lnd.xprv/routing/router_test.go
2019-07-11 10:37:22 +02:00

3272 lines
94 KiB
Go

package routing
import (
"bytes"
"fmt"
"image/color"
"math/rand"
"strings"
"sync/atomic"
"testing"
"time"
"github.com/btcsuite/btcd/btcec"
"github.com/btcsuite/btcd/chaincfg/chainhash"
"github.com/btcsuite/btcd/wire"
"github.com/btcsuite/btcutil"
"github.com/davecgh/go-spew/spew"
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/htlcswitch"
"github.com/lightningnetwork/lnd/lntypes"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/lightningnetwork/lnd/routing/route"
"github.com/lightningnetwork/lnd/zpay32"
)
var uniquePaymentID uint64 = 1 // to be used atomically
type testCtx struct {
router *ChannelRouter
graph *channeldb.ChannelGraph
aliases map[string]route.Vertex
chain *mockChain
chainView *mockChainView
}
func (c *testCtx) RestartRouter() error {
// First, we'll reset the chainView's state as it doesn't persist the
// filter between restarts.
c.chainView.Reset()
// With the chainView reset, we'll now re-create the router itself, and
// start it.
router, err := New(Config{
Graph: c.graph,
Chain: c.chain,
ChainView: c.chainView,
Payer: &mockPaymentAttemptDispatcher{},
Control: makeMockControlTower(),
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
})
if err != nil {
return fmt.Errorf("unable to create router %v", err)
}
if err := router.Start(); err != nil {
return fmt.Errorf("unable to start router: %v", err)
}
// Finally, we'll swap out the pointer in the testCtx with this fresh
// instance of the router.
c.router = router
return nil
}
func copyPubKey(pub *btcec.PublicKey) *btcec.PublicKey {
return &btcec.PublicKey{
Curve: btcec.S256(),
X: pub.X,
Y: pub.Y,
}
}
func createTestCtxFromGraphInstance(startingHeight uint32, graphInstance *testGraphInstance) (
*testCtx, func(), error) {
// We'll initialize an instance of the channel router with mock
// versions of the chain and channel notifier. As we don't need to test
// any p2p functionality, the peer send and switch send messages won't
// be populated.
chain := newMockChain(startingHeight)
chainView := newMockChainView(chain)
selfNode, err := graphInstance.graph.SourceNode()
if err != nil {
return nil, nil, err
}
mc := NewMissionControl(
graphInstance.graph, selfNode,
func(e *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi {
return lnwire.NewMSatFromSatoshis(e.Capacity)
},
&MissionControlConfig{
MinRouteProbability: 0.01,
PaymentAttemptPenalty: 100,
PenaltyHalfLife: time.Hour,
AprioriHopProbability: 0.9,
},
)
router, err := New(Config{
Graph: graphInstance.graph,
Chain: chain,
ChainView: chainView,
Payer: &mockPaymentAttemptDispatcher{},
Control: makeMockControlTower(),
MissionControl: mc,
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
QueryBandwidth: func(e *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi {
return lnwire.NewMSatFromSatoshis(e.Capacity)
},
NextPaymentID: func() (uint64, error) {
next := atomic.AddUint64(&uniquePaymentID, 1)
return next, nil
},
})
if err != nil {
return nil, nil, fmt.Errorf("unable to create router %v", err)
}
if err := router.Start(); err != nil {
return nil, nil, fmt.Errorf("unable to start router: %v", err)
}
ctx := &testCtx{
router: router,
graph: graphInstance.graph,
aliases: graphInstance.aliasMap,
chain: chain,
chainView: chainView,
}
cleanUp := func() {
ctx.router.Stop()
graphInstance.cleanUp()
}
return ctx, cleanUp, nil
}
func createTestCtxSingleNode(startingHeight uint32) (*testCtx, func(), error) {
var (
graph *channeldb.ChannelGraph
sourceNode *channeldb.LightningNode
cleanup func()
err error
)
graph, cleanup, err = makeTestGraph()
if err != nil {
return nil, nil, fmt.Errorf("unable to create test graph: %v", err)
}
sourceNode, err = createTestNode()
if err != nil {
return nil, nil, fmt.Errorf("unable to create source node: %v", err)
}
if err = graph.SetSourceNode(sourceNode); err != nil {
return nil, nil, fmt.Errorf("unable to set source node: %v", err)
}
graphInstance := &testGraphInstance{
graph: graph,
cleanUp: cleanup,
}
return createTestCtxFromGraphInstance(startingHeight, graphInstance)
}
func createTestCtxFromFile(startingHeight uint32, testGraph string) (*testCtx, func(), error) {
// We'll attempt to locate and parse out the file
// that encodes the graph that our tests should be run against.
graphInstance, err := parseTestGraph(testGraph)
if err != nil {
return nil, nil, fmt.Errorf("unable to create test graph: %v", err)
}
return createTestCtxFromGraphInstance(startingHeight, graphInstance)
}
// TestFindRoutesWithFeeLimit asserts that routes found by the FindRoutes method
// within the channel router contain a total fee less than or equal to the fee
// limit.
func TestFindRoutesWithFeeLimit(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(
startingBlockHeight, basicGraphFilePath,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// This test will attempt to find routes from roasbeef to sophon for 100
// satoshis with a fee limit of 10 satoshis. There are two routes from
// roasbeef to sophon:
// 1. roasbeef -> songoku -> sophon
// 2. roasbeef -> phamnuwen -> sophon
// The second route violates our fee limit, so we should only expect to
// see the first route.
target := ctx.aliases["sophon"]
paymentAmt := lnwire.NewMSatFromSatoshis(100)
restrictions := &RestrictParams{
FeeLimit: lnwire.NewMSatFromSatoshis(10),
ProbabilitySource: noProbabilitySource,
}
route, err := ctx.router.FindRoute(
ctx.router.selfNode.PubKeyBytes,
target, paymentAmt, restrictions,
zpay32.DefaultFinalCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
if route.TotalFees() > restrictions.FeeLimit {
t.Fatalf("route exceeded fee limit: %v", spew.Sdump(route))
}
hops := route.Hops
if len(hops) != 2 {
t.Fatalf("expected 2 hops, got %d", len(hops))
}
if hops[0].PubKeyBytes != ctx.aliases["songoku"] {
t.Fatalf("expected first hop through songoku, got %s",
getAliasFromPubKey(hops[0].PubKeyBytes,
ctx.aliases))
}
}
// TestSendPaymentRouteFailureFallback tests that when sending a payment, if
// one of the target routes is seen as unavailable, then the next route in the
// queue is used instead. This process should continue until either a payment
// succeeds, or all routes have been exhausted.
func TestSendPaymentRouteFailureFallback(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to luo ji for 1000 satoshis, with a maximum of 1000 satoshis in fees.
var payHash [32]byte
paymentAmt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["luoji"],
Amount: paymentAmt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
sourceNode := ctx.router.selfNode
// We'll modify the SendToSwitch method that's been set within the
// router's configuration to ignore the path that has luo ji as the
// first hop. This should force the router to instead take the
// available two hop path (through satoshi).
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
roasbeefLuoji := lnwire.NewShortChanIDFromInt(689530843)
if firstHop == roasbeefLuoji {
pub, err := sourceNode.PubKey()
if err != nil {
return preImage, err
}
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: pub,
// TODO(roasbeef): temp node failure should be?
FailureMessage: &lnwire.FailTemporaryChannelFailure{},
}
}
return preImage, nil
})
// Send off the payment request to the router, route through satoshi
// should've been selected as a fall back and succeeded correctly.
paymentPreImage, route, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
// The route selected should have two hops
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
// The route should have satoshi as the first hop.
if route.Hops[0].PubKeyBytes != ctx.aliases["satoshi"] {
t.Fatalf("route should go through satoshi as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes,
ctx.aliases))
}
}
// TestChannelUpdateValidation tests that a failed payment with an associated
// channel update will only be applied to the graph when the update contains a
// valid signature.
func TestChannelUpdateValidation(t *testing.T) {
t.Parallel()
// Setup a three node network.
chanCapSat := btcutil.Amount(100000)
testChannels := []*testChannel{
symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 1),
symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 2),
}
testGraph, err := createTestGraphFromChannels(testChannels, "a")
defer testGraph.cleanUp()
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromGraphInstance(startingBlockHeight,
testGraph)
defer cleanUp()
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
// Assert that the initially configured fee is retrieved correctly.
