akovalenko/lnd.xprv
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
af0fc09f62
lnd.xprv/routing/router_test.go
Johan T. Halseth a0f3624303
routing: delay initial zombie prune by 30 sec 
Since zombie pruning can be very slow on some devices (e.g. mobile) it
would stall lnd startup. Since it is not essential for pruning to be
finished for lnd to be functional, we instead delay the initial prune by
30 seconds.

Note that we could also wait for the graphPruneInterval to tick, but
since this is by default 2 hours, it is unlikely that a mobile app will
ever be open that long.
2021-03-30 11:04:13 +02:00

3112 lines
90 KiB
Go
Raw Blame History

package routing
import (
"bytes"
"fmt"
"image/color"
"math"
"math/rand"
"sync/atomic"
"testing"
"time"
"github.com/btcsuite/btcd/btcec"
"github.com/btcsuite/btcd/chaincfg/chainhash"
"github.com/btcsuite/btcd/wire"
"github.com/btcsuite/btcutil"
"github.com/davecgh/go-spew/spew"
"github.com/stretchr/testify/require"
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/clock"
"github.com/lightningnetwork/lnd/htlcswitch"
"github.com/lightningnetwork/lnd/lntypes"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/lightningnetwork/lnd/record"
"github.com/lightningnetwork/lnd/routing/route"
)
var uniquePaymentID uint64 = 1 // to be used atomically
type testCtx struct {
router *ChannelRouter
graph *channeldb.ChannelGraph
aliases map[string]route.Vertex
chain *mockChain
chainView *mockChainView
}
func (c *testCtx) RestartRouter() error {
// First, we'll reset the chainView's state as it doesn't persist the
// filter between restarts.
c.chainView.Reset()
// With the chainView reset, we'll now re-create the router itself, and
// start it.
router, err := New(Config{
Graph: c.graph,
Chain: c.chain,
ChainView: c.chainView,
Payer: &mockPaymentAttemptDispatcher{},
Control: makeMockControlTower(),
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
})
if err != nil {
return fmt.Errorf("unable to create router %v", err)
}
if err := router.Start(); err != nil {
return fmt.Errorf("unable to start router: %v", err)
}
// Finally, we'll swap out the pointer in the testCtx with this fresh
// instance of the router.
c.router = router
return nil
}
func createTestCtxFromGraphInstance(startingHeight uint32, graphInstance *testGraphInstance) (
*testCtx, func(), error) {
return createTestCtxFromGraphInstanceAssumeValid(
startingHeight, graphInstance, false,
)
}
func createTestCtxFromGraphInstanceAssumeValid(startingHeight uint32,
graphInstance *testGraphInstance, assumeValid bool) (*testCtx, func(), error) {
// We'll initialize an instance of the channel router with mock
// versions of the chain and channel notifier. As we don't need to test
// any p2p functionality, the peer send and switch send messages won't
// be populated.
chain := newMockChain(startingHeight)
chainView := newMockChainView(chain)
pathFindingConfig := PathFindingConfig{
MinProbability: 0.01,
AttemptCost: 100,
}
mcConfig := &MissionControlConfig{
ProbabilityEstimatorCfg: ProbabilityEstimatorCfg{
PenaltyHalfLife: time.Hour,
AprioriHopProbability: 0.9,
AprioriWeight: 0.5,
},
}
mc, err := NewMissionControl(
graphInstance.graph.Database(), route.Vertex{},
mcConfig,
)
if err != nil {
return nil, nil, err
}
sessionSource := &SessionSource{
Graph: graphInstance.graph,
QueryBandwidth: func(e *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi {
return lnwire.NewMSatFromSatoshis(e.Capacity)
},
PathFindingConfig: pathFindingConfig,
MissionControl: mc,
}
router, err := New(Config{
Graph: graphInstance.graph,
Chain: chain,
ChainView: chainView,
Payer: &mockPaymentAttemptDispatcher{},
Control: makeMockControlTower(),
MissionControl: mc,
SessionSource: sessionSource,
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
QueryBandwidth: func(e *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi {
return lnwire.NewMSatFromSatoshis(e.Capacity)
},
NextPaymentID: func() (uint64, error) {
next := atomic.AddUint64(&uniquePaymentID, 1)
return next, nil
},
PathFindingConfig: pathFindingConfig,
Clock: clock.NewTestClock(time.Unix(1, 0)),
AssumeChannelValid: assumeValid,
})
if err != nil {
return nil, nil, fmt.Errorf("unable to create router %v", err)
}
if err := router.Start(); err != nil {
return nil, nil, fmt.Errorf("unable to start router: %v", err)
}
ctx := &testCtx{
router: router,
graph: graphInstance.graph,
aliases: graphInstance.aliasMap,
chain: chain,
chainView: chainView,
}
cleanUp := func() {
ctx.router.Stop()
graphInstance.cleanUp()
}
return ctx, cleanUp, nil
}
func createTestCtxSingleNode(startingHeight uint32) (*testCtx, func(), error) {
var (
graph *channeldb.ChannelGraph
sourceNode *channeldb.LightningNode
cleanup func()
err error
)
graph, cleanup, err = makeTestGraph()
if err != nil {
return nil, nil, fmt.Errorf("unable to create test graph: %v", err)
}
sourceNode, err = createTestNode()
if err != nil {
return nil, nil, fmt.Errorf("unable to create source node: %v", err)
}
if err = graph.SetSourceNode(sourceNode); err != nil {
return nil, nil, fmt.Errorf("unable to set source node: %v", err)
}
graphInstance := &testGraphInstance{
graph: graph,
cleanUp: cleanup,
}
return createTestCtxFromGraphInstance(startingHeight, graphInstance)
}
func createTestCtxFromFile(startingHeight uint32, testGraph string) (*testCtx, func(), error) {
// We'll attempt to locate and parse out the file
// that encodes the graph that our tests should be run against.
graphInstance, err := parseTestGraph(testGraph)
if err != nil {
return nil, nil, fmt.Errorf("unable to create test graph: %v", err)
}
return createTestCtxFromGraphInstance(startingHeight, graphInstance)
}
// TestFindRoutesWithFeeLimit asserts that routes found by the FindRoutes method
// within the channel router contain a total fee less than or equal to the fee
// limit.
func TestFindRoutesWithFeeLimit(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(
startingBlockHeight, basicGraphFilePath,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// This test will attempt to find routes from roasbeef to sophon for 100
// satoshis with a fee limit of 10 satoshis. There are two routes from
// roasbeef to sophon:
// 1. roasbeef -> songoku -> sophon
// 2. roasbeef -> phamnuwen -> sophon
// The second route violates our fee limit, so we should only expect to
// see the first route.
target := ctx.aliases["sophon"]
paymentAmt := lnwire.NewMSatFromSatoshis(100)
restrictions := &RestrictParams{
FeeLimit: lnwire.NewMSatFromSatoshis(10),
ProbabilitySource: noProbabilitySource,
CltvLimit: math.MaxUint32,
}
route, err := ctx.router.FindRoute(
ctx.router.selfNode.PubKeyBytes,
target, paymentAmt, restrictions, nil, nil,
MinCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
if route.TotalFees() > restrictions.FeeLimit {
t.Fatalf("route exceeded fee limit: %v", spew.Sdump(route))
}
hops := route.Hops
if len(hops) != 2 {
t.Fatalf("expected 2 hops, got %d", len(hops))
}
if hops[0].PubKeyBytes != ctx.aliases["songoku"] {
t.Fatalf("expected first hop through songoku, got %s",
getAliasFromPubKey(hops[0].PubKeyBytes,
ctx.aliases))
}
}
// TestSendPaymentRouteFailureFallback tests that when sending a payment, if
// one of the target routes is seen as unavailable, then the next route in the
// queue is used instead. This process should continue until either a payment
// succeeds, or all routes have been exhausted.
func TestSendPaymentRouteFailureFallback(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to luo ji for 1000 satoshis, with a maximum of 1000 satoshis in fees.
var payHash [32]byte
paymentAmt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["sophon"],
Amount: paymentAmt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
// We'll modify the SendToSwitch method that's been set within the
// router's configuration to ignore the path that has son goku as the
// first hop. This should force the router to instead take the
// the more costly path (through pham nuwen).
