lnd.xprv/discovery/service.go

920 lines
30 KiB
Go

package discovery
import (
"bytes"
"sync"
"sync/atomic"
"time"
"github.com/davecgh/go-spew/spew"
"github.com/go-errors/errors"
"github.com/lightningnetwork/lnd/chainntnfs"
"github.com/lightningnetwork/lnd/channeldb"
"github.com/lightningnetwork/lnd/lnwire"
"github.com/lightningnetwork/lnd/routing"
"github.com/roasbeef/btcd/btcec"
"github.com/roasbeef/btcutil"
)
// waitingProofKey is the proof key which uniquely identifies the announcement
// signature message. The goal of this key is distinguish the local and remote
// proof for the same channel id.
//
// TODO(andrew.shvv) move to the channeldb package after waiting proof map
// becomes persistent.
type waitingProofKey struct {
chanID uint64
isRemote bool
}
// networkMsg couples a routing related wire message with the peer that
// originally sent it.
type networkMsg struct {
peer *btcec.PublicKey
msg lnwire.Message
isRemote bool
err chan error
}
// syncRequest represents a request from an outside subsystem to the wallet to
// sync a new node to the latest graph state.
type syncRequest struct {
node *btcec.PublicKey
}
// Config defines the configuration for the service. ALL elements within the
// configuration MUST be non-nil for the service to carry out its duties.
type Config struct {
// Router is the subsystem which is responsible for managing the
// topology of lightning network. After incoming channel, node, channel
// updates announcements are validated they are sent to the router in
// order to be included in the LN graph.
Router routing.ChannelGraphSource
// Notifier is used for receiving notifications of incoming blocks.
// With each new incoming block found we process previously premature
// announcements.
//
// TODO(roasbeef): could possibly just replace this with an epoch
// channel.
Notifier chainntnfs.ChainNotifier
// Broadcast broadcasts a particular set of announcements to all peers
// that the daemon is connected to. If supplied, the exclude parameter
// indicates that the target peer should be excluded from the
// broadcast.
Broadcast func(exclude *btcec.PublicKey, msg ...lnwire.Message) error
// SendToPeer is a function which allows the service to send a set of
// messages to a particular peer identified by the target public key.
SendToPeer func(target *btcec.PublicKey, msg ...lnwire.Message) error
// ProofMatureDelta the number of confirmations which is needed before
// exchange the channel announcement proofs.
ProofMatureDelta uint32
// TrickleDelay the period of trickle timer which flushing to the
// network the pending batch of new announcements we've received since
// the last trickle tick.
TrickleDelay time.Duration
}
// New creates a new AuthenticatedGossiper instance, initialized with the
// passed configuration paramters.
func New(cfg Config) (*AuthenticatedGossiper, error) {
return &AuthenticatedGossiper{
cfg: &cfg,
networkMsgs: make(chan *networkMsg),
quit: make(chan struct{}),
syncRequests: make(chan *syncRequest),
prematureAnnouncements: make(map[uint32][]*networkMsg),
waitingProofs: make(map[waitingProofKey]*lnwire.AnnounceSignatures),
}, nil
}
// AuthenticatedGossiper is a subsystem which is responsible for receiving
// announcements validate them and apply the changes to router, syncing
// lightning network with newly connected nodes, broadcasting announcements
// after validation, negotiating the channel announcement proofs exchange and
// handling the premature announcements. All outgoing announcements are
// expected to be properly signed as dictated in BOLT#7, additionally, all
// incoming message are expected to be well formed and signed. Invalid messages
// will be rejected by this struct.
type AuthenticatedGossiper struct {
// Parameters which are needed to properly handle the start and stop of
// the service.
started uint32
stopped uint32
quit chan struct{}
wg sync.WaitGroup
// cfg is a copy of the configuration struct that the discovery service
// was initialized with.
cfg *Config
// newBlocks is a channel in which new blocks connected to the end of
// the main chain are sent over.
newBlocks <-chan *chainntnfs.BlockEpoch
// prematureAnnouncements maps a block height to a set of network
// messages which are "premature" from our PoV. An message is premature
// if it claims to be anchored in a block which is beyond the current
// main chain tip as we know it. Premature network messages will be
// processed once the chain tip as we know it extends to/past the
// premature height.