_, policy, _, err := ctx.router.GetChannelByID(
lnwire.NewShortChanIDFromInt(1))
if err != nil {
t.Fatalf("cannot retrieve channel")
}
if policy.FeeProportionalMillionths != 400 {
t.Fatalf("invalid fee")
}
// Setup a route from source a to destination c. The route will be used
// in a call to SendToRoute. SendToRoute also applies channel updates,
// but it saves us from including RequestRoute in the test scope too.
hop1 := ctx.aliases["b"]
hop2 := ctx.aliases["c"]
hops := []*route.Hop{
{
ChannelID: 1,
PubKeyBytes: hop1,
},
{
ChannelID: 2,
PubKeyBytes: hop2,
},
}
rt, err := route.NewRouteFromHops(
lnwire.MilliSatoshi(10000), 100,
ctx.aliases["a"], hops,
)
if err != nil {
t.Fatalf("unable to create route: %v", err)
}
// Set up a channel update message with an invalid signature to be
// returned to the sender.
var invalidSignature [64]byte
errChanUpdate := lnwire.ChannelUpdate{
Signature: invalidSignature,
FeeRate: 500,
ShortChannelID: lnwire.NewShortChanIDFromInt(1),
Timestamp: uint32(testTime.Add(time.Minute).Unix()),
}
// We'll modify the SendToSwitch method so that it simulates a failed
// payment with an error originating from the first hop of the route.
// The unsigned channel update is attached to the failure message.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
v := ctx.aliases["b"]
source, err := btcec.ParsePubKey(
v[:], btcec.S256(),
)
if err != nil {
t.Fatal(err)
}
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: source,
FailureMessage: &lnwire.FailFeeInsufficient{
Update: errChanUpdate,
},
}
})
// The payment parameter is mostly redundant in SendToRoute. Can be left
// empty for this test.
var payment lntypes.Hash
// Send off the payment request to the router. The specified route
// should be attempted and the channel update should be received by
// router and ignored because it is missing a valid signature.
_, err = ctx.router.SendToRoute(payment, rt)
if err == nil {
t.Fatalf("expected route to fail with channel update")
}
_, policy, _, err = ctx.router.GetChannelByID(
lnwire.NewShortChanIDFromInt(1))
if err != nil {
t.Fatalf("cannot retrieve channel")
}
if policy.FeeProportionalMillionths != 400 {
t.Fatalf("fee updated without valid signature")
}
// Next, add a signature to the channel update.
chanUpdateMsg, err := errChanUpdate.DataToSign()
if err != nil {
t.Fatal(err)
}
digest := chainhash.DoubleHashB(chanUpdateMsg)
sig, err := testGraph.privKeyMap["b"].Sign(digest)
if err != nil {
t.Fatal(err)
}
errChanUpdate.Signature, err = lnwire.NewSigFromSignature(sig)
if err != nil {
t.Fatal(err)
}
// Retry the payment using the same route as before.
_, err = ctx.router.SendToRoute(payment, rt)
if err == nil {
t.Fatalf("expected route to fail with channel update")
}
// This time a valid signature was supplied and the policy change should
// have been applied to the graph.
_, policy, _, err = ctx.router.GetChannelByID(
lnwire.NewShortChanIDFromInt(1))
if err != nil {
t.Fatalf("cannot retrieve channel")
}
if policy.FeeProportionalMillionths != 500 {
t.Fatalf("fee not updated even though signature is valid")
}
}
// TestSendPaymentErrorRepeatedFeeInsufficient tests that if we receive
// multiple fee related errors from a channel that we're attempting to route
// through, then we'll prune the channel after the second attempt.
func TestSendPaymentErrorRepeatedFeeInsufficient(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to luo ji for 100 satoshis.
var payHash [32]byte
amt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["sophon"],
Amount: amt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
// We'll also fetch the first outgoing channel edge from roasbeef to
// son goku. We'll obtain this as we'll need to to generate the
// FeeInsufficient error that we'll send back.
chanID := uint64(12345)
_, _, edgeUpdateToFail, err := ctx.graph.FetchChannelEdgesByID(chanID)
if err != nil {
t.Fatalf("unable to fetch chan id: %v", err)
}
errChanUpdate := lnwire.ChannelUpdate{
ShortChannelID: lnwire.NewShortChanIDFromInt(chanID),
Timestamp: uint32(edgeUpdateToFail.LastUpdate.Unix()),
MessageFlags: edgeUpdateToFail.MessageFlags,
ChannelFlags: edgeUpdateToFail.ChannelFlags,
TimeLockDelta: edgeUpdateToFail.TimeLockDelta,
HtlcMinimumMsat: edgeUpdateToFail.MinHTLC,
HtlcMaximumMsat: edgeUpdateToFail.MaxHTLC,
BaseFee: uint32(edgeUpdateToFail.FeeBaseMSat),
FeeRate: uint32(edgeUpdateToFail.FeeProportionalMillionths),
}
// The error will be returned by Son Goku.
sourceNode := ctx.aliases["songoku"]
// We'll now modify the SendToSwitch method to return an error for the
// outgoing channel to Son goku. This will be a fee related error, so
// it should only cause the edge to be pruned after the second attempt.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
roasbeefSongoku := lnwire.NewShortChanIDFromInt(chanID)
if firstHop == roasbeefSongoku {
sourceKey, err := btcec.ParsePubKey(
sourceNode[:], btcec.S256(),
)
if err != nil {
t.Fatal(err)
}
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourceKey,
// Within our error, we'll add a channel update
// which is meant to reflect he new fee
// schedule for the node/channel.
FailureMessage: &lnwire.FailFeeInsufficient{
Update: errChanUpdate,
},
}
}
return preImage, nil
})
// Send off the payment request to the router, route through satoshi
// should've been selected as a fall back and succeeded correctly.
paymentPreImage, route, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
// The route selected should have two hops
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
// The route should have pham nuwen as the first hop.
if route.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] {
t.Fatalf("route should go through satoshi as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes,
ctx.aliases))
}
}
// TestSendPaymentErrorNonFinalTimeLockErrors tests that if we receive either
// an ExpiryTooSoon or a IncorrectCltvExpiry error from a node, then we prune
// that node from the available graph witin a mission control session. This
// test ensures that we'll route around errors due to nodes not knowing the
// current block height.
func TestSendPaymentErrorNonFinalTimeLockErrors(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to sophon for 1k satoshis.
var payHash [32]byte
amt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["sophon"],
Amount: amt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
// We'll also fetch the first outgoing channel edge from roasbeef to
// son goku. This edge will be included in the time lock related expiry
// errors that we'll get back due to disagrements in what the current
// block height is.
chanID := uint64(12345)
roasbeefSongoku := lnwire.NewShortChanIDFromInt(chanID)
_, _, edgeUpdateToFail, err := ctx.graph.FetchChannelEdgesByID(chanID)
if err != nil {
t.Fatalf("unable to fetch chan id: %v", err)
}
errChanUpdate := lnwire.ChannelUpdate{
ShortChannelID: lnwire.NewShortChanIDFromInt(chanID),
Timestamp: uint32(edgeUpdateToFail.LastUpdate.Unix()),
MessageFlags: edgeUpdateToFail.MessageFlags,
ChannelFlags: edgeUpdateToFail.ChannelFlags,
TimeLockDelta: edgeUpdateToFail.TimeLockDelta,
HtlcMinimumMsat: edgeUpdateToFail.MinHTLC,
HtlcMaximumMsat: edgeUpdateToFail.MaxHTLC,
BaseFee: uint32(edgeUpdateToFail.FeeBaseMSat),
FeeRate: uint32(edgeUpdateToFail.FeeProportionalMillionths),
}
// The error will be returned by Son Goku.
sourceNode := ctx.aliases["songoku"]
// We'll now modify the SendToSwitch method to return an error for the
// outgoing channel to son goku. Since this is a time lock related
// error, we should fail the payment flow all together, as Goku is the
// only channel to Sophon.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefSongoku {
sourceKey, err := btcec.ParsePubKey(
sourceNode[:], btcec.S256(),
)
if err != nil {
t.Fatal(err)
}
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourceKey,
FailureMessage: &lnwire.FailExpiryTooSoon{
Update: errChanUpdate,
},
}
}
return preImage, nil
})
// assertExpectedPath is a helper function that asserts the returned
// route properly routes around the failure we've introduced in the
// graph.
assertExpectedPath := func(retPreImage [32]byte, route *route.Route) {
// The route selected should have two hops
if len(route.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(route.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(retPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], retPreImage[:])
}
// The route should have satoshi as the first hop.
if route.Hops[0].PubKeyBytes != ctx.aliases["phamnuwen"] {
t.Fatalf("route should go through phamnuwen as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(route.Hops[0].PubKeyBytes,
ctx.aliases))
}
}
// Send off the payment request to the router, this payment should
// succeed as we should actually go through Pham Nuwen in order to get
// to Sophon, even though he has higher fees.
paymentPreImage, rt, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
assertExpectedPath(paymentPreImage, rt)
// We'll now modify the error return an IncorrectCltvExpiry error
// instead, this should result in the same behavior of roasbeef routing
// around the faulty Son Goku node.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefSongoku {
sourceKey, err := btcec.ParsePubKey(
sourceNode[:], btcec.S256(),
)
if err != nil {
t.Fatal(err)
}
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourceKey,
FailureMessage: &lnwire.FailIncorrectCltvExpiry{
Update: errChanUpdate,
},
}
}
return preImage, nil
})
// Once again, Roasbeef should route around Goku since they disagree
// w.r.t to the block height, and instead go through Pham Nuwen. We
// flip a bit in the payment hash to allow resending this payment.
payment.PaymentHash[1] ^= 1
paymentPreImage, rt, err = ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
assertExpectedPath(paymentPreImage, rt)
}
// TestSendPaymentErrorPathPruning tests that the send of candidate routes
// properly gets pruned in response to ForwardingError response from the
// underlying SendToSwitch function.
func TestSendPaymentErrorPathPruning(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Craft a LightningPayment struct that'll send a payment from roasbeef
// to luo ji for 1000 satoshis, with a maximum of 1000 satoshis in fees.
var payHash [32]byte
paymentAmt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: ctx.aliases["luoji"],
Amount: paymentAmt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
sourceNode, err := ctx.graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
sourcePub, err := sourceNode.PubKey()
if err != nil {
t.Fatalf("unable to fetch source node pub: %v", err)
}
roasbeefLuoji := lnwire.NewShortChanIDFromInt(689530843)
// First, we'll modify the SendToSwitch method to return an error
// indicating that the channel from roasbeef to luoji is not operable
// with an UnknownNextPeer.
