package routing import ( "bytes" "fmt" "sort" "sync" "sync/atomic" "time" "github.com/boltdb/bolt" "github.com/davecgh/go-spew/spew" "github.com/lightningnetwork/lnd/channeldb" "github.com/lightningnetwork/lnd/htlcswitch" "github.com/lightningnetwork/lnd/lnwallet" "github.com/lightningnetwork/lnd/lnwire" "github.com/lightningnetwork/lnd/routing/chainview" "github.com/roasbeef/btcd/btcec" "github.com/roasbeef/btcd/wire" "github.com/roasbeef/btcutil" "crypto/sha256" "github.com/go-errors/errors" "github.com/lightningnetwork/lightning-onion" ) const ( // DefaultFinalCLTVDelta is the default value to be used as the final // CLTV delta for a route if one is unspecified. DefaultFinalCLTVDelta = 9 ) // ChannelGraphSource represent the source of information about the topology of // lightning network, it responsible for addition of nodes, edges // and applying edges updates, return the current block with with out // topology is synchronized. type ChannelGraphSource interface { // AddNode is used to add information about a node to the router // database. If the node with this pubkey is not present in an existing // channel, it will be ignored. AddNode(node *channeldb.LightningNode) error // AddEdge is used to add edge/channel to the topology of the router, // after all information about channel will be gathered this // edge/channel might be used in construction of payment path. AddEdge(edge *channeldb.ChannelEdgeInfo) error // AddProof updates the channel edge info with proof which is needed to // properly announce the edge to the rest of the network. AddProof(chanID lnwire.ShortChannelID, proof *channeldb.ChannelAuthProof) error // UpdateEdge is used to update edge information, without this message // edge considered as not fully constructed. UpdateEdge(policy *channeldb.ChannelEdgePolicy) error // ForAllOutgoingChannels is used to iterate over all channels // eminating from the "source" node which is the center of the // star-graph. ForAllOutgoingChannels(cb func(c *channeldb.ChannelEdgeInfo, e *channeldb.ChannelEdgePolicy) error) error // CurrentBlockHeight returns the block height from POV of the router // subsystem. CurrentBlockHeight() (uint32, error) // GetChannelByID return the channel by the channel id. GetChannelByID(chanID lnwire.ShortChannelID) (*channeldb.ChannelEdgeInfo, *channeldb.ChannelEdgePolicy, *channeldb.ChannelEdgePolicy, error) // ForEachNode is used to iterate over every node in the known graph. ForEachNode(func(node *channeldb.LightningNode) error) error // ForEachChannel is used to iterate over every channel in the known // graph. ForEachChannel(func(chanInfo *channeldb.ChannelEdgeInfo, e1, e2 *channeldb.ChannelEdgePolicy) error) error } // FeeSchema is the set fee configuration for a Lighting Node on the network. // Using the coefficients described within he schema, the required fee to // forward outgoing payments can be derived. type FeeSchema struct { // BaseFee is the base amount of milli-satoshis that will be chained // for ANY payment forwarded. BaseFee lnwire.MilliSatoshi // FeeRate is the rate that will be charged for forwarding payments. // This value should be interpreted as the numerator for a fraction // (fixed point arithmetic) whose denominator is 1 million. As a result // the effective fee rate charged per mSAT will be: (amount * // FeeRate/1,000,000). FeeRate uint32 } // Config defines the configuration for the ChannelRouter. ALL elements within // the configuration MUST be non-nil for the ChannelRouter to carry out its // duties. type Config struct { // Graph is the channel graph that the ChannelRouter will use to gather // metrics from and also to carry out path finding queries. // TODO(roasbeef): make into an interface Graph *channeldb.ChannelGraph // Chain is the router's source to the most up-to-date blockchain data. // All incoming advertised channels will be checked against the chain // to ensure that the channels advertised are still open. Chain lnwallet.BlockChainIO // ChainView is an instance of a FilteredChainView which is used to // watch the sub-set of the UTXO set (the set of active channels) that // we need in order to properly maintain the channel graph. ChainView chainview.FilteredChainView // SendToSwitch is a function that directs a link-layer switch to // forward a fully encoded payment to the first hop in the route // denoted by its public key. A non-nil error is to be returned if the // payment was unsuccessful. SendToSwitch func(firstHop *btcec.PublicKey, htlcAdd *lnwire.UpdateAddHTLC, circuit *sphinx.Circuit) ([sha256.Size]byte, error) // ChannelPruneExpiry is the duration used to determine if a channel // should be pruned or not. If the delta between now and when the // channel was last updated is greater than ChannelPruneExpiry, then // the channel is marked as a zombie channel eligible for pruning. ChannelPruneExpiry time.Duration // GraphPruneInterval is used as an interval to determine how often we // should examine the channel graph to garbage collect zombie channels. GraphPruneInterval