardown the closing circuit in the circuit map
//
// NOTE: This method MUST be spawned as a goroutine.
func (s *Switch) handleLocalResponse(pkt *htlcPacket) {
defer s.wg.Done()
attemptID := pkt.incomingHTLCID
// The error reason will be unencypted in case this a local
// failure or a converted error.
unencrypted := pkt.localFailure || pkt.convertedError
n := &networkResult{
msg: pkt.htlc,
unencrypted: unencrypted,
isResolution: pkt.isResolution,
}
// Store the result to the db. This will also notify subscribers about
// the result.
if err := s.networkResults.storeResult(attemptID, n); err != nil {
log.Errorf("Unable to complete payment for pid=%v: %v",
attemptID, err)
return
}
// First, we'll clean up any fwdpkg references, circuit entries, and
// mark in our db that the payment for this payment hash has either
// succeeded or failed.
//
// If this response is contained in a forwarding package, we'll start by
// acking the settle/fail so that we don't continue to retransmit the
// HTLC internally.
if pkt.destRef != nil {
if err := s.ackSettleFail(*pkt.destRef); err != nil {
log.Warnf("Unable to ack settle/fail reference: %s: %v",
*pkt.destRef, err)
return
}
}
// Next, we'll remove the circuit since we are about to complete an
// fulfill/fail of this HTLC. Since we've already removed the
// settle/fail fwdpkg reference, the response from the peer cannot be
// replayed internally if this step fails. If this happens, this logic
// will be executed when a provided resolution message comes through.
// This can only happen if the circuit is still open, which is why this
// ordering is chosen.
if err := s.teardownCircuit(pkt); err != nil {
log.Warnf("Unable to teardown circuit %s: %v",
pkt.inKey(), err)
return
}
// Finally, notify on the htlc failure or success that has been handled.
key := newHtlcKey(pkt)
eventType := getEventType(pkt)
switch htlc := pkt.htlc.(type) {
case *lnwire.UpdateFulfillHTLC:
s.cfg.HtlcNotifier.NotifySettleEvent(key, htlc.PaymentPreimage,
eventType)
case *lnwire.UpdateFailHTLC:
s.cfg.HtlcNotifier.NotifyForwardingFailEvent(key, eventType)
}
}
// extractResult uses the given deobfuscator to extract the payment result from
// the given network message.
func (s *Switch) extractResult(deobfuscator ErrorDecrypter, n *networkResult,
attemptID uint64, paymentHash lntypes.Hash) (*PaymentResult, error) {
switch htlc := n.msg.(type) {
// We've received a settle update which means we can finalize the user
// payment and return successful response.
case *lnwire.UpdateFulfillHTLC:
return &PaymentResult{
Preimage: htlc.PaymentPreimage,
}, nil
// We've received a fail update which means we can finalize the
// user payment and return fail response.
case *lnwire.UpdateFailHTLC:
paymentErr := s.parseFailedPayment(
deobfuscator, attemptID, paymentHash, n.unencrypted,
n.isResolution, htlc,
)
return &PaymentResult{
Error: paymentErr,
}, nil
default:
return nil, fmt.Errorf("received unknown response type: %T",
htlc)
}
}
// parseFailedPayment determines the appropriate failure message to return to
// a user initiated payment. The three cases handled are:
// 1) An unencrypted failure, which should already plaintext.
// 2) A resolution from the chain arbitrator, which possibly has no failure
// reason attached.
// 3) A failure from the remote party, which will need to be decrypted using
// the payment deobfuscator.
func (s *Switch) parseFailedPayment(deobfuscator ErrorDecrypter,
attemptID uint64, paymentHash lntypes.Hash, unencrypted,
isResolution bool, htlc *lnwire.UpdateFailHTLC) error {
switch {
// The payment never cleared the link, so we don't need to
// decrypt the error, simply decode it them report back to the
// user.
case unencrypted:
r := bytes.NewReader(htlc.Reason)
failureMsg, err := lnwire.DecodeFailure(r, 0)
if err != nil {
// If we could not decode the failure reason, return a link
// error indicating that we failed to decode the onion.
linkError := NewDetailedLinkError(
// As this didn't even clear the link, we don't
// need to apply an update here since it goes
// directly to the router.
lnwire.NewTemporaryChannelFailure(nil),
OutgoingFailureDecodeError,
)
log.Errorf("%v: (hash=%v, pid=%d): %v",
linkError.FailureDetail.FailureString(),
paymentHash, attemptID, err)
return linkError
}
// If we successfully decoded the failure reason, return it.
return NewLinkError(failureMsg)
// A payment had to be timed out on chain before it got past
// the first hop. In this case, we'll report a permanent
// channel failure as this means us, or the remote party had to
// go on chain.
case isResolution && htlc.Reason == nil:
linkError := NewDetailedLinkError(
&lnwire.FailPermanentChannelFailure{},
OutgoingFailureOnChainTimeout,
)
log.Infof("%v: hash=%v, pid=%d",
linkError.FailureDetail.FailureString(),
paymentHash, attemptID)
return linkError
// A regular multi-hop payment error that we'll need to
// decrypt.
default:
// We'll attempt to fully decrypt the onion encrypted
// error. If we're unable to then we'll bail early.
failure, err := deobfuscator.DecryptError(htlc.Reason)
if err != nil {
log.Errorf("unable to de-obfuscate onion failure "+
"(hash=%v, pid=%d): %v",
paymentHash, attemptID, err)
return ErrUnreadableFailureMessage
}
return failure
}
}
// handlePacketForward is used in cases when we need forward the htlc update
// from one channel link to another and be able to propagate the settle/fail
// updates back. This behaviour is achieved by creation of payment circuits.
func (s *Switch) handlePacketForward(packet *htlcPacket) error {
switch htlc := packet.htlc.(type) {
// Channel link forwarded us a new htlc, therefore we initiate the
// payment circuit within our internal state so we can properly forward
// the ultimate settle message back latter.