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
roasbeefSongoku := lnwire.NewShortChanIDFromInt(12345)
if firstHop == roasbeefSongoku {
return [32]byte{}, htlcswitch.NewForwardingError(
// TODO(roasbeef): temp node failure
// should be?
&lnwire.FailTemporaryChannelFailure{},
1,
)
}
return preImage, nil
})
// Send off the payment request to the router, route through pham nuwen
// should've been selected as a fall back and succeeded correctly.
paymentPreImage, route, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
// The route selected should have two hops
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
// The route should have pham nuwen as the first hop.
if route.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] {
t.Fatalf("route should go through phamnuwen as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes,
ctx.aliases))
}
}
// TestChannelUpdateValidation tests that a failed payment with an associated
// channel update will only be applied to the graph when the update contains a
// valid signature.
func TestChannelUpdateValidation(t *testing.T) {
t.Parallel()
// Setup a three node network.
chanCapSat := btcutil.Amount(100000)
testChannels := []*testChannel{
symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 1),
symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 2),
}
testGraph, err := createTestGraphFromChannels(testChannels, "a")
defer testGraph.cleanUp()
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromGraphInstance(startingBlockHeight,
testGraph)
defer cleanUp()
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
// Assert that the initially configured fee is retrieved correctly.
_, policy, _, err := ctx.router.GetChannelByID(
lnwire.NewShortChanIDFromInt(1))
if err != nil {
t.Fatalf("cannot retrieve channel")
}
if policy.FeeProportionalMillionths != 400 {
t.Fatalf("invalid fee")
}
// Setup a route from source a to destination c. The route will be used
// in a call to SendToRoute. SendToRoute also applies channel updates,
// but it saves us from including RequestRoute in the test scope too.
hop1 := ctx.aliases["b"]
hop2 := ctx.aliases["c"]
hops := []*route.Hop{
{
ChannelID: 1,
PubKeyBytes: hop1,
LegacyPayload: true,
},
{
ChannelID: 2,
PubKeyBytes: hop2,
LegacyPayload: true,
},
}
rt, err := route.NewRouteFromHops(
lnwire.MilliSatoshi(10000), 100,
ctx.aliases["a"], hops,
)
if err != nil {
t.Fatalf("unable to create route: %v", err)
}
// Set up a channel update message with an invalid signature to be
// returned to the sender.
var invalidSignature [64]byte
errChanUpdate := lnwire.ChannelUpdate{
Signature: invalidSignature,
FeeRate: 500,
ShortChannelID: lnwire.NewShortChanIDFromInt(1),
Timestamp: uint32(testTime.Add(time.Minute).Unix()),
}
// We'll modify the SendToSwitch method so that it simulates a failed
// payment with an error originating from the first hop of the route.
// The unsigned channel update is attached to the failure message.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
return [32]byte{}, htlcswitch.NewForwardingError(
&lnwire.FailFeeInsufficient{
Update: errChanUpdate,
},
1,
)
})
// The payment parameter is mostly redundant in SendToRoute. Can be left
// empty for this test.
var payment lntypes.Hash
// Send off the payment request to the router. The specified route
// should be attempted and the channel update should be received by
// router and ignored because it is missing a valid signature.
_, err = ctx.router.SendToRoute(payment, rt)
if err == nil {
t.Fatalf("expected route to fail with channel update")
}
_, policy, _, err = ctx.router.GetChannelByID(
lnwire.NewShortChanIDFromInt(1))
if err != nil {
t.Fatalf("cannot retrieve channel")
}
if policy.FeeProportionalMillionths != 400 {
t.Fatalf("fee updated without valid signature")
}
// Next, add a signature to the channel update.
chanUpdateMsg, err := errChanUpdate.DataToSign()
if err != nil {
t.Fatal(err)
}
digest := chainhash.DoubleHashB(chanUpdateMsg)
sig, err := testGraph.privKeyMap["b"].Sign(digest)
if err != nil {
t.Fatal(err)
}
errChanUpdate.Signature, err = lnwire.NewSigFromSignature(sig)
if err != nil {
t.Fatal(err)
}
// Retry the payment using the same route as before.
_, err = ctx.router.SendToRoute(payment, rt)
if err == nil {
t.Fatalf("expected route to fail with channel update")
}
// This time a valid signature was supplied and the policy change should
// have been applied to the graph.
_, policy, _, err = ctx.router.GetChannelByID(
lnwire.NewShortChanIDFromInt(1))
if err != nil {
t.Fatalf("cannot retrieve channel")
}
if policy.FeeProportionalMillionths != 500 {
t.Fatalf("fee not updated even though signature is valid")
}
}
// TestSendPaymentErrorRepeatedFeeInsufficient tests that if we receive
// multiple fee related errors from a channel that we're attempting to route
// through, then we'll prune the channel after the second attempt.
func TestSendPaymentErrorRepeatedFeeInsufficient(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to luo ji for 100 satoshis.
var payHash [32]byte
amt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["sophon"],
Amount: amt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
// We'll also fetch the first outgoing channel edge from roasbeef to
// son goku. We'll obtain this as we'll need to to generate the
// FeeInsufficient error that we'll send back.
chanID := uint64(12345)
_, _, edgeUpdateToFail, err := ctx.graph.FetchChannelEdgesByID(chanID)
if err != nil {
t.Fatalf("unable to fetch chan id: %v", err)
}
errChanUpdate := lnwire.ChannelUpdate{
ShortChannelID: lnwire.NewShortChanIDFromInt(chanID),
Timestamp: uint32(edgeUpdateToFail.LastUpdate.Unix()),
MessageFlags: edgeUpdateToFail.MessageFlags,
ChannelFlags: edgeUpdateToFail.ChannelFlags,
TimeLockDelta: edgeUpdateToFail.TimeLockDelta,
HtlcMinimumMsat: edgeUpdateToFail.MinHTLC,
HtlcMaximumMsat: edgeUpdateToFail.MaxHTLC,
BaseFee: uint32(edgeUpdateToFail.FeeBaseMSat),
FeeRate: uint32(edgeUpdateToFail.FeeProportionalMillionths),
}
// We'll now modify the SendToSwitch method to return an error for the
// outgoing channel to Son goku. This will be a fee related error, so
// it should only cause the edge to be pruned after the second attempt.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
roasbeefSongoku := lnwire.NewShortChanIDFromInt(chanID)
if firstHop == roasbeefSongoku {
return [32]byte{}, htlcswitch.NewForwardingError(
// Within our error, we'll add a
// channel update which is meant to
// reflect the new fee schedule for the
// node/channel.
&lnwire.FailFeeInsufficient{
Update: errChanUpdate,
}, 1,
)
}
return preImage, nil
})
// Send off the payment request to the router, route through satoshi
// should've been selected as a fall back and succeeded correctly.
paymentPreImage, route, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
// The route selected should have two hops
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
// The route should have pham nuwen as the first hop.
if route.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] {
t.Fatalf("route should go through satoshi as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes,
ctx.aliases))
}
}
// TestSendPaymentErrorNonFinalTimeLockErrors tests that if we receive either
// an ExpiryTooSoon or a IncorrectCltvExpiry error from a node, then we prune
// that node from the available graph witin a mission control session. This
// test ensures that we'll route around errors due to nodes not knowing the
// current block height.
func TestSendPaymentErrorNonFinalTimeLockErrors(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to sophon for 1k satoshis.
var payHash [32]byte
amt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["sophon"],
Amount: amt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
// We'll also fetch the first outgoing channel edge from roasbeef to
// son goku. This edge will be included in the time lock related expiry
// errors that we'll get back due to disagrements in what the current
// block height is.
