lnd.xprv/lnwire/single_funding_request.go
Olaoluwa Osuntokun c8d978261b
lnwire: remove the Validate method from the Message interface
This commit revues the Validate method from the Message interface as
the method is no longer used and is a relic from an older version of
the codebase.
2017-04-19 15:03:51 -07:00

206 lines
6.5 KiB
Go

package lnwire
import (
"fmt"
"io"
"github.com/roasbeef/btcd/btcec"
"github.com/roasbeef/btcutil"
)
// SingleFundingRequest is the message Alice sends to Bob if we should like
// to create a channel with Bob where she's the sole provider of funds to the
// channel. Single funder channels simplify the initial funding workflow, are
// supported by nodes backed by SPV Bitcoin clients, and have a simpler
// security models than dual funded channels.
//
// NOTE: In order to avoid a slow loris like resource exhaustion attack, the
// responder of a single funding channel workflow *should not* watch the
// blockchain for the funding transaction. Instead, it is the initiator's job
// to provide the responder with an SPV proof of funding transaction inclusion
// after a sufficient number of confirmations.
type SingleFundingRequest struct {
// PendingChannelID serves to uniquely identify the future channel
// created by the initiated single funder workflow.
PendingChannelID [32]byte
// ChannelType represents the type of channel this request would like
// to open. At this point, the only supported channels are type 0
// channels, which are channels with regular commitment transactions
// utilizing HTLCs for payments.
ChannelType uint8
// CoinType represents which blockchain the channel will be opened
// using. By default, this field should be set to 0, indicating usage
// of the Bitcoin blockchain.
CoinType uint64
// FeePerKb is the required number of satoshis per KB that the
// requester will pay at all timers, for both the funding transaction
// and commitment transaction. This value can later be updated once the
// channel is open.
FeePerKb btcutil.Amount
// FundingAmount is the number of satoshis the initiator would like
// to commit to the channel.
FundingAmount btcutil.Amount
// PushSatoshis is the number of satoshis that will be pushed to the
// responder as a part of the first commitment state.
PushSatoshis btcutil.Amount
// CsvDelay is the number of blocks to use for the relative time lock
// in the pay-to-self output of both commitment transactions.
CsvDelay uint32
// CommitmentKey is key the initiator of the funding workflow wishes to
// use within their versino of the commitment transaction for any
// delayed (CSV) or immediate outputs to them.
CommitmentKey *btcec.PublicKey
// ChannelDerivationPoint is an secp256k1 point which will be used to
// derive the public key the initiator will use for the half of the
// 2-of-2 multi-sig. Using the channel derivation point (CDP), and the
// initiators identity public key (A), the channel public key is
// computed as: C = A + CDP. In order to be valid all CDP's MUST have
// an odd y-coordinate.
ChannelDerivationPoint *btcec.PublicKey
// DeliveryPkScript defines the public key script that the initiator
// would like to use to receive their balance in the case of a
// cooperative close. Only the following script templates are
// supported: P2PKH, P2WKH, P2SH, and P2WSH.
DeliveryPkScript PkScript
// DustLimit is the threshold below which no HTLC output should be
// generated for our commitment transaction; ie. HTLCs below
// this amount are not enforceable onchain from our point view.
DustLimit btcutil.Amount
// ConfirmationDepth is the number of confirmations that the initiator
// of a funding workflow is requesting be required before the channel
// is considered fully open.
ConfirmationDepth uint32
}
// NewSingleFundingRequest creates, and returns a new empty SingleFundingRequest.
func NewSingleFundingRequest(chanID [32]byte, chanType uint8, coinType uint64,
fee btcutil.Amount, amt btcutil.Amount, delay uint32, ck,
cdp *btcec.PublicKey, deliveryScript PkScript,
dustLimit btcutil.Amount, pushSat btcutil.Amount,
confDepth uint32) *SingleFundingRequest {
return &SingleFundingRequest{
PendingChannelID: chanID,
ChannelType: chanType,
CoinType: coinType,
FeePerKb: fee,
FundingAmount: amt,
CsvDelay: delay,
CommitmentKey: ck,
ChannelDerivationPoint: cdp,
DeliveryPkScript: deliveryScript,
DustLimit: dustLimit,
PushSatoshis: pushSat,
ConfirmationDepth: confDepth,
}
}
// Decode deserializes the serialized SingleFundingRequest stored in the passed
// io.Reader into the target SingleFundingRequest using the deserialization
// rules defined by the passed protocol version.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) Decode(r io.Reader, pver uint32) error {
return readElements(r,
c.PendingChannelID[:],
&c.ChannelType,
&c.CoinType,
&c.FeePerKb,
&c.FundingAmount,
&c.PushSatoshis,
&c.CsvDelay,
&c.CommitmentKey,
&c.ChannelDerivationPoint,
&c.DeliveryPkScript,
&c.DustLimit,
&c.ConfirmationDepth)
}
// Encode serializes the target SingleFundingRequest into the passed io.Writer
// implementation. Serialization will observe the rules defined by the passed
// protocol version.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) Encode(w io.Writer, pver uint32) error {
return writeElements(w,
c.PendingChannelID[:],
c.ChannelType,
c.CoinType,
c.FeePerKb,
c.FundingAmount,
c.PushSatoshis,
c.CsvDelay,
c.CommitmentKey,
c.ChannelDerivationPoint,
c.DeliveryPkScript,
c.DustLimit,
c.ConfirmationDepth)
}
// Command returns the uint32 code which uniquely identifies this message as a
// SingleFundingRequest on the wire.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) Command() uint32 {
return CmdSingleFundingRequest
}
// MaxPayloadLength returns the maximum allowed payload length for a
// SingleFundingRequest. This is calculated by summing the max length of all
// the fields within a SingleFundingRequest. To enforce a maximum
// DeliveryPkScript size, the size of a P2PKH public key script is used.
//
// This is part of the lnwire.Message interface.
func (c *SingleFundingRequest) MaxPayloadLength(uint32) uint32 {
var length uint32
// PendingChannelID - 32 bytes
length += 32
// ChannelType - 1 byte
length++
// CoinType - 8 bytes
length += 8
// FeePerKb - 8 bytes
length += 8
// FundingAmount - 8 bytes
length += 8
// PushSatoshis - 8 bytes
length += 8
// CsvDelay - 4 bytes
length += 4
// CommitmentKey - 33 bytes
length += 33
// ChannelDerivationPoint - 33 bytes
length += 33
// DeliveryPkScript - 25 bytes
length += 25
// DustLimit - 8 bytes
length += 8
// ConfirmationDepth - 4 bytes
length += 4
return length
}