case *lnwire.UpdateAddHTLC:
// Check if the node is set to reject all onward HTLCs and also make
// sure that HTLC is not from the source node.
if s.cfg.RejectHTLC {
failure := NewDetailedLinkError(
&lnwire.FailChannelDisabled{},
OutgoingFailureForwardsDisabled,
)
return s.failAddPacket(packet, failure)
}
// Before we attempt to find a non-strict forwarding path for
// this htlc, check whether the htlc is being routed over the
// same incoming and outgoing channel. If our node does not
// allow forwards of this nature, we fail the htlc early. This
// check is in place to disallow inefficiently routed htlcs from
// locking up our balance.
linkErr := checkCircularForward(
packet.incomingChanID, packet.outgoingChanID,
s.cfg.AllowCircularRoute, htlc.PaymentHash,
)
if linkErr != nil {
return s.failAddPacket(packet, linkErr)
}
s.indexMtx.RLock()
targetLink, err := s.getLinkByShortID(packet.outgoingChanID)
if err != nil {
s.indexMtx.RUnlock()
log.Debugf("unable to find link with "+
"destination %v", packet.outgoingChanID)
// If packet was forwarded from another channel link
// than we should notify this link that some error
// occurred.
linkError := NewLinkError(
&lnwire.FailUnknownNextPeer{},
)
return s.failAddPacket(packet, linkError)
}
targetPeerKey := targetLink.Peer().PubKey()
interfaceLinks, _ := s.getLinks(targetPeerKey)
s.indexMtx.RUnlock()
// We'll keep track of any HTLC failures during the link
// selection process. This way we can return the error for
// precise link that the sender selected, while optimistically
// trying all links to utilize our available bandwidth.
linkErrs := make(map[lnwire.ShortChannelID]*LinkError)
// Find all destination channel links with appropriate
// bandwidth.
var destinations []ChannelLink
for _, link := range interfaceLinks {
var failure *LinkError
// We'll skip any links that aren't yet eligible for
// forwarding.
if !link.EligibleToForward() {
failure = NewDetailedLinkError(
&lnwire.FailUnknownNextPeer{},
OutgoingFailureLinkNotEligible,
)
} else {
// We'll ensure that the HTLC satisfies the
// current forwarding conditions of this target
// link.
currentHeight := atomic.LoadUint32(&s.bestHeight)
failure = link.CheckHtlcForward(
htlc.PaymentHash, packet.incomingAmount,
packet.amount, packet.incomingTimeout,
packet.outgoingTimeout, currentHeight,
)
}
// If this link can forward the htlc, add it to the set
// of destinations.
if failure == nil {
destinations = append(destinations, link)
continue
}
linkErrs[link.ShortChanID()] = failure
}
// If we had a forwarding failure due to the HTLC not
// satisfying the current policy, then we'll send back an
// error, but ensure we send back the error sourced at the
// *target* link.
if len(destinations) == 0 {
// At this point, some or all of the links rejected the
// HTLC so we couldn't forward it. So we'll try to look
// up the error that came from the source.
linkErr, ok := linkErrs[packet.outgoingChanID]
if !ok {
// If we can't find the error of the source,
// then we'll return an unknown next peer,
// though this should never happen.
linkErr = NewLinkError(
&lnwire.FailUnknownNextPeer{},
)
log.Warnf("unable to find err source for "+
"outgoing_link=%v, errors=%v",
packet.outgoingChanID, newLogClosure(func() string {
return spew.Sdump(linkErrs)
}))
}
log.Tracef("incoming HTLC(%x) violated "+
"target outgoing link (id=%v) policy: %v",
htlc.PaymentHash[:], packet.outgoingChanID,
linkErr)
return s.failAddPacket(packet, linkErr)
}
// Choose a random link out of the set of links that can forward
// this htlc. The reason for randomization is to evenly
// distribute the htlc load without making assumptions about
// what the best channel is.
destination := destinations[rand.Intn(len(destinations))]
// Send the packet to the destination channel link which
// manages the channel.
packet.outgoingChanID = destination.ShortChanID()
return destination.HandleSwitchPacket(packet)
case *lnwire.UpdateFailHTLC, *lnwire.UpdateFulfillHTLC:
// If the source of this packet has not been set, use the
// circuit map to lookup the origin.
circuit, err := s.closeCircuit(packet)
if err != nil {
return err
}
// closeCircuit returns a nil circuit when a settle packet returns an
// ErrUnknownCircuit error upon the inner call to CloseCircuit.
if circuit == nil {
return nil
}
fail, isFail := htlc.(*lnwire.UpdateFailHTLC)
if isFail && !packet.hasSource {
switch {
// No message to encrypt, locally sourced payment.
case circuit.ErrorEncrypter == nil:
// If this is a resolution message, then we'll need to
// encrypt it as it's actually internally sourced.
case packet.isResolution:
var err error
// TODO(roasbeef): don't need to pass actually?
failure := &lnwire.FailPermanentChannelFailure{}
fail.Reason, err = circuit.ErrorEncrypter.EncryptFirstHop(
failure,
)
if err != nil {
err = fmt.Errorf("unable to obfuscate "+
"error: %v", err)
log.Error(err)
}
// Alternatively, if the remote party send us an
// UpdateFailMalformedHTLC, then we'll need to convert
// this into a proper well formatted onion error as
// there's no HMAC currently.
case packet.convertedError:
log.Infof("Converting malformed HTLC error "+
"for circuit for Circuit(%x: "+
"(%s, %d) <-> (%s, %d))", packet.circuit.PaymentHash,
packet.incomingChanID, packet.incomingHTLCID,
packet.outgoingChanID, packet.outgoingHTLCID)
fail.Reason = circuit.ErrorEncrypter.EncryptMalformedError(
fail.Reason,
)
default:
// Otherwise, it's a forwarded error, so we'll perform a
// wrapper encryption as normal.
fail.Reason = circuit.ErrorEncrypter.IntermediateEncrypt(
fail.Reason,
)
}
} else if !isFail && circuit.Outgoing != nil {
// If this is an HTLC settle, and it wasn't from a
// locally initiated HTLC, then we'll log a forwarding
// event so we can flush it to disk later.