chanID := uint64(12345)
roasbeefSongoku := lnwire.NewShortChanIDFromInt(chanID)
_, _, edgeUpdateToFail, err := ctx.graph.FetchChannelEdgesByID(chanID)
if err != nil {
t.Fatalf("unable to fetch chan id: %v", err)
}
errChanUpdate := lnwire.ChannelUpdate{
ShortChannelID: lnwire.NewShortChanIDFromInt(chanID),
Timestamp: uint32(edgeUpdateToFail.LastUpdate.Unix()),
MessageFlags: edgeUpdateToFail.MessageFlags,
ChannelFlags: edgeUpdateToFail.ChannelFlags,
TimeLockDelta: edgeUpdateToFail.TimeLockDelta,
HtlcMinimumMsat: edgeUpdateToFail.MinHTLC,
HtlcMaximumMsat: edgeUpdateToFail.MaxHTLC,
BaseFee: uint32(edgeUpdateToFail.FeeBaseMSat),
FeeRate: uint32(edgeUpdateToFail.FeeProportionalMillionths),
}
// We'll now modify the SendToSwitch method to return an error for the
// outgoing channel to son goku. Since this is a time lock related
// error, we should fail the payment flow all together, as Goku is the
// only channel to Sophon.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefSongoku {
return [32]byte{}, htlcswitch.NewForwardingError(
&lnwire.FailExpiryTooSoon{
Update: errChanUpdate,
}, 1,
)
}
return preImage, nil
})
// assertExpectedPath is a helper function that asserts the returned
// route properly routes around the failure we've introduced in the
// graph.
assertExpectedPath := func(retPreImage [32]byte, route *route.Route) {
// The route selected should have two hops
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(retPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], retPreImage[:])
}
// The route should have satoshi as the first hop.
if route.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] {
t.Fatalf("route should go through phamnuwen as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes,
ctx.aliases))
}
}
// Send off the payment request to the router, this payment should
// succeed as we should actually go through Pham Nuwen in order to get
// to Sophon, even though he has higher fees.
paymentPreImage, rt, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
assertExpectedPath(paymentPreImage, rt)
// We'll now modify the error return an IncorrectCltvExpiry error
// instead, this should result in the same behavior of roasbeef routing
// around the faulty Son Goku node.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefSongoku {
return [32]byte{}, htlcswitch.NewForwardingError(
&lnwire.FailIncorrectCltvExpiry{
Update: errChanUpdate,
}, 1,
)
}
return preImage, nil
})
// Once again, Roasbeef should route around Goku since they disagree
// w.r.t to the block height, and instead go through Pham Nuwen. We
// flip a bit in the payment hash to allow resending this payment.
payment.PaymentHash[1] ^= 1
paymentPreImage, rt, err = ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
assertExpectedPath(paymentPreImage, rt)
}
// TestSendPaymentErrorPathPruning tests that the send of candidate routes
// properly gets pruned in response to ForwardingError response from the
// underlying SendToSwitch function.
func TestSendPaymentErrorPathPruning(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to luo ji for 1000 satoshis, with a maximum of 1000 satoshis in fees.
var payHash [32]byte
paymentAmt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["sophon"],
Amount: paymentAmt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
roasbeefSongoku := lnwire.NewShortChanIDFromInt(12345)
roasbeefPhanNuwen := lnwire.NewShortChanIDFromInt(999991)
// First, we'll modify the SendToSwitch method to return an error
// indicating that the channel from roasbeef to son goku is not operable
// with an UnknownNextPeer.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefSongoku {
// We'll first simulate an error from the first
// hop to simulate the channel from songoku to
// sophon not having enough capacity.
return [32]byte{}, htlcswitch.NewForwardingError(
&lnwire.FailTemporaryChannelFailure{},
1,
)
}
// Next, we'll create an error from phan nuwen to
// indicate that the sophon node is not longer online,
// which should prune out the rest of the routes.
if firstHop == roasbeefPhanNuwen {
return [32]byte{}, htlcswitch.NewForwardingError(
&lnwire.FailUnknownNextPeer{}, 1,
)
}
return preImage, nil
})
ctx.router.cfg.MissionControl.(*MissionControl).ResetHistory()
// When we try to dispatch that payment, we should receive an error as
// both attempts should fail and cause both routes to be pruned.
_, _, err = ctx.router.SendPayment(&payment)
if err == nil {
t.Fatalf("payment didn't return error")
}
// The final error returned should also indicate that the peer wasn't
// online (the last error we returned).
if err != channeldb.FailureReasonNoRoute {
t.Fatalf("expected no route instead got: %v", err)
}
// Inspect the two attempts that were made before the payment failed.
p, err := ctx.router.cfg.Control.FetchPayment(payHash)
if err != nil {
t.Fatal(err)
}
if len(p.HTLCs) != 2 {
t.Fatalf("expected two attempts got %v", len(p.HTLCs))
}
// We expect the first attempt to have failed with a
// TemporaryChannelFailure, the second with UnknownNextPeer.
msg := p.HTLCs[0].Failure.Message
if _, ok := msg.(*lnwire.FailTemporaryChannelFailure); !ok {
t.Fatalf("unexpected fail message: %T", msg)
}
msg = p.HTLCs[1].Failure.Message
if _, ok := msg.(*lnwire.FailUnknownNextPeer); !ok {
t.Fatalf("unexpected fail message: %T", msg)
}
ctx.router.cfg.MissionControl.(*MissionControl).ResetHistory()
// Next, we'll modify the SendToSwitch method to indicate that the
// connection between songoku and isn't up.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefSongoku {
failure := htlcswitch.NewForwardingError(
&lnwire.FailUnknownNextPeer{}, 1,
)
return [32]byte{}, failure
}
return preImage, nil
})
// This shouldn't return an error, as we'll make a payment attempt via
// the pham nuwen channel based on the assumption that there might be an
// intermittent issue with the songoku <-> sophon channel.
paymentPreImage, rt, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable send payment: %v", err)
}
// This path should go: roasbeef -> pham nuwen -> sophon
if len(rt.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(rt.Hops))
}
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
if rt.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] {
t.Fatalf("route should go through phamnuwen as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(rt.Hops[0].PubKeyBytes,
ctx.aliases))
}
ctx.router.cfg.MissionControl.(*MissionControl).ResetHistory()
// Finally, we'll modify the SendToSwitch function to indicate that the
// roasbeef -> luoji channel has insufficient capacity. This should
// again cause us to instead go via the satoshi route.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefSongoku {
// We'll first simulate an error from the first
// outgoing link to simulate the channel from luo ji to
// roasbeef not having enough capacity.
return [32]byte{}, htlcswitch.NewForwardingError(
&lnwire.FailTemporaryChannelFailure{},
1,
)
}
return preImage, nil
})
// We flip a bit in the payment hash to allow resending this payment.
payment.PaymentHash[1] ^= 1
paymentPreImage, rt, err = ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
// This should succeed finally. The route selected should have two
// hops.
if len(rt.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(rt.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
// The route should have satoshi as the first hop.
if rt.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] {
t.Fatalf("route should go through phamnuwen as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(rt.Hops[0].PubKeyBytes,
ctx.aliases))
}
}
// TestAddProof checks that we can update the channel proof after channel
// info was added to the database.
func TestAddProof(t *testing.T) {
t.Parallel()
ctx, cleanup, err := createTestCtxSingleNode(0)
if err != nil {
t.Fatal(err)
}
defer cleanup()
// Before creating out edge, we'll create two new nodes within the
// network that the channel will connect.
node1, err := createTestNode()
if err != nil {
t.Fatal(err)
}
node2, err := createTestNode()
if err != nil {
t.Fatal(err)
}
// In order to be able to add the edge we should have a valid funding
// UTXO within the blockchain.
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(),
100, 0)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
// After utxo was recreated adding the edge without the proof.
