package invoices import ( "bytes" "errors" "fmt" "sync" "sync/atomic" "time" "github.com/btcsuite/btcutil" "github.com/davecgh/go-spew/spew" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/lntypes" "github.com/lightningnetwork/lnd/lnwire" "github.com/lightningnetwork/lnd/queue" ) var ( // DebugPre is the default debug preimage which is inserted into the // invoice registry if the --debughtlc flag is activated on start up. // All nodes initialized with the flag active will immediately settle // any incoming HTLC whose rHash corresponds with the debug // preimage. DebugPre, _ = lntypes.MakePreimage(bytes.Repeat([]byte{1}, 32)) // DebugHash is the hash of the default preimage. DebugHash = DebugPre.Hash() ) var ( // ErrInvoiceExpiryTooSoon is returned when an invoice is attempted to be // accepted or settled with not enough blocks remaining. ErrInvoiceExpiryTooSoon = errors.New("invoice expiry too soon") // ErrInvoiceAmountTooLow is returned when an invoice is attempted to be // accepted or settled with an amount that is too low. ErrInvoiceAmountTooLow = errors.New("paid amount less than invoice amount") // ErrShuttingDown is returned when an operation failed because the // invoice registry is shutting down. ErrShuttingDown = errors.New("invoice registry shutting down") ) // HodlEvent describes how an htlc should be resolved. If HodlEvent.Preimage is // set, the event indicates a settle event. If Preimage is nil, it is a cancel // event. type HodlEvent struct { // Preimage is the htlc preimage. Its value is nil in case of a cancel. Preimage *lntypes.Preimage // Hash is the htlc hash. Hash lntypes.Hash } // InvoiceRegistry is a central registry of all the outstanding invoices // created by the daemon. The registry is a thin wrapper around a map in order // to ensure that all updates/reads are thread safe. type InvoiceRegistry struct { sync.RWMutex cdb *channeldb.DB clientMtx sync.Mutex nextClientID uint32 notificationClients map[uint32]*InvoiceSubscription singleNotificationClients map[uint32]*SingleInvoiceSubscription newSubscriptions chan *InvoiceSubscription subscriptionCancels chan uint32 // invoiceEvents is a single channel over which both invoice updates and // new single invoice subscriptions are carried. invoiceEvents chan interface{} // debugInvoices is a map which stores special "debug" invoices which // should be only created/used when manual tests require an invoice // that *all* nodes are able to fully settle. debugInvoices map[lntypes.Hash]*channeldb.Invoice // decodeFinalCltvExpiry is a function used to decode the final expiry // value from the payment request. decodeFinalCltvExpiry func(invoice string) (uint32, error) // subscriptions is a map from a payment hash to a list of subscribers. // It is used for efficient notification of links. hodlSubscriptions map[lntypes.Hash]map[chan<- interface{}]struct{} // reverseSubscriptions tracks hashes subscribed to per subscriber. This // is used to unsubscribe from all hashes efficiently. hodlReverseSubscriptions map[chan<- interface{}]map[lntypes.Hash]struct{} // finalCltvRejectDelta defines the number of blocks before the expiry // of the htlc where we no longer settle it as an exit hop and instead // cancel it back. Normally this value should be lower than the cltv // expiry of any invoice we create and the code effectuating this should // not be hit. finalCltvRejectDelta int32 wg sync.WaitGroup quit chan struct{} } // NewRegistry creates a new invoice registry. The invoice registry // wraps the persistent on-disk invoice storage with an additional in-memory // layer. The in-memory layer is in place such that debug invoices can be added // which are volatile yet available system wide within the daemon. func NewRegistry(cdb *channeldb.DB, decodeFinalCltvExpiry func(invoice string) ( uint32, error), finalCltvRejectDelta int32) *InvoiceRegistry { return &InvoiceRegistry{ cdb: cdb, debugInvoices: make(map[lntypes.Hash]*channeldb.Invoice), notificationClients: make(map[uint32]*InvoiceSubscription), singleNotificationClients: make(map[uint32]*SingleInvoiceSubscription), newSubscriptions: make(chan *InvoiceSubscription), subscriptionCancels: make(chan uint32), invoiceEvents: make(chan interface{}, 100), hodlSubscriptions: make(map[lntypes.Hash]map[chan<- interface{}]struct{}), hodlReverseSubscriptions: make(map[chan<- interface{}]map[lntypes.Hash]struct{}), decodeFinalCltvExpiry: decodeFinalCltvExpiry, finalCltvRejectDelta: finalCltvRejectDelta, quit: make(chan struct{}), } } // Start starts the registry and all goroutines it needs to carry out its task. func (i *InvoiceRegistry) Start() error { i.wg.Add(1) go i.invoiceEventNotifier() return nil } // Stop signals the registry for a graceful shutdown. func (i *InvoiceRegistry) Stop() { close(i.quit) i.wg.Wait() } // invoiceEvent represents a new event that has modified on invoice on disk. // Only two event types are currently supported: newly created invoices, and // instance where invoices are settled. type invoiceEvent struct { hash lntypes.Hash invoice *channeldb.Invoice } // invoiceEventNotifier is the dedicated goroutine responsible for accepting // new notification subscriptions, cancelling old subscriptions, and // dispatching new invoice events. func (i *InvoiceRegistry) invoiceEventNotifier() { defer i.wg.Done() for { select { // A new invoice subscription for all invoices has just arrived! // We'll query for any backlog notifications, then add it to the // set of clients. case newClient := <-i.newSubscriptions: // Before we add the client to our set of active // clients, we'll first attempt to deliver any backlog // invoice events. err := i.deliverBacklogEvents(newClient) if err != nil { log.Errorf("unable to deliver backlog invoice "+ "notifications: %v", err) } log.Infof("New invoice subscription "+ "client: id=%v", newClient.id) // With the backlog notifications delivered (if any), // we'll add this to our active subscriptions and // continue. i.notificationClients[newClient.id] = newClient // A client no longer wishes to receive invoice notifications. // So we'll remove them from the set of active clients. case clientID := <-i.subscriptionCancels: log.Infof("Cancelling invoice subscription for "+ "client=%v", clientID) delete(i.notificationClients, clientID) delete(i.singleNotificationClients, clientID) // An invoice event has come in. This can either be an update to // an invoice or a new single invoice subscriber. Both type of // events are passed in via the same channel, to make sure that // subscribers get a consistent view of the event sequence. case event := <-i.invoiceEvents: switch e := event.(type) { // A sub-systems has just modified the invoice state, so // we'll dispatch notifications to all registered // clients. case *invoiceEvent: // For backwards compatibility, do not notify // all invoice subscribers of cancel and accept // events. state := e.invoice.Terms.State if state != channeldb.ContractCanceled && state != channeldb.ContractAccepted { i.dispatchToClients(e) } i.dispatchToSingleClients(e) // A new single invoice subscription has arrived. Add it // to the set of clients. It is important to do this in // sequence with any other invoice events, because an // initial invoice update has already been sent out to // the subscriber. case *SingleInvoiceSubscription: log.Infof("New single invoice subscription "+ "client: id=%v, hash=%v", e.id, e.hash) i.singleNotificationClients[e.id] = e } case <-i.quit: return } } } // dispatchToSingleClients passes the supplied event to all notification clients // that subscribed to all the invoice this event applies to. func (i *InvoiceRegistry) dispatchToSingleClients(event *invoiceEvent) { // Dispatch to single invoice subscribers. for _, client := range i.singleNotificationClients { if client.hash != event.hash { continue } client.notify(event) } } // dispatchToClients passes the supplied event to all notification clients that // subscribed to all invoices. Add and settle indices are used to make sure that // clients don't receive duplicate or unwanted events. func (i *InvoiceRegistry) dispatchToClients(event *invoiceEvent) { invoice := event.invoice for clientID, client := range i.notificationClients { // Before we dispatch this event, we'll check // to ensure that this client hasn't already // received this notification in order to // ensure we don't duplicate any events. // TODO(joostjager): Refactor switches. state := event.invoice.Terms.State switch { // If we've already sent this settle event to // the