//
// TODO(roasbeef): only do this once link actually
// fully settles?
localHTLC := packet.incomingChanID == hop.Source
if !localHTLC {
log.Infof("Forwarded HTLC(%x) of %v (fee: %v) "+
"from IncomingChanID(%v) to OutgoingChanID(%v)",
circuit.PaymentHash[:], circuit.OutgoingAmount,
circuit.IncomingAmount-circuit.OutgoingAmount,
circuit.Incoming.ChanID, circuit.Outgoing.ChanID)
s.fwdEventMtx.Lock()
s.pendingFwdingEvents = append(
s.pendingFwdingEvents,
channeldb.ForwardingEvent{
Timestamp: time.Now(),
IncomingChanID: circuit.Incoming.ChanID,
OutgoingChanID: circuit.Outgoing.ChanID,
AmtIn: circuit.IncomingAmount,
AmtOut: circuit.OutgoingAmount,
},
)
s.fwdEventMtx.Unlock()
}
}
// A blank IncomingChanID in a circuit indicates that it is a pending
// user-initiated payment.
if packet.incomingChanID == hop.Source {
s.wg.Add(1)
go s.handleLocalResponse(packet)
return nil
}
// Check to see that the source link is online before removing
// the circuit.
return s.mailOrchestrator.Deliver(packet.incomingChanID, packet)
default:
return errors.New("wrong update type")
}
}
// checkCircularForward checks whether a forward is circular (arrives and
// departs on the same link) and returns a link error if the switch is
// configured to disallow this behaviour.
func checkCircularForward(incoming, outgoing lnwire.ShortChannelID,
allowCircular bool, paymentHash lntypes.Hash) *LinkError {
// If the route is not circular we do not need to perform any further
// checks.
if incoming != outgoing {
return nil
}
// If the incoming and outgoing link are equal, the htlc is part of a
// circular route which may be used to lock up our liquidity. If the
// switch is configured to allow circular routes, log that we are
// allowing the route then return nil.
if allowCircular {
log.Debugf("allowing circular route over link: %v "+
"(payment hash: %x)", incoming, paymentHash)
return nil
}
// If our node disallows circular routes, return a temporary channel
// failure. There is nothing wrong with the policy used by the remote
// node, so we do not include a channel update.
return NewDetailedLinkError(
lnwire.NewTemporaryChannelFailure(nil),
OutgoingFailureCircularRoute,
)
}
// failAddPacket encrypts a fail packet back to an add packet's source.
// The ciphertext will be derived from the failure message proivded by context.
// This method returns the failErr if all other steps complete successfully.
func (s *Switch) failAddPacket(packet *htlcPacket, failure *LinkError) error {
// Encrypt the failure so that the sender will be able to read the error
// message. Since we failed this packet, we use EncryptFirstHop to
// obfuscate the failure for their eyes only.
reason, err := packet.obfuscator.EncryptFirstHop(failure.WireMessage())
if err != nil {
err := fmt.Errorf("unable to obfuscate "+
"error: %v", err)
log.Error(err)
return err
}
log.Error(failure.Error())
// Create a failure packet for this htlc. The the full set of
// information about the htlc failure is included so that they can
// be included in link failure notifications.
failPkt := &htlcPacket{
sourceRef: packet.sourceRef,
incomingChanID: packet.incomingChanID,
incomingHTLCID: packet.incomingHTLCID,
outgoingChanID: packet.outgoingChanID,
outgoingHTLCID: packet.outgoingHTLCID,
incomingAmount: packet.incomingAmount,
amount: packet.amount,
incomingTimeout: packet.incomingTimeout,
outgoingTimeout: packet.outgoingTimeout,
circuit: packet.circuit,
linkFailure: failure,
htlc: &lnwire.UpdateFailHTLC{
Reason: reason,
},
}
// Route a fail packet back to the source link.
err = s.mailOrchestrator.Deliver(failPkt.incomingChanID, failPkt)
if err != nil {
err = fmt.Errorf("source chanid=%v unable to "+
"handle switch packet: %v",
packet.incomingChanID, err)
log.Error(err)
return err
}
return failure
}
// closeCircuit accepts a settle or fail htlc and the associated htlc packet and
// attempts to determine the source that forwarded this htlc. This method will
// set the incoming chan and htlc ID of the given packet if the source was
// found, and will properly [re]encrypt any failure messages.
func (s *Switch) closeCircuit(pkt *htlcPacket) (*PaymentCircuit, error) {
// If the packet has its source, that means it was failed locally by
// the outgoing link. We fail it here to make sure only one response
// makes it through the switch.
if pkt.hasSource {
circuit, err := s.circuits.FailCircuit(pkt.inKey())
switch err {
// Circuit successfully closed.
case nil:
return circuit, nil
// Circuit was previously closed, but has not been deleted.
// We'll just drop this response until the circuit has been
// fully removed.
case ErrCircuitClosing:
return nil, err
// Failed to close circuit because it does not exist. This is
// likely because the circuit was already successfully closed.