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: nil,
}
copy(edge.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Now we'll attempt to update the proof and check that it has been
// properly updated.
if err := ctx.router.AddProof(*chanID, &testAuthProof); err != nil {
t.Fatalf("unable to add proof: %v", err)
}
info, _, _, err := ctx.router.GetChannelByID(*chanID)
if err != nil {
t.Fatalf("unable to get channel: %v", err)
}
if info.AuthProof == nil {
t.Fatal("proof have been updated")
}
}
// TestIgnoreNodeAnnouncement tests that adding a node to the router that is
// not known from any channel announcement, leads to the announcement being
// ignored.
func TestIgnoreNodeAnnouncement(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight,
basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
pub := priv1.PubKey()
node := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(123, 0),
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node11",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(node.PubKeyBytes[:], pub.SerializeCompressed())
err = ctx.router.AddNode(node)
if !IsError(err, ErrIgnored) {
t.Fatalf("expected to get ErrIgnore, instead got: %v", err)
}
}
// TestIgnoreChannelEdgePolicyForUnknownChannel checks that a router will
// ignore a channel policy for a channel not in the graph.
func TestIgnoreChannelEdgePolicyForUnknownChannel(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
// Setup an initially empty network.
testChannels := []*testChannel{}
testGraph, err := createTestGraphFromChannels(
testChannels, "roasbeef",
)
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
defer testGraph.cleanUp()
ctx, cleanUp, err := createTestCtxFromGraphInstance(
startingBlockHeight, testGraph,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
var pub1 [33]byte
copy(pub1[:], priv1.PubKey().SerializeCompressed())
var pub2 [33]byte
copy(pub2[:], priv2.PubKey().SerializeCompressed())
// Add the edge between the two unknown nodes to the graph, and check
// that the nodes are found after the fact.
fundingTx, _, chanID, err := createChannelEdge(
ctx, bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(), 10000, 500,
)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
edgePolicy := &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
// Attempt to update the edge. This should be ignored, since the edge
// is not yet added to the router.
err = ctx.router.UpdateEdge(edgePolicy)
if !IsError(err, ErrIgnored) {
t.Fatalf("expected to get ErrIgnore, instead got: %v", err)
}
// Add the edge.
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("expected to be able to add edge to the channel graph,"+
" even though the vertexes were unknown: %v.", err)
}
// Now updating the edge policy should succeed.
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
}
// TestAddEdgeUnknownVertexes tests that if an edge is added that contains two
// vertexes which we don't know of, the edge should be available for use
// regardless. This is due to the fact that we don't actually need node
// announcements for the channel vertexes to be able to use the channel.
func TestAddEdgeUnknownVertexes(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(
startingBlockHeight, basicGraphFilePath,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
var pub1 [33]byte
copy(pub1[:], priv1.PubKey().SerializeCompressed())
var pub2 [33]byte
copy(pub2[:], priv2.PubKey().SerializeCompressed())
// The two nodes we are about to add should not exist yet.
_, exists1, err := ctx.graph.HasLightningNode(pub1)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if exists1 {
t.Fatalf("node already existed")
}
_, exists2, err := ctx.graph.HasLightningNode(pub2)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if exists2 {
t.Fatalf("node already existed")
}
// Add the edge between the two unknown nodes to the graph, and check
// that the nodes are found after the fact.
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500,
)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("expected to be able to add edge to the channel graph,"+
" even though the vertexes were unknown: %v.", err)
}
// We must add the edge policy to be able to use the edge for route
// finding.
edgePolicy := &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 0
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// Create edge in the other direction as well.
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 1
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// After adding the edge between the two previously unknown nodes, they
// should have been added to the graph.
_, exists1, err = ctx.graph.HasLightningNode(pub1)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if !exists1 {
t.Fatalf("node1 was not added to the graph")
}
_, exists2, err = ctx.graph.HasLightningNode(pub2)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if !exists2 {
t.Fatalf("node2 was not added to the graph")
}
// We will connect node1 to the rest of the test graph, and make sure
// we can find a route to node2, which will use the just added channel
// edge.
// We will connect node 1 to "sophon"
connectNode := ctx.aliases["sophon"]
connectNodeKey, err := btcec.ParsePubKey(connectNode[:], btcec.S256())
if err != nil {
t.Fatal(err)
}
var (
pubKey1 *btcec.PublicKey
pubKey2 *btcec.PublicKey
)
node1Bytes := priv1.PubKey().SerializeCompressed()
node2Bytes := connectNode
if bytes.Compare(node1Bytes[:], node2Bytes[:]) == -1 {
pubKey1 = priv1.PubKey()
pubKey2 = connectNodeKey
} else {
pubKey1 = connectNodeKey
pubKey2 = priv1.PubKey()
}
fundingTx, _, chanID, err = createChannelEdge(ctx,
pubKey1.SerializeCompressed(), pubKey2.SerializeCompressed(),
10000, 510)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock = &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge = &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
AuthProof: nil,
}
copy(edge.NodeKey1Bytes[:], node1Bytes)
edge.NodeKey2Bytes = node2Bytes
copy(edge.BitcoinKey1Bytes[:], node1Bytes)
edge.BitcoinKey2Bytes = node2Bytes
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge to the channel graph: %v.", err)
}
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 0
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 1
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// We should now be able to find a route to node 2.
paymentAmt := lnwire.NewMSatFromSatoshis(100)
targetNode := priv2.PubKey()
var targetPubKeyBytes route.Vertex
copy(targetPubKeyBytes[:], targetNode.SerializeCompressed())
_, err = ctx.router.FindRoute(
ctx.router.selfNode.PubKeyBytes,
targetPubKeyBytes, paymentAmt, noRestrictions, nil, nil,
MinCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
// Now check that we can update the node info for the partial node
// without messing up the channel graph.
n1 := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(123, 0),
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node11",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(n1.PubKeyBytes[:], priv1.PubKey().SerializeCompressed())
if err := ctx.router.AddNode(n1); err != nil {
t.Fatalf("could not add node: %v", err)
}
n2 := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(123, 0),
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node22",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(n2.PubKeyBytes[:], priv2.PubKey().SerializeCompressed())
if err := ctx.router.AddNode(n2); err != nil {
t.Fatalf("could not add node: %v", err)
}
// Should still be able to find the route, and the info should be
// updated.
_, err = ctx.router.FindRoute(
ctx.router.selfNode.PubKeyBytes,
targetPubKeyBytes, paymentAmt, noRestrictions, nil, nil,
MinCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
copy1, err := ctx.graph.FetchLightningNode(nil, pub1)
if err != nil {
t.Fatalf("unable to fetch node: %v", err)
}
if copy1.Alias != n1.Alias {
t.Fatalf("fetched node not equal to original")
}
copy2, err := ctx.graph.FetchLightningNode(nil, pub2)
if err != nil {
t.Fatalf("unable to fetch node: %v", err)
}
if copy2.Alias != n2.Alias {
t.Fatalf("fetched node not equal to original")
}
}
// TestWakeUpOnStaleBranch tests that upon startup of the ChannelRouter, if the
// the chain previously reflected in the channel graph is stale (overtaken by a
// longer chain), the channel router will prune the graph for any channels
// confirmed on the stale chain, and resync to the main chain.
func TestWakeUpOnStaleBranch(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
const chanValue = 10000
// chanID1 will not be reorged out.
var chanID1 uint64
// chanID2 will be reorged out.
var chanID2 uint64
// Create 10 common blocks, confirming chanID1.
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := startingBlockHeight + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID1 = chanID.ToUint64()
}
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
_, forkHeight, err := ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to ge best block: %v", err)
}
// Create 10 blocks on the minority chain, confirming chanID2.
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID2 = chanID.ToUint64()
}
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
// Now add the two edges to the channel graph, and check that they
// correctly show up in the database.
node1, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
node2, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
edge1 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID1,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge1); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
edge2 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID2,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge2.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge2.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge2); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Check that the fundingTxs are in the graph db.
_, _, has, isZombie, err := ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if !has {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
// Stop the router, so we can reorg the chain while its offline.
if err := ctx.router.Stop(); err != nil {
t.Fatalf("unable to stop router: %v", err)
}
// Create a 15 block fork.
for i := uint32(1); i <= 15; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
}
// Give time to process new blocks.
time.Sleep(time.Millisecond * 500)
// Create new router with same graph database.
router, err := New(Config{
Graph: ctx.graph,
Chain: ctx.chain,
ChainView: ctx.chainView,
Payer: &mockPaymentAttemptDispatcher{},
Control: makeMockControlTower(),
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
// We'll set the delay to zero to prune immediately.