//
// TODO(roasbeef): filtering should be intelligent enough so just not
// go through satoshi at all at this point.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefLuoji {
// We'll first simulate an error from the first
// outgoing link to simulate the channel from luo ji to
// roasbeef not having enough capacity.
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourcePub,
FailureMessage: &lnwire.FailTemporaryChannelFailure{},
}
}
// Next, we'll create an error from satoshi to indicate
// that the luoji node is not longer online, which should
// prune out the rest of the routes.
roasbeefSatoshi := lnwire.NewShortChanIDFromInt(2340213491)
if firstHop == roasbeefSatoshi {
vertex := ctx.aliases["satoshi"]
key, err := btcec.ParsePubKey(
vertex[:], btcec.S256(),
)
if err != nil {
t.Fatal(err)
}
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: key,
FailureMessage: &lnwire.FailUnknownNextPeer{},
}
}
return preImage, nil
})
ctx.router.cfg.MissionControl.(*MissionControl).ResetHistory()
// When we try to dispatch that payment, we should receive an error as
// both attempts should fail and cause both routes to be pruned.
_, _, err = ctx.router.SendPayment(&payment)
if err == nil {
t.Fatalf("payment didn't return error")
}
// The final error returned should also indicate that the peer wasn't
// online (the last error we returned).
if !strings.Contains(err.Error(), "UnknownNextPeer") {
t.Fatalf("expected UnknownNextPeer instead got: %v", err)
}
ctx.router.cfg.MissionControl.(*MissionControl).ResetHistory()
// Next, we'll modify the SendToSwitch method to indicate that luo ji
// wasn't originally online. This should also halt the send all
// together as all paths contain luoji and he can't be reached.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefLuoji {
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourcePub,
FailureMessage: &lnwire.FailUnknownNextPeer{},
}
}
return preImage, nil
})
// This shouldn't return an error, as we'll make a payment attempt via
// the satoshi channel based on the assumption that there might be an
// intermittent issue with the roasbeef <-> lioji channel.
paymentPreImage, rt, err := ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable send payment: %v", err)
}
// This path should go: roasbeef -> satoshi -> luoji
if len(rt.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(rt.Hops))
}
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
if rt.Hops[0].PubKeyBytes != ctx.aliases["satoshi"] {
t.Fatalf("route should go through satoshi as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(rt.Hops[0].PubKeyBytes,
ctx.aliases))
}
ctx.router.cfg.MissionControl.(*MissionControl).ResetHistory()
// Finally, we'll modify the SendToSwitch function to indicate that the
// roasbeef -> luoji channel has insufficient capacity. This should
// again cause us to instead go via the satoshi route.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
if firstHop == roasbeefLuoji {
// We'll first simulate an error from the first
// outgoing link to simulate the channel from luo ji to
// roasbeef not having enough capacity.
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: sourcePub,
FailureMessage: &lnwire.FailTemporaryChannelFailure{},
}
}
return preImage, nil
})
// We flip a bit in the payment hash to allow resending this payment.
payment.PaymentHash[1] ^= 1
paymentPreImage, rt, err = ctx.router.SendPayment(&payment)
if err != nil {
t.Fatalf("unable to send payment: %v", err)
}
// This should succeed finally. The route selected should have two
// hops.
if len(rt.Hops) != 2 {
t.Fatalf("incorrect route length: expected %v got %v", 2,
len(rt.Hops))
}
// The preimage should match up with the once created above.
if !bytes.Equal(paymentPreImage[:], preImage[:]) {
t.Fatalf("incorrect preimage used: expected %x got %x",
preImage[:], paymentPreImage[:])
}
// The route should have satoshi as the first hop.
if rt.Hops[0].PubKeyBytes != ctx.aliases["satoshi"] {
t.Fatalf("route should go through satoshi as first hop, "+
"instead passes through: %v",
getAliasFromPubKey(rt.Hops[0].PubKeyBytes,
ctx.aliases))
}
}
// TestAddProof checks that we can update the channel proof after channel
// info was added to the database.
func TestAddProof(t *testing.T) {
t.Parallel()
ctx, cleanup, err := createTestCtxSingleNode(0)
if err != nil {
t.Fatal(err)
}
defer cleanup()
// Before creating out edge, we'll create two new nodes within the
// network that the channel will connect.
node1, err := createTestNode()
if err != nil {
t.Fatal(err)
}
node2, err := createTestNode()
if err != nil {
t.Fatal(err)
}
// In order to be able to add the edge we should have a valid funding
// UTXO within the blockchain.
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(), bitcoinKey2.SerializeCompressed(),
100, 0)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
// After utxo was recreated adding the edge without the proof.
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: nil,
}
copy(edge.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Now we'll attempt to update the proof and check that it has been
// properly updated.
if err := ctx.router.AddProof(*chanID, &testAuthProof); err != nil {
t.Fatalf("unable to add proof: %v", err)
}
info, _, _, err := ctx.router.GetChannelByID(*chanID)
if info.AuthProof == nil {
t.Fatal("proof have been updated")
}
}
// TestIgnoreNodeAnnouncement tests that adding a node to the router that is
// not known from any channel announcement, leads to the announcement being
// ignored.
func TestIgnoreNodeAnnouncement(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight,
basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
pub := priv1.PubKey()
node := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(123, 0),
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node11",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(node.PubKeyBytes[:], pub.SerializeCompressed())
err = ctx.router.AddNode(node)
if !IsError(err, ErrIgnored) {
t.Fatalf("expected to get ErrIgnore, instead got: %v", err)
}
}
// TestIgnoreChannelEdgePolicyForUnknownChannel checks that a router will
// ignore a channel policy for a channel not in the graph.
func TestIgnoreChannelEdgePolicyForUnknownChannel(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
// Setup an initially empty network.
testChannels := []*testChannel{}
testGraph, err := createTestGraphFromChannels(
testChannels, "roasbeef",
)
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
defer testGraph.cleanUp()
ctx, cleanUp, err := createTestCtxFromGraphInstance(
startingBlockHeight, testGraph,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
var pub1 [33]byte
copy(pub1[:], priv1.PubKey().SerializeCompressed())
var pub2 [33]byte
copy(pub2[:], priv2.PubKey().SerializeCompressed())
// Add the edge between the two unknown nodes to the graph, and check
// that the nodes are found after the fact.
fundingTx, _, chanID, err := createChannelEdge(
ctx, bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(), 10000, 500,
)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
edgePolicy := &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
// Attempt to update the edge. This should be ignored, since the edge
// is not yet added to the router.
err = ctx.router.UpdateEdge(edgePolicy)
if !IsError(err, ErrIgnored) {
t.Fatalf("expected to get ErrIgnore, instead got: %v", err)
}
// Add the edge.
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("expected to be able to add edge to the channel graph,"+
" even though the vertexes were unknown: %v.", err)
}
// Now updating the edge policy should succeed.
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
}
// TestAddEdgeUnknownVertexes tests that if an edge is added that contains two
// vertexes which we don't know of, the edge should be available for use
// regardless. This is due to the fact that we don't actually need node
// announcements for the channel vertexes to be able to use the channel.
func TestAddEdgeUnknownVertexes(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight,
basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
var pub1 [33]byte
copy(pub1[:], priv1.PubKey().SerializeCompressed())
var pub2 [33]byte
copy(pub2[:], priv2.PubKey().SerializeCompressed())
// The two nodes we are about to add should not exist yet.
_, exists1, err := ctx.graph.HasLightningNode(pub1)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if exists1 {
t.Fatalf("node already existed")
}
_, exists2, err := ctx.graph.HasLightningNode(pub2)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if exists2 {
t.Fatalf("node already existed")
}
// Add the edge between the two unknown nodes to the graph, and check
// that the nodes are found after the fact.
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("expected to be able to add edge to the channel graph,"+
" even though the vertexes were unknown: %v.", err)
}
// We must add the edge policy to be able to use the edge for route
// finding.
edgePolicy := &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 0
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// Create edge in the other direction as well.
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 1
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// After adding the edge between the two previously unknown nodes, they
// should have been added to the graph.
