lnd.xprv/invoices/invoiceregistry.go
Olaoluwa Osuntokun 47403c0be4
Merge pull request #5226 from yyforyongyu/small-fix-invoice
invoices: remove unused param in notifyClients
2021-05-19 16:36:06 -07:00

1657 lines
49 KiB
Go

package invoices
import (
"errors"
"fmt"
"sync"
"sync/atomic"
"time"
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/clock"
"github.com/lightningnetwork/lnd/lntypes"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/lightningnetwork/lnd/queue"
"github.com/lightningnetwork/lnd/record"
)
var (
// ErrInvoiceExpiryTooSoon is returned when an invoice is attempted to be
// accepted or settled with not enough blocks remaining.
ErrInvoiceExpiryTooSoon = errors.New("invoice expiry too soon")
// ErrInvoiceAmountTooLow is returned when an invoice is attempted to be
// accepted or settled with an amount that is too low.
ErrInvoiceAmountTooLow = errors.New("paid amount less than invoice amount")
// ErrShuttingDown is returned when an operation failed because the
// invoice registry is shutting down.
ErrShuttingDown = errors.New("invoice registry shutting down")
)
const (
// DefaultHtlcHoldDuration defines the default for how long mpp htlcs
// are held while waiting for the other set members to arrive.
DefaultHtlcHoldDuration = 120 * time.Second
)
// RegistryConfig contains the configuration parameters for invoice registry.
type RegistryConfig struct {
// FinalCltvRejectDelta defines the number of blocks before the expiry
// of the htlc where we no longer settle it as an exit hop and instead
// cancel it back. Normally this value should be lower than the cltv
// expiry of any invoice we create and the code effectuating this should
// not be hit.
FinalCltvRejectDelta int32
// HtlcHoldDuration defines for how long mpp htlcs are held while
// waiting for the other set members to arrive.
HtlcHoldDuration time.Duration
// Clock holds the clock implementation that is used to provide
// Now() and TickAfter() and is useful to stub out the clock functions
// during testing.
Clock clock.Clock
// AcceptKeySend indicates whether we want to accept spontaneous key
// send payments.
AcceptKeySend bool
// AcceptAMP indicates whether we want to accept spontaneous AMP
// payments.
AcceptAMP bool
// GcCanceledInvoicesOnStartup if set, we'll attempt to garbage collect
// all canceled invoices upon start.
GcCanceledInvoicesOnStartup bool
// GcCanceledInvoicesOnTheFly if set, we'll garbage collect all newly
// canceled invoices on the fly.
GcCanceledInvoicesOnTheFly bool
// KeysendHoldTime indicates for how long we want to accept and hold
// spontaneous keysend payments.
KeysendHoldTime time.Duration
}
// htlcReleaseEvent describes an htlc auto-release event. It is used to release
// mpp htlcs for which the complete set didn't arrive in time.
type htlcReleaseEvent struct {
// invoiceRef identifiers the invoice this htlc belongs to.
invoiceRef channeldb.InvoiceRef
// key is the circuit key of the htlc to release.
key channeldb.CircuitKey
// releaseTime is the time at which to release the htlc.
releaseTime time.Time
}
// Less is used to order PriorityQueueItem's by their release time such that
// items with the older release time are at the top of the queue.
//
// NOTE: Part of the queue.PriorityQueueItem interface.
func (r *htlcReleaseEvent) Less(other queue.PriorityQueueItem) bool {
return r.releaseTime.Before(other.(*htlcReleaseEvent).releaseTime)
}
// InvoiceRegistry is a central registry of all the outstanding invoices
// created by the daemon. The registry is a thin wrapper around a map in order
// to ensure that all updates/reads are thread safe.
type InvoiceRegistry struct {
sync.RWMutex
cdb *channeldb.DB
// cfg contains the registry's configuration parameters.
cfg *RegistryConfig
clientMtx sync.Mutex
nextClientID uint32
notificationClients map[uint32]*InvoiceSubscription
singleNotificationClients map[uint32]*SingleInvoiceSubscription
newSubscriptions chan *InvoiceSubscription
subscriptionCancels chan uint32
// invoiceEvents is a single channel over which both invoice updates and
// new single invoice subscriptions are carried.
invoiceEvents chan interface{}
// subscriptions is a map from a circuit key to a list of subscribers.
// It is used for efficient notification of links.
hodlSubscriptions map[channeldb.CircuitKey]map[chan<- interface{}]struct{}
// reverseSubscriptions tracks circuit keys subscribed to per
// subscriber. This is used to unsubscribe from all hashes efficiently.
hodlReverseSubscriptions map[chan<- interface{}]map[channeldb.CircuitKey]struct{}
// htlcAutoReleaseChan contains the new htlcs that need to be
// auto-released.
htlcAutoReleaseChan chan *htlcReleaseEvent
expiryWatcher *InvoiceExpiryWatcher
wg sync.WaitGroup
quit chan struct{}
}
// NewRegistry creates a new invoice registry. The invoice registry
// wraps the persistent on-disk invoice storage with an additional in-memory
// layer. The in-memory layer is in place such that debug invoices can be added
// which are volatile yet available system wide within the daemon.
func NewRegistry(cdb *channeldb.DB, expiryWatcher *InvoiceExpiryWatcher,
cfg *RegistryConfig) *InvoiceRegistry {
return &InvoiceRegistry{
cdb: cdb,
notificationClients: make(map[uint32]*InvoiceSubscription),
singleNotificationClients: make(map[uint32]*SingleInvoiceSubscription),
newSubscriptions: make(chan *InvoiceSubscription),
subscriptionCancels: make(chan uint32),
invoiceEvents: make(chan interface{}, 100),
hodlSubscriptions: make(map[channeldb.CircuitKey]map[chan<- interface{}]struct{}),
hodlReverseSubscriptions: make(map[chan<- interface{}]map[channeldb.CircuitKey]struct{}),
cfg: cfg,
htlcAutoReleaseChan: make(chan *htlcReleaseEvent),
expiryWatcher: expiryWatcher,
quit: make(chan struct{}),
}
}
// scanInvoicesOnStart will scan all invoices on start and add active invoices
// to the invoice expirt watcher while also attempting to delete all canceled
// invoices.
func (i *InvoiceRegistry) scanInvoicesOnStart() error {
var (
pending []invoiceExpiry
removable []channeldb.InvoiceDeleteRef
)
reset := func() {
// Zero out our results on start and if the scan is ever run
// more than once. This latter case can happen if the kvdb
// layer needs to retry the View transaction underneath (eg.
