lnd.xprv/docker
2017-01-17 16:56:28 -08:00
..
btcd docker: general improvements 2017-01-17 16:56:28 -08:00
lnd docker: general improvements 2017-01-17 16:56:28 -08:00
docker-compose.yml docker: make blockchain persistant 2017-01-17 16:56:28 -08:00
README.md docker: add example output to commands in workflow 2017-01-12 17:13:18 -08:00

Getting started

This document is written for people who are eager to do something with the Lightning Network Daemon (lnd). This folder uses docker-compose to package lnd and btcd together to make deploying the two daemons as easy as typing a few commands. All configuration between lnd and btcd are handled automatically by their docker-compose config file.

This document describes a workflow on simnet, a development/test network that's similar to Bitcoin Core's regtest mode. In simnet mode blocks can be generated as will, as the difficulty is very low. This makes it an ideal environment for testing as one doesn't need to wait tens of minutes for blocks to arrive in order to test channel related functionality. Additionally, it's possible to spin up an arbitrary number of lnd instances within containers to create a mini development cluster. All state is saved between instances using a shared value.

Current workflow is big because we recreate the whole network by ourselves, next versions will use the started btcd bitcoin node in testnet and faucet wallet from which you will get the bitcoins.

In the workflow below, we describe the steps required to recreate following topology, and send a payment from Alice to Bob.

+ ----- +                   + --- +
| Alice | <--- channel ---> | Bob |  <---   Bob and Alice are the lightning network daemons which 
+ ----- +                   + --- +         creates the channel and interact with each other using   
    |                          |            Bitcoin network as source of truth. 
    |                          |            
    + - - - -  - + - - - - - - +            
                 |
        + ---------------- +
        | Bitcoin network  |  <---  In current scenario for simplicity we create only one  
        + ---------------- +        "btcd" node which represents the Bitcoin network, in  
                                    real situation Alice and Bob will likely be 
                                    connected to different Bitcoin nodes.

Prerequisites

Name  | Version 

--------|--------- docker-compose | 1.9.0 docker | 1.13.0

General workflow is following:

  • Create a btcd node running on a private simnet.
  • Create Alice, one of the lnd nodes in our test network.
  • Create Bob, the other lnd node in our test network.
  • Mine some blocks to send Alice some bitcoin.
  • Open channel between Alice and Bob.
  • Send payment from Alice to Bob.
  • Finally, close the channel between Alice and Bob`.

Start btcd, and then create an address for Alice that we'll directly mine bitcoin into.

# Create "btcd" node:
$ docker-compose up -d "btcd"

# Run the "Alice" container and log into it:
$ docker-compose up -d "alice"
$ docker exec -i -t "alice" bash

# Generate a new backward compatible nested p2sh for from Alice:
alice$ lncli newaddress np2wkh 

# Recreate "btcd" node and set Alice's address as mining address:
$ MINING_ADDRESS=<alice_address> docker-compose up -d "btcd"

# Generate 201 block (we need at least "100 >=" blocks because of coinbase 
# block maturity and "250 >=" in order to activate segwit):
$ docker-compose run btcctl generate 250

# Check that segwit is active:
$ docker-compose run btcctl getblockchaininfo | grep -A 1 segwit

Now we have btcd running and some amount of bitcoins mined to the Alice address. We'll need to restart Alice just once so she properly syncs up with btcd.

# Stop "Alice" container:
$ docker-compose stop "alice"

# Start "Alice" container and log into it:
$ docker-compose up --no-recreate -d "alice"
$ docker exec -i -t "alice" bash

# Check "Alice" balance:
alice$ lncli walletbalance --witness_only=true

Connect Bob node to Alice node.

