lnd.xprv/lnrpc
Olaoluwa Osuntokun d996607470
routing+lnrpc: extend BuildRoute to accept raw payAddr
In this commit, we extend the `BuildRoute` method and RPC on the router
sub-server to accept a raw payment address which will be included as
part of an MPP payload for the finla hop. This change actually also
allows users to craft their own MPP paths using BuildRoute+SendToRoute.
Our primary goal however, was to fix some broken itests since we now
require the payAddr to be present for ALL payments other than key send
payments.
2020-11-25 16:32:02 -08:00
..
autopilotrpc rpcserver+lnrpc: register REST subservers with root server 2020-06-04 08:50:44 +02:00
chainrpc lnrpc+macaroon: skip subserver macaroons on stateless_init 2020-11-07 11:24:35 +01:00
invoicesrpc Merge pull request #4423 from breez/enable-encode-invoice-via-rpc 2020-11-19 14:44:38 +01:00
lnclipb lnrpc: extract or add REST annotations to yaml 2020-06-04 08:50:00 +02:00
routerrpc routing+lnrpc: extend BuildRoute to accept raw payAddr 2020-11-25 16:32:02 -08:00
signrpc lnrpc+macaroon: skip subserver macaroons on stateless_init 2020-11-07 11:24:35 +01:00
verrpc rpcserver+lnrpc: register REST subservers with root server 2020-06-04 08:50:44 +02:00
walletrpc multi: fix verbose output for listsweeps and check all against wallet 2020-11-13 13:59:52 +02:00
watchtowerrpc rpcserver+lnrpc: register REST subservers with root server 2020-06-04 08:50:44 +02:00
wtclientrpc rpcserver+lnrpc: register REST subservers with root server 2020-06-04 08:50:44 +02:00
.clang-format make+travis: verify compiled protos on travis 2020-03-10 13:03:01 +01:00
file_utils.go invoicesrpc: add SubscribeSingleInvoice rpc 2019-02-01 09:43:17 +01:00
gen_protos.sh lnrpc: extract or add REST annotations to yaml 2020-06-04 08:50:00 +02:00
marshall_utils.go rpc: refactor request validation and response marshal into functions 2020-06-03 18:50:11 -07:00
README.md lnrpc+rpcserver: support list/delete on marcaroon IDs 2020-08-14 12:33:13 +08:00
rest-annotations.yaml lnrpc+walletrpc: add RPCs for new PSBT methods 2020-10-03 10:34:53 +02:00
rpc_utils.go lnrpc: ability to spend unconfirmed coins 2020-10-01 13:27:03 +01:00
rpc.pb.go multi: add channel open parameters to channel acceptor 2020-11-10 21:09:10 +02:00
rpc.pb.gw.go lnrpc+rpcserver: add ListPermissions RPC 2020-09-04 09:50:38 +02:00
rpc.proto multi: add channel open parameters to channel acceptor 2020-11-10 21:09:10 +02:00
rpc.swagger.json multi: allow specifying max csv for locally initiated channels 2020-11-04 13:55:39 +02:00
sub_server.go rpcserver+lnrpc: register REST subservers with root server 2020-06-04 08:50:44 +02:00
walletunlocker.pb.go lnrpc: add arguments for stateless wallet initialization to wallet unlocker 2020-11-07 11:18:52 +01:00
walletunlocker.pb.gw.go lnrpc: extract or add REST annotations to yaml 2020-06-04 08:50:00 +02:00
walletunlocker.proto lnrpc: add arguments for stateless wallet initialization to wallet unlocker 2020-11-07 11:18:52 +01:00
walletunlocker.swagger.json lnrpc: add arguments for stateless wallet initialization to wallet unlocker 2020-11-07 11:18:52 +01:00
websocket_proxy.go lnrpc: add macaroon workaround for WebSockets in browsers 2020-08-06 12:07:07 +02:00

lnrpc

Build Status MIT licensed GoDoc

This lnrpc package implements both a client and server for lnds RPC system which is based off of the high-performance cross-platform gRPC RPC framework. By default, only the Go client+server libraries are compiled within the package. In order to compile the client side libraries for other supported languages, the protoc tool will need to be used to generate the compiled protos for a specific language.

The following languages are supported as clients to lnrpc: C++, Go, Node.js, Java, Ruby, Android Java, PHP, Python, C#, Objective-C.

Service: Lightning

The list of defined RPCs on the service Lightning are the following (with a brief description):