// Since this packet failed locally, there is no forwarding
// package entry to acknowledge.
case ErrUnknownCircuit:
return nil, err
// Unexpected error.
default:
return nil, err
}
}
// Otherwise, this is packet was received from the remote party. Use
// circuit map to find the incoming link to receive the settle/fail.
circuit, err := s.circuits.CloseCircuit(pkt.outKey())
switch err {
// Open circuit successfully closed.
case nil:
pkt.incomingChanID = circuit.Incoming.ChanID
pkt.incomingHTLCID = circuit.Incoming.HtlcID
pkt.circuit = circuit
pkt.sourceRef = &circuit.AddRef
pktType := "SETTLE"
if _, ok := pkt.htlc.(*lnwire.UpdateFailHTLC); ok {
pktType = "FAIL"
}
log.Debugf("Closed completed %s circuit for %x: "+
"(%s, %d) <-> (%s, %d)", pktType, pkt.circuit.PaymentHash,
pkt.incomingChanID, pkt.incomingHTLCID,
pkt.outgoingChanID, pkt.outgoingHTLCID)
return circuit, nil
// Circuit was previously closed, but has not been deleted. We'll just
// drop this response until the circuit has been removed.
case ErrCircuitClosing:
return nil, err
// Failed to close circuit because it does not exist. This is likely
// because the circuit was already successfully closed.
case ErrUnknownCircuit:
if pkt.destRef != nil {
// Add this SettleFailRef to the set of pending settle/fail entries
// awaiting acknowledgement.
s.pendingSettleFails = append(s.pendingSettleFails, *pkt.destRef)
}
// If this is a settle, we will not log an error message as settles
// are expected to hit the ErrUnknownCircuit case. The only way fails
// can hit this case if the link restarts after having just sent a fail
// to the switch.
_, isSettle := pkt.htlc.(*lnwire.UpdateFulfillHTLC)
if !isSettle {
err := fmt.Errorf("unable to find target channel "+
"for HTLC fail: channel ID = %s, "+
"HTLC ID = %d", pkt.outgoingChanID,
pkt.outgoingHTLCID)
log.Error(err)
return nil, err
}
return nil, nil
// Unexpected error.
default:
return nil, err
}
}
// ackSettleFail is used by the switch to ACK any settle/fail entries in the
// forwarding package of the outgoing link for a payment circuit. We do this if
// we're the originator of the payment, so the link stops attempting to
// re-broadcast.
func (s *Switch) ackSettleFail(settleFailRefs ...channeldb.SettleFailRef) error {
return kvdb.Batch(s.cfg.DB.Backend, func(tx kvdb.RwTx) error {
return s.cfg.SwitchPackager.AckSettleFails(tx, settleFailRefs...)
})
}
// teardownCircuit removes a pending or open circuit from the switch's circuit
// map and prints useful logging statements regarding the outcome.
func (s *Switch) teardownCircuit(pkt *htlcPacket) error {
var pktType string
switch htlc := pkt.htlc.(type) {
case *lnwire.UpdateFulfillHTLC:
pktType = "SETTLE"
case *lnwire.UpdateFailHTLC:
pktType = "FAIL"
default:
err := fmt.Errorf("cannot tear down packet of type: %T", htlc)
log.Errorf(err.Error())
return err
}
switch {
case pkt.circuit.HasKeystone():
log.Debugf("Tearing down open circuit with %s pkt, removing circuit=%v "+
"with keystone=%v", pktType, pkt.inKey(), pkt.outKey())
err := s.circuits.DeleteCircuits(pkt.inKey())
if err != nil {
log.Warnf("Failed to tear down open circuit (%s, %d) <-> (%s, %d) "+
"with payment_hash-%v using %s pkt",
pkt.incomingChanID, pkt.incomingHTLCID,
pkt.outgoingChanID, pkt.outgoingHTLCID,
pkt.circuit.PaymentHash, pktType)
return err
}
log.Debugf("Closed completed %s circuit for %x: "+
"(%s, %d) <-> (%s, %d)", pktType, pkt.circuit.PaymentHash,
pkt.incomingChanID, pkt.incomingHTLCID,
pkt.outgoingChanID, pkt.outgoingHTLCID)
default:
log.Debugf("Tearing down incomplete circuit with %s for inkey=%v",
pktType, pkt.inKey())
err := s.circuits.DeleteCircuits(pkt.inKey())
if err != nil {
log.Warnf("Failed to tear down pending %s circuit for %x: "+
"(%s, %d)", pktType, pkt.circuit.PaymentHash,
pkt.incomingChanID, pkt.incomingHTLCID)
return err
}
log.Debugf("Removed pending onion circuit for %x: "+
"(%s, %d)", pkt.circuit.PaymentHash,
pkt.incomingChanID, pkt.incomingHTLCID)
}
return nil
}
// CloseLink creates and sends the close channel command to the target link
// directing the specified closure type. If the closure type is CloseRegular,
// targetFeePerKw parameter should be the ideal fee-per-kw that will be used as
// a starting point for close negotiation. The deliveryScript parameter is an
// optional parameter which sets a user specified script to close out to.
func (s *Switch) CloseLink(chanPoint *wire.OutPoint,
closeType ChannelCloseType, targetFeePerKw chainfee.SatPerKWeight,
deliveryScript lnwire.DeliveryAddress) (chan interface{}, chan error) {
// TODO(roasbeef) abstract out the close updates.
updateChan := make(chan interface{}, 2)
errChan := make(chan error, 1)
command := &ChanClose{
CloseType: closeType,
ChanPoint: chanPoint,
Updates: updateChan,
TargetFeePerKw: targetFeePerKw,
DeliveryScript: deliveryScript,
Err: errChan,
}
select {
case s.chanCloseRequests <- command:
return updateChan, errChan
case <-s.quit:
errChan <- ErrSwitchExiting
close(updateChan)
return updateChan, errChan
}
}
// htlcForwarder is responsible for optimally forwarding (and possibly
// fragmenting) incoming/outgoing HTLCs amongst all active interfaces and their
// links. The duties of the forwarder are similar to that of a network switch,
// in that it facilitates multi-hop payments by acting as a central messaging
// bus. The switch communicates will active links to create, manage, and tear
// down active onion routed payments. Each active channel is modeled as
// networked device with metadata such as the available payment bandwidth, and
// total link capacity.