# Run "Bob" node and log into it:
$ docker-compose up --no-recreate -d "bob"
$ docker exec -i -t "bob" bash

# Get the identity pubkey of "Bob" node:
bob$ lncli getinfo

{
  ----> "identity_pubkey": "0290bf454f4b95baf9227801301b331e35d477c6b6e7f36a599983ae58747b3828",
	"block_height": 3949,
	"block_hash": "00000000853c9dcccf8879abb0a91f0152aed16efe68015a924156f5845016ee",
	"synced_to_chain": true,
	"testnet": false,
}

# Get the IP address of "Bob" node:
$ docker inspect "bob" | grep IPAddress

# Connect "Alice" to the "Bob" node:
alice$ lncli connect <bob_pubkey>@<bob_host>:10011

# Check list of peers on "Alice" side:
alice$ lncli listpeers
{
	"peers": [
		{
			"pub_key": "0290bf454f4b95baf9227801301b331e35d477c6b6e7f36a599983ae58747b3828",
			"peer_id": 1,
			"address": "10.0.0.125:10011",
			"bytes_sent": 3278,
			"bytes_recv": 3278
		}
	]
}

# Check list of peers on "Bob" side:
bob$ lncli listpeers
{
	"peers": [
		{
			"pub_key": "036a0c5ea35df8a528b98edf6f290b28676d51d0fe202b073fe677612a39c0aa09",
			"peer_id": 1,
			"address": "10.0.0.15:10011",
			"bytes_sent": 3278,
			"bytes_recv": 3278
		}
	]
}

Create the Alice<->Bob channel.

# Open the channel with "Bob":
alice$ lncli openchannel --node_key=<bob_lightning_id> --num_confs=1 --local_amt=1000000

# Include funding transaction in block thereby open the channel:
$ docker-compose run btcctl generate 1

# Check that channel with "Bob" was created:
alice$ lncli listchannels
{
	"channels": [
		{
			"remote_pubkey": "0290bf454f4b95baf9227801301b331e35d477c6b6e7f36a599983ae58747b3828",
			"channel_point": "7a632cde9e9e2ae4e9209591c0587bbb03254814c62e2a7fcef35ced743b0025:0",
			"chan_id": 1170330072213225472,
			"capacity": 1005000,
			"local_balance": 1000000,
		}
	]
}

Send the payment form "Alice" to "Bob".

# Add invoice on "Bob" side:
bob> lncli addinvoice --value=10000
{
        "r_hash": "<your_random_rhash_here>", 
        "pay_req": "<encoded_invoice>", 
}

# Send payment from "Alice" to "Bob":
alice> lncli sendpayment --pay_req=<encoded_invoice>

# Check "Alice"'s channel balance was decremented accordingly by the payment
# amount
alice> lncli listchannels

# Check "Bob"'s channel balance was credited with the payment amount
bob> lncli listchannels

Now we have open channel in which we sent only one payment, lets imagine that we sent a lots of them and we'll now like to close the channel. Lets do it!

# List the "Alice" channel and retrieve "channel_point" which represent
# the opened channel:
alice> lncli listchannels
{
	"channels": [
		{
			"remote_pubkey": "0290bf454f4b95baf9227801301b331e35d477c6b6e7f36a599983ae58747b3828",
			"channel_point": "7a632cde9e9e2ae4e9209591c0587bbb03254814c62e2a7fcef35ced743b0025:0",
			"chan_id": 1170330072213225472,
			"capacity": 1005000,
			"local_balance": 900000,
                        "remote_balance": 10000, 
		}
	]
}

# Channel point consist of two numbers separated by colon the first on is
# "funding_txid" and the second one is "output_index":
alice> lncli closechannel --funding_txid=<funding_txid> --output_index=<output_index>

# Include close transaction in block thereby close the channel:
$ docker-compose run btcctl generate 1

# Check "Alice" on-chain balance was credited by her settled amount in the channel:
alice> lncli walletbalance

# Check "Bob" on-chain balance was credited with the funds he received in the
# channel:
bob> lncli walletbalance

Questions

  • How to see alice | bob | btcd logs?
docker-compose logs <alice|bob|btcd>