FirstTimePruneDelay: 0,
})
if err != nil {
t.Fatalf("unable to create router %v", err)
}
// It should resync to the longer chain on startup.
if err := router.Start(); err != nil {
t.Fatalf("unable to start router: %v", err)
}
// The channel with chanID2 should not be in the database anymore,
// since it is not confirmed on the longest chain. chanID1 should
// still be.
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("did not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if has {
t.Fatalf("found edge in graph")
}
if isZombie {
t.Fatal("reorged edge should not be marked as zombie")
}
}
// TestDisconnectedBlocks checks that the router handles a reorg happening when
// it is active.
func TestDisconnectedBlocks(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
const chanValue = 10000
// chanID1 will not be reorged out, while chanID2 will be reorged out.
var chanID1, chanID2 uint64
// Create 10 common blocks, confirming chanID1.
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := startingBlockHeight + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID1 = chanID.ToUint64()
}
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
_, forkHeight, err := ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to get best block: %v", err)
}
// Create 10 blocks on the minority chain, confirming chanID2.
var minorityChain []*wire.MsgBlock
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID2 = chanID.ToUint64()
}
minorityChain = append(minorityChain, block)
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
// Now add the two edges to the channel graph, and check that they
// correctly show up in the database.
node1, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
node2, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
edge1 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID1,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
BitcoinKey1Bytes: node1.PubKeyBytes,
BitcoinKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge1); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
edge2 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID2,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
BitcoinKey1Bytes: node1.PubKeyBytes,
BitcoinKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge2.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge2.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge2); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Check that the fundingTxs are in the graph db.
_, _, has, isZombie, err := ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if !has {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
// Create a 15 block fork. We first let the chainView notify the router
// about stale blocks, before sending the now connected blocks. We do
// this because we expect this order from the chainview.
for i := len(minorityChain) - 1; i >= 0; i-- {
block := minorityChain[i]
height := uint32(forkHeight) + uint32(i) + 1
ctx.chainView.notifyStaleBlock(block.BlockHash(), height,
block.Transactions)
}
for i := uint32(1); i <= 15; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
block.Transactions)
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
// chanID2 should not be in the database anymore, since it is not
// confirmed on the longest chain. chanID1 should still be.
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("did not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if has {
t.Fatalf("found edge in graph")
}
if isZombie {
t.Fatal("reorged edge should not be marked as zombie")
}
}
// TestChansClosedOfflinePruneGraph tests that if channels we know of are
// closed while we're offline, then once we resume operation of the
// ChannelRouter, then the channels are properly pruned.
func TestRouterChansClosedOfflinePruneGraph(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
const chanValue = 10000
// First, we'll create a channel, to be mined shortly at height 102.
block102 := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
nextHeight := startingBlockHeight + 1
fundingTx1, chanUTXO, chanID1, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, uint32(nextHeight))
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block102.Transactions = append(block102.Transactions, fundingTx1)
ctx.chain.addBlock(block102, uint32(nextHeight), rand.Uint32())
ctx.chain.setBestBlock(int32(nextHeight))
ctx.chainView.notifyBlock(block102.BlockHash(), uint32(nextHeight),
[]*wire.MsgTx{})
// We'll now create the edges and nodes within the database required
// for the ChannelRouter to properly recognize the channel we added
// above.
node1, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
node2, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
edge1 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID1.ToUint64(),
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge1); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// The router should now be aware of the channel we created above.
_, _, hasChan, isZombie, err := ctx.graph.HasChannelEdge(chanID1.ToUint64())
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !hasChan {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
// With the transaction included, and the router's database state
// updated, we'll now mine 5 additional blocks on top of it.
for i := 0; i < 5; i++ {
nextHeight++
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
ctx.chain.addBlock(block, uint32(nextHeight), rand.Uint32())
ctx.chain.setBestBlock(int32(nextHeight))
ctx.chainView.notifyBlock(block.BlockHash(), uint32(nextHeight),
[]*wire.MsgTx{})
}
// At this point, our starting height should be 107.
_, chainHeight, err := ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to get best block: %v", err)
}
if chainHeight != 107 {
t.Fatalf("incorrect chain height: expected %v, got %v",
107, chainHeight)
}
// Next, we'll "shut down" the router in order to simulate downtime.
if err := ctx.router.Stop(); err != nil {
t.Fatalf("unable to shutdown router: %v", err)
}
// While the router is "offline" we'll mine 5 additional blocks, with
// the second block closing the channel we created above.
for i := 0; i < 5; i++ {
nextHeight++
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
if i == 2 {
// For the second block, we'll add a transaction that
// closes the channel we created above by spending the
// output.
closingTx := wire.NewMsgTx(2)
closingTx.AddTxIn(&wire.TxIn{
PreviousOutPoint: *chanUTXO,
})
block.Transactions = append(block.Transactions,
closingTx)
}
ctx.chain.addBlock(block, uint32(nextHeight), rand.Uint32())
ctx.chain.setBestBlock(int32(nextHeight))
ctx.chainView.notifyBlock(block.BlockHash(), uint32(nextHeight),
[]*wire.MsgTx{})
}
// At this point, our starting height should be 112.
_, chainHeight, err = ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to get best block: %v", err)
}
if chainHeight != 112 {
t.Fatalf("incorrect chain height: expected %v, got %v",
112, chainHeight)
}
// Now we'll re-start the ChannelRouter. It should recognize that it's
// behind the main chain and prune all the blocks that it missed while
// it was down.
ctx.RestartRouter()
// At this point, the channel that was pruned should no longer be known
// by the router.
_, _, hasChan, isZombie, err = ctx.graph.HasChannelEdge(chanID1.ToUint64())
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if hasChan {
t.Fatalf("channel was found in graph but shouldn't have been")
}
if isZombie {
t.Fatal("closed channel should not be marked as zombie")
}
}
// TestPruneChannelGraphStaleEdges ensures that we properly prune stale edges
// from the channel graph.
func TestPruneChannelGraphStaleEdges(t *testing.T) {
t.Parallel()
freshTimestamp := time.Now()
staleTimestamp := time.Unix(0, 0)
// We'll create the following test graph so that only the last channel
// is pruned.
testChannels := []*testChannel{
// No edges.
{
Node1: &testChannelEnd{Alias: "a"},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 1,
},
// Only one edge with a stale timestamp.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: staleTimestamp,
},
},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 2,
},
// Only one edge with a fresh timestamp.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: freshTimestamp,
},
},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 3,
},
// One edge fresh, one edge stale.
{
Node1: &testChannelEnd{
Alias: "c",
testChannelPolicy: &testChannelPolicy{
LastUpdate: freshTimestamp,
},
},
Node2: &testChannelEnd{
Alias: "d",
testChannelPolicy: &testChannelPolicy{
LastUpdate: staleTimestamp,
},
},
Capacity: 100000,
ChannelID: 4,
},
// Both edges fresh.
symmetricTestChannel("g", "h", 100000, &testChannelPolicy{
LastUpdate: freshTimestamp,
}, 5),
// Both edges stale, only one pruned.
symmetricTestChannel("e", "f", 100000, &testChannelPolicy{
LastUpdate: staleTimestamp,
}, 6),
}
// We'll create our test graph and router backed with these test
// channels we've created.
testGraph, err := createTestGraphFromChannels(testChannels, "a")
if err != nil {
t.Fatalf("unable to create test graph: %v", err)
}
defer testGraph.cleanUp()
const startingHeight = 100
ctx, cleanUp, err := createTestCtxFromGraphInstance(
startingHeight, testGraph,
)
if err != nil {
t.Fatalf("unable to create test context: %v", err)
}
defer cleanUp()
// All of the channels should exist before pruning them.
assertChannelsPruned(t, ctx.graph, testChannels)
// Proceed to prune the channels - only the last one should be pruned.
if err := ctx.router.pruneZombieChans(); err != nil {
t.Fatalf("unable to prune zombie channels: %v", err)
}
prunedChannel := testChannels[len(testChannels)-1].ChannelID
assertChannelsPruned(t, ctx.graph, testChannels, prunedChannel)
}
// TestPruneChannelGraphDoubleDisabled test that we can properly prune channels
// with both edges disabled from our channel graph.
func TestPruneChannelGraphDoubleDisabled(t *testing.T) {
t.Parallel()
t.Run("no_assumechannelvalid", func(t *testing.T) {
testPruneChannelGraphDoubleDisabled(t, false)
})
t.Run("assumechannelvalid", func(t *testing.T) {
testPruneChannelGraphDoubleDisabled(t, true)
})
}
func testPruneChannelGraphDoubleDisabled(t *testing.T, assumeValid bool) {
// We'll create the following test graph so that only the last channel
// is pruned. We'll use a fresh timestamp to ensure they're not pruned
// according to that heuristic.
timestamp := time.Now()
testChannels := []*testChannel{
// Channel from self shouldn't be pruned.
symmetricTestChannel(
"self", "a", 100000, &testChannelPolicy{
LastUpdate: timestamp,
Disabled: true,
}, 99,
),
// No edges.