//
// TODO(roasbeef): limit premature networkMsgs to N
prematureAnnouncements map[uint32][]*networkMsg
// waitingProofs is a map of partial channel proof announcement
// messages. We use this map to buffer half of the material needed to
// reconstruct a full authenticated channel announcement. Once we
// receive the other half the channel proof, we'll be able to properly
// validate it an re-broadcast it out to the network.
//
// TODO(andrew.shvv) make this map persistent.
waitingProofs map[waitingProofKey]*lnwire.AnnounceSignatures
// networkMsgs is a channel that carries new network broadcasted
// message from outside the discovery service to be processed by the
// networkHandler.
networkMsgs chan *networkMsg
// syncRequests is a channel that carries requests to synchronize newly
// connected peers to the state of the lightning network topology from
// our PoV.
syncRequests chan *syncRequest
// bestHeight is the height of the block at the tip of the main chain
// as we know it.
bestHeight uint32
}
// SynchronizeNode sends a message to the service indicating it should
// synchronize lightning topology state with the target node. This method is to
// be utilized when a node connections for the first time to provide it with
// the latest topology update state.
func (d *AuthenticatedGossiper) SynchronizeNode(pub *btcec.PublicKey) {
select {
case d.syncRequests <- &syncRequest{
node: pub,
}:
case <-d.quit:
return
}
}
// Start spawns network messages handler goroutine and registers on new block
// notifications in order to properly handle the premature announcements.
func (d *AuthenticatedGossiper) Start() error {
if !atomic.CompareAndSwapUint32(&d.started, 0, 1) {
return nil
}
log.Info("Authenticated Gossiper is starting")
// First we register for new notifications of newly discovered blocks.
// We do this immediately so we'll later be able to consume any/all
// blocks which were discovered.
blockEpochs, err := d.cfg.Notifier.RegisterBlockEpochNtfn()
if err != nil {
return err
}
d.newBlocks = blockEpochs.Epochs
height, err := d.cfg.Router.CurrentBlockHeight()
if err != nil {
return err
}
d.bestHeight = height
d.wg.Add(1)
go d.networkHandler()
return nil
}
// Stop signals any active goroutines for a graceful closure.
func (d *AuthenticatedGossiper) Stop() {
if !atomic.CompareAndSwapUint32(&d.stopped, 0, 1) {
return
}
log.Info("Authenticated Gossiper is stopping")
close(d.quit)
d.wg.Wait()
}
// ProcessRemoteAnnouncement sends a new remote announcement message along with
// the peer that sent the routing message. The announcement will be processed
// then added to a queue for batched trickled announcement to all connected
// peers. Remote channel announcements should contain the announcement proof
// and be fully validated.
func (d *AuthenticatedGossiper) ProcessRemoteAnnouncement(msg lnwire.Message,
src *btcec.PublicKey) chan error {
nMsg := &networkMsg{
msg: msg,
isRemote: true,
peer: src,
err: make(chan error, 1),
}
select {
case d.networkMsgs <- nMsg:
case <-d.quit:
nMsg.err <- errors.New("discovery has shut down")
}
return nMsg.err
}
// ProcessLocalAnnouncement sends a new remote announcement message along with
// the peer that sent the routing message. The announcement will be processed
// then added to a queue for batched trickled announcement to all connected
// peers. Local channel announcements don't contain the announcement proof and
// will not be fully validated. Once the channel proofs are received, the
// entire channel announcement and update messages will be re-constructed and
// broadcast to the rest of the network.
func (d *AuthenticatedGossiper) ProcessLocalAnnouncement(msg lnwire.Message,
src *btcec.PublicKey) chan error {
nMsg := &networkMsg{
msg: msg,
isRemote: false,
peer: src,
err: make(chan error, 1),
}
select {
case d.networkMsgs <- nMsg:
case <-d.quit:
nMsg.err <- errors.New("discovery has shut down")
}
return nMsg.err
}
// networkHandler is the primary goroutine that drives this service. The roles
// of this goroutine includes answering queries related to the state of the
// network, syncing up newly connected peers, and also periodically
// broadcasting our latest topology state to all connected peers.