_, exists1, err = ctx.graph.HasLightningNode(pub1)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if !exists1 {
t.Fatalf("node1 was not added to the graph")
}
_, exists2, err = ctx.graph.HasLightningNode(pub2)
if err != nil {
t.Fatalf("unable to query graph: %v", err)
}
if !exists2 {
t.Fatalf("node2 was not added to the graph")
}
// We will connect node1 to the rest of the test graph, and make sure
// we can find a route to node2, which will use the just added channel
// edge.
// We will connect node 1 to "sophon"
connectNode := ctx.aliases["sophon"]
connectNodeKey, err := btcec.ParsePubKey(connectNode[:], btcec.S256())
if err != nil {
t.Fatal(err)
}
var (
pubKey1 *btcec.PublicKey
pubKey2 *btcec.PublicKey
)
node1Bytes := priv1.PubKey().SerializeCompressed()
node2Bytes := connectNode
if bytes.Compare(node1Bytes[:], node2Bytes[:]) == -1 {
pubKey1 = priv1.PubKey()
pubKey2 = connectNodeKey
} else {
pubKey1 = connectNodeKey
pubKey2 = priv1.PubKey()
}
fundingTx, _, chanID, err = createChannelEdge(ctx,
pubKey1.SerializeCompressed(), pubKey2.SerializeCompressed(),
10000, 510)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock = &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge = &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
AuthProof: nil,
}
copy(edge.NodeKey1Bytes[:], node1Bytes)
edge.NodeKey2Bytes = node2Bytes
copy(edge.BitcoinKey1Bytes[:], node1Bytes)
edge.BitcoinKey2Bytes = node2Bytes
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge to the channel graph: %v.", err)
}
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 0
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: testTime,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 1
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// We should now be able to find a route to node 2.
paymentAmt := lnwire.NewMSatFromSatoshis(100)
targetNode := priv2.PubKey()
var targetPubKeyBytes route.Vertex
copy(targetPubKeyBytes[:], targetNode.SerializeCompressed())
_, err = ctx.router.FindRoute(
ctx.router.selfNode.PubKeyBytes,
targetPubKeyBytes, paymentAmt, noRestrictions,
zpay32.DefaultFinalCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
// Now check that we can update the node info for the partial node
// without messing up the channel graph.
n1 := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(123, 0),
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node11",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(n1.PubKeyBytes[:], priv1.PubKey().SerializeCompressed())
if err := ctx.router.AddNode(n1); err != nil {
t.Fatalf("could not add node: %v", err)
}
n2 := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: time.Unix(123, 0),
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node22",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(n2.PubKeyBytes[:], priv2.PubKey().SerializeCompressed())
if err := ctx.router.AddNode(n2); err != nil {
t.Fatalf("could not add node: %v", err)
}
// Should still be able to find the route, and the info should be
// updated.
_, err = ctx.router.FindRoute(
ctx.router.selfNode.PubKeyBytes,
targetPubKeyBytes, paymentAmt, noRestrictions,
zpay32.DefaultFinalCLTVDelta,
)
if err != nil {
t.Fatalf("unable to find any routes: %v", err)
}
copy1, err := ctx.graph.FetchLightningNode(priv1.PubKey())
if err != nil {
t.Fatalf("unable to fetch node: %v", err)
}
if copy1.Alias != n1.Alias {
t.Fatalf("fetched node not equal to original")
}
copy2, err := ctx.graph.FetchLightningNode(priv2.PubKey())
if err != nil {
t.Fatalf("unable to fetch node: %v", err)
}
if copy2.Alias != n2.Alias {
t.Fatalf("fetched node not equal to original")
}
}
// TestWakeUpOnStaleBranch tests that upon startup of the ChannelRouter, if the
// the chain previously reflected in the channel graph is stale (overtaken by a
// longer chain), the channel router will prune the graph for any channels
// confirmed on the stale chain, and resync to the main chain.
func TestWakeUpOnStaleBranch(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
const chanValue = 10000
// chanID1 will not be reorged out.
var chanID1 uint64
// chanID2 will be reorged out.
var chanID2 uint64
// Create 10 common blocks, confirming chanID1.
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := startingBlockHeight + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID1 = chanID.ToUint64()
}
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
_, forkHeight, err := ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to ge best block: %v", err)
}
// Create 10 blocks on the minority chain, confirming chanID2.
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID2 = chanID.ToUint64()
}
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
// Now add the two edges to the channel graph, and check that they
// correctly show up in the database.
node1, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
node2, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
edge1 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID1,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge1); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
edge2 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID2,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge2.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge2.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge2); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Check that the fundingTxs are in the graph db.
_, _, has, isZombie, err := ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if !has {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
// Stop the router, so we can reorg the chain while its offline.
if err := ctx.router.Stop(); err != nil {
t.Fatalf("unable to stop router: %v", err)
}
// Create a 15 block fork.
for i := uint32(1); i <= 15; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
}
// Give time to process new blocks.
time.Sleep(time.Millisecond * 500)
// Create new router with same graph database.
router, err := New(Config{
Graph: ctx.graph,
Chain: ctx.chain,
ChainView: ctx.chainView,
Payer: &mockPaymentAttemptDispatcher{},
Control: makeMockControlTower(),
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
})
if err != nil {
t.Fatalf("unable to create router %v", err)
}
// It should resync to the longer chain on startup.
if err := router.Start(); err != nil {
t.Fatalf("unable to start router: %v", err)
}
// The channel with chanID2 should not be in the database anymore,
// since it is not confirmed on the longest chain. chanID1 should
// still be.
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("did not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if has {
t.Fatalf("found edge in graph")
}
if isZombie {
t.Fatal("reorged edge should not be marked as zombie")
}
}
// TestDisconnectedBlocks checks that the router handles a reorg happening when
// it is active.
func TestDisconnectedBlocks(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
const chanValue = 10000
// chanID1 will not be reorged out, while chanID2 will be reorged out.
var chanID1, chanID2 uint64
// Create 10 common blocks, confirming chanID1.
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := startingBlockHeight + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID1 = chanID.ToUint64()
}
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
_, forkHeight, err := ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to get best block: %v", err)
}
// Create 10 blocks on the minority chain, confirming chanID2.
var minorityChain []*wire.MsgBlock
for i := uint32(1); i <= 10; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
if i == 5 {
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, height)
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block.Transactions = append(block.Transactions,
fundingTx)
chanID2 = chanID.ToUint64()
}
minorityChain = append(minorityChain, block)
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
[]*wire.MsgTx{})
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
// Now add the two edges to the channel graph, and check that they
// correctly show up in the database.
node1, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
node2, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
edge1 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID1,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
BitcoinKey1Bytes: node1.PubKeyBytes,
BitcoinKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge1); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
edge2 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID2,
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
BitcoinKey1Bytes: node1.PubKeyBytes,
BitcoinKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge2.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge2.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge2); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Check that the fundingTxs are in the graph db.
_, _, has, isZombie, err := ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if !has {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
// Create a 15 block fork. We first let the chainView notify the router
// about stale blocks, before sending the now connected blocks. We do
// this because we expect this order from the chainview.
for i := len(minorityChain) - 1; i >= 0; i-- {
block := minorityChain[i]
height := uint32(forkHeight) + uint32(i) + 1
ctx.chainView.notifyStaleBlock(block.BlockHash(), height,
block.Transactions)
}
for i := uint32(1); i <= 15; i++ {
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
height := uint32(forkHeight) + i
ctx.chain.addBlock(block, height, rand.Uint32())
ctx.chain.setBestBlock(int32(height))
ctx.chainView.notifyBlock(block.BlockHash(), height,
block.Transactions)
}
// Give time to process new blocks
time.Sleep(time.Millisecond * 500)
// chanID2 should not be in the database anymore, since it is not
// confirmed on the longest chain. chanID1 should still be.
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID1)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !has {
t.Fatalf("did not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
_, _, has, isZombie, err = ctx.graph.HasChannelEdge(chanID2)
if err != nil {
t.Fatalf("error looking for edge: %v", chanID2)
}
if has {
t.Fatalf("found edge in graph")
}
if isZombie {
t.Fatal("reorged edge should not be marked as zombie")
}
}
// TestChansClosedOfflinePruneGraph tests that if channels we know of are
// closed while we're offline, then once we resume operation of the
// ChannelRouter, then the channels are properly pruned.
func TestRouterChansClosedOfflinePruneGraph(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
const chanValue = 10000
// First, we'll create a channel, to be mined shortly at height 102.
block102 := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
nextHeight := startingBlockHeight + 1
fundingTx1, chanUTXO, chanID1, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
chanValue, uint32(nextHeight))
if err != nil {
t.Fatalf("unable create channel edge: %v", err)
}
block102.Transactions = append(block102.Transactions, fundingTx1)
ctx.chain.addBlock(block102, uint32(nextHeight), rand.Uint32())
ctx.chain.setBestBlock(int32(nextHeight))
ctx.chainView.notifyBlock(block102.BlockHash(), uint32(nextHeight),
[]*wire.MsgTx{})
// We'll now create the edges and nodes within the database required
// for the ChannelRouter to properly recognize the channel we added
// above.
node1, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
node2, err := createTestNode()
if err != nil {
t.Fatalf("unable to create test node: %v", err)
}
edge1 := &channeldb.ChannelEdgeInfo{
ChannelID: chanID1.ToUint64(),
NodeKey1Bytes: node1.PubKeyBytes,
NodeKey2Bytes: node2.PubKeyBytes,
AuthProof: &channeldb.ChannelAuthProof{
NodeSig1Bytes: testSig.Serialize(),
NodeSig2Bytes: testSig.Serialize(),
BitcoinSig1Bytes: testSig.Serialize(),
BitcoinSig2Bytes: testSig.Serialize(),
},
}
copy(edge1.BitcoinKey1Bytes[:], bitcoinKey1.SerializeCompressed())
copy(edge1.BitcoinKey2Bytes[:], bitcoinKey2.SerializeCompressed())
if err := ctx.router.AddEdge(edge1); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// The router should now be aware of the channel we created above.