{
Node1: &testChannelEnd{Alias: "a"},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 1,
},
// Only one edge disabled.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: timestamp,
Disabled: true,
},
},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 2,
},
// Only one edge enabled.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: timestamp,
Disabled: false,
},
},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 3,
},
// One edge disabled, one edge enabled.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: timestamp,
Disabled: true,
},
},
Node2: &testChannelEnd{
Alias: "b",
testChannelPolicy: &testChannelPolicy{
LastUpdate: timestamp,
Disabled: false,
},
},
Capacity: 100000,
ChannelID: 1,
},
// Both edges enabled.
symmetricTestChannel("c", "d", 100000, &testChannelPolicy{
LastUpdate: timestamp,
Disabled: false,
}, 2),
// Both edges disabled, only one pruned.
symmetricTestChannel("e", "f", 100000, &testChannelPolicy{
LastUpdate: timestamp,
Disabled: true,
}, 3),
}
// We'll create our test graph and router backed with these test
// channels we've created.
testGraph, err := createTestGraphFromChannels(testChannels, "self")
if err != nil {
t.Fatalf("unable to create test graph: %v", err)
}
defer testGraph.cleanUp()
const startingHeight = 100
ctx, cleanUp, err := createTestCtxFromGraphInstanceAssumeValid(
startingHeight, testGraph, assumeValid,
)
if err != nil {
t.Fatalf("unable to create test context: %v", err)
}
defer cleanUp()
// All the channels should exist within the graph before pruning them
// when not using AssumeChannelValid, otherwise we should have pruned
// the last channel on startup.
if !assumeValid {
assertChannelsPruned(t, ctx.graph, testChannels)
} else {
// Sleep to allow the pruning to finish.
time.Sleep(200 * time.Millisecond)
prunedChannel := testChannels[len(testChannels)-1].ChannelID
assertChannelsPruned(t, ctx.graph, testChannels, prunedChannel)
}
if err := ctx.router.pruneZombieChans(); err != nil {
t.Fatalf("unable to prune zombie channels: %v", err)
}
// If we attempted to prune them without AssumeChannelValid being set,
// none should be pruned. Otherwise the last channel should still be
// pruned.
if !assumeValid {
assertChannelsPruned(t, ctx.graph, testChannels)
} else {
prunedChannel := testChannels[len(testChannels)-1].ChannelID
assertChannelsPruned(t, ctx.graph, testChannels, prunedChannel)
}
}
// TestFindPathFeeWeighting tests that the findPath method will properly prefer
// routes with lower fees over routes with lower time lock values. This is
// meant to exercise the fact that the internal findPath method ranks edges
// with the square of the total fee in order bias towards lower fees.
func TestFindPathFeeWeighting(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
sourceNode, err := ctx.graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
amt := lnwire.MilliSatoshi(100)
target := ctx.aliases["luoji"]
// We'll now attempt a path finding attempt using this set up. Due to
// the edge weighting, we should select the direct path over the 2 hop
// path even though the direct path has a higher potential time lock.
path, err := dbFindPath(
ctx.graph, nil, nil,
noRestrictions,
testPathFindingConfig,
sourceNode.PubKeyBytes, target, amt, 0,
)
if err != nil {
t.Fatalf("unable to find path: %v", err)
}
// The route that was chosen should be exactly one hop, and should be
// directly to luoji.
if len(path) != 1 {
t.Fatalf("expected path length of 1, instead was: %v", len(path))
}
if path[0].Node.Alias != "luoji" {
t.Fatalf("wrong node: %v", path[0].Node.Alias)
}
}
// TestIsStaleNode tests that the IsStaleNode method properly detects stale
// node announcements.
func TestIsStaleNode(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Before we can insert a node in to the database, we need to create a
// channel that it's linked to.
var (
pub1 [33]byte
pub2 [33]byte
)
copy(pub1[:], priv1.PubKey().SerializeCompressed())
copy(pub2[:], priv2.PubKey().SerializeCompressed())
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Before we add the node, if we query for staleness, we should get
// false, as we haven't added the full node.
updateTimeStamp := time.Unix(123, 0)
if ctx.router.IsStaleNode(pub1, updateTimeStamp) {
t.Fatalf("incorrectly detected node as stale")
}
// With the node stub in the database, we'll add the fully node
// announcement to the database.
n1 := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: updateTimeStamp,
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node11",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(n1.PubKeyBytes[:], priv1.PubKey().SerializeCompressed())
if err := ctx.router.AddNode(n1); err != nil {
t.Fatalf("could not add node: %v", err)
}
// If we use the same timestamp and query for staleness, we should get
// true.
if !ctx.router.IsStaleNode(pub1, updateTimeStamp) {
t.Fatalf("failure to detect stale node update")
}
// If we update the timestamp and once again query for staleness, it
// should report false.
newTimeStamp := time.Unix(1234, 0)
if ctx.router.IsStaleNode(pub1, newTimeStamp) {
t.Fatalf("incorrectly detected node as stale")
}
}
// TestIsKnownEdge tests that the IsKnownEdge method properly detects stale
// channel announcements.
func TestIsKnownEdge(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// First, we'll create a new channel edge (just the info) and insert it
// into the database.
var (
pub1 [33]byte
pub2 [33]byte
)
copy(pub1[:], priv1.PubKey().SerializeCompressed())
copy(pub2[:], priv2.PubKey().SerializeCompressed())
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Now that the edge has been inserted, query is the router already
// knows of the edge should return true.
if !ctx.router.IsKnownEdge(*chanID) {
t.Fatalf("router should detect edge as known")
}
}
// TestIsStaleEdgePolicy tests that the IsStaleEdgePolicy properly detects
// stale channel edge update announcements.
func TestIsStaleEdgePolicy(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight,
basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// First, we'll create a new channel edge (just the info) and insert it
// into the database.
var (
pub1 [33]byte
pub2 [33]byte
)
copy(pub1[:], priv1.PubKey().SerializeCompressed())
copy(pub2[:], priv2.PubKey().SerializeCompressed())
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
// If we query for staleness before adding the edge, we should get
// false.
updateTimeStamp := time.Unix(123, 0)
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) {
t.Fatalf("router failed to detect fresh edge policy")
}
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) {
t.Fatalf("router failed to detect fresh edge policy")
}
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// We'll also add two edge policies, one for each direction.
edgePolicy := &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: updateTimeStamp,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 0
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: updateTimeStamp,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 1
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// Now that the edges have been added, an identical (chanID, flag,
// timestamp) tuple for each edge should be detected as a stale edge.
if !ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) {
t.Fatalf("router failed to detect stale edge policy")
}
if !ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) {
t.Fatalf("router failed to detect stale edge policy")
}
// If we now update the timestamp for both edges, the router should
// detect that this tuple represents a fresh edge.
updateTimeStamp = time.Unix(9999, 0)
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) {
t.Fatalf("router failed to detect fresh edge policy")
}
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) {
t.Fatalf("router failed to detect fresh edge policy")
}
}
// TestEmptyRoutesGenerateSphinxPacket tests that the generateSphinxPacket
// function is able to gracefully handle being passed a nil set of hops for the
// route by the caller.
