lnd.xprv/contractcourt/htlc_timeout_resolver.go
2019-01-16 20:03:59 +01:00

296 lines
9.2 KiB
Go

package contractcourt
import (
"encoding/binary"
"fmt"
"io"
"github.com/btcsuite/btcd/wire"
"github.com/lightningnetwork/lnd/lnwallet"
"github.com/lightningnetwork/lnd/lnwire"
)
// htlcTimeoutResolver is a ContractResolver that's capable of resolving an
// outgoing HTLC. The HTLC may be on our commitment transaction, or on the
// commitment transaction of the remote party. An output on our commitment
// transaction is considered fully resolved once the second-level transaction
// has been confirmed (and reached a sufficient depth). An output on the
// commitment transaction of the remote party is resolved once we detect a
// spend of the direct HTLC output using the timeout clause.
type htlcTimeoutResolver struct {
// htlcResolution contains all the information required to properly
// resolve this outgoing HTLC.
htlcResolution lnwallet.OutgoingHtlcResolution
// outputIncubating returns true if we've sent the output to the output
// incubator (utxo nursery).
outputIncubating bool
// resolved reflects if the contract has been fully resolved or not.
resolved bool
// broadcastHeight is the height that the original contract was
// broadcast to the main-chain at. We'll use this value to bound any
// historical queries to the chain for spends/confirmations.
//
// TODO(roasbeef): wrap above into definite resolution embedding?
broadcastHeight uint32
// htlcIndex is the index of this HTLC within the trace of the
// additional commitment state machine.
htlcIndex uint64
ResolverKit
}
// ResolverKey returns an identifier which should be globally unique for this
// particular resolver within the chain the original contract resides within.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) ResolverKey() []byte {
// The primary key for this resolver will be the outpoint of the HTLC
// on the commitment transaction itself. If this is our commitment,
// then the output can be found within the signed timeout tx,
// otherwise, it's just the ClaimOutpoint.
var op wire.OutPoint
if h.htlcResolution.SignedTimeoutTx != nil {
op = h.htlcResolution.SignedTimeoutTx.TxIn[0].PreviousOutPoint
} else {
op = h.htlcResolution.ClaimOutpoint
}
key := newResolverID(op)
return key[:]
}
// Resolve kicks off full resolution of an outgoing HTLC output. If it's our
// commitment, it isn't resolved until we see the second level HTLC txn
// confirmed. If it's the remote party's commitment, we don't resolve until we
// see a direct sweep via the timeout clause.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) Resolve() (ContractResolver, error) {
// If we're already resolved, then we can exit early.
if h.resolved {
return nil, nil
}
// If we haven't already sent the output to the utxo nursery, then
// we'll do so now.
if !h.outputIncubating {
log.Tracef("%T(%v): incubating htlc output", h,
h.htlcResolution.ClaimOutpoint)
err := h.IncubateOutputs(
h.ChanPoint, nil, &h.htlcResolution, nil,
h.broadcastHeight,
)
if err != nil {
return nil, err
}
h.outputIncubating = true
if err := h.Checkpoint(h); err != nil {
log.Errorf("unable to Checkpoint: %v", err)
return nil, err
}
}
// waitForOutputResolution waits for the HTLC output to be fully
// resolved. The output is considered fully resolved once it has been
// spent, and the spending transaction has been fully confirmed.
waitForOutputResolution := func() error {
// We first need to register to see when the HTLC output itself
// has been spent by a confirmed transaction.
spendNtfn, err := h.Notifier.RegisterSpendNtfn(
&h.htlcResolution.ClaimOutpoint,
h.htlcResolution.SweepSignDesc.Output.PkScript,
h.broadcastHeight,
)
if err != nil {
return err
}
select {
case _, ok := <-spendNtfn.Spend:
if !ok {
return fmt.Errorf("notifier quit")
}
case <-h.Quit:
return fmt.Errorf("quitting")
}
return nil
}
// With the output sent to the nursery, we'll now wait until the output
// has been fully resolved before sending the clean up message.
//
// TODO(roasbeef): need to be able to cancel nursery?