_, _, hasChan, isZombie, err := ctx.graph.HasChannelEdge(chanID1.ToUint64())
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if !hasChan {
t.Fatalf("could not find edge in graph")
}
if isZombie {
t.Fatal("edge was marked as zombie")
}
// With the transaction included, and the router's database state
// updated, we'll now mine 5 additional blocks on top of it.
for i := 0; i < 5; i++ {
nextHeight++
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
ctx.chain.addBlock(block, uint32(nextHeight), rand.Uint32())
ctx.chain.setBestBlock(int32(nextHeight))
ctx.chainView.notifyBlock(block.BlockHash(), uint32(nextHeight),
[]*wire.MsgTx{})
}
// At this point, our starting height should be 107.
_, chainHeight, err := ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to get best block: %v", err)
}
if chainHeight != 107 {
t.Fatalf("incorrect chain height: expected %v, got %v",
107, chainHeight)
}
// Next, we'll "shut down" the router in order to simulate downtime.
if err := ctx.router.Stop(); err != nil {
t.Fatalf("unable to shutdown router: %v", err)
}
// While the router is "offline" we'll mine 5 additional blocks, with
// the second block closing the channel we created above.
for i := 0; i < 5; i++ {
nextHeight++
block := &wire.MsgBlock{
Transactions: []*wire.MsgTx{},
}
if i == 2 {
// For the second block, we'll add a transaction that
// closes the channel we created above by spending the
// output.
closingTx := wire.NewMsgTx(2)
closingTx.AddTxIn(&wire.TxIn{
PreviousOutPoint: *chanUTXO,
})
block.Transactions = append(block.Transactions,
closingTx)
}
ctx.chain.addBlock(block, uint32(nextHeight), rand.Uint32())
ctx.chain.setBestBlock(int32(nextHeight))
ctx.chainView.notifyBlock(block.BlockHash(), uint32(nextHeight),
[]*wire.MsgTx{})
}
// At this point, our starting height should be 112.
_, chainHeight, err = ctx.chain.GetBestBlock()
if err != nil {
t.Fatalf("unable to get best block: %v", err)
}
if chainHeight != 112 {
t.Fatalf("incorrect chain height: expected %v, got %v",
112, chainHeight)
}
// Now we'll re-start the ChannelRouter. It should recognize that it's
// behind the main chain and prune all the blocks that it missed while
// it was down.
ctx.RestartRouter()
// At this point, the channel that was pruned should no longer be known
// by the router.
_, _, hasChan, isZombie, err = ctx.graph.HasChannelEdge(chanID1.ToUint64())
if err != nil {
t.Fatalf("error looking for edge: %v", chanID1)
}
if hasChan {
t.Fatalf("channel was found in graph but shouldn't have been")
}
if isZombie {
t.Fatal("closed channel should not be marked as zombie")
}
}
// TestPruneChannelGraphStaleEdges ensures that we properly prune stale edges
// from the channel graph.
func TestPruneChannelGraphStaleEdges(t *testing.T) {
t.Parallel()
freshTimestamp := time.Now()
staleTimestamp := time.Time{}
// We'll create the following test graph so that only the last channel
// is pruned.
testChannels := []*testChannel{
// No edges.
{
Node1: &testChannelEnd{Alias: "a"},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 1,
},
// Only one edge with a stale timestamp.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: staleTimestamp,
},
},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 2,
},
// Only one edge with a fresh timestamp.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: freshTimestamp,
},
},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 3,
},
// One edge fresh, one edge stale.
{
Node1: &testChannelEnd{
Alias: "c",
testChannelPolicy: &testChannelPolicy{
LastUpdate: freshTimestamp,
},
},
Node2: &testChannelEnd{
Alias: "d",
testChannelPolicy: &testChannelPolicy{
LastUpdate: staleTimestamp,
},
},
Capacity: 100000,
ChannelID: 4,
},
// Both edges fresh.
symmetricTestChannel("g", "h", 100000, &testChannelPolicy{
LastUpdate: freshTimestamp,
}, 5),
// Both edges stale, only one pruned.
symmetricTestChannel("e", "f", 100000, &testChannelPolicy{
LastUpdate: staleTimestamp,
}, 6),
}
// We'll create our test graph and router backed with these test
// channels we've created.
testGraph, err := createTestGraphFromChannels(testChannels, "a")
if err != nil {
t.Fatalf("unable to create test graph: %v", err)
}
defer testGraph.cleanUp()
const startingHeight = 100
ctx, cleanUp, err := createTestCtxFromGraphInstance(
startingHeight, testGraph,
)
if err != nil {
t.Fatalf("unable to create test context: %v", err)
}
defer cleanUp()
// All of the channels should exist before pruning them.
assertChannelsPruned(t, ctx.graph, testChannels)
// Proceed to prune the channels - only the last one should be pruned.
if err := ctx.router.pruneZombieChans(); err != nil {
t.Fatalf("unable to prune zombie channels: %v", err)
}
prunedChannel := testChannels[len(testChannels)-1].ChannelID
assertChannelsPruned(t, ctx.graph, testChannels, prunedChannel)
}
// TestPruneChannelGraphDoubleDisabled test that we can properly prune channels
// with both edges disabled from our channel graph.
func TestPruneChannelGraphDoubleDisabled(t *testing.T) {
t.Parallel()
// We'll create the following test graph so that only the last channel
// is pruned. We'll use a fresh timestamp to ensure they're not pruned
// according to that heuristic.
timestamp := time.Now()
testChannels := []*testChannel{
// Channel from self shouldn't be pruned.
symmetricTestChannel(
"self", "a", 100000, &testChannelPolicy{
LastUpdate: timestamp,
Disabled: true,
}, 99,
),
// No edges.
{
Node1: &testChannelEnd{Alias: "a"},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 1,
},
// Only one edge disabled.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: timestamp,
Disabled: true,
},
},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 2,
},
// Only one edge enabled.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: timestamp,
Disabled: false,
},
},
Node2: &testChannelEnd{Alias: "b"},
Capacity: 100000,
ChannelID: 3,
},
// One edge disabled, one edge enabled.
{
Node1: &testChannelEnd{
Alias: "a",
testChannelPolicy: &testChannelPolicy{
LastUpdate: timestamp,
Disabled: true,
},
},
Node2: &testChannelEnd{
Alias: "b",
testChannelPolicy: &testChannelPolicy{
LastUpdate: timestamp,
Disabled: false,
},
},
Capacity: 100000,
ChannelID: 1,
},
// Both edges enabled.
symmetricTestChannel("c", "d", 100000, &testChannelPolicy{
LastUpdate: timestamp,
Disabled: false,
}, 2),
// Both edges disabled, only one pruned.
symmetricTestChannel("e", "f", 100000, &testChannelPolicy{
LastUpdate: timestamp,
Disabled: true,
}, 3),
}
// We'll create our test graph and router backed with these test
// channels we've created.
testGraph, err := createTestGraphFromChannels(testChannels, "self")
if err != nil {
t.Fatalf("unable to create test graph: %v", err)
}
defer testGraph.cleanUp()
const startingHeight = 100
ctx, cleanUp, err := createTestCtxFromGraphInstance(
startingHeight, testGraph,
)
if err != nil {
t.Fatalf("unable to create test context: %v", err)
}
defer cleanUp()
// All the channels should exist within the graph before pruning them.
assertChannelsPruned(t, ctx.graph, testChannels)
// If we attempt to prune them without AssumeChannelValid being set,
// none should be pruned.
if err := ctx.router.pruneZombieChans(); err != nil {
t.Fatalf("unable to prune zombie channels: %v", err)
}
assertChannelsPruned(t, ctx.graph, testChannels)
// Now that AssumeChannelValid is set, we'll prune the graph again and
// the last channel should be the only one pruned.