func TestEmptyRoutesGenerateSphinxPacket(t *testing.T) {
t.Parallel()
sessionKey, _ := btcec.NewPrivateKey(btcec.S256())
emptyRoute := &route.Route{}
_, _, err := generateSphinxPacket(emptyRoute, testHash[:], sessionKey)
if err != route.ErrNoRouteHopsProvided {
t.Fatalf("expected empty hops error: instead got: %v", err)
}
}
// TestUnknownErrorSource tests that if the source of an error is unknown, all
// edges along the route will be pruned.
func TestUnknownErrorSource(t *testing.T) {
t.Parallel()
// Setup a network. It contains two paths to c: a->b->c and an
// alternative a->d->c.
chanCapSat := btcutil.Amount(100000)
testChannels := []*testChannel{
symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 1),
symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 3),
symmetricTestChannel("a", "d", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
FeeBaseMsat: 100000,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 2),
symmetricTestChannel("d", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
FeeBaseMsat: 100000,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 4),
}
testGraph, err := createTestGraphFromChannels(testChannels, "a")
defer testGraph.cleanUp()
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromGraphInstance(startingBlockHeight,
testGraph)
defer cleanUp()
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
// Create a payment to node c.
payment := LightningPayment{
Target: ctx.aliases["c"],
Amount: lnwire.NewMSatFromSatoshis(1000),
FeeLimit: noFeeLimit,
PaymentHash: lntypes.Hash{},
}
// We'll modify the SendToSwitch method so that it simulates hop b as a
// node that returns an unparsable failure if approached via the a->b
// channel.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
// If channel a->b is used, return an error without
// source and message. The sender won't know the origin
// of the error.
if firstHop.ToUint64() == 1 {
return [32]byte{},
htlcswitch.ErrUnreadableFailureMessage
}
// Otherwise the payment succeeds.
return lntypes.Preimage{}, nil
})
// Send off the payment request to the router. The expectation is that
// the route a->b->c is tried first. An unreadable faiure is returned
// which should pruning the channel a->b. We expect the payment to
// succeed via a->d.
_, _, err = ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("expected payment to succeed, but got: %v", err)
}
// Next we modify payment result to return an unknown failure.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
// If channel a->b is used, simulate that the failure
// couldn't be decoded (FailureMessage is nil).
if firstHop.ToUint64() == 2 {
return [32]byte{},
htlcswitch.NewUnknownForwardingError(1)
}
// Otherwise the payment succeeds.
return lntypes.Preimage{}, nil
})
// Send off the payment request to the router. We expect the payment to
// fail because both routes have been pruned.
payment.PaymentHash = lntypes.Hash{1}
_, _, err = ctx.router.SendPayment(&payment)
if err == nil {
t.Fatalf("expected payment to fail")
}
}
// assertChannelsPruned ensures that only the given channels are pruned from the
// graph out of the set of all channels.
func assertChannelsPruned(t *testing.T, graph *channeldb.ChannelGraph,
channels []*testChannel, prunedChanIDs ...uint64) {
t.Helper()
pruned := make(map[uint64]struct{}, len(channels))
for _, chanID := range prunedChanIDs {
pruned[chanID] = struct{}{}
}
for _, channel := range channels {
_, shouldPrune := pruned[channel.ChannelID]
_, _, exists, isZombie, err := graph.HasChannelEdge(
channel.ChannelID,
)
if err != nil {
t.Fatalf("unable to determine existence of "+
"channel=%v in the graph: %v",
channel.ChannelID, err)
}
if !shouldPrune && !exists {
t.Fatalf("expected channel=%v to exist within "+
"the graph", channel.ChannelID)
}
if shouldPrune && exists {
t.Fatalf("expected channel=%v to not exist "+
"within the graph", channel.ChannelID)
}
if !shouldPrune && isZombie {
t.Fatalf("expected channel=%v to not be marked "+
"as zombie", channel.ChannelID)
}
if shouldPrune && !isZombie {
t.Fatalf("expected channel=%v to be marked as "+
"zombie", channel.ChannelID)
}
}
}
// TestSendToRouteStructuredError asserts that SendToRoute returns a structured
// error.
func TestSendToRouteStructuredError(t *testing.T) {
t.Parallel()
// Setup a three node network.
chanCapSat := btcutil.Amount(100000)
testChannels := []*testChannel{
symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 1),
symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 2),
}
testGraph, err := createTestGraphFromChannels(testChannels, "a")
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
defer testGraph.cleanUp()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromGraphInstance(
startingBlockHeight, testGraph,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Set up an init channel for the control tower, such that we can make
// sure the payment is initiated correctly.
init := make(chan initArgs, 1)
ctx.router.cfg.Control.(*mockControlTower).init = init
// Setup a route from source a to destination c. The route will be used
// in a call to SendToRoute. SendToRoute also applies channel updates,
// but it saves us from including RequestRoute in the test scope too.
const payAmt = lnwire.MilliSatoshi(10000)
hop1 := ctx.aliases["b"]
hop2 := ctx.aliases["c"]
hops := []*route.Hop{
{
ChannelID: 1,
PubKeyBytes: hop1,
AmtToForward: payAmt,
LegacyPayload: true,
},
{
ChannelID: 2,
PubKeyBytes: hop2,
AmtToForward: payAmt,
LegacyPayload: true,
},
}
rt, err := route.NewRouteFromHops(payAmt, 100, ctx.aliases["a"], hops)
if err != nil {
t.Fatalf("unable to create route: %v", err)
}
// We'll modify the SendToSwitch method so that it simulates a failed
// payment with an error originating from the first hop of the route.
// The unsigned channel update is attached to the failure message.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
return [32]byte{}, htlcswitch.NewForwardingError(
&lnwire.FailFeeInsufficient{
Update: lnwire.ChannelUpdate{},
}, 1,
)
})
// The payment parameter is mostly redundant in SendToRoute. Can be left
// empty for this test.
var payment lntypes.Hash
// Send off the payment request to the router. The specified route
// should be attempted and the channel update should be received by
// router and ignored because it is missing a valid signature.
_, err = ctx.router.SendToRoute(payment, rt)
fErr, ok := err.(*htlcswitch.ForwardingError)
if !ok {
t.Fatalf("expected forwarding error")
}
if _, ok := fErr.WireMessage().(*lnwire.FailFeeInsufficient); !ok {
t.Fatalf("expected fee insufficient error")
}
// Check that the correct values were used when initiating the payment.
select {
case initVal := <-init:
if initVal.c.Value != payAmt {
t.Fatalf("expected %v, got %v", payAmt, initVal.c.Value)
}
case <-time.After(100 * time.Millisecond):
t.Fatalf("initPayment not called")
}
}
// TestSendToRouteMultiShardSend checks that a 3-shard payment can be executed
// using SendToRoute.
func TestSendToRouteMultiShardSend(t *testing.T) {
t.Parallel()
ctx, cleanup, err := createTestCtxSingleNode(0)
if err != nil {
t.Fatal(err)
}
defer cleanup()
const numShards = 3
const payAmt = lnwire.MilliSatoshi(numShards * 10000)
node, err := createTestNode()
if err != nil {
t.Fatal(err)
}
// Create a simple 1-hop route that we will use for all three shards.
hops := []*route.Hop{
{
ChannelID: 1,
PubKeyBytes: node.PubKeyBytes,
AmtToForward: payAmt / numShards,
MPP: record.NewMPP(payAmt, [32]byte{}),
},
}
sourceNode, err := ctx.graph.SourceNode()
if err != nil {
t.Fatal(err)
}
rt, err := route.NewRouteFromHops(
payAmt, 100, sourceNode.PubKeyBytes, hops,
)
if err != nil {
t.Fatalf("unable to create route: %v", err)
}
// The first shard we send we'll fail immediately, to check that we are
// still allowed to retry with other shards after a failed one.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
return [32]byte{}, htlcswitch.NewForwardingError(
&lnwire.FailFeeInsufficient{
Update: lnwire.ChannelUpdate{},
}, 1,
)
})
// The payment parameter is mostly redundant in SendToRoute. Can be left
// empty for this test.
var payment lntypes.Hash
// Send the shard using the created route, and expect an error to be
// returned.
