package contractcourt

import (
	"encoding/binary"
	"fmt"
	"io"
	"sync"

	"github.com/btcsuite/btcd/txscript"
	"github.com/btcsuite/btcd/wire"
	"github.com/btcsuite/btcutil"
	"github.com/lightningnetwork/lnd/input"
	"github.com/lightningnetwork/lnd/lnwallet"
	"github.com/lightningnetwork/lnd/sweep"
)

const (
	// commitOutputConfTarget is the default confirmation target we'll use
	// for sweeps of commit outputs that belong to us.
	commitOutputConfTarget = 6
)

// commitSweepResolver is a resolver that will attempt to sweep the commitment
// output paying to us, in the case that the remote party broadcasts their
// version of the commitment transaction. We can sweep this output immediately,
// as it doesn't have a time-lock delay.
type commitSweepResolver struct {
	// commitResolution contains all data required to successfully sweep
	// this HTLC on-chain.
	commitResolution lnwallet.CommitOutputResolution

	// resolved reflects if the contract has been fully resolved or not.
	resolved bool

	// broadcastHeight is the height that the original contract was
	// broadcast to the main-chain at. We'll use this value to bound any
	// historical queries to the chain for spends/confirmations.
	broadcastHeight uint32

	// chanPoint is the channel point of the original contract.
	chanPoint wire.OutPoint

	// currentReport stores the current state of the resolver for reporting
	// over the rpc interface.
	currentReport ContractReport

	// reportLock prevents concurrent access to the resolver report.
	reportLock sync.Mutex

	contractResolverKit
}

// newCommitSweepResolver instantiates a new direct commit output resolver.
func newCommitSweepResolver(res lnwallet.CommitOutputResolution,
	broadcastHeight uint32,
	chanPoint wire.OutPoint, resCfg ResolverConfig) *commitSweepResolver {

	r := &commitSweepResolver{
		contractResolverKit: *newContractResolverKit(resCfg),
		commitResolution:    res,
		broadcastHeight:     broadcastHeight,
		chanPoint:           chanPoint,
	}

	r.initLogger(r)
	r.initReport()

	return r
}

// ResolverKey returns an identifier which should be globally unique for this
// particular resolver within the chain the original contract resides within.
func (c *commitSweepResolver) ResolverKey() []byte {
	key := newResolverID(c.commitResolution.SelfOutPoint)
	return key[:]
}

// waitForHeight registers for block notifications and waits for the provided
// block height to be reached.
func (c *commitSweepResolver) waitForHeight(waitHeight uint32) error {
	// Register for block epochs. After registration, the current height
	// will be sent on the channel immediately.
	blockEpochs, err := c.Notifier.RegisterBlockEpochNtfn(nil)
	if err != nil {
		return err
	}
	defer blockEpochs.Cancel()

	for {
		select {
		case newBlock, ok := <-blockEpochs.Epochs:
			if !ok {
				return errResolverShuttingDown
			}
			height := newBlock.Height
			if height >= int32(waitHeight) {
				return nil
			}

		case <-c.quit:
			return errResolverShuttingDown
		}
	}
}

// getCommitTxConfHeight waits for confirmation of the commitment tx and returns
// the confirmation height.
func (c *commitSweepResolver) getCommitTxConfHeight() (uint32, error) {
	txID := c.commitResolution.SelfOutPoint.Hash
	signDesc := c.commitResolution.SelfOutputSignDesc
	pkScript := signDesc.Output.PkScript
	const confDepth = 1
	confChan, err := c.Notifier.RegisterConfirmationsNtfn(
		&txID, pkScript, confDepth, c.broadcastHeight,
	)
	if err != nil {
		return 0, err
	}
	defer confChan.Cancel()

	select {
	case txConfirmation, ok := <-confChan.Confirmed:
		if !ok {
			return 0, fmt.Errorf("cannot get confirmation "+
				"for commit tx %v", txID)
		}

		return txConfirmation.BlockHeight, nil

	case <-c.quit:
		return 0, errResolverShuttingDown
	}
}

// Resolve instructs the contract resolver to resolve the output on-chain. Once
// the output has been *fully* resolved, the function should return immediately
// with a nil ContractResolver value for the first return value.  In the case
// that the contract requires further resolution, then another resolve is
// returned.
//
// NOTE: This function MUST be run as a goroutine.
func (c *commitSweepResolver) Resolve() (ContractResolver, error) {
	// If we're already resolved, then we can exit early.
	if c.resolved {
		return nil, nil
	}

	confHeight, err := c.getCommitTxConfHeight()
	if err != nil {
		return nil, err
	}

	unlockHeight := confHeight + c.commitResolution.MaturityDelay

	c.log.Debugf("commit conf_height=%v, unlock_height=%v",
		confHeight, unlockHeight)