// using the etcd driver, where all transactions are allowed
// to retry for serializability).
pending = nil
removable = make([]channeldb.InvoiceDeleteRef, 0)
}
scanFunc := func(
paymentHash lntypes.Hash, invoice *channeldb.Invoice) error {
if invoice.IsPending() {
expiryRef := makeInvoiceExpiry(paymentHash, invoice)
if expiryRef != nil {
pending = append(pending, expiryRef)
}
} else if i.cfg.GcCanceledInvoicesOnStartup &&
invoice.State == channeldb.ContractCanceled {
// Consider invoice for removal if it is already
// canceled. Invoices that are expired but not yet
// canceled, will be queued up for cancellation after
// startup and will be deleted afterwards.
ref := channeldb.InvoiceDeleteRef{
PayHash: paymentHash,
AddIndex: invoice.AddIndex,
SettleIndex: invoice.SettleIndex,
}
if invoice.Terms.PaymentAddr != channeldb.BlankPayAddr {
ref.PayAddr = &invoice.Terms.PaymentAddr
}
removable = append(removable, ref)
}
return nil
}
err := i.cdb.ScanInvoices(scanFunc, reset)
if err != nil {
return err
}
log.Debugf("Adding %d pending invoices to the expiry watcher",
len(pending))
i.expiryWatcher.AddInvoices(pending...)
if len(removable) > 0 {
log.Infof("Attempting to delete %v canceled invoices",
len(removable))
if err := i.cdb.DeleteInvoice(removable); err != nil {
log.Warnf("Deleting canceled invoices failed: %v", err)
} else {
log.Infof("Deleted %v canceled invoices",
len(removable))
}
}
return nil
}
// Start starts the registry and all goroutines it needs to carry out its task.
func (i *InvoiceRegistry) Start() error {
// Start InvoiceExpiryWatcher and prepopulate it with existing active
// invoices.
err := i.expiryWatcher.Start(i.cancelInvoiceImpl)
if err != nil {
return err
}
i.wg.Add(1)
go i.invoiceEventLoop()
// Now scan all pending and removable invoices to the expiry watcher or
// delete them.
err = i.scanInvoicesOnStart()
if err != nil {
_ = i.Stop()
return err
}
return nil
}
// Stop signals the registry for a graceful shutdown.
func (i *InvoiceRegistry) Stop() error {
i.expiryWatcher.Stop()
close(i.quit)
i.wg.Wait()
return nil
}
// invoiceEvent represents a new event that has modified on invoice on disk.
// Only two event types are currently supported: newly created invoices, and
// instance where invoices are settled.
type invoiceEvent struct {
hash lntypes.Hash
invoice *channeldb.Invoice
}
// tickAt returns a channel that ticks at the specified time. If the time has
// already passed, it will tick immediately.
func (i *InvoiceRegistry) tickAt(t time.Time) <-chan time.Time {
now := i.cfg.Clock.Now()
return i.cfg.Clock.TickAfter(t.Sub(now))
}
// invoiceEventLoop is the dedicated goroutine responsible for accepting
// new notification subscriptions, cancelling old subscriptions, and
// dispatching new invoice events.
func (i *InvoiceRegistry) invoiceEventLoop() {
defer i.wg.Done()
// Set up a heap for htlc auto-releases.
autoReleaseHeap := &queue.PriorityQueue{}
for {
// If there is something to release, set up a release tick
// channel.
var nextReleaseTick <-chan time.Time
if autoReleaseHeap.Len() > 0 {
head := autoReleaseHeap.Top().(*htlcReleaseEvent)
nextReleaseTick = i.tickAt(head.releaseTime)
}
select {
// A new invoice subscription for all invoices has just arrived!
// We'll query for any backlog notifications, then add it to the
// set of clients.
case newClient := <-i.newSubscriptions:
log.Infof("New invoice subscription "+
"client: id=%v", newClient.id)
// With the backlog notifications delivered (if any),
// we'll add this to our active subscriptions and
// continue.
i.notificationClients[newClient.id] = newClient
// A client no longer wishes to receive invoice notifications.
// So we'll remove them from the set of active clients.
case clientID := <-i.subscriptionCancels:
log.Infof("Cancelling invoice subscription for "+
"client=%v", clientID)
delete(i.notificationClients, clientID)
delete(i.singleNotificationClients, clientID)
// An invoice event has come in. This can either be an update to
// an invoice or a new single invoice subscriber. Both type of
// events are passed in via the same channel, to make sure that
// subscribers get a consistent view of the event sequence.
case event := <-i.invoiceEvents:
switch e := event.(type) {
// A sub-systems has just modified the invoice state, so
// we'll dispatch notifications to all registered
// clients.
case *invoiceEvent:
// For backwards compatibility, do not notify
// all invoice subscribers of cancel and accept
// events.
state := e.invoice.State
if state != channeldb.ContractCanceled &&
state != channeldb.ContractAccepted {
i.dispatchToClients(e)
}
i.dispatchToSingleClients(e)
// A new single invoice subscription has arrived. Add it
// to the set of clients. It is important to do this in
// sequence with any other invoice events, because an
// initial invoice update has already been sent out to
// the subscriber.
case *SingleInvoiceSubscription:
log.Infof("New single invoice subscription "+
"client: id=%v, ref=%v", e.id,
e.invoiceRef)
i.singleNotificationClients[e.id] = e
}
// A new htlc came in for auto-release.
case event := <-i.htlcAutoReleaseChan:
log.Debugf("Scheduling auto-release for htlc: "+
"ref=%v, key=%v at %v",
event.invoiceRef, event.key, event.releaseTime)
// We use an independent timer for every htlc rather
// than a set timer that is reset with every htlc coming
// in. Otherwise the sender could keep resetting the
// timer until the broadcast window is entered and our
// channel is force closed.
autoReleaseHeap.Push(event)
// The htlc at the top of the heap needs to be auto-released.
case <-nextReleaseTick:
event := autoReleaseHeap.Pop().(*htlcReleaseEvent)
err := i.cancelSingleHtlc(
event.invoiceRef, event.key, ResultMppTimeout,
)
if err != nil {
log.Errorf("HTLC timer: %v", err)
}
case <-i.quit:
return
}
}
}
// dispatchToSingleClients passes the supplied event to all notification clients
// that subscribed to all the invoice this event applies to.
func (i *InvoiceRegistry) dispatchToSingleClients(event *invoiceEvent) {
// Dispatch to single invoice subscribers.
for _, client := range i.singleNotificationClients {
payHash := client.invoiceRef.PayHash()
if payHash == nil || *payHash != event.hash {
continue
}
client.notify(event)
}
}
// dispatchToClients passes the supplied event to all notification clients that
// subscribed to all invoices. Add and settle indices are used to make sure that
// clients don't receive duplicate or unwanted events.
func (i *InvoiceRegistry) dispatchToClients(event *invoiceEvent) {
invoice := event.invoice
for clientID, client := range i.notificationClients {
// Before we dispatch this event, we'll check
// to ensure that this client hasn't already
// received this notification in order to
// ensure we don't duplicate any events.