//
// NOTE: This MUST be run as a goroutine.
func (s *Switch) htlcForwarder() {
defer s.wg.Done()
defer func() {
s.blockEpochStream.Cancel()
// Remove all links once we've been signalled for shutdown.
var linksToStop []ChannelLink
s.indexMtx.Lock()
for _, link := range s.linkIndex {
activeLink := s.removeLink(link.ChanID())
if activeLink == nil {
log.Errorf("unable to remove ChannelLink(%v) "+
"on stop", link.ChanID())
continue
}
linksToStop = append(linksToStop, activeLink)
}
for _, link := range s.pendingLinkIndex {
pendingLink := s.removeLink(link.ChanID())
if pendingLink == nil {
log.Errorf("unable to remove ChannelLink(%v) "+
"on stop", link.ChanID())
continue
}
linksToStop = append(linksToStop, pendingLink)
}
s.indexMtx.Unlock()
// Now that all pending and live links have been removed from
// the forwarding indexes, stop each one before shutting down.
// We'll shut them down in parallel to make exiting as fast as
// possible.
var wg sync.WaitGroup
for _, link := range linksToStop {
wg.Add(1)
go func(l ChannelLink) {
defer wg.Done()
l.Stop()
}(link)
}
wg.Wait()
// Before we exit fully, we'll attempt to flush out any
// forwarding events that may still be lingering since the last
// batch flush.
if err := s.FlushForwardingEvents(); err != nil {
log.Errorf("unable to flush forwarding events: %v", err)
}
}()
// TODO(roasbeef): cleared vs settled distinction
var (
totalNumUpdates uint64
totalSatSent btcutil.Amount
totalSatRecv btcutil.Amount
)
s.cfg.LogEventTicker.Resume()
defer s.cfg.LogEventTicker.Stop()
// Every 15 seconds, we'll flush out the forwarding events that
// occurred during that period.
s.cfg.FwdEventTicker.Resume()
defer s.cfg.FwdEventTicker.Stop()
defer s.cfg.AckEventTicker.Stop()
out:
for {
// If the set of pending settle/fail entries is non-zero,
// reinstate the ack ticker so we can batch ack them.
if len(s.pendingSettleFails) > 0 {
s.cfg.AckEventTicker.Resume()
}
select {
case blockEpoch, ok := <-s.blockEpochStream.Epochs:
if !ok {
break out
}
atomic.StoreUint32(&s.bestHeight, uint32(blockEpoch.Height))
// A local close request has arrived, we'll forward this to the
// relevant link (if it exists) so the channel can be
// cooperatively closed (if possible).
case req := <-s.chanCloseRequests:
chanID := lnwire.NewChanIDFromOutPoint(req.ChanPoint)
s.indexMtx.RLock()
link, ok := s.linkIndex[chanID]
if !ok {
s.indexMtx.RUnlock()
req.Err <- fmt.Errorf("no peer for channel with "+
"chan_id=%x", chanID[:])
continue
}
s.indexMtx.RUnlock()
peerPub := link.Peer().PubKey()
log.Debugf("Requesting local channel close: peer=%v, "+
"chan_id=%x", link.Peer(), chanID[:])
go s.cfg.LocalChannelClose(peerPub[:], req)
case resolutionMsg := <-s.resolutionMsgs:
pkt := &htlcPacket{
outgoingChanID: resolutionMsg.SourceChan,
outgoingHTLCID: resolutionMsg.HtlcIndex,
isResolution: true,
}
// Resolution messages will either be cancelling
// backwards an existing HTLC, or settling a previously
// outgoing HTLC. Based on this, we'll map the message
// to the proper htlcPacket.
if resolutionMsg.Failure != nil {
pkt.htlc = &lnwire.UpdateFailHTLC{}
} else {
pkt.htlc = &lnwire.UpdateFulfillHTLC{
PaymentPreimage: *resolutionMsg.PreImage,
}
}
log.Infof("Received outside contract resolution, "+
"mapping to: %v", spew.Sdump(pkt))
// We don't check the error, as the only failure we can
// encounter is due to the circuit already being
// closed. This is fine, as processing this message is
// meant to be idempotent.
err := s.handlePacketForward(pkt)
if err != nil {
log.Errorf("Unable to forward resolution msg: %v", err)
}
// With the message processed, we'll now close out
close(resolutionMsg.doneChan)
// A new packet has arrived for forwarding, we'll interpret the
// packet concretely, then either forward it along, or
// interpret a return packet to a locally initialized one.
case cmd := <-s.htlcPlex:
cmd.err <- s.handlePacketForward(cmd.pkt)
// When this time ticks, then it indicates that we should
// collect all the forwarding events since the last internal,
// and write them out to our log.
case <-s.cfg.FwdEventTicker.Ticks():
s.wg.Add(1)
go func() {
defer s.wg.Done()
if err := s.FlushForwardingEvents(); err != nil {
log.Errorf("unable to flush "+
"forwarding events: %v", err)
}
}()
// The log ticker has fired, so we'll calculate some forwarding
// stats for the last 10 seconds to display within the logs to
// users.
case <-s.cfg.LogEventTicker.Ticks():
// First, we'll collate the current running tally of
// our forwarding stats.
prevSatSent := totalSatSent
prevSatRecv := totalSatRecv
prevNumUpdates := totalNumUpdates
var (
newNumUpdates uint64
newSatSent btcutil.Amount
newSatRecv btcutil.Amount
)
// Next, we'll run through all the registered links and
// compute their up-to-date forwarding stats.
s.indexMtx.RLock()
for _, link := range s.linkIndex {
// TODO(roasbeef): when links first registered
// stats printed.
updates, sent, recv := link.Stats()
newNumUpdates += updates
newSatSent += sent.ToSatoshis()
newSatRecv += recv.ToSatoshis()
}
s.indexMtx.RUnlock()
var (
diffNumUpdates uint64
diffSatSent btcutil.Amount
diffSatRecv btcutil.Amount
)
// If this is the first time we're computing these
// stats, then the diff is just the new value. We do
// this in order to avoid integer underflow issues.