client, then we can skip this. case state == channeldb.ContractSettled && client.settleIndex >= invoice.SettleIndex: continue // Similarly, if we've already sent this add to // the client then we can skip this one. case state == channeldb.ContractOpen && client.addIndex >= invoice.AddIndex: continue // These two states should never happen, but we // log them just in case so we can detect this // instance. case state == channeldb.ContractOpen && client.addIndex+1 != invoice.AddIndex: log.Warnf("client=%v for invoice "+ "notifications missed an update, "+ "add_index=%v, new add event index=%v", clientID, client.addIndex, invoice.AddIndex) case state == channeldb.ContractSettled && client.settleIndex+1 != invoice.SettleIndex: log.Warnf("client=%v for invoice "+ "notifications missed an update, "+ "settle_index=%v, new settle event index=%v", clientID, client.settleIndex, invoice.SettleIndex) } select { case client.ntfnQueue.ChanIn() <- &invoiceEvent{ invoice: invoice, }: case <-i.quit: return } // Each time we send a notification to a client, we'll record // the latest add/settle index it has. We'll use this to ensure // we don't send a notification twice, which can happen if a new // event is added while we're catching up a new client. switch event.invoice.Terms.State { case channeldb.ContractSettled: client.settleIndex = invoice.SettleIndex case channeldb.ContractOpen: client.addIndex = invoice.AddIndex default: log.Errorf("unexpected invoice state: %v", event.invoice.Terms.State) } } } // deliverBacklogEvents will attempts to query the invoice database for any // notifications that the client has missed since it reconnected last. func (i *InvoiceRegistry) deliverBacklogEvents(client *InvoiceSubscription) error { // First, we'll query the database to see if based on the provided // addIndex and settledIndex we need to deliver any backlog // notifications. addEvents, err := i.cdb.InvoicesAddedSince(client.addIndex) if err != nil { return err } settleEvents, err := i.cdb.InvoicesSettledSince(client.settleIndex) if err != nil { return err } // If we have any to deliver, then we'll append them to the end of the // notification queue in order to catch up the client before delivering // any new notifications. for _, addEvent := range addEvents { // We re-bind the loop variable to ensure we don't hold onto // the loop reference causing is to point to the same item. addEvent := addEvent select { case client.ntfnQueue.ChanIn() <- &invoiceEvent{ invoice: &addEvent, }: case <-i.quit: return ErrShuttingDown } } for _, settleEvent := range settleEvents { // We re-bind the loop variable to ensure we don't hold onto // the loop reference causing is to point to the same item. settleEvent := settleEvent select { case client.ntfnQueue.ChanIn() <- &invoiceEvent{ invoice: &settleEvent, }: case <-i.quit: return ErrShuttingDown } } return nil } // deliverSingleBacklogEvents will attempt to query the invoice database to // retrieve the current invoice state and deliver this to the subscriber. Single // invoice subscribers will always receive the current state right after // subscribing. Only in case the invoice does not yet exist, nothing is sent // yet. func (i *InvoiceRegistry) deliverSingleBacklogEvents( client *SingleInvoiceSubscription) error { invoice, err := i.cdb.LookupInvoice(client.hash) // It is possible that the invoice does not exist yet, but the client is // already watching it in anticipation. if err == channeldb.ErrInvoiceNotFound || err == channeldb.ErrNoInvoicesCreated { return nil } if err != nil { return err } err = client.notify(&invoiceEvent{ hash: client.hash, invoice: &invoice, }) if err != nil { return err } return nil } // AddDebugInvoice adds a debug invoice for the specified amount, identified // by the passed preimage. Once this invoice is added, subsystems within the // daemon add/forward HTLCs that are able to obtain the proper preimage // required for redemption in the case that we're the final destination. func (i *InvoiceRegistry) AddDebugInvoice(amt btcutil.Amount, preimage lntypes.Preimage) { paymentHash := preimage.Hash() invoice := &channeldb.Invoice{ CreationDate: time.Now(), Terms: channeldb.ContractTerm{ Value: lnwire.NewMSatFromSatoshis(amt), PaymentPreimage: preimage, }, } i.Lock() i.debugInvoices[paymentHash] = invoice i.Unlock() log.Debugf("Adding debug invoice %v", newLogClosure(func() string { return spew.Sdump(invoice) })) } // AddInvoice adds a regular invoice for the specified amount, identified by // the passed preimage. Additionally, any memo or receipt data provided will // also be stored on-disk. Once this invoice is added, subsystems within the // daemon add/forward HTLCs are able to obtain the proper preimage required for // redemption in the case that we're the final destination. We also return the // addIndex of the newly created invoice which monotonically increases for each // new invoice added. A side effect of this function is that it also sets // AddIndex on the invoice argument. func (i *InvoiceRegistry) AddInvoice(invoice *channeldb.Invoice, paymentHash lntypes.Hash) (uint64, error) { i.Lock() defer i.Unlock() log.Debugf("Invoice(%v): added %v", paymentHash, newLogClosure(func() string { return spew.Sdump(invoice) }), ) addIndex, err := i.cdb.AddInvoice(invoice, paymentHash) if err != nil { return 0, err } // Now that we've added the invoice, we'll send dispatch a message to // notify the clients of this new invoice. i.notifyClients(paymentHash, invoice, channeldb.ContractOpen) return addIndex, nil } // LookupInvoice looks up an invoice by its payment hash (R-Hash), if found // then we're able to pull the funds pending within an HTLC. We'll also return // what the expected min final CLTV delta is, pre-parsed from the payment // request. This may be used by callers to determine if an HTLC is well formed // according to the cltv delta. // // TODO(roasbeef): ignore if settled? func (i *InvoiceRegistry) LookupInvoice(rHash lntypes.Hash) (channeldb.Invoice, uint32, error) { // First check the in-memory debug invoice index to see if this is an // existing invoice added for debugging. i.RLock() debugInv, ok := i.debugInvoices[rHash] i.RUnlock() // If found, then simply return the invoice directly. if ok { return *debugInv, 0, nil } // Otherwise, we'll check the database to see if there's an existing // matching invoice. invoice, err := i.cdb.LookupInvoice(rHash) if err != nil { return channeldb.Invoice{}, 0, err } expiry, err := i.decodeFinalCltvExpiry(string(invoice.PaymentRequest)) if err != nil { return channeldb.Invoice{}, 0, err } return invoice, expiry, nil } // checkHtlcParameters is a callback used inside invoice db transactions to // atomically check-and-update an invoice. func (i *InvoiceRegistry) checkHtlcParameters(invoice *channeldb.Invoice, amtPaid lnwire.MilliSatoshi, htlcExpiry uint32, currentHeight int32) error { // If the invoice is already canceled, there is no further checking to // do. if invoice.Terms.State == channeldb.ContractCanceled { return channeldb.ErrInvoiceAlreadyCanceled } // If a payment has already been made, we only accept more payments if // the amount is the exact same. This prevents probing with small // amounts on settled invoices to find out the receiver node. if invoice.AmtPaid != 0 && amtPaid != invoice.AmtPaid { return ErrInvoiceAmountTooLow } // Return early in case the invoice was already accepted or settled. We // don't want to check the expiry again, because it may be that we are // just restarting. switch invoice.Terms.State { case channeldb.ContractAccepted: return channeldb.ErrInvoiceAlreadyAccepted case channeldb.ContractSettled: return channeldb.ErrInvoiceAlreadySettled } // The invoice is still open. Check the expiry. expiry, err := i.decodeFinalCltvExpiry(string(invoice.PaymentRequest)) if err != nil { return err } if htlcExpiry < uint32(currentHeight+i.finalCltvRejectDelta) { return ErrInvoiceExpiryTooSoon } if htlcExpiry < uint32(currentHeight)+expiry { return ErrInvoiceExpiryTooSoon } // If an invoice amount is specified, check that enough is paid. if invoice.Terms.Value > 0 && amtPaid < invoice.Terms.Value { return ErrInvoiceAmountTooLow } return nil } // NotifyExitHopHtlc attempts to mark an invoice as settled. If the invoice is a // debug invoice, then this method is a noop as debug invoices are never fully // settled. The return value describes how the htlc should be resolved. // // When the preimage of the invoice is not yet known (hodl invoice), this // function moves the invoice to the accepted