// TODO(joostjager): Refactor switches.
state := event.invoice.State
switch {
// If we've already sent this settle event to
// the client, then we can skip this.
case state == channeldb.ContractSettled &&
client.settleIndex >= invoice.SettleIndex:
continue
// Similarly, if we've already sent this add to
// the client then we can skip this one.
case state == channeldb.ContractOpen &&
client.addIndex >= invoice.AddIndex:
continue
// These two states should never happen, but we
// log them just in case so we can detect this
// instance.
case state == channeldb.ContractOpen &&
client.addIndex+1 != invoice.AddIndex:
log.Warnf("client=%v for invoice "+
"notifications missed an update, "+
"add_index=%v, new add event index=%v",
clientID, client.addIndex,
invoice.AddIndex)
case state == channeldb.ContractSettled &&
client.settleIndex+1 != invoice.SettleIndex:
log.Warnf("client=%v for invoice "+
"notifications missed an update, "+
"settle_index=%v, new settle event index=%v",
clientID, client.settleIndex,
invoice.SettleIndex)
}
select {
case client.ntfnQueue.ChanIn() <- &invoiceEvent{
invoice: invoice,
}:
case <-i.quit:
return
}
// Each time we send a notification to a client, we'll record
// the latest add/settle index it has. We'll use this to ensure
// we don't send a notification twice, which can happen if a new
// event is added while we're catching up a new client.
switch event.invoice.State {
case channeldb.ContractSettled:
client.settleIndex = invoice.SettleIndex
case channeldb.ContractOpen:
client.addIndex = invoice.AddIndex
default:
log.Errorf("unexpected invoice state: %v",
event.invoice.State)
}
}
}
// deliverBacklogEvents will attempts to query the invoice database for any
// notifications that the client has missed since it reconnected last.
func (i *InvoiceRegistry) deliverBacklogEvents(client *InvoiceSubscription) error {
addEvents, err := i.cdb.InvoicesAddedSince(client.addIndex)
if err != nil {
return err
}
settleEvents, err := i.cdb.InvoicesSettledSince(client.settleIndex)
if err != nil {
return err
}
// If we have any to deliver, then we'll append them to the end of the
// notification queue in order to catch up the client before delivering
// any new notifications.
for _, addEvent := range addEvents {
// We re-bind the loop variable to ensure we don't hold onto
// the loop reference causing is to point to the same item.
addEvent := addEvent
select {
case client.ntfnQueue.ChanIn() <- &invoiceEvent{
invoice: &addEvent,
}:
case <-i.quit:
return ErrShuttingDown
}
}
for _, settleEvent := range settleEvents {
// We re-bind the loop variable to ensure we don't hold onto
// the loop reference causing is to point to the same item.
settleEvent := settleEvent
select {
case client.ntfnQueue.ChanIn() <- &invoiceEvent{
invoice: &settleEvent,
}:
case <-i.quit:
return ErrShuttingDown
}
}
return nil
}
// deliverSingleBacklogEvents will attempt to query the invoice database to
// retrieve the current invoice state and deliver this to the subscriber. Single
// invoice subscribers will always receive the current state right after
// subscribing. Only in case the invoice does not yet exist, nothing is sent
// yet.
func (i *InvoiceRegistry) deliverSingleBacklogEvents(
client *SingleInvoiceSubscription) error {
invoice, err := i.cdb.LookupInvoice(client.invoiceRef)
// It is possible that the invoice does not exist yet, but the client is
// already watching it in anticipation.
if err == channeldb.ErrInvoiceNotFound ||
err == channeldb.ErrNoInvoicesCreated {
return nil
}
if err != nil {
return err
}
payHash := client.invoiceRef.PayHash()
if payHash == nil {
return nil
}
err = client.notify(&invoiceEvent{
hash: *payHash,
invoice: &invoice,
})
if err != nil {
return err
}
return nil
}
// AddInvoice adds a regular invoice for the specified amount, identified by
// the passed preimage. Additionally, any memo or receipt data provided will
// also be stored on-disk. Once this invoice is added, subsystems within the
// daemon add/forward HTLCs are able to obtain the proper preimage required for
// redemption in the case that we're the final destination. We also return the
// addIndex of the newly created invoice which monotonically increases for each
// new invoice added. A side effect of this function is that it also sets
// AddIndex on the invoice argument.
func (i *InvoiceRegistry) AddInvoice(invoice *channeldb.Invoice,
paymentHash lntypes.Hash) (uint64, error) {
i.Lock()
ref := channeldb.InvoiceRefByHash(paymentHash)
log.Debugf("Invoice%v: added with terms %v", ref, invoice.Terms)
addIndex, err := i.cdb.AddInvoice(invoice, paymentHash)
if err != nil {
i.Unlock()
return 0, err
}
// Now that we've added the invoice, we'll send dispatch a message to
// notify the clients of this new invoice.
i.notifyClients(paymentHash, invoice)
i.Unlock()
// InvoiceExpiryWatcher.AddInvoice must not be locked by InvoiceRegistry
// to avoid deadlock when a new invoice is added while an other is being
// canceled.
invoiceExpiryRef := makeInvoiceExpiry(paymentHash, invoice)
if invoiceExpiryRef != nil {
i.expiryWatcher.AddInvoices(invoiceExpiryRef)
}
return addIndex, nil
}
// LookupInvoice looks up an invoice by its payment hash (R-Hash), if found
// then we're able to pull the funds pending within an HTLC.