if prevNumUpdates == 0 {
diffNumUpdates = newNumUpdates
diffSatSent = newSatSent
diffSatRecv = newSatRecv
} else {
diffNumUpdates = newNumUpdates - prevNumUpdates
diffSatSent = newSatSent - prevSatSent
diffSatRecv = newSatRecv - prevSatRecv
}
// If the diff of num updates is zero, then we haven't
// forwarded anything in the last 10 seconds, so we can
// skip this update.
if diffNumUpdates == 0 {
continue
}
// If the diff of num updates is negative, then some
// links may have been unregistered from the switch, so
// we'll update our stats to only include our registered
// links.
if int64(diffNumUpdates) < 0 {
totalNumUpdates = newNumUpdates
totalSatSent = newSatSent
totalSatRecv = newSatRecv
continue
}
// Otherwise, we'll log this diff, then accumulate the
// new stats into the running total.
log.Debugf("Sent %d satoshis and received %d satoshis "+
"in the last 10 seconds (%f tx/sec)",
diffSatSent, diffSatRecv,
float64(diffNumUpdates)/10)
totalNumUpdates += diffNumUpdates
totalSatSent += diffSatSent
totalSatRecv += diffSatRecv
// The ack ticker has fired so if we have any settle/fail entries
// for a forwarding package to ack, we will do so here in a batch
// db call.
case <-s.cfg.AckEventTicker.Ticks():
// If the current set is empty, pause the ticker.
if len(s.pendingSettleFails) == 0 {
s.cfg.AckEventTicker.Pause()
continue
}
// Batch ack the settle/fail entries.
if err := s.ackSettleFail(s.pendingSettleFails...); err != nil {
log.Errorf("Unable to ack batch of settle/fails: %v", err)
continue
}
log.Tracef("Acked %d settle fails: %v", len(s.pendingSettleFails),
newLogClosure(func() string {
return spew.Sdump(s.pendingSettleFails)
}))
// Reset the pendingSettleFails buffer while keeping acquired
// memory.
s.pendingSettleFails = s.pendingSettleFails[:0]
case <-s.quit:
return
}
}
}
// Start starts all helper goroutines required for the operation of the switch.
func (s *Switch) Start() error {
if !atomic.CompareAndSwapInt32(&s.started, 0, 1) {
log.Warn("Htlc Switch already started")
return errors.New("htlc switch already started")
}
log.Infof("Starting HTLC Switch")
blockEpochStream, err := s.cfg.Notifier.RegisterBlockEpochNtfn(nil)
if err != nil {
return err
}
s.blockEpochStream = blockEpochStream
s.wg.Add(1)
go s.htlcForwarder()
if err := s.reforwardResponses(); err != nil {
s.Stop()
log.Errorf("unable to reforward responses: %v", err)
return err
}
return nil
}
// reforwardResponses for every known, non-pending channel, loads all associated
// forwarding packages and reforwards any Settle or Fail HTLCs found. This is
// used to resurrect the switch's mailboxes after a restart.
func (s *Switch) reforwardResponses() error {
openChannels, err := s.cfg.DB.FetchAllOpenChannels()
if err != nil {
return err
}
for _, openChannel := range openChannels {
shortChanID := openChannel.ShortChanID()
// Locally-initiated payments never need reforwarding.
if shortChanID == hop.Source {
continue
}
// If the channel is pending, it should have no forwarding
// packages, and nothing to reforward.
if openChannel.IsPending {
continue
}
// Channels in open or waiting-close may still have responses in
// their forwarding packages. We will continue to reattempt
// forwarding on startup until the channel is fully-closed.
//
// Load this channel's forwarding packages, and deliver them to
// the switch.
fwdPkgs, err := s.loadChannelFwdPkgs(shortChanID)
if err != nil {
log.Errorf("unable to load forwarding "+
"packages for %v: %v", shortChanID, err)
return err
}
s.reforwardSettleFails(fwdPkgs)
}
return nil
}
// loadChannelFwdPkgs loads all forwarding packages owned by the `source` short
// channel identifier.
func (s *Switch) loadChannelFwdPkgs(source lnwire.ShortChannelID) ([]*channeldb.FwdPkg, error) {
var fwdPkgs []*channeldb.FwdPkg
if err := kvdb.View(s.cfg.DB, func(tx kvdb.RTx) error {
var err error
fwdPkgs, err = s.cfg.SwitchPackager.LoadChannelFwdPkgs(
tx, source,
)
return err
}, func() {
fwdPkgs = nil
}); err != nil {
return nil, err
}
return fwdPkgs, nil
}
// reforwardSettleFails parses the Settle and Fail HTLCs from the list of
// forwarding packages, and reforwards those that have not been acknowledged.
// This is intended to occur on startup, in order to recover the switch's
// mailboxes, and to ensure that responses can be propagated in case the
// outgoing link never comes back online.
//
// NOTE: This should mimic the behavior processRemoteSettleFails.
func (s *Switch) reforwardSettleFails(fwdPkgs []*channeldb.FwdPkg) {
for _, fwdPkg := range fwdPkgs {
settleFails, err := lnwallet.PayDescsFromRemoteLogUpdates(
fwdPkg.Source, fwdPkg.Height, fwdPkg.SettleFails,
)
if err != nil {
log.Errorf("Unable to process remote log updates: %v",
err)
continue
}
switchPackets := make([]*htlcPacket, 0, len(settleFails))
for i, pd := range settleFails {
// Skip any settles or fails that have already been
// acknowledged by the incoming link that originated the
// forwarded Add.
if fwdPkg.SettleFailFilter.Contains(uint16(i)) {
continue
}
switch pd.EntryType {
// A settle for an HTLC we previously forwarded HTLC has
// been received. So we'll forward the HTLC to the
// switch which will handle propagating the settle to
// the prior hop.