//
// NOTE: This MUST be run as a goroutine.
func (d *AuthenticatedGossiper) networkHandler() {
defer d.wg.Done()
var announcementBatch []lnwire.Message
// TODO(roasbeef): parametrize the above
retransmitTimer := time.NewTicker(time.Minute * 30)
defer retransmitTimer.Stop()
// TODO(roasbeef): parametrize the above
trickleTimer := time.NewTicker(d.cfg.TrickleDelay)
defer trickleTimer.Stop()
for {
select {
case announcement := <-d.networkMsgs:
// Process the network announcement to determine if
// this is either a new announcement from our PoV or an
// edges to a prior vertex/edge we previously
// proceeded.
emittedAnnouncements := d.processNetworkAnnouncement(announcement)
// If the announcement was accepted, then add the
// emitted announcements to our announce batch to be
// broadcast once the trickle timer ticks gain.
if emittedAnnouncements != nil {
// TODO(roasbeef): exclude peer that sent
announcementBatch = append(
announcementBatch,
emittedAnnouncements...,
)
}
// A new block has arrived, so we can re-process the previously
// premature announcements.
case newBlock, ok := <-d.newBlocks:
// If the channel has been closed, then this indicates
// the daemon is shutting down, so we exit ourselves.
if !ok {
return
}
// Once a new block arrives, we updates our running
// track of the height of the chain tip.
blockHeight := uint32(newBlock.Height)
d.bestHeight = blockHeight
// Next we check if we have any premature announcements
// for this height, if so, then we process them once
// more as normal announcements.
prematureAnns := d.prematureAnnouncements[uint32(newBlock.Height)]
if len(prematureAnns) != 0 {
log.Infof("Re-processing %v premature "+
"announcements for height %v",
len(prematureAnns), blockHeight)
}
for _, ann := range prematureAnns {
emittedAnnouncements := d.processNetworkAnnouncement(ann)
if emittedAnnouncements != nil {
announcementBatch = append(
announcementBatch,
emittedAnnouncements...,
)
}
}
delete(d.prematureAnnouncements, blockHeight)
// The trickle timer has ticked, which indicates we should
// flush to the network the pending batch of new announcements
// we've received since the last trickle tick.
case <-trickleTimer.C:
// If the current announcements batch is nil, then we
// have no further work here.
if len(announcementBatch) == 0 {
continue
}
log.Infof("Broadcasting batch of %v new announcements",
len(announcementBatch))
// If we have new things to announce then broadcast
// them to all our immediately connected peers.
err := d.cfg.Broadcast(nil, announcementBatch...)
if err != nil {
log.Errorf("unable to send batch "+
"announcements: %v", err)
continue
}
// If we're able to broadcast the current batch
// successfully, then we reset the batch for a new
// round of announcements.
announcementBatch = nil
// The retransmission timer has ticked which indicates that we
// should broadcast our personal channels to the network. This
// addresses the case of channel advertisements whether being
// dropped, or not properly propagated through the network.
case <-retransmitTimer.C:
var selfChans []lnwire.Message
// Iterate over our channels and construct the
// announcements array.
err := d.cfg.Router.ForAllOutgoingChannels(func(p *channeldb.ChannelEdgePolicy) error {
c := &lnwire.ChannelUpdate{
Signature: p.Signature,
ShortChannelID: lnwire.NewShortChanIDFromInt(p.ChannelID),
Timestamp: uint32(p.LastUpdate.Unix()),
Flags: p.Flags,
TimeLockDelta: p.TimeLockDelta,
HtlcMinimumMsat: uint32(p.MinHTLC),
FeeBaseMsat: uint32(p.FeeBaseMSat),
FeeProportionalMillionths: uint32(p.FeeProportionalMillionths),
}
selfChans = append(selfChans, c)
return nil
},
)
if err != nil {
log.Errorf("unable to retrieve outgoing channels: %v", err)
continue
}
if len(selfChans) == 0 {
continue
}
log.Debugf("Retransmitting %v outgoing channels",
len(selfChans))
// With all the wire announcements properly crafted,
// we'll broadcast our known outgoing channel to all
// our immediate peers.
if err := d.cfg.Broadcast(nil, selfChans...); err != nil {
log.Errorf("unable to re-broadcast "+
"channels: %v", err)
}
// We've just received a new request to synchronize a peer with
// our latest lightning network topology state. This indicates
// that a peer has just connected for the first time, so for
// now we dump our entire network graph and allow them to sift
// through the (subjectively) new information on their own.