ctx.router.cfg.AssumeChannelValid = true
if err := ctx.router.pruneZombieChans(); err != nil {
t.Fatalf("unable to prune zombie channels: %v", err)
}
prunedChannel := testChannels[len(testChannels)-1].ChannelID
assertChannelsPruned(t, ctx.graph, testChannels, prunedChannel)
}
// TestFindPathFeeWeighting tests that the findPath method will properly prefer
// routes with lower fees over routes with lower time lock values. This is
// meant to exercise the fact that the internal findPath method ranks edges
// with the square of the total fee in order bias towards lower fees.
func TestFindPathFeeWeighting(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight, basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
var preImage [32]byte
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
sourceNode, err := ctx.graph.SourceNode()
if err != nil {
t.Fatalf("unable to fetch source node: %v", err)
}
amt := lnwire.MilliSatoshi(100)
target := ctx.aliases["luoji"]
// We'll now attempt a path finding attempt using this set up. Due to
// the edge weighting, we should select the direct path over the 2 hop
// path even though the direct path has a higher potential time lock.
path, err := findPath(
&graphParams{
graph: ctx.graph,
},
noRestrictions,
sourceNode.PubKeyBytes, target, amt,
)
if err != nil {
t.Fatalf("unable to find path: %v", err)
}
// The route that was chosen should be exactly one hop, and should be
// directly to luoji.
if len(path) != 1 {
t.Fatalf("expected path length of 1, instead was: %v", len(path))
}
if path[0].Node.Alias != "luoji" {
t.Fatalf("wrong node: %v", path[0].Node.Alias)
}
}
// TestIsStaleNode tests that the IsStaleNode method properly detects stale
// node announcements.
func TestIsStaleNode(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Before we can insert a node in to the database, we need to create a
// channel that it's linked to.
var (
pub1 [33]byte
pub2 [33]byte
)
copy(pub1[:], priv1.PubKey().SerializeCompressed())
copy(pub2[:], priv2.PubKey().SerializeCompressed())
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Before we add the node, if we query for staleness, we should get
// false, as we haven't added the full node.
updateTimeStamp := time.Unix(123, 0)
if ctx.router.IsStaleNode(pub1, updateTimeStamp) {
t.Fatalf("incorrectly detected node as stale")
}
// With the node stub in the database, we'll add the fully node
// announcement to the database.
n1 := &channeldb.LightningNode{
HaveNodeAnnouncement: true,
LastUpdate: updateTimeStamp,
Addresses: testAddrs,
Color: color.RGBA{1, 2, 3, 0},
Alias: "node11",
AuthSigBytes: testSig.Serialize(),
Features: testFeatures,
}
copy(n1.PubKeyBytes[:], priv1.PubKey().SerializeCompressed())
if err := ctx.router.AddNode(n1); err != nil {
t.Fatalf("could not add node: %v", err)
}
// If we use the same timestamp and query for staleness, we should get
// true.
if !ctx.router.IsStaleNode(pub1, updateTimeStamp) {
t.Fatalf("failure to detect stale node update")
}
// If we update the timestamp and once again query for staleness, it
// should report false.
newTimeStamp := time.Unix(1234, 0)
if ctx.router.IsStaleNode(pub1, newTimeStamp) {
t.Fatalf("incorrectly detected node as stale")
}
}
// TestIsKnownEdge tests that the IsKnownEdge method properly detects stale
// channel announcements.
func TestIsKnownEdge(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxSingleNode(startingBlockHeight)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// First, we'll create a new channel edge (just the info) and insert it
// into the database.
var (
pub1 [33]byte
pub2 [33]byte
)
copy(pub1[:], priv1.PubKey().SerializeCompressed())
copy(pub2[:], priv2.PubKey().SerializeCompressed())
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// Now that the edge has been inserted, query is the router already
// knows of the edge should return true.
if !ctx.router.IsKnownEdge(*chanID) {
t.Fatalf("router should detect edge as known")
}
}
// TestIsStaleEdgePolicy tests that the IsStaleEdgePolicy properly detects
// stale channel edge update announcements.
func TestIsStaleEdgePolicy(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromFile(startingBlockHeight,
basicGraphFilePath)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// First, we'll create a new channel edge (just the info) and insert it
// into the database.
var (
pub1 [33]byte
pub2 [33]byte
)
copy(pub1[:], priv1.PubKey().SerializeCompressed())
copy(pub2[:], priv2.PubKey().SerializeCompressed())
fundingTx, _, chanID, err := createChannelEdge(ctx,
bitcoinKey1.SerializeCompressed(),
bitcoinKey2.SerializeCompressed(),
10000, 500)
if err != nil {
t.Fatalf("unable to create channel edge: %v", err)
}
fundingBlock := &wire.MsgBlock{
Transactions: []*wire.MsgTx{fundingTx},
}
ctx.chain.addBlock(fundingBlock, chanID.BlockHeight, chanID.BlockHeight)
// If we query for staleness before adding the edge, we should get
// false.
updateTimeStamp := time.Unix(123, 0)
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) {
t.Fatalf("router failed to detect fresh edge policy")
}
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) {
t.Fatalf("router failed to detect fresh edge policy")
}
edge := &channeldb.ChannelEdgeInfo{
ChannelID: chanID.ToUint64(),
NodeKey1Bytes: pub1,
NodeKey2Bytes: pub2,
BitcoinKey1Bytes: pub1,
BitcoinKey2Bytes: pub2,
AuthProof: nil,
}
if err := ctx.router.AddEdge(edge); err != nil {
t.Fatalf("unable to add edge: %v", err)
}
// We'll also add two edge policies, one for each direction.
edgePolicy := &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: updateTimeStamp,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 0
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
edgePolicy = &channeldb.ChannelEdgePolicy{
SigBytes: testSig.Serialize(),
ChannelID: edge.ChannelID,
LastUpdate: updateTimeStamp,
TimeLockDelta: 10,
MinHTLC: 1,
FeeBaseMSat: 10,
FeeProportionalMillionths: 10000,
}
edgePolicy.ChannelFlags = 1
if err := ctx.router.UpdateEdge(edgePolicy); err != nil {
t.Fatalf("unable to update edge policy: %v", err)
}
// Now that the edges have been added, an identical (chanID, flag,
// timestamp) tuple for each edge should be detected as a stale edge.
if !ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) {
t.Fatalf("router failed to detect stale edge policy")
}
if !ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) {
t.Fatalf("router failed to detect stale edge policy")
}
// If we now update the timestamp for both edges, the router should
// detect that this tuple represents a fresh edge.
updateTimeStamp = time.Unix(9999, 0)
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 0) {
t.Fatalf("router failed to detect fresh edge policy")
}
if ctx.router.IsStaleEdgePolicy(*chanID, updateTimeStamp, 1) {
t.Fatalf("router failed to detect fresh edge policy")
}
}
// TestEmptyRoutesGenerateSphinxPacket tests that the generateSphinxPacket
// function is able to gracefully handle being passed a nil set of hops for the
// route by the caller.
func TestEmptyRoutesGenerateSphinxPacket(t *testing.T) {
t.Parallel()
sessionKey, _ := btcec.NewPrivateKey(btcec.S256())
emptyRoute := &route.Route{}
_, _, err := generateSphinxPacket(emptyRoute, testHash[:], sessionKey)
if err != route.ErrNoRouteHopsProvided {
t.Fatalf("expected empty hops error: instead got: %v", err)
}
}
// assertChannelsPruned ensures that only the given channels are pruned from the
// graph out of the set of all channels.
func assertChannelsPruned(t *testing.T, graph *channeldb.ChannelGraph,
channels []*testChannel, prunedChanIDs ...uint64) {
t.Helper()
pruned := make(map[uint64]struct{}, len(channels))
for _, chanID := range prunedChanIDs {
pruned[chanID] = struct{}{}
}
for _, channel := range channels {
_, shouldPrune := pruned[channel.ChannelID]
_, _, exists, isZombie, err := graph.HasChannelEdge(
channel.ChannelID,
)
if err != nil {
t.Fatalf("unable to determine existence of "+
"channel=%v in the graph: %v",
channel.ChannelID, err)
}
if !shouldPrune && !exists {
t.Fatalf("expected channel=%v to exist within "+
"the graph", channel.ChannelID)
}
if shouldPrune && exists {
t.Fatalf("expected channel=%v to not exist "+
"within the graph", channel.ChannelID)
}
if !shouldPrune && isZombie {
t.Fatalf("expected channel=%v to not be marked "+
"as zombie", channel.ChannelID)
}
if shouldPrune && !isZombie {
t.Fatalf("expected channel=%v to be marked as "+
"zombie", channel.ChannelID)
}
}
}
// TestRouterPaymentStateMachine tests that the router interacts as expected
// with the ControlTower during a payment lifecycle, such that it payment
// attempts are not sent twice to the switch, and results are handled after a
// restart.
func TestRouterPaymentStateMachine(t *testing.T) {
t.Parallel()
const startingBlockHeight = 101
// Setup two simple channels such that we can mock sending along this
// route.