case lnwallet.Settle:
settlePacket := &htlcPacket{
outgoingChanID: fwdPkg.Source,
outgoingHTLCID: pd.ParentIndex,
destRef: pd.DestRef,
htlc: &lnwire.UpdateFulfillHTLC{
PaymentPreimage: pd.RPreimage,
},
}
// Add the packet to the batch to be forwarded, and
// notify the overflow queue that a spare spot has been
// freed up within the commitment state.
switchPackets = append(switchPackets, settlePacket)
// A failureCode message for a previously forwarded HTLC has been
// received. As a result a new slot will be freed up in our
// commitment state, so we'll forward this to the switch so the
// backwards undo can continue.
case lnwallet.Fail:
// Fetch the reason the HTLC was canceled so
// we can continue to propagate it. This
// failure originated from another node, so
// the linkFailure field is not set on this
// packet.
failPacket := &htlcPacket{
outgoingChanID: fwdPkg.Source,
outgoingHTLCID: pd.ParentIndex,
destRef: pd.DestRef,
htlc: &lnwire.UpdateFailHTLC{
Reason: lnwire.OpaqueReason(pd.FailReason),
},
}
// Add the packet to the batch to be forwarded, and
// notify the overflow queue that a spare spot has been
// freed up within the commitment state.
switchPackets = append(switchPackets, failPacket)
}
}
// Since this send isn't tied to a specific link, we pass a nil
// link quit channel, meaning the send will fail only if the
// switch receives a shutdown request.
if err := s.ForwardPackets(nil, switchPackets...); err != nil {
log.Errorf("Unhandled error while reforwarding packets "+
"settle/fail over htlcswitch: %v", err)
}
}
}
// Stop gracefully stops all active helper goroutines, then waits until they've
// exited.
func (s *Switch) Stop() error {
if !atomic.CompareAndSwapInt32(&s.shutdown, 0, 1) {
log.Warn("Htlc Switch already stopped")
return errors.New("htlc switch already shutdown")
}
log.Infof("HTLC Switch shutting down")
close(s.quit)
s.wg.Wait()
// Wait until all active goroutines have finished exiting before
// stopping the mailboxes, otherwise the mailbox map could still be
// accessed and modified.
s.mailOrchestrator.Stop()
return nil
}
// AddLink is used to initiate the handling of the add link command. The
// request will be propagated and handled in the main goroutine.
func (s *Switch) AddLink(link ChannelLink) error {
s.indexMtx.Lock()
defer s.indexMtx.Unlock()
chanID := link.ChanID()
// First, ensure that this link is not already active in the switch.
_, err := s.getLink(chanID)
if err == nil {
return fmt.Errorf("unable to add ChannelLink(%v), already "+
"active", chanID)
}
// Get and attach the mailbox for this link, which buffers packets in
// case there packets that we tried to deliver while this link was
// offline.
shortChanID := link.ShortChanID()
mailbox := s.mailOrchestrator.GetOrCreateMailBox(chanID, shortChanID)
link.AttachMailBox(mailbox)
if err := link.Start(); err != nil {
s.removeLink(chanID)
return err
}
if shortChanID == hop.Source {
log.Infof("Adding pending link chan_id=%v, short_chan_id=%v",
chanID, shortChanID)
s.pendingLinkIndex[chanID] = link
} else {
log.Infof("Adding live link chan_id=%v, short_chan_id=%v",
chanID, shortChanID)
s.addLiveLink(link)
s.mailOrchestrator.BindLiveShortChanID(
mailbox, chanID, shortChanID,
)
}
return nil
}
// addLiveLink adds a link to all associated forwarding index, this makes it a
// candidate for forwarding HTLCs.
func (s *Switch) addLiveLink(link ChannelLink) {
// We'll add the link to the linkIndex which lets us quickly
// look up a channel when we need to close or register it, and
// the forwarding index which'll be used when forwarding HTLC's
// in the multi-hop setting.
s.linkIndex[link.ChanID()] = link
s.forwardingIndex[link.ShortChanID()] = link
// Next we'll add the link to the interface index so we can
// quickly look up all the channels for a particular node.
peerPub := link.Peer().PubKey()
if _, ok := s.interfaceIndex[peerPub]; !ok {
s.interfaceIndex[peerPub] = make(map[lnwire.ChannelID]ChannelLink)
}
s.interfaceIndex[peerPub][link.ChanID()] = link
}
// GetLink is used to initiate the handling of the get link command. The
// request will be propagated/handled to/in the main goroutine.
func (s *Switch) GetLink(chanID lnwire.ChannelID) (ChannelLink, error) {
s.indexMtx.RLock()
defer s.indexMtx.RUnlock()
return s.getLink(chanID)
}
// getLink returns the link stored in either the pending index or the live
// lindex.
func (s *Switch) getLink(chanID lnwire.ChannelID) (ChannelLink, error) {
link, ok := s.linkIndex[chanID]
if !ok {
link, ok = s.pendingLinkIndex[chanID]
if !ok {
return nil, ErrChannelLinkNotFound
}
}
return link, nil
}
// getLinkByShortID attempts to return the link which possesses the target
// short channel ID.
//
// NOTE: This MUST be called with the indexMtx held.
func (s *Switch) getLinkByShortID(chanID lnwire.ShortChannelID) (ChannelLink, error) {
link, ok := s.forwardingIndex[chanID]
if !ok {
return nil, ErrChannelLinkNotFound
}
return link, nil
}
// HasActiveLink returns true if the given channel ID has a link in the link
// index AND the link is eligible to forward.
func (s *Switch) HasActiveLink(chanID lnwire.ChannelID) bool {
s.indexMtx.RLock()
defer s.indexMtx.RUnlock()
if link, ok := s.linkIndex[chanID]; ok {
return link.EligibleToForward()
}
return false
}
// RemoveLink purges the switch of any link associated with chanID. If a pending
// or active link is not found, this method does nothing. Otherwise, the method
// returns after the link has been completely shutdown.
func (s *Switch) RemoveLink(chanID lnwire.ChannelID) {
s.indexMtx.Lock()
link := s.removeLink(chanID)
s.indexMtx.Unlock()
if link != nil {
link.Stop()
}
}
// removeLink is used to remove and stop the channel link.