//
// TODO(roasbeef): ignore if settled?
func (i *InvoiceRegistry) LookupInvoice(rHash lntypes.Hash) (channeldb.Invoice,
error) {
// We'll check the database to see if there's an existing matching
// invoice.
ref := channeldb.InvoiceRefByHash(rHash)
return i.cdb.LookupInvoice(ref)
}
// startHtlcTimer starts a new timer via the invoice registry main loop that
// cancels a single htlc on an invoice when the htlc hold duration has passed.
func (i *InvoiceRegistry) startHtlcTimer(invoiceRef channeldb.InvoiceRef,
key channeldb.CircuitKey, acceptTime time.Time) error {
releaseTime := acceptTime.Add(i.cfg.HtlcHoldDuration)
event := &htlcReleaseEvent{
invoiceRef: invoiceRef,
key: key,
releaseTime: releaseTime,
}
select {
case i.htlcAutoReleaseChan <- event:
return nil
case <-i.quit:
return ErrShuttingDown
}
}
// cancelSingleHtlc cancels a single accepted htlc on an invoice. It takes
// a resolution result which will be used to notify subscribed links and
// resolvers of the details of the htlc cancellation.
func (i *InvoiceRegistry) cancelSingleHtlc(invoiceRef channeldb.InvoiceRef,
key channeldb.CircuitKey, result FailResolutionResult) error {
i.Lock()
defer i.Unlock()
updateInvoice := func(invoice *channeldb.Invoice) (
*channeldb.InvoiceUpdateDesc, error) {
// Only allow individual htlc cancelation on open invoices.
if invoice.State != channeldb.ContractOpen {
log.Debugf("cancelSingleHtlc: invoice %v no longer "+
"open", invoiceRef)
return nil, nil
}
// Lookup the current status of the htlc in the database.
htlc, ok := invoice.Htlcs[key]
if !ok {
return nil, fmt.Errorf("htlc %v not found", key)
}
// Cancelation is only possible if the htlc wasn't already
// resolved.
if htlc.State != channeldb.HtlcStateAccepted {
log.Debugf("cancelSingleHtlc: htlc %v on invoice %v "+
"is already resolved", key, invoiceRef)
return nil, nil
}
log.Debugf("cancelSingleHtlc: cancelling htlc %v on invoice %v",
key, invoiceRef)
// Return an update descriptor that cancels htlc and keeps
// invoice open.
canceledHtlcs := map[channeldb.CircuitKey]struct{}{
key: {},
}
return &channeldb.InvoiceUpdateDesc{
CancelHtlcs: canceledHtlcs,
}, nil
}
// Try to mark the specified htlc as canceled in the invoice database.
// Intercept the update descriptor to set the local updated variable. If
// no invoice update is performed, we can return early.
var updated bool
invoice, err := i.cdb.UpdateInvoice(invoiceRef,
func(invoice *channeldb.Invoice) (
*channeldb.InvoiceUpdateDesc, error) {
updateDesc, err := updateInvoice(invoice)
if err != nil {
return nil, err
}
updated = updateDesc != nil
return updateDesc, err
},
)
if err != nil {
return err
}
if !updated {
return nil
}
// The invoice has been updated. Notify subscribers of the htlc
// resolution.
htlc, ok := invoice.Htlcs[key]
if !ok {
return fmt.Errorf("htlc %v not found", key)
}
if htlc.State == channeldb.HtlcStateCanceled {
resolution := NewFailResolution(
key, int32(htlc.AcceptHeight), result,
)
i.notifyHodlSubscribers(resolution)
}
return nil
}
// processKeySend just-in-time inserts an invoice if this htlc is a keysend
// htlc.
func (i *InvoiceRegistry) processKeySend(ctx invoiceUpdateCtx) error {
// Retrieve keysend record if present.
preimageSlice, ok := ctx.customRecords[record.KeySendType]
if !ok {
return nil
}
// Cancel htlc is preimage is invalid.
preimage, err := lntypes.MakePreimage(preimageSlice)
if err != nil {
return err
}
if preimage.Hash() != ctx.hash {
return fmt.Errorf("invalid keysend preimage %v for hash %v",
preimage, ctx.hash)
}
// Only allow keysend for non-mpp payments.
if ctx.mpp != nil {
return errors.New("no mpp keysend supported")
}
// Create an invoice for the htlc amount.
amt := ctx.amtPaid
// Set tlv optional feature vector on the invoice. Otherwise we wouldn't
// be able to pay to it with keysend.
rawFeatures := lnwire.NewRawFeatureVector(
lnwire.TLVOnionPayloadOptional,
)
features := lnwire.NewFeatureVector(rawFeatures, lnwire.Features)
// Use the minimum block delta that we require for settling htlcs.
finalCltvDelta := i.cfg.FinalCltvRejectDelta
// Pre-check expiry here to prevent inserting an invoice that will not
// be settled.
if ctx.expiry < uint32(ctx.currentHeight+finalCltvDelta) {
return errors.New("final expiry too soon")
}
// The invoice database indexes all invoices by payment address, however
// legacy keysend payment do not have one. In order to avoid a new
// payment type on-disk wrt. to indexing, we'll continue to insert a
// blank payment address which is special cased in the insertion logic
// to not be indexed. In the future, once AMP is merged, this should be
// replaced by generating a random payment address on the behalf of the
// sender.
payAddr := channeldb.BlankPayAddr
// Create placeholder invoice.
invoice := &channeldb.Invoice{
CreationDate: i.cfg.Clock.Now(),
Terms: channeldb.ContractTerm{
FinalCltvDelta: finalCltvDelta,
Value: amt,
PaymentPreimage: &preimage,
PaymentAddr: payAddr,
Features: features,
},
}
if i.cfg.KeysendHoldTime != 0 {
invoice.HodlInvoice = true
invoice.Terms.Expiry = i.cfg.KeysendHoldTime
}
// Insert invoice into database. Ignore duplicates, because this
// may be a replay.