case syncReq := <-d.syncRequests:
nodePub := syncReq.node.SerializeCompressed()
if err := d.synchronizeWithNode(syncReq); err != nil {
log.Errorf("unable to sync graph state with %x: %v",
nodePub, err)
}
// The discovery has been signalled to exit, to we exit our
// main loop so the wait group can be decremented.
case <-d.quit:
return
}
}
}
// processNetworkAnnouncement processes a new network relate authenticated
// channel or node announcement or announcements proofs. If the announcement
// didn't affect the internal state due to either being out of date, invalid,
// or redundant, then nil is returned. Otherwise, the set of announcements will
// be returned which should be broadcasted to the rest of the network.
func (d *AuthenticatedGossiper) processNetworkAnnouncement(nMsg *networkMsg) []lnwire.Message {
isPremature := func(chanID lnwire.ShortChannelID, delta uint32) bool {
return chanID.BlockHeight+delta > d.bestHeight
}
var announcements []lnwire.Message
switch msg := nMsg.msg.(type) {
// A new node announcement has arrived which either presents a new
// node, or a node updating previously advertised information.
case *lnwire.NodeAnnouncement:
if nMsg.isRemote {
if err := d.validateNodeAnn(msg); err != nil {
err := errors.Errorf("unable to validate "+
"node announcement: %v", err)
log.Error(err)
nMsg.err <- err
return nil
}
}
node := &channeldb.LightningNode{
LastUpdate: time.Unix(int64(msg.Timestamp), 0),
Addresses: msg.Addresses,
PubKey: msg.NodeID,
Alias: msg.Alias.String(),
AuthSig: msg.Signature,
Features: msg.Features,
}
if err := d.cfg.Router.AddNode(node); err != nil {
if routing.IsError(err, routing.ErrOutdated, routing.ErrIgnored) {
log.Debug(err)
} else {
log.Error(err)
}
nMsg.err <- err
return nil
}
// Node announcement was successfully proceeded and know it
// might be broadcast to other connected nodes.
announcements = append(announcements, msg)
nMsg.err <- nil
// TODO(roasbeef): get rid of the above
return announcements
// A new channel announcement has arrived, this indicates the
// *creation* of a new channel within the network. This only advertises
// the existence of a channel and not yet the routing policies in
// either direction of the channel.
case *lnwire.ChannelAnnouncement:
// If the advertised inclusionary block is beyond our knowledge
// of the chain tip, then we'll put the announcement in limbo
// to be fully verified once we advance forward in the chain.
if isPremature(msg.ShortChannelID, 0) {
blockHeight := msg.ShortChannelID.BlockHeight
log.Infof("Announcement for chan_id=(%v), is premature: "+
"advertises height %v, only height %v is known",
msg.ShortChannelID.ToUint64(),
msg.ShortChannelID.BlockHeight, d.bestHeight)
d.prematureAnnouncements[blockHeight] = append(
d.prematureAnnouncements[blockHeight],
nMsg,
)
return nil
}
// If this is a remote channel annoucement, then we'll validate
// all the signatues within the proof as it should be well
// formed.
var proof *channeldb.ChannelAuthProof
if nMsg.isRemote {
if err := d.validateChannelAnn(msg); err != nil {
err := errors.Errorf("unable to validate "+
"announcement: %v", err)
log.Error(err)
nMsg.err <- err
return nil
}
// If the proof checks out, then we'll save the proof
// itself to the database so we can fetch it later when
// gossiping with other nodes.
proof = &channeldb.ChannelAuthProof{
NodeSig1: msg.NodeSig1,
NodeSig2: msg.NodeSig2,
BitcoinSig1: msg.BitcoinSig1,
BitcoinSig2: msg.BitcoinSig2,
}
}
// With the proof validate (if necessary), we can now store it
// within the database for our path finding and syncing needs.