state. When SettleHoldInvoice is // called later, a resolution message will be send back to the caller via the // provided hodlChan. Invoice registry sends on this channel what action needs // to be taken on the htlc (settle or cancel). The caller needs to ensure that // the channel is either buffered or received on from another goroutine to // prevent deadlock. func (i *InvoiceRegistry) NotifyExitHopHtlc(rHash lntypes.Hash, amtPaid lnwire.MilliSatoshi, expiry uint32, currentHeight int32, hodlChan chan<- interface{}) (*HodlEvent, error) { i.Lock() defer i.Unlock() debugLog := func(s string) { log.Debugf("Invoice(%x): %v, amt=%v, expiry=%v", rHash[:], s, amtPaid, expiry) } // First check the in-memory debug invoice index to see if this is an // existing invoice added for debugging. if invoice, ok := i.debugInvoices[rHash]; ok { debugLog("payment to debug invoice accepted") // Debug invoices are never fully settled, so we just settle the // htlc in this case. return &HodlEvent{ Hash: rHash, Preimage: &invoice.Terms.PaymentPreimage, }, nil } // If this isn't a debug invoice, then we'll attempt to settle an // invoice matching this rHash on disk (if one exists). invoice, err := i.cdb.AcceptOrSettleInvoice( rHash, amtPaid, func(inv *channeldb.Invoice) error { return i.checkHtlcParameters( inv, amtPaid, expiry, currentHeight, ) }, ) switch err { // If invoice is already settled, settle htlc. This means we accept more // payments to the same invoice hash. // // NOTE: Though our recovery and forwarding logic is predominately // batched, settling invoices happens iteratively. We may reject one of // two payments for the same rhash at first, but then restart and reject // both after seeing that the invoice has been settled. Without any // record of which one settles first, it is ambiguous as to which one // actually settled the invoice. Thus, by accepting all payments, we // eliminate the race condition that can lead to this inconsistency. // // TODO(conner): track ownership of settlements to properly recover from // failures? or add batch invoice settlement case channeldb.ErrInvoiceAlreadySettled: debugLog("accepting duplicate payment to settled invoice") return &HodlEvent{ Hash: rHash, Preimage: &invoice.Terms.PaymentPreimage, }, nil // If invoice is already canceled, cancel htlc. case channeldb.ErrInvoiceAlreadyCanceled: debugLog("invoice already canceled") return &HodlEvent{ Hash: rHash, }, nil // If invoice is already accepted, add this htlc to the list of // subscribers. case channeldb.ErrInvoiceAlreadyAccepted: debugLog("accepting duplicate payment to accepted invoice") i.hodlSubscribe(hodlChan, rHash) return nil, nil // If there are not enough blocks left, cancel the htlc. case ErrInvoiceExpiryTooSoon: debugLog("expiry too soon") return &HodlEvent{ Hash: rHash, }, nil // If there are not enough blocks left, cancel the htlc. case ErrInvoiceAmountTooLow: debugLog("amount too low") return &HodlEvent{ Hash: rHash, }, nil // If this call settled the invoice, settle the htlc. Otherwise // subscribe for a future hodl event. case nil: i.notifyClients(rHash, invoice, invoice.Terms.State) switch invoice.Terms.State { case channeldb.ContractSettled: debugLog("settled") return &HodlEvent{ Hash: rHash, Preimage: &invoice.Terms.PaymentPreimage, }, nil case channeldb.ContractAccepted: debugLog("accepted") // Subscribe to updates to this invoice. i.hodlSubscribe(hodlChan, rHash) return nil, nil default: return nil, fmt.Errorf("unexpected invoice state %v", invoice.Terms.State) } default: debugLog(err.Error()) return nil, err } } // SettleHodlInvoice sets the preimage of a hodl invoice. func (i *InvoiceRegistry) SettleHodlInvoice(preimage lntypes.Preimage) error { i.Lock() defer i.Unlock() invoice, err := i.cdb.SettleHoldInvoice(preimage) if err != nil { log.Errorf("SettleHodlInvoice with preimage %v: %v", preimage, err) return err } hash := preimage.Hash() log.Debugf("Invoice(%v): settled with preimage %v", hash, invoice.Terms.PaymentPreimage) i.notifyHodlSubscribers(HodlEvent{ Hash: hash, Preimage: &preimage, }) i.notifyClients(hash, invoice, invoice.Terms.State) return nil } // CancelInvoice attempts to cancel the invoice corresponding to the passed // payment hash. func (i *InvoiceRegistry) CancelInvoice(payHash