_, err = i.AddInvoice(invoice, ctx.hash)
if err != nil && err != channeldb.ErrDuplicateInvoice {
return err
}
return nil
}
// processAMP just-in-time inserts an invoice if this htlc is a keysend
// htlc.
func (i *InvoiceRegistry) processAMP(ctx invoiceUpdateCtx) error {
// AMP payments MUST also include an MPP record.
if ctx.mpp == nil {
return errors.New("no MPP record for AMP")
}
// Create an invoice for the total amount expected, provided in the MPP
// record.
amt := ctx.mpp.TotalMsat()
// Set the TLV and MPP optional features on the invoice. We'll also make
// the AMP features required so that it can't be paid by legacy or MPP
// htlcs.
rawFeatures := lnwire.NewRawFeatureVector(
lnwire.TLVOnionPayloadOptional,
lnwire.PaymentAddrOptional,
lnwire.AMPRequired,
)
features := lnwire.NewFeatureVector(rawFeatures, lnwire.Features)
// Use the minimum block delta that we require for settling htlcs.
finalCltvDelta := i.cfg.FinalCltvRejectDelta
// Pre-check expiry here to prevent inserting an invoice that will not
// be settled.
if ctx.expiry < uint32(ctx.currentHeight+finalCltvDelta) {
return errors.New("final expiry too soon")
}
// We'll use the sender-generated payment address provided in the HTLC
// to create our AMP invoice.
payAddr := ctx.mpp.PaymentAddr()
// Create placeholder invoice.
invoice := &channeldb.Invoice{
CreationDate: i.cfg.Clock.Now(),
Terms: channeldb.ContractTerm{
FinalCltvDelta: finalCltvDelta,
Value: amt,
PaymentPreimage: nil,
PaymentAddr: payAddr,
Features: features,
},
}
// Insert invoice into database. Ignore duplicates payment hashes and
// payment addrs, this may be a replay or a different HTLC for the AMP
// invoice.
_, err := i.AddInvoice(invoice, ctx.hash)
switch {
case err == channeldb.ErrDuplicateInvoice:
return nil
case err == channeldb.ErrDuplicatePayAddr:
return nil
default:
return err
}
}
// NotifyExitHopHtlc attempts to mark an invoice as settled. The return value
// describes how the htlc should be resolved.
//
// When the preimage of the invoice is not yet known (hodl invoice), this
// function moves the invoice to the accepted state. When SettleHoldInvoice is
// called later, a resolution message will be send back to the caller via the
// provided hodlChan. Invoice registry sends on this channel what action needs
// to be taken on the htlc (settle or cancel). The caller needs to ensure that
// the channel is either buffered or received on from another goroutine to
// prevent deadlock.
//
// In the case that the htlc is part of a larger set of htlcs that pay to the
// same invoice (multi-path payment), the htlc is held until the set is
// complete. If the set doesn't fully arrive in time, a timer will cancel the
// held htlc.
func (i *InvoiceRegistry) NotifyExitHopHtlc(rHash lntypes.Hash,
amtPaid lnwire.MilliSatoshi, expiry uint32, currentHeight int32,
circuitKey channeldb.CircuitKey, hodlChan chan<- interface{},
payload Payload) (HtlcResolution, error) {
// Create the update context containing the relevant details of the
// incoming htlc.
ctx := invoiceUpdateCtx{
hash: rHash,
circuitKey: circuitKey,
amtPaid: amtPaid,
expiry: expiry,
currentHeight: currentHeight,
finalCltvRejectDelta: i.cfg.FinalCltvRejectDelta,
customRecords: payload.CustomRecords(),
mpp: payload.MultiPath(),
amp: payload.AMPRecord(),
}
switch {
// If we are accepting spontaneous AMP payments and this payload
// contains an AMP record, create an AMP invoice that will be settled
// below.
case i.cfg.AcceptAMP && ctx.amp != nil:
err := i.processAMP(ctx)
if err != nil {
ctx.log(fmt.Sprintf("amp error: %v", err))
return NewFailResolution(
circuitKey, currentHeight, ResultAmpError,
), nil
}
// If we are accepting spontaneous keysend payments, create a regular
// invoice that will be settled below. We also enforce that this is only
// done when no AMP payload is present since it will only be settle-able
// by regular HTLCs.
case i.cfg.AcceptKeySend && ctx.amp == nil:
err := i.processKeySend(ctx)
if err != nil {
ctx.log(fmt.Sprintf("keysend error: %v", err))
return NewFailResolution(
circuitKey, currentHeight, ResultKeySendError,
), nil
}
}
// Execute locked notify exit hop logic.
i.Lock()
resolution, err := i.notifyExitHopHtlcLocked(&ctx, hodlChan)
i.Unlock()
if err != nil {
return nil, err
}
switch r := resolution.(type) {
// The htlc is held. Start a timer outside the lock if the htlc should
// be auto-released, because otherwise a deadlock may happen with the
// main event loop.
case *htlcAcceptResolution:
if r.autoRelease {
err := i.startHtlcTimer(
ctx.invoiceRef(), circuitKey, r.acceptTime,
)
if err != nil {
return nil, err
}
}
// We return a nil resolution because htlc acceptances are
// represented as nil resolutions externally.
// TODO(carla) update calling code to handle accept resolutions.
return nil, nil
// A direct resolution was received for this htlc.
case HtlcResolution:
return r, nil
// Fail if an unknown resolution type was received.
default:
return nil, errors.New("invalid resolution type")
}
}
// notifyExitHopHtlcLocked is the internal implementation of NotifyExitHopHtlc
// that should be executed inside the registry lock.
func (i *InvoiceRegistry) notifyExitHopHtlcLocked(
ctx *invoiceUpdateCtx, hodlChan chan<- interface{}) (
HtlcResolution, error) {
// We'll attempt to settle an invoice matching this rHash on disk (if
// one exists). The callback will update the invoice state and/or htlcs.
var (
resolution HtlcResolution
updateSubscribers bool
)
invoice, err := i.cdb.UpdateInvoice(
ctx.invoiceRef(),
func(inv *channeldb.Invoice) (
*channeldb.InvoiceUpdateDesc, error) {
updateDesc, res, err := updateInvoice(ctx, inv)
if err != nil {
return nil, err
}
// Only send an update if the invoice state was changed.
updateSubscribers = updateDesc != nil &&
updateDesc.State != nil
// Assign resolution to outer scope variable.
resolution = res
return updateDesc, nil
},
)
switch err {
case channeldb.ErrInvoiceNotFound:
// If the invoice was not found, return a failure resolution
// with an invoice not found result.
return NewFailResolution(
ctx.circuitKey, ctx.currentHeight,
ResultInvoiceNotFound,
), nil
case nil:
default:
ctx.log(err.Error())
return nil, err
}
switch res := resolution.(type) {
case *HtlcFailResolution:
// Inspect latest htlc state on the invoice. If it is found,
// we will update the accept height as it was recorded in the
// invoice database (which occurs in the case where the htlc
// reached the database in a previous call). If the htlc was
// not found on the invoice, it was immediately failed so we
// send the failure resolution as is, which has the current
// height set as the accept height.