edge := &channeldb.ChannelEdgeInfo{
ChannelID: msg.ShortChannelID.ToUint64(),
NodeKey1: msg.NodeID1,
NodeKey2: msg.NodeID2,
BitcoinKey1: msg.BitcoinKey1,
BitcoinKey2: msg.BitcoinKey2,
AuthProof: proof,
}
if err := d.cfg.Router.AddEdge(edge); err != nil {
if routing.IsError(err, routing.ErrOutdated,
routing.ErrIgnored) {
log.Debug(err)
} else {
log.Error(err)
}
nMsg.err <- err
return nil
}
// Channel announcement was successfully proceeded and know it
// might be broadcast to other connected nodes if it was
// announcement with proof (remote).
if proof != nil {
announcements = append(announcements, msg)
}
nMsg.err <- nil
return announcements
// A new authenticated channel edge update has arrived. This indicates
// that the directional information for an already known channel has
// been updated.
case *lnwire.ChannelUpdate:
blockHeight := msg.ShortChannelID.BlockHeight
shortChanID := msg.ShortChannelID.ToUint64()
// If the advertised inclusionary block is beyond our knowledge
// of the chain tip, then we'll put the announcement in limbo
// to be fully verified once we advance forward in the chain.
if isPremature(msg.ShortChannelID, 0) {
log.Infof("Update announcement for "+
"short_chan_id(%v), is premature: advertises "+
"height %v, only height %v is known",
shortChanID, blockHeight, d.bestHeight)
d.prematureAnnouncements[blockHeight] = append(
d.prematureAnnouncements[blockHeight],
nMsg,
)
return nil
}
// Get the node pub key as far as we don't have it in channel
// update announcement message. We'll need this to properly
// verify message signature.
chanInfo, _, _, err := d.cfg.Router.GetChannelByID(msg.ShortChannelID)
if err != nil {
err := errors.Errorf("unable to validate "+
"channel update short_chan_id=%v: %v",
shortChanID, err)
nMsg.err <- err
return nil
}
// The flag on the channel update announcement tells us "which"
// side of the channels directed edge is being updated.
var pubKey *btcec.PublicKey
switch msg.Flags {
case 0:
pubKey = chanInfo.NodeKey1
case 1:
pubKey = chanInfo.NodeKey2
}
// Validate the channel announcement with the expected public
// key, In the case of an invalid channel , we'll return an
// error to the caller and exit early.
if err := d.validateChannelUpdateAnn(pubKey, msg); err != nil {
err := errors.Errorf("unable to validate channel "+
"update announcement for short_chan_id=%v: %v",
spew.Sdump(msg.ShortChannelID), err)
log.Error(err)
nMsg.err <- err
return nil
}
// TODO(roasbeef): should be msat here
update := &channeldb.ChannelEdgePolicy{
Signature: msg.Signature,
ChannelID: shortChanID,
LastUpdate: time.Unix(int64(msg.Timestamp), 0),
Flags: msg.Flags,
TimeLockDelta: msg.TimeLockDelta,
MinHTLC: btcutil.Amount(msg.HtlcMinimumMsat),
FeeBaseMSat: btcutil.Amount(msg.FeeBaseMsat),
FeeProportionalMillionths: btcutil.Amount(msg.FeeProportionalMillionths),
}
if err := d.cfg.Router.UpdateEdge(update); err != nil {
if routing.IsError(err, routing.ErrOutdated, routing.ErrIgnored) {
log.Debug(err)
} else {
log.Error(err)
}
nMsg.err <- err
return nil
}
// Channel update announcement was successfully processed and
// now it can be broadcast to the rest of the network. However,
// we'll only broadcast the channel update announcement if it
// has an attached authentication proof.
if chanInfo.AuthProof != nil {
announcements = append(announcements, msg)
}
nMsg.err <- nil
return announcements
// A new signature announcement has been received. This indicates
// willingness of nodes involved in the funding of a channel to
// announce this new channel to the rest of the world.
case *lnwire.AnnounceSignatures:
needBlockHeight := msg.ShortChannelID.BlockHeight + d.cfg.ProofMatureDelta
shortChanID := msg.ShortChannelID.ToUint64()
prefix := "local"
if nMsg.isRemote {
prefix = "remote"
}
log.Infof("Received new channel announcement: %v", spew.Sdump(msg))
// By the specification, channel announcement proofs should be
// sent after some number of confirmations after channel was
// registered in bitcoin blockchain. Therefore, we check if the
// proof is premature. If so we'll halt processing until the
// expected announcement height. This allows us to be tolerant
// to other clients if this constraint was changed.