lntypes.Hash) error { i.Lock() defer i.Unlock() log.Debugf("Invoice(%v): canceling invoice", payHash) invoice, err := i.cdb.CancelInvoice(payHash) // Implement idempotency by returning success if the invoice was already // canceled. if err == channeldb.ErrInvoiceAlreadyCanceled { log.Debugf("Invoice(%v): already canceled", payHash) return nil } if err != nil { return err } log.Debugf("Invoice(%v): canceled", payHash) i.notifyHodlSubscribers(HodlEvent{ Hash: payHash, }) i.notifyClients(payHash, invoice, channeldb.ContractCanceled) return nil } // notifyClients notifies all currently registered invoice notification clients // of a newly added/settled invoice. func (i *InvoiceRegistry) notifyClients(hash lntypes.Hash, invoice *channeldb.Invoice, state channeldb.ContractState) { event := &invoiceEvent{ invoice: invoice, hash: hash, } select { case i.invoiceEvents <- event: case <-i.quit: } } // invoiceSubscriptionKit defines that are common to both all invoice // subscribers and single invoice subscribers. type invoiceSubscriptionKit struct { id uint32 inv *InvoiceRegistry ntfnQueue *queue.ConcurrentQueue cancelled uint32 // To be used atomically. cancelChan chan struct{} wg sync.WaitGroup } // InvoiceSubscription represents an intent to receive updates for newly added // or settled invoices. For each newly added invoice, a copy of the invoice // will be sent over the NewInvoices channel. Similarly, for each newly settled // invoice, a copy of the invoice will be sent over the SettledInvoices // channel. type InvoiceSubscription struct { invoiceSubscriptionKit // NewInvoices is a channel that we'll use to send all newly created // invoices with an invoice index greater than the specified // StartingInvoiceIndex field. NewInvoices chan *channeldb.Invoice // SettledInvoices is a channel that we'll use to send all setted // invoices with an invoices index greater than the specified // StartingInvoiceIndex field. SettledInvoices chan *channeldb.Invoice // addIndex is the highest add index the caller knows of. We'll use // this information to send out an event backlog to the notifications // subscriber. Any new add events with an index greater than this will // be dispatched before any new notifications are sent out. addIndex uint64 // settleIndex is the highest settle index the caller knows of. We'll // use this information to send out an event backlog to the // notifications subscriber. Any new settle events with an index // greater than this will be dispatched before any new notifications // are sent out. settleIndex uint64 } // SingleInvoiceSubscription represents an intent to receive updates for a // specific invoice. type SingleInvoiceSubscription struct { invoiceSubscriptionKit hash lntypes.Hash // Updates is a channel that we'll use to send all invoice events for // the invoice that is subscribed to. Updates chan *channeldb.Invoice } // Cancel unregisters the InvoiceSubscription, freeing any previously allocated // resources. func (i *invoiceSubscriptionKit) Cancel() { if !atomic.CompareAndSwapUint32(&i.cancelled, 0, 1) { return } select { case i.inv.subscriptionCancels <- i.id: case <-i.inv.quit: } i.ntfnQueue.Stop() close(i.cancelChan) i.wg.Wait() } func (i *invoiceSubscriptionKit) notify(event *invoiceEvent) error { select { case i.ntfnQueue.ChanIn() <- event: case <-i.inv.quit: return ErrShuttingDown } return nil } // SubscribeNotifications returns an InvoiceSubscription which allows the // caller to receive async notifications when any invoices are settled or // added. The invoiceIndex parameter is a streaming "checkpoint". We'll start // by first sending out all new events with an invoice index _greater_ than // this value. Afterwards, we'll send out real-time notifications. func (i *InvoiceRegistry) SubscribeNotifications(addIndex, settleIndex uint64) *InvoiceSubscription { client := &InvoiceSubscription{ NewInvoices: make(chan *channeldb.Invoice), SettledInvoices: make(chan *channeldb.Invoice), addIndex: addIndex, settleIndex: settleIndex, invoiceSubscriptionKit: invoiceSubscriptionKit{ inv: i, ntfnQueue: queue.NewConcurrentQueue(20), cancelChan: make(chan struct{}), }, } client.ntfnQueue.Start() i.clientMtx.Lock() client.id = i.nextClientID i.nextClientID++ i.clientMtx.Unlock() // Before we register this new invoice subscription, we'll launch a new // goroutine that will proxy all notifications appended to the end of // the concurrent queue to the two client-side channels the caller will // feed off of. i.wg.Add(1) go func() { defer i.wg.Done() for { select { // A new invoice event has been sent by the // invoiceRegistry! We'll figure out if this is an add // event or a settle event, then dispatch the event to // the client. case ntfn := <-client.ntfnQueue.ChanOut(): invoiceEvent := ntfn.