invoiceHtlc, ok := invoice.Htlcs[ctx.circuitKey]
if ok {
res.AcceptHeight = int32(invoiceHtlc.AcceptHeight)
}
ctx.log(fmt.Sprintf("failure resolution result "+
"outcome: %v, at accept height: %v",
res.Outcome, res.AcceptHeight))
// Some failures apply to the entire HTLC set. Break here if
// this isn't one of them.
if !res.Outcome.IsSetFailure() {
break
}
// Also cancel any HTLCs in the HTLC set that are also in the
// canceled state with the same failure result.
setID := ctx.setID()
canceledHtlcSet := invoice.HTLCSet(setID, channeldb.HtlcStateCanceled)
for key, htlc := range canceledHtlcSet {
htlcFailResolution := NewFailResolution(
key, int32(htlc.AcceptHeight), res.Outcome,
)
i.notifyHodlSubscribers(htlcFailResolution)
}
// If the htlc was settled, we will settle any previously accepted
// htlcs and notify our peer to settle them.
case *HtlcSettleResolution:
ctx.log(fmt.Sprintf("settle resolution result "+
"outcome: %v, at accept height: %v",
res.Outcome, res.AcceptHeight))
// Also settle any previously accepted htlcs. If a htlc is
// marked as settled, we should follow now and settle the htlc
// with our peer.
setID := ctx.setID()
settledHtlcSet := invoice.HTLCSet(setID, channeldb.HtlcStateSettled)
for key, htlc := range settledHtlcSet {
preimage := res.Preimage
if htlc.AMP != nil && htlc.AMP.Preimage != nil {
preimage = *htlc.AMP.Preimage
}
// Notify subscribers that the htlcs should be settled
// with our peer. Note that the outcome of the
// resolution is set based on the outcome of the single
// htlc that we just settled, so may not be accurate
// for all htlcs.
htlcSettleResolution := NewSettleResolution(
preimage, key,
int32(htlc.AcceptHeight), res.Outcome,
)
// Notify subscribers that the htlc should be settled
// with our peer.
i.notifyHodlSubscribers(htlcSettleResolution)
}
// If concurrent payments were attempted to this invoice before
// the current one was ultimately settled, cancel back any of
// the HTLCs immediately. As a result of the settle, the HTLCs
// in other HTLC sets are automatically converted to a canceled
// state when updating the invoice.
canceledHtlcSet := invoice.HTLCSetCompliment(
setID, channeldb.HtlcStateCanceled,
)
for key, htlc := range canceledHtlcSet {
htlcFailResolution := NewFailResolution(
key, int32(htlc.AcceptHeight),
ResultInvoiceAlreadySettled,
)
i.notifyHodlSubscribers(htlcFailResolution)
}
// If we accepted the htlc, subscribe to the hodl invoice and return
// an accept resolution with the htlc's accept time on it.
case *htlcAcceptResolution:
invoiceHtlc, ok := invoice.Htlcs[ctx.circuitKey]
if !ok {
return nil, fmt.Errorf("accepted htlc: %v not"+
" present on invoice: %x", ctx.circuitKey,
ctx.hash[:])
}
// Determine accepted height of this htlc. If the htlc reached
// the invoice database (possibly in a previous call to the
// invoice registry), we'll take the original accepted height
// as it was recorded in the database.
acceptHeight := int32(invoiceHtlc.AcceptHeight)
ctx.log(fmt.Sprintf("accept resolution result "+
"outcome: %v, at accept height: %v",
res.outcome, acceptHeight))
// Auto-release the htlc if the invoice is still open. It can
// only happen for mpp payments that there are htlcs in state
// Accepted while the invoice is Open.
if invoice.State == channeldb.ContractOpen {
res.acceptTime = invoiceHtlc.AcceptTime
res.autoRelease = true
}
// If we have fully accepted the set of htlcs for this invoice,
// we can now add it to our invoice expiry watcher. We do not
// add invoices before they are fully accepted, because it is
// possible that we MppTimeout the htlcs, and then our relevant
// expiry height could change.
if res.outcome == resultAccepted {
expiry := makeInvoiceExpiry(ctx.hash, invoice)
i.expiryWatcher.AddInvoices(expiry)
}
i.hodlSubscribe(hodlChan, ctx.circuitKey)
default:
panic("unknown action")
}
// Now that the links have been notified of any state changes to their
// HTLCs, we'll go ahead and notify any clients wiaiting on the invoice
// state changes.
if updateSubscribers {
i.notifyClients(ctx.hash, invoice)
}
return resolution, nil
}
// SettleHodlInvoice sets the preimage of a hodl invoice.
func (i *InvoiceRegistry) SettleHodlInvoice(preimage lntypes.Preimage) error {
i.Lock()
defer i.Unlock()
updateInvoice := func(invoice *channeldb.Invoice) (
*channeldb.InvoiceUpdateDesc, error) {
switch invoice.State {
case channeldb.ContractOpen:
return nil, channeldb.ErrInvoiceStillOpen
case channeldb.ContractCanceled:
return nil, channeldb.ErrInvoiceAlreadyCanceled
case channeldb.ContractSettled:
return nil, channeldb.ErrInvoiceAlreadySettled
}
return &channeldb.InvoiceUpdateDesc{
State: &channeldb.InvoiceStateUpdateDesc{
NewState: channeldb.ContractSettled,
Preimage: &preimage,
},
}, nil
}
hash := preimage.Hash()
invoiceRef := channeldb.InvoiceRefByHash(hash)
invoice, err := i.cdb.UpdateInvoice(invoiceRef, updateInvoice)
if err != nil {
log.Errorf("SettleHodlInvoice with preimage %v: %v",
preimage, err)
return err
}
log.Debugf("Invoice%v: settled with preimage %v", invoiceRef,
invoice.Terms.PaymentPreimage)
// In the callback, we marked the invoice as settled. UpdateInvoice will
// have seen this and should have moved all htlcs that were accepted to
// the settled state. In the loop below, we go through all of these and
// notify links and resolvers that are waiting for resolution. Any htlcs
// that were already settled before, will be notified again. This isn't
// necessary but doesn't hurt either.
for key, htlc := range invoice.Htlcs {
if htlc.State != channeldb.HtlcStateSettled {
continue
}
resolution := NewSettleResolution(
preimage, key, int32(htlc.AcceptHeight), ResultSettled,
)
i.notifyHodlSubscribers(resolution)
}
i.notifyClients(hash, invoice)
return nil
}
// CancelInvoice attempts to cancel the invoice corresponding to the passed
// payment hash.