//
// NOTE: This MUST be called with the indexMtx held.
func (s *Switch) removeLink(chanID lnwire.ChannelID) ChannelLink {
log.Infof("Removing channel link with ChannelID(%v)", chanID)
link, err := s.getLink(chanID)
if err != nil {
return nil
}
// Remove the channel from live link indexes.
delete(s.pendingLinkIndex, link.ChanID())
delete(s.linkIndex, link.ChanID())
delete(s.forwardingIndex, link.ShortChanID())
// If the link has been added to the peer index, then we'll move to
// delete the entry within the index.
peerPub := link.Peer().PubKey()
if peerIndex, ok := s.interfaceIndex[peerPub]; ok {
delete(peerIndex, link.ChanID())
// If after deletion, there are no longer any links, then we'll
// remove the interface map all together.
if len(peerIndex) == 0 {
delete(s.interfaceIndex, peerPub)
}
}
return link
}
// UpdateShortChanID updates the short chan ID for an existing channel. This is
// required in the case of a re-org and re-confirmation or a channel, or in the
// case that a link was added to the switch before its short chan ID was known.
func (s *Switch) UpdateShortChanID(chanID lnwire.ChannelID) error {
s.indexMtx.Lock()
defer s.indexMtx.Unlock()
// Locate the target link in the pending link index. If no such link
// exists, then we will ignore the request.
link, ok := s.pendingLinkIndex[chanID]
if !ok {
return fmt.Errorf("link %v not found", chanID)
}
oldShortChanID := link.ShortChanID()
// Try to update the link's short channel ID, returning early if this
// update failed.
shortChanID, err := link.UpdateShortChanID()
if err != nil {
return err
}
// Reject any blank short channel ids.
if shortChanID == hop.Source {
return fmt.Errorf("refusing trivial short_chan_id for chan_id=%v"+
"live link", chanID)
}
log.Infof("Updated short_chan_id for ChannelLink(%v): old=%v, new=%v",
chanID, oldShortChanID, shortChanID)
// Since the link was in the pending state before, we will remove it
// from the pending link index and add it to the live link index so that
// it can be available in forwarding.
delete(s.pendingLinkIndex, chanID)
s.addLiveLink(link)
// Finally, alert the mail orchestrator to the change of short channel
// ID, and deliver any unclaimed packets to the link.
mailbox := s.mailOrchestrator.GetOrCreateMailBox(chanID, shortChanID)
s.mailOrchestrator.BindLiveShortChanID(
mailbox, chanID, shortChanID,
)
return nil
}
// GetLinksByInterface fetches all the links connected to a particular node
// identified by the serialized compressed form of its public key.
func (s *Switch) GetLinksByInterface(hop [33]byte) ([]ChannelLink, error) {
s.indexMtx.RLock()
defer s.indexMtx.RUnlock()
return s.getLinks(hop)
}
// getLinks is function which returns the channel links of the peer by hop
// destination id.
//
// NOTE: This MUST be called with the indexMtx held.
func (s *Switch) getLinks(destination [33]byte) ([]ChannelLink, error) {
links, ok := s.interfaceIndex[destination]
if !ok {
return nil, ErrNoLinksFound
}
channelLinks := make([]ChannelLink, 0, len(links))
for _, link := range links {
channelLinks = append(channelLinks, link)
}
return channelLinks, nil
}
// CircuitModifier returns a reference to subset of the interfaces provided by
// the circuit map, to allow links to open and close circuits.
func (s *Switch) CircuitModifier() CircuitModifier {
return s.circuits
}
// CircuitLookup returns a reference to subset of the interfaces provided by the
// circuit map, to allow looking up circuits.
func (s *Switch) CircuitLookup() CircuitLookup {
return s.circuits
}
// commitCircuits persistently adds a circuit to the switch's circuit map.
func (s *Switch) commitCircuits(circuits ...*PaymentCircuit) (
*CircuitFwdActions, error) {
return s.circuits.CommitCircuits(circuits...)
}
// openCircuits preemptively writes the keystones for Adds that are about to be
// added to a commitment txn.
func (s *Switch) openCircuits(keystones ...Keystone) error {
return s.circuits.OpenCircuits(keystones...)
}
// deleteCircuits persistently removes the circuit, and keystone if present,
// from the circuit map.
func (s *Switch) deleteCircuits(inKeys ...CircuitKey) error {
return s.circuits.DeleteCircuits(inKeys...)
}
// FlushForwardingEvents flushes out the set of pending forwarding events to
// the persistent log. This will be used by the switch to periodically flush
// out the set of forwarding events to disk. External callers can also use this
// method to ensure all data is flushed to dis before querying the log.
func (s *Switch) FlushForwardingEvents() error {
// First, we'll obtain a copy of the current set of pending forwarding
// events.
s.fwdEventMtx.Lock()
// If we won't have any forwarding events, then we can exit early.
if len(s.pendingFwdingEvents) == 0 {
s.fwdEventMtx.Unlock()
return nil
}
events := make([]channeldb.ForwardingEvent, len(s.pendingFwdingEvents))
copy(events[:], s.pendingFwdingEvents[:])
// With the copy obtained, we can now clear out the header pointer of
// the current slice. This way, we can re-use the underlying storage
// allocated for the slice.
s.pendingFwdingEvents = s.pendingFwdingEvents[:0]
s.fwdEventMtx.Unlock()
// Finally, we'll write out the copied events to the persistent
// forwarding log.
return s.cfg.FwdingLog.AddForwardingEvents(events)
}
// BestHeight returns the best height known to the switch.
func (s *Switch) BestHeight() uint32 {
return atomic.LoadUint32(&s.bestHeight)
}