_, err = ctx.router.SendToRoute(payment, rt)
if err == nil {
t.Fatalf("expected forwarding error")
}
// Now we'll modify the SendToSwitch method again to wait until all
// three shards are initiated before returning a result. We do this by
// signalling when the method has been called, and then stop to wait
// for the test to deliver the final result on the channel below.
waitForResultSignal := make(chan struct{}, numShards)
results := make(chan lntypes.Preimage, numShards)
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
// Signal that the shard has been initiated and is
// waiting for a result.
waitForResultSignal <- struct{}{}
// Wait for a result before returning it.
res, ok := <-results
if !ok {
return [32]byte{}, fmt.Errorf("failure")
}
return res, nil
})
// Launch three shards by calling SendToRoute in three goroutines,
// returning their final error on the channel.
errChan := make(chan error)
successes := make(chan lntypes.Preimage)
for i := 0; i < numShards; i++ {
go func() {
attempt, err := ctx.router.SendToRoute(payment, rt)
if err != nil {
errChan <- err
return
}
successes <- attempt.Settle.Preimage
}()
}
// Wait for all shards to signal they have been initiated.
for i := 0; i < numShards; i++ {
select {
case <-waitForResultSignal:
case <-time.After(5 * time.Second):
t.Fatalf("not waiting for results")
}
}
// Deliver a dummy preimage to all the shard handlers.
preimage := lntypes.Preimage{}
preimage[4] = 42
for i := 0; i < numShards; i++ {
results <- preimage
}
// Finally expect all shards to return with the above preimage.
for i := 0; i < numShards; i++ {
select {
case p := <-successes:
if p != preimage {
t.Fatalf("preimage mismatch")
}
case err := <-errChan:
t.Fatalf("unexpected error from SendToRoute: %v", err)
case <-time.After(5 * time.Second):
t.Fatalf("result not received")
}
}
}
// TestSendToRouteMaxHops asserts that SendToRoute fails when using a route that
// exceeds the maximum number of hops.
func TestSendToRouteMaxHops(t *testing.T) {
t.Parallel()
// Setup a two node network.
chanCapSat := btcutil.Amount(100000)
testChannels := []*testChannel{
symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 1),
}
testGraph, err := createTestGraphFromChannels(testChannels, "a")
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
defer testGraph.cleanUp()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromGraphInstance(
startingBlockHeight, testGraph,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Create a 30 hop route that exceeds the maximum hop limit.
const payAmt = lnwire.MilliSatoshi(10000)
hopA := ctx.aliases["a"]
hopB := ctx.aliases["b"]
var hops []*route.Hop
for i := 0; i < 15; i++ {
hops = append(hops, &route.Hop{
ChannelID: 1,
PubKeyBytes: hopB,
AmtToForward: payAmt,
LegacyPayload: true,
})
hops = append(hops, &route.Hop{
ChannelID: 1,
PubKeyBytes: hopA,
AmtToForward: payAmt,
LegacyPayload: true,
})
}
rt, err := route.NewRouteFromHops(payAmt, 100, ctx.aliases["a"], hops)
if err != nil {
t.Fatalf("unable to create route: %v", err)
}
// Send off the payment request to the router. We expect an error back
// indicating that the route is too long.
var payment lntypes.Hash
_, err = ctx.router.SendToRoute(payment, rt)
if err != route.ErrMaxRouteHopsExceeded {
t.Fatalf("expected ErrMaxRouteHopsExceeded, but got %v", err)
}
}
// TestBuildRoute tests whether correct routes are built.
func TestBuildRoute(t *testing.T) {
// Setup a three node network.
chanCapSat := btcutil.Amount(100000)
paymentAddrFeatures := lnwire.NewFeatureVector(
lnwire.NewRawFeatureVector(lnwire.PaymentAddrOptional),
lnwire.Features,
)
testChannels := []*testChannel{
// Create two local channels from a. The bandwidth is estimated
// in this test as the channel capacity. For building routes, we
// expected the channel with the largest estimated bandwidth to
// be selected.
symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 20000,
MinHTLC: lnwire.NewMSatFromSatoshis(5),
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 1),
symmetricTestChannel("a", "b", chanCapSat/2, &testChannelPolicy{
Expiry: 144,
FeeRate: 20000,
MinHTLC: lnwire.NewMSatFromSatoshis(5),
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat / 2),
}, 6),
// Create two channels from b to c. For building routes, we
// expect the lowest cost channel to be selected. Note that this
// isn't a situation that we are expecting in reality. Routing
// nodes are recommended to keep their channel policies towards
// the same peer identical.
symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 50000,
MinHTLC: lnwire.NewMSatFromSatoshis(20),
MaxHTLC: lnwire.NewMSatFromSatoshis(120),
Features: paymentAddrFeatures,
}, 2),
symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 60000,
MinHTLC: lnwire.NewMSatFromSatoshis(20),
MaxHTLC: lnwire.NewMSatFromSatoshis(120),
Features: paymentAddrFeatures,
}, 7),
symmetricTestChannel("a", "e", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 80000,
MinHTLC: lnwire.NewMSatFromSatoshis(5),
MaxHTLC: lnwire.NewMSatFromSatoshis(10),
Features: paymentAddrFeatures,
}, 5),
symmetricTestChannel("e", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 100000,
MinHTLC: lnwire.NewMSatFromSatoshis(20),
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
Features: paymentAddrFeatures,
}, 4),
}
testGraph, err := createTestGraphFromChannels(testChannels, "a")
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
defer testGraph.cleanUp()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromGraphInstance(
startingBlockHeight, testGraph,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
checkHops := func(rt *route.Route, expected []uint64,
payAddr [32]byte) {
t.Helper()
if len(rt.Hops) != len(expected) {
t.Fatal("hop count mismatch")
}
for i, hop := range rt.Hops {
if hop.ChannelID != expected[i] {
t.Fatalf("expected channel %v at pos %v, but "+
"got channel %v",
expected[i], i, hop.ChannelID)
}
}
lastHop := rt.Hops[len(rt.Hops)-1]
require.NotNil(t, lastHop.MPP)
require.Equal(t, lastHop.MPP.PaymentAddr(), payAddr)
}
var payAddr [32]byte
_, err = rand.Read(payAddr[:])
require.NoError(t, err)
// Create hop list from the route node pubkeys.
hops := []route.Vertex{
ctx.aliases["b"], ctx.aliases["c"],
}
amt := lnwire.NewMSatFromSatoshis(100)
// Build the route for the given amount.
rt, err := ctx.router.BuildRoute(
&amt, hops, nil, 40, &payAddr,
)
if err != nil {
t.Fatal(err)
}
// Check that we get the expected route back. The total amount should be
// the amount to deliver to hop c (100 sats) plus the max fee for the
// connection b->c (6 sats).
checkHops(rt, []uint64{1, 7}, payAddr)
if rt.TotalAmount != 106000 {
t.Fatalf("unexpected total amount %v", rt.TotalAmount)
}
// Build the route for the minimum amount.
rt, err = ctx.router.BuildRoute(
nil, hops, nil, 40, &payAddr,
)
if err != nil {
t.Fatal(err)
}
// Check that we get the expected route back. The minimum that we can
// send from b to c is 20 sats. Hop b charges 1200 msat for the
// forwarding. The channel between hop a and b can carry amounts in the
// range [5, 100], so 21200 msats is the minimum amount for this route.
checkHops(rt, []uint64{1, 7}, payAddr)
if rt.TotalAmount != 21200 {
t.Fatalf("unexpected total amount %v", rt.TotalAmount)
}
// Test a route that contains incompatible channel htlc constraints.
// There is no amount that can pass through both channel 5 and 4.
hops = []route.Vertex{
ctx.aliases["e"], ctx.aliases["c"],
}
_, err = ctx.router.BuildRoute(
nil, hops, nil, 40, nil,
)
errNoChannel, ok := err.(ErrNoChannel)
if !ok {
t.Fatalf("expected incompatible policies error, but got %v",
err)
}
if errNoChannel.position != 0 {
t.Fatalf("unexpected no channel error position")
}
if errNoChannel.fromNode != ctx.aliases["a"] {
t.Fatalf("unexpected no channel error node")
}
}
Reference in New Issue View Git Blame Copy Permalink