if isPremature(msg.ShortChannelID, d.cfg.ProofMatureDelta) {
d.prematureAnnouncements[needBlockHeight] = append(
d.prematureAnnouncements[needBlockHeight],
nMsg,
)
log.Infof("Premature proof announcement, "+
"current block height lower than needed: %v <"+
" %v, add announcement to reprocessing batch",
d.bestHeight, needBlockHeight)
return nil
}
// Ensure that we know of a channel with the target channel ID
// before proceeding further.
chanInfo, e1, e2, err := d.cfg.Router.GetChannelByID(msg.ShortChannelID)
if err != nil {
err := errors.Errorf("unable to process channel "+
"%v proof with short_chan_id=%v: %v", prefix,
shortChanID, err)
nMsg.err <- err
return nil
}
isFirstNode := bytes.Equal(nMsg.peer.SerializeCompressed(),
chanInfo.NodeKey1.SerializeCompressed())
isSecondNode := bytes.Equal(nMsg.peer.SerializeCompressed(),
chanInfo.NodeKey2.SerializeCompressed())
// Ensure that channel that was retrieved belongs to the peer
// which sent the proof announcement.
if !(isFirstNode || isSecondNode) {
err := errors.Errorf("channel that was received not "+
"belongs to the peer which sent the proof, "+
"short_chan_id=%v", shortChanID)
log.Error(err)
nMsg.err <- err
return nil
}
// Check that we received the opposite proof. If so, then we're
// now able to construct the full proof, and create the channel
// announcement. If we didn't receive the opposite half of the
// proof than we should store it this one, and wait for
// opposite to be received.
oppositeKey := newProofKey(chanInfo.ChannelID, !nMsg.isRemote)
oppositeProof, ok := d.waitingProofs[oppositeKey]
if !ok {
key := newProofKey(chanInfo.ChannelID, nMsg.isRemote)
d.waitingProofs[key] = msg
// If proof was sent by a local sub-system, then we'll
// send the announcement signature to the remote node
// so they can also reconstruct the full channel
// announcement.
if !nMsg.isRemote {
// Check that first node of the channel info
// corresponds to us.
var remotePeer *btcec.PublicKey
if isFirstNode {
remotePeer = chanInfo.NodeKey2
} else {
remotePeer = chanInfo.NodeKey1
}
err := d.cfg.SendToPeer(remotePeer, msg)
if err != nil {
log.Errorf("unable to send "+
"announcement message to peer: %x",
remotePeer.SerializeCompressed())
}
log.Infof("Sent channel announcement proof "+
"for short_chan_id=%v to remote peer: "+
"%x", shortChanID,
remotePeer.SerializeCompressed())
}
log.Infof("1/2 of channel ann proof received for "+
"short_chan_id=%v, waiting for other half",
shortChanID)
nMsg.err <- nil
return nil
}
// If we now have both halves of the channel announcement
// proof, then we'll reconstruct the initial announcement so we
// can validate it shortly below.
var dbProof channeldb.ChannelAuthProof
if isFirstNode {
dbProof.NodeSig1 = msg.NodeSignature
dbProof.NodeSig2 = oppositeProof.NodeSignature
dbProof.BitcoinSig1 = msg.BitcoinSignature
dbProof.BitcoinSig2 = oppositeProof.BitcoinSignature
} else {
dbProof.NodeSig1 = oppositeProof.NodeSignature
dbProof.NodeSig2 = msg.NodeSignature
dbProof.BitcoinSig1 = oppositeProof.BitcoinSignature
dbProof.BitcoinSig2 = msg.BitcoinSignature
}
chanAnn, e1Ann, e2Ann := createChanAnnouncement(&dbProof, chanInfo, e1, e2)
// With all the necessary components assembled validate the
// full channel announcement proof.
if err := d.validateChannelAnn(chanAnn); err != nil {
err := errors.Errorf("channel announcement proof "+
"for short_chan_id=%v isn't valid: %v",
shortChanID, err)
log.Error(err)
nMsg.err <- err
return nil
}
// If the channel was returned by the router it means that
// existence of funding point and inclusion of nodes bitcoin
// keys in it already checked by the router. In this stage we
// should check that node keys are attest to the bitcoin keys
// by validating the signatures of announcement. If proof is
// valid then we'll populate the channel edge with it, so we
// can announce it on peer connect.