	// Update report now that we learned the confirmation height.
	c.reportLock.Lock()
	c.currentReport.MaturityHeight = unlockHeight
	c.reportLock.Unlock()

	// If there is a csv delay, we'll wait for that.
	if c.commitResolution.MaturityDelay > 0 {
		c.log.Debugf("waiting for csv lock to expire at height %v",
			unlockHeight)

		// We only need to wait for the block before the block that
		// unlocks the spend path.
		err := c.waitForHeight(unlockHeight - 1)
		if err != nil {
			return nil, err
		}
	}

	// The output is on our local commitment if the script starts with
	// OP_IF for the revocation clause. On the remote commitment it will
	// either be a regular P2WKH or a simple sig spend with a CSV delay.
	isLocalCommitTx := c.commitResolution.SelfOutputSignDesc.WitnessScript[0] == txscript.OP_IF
	isDelayedOutput := c.commitResolution.MaturityDelay != 0

	c.log.Debugf("isDelayedOutput=%v, isLocalCommitTx=%v", isDelayedOutput,
		isLocalCommitTx)

	// There're three types of commitments, those that have tweaks
	// for the remote key (us in this case), those that don't, and a third
	// where there is no tweak and the output is delayed. On the local
	// commitment our output will always be delayed. We'll rely on the
	// presence of the commitment tweak to to discern which type of
	// commitment this is.
	var witnessType input.WitnessType
	switch {

	// Delayed output to us on our local commitment.
	case isLocalCommitTx:
		witnessType = input.CommitmentTimeLock

	// A confirmed output to us on the remote commitment.
	case isDelayedOutput:
		witnessType = input.CommitmentToRemoteConfirmed

	// A non-delayed output on the remote commitment where the key is
	// tweakless.
	case c.commitResolution.SelfOutputSignDesc.SingleTweak == nil:
		witnessType = input.CommitSpendNoDelayTweakless

	// A non-delayed output on the remote commitment where the key is
	// tweaked.
	default:
		witnessType = input.CommitmentNoDelay
	}

	c.log.Infof("Sweeping with witness type: %v", witnessType)

	// We'll craft an input with all the information required for
	// the sweeper to create a fully valid sweeping transaction to
	// recover these coins.
	inp := input.NewCsvInput(
		&c.commitResolution.SelfOutPoint,
		witnessType,
		&c.commitResolution.SelfOutputSignDesc,
		c.broadcastHeight,
		c.commitResolution.MaturityDelay,
	)

	// With our input constructed, we'll now offer it to the
	// sweeper.
	c.log.Infof("sweeping commit output")

	feePref := sweep.FeePreference{ConfTarget: commitOutputConfTarget}
	resultChan, err := c.Sweeper.SweepInput(inp, sweep.Params{Fee: feePref})
	if err != nil {
		c.log.Errorf("unable to sweep input: %v", err)

		return nil, err
	}

	// Sweeper is going to join this input with other inputs if
	// possible and publish the sweep tx. When the sweep tx
	// confirms, it signals us through the result channel with the
	// outcome. Wait for this to happen.
	recovered := true
	select {
	case sweepResult := <-resultChan:
		switch sweepResult.Err {
		case sweep.ErrRemoteSpend:
			// If the remote party was able to sweep this output
			// it's likely what we sent was actually a revoked
			// commitment. Report the error and continue to wrap up
			// the contract.
			c.log.Warnf("local commitment output was swept by "+
				"remote party via %v", sweepResult.Tx.TxHash())
			recovered = false
		case nil:
			// No errors, therefore continue processing.
			c.log.Infof("local commitment output fully resolved by "+
				"sweep tx: %v", sweepResult.Tx.TxHash())
		default:
			// Unknown errors.
			c.log.Errorf("unable to sweep input: %v",
				sweepResult.Err)

			return nil, sweepResult.Err
		}
	case <-c.quit:
		return nil, errResolverShuttingDown
	}