chanCapSat := btcutil.Amount(100000)
testChannels := []*testChannel{
symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 1),
symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 2),
}
testGraph, err := createTestGraphFromChannels(testChannels, "a")
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
defer testGraph.cleanUp()
hop1 := testGraph.aliasMap["b"]
hop2 := testGraph.aliasMap["c"]
hops := []*route.Hop{
{
ChannelID: 1,
PubKeyBytes: hop1,
},
{
ChannelID: 2,
PubKeyBytes: hop2,
},
}
// We create a simple route that we will supply every time the router
// requests one.
rt, err := route.NewRouteFromHops(
lnwire.MilliSatoshi(10000), 100, testGraph.aliasMap["a"], hops,
)
if err != nil {
t.Fatalf("unable to create route: %v", err)
}
// A payment state machine test case consists of several ordered steps,
// that we use for driving the scenario.
type testCase struct {
// steps is a list of steps to perform during the testcase.
steps []string
// routes is the sequence of routes we will provide to the
// router when it requests a new route.
routes []*route.Route
}
const (
// routerInitPayment is a test step where we expect the router
// to call the InitPayment method on the control tower.
routerInitPayment = "Router:init-payment"
// routerRegisterAttempt is a test step where we expect the
// router to call the RegisterAttempt method on the control
// tower.
routerRegisterAttempt = "Router:register-attempt"
// routerSuccess is a test step where we expect the router to
// call the Success method on the control tower.
routerSuccess = "Router:success"
// routerFail is a test step where we expect the router to call
// the Fail method on the control tower.
routerFail = "Router:fail"
// sendToSwitchSuccess is a step where we expect the router to
// call send the payment attempt to the switch, and we will
// respond with a non-error, indicating that the payment
// attempt was successfully forwarded.
sendToSwitchSuccess = "SendToSwitch:success"
// sendToSwitchResultFailure is a step where we expect the
// router to send the payment attempt to the switch, and we
// will respond with a forwarding error. This can happen when
// forwarding fail on our local links.
sendToSwitchResultFailure = "SendToSwitch:failure"
// getPaymentResultSuccess is a test step where we expect the
// router to call the GetPaymentResult method, and we will
// respond with a successful payment result.
getPaymentResultSuccess = "GetPaymentResult:success"
// getPaymentResultFailure is a test step where we expect the
// router to call the GetPaymentResult method, and we will
// respond with a forwarding error.
getPaymentResultFailure = "GetPaymentResult:failure"
// resendPayment is a test step where we manually try to resend
// the same payment, making sure the router responds with an
// error indicating that it is alreayd in flight.
resendPayment = "ResendPayment"
// startRouter is a step where we manually start the router,
// used to test that it automatically will resume payments at
// startup.
startRouter = "StartRouter"
// stopRouter is a test step where we manually make the router
// shut down.
stopRouter = "StopRouter"
// paymentSuccess is a step where assert that we receive a
// successful result for the original payment made.
paymentSuccess = "PaymentSuccess"
// paymentError is a step where assert that we receive an error
// for the original payment made.
paymentError = "PaymentError"
// resentPaymentSuccess is a step where assert that we receive
// a successful result for a payment that was resent.
resentPaymentSuccess = "ResentPaymentSuccess"
// resentPaymentError is a step where assert that we receive an
// error for a payment that was resent.
resentPaymentError = "ResentPaymentError"
)
tests := []testCase{
{
// Tests a normal payment flow that succeeds.
steps: []string{
routerInitPayment,
routerRegisterAttempt,
sendToSwitchSuccess,
getPaymentResultSuccess,
routerSuccess,
paymentSuccess,
},
routes: []*route.Route{rt},
},
{
// A payment flow with a failure on the first attempt,
// but that succeeds on the second attempt.
steps: []string{
routerInitPayment,
routerRegisterAttempt,
sendToSwitchSuccess,
// Make the first sent attempt fail.
getPaymentResultFailure,
// The router should retry.
routerRegisterAttempt,
sendToSwitchSuccess,
// Make the second sent attempt succeed.
getPaymentResultSuccess,
routerSuccess,
paymentSuccess,
},
routes: []*route.Route{rt, rt},
},
{
// A payment flow with a forwarding failure first time
// sending to the switch, but that succeeds on the
// second attempt.
steps: []string{
routerInitPayment,
routerRegisterAttempt,
// Make the first sent attempt fail.
sendToSwitchResultFailure,
// The router should retry.
routerRegisterAttempt,
sendToSwitchSuccess,
// Make the second sent attempt succeed.
getPaymentResultSuccess,
routerSuccess,
paymentSuccess,
},
routes: []*route.Route{rt, rt},
},
{
// A payment that fails on the first attempt, and has
// only one route available to try. It will therefore
// fail permanently.
steps: []string{
routerInitPayment,
routerRegisterAttempt,
sendToSwitchSuccess,
// Make the first sent attempt fail.
getPaymentResultFailure,
// Since there are no more routes to try, the
// payment should fail.
routerFail,
paymentError,
},
routes: []*route.Route{rt},
},
{
// We expect the payment to fail immediately if we have
// no routes to try.
steps: []string{
routerInitPayment,
routerFail,
paymentError,
},
routes: []*route.Route{},
},
{
// A normal payment flow, where we attempt to resend
// the same payment after each step. This ensures that
// the router don't attempt to resend a payment already
// in flight.
steps: []string{
routerInitPayment,
routerRegisterAttempt,
// Manually resend the payment, the router
// should attempt to init with the control
// tower, but fail since it is already in
// flight.
resendPayment,
routerInitPayment,
resentPaymentError,
// The original payment should proceed as
// normal.
sendToSwitchSuccess,
// Again resend the payment and assert it's not
// allowed.
resendPayment,
routerInitPayment,
resentPaymentError,
// Notify about a success for the original
// payment.
getPaymentResultSuccess,
routerSuccess,
// Now that the original payment finished,
// resend it again to ensure this is not
// allowed.
resendPayment,
routerInitPayment,
resentPaymentError,
paymentSuccess,
},
routes: []*route.Route{rt},
},
{
// Tests that the router is able to handle the
// receieved payment result after a restart.
steps: []string{
routerInitPayment,
routerRegisterAttempt,
sendToSwitchSuccess,
// Shut down the router. The original caller
// should get notified about this.
stopRouter,
paymentError,
// Start the router again, and ensure the
// router registers the success with the
// control tower.
startRouter,
getPaymentResultSuccess,
routerSuccess,
},
routes: []*route.Route{rt},
},
{
// Tests that we are allowed to resend a payment after
// it has permanently failed.
steps: []string{
routerInitPayment,
routerRegisterAttempt,
sendToSwitchSuccess,
// Resending the payment at this stage should
// not be allowed.
resendPayment,
routerInitPayment,
resentPaymentError,
// Make the first attempt fail.
getPaymentResultFailure,
routerFail,
// Since we have no more routes to try, the
// original payment should fail.
paymentError,
// Now resend the payment again. This should be
// allowed, since the payment has failed.
resendPayment,
routerInitPayment,
routerRegisterAttempt,
sendToSwitchSuccess,
getPaymentResultSuccess,
routerSuccess,
resentPaymentSuccess,
},
routes: []*route.Route{rt},
},
}
// Create a mock control tower with channels set up, that we use to
// synchronize and listen for events.
control := makeMockControlTower()
control.init = make(chan initArgs)
control.register = make(chan registerArgs)
control.success = make(chan successArgs)
control.fail = make(chan failArgs)
control.fetchInFlight = make(chan struct{})
quit := make(chan struct{})
defer close(quit)
// setupRouter is a helper method that creates and starts the router in
// the desired configuration for this test.
setupRouter := func() (*ChannelRouter, chan error,
chan *htlcswitch.PaymentResult, chan error) {
chain := newMockChain(startingBlockHeight)
chainView := newMockChainView(chain)
// We set uo the use the following channels and a mock Payer to
// synchonize with the interaction to the Switch.
sendResult := make(chan error)
paymentResultErr := make(chan error)
paymentResult := make(chan *htlcswitch.PaymentResult)
payer := &mockPayer{
sendResult: sendResult,
paymentResult: paymentResult,
paymentResultErr: paymentResultErr,
}
router, err := New(Config{
Graph: testGraph.graph,
Chain: chain,
ChainView: chainView,
Control: control,
MissionControl: &mockPaymentSessionSource{},
Payer: payer,
ChannelPruneExpiry: time.Hour * 24,
GraphPruneInterval: time.Hour * 2,
QueryBandwidth: func(e *channeldb.ChannelEdgeInfo) lnwire.MilliSatoshi {
return lnwire.NewMSatFromSatoshis(e.Capacity)
},
NextPaymentID: func() (uint64, error) {
next := atomic.AddUint64(&uniquePaymentID, 1)
return next, nil
},
})
if err != nil {
t.Fatalf("unable to create router %v", err)
}
// On startup, the router should fetch all pending payments
// from the ControlTower, so assert that here.
didFetch := make(chan struct{})
go func() {
select {
case <-control.fetchInFlight:
close(didFetch)
case <-time.After(1 * time.Second):
t.Fatalf("router did not fetch in flight " +
"payments")
}
}()
if err := router.Start(); err != nil {
t.Fatalf("unable to start router: %v", err)
}
select {
case <-didFetch:
case <-time.After(1 * time.Second):
t.Fatalf("did not fetch in flight payments at startup")
}
return router, sendResult, paymentResult, paymentResultErr
}
router, sendResult, getPaymentResult, getPaymentResultErr := setupRouter()
defer router.Stop()
for _, test := range tests {
// Craft a LightningPayment struct.