err = d.cfg.Router.AddProof(msg.ShortChannelID, &dbProof)
if err != nil {
err := errors.Errorf("unable add proof to the "+
"channel chanID=%v: %v", msg.ChannelID, err)
log.Error(err)
nMsg.err <- err
return nil
}
// Proof was successfully created and now can announce the
// channel to the remain network.
log.Infof("Fully valid channel proof for short_chan_id=%v "+
"constructed, adding to next ann batch",
shortChanID)
// Assemble the necessary announcements to add to the next
// broadcasting batch.
announcements = append(announcements, chanAnn)
if e1Ann != nil {
announcements = append(announcements, e1Ann)
}
if e2Ann != nil {
announcements = append(announcements, e2Ann)
}
// If this a local announcement, then we'll send it to the
// remote side so they can reconstruct the full channel
// announcement proof.
if !nMsg.isRemote {
var remotePeer *btcec.PublicKey
if isFirstNode {
remotePeer = chanInfo.NodeKey2
} else {
remotePeer = chanInfo.NodeKey1
}
if err = d.cfg.SendToPeer(remotePeer, msg); err != nil {
log.Errorf("unable to send announcement "+
"message to peer: %x",
remotePeer.SerializeCompressed())
}
}
nMsg.err <- nil
return announcements
default:
nMsg.err <- errors.New("wrong type of the announcement")
return nil
}
}
// synchronizeWithNode attempts to synchronize the target node in the syncReq
// to the latest channel graph state. In order to accomplish this, (currently)
// the entire network graph is read from disk, then serialized to the format
// defined within the current wire protocol. This cache of graph data is then
// sent directly to the target node.
func (d *AuthenticatedGossiper) synchronizeWithNode(syncReq *syncRequest) error {
targetNode := syncReq.node
// TODO(roasbeef): need to also store sig data in db
// * will be nice when we switch to pairing sigs would only need one ^_^
// We'll collate all the gathered routing messages into a single slice
// containing all the messages to be sent to the target peer.
var announceMessages []lnwire.Message
// First run through all the vertexes in the graph, retrieving the data
// for the announcement we originally retrieved.
var numNodes uint32
if err := d.cfg.Router.ForEachNode(func(node *channeldb.LightningNode) error {
ann := &lnwire.NodeAnnouncement{
Signature: node.AuthSig,
Timestamp: uint32(node.LastUpdate.Unix()),
Addresses: node.Addresses,
NodeID: node.PubKey,
Alias: lnwire.NewAlias(node.Alias),
Features: node.Features,
}
announceMessages = append(announceMessages, ann)
numNodes++
return nil
}); err != nil {
return err
}
// With the vertexes gathered, we'll no retrieve the initial
// announcement, as well as the latest channel update announcement for
// both of the directed infos that make up the channel.
var numEdges uint32
if err := d.cfg.Router.ForEachChannel(func(chanInfo *channeldb.ChannelEdgeInfo,
e1, e2 *channeldb.ChannelEdgePolicy) error {
// First, using the parameters of the channel, along with the
// channel authentication proof, we'll create re-create the
// original authenticated channel announcement.
if chanInfo.AuthProof != nil {
chanAnn, e1Ann, e2Ann := createChanAnnouncement(
chanInfo.AuthProof, chanInfo, e1, e2)
announceMessages = append(announceMessages, chanAnn)
if e1Ann != nil {
announceMessages = append(announceMessages, e1Ann)
}
if e2Ann != nil {
announceMessages = append(announceMessages, e2Ann)
}
numEdges++
}
return nil
}); err != nil && err != channeldb.ErrGraphNoEdgesFound {
log.Errorf("unable to sync infos with peer: %v", err)
return err
}
log.Infof("Syncing channel graph state with %x, sending %v "+
"vertexes and %v edges", targetNode.SerializeCompressed(),
numNodes, numEdges)
// With all the announcement messages gathered, send them all in a
// single batch to the target peer.
return d.cfg.SendToPeer(targetNode, announceMessages...)
}