	// Funds have been swept and balance is no longer in limbo.
	c.reportLock.Lock()
	if recovered {
		// We only record the balance as recovered if it actually came
		// back to us.
		c.currentReport.RecoveredBalance = c.currentReport.LimboBalance
	}
	c.currentReport.LimboBalance = 0
	c.reportLock.Unlock()

	c.resolved = true
	return nil, c.Checkpoint(c, nil)
}

// Stop signals the resolver to cancel any current resolution processes, and
// suspend.
//
// NOTE: Part of the ContractResolver interface.
func (c *commitSweepResolver) Stop() {
	close(c.quit)
}

// IsResolved returns true if the stored state in the resolve is fully
// resolved. In this case the target output can be forgotten.
//
// NOTE: Part of the ContractResolver interface.
func (c *commitSweepResolver) IsResolved() bool {
	return c.resolved
}

// Encode writes an encoded version of the ContractResolver into the passed
// Writer.
//
// NOTE: Part of the ContractResolver interface.
func (c *commitSweepResolver) Encode(w io.Writer) error {
	if err := encodeCommitResolution(w, &c.commitResolution); err != nil {
		return err
	}

	if err := binary.Write(w, endian, c.resolved); err != nil {
		return err
	}
	if err := binary.Write(w, endian, c.broadcastHeight); err != nil {
		return err
	}
	if _, err := w.Write(c.chanPoint.Hash[:]); err != nil {
		return err
	}
	err := binary.Write(w, endian, c.chanPoint.Index)
	if err != nil {
		return err
	}

	// Previously a sweep tx was serialized at this point. Refactoring
	// removed this, but keep in mind that this data may still be present in
	// the database.

	return nil
}

// newCommitSweepResolverFromReader attempts to decode an encoded
// ContractResolver from the passed Reader instance, returning an active
// ContractResolver instance.
func newCommitSweepResolverFromReader(r io.Reader, resCfg ResolverConfig) (
	*commitSweepResolver, error) {

	c := &commitSweepResolver{
		contractResolverKit: *newContractResolverKit(resCfg),
	}

	if err := decodeCommitResolution(r, &c.commitResolution); err != nil {
		return nil, err
	}

	if err := binary.Read(r, endian, &c.resolved); err != nil {
		return nil, err
	}
	if err := binary.Read(r, endian, &c.broadcastHeight); err != nil {
		return nil, err
	}
	_, err := io.ReadFull(r, c.chanPoint.Hash[:])
	if err != nil {
		return nil, err
	}
	err = binary.Read(r, endian, &c.chanPoint.Index)
	if err != nil {
		return nil, err
	}

	// Previously a sweep tx was deserialized at this point. Refactoring
	// removed this, but keep in mind that this data may still be present in
	// the database.

	c.initLogger(c)
	c.initReport()

	return c, nil
}

// report returns a report on the resolution state of the contract.
func (c *commitSweepResolver) report() *ContractReport {
	c.reportLock.Lock()
	defer c.reportLock.Unlock()

	copy := c.currentReport
	return &copy
}

// initReport initializes the pending channels report for this resolver.
func (c *commitSweepResolver) initReport() {
	amt := btcutil.Amount(
		c.commitResolution.SelfOutputSignDesc.Output.Value,
	)

	// Set the initial report. All fields are filled in, except for the
	// maturity height which remains 0 until Resolve() is executed.
	//
	// TODO(joostjager): Resolvers only activate after the commit tx
	// confirms. With more refactoring in channel arbitrator, it would be
	// possible to make the confirmation height part of ResolverConfig and
	// populate MaturityHeight here.
	c.currentReport = ContractReport{
		Outpoint:         c.commitResolution.SelfOutPoint,
		Type:             ReportOutputUnencumbered,
		Amount:           amt,
		LimboBalance:     amt,
		RecoveredBalance: 0,
	}
}

// A compile time assertion to ensure commitSweepResolver meets the
// ContractResolver interface.
var _ reportingContractResolver = (*commitSweepResolver)(nil)