func (i *InvoiceRegistry) CancelInvoice(payHash lntypes.Hash) error {
return i.cancelInvoiceImpl(payHash, true)
}
// shouldCancel examines the state of an invoice and whether we want to
// cancel already accepted invoices, taking our force cancel boolean into
// account. This is pulled out into its own function so that tests that mock
// cancelInvoiceImpl can reuse this logic.
func shouldCancel(state channeldb.ContractState, cancelAccepted bool) bool {
if state != channeldb.ContractAccepted {
return true
}
// If the invoice is accepted, we should only cancel if we want to
// force cancelation of accepted invoices.
return cancelAccepted
}
// cancelInvoice attempts to cancel the invoice corresponding to the passed
// payment hash. Accepted invoices will only be canceled if explicitly
// requested to do so. It notifies subscribing links and resolvers that
// the associated htlcs were canceled if they change state.
func (i *InvoiceRegistry) cancelInvoiceImpl(payHash lntypes.Hash,
cancelAccepted bool) error {
i.Lock()
defer i.Unlock()
ref := channeldb.InvoiceRefByHash(payHash)
log.Debugf("Invoice%v: canceling invoice", ref)
updateInvoice := func(invoice *channeldb.Invoice) (
*channeldb.InvoiceUpdateDesc, error) {
if !shouldCancel(invoice.State, cancelAccepted) {
return nil, nil
}
// Move invoice to the canceled state. Rely on validation in
// channeldb to return an error if the invoice is already
// settled or canceled.
return &channeldb.InvoiceUpdateDesc{
State: &channeldb.InvoiceStateUpdateDesc{
NewState: channeldb.ContractCanceled,
},
}, nil
}
invoiceRef := channeldb.InvoiceRefByHash(payHash)
invoice, err := i.cdb.UpdateInvoice(invoiceRef, updateInvoice)
// Implement idempotency by returning success if the invoice was already
// canceled.
if err == channeldb.ErrInvoiceAlreadyCanceled {
log.Debugf("Invoice%v: already canceled", ref)
return nil
}
if err != nil {
return err
}
// Return without cancellation if the invoice state is ContractAccepted.
if invoice.State == channeldb.ContractAccepted {
log.Debugf("Invoice%v: remains accepted as cancel wasn't"+
"explicitly requested.", ref)
return nil
}
log.Debugf("Invoice%v: canceled", ref)
// In the callback, some htlcs may have been moved to the canceled
// state. We now go through all of these and notify links and resolvers
// that are waiting for resolution. Any htlcs that were already canceled
// before, will be notified again. This isn't necessary but doesn't hurt
// either.
for key, htlc := range invoice.Htlcs {
if htlc.State != channeldb.HtlcStateCanceled {
continue
}
i.notifyHodlSubscribers(
NewFailResolution(
key, int32(htlc.AcceptHeight), ResultCanceled,
),
)
}
i.notifyClients(payHash, invoice)
// Attempt to also delete the invoice if requested through the registry
// config.
if i.cfg.GcCanceledInvoicesOnTheFly {
// Assemble the delete reference and attempt to delete through
// the invocice from the DB.
deleteRef := channeldb.InvoiceDeleteRef{
PayHash: payHash,
AddIndex: invoice.AddIndex,
SettleIndex: invoice.SettleIndex,
}
if invoice.Terms.PaymentAddr != channeldb.BlankPayAddr {
deleteRef.PayAddr = &invoice.Terms.PaymentAddr
}
err = i.cdb.DeleteInvoice(
[]channeldb.InvoiceDeleteRef{deleteRef},
)
// If by any chance deletion failed, then log it instead of
// returning the error, as the invoice itsels has already been
// canceled.
if err != nil {
log.Warnf("Invoice%v could not be deleted: %v",
ref, err)
}
}
return nil
}
// notifyClients notifies all currently registered invoice notification clients
// of a newly added/settled invoice.
func (i *InvoiceRegistry) notifyClients(hash lntypes.Hash,
invoice *channeldb.Invoice) {
event := &invoiceEvent{
invoice: invoice,
hash: hash,
}
select {
case i.invoiceEvents <- event:
case <-i.quit:
}
}
// invoiceSubscriptionKit defines that are common to both all invoice
// subscribers and single invoice subscribers.
type invoiceSubscriptionKit struct {
id uint32
inv *InvoiceRegistry
ntfnQueue *queue.ConcurrentQueue
canceled uint32 // To be used atomically.
cancelChan chan struct{}
wg sync.WaitGroup
}
// InvoiceSubscription represents an intent to receive updates for newly added
// or settled invoices. For each newly added invoice, a copy of the invoice
// will be sent over the NewInvoices channel. Similarly, for each newly settled
// invoice, a copy of the invoice will be sent over the SettledInvoices
// channel.
type InvoiceSubscription struct {
invoiceSubscriptionKit
// NewInvoices is a channel that we'll use to send all newly created
// invoices with an invoice index greater than the specified
// StartingInvoiceIndex field.
NewInvoices chan *channeldb.Invoice
// SettledInvoices is a channel that we'll use to send all setted
// invoices with an invoices index greater than the specified
// StartingInvoiceIndex field.
SettledInvoices chan *channeldb.Invoice
// addIndex is the highest add index the caller knows of. We'll use
// this information to send out an event backlog to the notifications
// subscriber. Any new add events with an index greater than this will
// be dispatched before any new notifications are sent out.
addIndex uint64
// settleIndex is the highest settle index the caller knows of. We'll
// use this information to send out an event backlog to the
// notifications subscriber. Any new settle events with an index
// greater than this will be dispatched before any new notifications
// are sent out.
settleIndex uint64
}
// SingleInvoiceSubscription represents an intent to receive updates for a
// specific invoice.
type SingleInvoiceSubscription struct {
invoiceSubscriptionKit
invoiceRef channeldb.InvoiceRef
// Updates is a channel that we'll use to send all invoice events for
// the invoice that is subscribed to.