  • WalletBalance
    • Returns the wallet's current confirmed balance in BTC.
  • ChannelBalance
    • Returns the daemons' available aggregate channel balance in BTC.
  • GetTransactions
    • Returns a list of on-chain transactions that pay to or are spends from lnd.
  • SendCoins
    • Sends an amount of satoshis to a specific address.
  • ListUnspent
    • Lists available utxos within a range of confirmations.
  • SubscribeTransactions
    • Returns a stream which sends async notifications each time a transaction is created or one is received that pays to us.
  • SendMany
    • Allows the caller to create a transaction with an arbitrary fan-out (many outputs).
  • NewAddress
    • Returns a new address, the following address types are supported: pay-to-witness-key-hash (p2wkh) and nested-pay-to-witness-key-hash (np2wkh).
  • SignMessage
    • Signs a message with the node's identity key and returns a zbase32 encoded signature.
  • VerifyMessage
    • Verifies a signature signed by another node on a message. The other node must be an active node in the channel database.
  • ConnectPeer
    • Connects to a peer identified by a public key and host.
  • DisconnectPeer
    • Disconnects a peer identified by a public key.
  • ListPeers
    • Lists all available connected peers.
  • GetInfo
    • Returns basic data concerning the daemon.
  • GetRecoveryInfo
    • Returns information about recovery process.
  • PendingChannels
    • List the number of pending (not fully confirmed) channels.
  • ListChannels
    • List all active channels the daemon manages.
  • OpenChannelSync
    • OpenChannelSync is a synchronous version of the OpenChannel RPC call.
  • OpenChannel
    • Attempts to open a channel to a target peer with a specific amount and push amount.
  • CloseChannel
    • Attempts to close a target channel. A channel can either be closed cooperatively if the channel peer is online, or using a "force" close to broadcast the latest channel state.
  • SendPayment
    • Send a payment over Lightning to a target peer.
  • SendPaymentSync
    • SendPaymentSync is the synchronous non-streaming version of SendPayment.
  • SendToRoute
    • Send a payment over Lightning to a target peer through a route explicitly defined by the user.
  • SendToRouteSync
    • SendToRouteSync is the synchronous non-streaming version of SendToRoute.
  • AddInvoice
    • Adds an invoice to the daemon. Invoices are automatically settled once seen as an incoming HTLC.
  • ListInvoices
    • Lists all stored invoices.
  • LookupInvoice
    • Attempts to look up an invoice by payment hash (r-hash).
  • SubscribeInvoices
    • Creates a uni-directional stream which receives async notifications as the daemon settles invoices
  • DecodePayReq
    • Decode a payment request, returning a full description of the conditions encoded within the payment request.
  • ListPayments
    • List all outgoing Lightning payments the daemon has made.
  • DeleteAllPayments
    • Deletes all outgoing payments from DB.
  • DescribeGraph
    • Returns a description of the known channel graph from the PoV of the node.
  • GetChanInfo
    • Returns information for a specific channel identified by channel ID.
  • GetNodeInfo
    • Returns information for a particular node identified by its identity public key.
  • QueryRoutes
    • Queries for a possible route to a target peer which can carry a certain amount of payment.
  • GetNetworkInfo
    • Returns some network level statistics.
  • StopDaemon
    • Sends a shutdown request to the interrupt handler, triggering a graceful shutdown of the daemon.
  • SubscribeChannelGraph
    • Creates a stream which receives async notifications upon any changes to the channel graph topology from the point of view of the responding node.
  • DebugLevel
    • Set logging verbosity of lnd programmatically
  • FeeReport
    • Allows the caller to obtain a report detailing the current fee schedule enforced by the node globally for each channel.
  • UpdateChannelPolicy
    • Allows the caller to update the fee schedule and channel policies for all channels globally, or a particular channel.
  • ForwardingHistory
    • ForwardingHistory allows the caller to query the htlcswitch for a record of all HTLCs forwarded.
  • BakeMacaroon
    • Bakes a new macaroon with the provided list of permissions and restrictions
  • ListMacaroonIDs
    • List all the macaroon root key IDs that are in use.
  • DeleteMacaroonID
    • Remove a specific macaroon root key ID from the database and invalidates all macaroons derived from the key with that ID.

Service: WalletUnlocker

The list of defined RPCs on the service WalletUnlocker are the following (with a brief description):

  • CreateWallet
    • Set encryption password for the wallet database.
  • UnlockWallet
    • Provide a password to unlock the wallet database.

Installation and Updating

$ go get -u github.com/lightningnetwork/lnd/lnrpc

Generate protobuf definitions

Linux

For linux there is an easy install script that is also used for the Travis CI build. Just run the following command (requires sudo permissions and the tools make, go, wget and unzip to be installed) from the repository's root folder:

./scripts/install_travis_proto.sh

MacOS / Unix like systems

  1. Download v.3.4.0 of protoc for your operating system and add it to your PATH. For example, if using macOS:
$ curl -LO https://github.com/google/protobuf/releases/download/v3.4.0/protoc-3.4.0-osx-x86_64.zip
$ unzip protoc-3.4.0-osx-x86_64.zip -d protoc
$ export PATH=$PWD/protoc/bin:$PATH
  1. Install golang/protobuf at version v1.3.2.
$ git clone https://github.com/golang/protobuf $GOPATH/src/github.com/golang/protobuf
$ cd $GOPATH/src/github.com/golang/protobuf
$ git reset --hard v1.3.2
$ make
  1. Install 'genproto' at commit 20e1ac93f88cf06d2b1defb90b9e9e126c7dfff6.
$ go get google.golang.org/genproto
$ cd $GOPATH/src/google.golang.org/genproto
$ git reset --hard 20e1ac93f88cf06d2b1defb90b9e9e126c7dfff6
  1. Install grpc-ecosystem/grpc-gateway at version v1.14.3.
$ git clone https://github.com/grpc-ecosystem/grpc-gateway $GOPATH/src/github.com/grpc-ecosystem/grpc-gateway
$ cd $GOPATH/src/github.com/grpc-ecosystem/grpc-gateway
$ git reset --hard v1.14.3
$ go install ./protoc-gen-grpc-gateway ./protoc-gen-swagger
  1. Run gen_protos.sh or make rpc to generate new protobuf definitions.

Format .proto files

We use clang-format to make sure the .proto files are formatted correctly. You can install the formatter on Ubuntu by running apt install clang-format.

Consult this page to find binaries for other operating systems or distributions.

Makefile commands

The following commands are available with make:

  • rpc: Compile .proto files (calls lnrpc/gen_protos.sh).
  • rpc-format: Formats all .proto files according to our formatting rules. Requires clang-format, see previous chapter.
  • rpc-check: Runs both previous commands and makes sure the git work tree is not dirty. This can be used to check that the .proto files are formatted and compiled properly.