// * if they pull on-chain while we're waiting
// If we don't have a second layer transaction, then this is a remote
// party's commitment, so we'll watch for a direct spend.
if h.htlcResolution.SignedTimeoutTx == nil {
// We'll block until: the HTLC output has been spent, and the
// transaction spending that output is sufficiently confirmed.
log.Infof("%T(%v): waiting for nursery to spend CLTV-locked "+
"output", h, h.htlcResolution.ClaimOutpoint)
if err := waitForOutputResolution(); err != nil {
return nil, err
}
} else {
// Otherwise, this is our commitment, so we'll watch for the
// second-level transaction to be sufficiently confirmed.
secondLevelTXID := h.htlcResolution.SignedTimeoutTx.TxHash()
sweepScript := h.htlcResolution.SignedTimeoutTx.TxOut[0].PkScript
confNtfn, err := h.Notifier.RegisterConfirmationsNtfn(
&secondLevelTXID, sweepScript, 1, h.broadcastHeight,
)
if err != nil {
return nil, err
}
log.Infof("%T(%v): waiting second-level tx (txid=%v) to be "+
"fully confirmed", h, h.htlcResolution.ClaimOutpoint,
secondLevelTXID)
select {
case _, ok := <-confNtfn.Confirmed:
if !ok {
return nil, fmt.Errorf("quitting")
}
case <-h.Quit:
return nil, fmt.Errorf("quitting")
}
}
// TODO(roasbeef): need to watch for remote party sweeping with pre-image?
// * have another waiting on spend above, will check the type, if it's
// pre-image, then we'll cancel, and send a clean up back with
// pre-image, also add to preimage cache
log.Infof("%T(%v): resolving htlc with incoming fail msg, fully "+
"confirmed", h, h.htlcResolution.ClaimOutpoint)
// At this point, the second-level transaction is sufficiently
// confirmed, or a transaction directly spending the output is.
// Therefore, we can now send back our clean up message.
failureMsg := &lnwire.FailPermanentChannelFailure{}
if err := h.DeliverResolutionMsg(ResolutionMsg{
SourceChan: h.ShortChanID,
HtlcIndex: h.htlcIndex,
Failure: failureMsg,
}); err != nil {
return nil, err
}
// Finally, if this was an output on our commitment transaction, we'll
// for the second-level HTLC output to be spent, and for that
// transaction itself to confirm.
if h.htlcResolution.SignedTimeoutTx != nil {
log.Infof("%T(%v): waiting for nursery to spend CSV delayed "+
"output", h, h.htlcResolution.ClaimOutpoint)
if err := waitForOutputResolution(); err != nil {
return nil, err
}
}
// With the clean up message sent, we'll now mark the contract
// resolved, and wait.
h.resolved = true
return nil, h.Checkpoint(h)
}
// Stop signals the resolver to cancel any current resolution processes, and
// suspend.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) Stop() {
close(h.Quit)
}
// IsResolved returns true if the stored state in the resolve is fully
// resolved. In this case the target output can be forgotten.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) IsResolved() bool {
return h.resolved
}
// Encode writes an encoded version of the ContractResolver into the passed
// Writer.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) Encode(w io.Writer) error {
// First, we'll write out the relevant fields of the
// OutgoingHtlcResolution to the writer.
if err := encodeOutgoingResolution(w, &h.htlcResolution); err != nil {
return err
}
// With that portion written, we can now write out the fields specific
// to the resolver itself.
if err := binary.Write(w, endian, h.outputIncubating); err != nil {
return err
}
if err := binary.Write(w, endian, h.resolved); err != nil {
return err
}
if err := binary.Write(w, endian, h.broadcastHeight); err != nil {
return err
}
if err := binary.Write(w, endian, h.htlcIndex); err != nil {
return err
}
return nil
}
// Decode attempts to decode an encoded ContractResolver from the passed Reader
// instance, returning an active ContractResolver instance.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) Decode(r io.Reader) error {
// First, we'll read out all the mandatory fields of the
// OutgoingHtlcResolution that we store.
if err := decodeOutgoingResolution(r, &h.htlcResolution); err != nil {
return err
}
// With those fields read, we can now read back the fields that are
// specific to the resolver itself.
if err := binary.Read(r, endian, &h.outputIncubating); err != nil {
return err
}
if err := binary.Read(r, endian, &h.resolved); err != nil {
return err
}
if err := binary.Read(r, endian, &h.broadcastHeight); err != nil {
return err
}
if err := binary.Read(r, endian, &h.htlcIndex); err != nil {
return err
}
return nil
}
// AttachResolverKit should be called once a resolved is successfully decoded
// from its stored format. This struct delivers a generic tool kit that
// resolvers need to complete their duty.
//
// NOTE: Part of the ContractResolver interface.
func (h *htlcTimeoutResolver) AttachResolverKit(r ResolverKit) {
h.ResolverKit = r
}
// A compile time assertion to ensure htlcTimeoutResolver meets the
// ContractResolver interface.
var _ ContractResolver = (*htlcTimeoutResolver)(nil)