Updates chan *channeldb.Invoice
}
// Cancel unregisters the InvoiceSubscription, freeing any previously allocated
// resources.
func (i *invoiceSubscriptionKit) Cancel() {
if !atomic.CompareAndSwapUint32(&i.canceled, 0, 1) {
return
}
select {
case i.inv.subscriptionCancels <- i.id:
case <-i.inv.quit:
}
i.ntfnQueue.Stop()
close(i.cancelChan)
i.wg.Wait()
}
func (i *invoiceSubscriptionKit) notify(event *invoiceEvent) error {
select {
case i.ntfnQueue.ChanIn() <- event:
case <-i.inv.quit:
return ErrShuttingDown
}
return nil
}
// SubscribeNotifications returns an InvoiceSubscription which allows the
// caller to receive async notifications when any invoices are settled or
// added. The invoiceIndex parameter is a streaming "checkpoint". We'll start
// by first sending out all new events with an invoice index _greater_ than
// this value. Afterwards, we'll send out real-time notifications.
func (i *InvoiceRegistry) SubscribeNotifications(
addIndex, settleIndex uint64) (*InvoiceSubscription, error) {
client := &InvoiceSubscription{
NewInvoices: make(chan *channeldb.Invoice),
SettledInvoices: make(chan *channeldb.Invoice),
addIndex: addIndex,
settleIndex: settleIndex,
invoiceSubscriptionKit: invoiceSubscriptionKit{
inv: i,
ntfnQueue: queue.NewConcurrentQueue(20),
cancelChan: make(chan struct{}),
},
}
client.ntfnQueue.Start()
i.clientMtx.Lock()
client.id = i.nextClientID
i.nextClientID++
i.clientMtx.Unlock()
// Before we register this new invoice subscription, we'll launch a new
// goroutine that will proxy all notifications appended to the end of
// the concurrent queue to the two client-side channels the caller will
// feed off of.
i.wg.Add(1)
go func() {
defer i.wg.Done()
for {
select {
// A new invoice event has been sent by the
// invoiceRegistry! We'll figure out if this is an add
// event or a settle event, then dispatch the event to
// the client.
case ntfn := <-client.ntfnQueue.ChanOut():
invoiceEvent := ntfn.(*invoiceEvent)
var targetChan chan *channeldb.Invoice
state := invoiceEvent.invoice.State
switch state {
case channeldb.ContractOpen:
targetChan = client.NewInvoices
case channeldb.ContractSettled:
targetChan = client.SettledInvoices
default:
log.Errorf("unknown invoice "+
"state: %v", state)
continue
}
select {
case targetChan <- invoiceEvent.invoice:
case <-client.cancelChan:
return
case <-i.quit:
return
}
case <-client.cancelChan:
return
case <-i.quit:
return
}
}
}()
i.Lock()
defer i.Unlock()
// Query the database to see if based on the provided addIndex and
// settledIndex we need to deliver any backlog notifications.
err := i.deliverBacklogEvents(client)
if err != nil {
return nil, err
}
select {
case i.newSubscriptions <- client:
case <-i.quit:
return nil, ErrShuttingDown
}
return client, nil
}
// SubscribeSingleInvoice returns an SingleInvoiceSubscription which allows the
// caller to receive async notifications for a specific invoice.
func (i *InvoiceRegistry) SubscribeSingleInvoice(
hash lntypes.Hash) (*SingleInvoiceSubscription, error) {
client := &SingleInvoiceSubscription{
Updates: make(chan *channeldb.Invoice),
invoiceSubscriptionKit: invoiceSubscriptionKit{
inv: i,
ntfnQueue: queue.NewConcurrentQueue(20),
cancelChan: make(chan struct{}),
},
invoiceRef: channeldb.InvoiceRefByHash(hash),
}
client.ntfnQueue.Start()
i.clientMtx.Lock()
client.id = i.nextClientID
i.nextClientID++
i.clientMtx.Unlock()
// Before we register this new invoice subscription, we'll launch a new
// goroutine that will proxy all notifications appended to the end of
// the concurrent queue to the two client-side channels the caller will
// feed off of.
i.wg.Add(1)
go func() {
defer i.wg.Done()
for {
select {
// A new invoice event has been sent by the
// invoiceRegistry. We will dispatch the event to the
// client.
case ntfn := <-client.ntfnQueue.ChanOut():
invoiceEvent := ntfn.(*invoiceEvent)
select {
case client.Updates <- invoiceEvent.invoice:
case <-client.cancelChan:
return
case <-i.quit:
return
}
case <-client.cancelChan:
return
case <-i.quit:
return
}
}
}()
// Within the lock, we both query the invoice state and pass the client
// subscription to the invoiceEvents channel. This is to make sure that
// the client receives a consistent stream of events.
i.Lock()
defer i.Unlock()
err := i.deliverSingleBacklogEvents(client)
if err != nil {
return nil, err
}
select {
case i.invoiceEvents <- client:
case <-i.quit:
return nil, ErrShuttingDown
}
return client, nil
}
// notifyHodlSubscribers sends out the htlc resolution to all current
// subscribers.
func (i *InvoiceRegistry) notifyHodlSubscribers(htlcResolution HtlcResolution) {
subscribers, ok := i.hodlSubscriptions[htlcResolution.CircuitKey()]
if !ok {
return
}
// Notify all interested subscribers and remove subscription from both
// maps. The subscription can be removed as there only ever will be a
// single resolution for each hash.
for subscriber := range subscribers {
select {
case subscriber <- htlcResolution:
case <-i.quit:
return
}
delete(
i.hodlReverseSubscriptions[subscriber],
htlcResolution.CircuitKey(),
)
}
delete(i.hodlSubscriptions, htlcResolution.CircuitKey())
}
// hodlSubscribe adds a new invoice subscription.
func (i *InvoiceRegistry) hodlSubscribe(subscriber chan<- interface{},
circuitKey channeldb.CircuitKey) {
log.Debugf("Hodl subscribe for %v", circuitKey)
subscriptions, ok := i.hodlSubscriptions[circuitKey]
if !ok {
subscriptions = make(map[chan<- interface{}]struct{})
i.hodlSubscriptions[circuitKey] = subscriptions
}
subscriptions[subscriber] = struct{}{}
reverseSubscriptions, ok := i.hodlReverseSubscriptions[subscriber]
if !ok {
reverseSubscriptions = make(map[channeldb.CircuitKey]struct{})
i.hodlReverseSubscriptions[subscriber] = reverseSubscriptions
}
reverseSubscriptions[circuitKey] = struct{}{}
}
// HodlUnsubscribeAll cancels the subscription.
func (i *InvoiceRegistry) HodlUnsubscribeAll(subscriber chan<- interface{}) {
i.Lock()
defer i.Unlock()
hashes := i.hodlReverseSubscriptions[subscriber]
for hash := range hashes {
delete(i.hodlSubscriptions[hash], subscriber)
}
delete(i.hodlReverseSubscriptions, subscriber)
}