var preImage lntypes.Preimage
if _, err := rand.Read(preImage[:]); err != nil {
t.Fatalf("unable to generate preimage")
}
payHash := preImage.Hash()
paymentAmt := lnwire.NewMSatFromSatoshis(1000)
payment := LightningPayment{
Target: testGraph.aliasMap["c"],
Amount: paymentAmt,
FeeLimit: noFeeLimit,
PaymentHash: payHash,
}
errSource, err := btcec.ParsePubKey(hop1[:], btcec.S256())
if err != nil {
t.Fatalf("unable to fetch source node pub: %v", err)
}
copy(preImage[:], bytes.Repeat([]byte{9}, 32))
router.cfg.MissionControl = &mockPaymentSessionSource{
routes: test.routes,
}
// Send the payment. Since this is new payment hash, the
// information should be registered with the ControlTower.
paymentResult := make(chan error)
go func() {
_, _, err := router.SendPayment(&payment)
paymentResult <- err
}()
var resendResult chan error
for _, step := range test.steps {
switch step {
case routerInitPayment:
var args initArgs
select {
case args = <-control.init:
case <-time.After(1 * time.Second):
t.Fatalf("no init payment with control")
}
if args.c == nil {
t.Fatalf("expected non-nil CreationInfo")
}
// In this step we expect the router to make a call to
// register a new attempt with the ControlTower.
case routerRegisterAttempt:
var args registerArgs
select {
case args = <-control.register:
case <-time.After(1 * time.Second):
t.Fatalf("not registered with control")
}
if args.a == nil {
t.Fatalf("expected non-nil AttemptInfo")
}
// In this step we expect the router to call the
// ControlTower's Succcess method with the preimage.
case routerSuccess:
select {
case _ = <-control.success:
case <-time.After(1 * time.Second):
t.Fatalf("not registered with control")
}
// In this step we expect the router to call the
// ControlTower's Fail method, to indicate that the
// payment failed.
case routerFail:
select {
case _ = <-control.fail:
case <-time.After(1 * time.Second):
t.Fatalf("not registered with control")
}
// In this step we expect the SendToSwitch method to be
// called, and we respond with a nil-error.
case sendToSwitchSuccess:
select {
case sendResult <- nil:
case <-time.After(1 * time.Second):
t.Fatalf("unable to send result")
}
// In this step we expect the SendToSwitch method to be
// called, and we respond with a forwarding error
case sendToSwitchResultFailure:
select {
case sendResult <- &htlcswitch.ForwardingError{
ErrorSource: errSource,
FailureMessage: &lnwire.FailTemporaryChannelFailure{},
}:
case <-time.After(1 * time.Second):
t.Fatalf("unable to send result")
}
// In this step we expect the GetPaymentResult method
// to be called, and we respond with the preimage to
// complete the payment.
case getPaymentResultSuccess:
select {
case getPaymentResult <- &htlcswitch.PaymentResult{
Preimage: preImage,
}:
case <-time.After(1 * time.Second):
t.Fatalf("unable to send result")
}
// In this state we expect the GetPaymentResult method
// to be called, and we respond with a forwarding
// error, indicating that the router should retry.
case getPaymentResultFailure:
select {
case getPaymentResult <- &htlcswitch.PaymentResult{
Error: &htlcswitch.ForwardingError{
ErrorSource: errSource,
FailureMessage: &lnwire.FailTemporaryChannelFailure{},
},
}:
case <-time.After(1 * time.Second):
t.Fatalf("unable to get result")
}
// In this step we manually try to resend the same
// payment, making sure the router responds with an
// error indicating that it is alreayd in flight.
case resendPayment:
resendResult = make(chan error)
go func() {
_, _, err := router.SendPayment(&payment)
resendResult <- err
}()
// In this step we manually stop the router.
case stopRouter:
select {
case getPaymentResultErr <- fmt.Errorf(
"shutting down"):
case <-time.After(1 * time.Second):
t.Fatalf("unable to send payment " +
"result error")
}
if err := router.Stop(); err != nil {
t.Fatalf("unable to restart: %v", err)
}
// In this step we manually start the router.
case startRouter:
router, sendResult, getPaymentResult,
getPaymentResultErr = setupRouter()
// In this state we expect to receive an error for the
// original payment made.
case paymentError:
select {
case err := <-paymentResult:
if err == nil {
t.Fatalf("expected error")
}
case <-time.After(1 * time.Second):
t.Fatalf("got no payment result")
}
// In this state we expect the original payment to
// succeed.
case paymentSuccess:
select {
case err := <-paymentResult:
if err != nil {
t.Fatalf("did not expecte error %v", err)
}
case <-time.After(1 * time.Second):
t.Fatalf("got no payment result")
}
// In this state we expect to receive an error for the
// resent payment made.
case resentPaymentError:
select {
case err := <-resendResult:
if err == nil {
t.Fatalf("expected error")
}
case <-time.After(1 * time.Second):
t.Fatalf("got no payment result")
}
// In this state we expect the resent payment to
// succeed.
case resentPaymentSuccess:
select {
case err := <-resendResult:
if err != nil {
t.Fatalf("did not expect error %v", err)
}
case <-time.After(1 * time.Second):
t.Fatalf("got no payment result")
}
default:
t.Fatalf("unknown step %v", step)
}
}
}
}
// TestSendToRouteStructuredError asserts that SendToRoute returns a structured
// error.
func TestSendToRouteStructuredError(t *testing.T) {
t.Parallel()
// Setup a three node network.
chanCapSat := btcutil.Amount(100000)
testChannels := []*testChannel{
symmetricTestChannel("a", "b", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 1),
symmetricTestChannel("b", "c", chanCapSat, &testChannelPolicy{
Expiry: 144,
FeeRate: 400,
MinHTLC: 1,
MaxHTLC: lnwire.NewMSatFromSatoshis(chanCapSat),
}, 2),
}
testGraph, err := createTestGraphFromChannels(testChannels, "a")
if err != nil {
t.Fatalf("unable to create graph: %v", err)
}
defer testGraph.cleanUp()
const startingBlockHeight = 101
ctx, cleanUp, err := createTestCtxFromGraphInstance(
startingBlockHeight, testGraph,
)
if err != nil {
t.Fatalf("unable to create router: %v", err)
}
defer cleanUp()
// Set up an init channel for the control tower, such that we can make
// sure the payment is initiated correctly.
init := make(chan initArgs, 1)
ctx.router.cfg.Control.(*mockControlTower).init = init
// Setup a route from source a to destination c. The route will be used
// in a call to SendToRoute. SendToRoute also applies channel updates,
// but it saves us from including RequestRoute in the test scope too.
const payAmt = lnwire.MilliSatoshi(10000)
hop1 := ctx.aliases["b"]
hop2 := ctx.aliases["c"]
hops := []*route.Hop{
{
ChannelID: 1,
PubKeyBytes: hop1,
AmtToForward: payAmt,
},
{
ChannelID: 2,
PubKeyBytes: hop2,
AmtToForward: payAmt,
},
}
rt, err := route.NewRouteFromHops(payAmt, 100, ctx.aliases["a"], hops)
if err != nil {
t.Fatalf("unable to create route: %v", err)
}
// We'll modify the SendToSwitch method so that it simulates a failed
// payment with an error originating from the first hop of the route.
// The unsigned channel update is attached to the failure message.
ctx.router.cfg.Payer.(*mockPaymentAttemptDispatcher).setPaymentResult(
func(firstHop lnwire.ShortChannelID) ([32]byte, error) {
v := ctx.aliases["b"]
source, err := btcec.ParsePubKey(
v[:], btcec.S256(),
)
if err != nil {
t.Fatal(err)
}
return [32]byte{}, &htlcswitch.ForwardingError{
ErrorSource: source,
FailureMessage: &lnwire.FailFeeInsufficient{
Update: lnwire.ChannelUpdate{},
},
}
})
// The payment parameter is mostly redundant in SendToRoute. Can be left
// empty for this test.
var payment lntypes.Hash
// Send off the payment request to the router. The specified route
// should be attempted and the channel update should be received by
// router and ignored because it is missing a valid signature.
_, err = ctx.router.SendToRoute(payment, rt)
fErr, ok := err.(*htlcswitch.ForwardingError)
if !ok {
t.Fatalf("expected forwarding error")
}
if _, ok := fErr.FailureMessage.(*lnwire.FailFeeInsufficient); !ok {
t.Fatalf("expected fee insufficient error")
}
// Check that the correct values were used when initiating the payment.
select {
case initVal := <-init:
if initVal.c.Value != payAmt {
t.Fatalf("expected %v, got %v", payAmt, initVal.c.Value)
}
case <-time.After(100 * time.Millisecond):
t.Fatalf("initPayment not called")
}
}