(*invoiceEvent) var targetChan chan *channeldb.Invoice state := invoiceEvent.invoice.Terms.State switch state { case channeldb.ContractOpen: targetChan = client.NewInvoices case channeldb.ContractSettled: targetChan = client.SettledInvoices default: log.Errorf("unknown invoice "+ "state: %v", state) continue } select { case targetChan <- invoiceEvent.invoice: case <-client.cancelChan: return case <-i.quit: return } case <-client.cancelChan: return case <-i.quit: return } } }() select { case i.newSubscriptions <- client: case <-i.quit: } return client } // SubscribeSingleInvoice returns an SingleInvoiceSubscription which allows the // caller to receive async notifications for a specific invoice. func (i *InvoiceRegistry) SubscribeSingleInvoice( hash lntypes.Hash) (*SingleInvoiceSubscription, error) { client := &SingleInvoiceSubscription{ Updates: make(chan *channeldb.Invoice), invoiceSubscriptionKit: invoiceSubscriptionKit{ inv: i, ntfnQueue: queue.NewConcurrentQueue(20), cancelChan: make(chan struct{}), }, hash: hash, } client.ntfnQueue.Start() i.clientMtx.Lock() client.id = i.nextClientID i.nextClientID++ i.clientMtx.Unlock() // Before we register this new invoice subscription, we'll launch a new // goroutine that will proxy all notifications appended to the end of // the concurrent queue to the two client-side channels the caller will // feed off of. i.wg.Add(1) go func() { defer i.wg.Done() for { select { // A new invoice event has been sent by the // invoiceRegistry. We will dispatch the event to the // client. case ntfn := <-client.ntfnQueue.ChanOut(): invoiceEvent := ntfn.(*invoiceEvent) select { case client.Updates <- invoiceEvent.invoice: case <-client.cancelChan: return case <-i.quit: return } case <-client.cancelChan: return case <-i.quit: return } } }() // Within the lock, we both query the invoice state and pass the client // subscription to the invoiceEvents channel. This is to make sure that // the client receives a consistent stream of events. i.Lock() defer i.Unlock() err := i.deliverSingleBacklogEvents(client) if err != nil { return nil, err } select { case i.invoiceEvents <- client: case <-i.quit: return nil, ErrShuttingDown } return client, nil } // notifyHodlSubscribers sends out the hodl event to all current subscribers. func (i *InvoiceRegistry) notifyHodlSubscribers(hodlEvent HodlEvent) { subscribers, ok := i.hodlSubscriptions[hodlEvent.Hash] if !ok { return } // Notify all interested subscribers and remove subscription from both // maps. The subscription can be removed as there only ever will be a // single resolution for each hash. for subscriber := range subscribers { select { case subscriber <- hodlEvent: case <-i.quit: return } delete(i.hodlReverseSubscriptions[subscriber], hodlEvent.Hash) } delete(i.hodlSubscriptions, hodlEvent.Hash) } // hodlSubscribe adds a new invoice subscription. func (i *InvoiceRegistry) hodlSubscribe(subscriber chan<- interface{}, hash lntypes.Hash) { log.Debugf("Hodl subscribe for %v", hash) subscriptions, ok := i.hodlSubscriptions[hash] if !ok { subscriptions = make(map[chan<- interface{}]struct{}) i.hodlSubscriptions[hash] = subscriptions } subscriptions[subscriber] = struct{}{} reverseSubscriptions, ok := i.hodlReverseSubscriptions[subscriber] if !ok { reverseSubscriptions = make(map[lntypes.Hash]struct{}) i.hodlReverseSubscriptions[subscriber] = reverseSubscriptions } reverseSubscriptions[hash] = struct{}{} } // HodlUnsubscribeAll cancels the subscription. func (i *InvoiceRegistry) HodlUnsubscribeAll(subscriber chan<- interface{}) { i.Lock() defer i.Unlock() hashes := i.hodlReverseSubscriptions[subscriber] for hash := range hashes { delete(i.hodlSubscriptions[hash], subscriber) } delete(i.hodlReverseSubscriptions, subscriber) }