time.Duration } // routeTuple is an entry within the ChannelRouter's route cache. We cache // prospective routes based on first the destination, and then the target // amount. We required the target amount as that will influence the available // set of paths for a payment. type routeTuple struct { amt lnwire.MilliSatoshi dest [33]byte } // newRouteTuple creates a new route tuple from the target and amount. func newRouteTuple(amt lnwire.MilliSatoshi, dest []byte) routeTuple { r := routeTuple{ amt: amt, } copy(r.dest[:], dest) return r } // ChannelRouter is the layer 3 router within the Lightning stack. Below the // ChannelRouter is the HtlcSwitch, and below that is the Bitcoin blockchain // itself. The primary role of the ChannelRouter is to respond to queries for // potential routes that can support a payment amount, and also general graph // reachability questions. The router will prune the channel graph // automatically as new blocks are discovered which spend certain known funding // outpoints, thereby closing their respective channels. type ChannelRouter struct { ntfnClientCounter uint64 started uint32 stopped uint32 bestHeight uint32 // cfg is a copy of the configuration struct that the ChannelRouter was // initialized with. cfg *Config // selfNode is the center of the star-graph centered around the // ChannelRouter. The ChannelRouter uses this node as a starting point // when doing any path finding. selfNode *channeldb.LightningNode // routeCache is a map that caches the k-shortest paths from ourselves // to a given target destination for a particular payment amount. This // map is used as an optimization to speed up subsequent payments to a // particular destination. This map will be cleared each time a new // channel announcement is accepted, or a new block arrives that // results in channels being closed. // // TODO(roasbeef): make LRU routeCacheMtx sync.RWMutex routeCache map[routeTuple][]*Route // newBlocks is a channel in which new blocks connected to the end of // the main chain are sent over, and blocks updated after a call to // UpdateFilter. newBlocks <-chan *chainview.FilteredBlock // staleBlocks is a channel in which blocks disconnected fromt the end // of our currently known best chain are sent over. staleBlocks <-chan *chainview.FilteredBlock // networkUpdates is a channel that carries new topology updates // messages from outside the ChannelRouter to be processed by the // networkHandler. networkUpdates chan *routingMsg // topologyClients maps a client's unique notification ID to a // topologyClient client that contains its notification dispatch // channel. topologyClients map[uint64]*topologyClient // ntfnClientUpdates is a channel that's used to send new updates to // topology notification clients to the ChannelRouter. Updates either // add a new notification client, or cancel notifications for an // existing client. ntfnClientUpdates chan *topologyClientUpdate // missionControl is a shared memory of sorts that executions of // payment path finding use in order to remember which vertexes/edges // were pruned from prior attempts. During SendPayment execution, // errors sent by nodes are mapped into a vertex or edge to be pruned. // Each run will then take into account this set of pruned // vertexes/edges to reduce route failure and pass on graph information // gained to the next execution. missionControl *missionControl sync.RWMutex quit chan struct{} wg sync.WaitGroup } // A compile time check to ensure ChannelRouter implements the // ChannelGraphSource interface. var _ ChannelGraphSource = (*ChannelRouter)(nil) // New creates a new instance of the ChannelRouter with the specified // configuration parameters. As part of initialization, if the router detects // that the channel graph isn't fully in sync with the latest UTXO (since the // channel graph is a subset of the UTXO set) set, then the router will proceed // to fully sync to the latest state of the UTXO set. func New(cfg Config) (*ChannelRouter, error) { selfNode, err := cfg.Graph.SourceNode() if err != nil { return nil, err } return &ChannelRouter{ cfg: &cfg, networkUpdates: make(chan *routingMsg), topologyClients: make(map[uint64]*topologyClient), ntfnClientUpdates: make(chan *topologyClientUpdate), missionControl: newMissionControl(cfg.Graph, selfNode), selfNode: selfNode, routeCache: make(map[routeTuple][]*Route), quit: make(chan struct{}), }, nil } // Start launches all the goroutines the ChannelRouter requires to carry out // its duties. If the router has already been started, then this method is a // noop. func (r *ChannelRouter) Start() error { if !atomic.CompareAndSwapUint32(&r.started, 0, 1) { return nil } log.Tracef("Channel Router starting") // First, we'll start the chain view instance (if it isn't already // started). if err := r.cfg.ChainView.Start(); err != nil { return err } // Once the instance is active, we'll fetch the channel we'll receive // notifications over. r.newBlocks = r.cfg.ChainView.FilteredBlocks() r.staleBlocks = r.cfg.ChainView.DisconnectedBlocks() // Before we begin normal operation of the router, we first need to // synchronize the channel graph to the latest state of the UTXO set. if err := r.syncGraphWithChain(); err != nil { return err } // Once we've concluded our manual block pruning, we'll constrcut and // apply a fresh chain filter to the active FilteredChainView instance. channelView, err := r.cfg.Graph.ChannelView() if err != nil && err != channeldb.ErrGraphNoEdgesFound { return err } log.Infof("Filtering chain using %v channels active", len(channelView)) err = r.cfg.ChainView.UpdateFilter(channelView, r.bestHeight) if err != nil { return err } r.wg.Add(1) go r.networkHandler() return nil } // Stop signals the ChannelRouter to gracefully halt all routines. This method // will *block* until all goroutines have excited. If the channel router has // already stopped then this method will return immediately. func (r *ChannelRouter) Stop() error { if !atomic.CompareAndSwapUint32(&r.stopped, 0, 1) { return nil } log.Infof("Channel Router shutting down") if err := r.cfg.ChainView.Stop(); err != nil { return err } close(r.quit) r.wg.Wait() return nil } // syncGraphWithChain attempts to synchronize the current channel graph with // the latest UTXO set state. This process involves pruning from the channel // graph any channels which have been closed by spending their funding output // since we've been down. func (r *ChannelRouter) syncGraphWithChain() error { // First, we'll need to check to see if we're already in sync with the // latest state of the UTXO set. bestHash, bestHeight, err := r.cfg.Chain.GetBestBlock() if err != nil { return err } r.bestHeight = uint32(bestHeight) pruneHash, pruneHeight, err := r.cfg.Graph.PruneTip() if err != nil { switch { // If the graph has never been pruned, or hasn't fully been // created yet, then we don't treat this as an explicit error. case err == channeldb.ErrGraphNeverPruned: case err == channeldb.ErrGraphNotFound: default: return err } } log.Infof("Prune tip for Channel Graph: height=%v, hash=%v", pruneHeight, pruneHash) switch { // If the graph has never been pruned, then we can exit early as this // entails it's being created for the first time and hasn't seen any // block or created channels. case pruneHeight == 0 || pruneHash == nil: return nil // If the block hashes and heights match exactly, then we don't need to // prune the channel graph as we're already fully in sync. case bestHash.IsEqual(pruneHash) && uint32(bestHeight) == pruneHeight: return nil } // If the main chain blockhash at prune height is different from the // prune hash, this might indicate the database is on a stale branch. mainBlockHash, err := r.cfg.Chain.GetBlockHash(int64(pruneHeight)) if err != nil { return err } // While we are on a stale branch of the chain, walk backwards to find // first common block. for !pruneHash.IsEqual(mainBlockHash) { log.Infof("channel graph is stale. Disconnecting block %v "+ "(hash=%v)", pruneHeight, pruneHash) // Prune the graph for every channel that was opened at height // >= pruneHeigth. _, err := r.cfg.Graph.DisconnectBlockAtHeight(pruneHeight) if err != nil { return err } pruneHash, pruneHeight, err = r.cfg.Graph.PruneTip() if err != nil { switch { // If at this point the graph has never been pruned, we // can exit as this entails we are back to the point // where it hasn't seen any block or created channels, // alas there's nothing left to prune. case err == channeldb.ErrGraphNeverPruned: return nil case err == channeldb.ErrGraphNotFound: return nil default: return err } } mainBlockHash, err = r.cfg.Chain.GetBlockHash(int64(pruneHeight)) if err != nil { return err } } log.Infof("Syncing channel graph from height=%v (hash=%v) to height=%v "+ "(hash=%v)", pruneHeight, pruneHash, bestHeight, bestHash) // If we're not yet caught up, then we'll walk forward in the chain in // the chain pruning the channel graph with each new block in the chain // that hasn't yet been consumed by the channel graph. var numChansClosed uint32 for nextHeight := pruneHeight + 1; nextHeight <= uint32(bestHeight); nextHeight++ { // Using the next height, request a manual block pruning from // the chainview for the particular block hash. nextHash, err := r.cfg.Chain.GetBlockHash(int64(nextHeight)) if err != nil { return err } filterBlock, err := r.cfg.ChainView.FilterBlock(nextHash) if err != nil { return err } // We're only interested in all prior outputs that've been // spent in the block, so collate all the referenced previous // outpoints within each tx and input. var spentOutputs []*wire.OutPoint for _, tx := range filterBlock.Transactions { for _, txIn := range tx.TxIn { spentOutputs = append(spentOutputs, &txIn.PreviousOutPoint) } } // With the spent outputs gathered, attempt to prune the // channel graph, also passing in the hash+height of the block // being pruned so the prune tip can be updated. closedChans, err := r.cfg.Graph.PruneGraph(spentOutputs, nextHash, nextHeight) if err != nil { return err } numClosed := uint32(len(closedChans)) log.Infof("Block %v (height=%v) closed %v channels", nextHash, nextHeight, numClosed) numChansClosed += numClosed } log.Infof("Graph pruning complete: %v channels we're closed since "+ "height %v", numChansClosed, pruneHeight) return nil } // networkHandler is the primary goroutine for the ChannelRouter. The roles of // this goroutine include answering queries related to the state of the // network, pruning the graph on new block notification, applying network // updates, and registering new topology clients. // // NOTE: This MUST be run as a goroutine. func (r *ChannelRouter) networkHandler() { defer r.wg.Done() graphPruneTicker := time.NewTicker(r.cfg.GraphPruneInterval) defer graphPruneTicker.Stop() for { select { // A new fully validated network update has just arrived. As a // result we'll modify the channel graph accordingly depending // on the exact type of the message. case updateMsg := <-r.networkUpdates: // Process the routing update to determine if this is // either a new update from our PoV or an update to a // prior vertex/edge we previously accepted. err := r.processUpdate(updateMsg.msg) updateMsg.err <- err if err != nil { continue } // Send off a new notification for the newly accepted // update. topChange := &TopologyChange{} err = addToTopologyChange(r.cfg.Graph, topChange, updateMsg.msg) if err != nil { log.Errorf("unable to update topology "+ "change notification: %v", err) continue } if !topChange.isEmpty() { r.notifyTopologyChange(topChange) } // TODO(roasbeef): remove all unconnected vertexes // after N blocks pass with no corresponding // announcements. case chainUpdate, ok := <-r.staleBlocks: // If the channel has been closed, then this indicates // the daemon is shutting down, so we exit ourselves. if !ok { return } // Since this block is stale, we update our best height // to the previous block. blockHeight := uint32(chainUpdate.Height) r.bestHeight = blockHeight - 1 // Update the channel graph to reflect that this block // was disconnected. _, err := r.cfg.Graph.DisconnectBlockAtHeight(blockHeight) if err != nil { log.Errorf("unable to prune graph with stale "+ "block: %v", err) continue } // Invalidate the route cache, as some channels might // not be confirmed anymore. r.routeCacheMtx.Lock() r.routeCache = make(map[routeTuple][]*Route) r.routeCacheMtx.Unlock() // TODO(halseth): notify client about the reorg? // A new block has arrived, so we can prune the channel graph // of any channels which were closed in the block. case chainUpdate, ok := <-r.newBlocks: // If the channel has been closed, then this indicates // the daemon is shutting down, so we exit ourselves. if !ok { return } // Once a new block arrives, we update our running // track of the height of the chain tip. blockHeight := uint32(chainUpdate.Height) r.bestHeight = blockHeight log.Infof("Pruning channel graph using block %v (height=%v)", chainUpdate.Hash, blockHeight) // We're only interested in all prior outputs that've // been spent in the block, so collate all the // referenced previous outpoints within each tx and // input. var spentOutputs []*wire.OutPoint for _, tx := range chainUpdate.Transactions { for _, txIn := range tx.TxIn { spentOutputs = append(spentOutputs, &txIn.PreviousOutPoint) } } // With the spent outputs gathered, attempt to prune // the channel graph, also passing in the hash+height // of the block being pruned so the prune tip can be // updated. chansClosed, err := r.cfg.Graph.PruneGraph(spentOutputs, &chainUpdate.Hash, chainUpdate.Height) if err != nil { log.Errorf("unable to prune routing table: %v", err) continue } log.Infof("Block %v (height=%v) closed %v channels", chainUpdate.Hash, blockHeight, len(chansClosed)) // Invalidate the route cache as the block height has // changed which will invalidate the HTLC timeouts we // have crafted within each of the pre-computed routes. // // TODO(roasbeef): need to invalidate after each // chan ann update? // * can have map of chanID to routes involved, avoids // full invalidation r.routeCacheMtx.Lock() r.routeCache = make(map[routeTuple][]*Route) r.routeCacheMtx.Unlock() if len(chansClosed) == 0 { continue } // Notify all currently registered clients of the newly // closed channels. closeSummaries := createCloseSummaries(blockHeight, chansClosed...) r.notifyTopologyChange(&TopologyChange{ ClosedChannels: closeSummaries, }) // A new notification client update has arrived. We're either // gaining a new client, or cancelling notifications for an // existing client. case ntfnUpdate := <-r.ntfnClientUpdates: clientID := ntfnUpdate.clientID if ntfnUpdate.cancel { if client, ok := r.topologyClients[ntfnUpdate.clientID]; ok { delete(r.topologyClients, clientID) close(client.exit) client.wg.Wait() close(client.ntfnChan) } continue } r.topologyClients[ntfnUpdate.clientID] = &topologyClient{ ntfnChan: ntfnUpdate.ntfnChan, exit: make(chan struct{}), } // The graph prune ticker has ticked, so we'll examine the // state of the known graph to filter out any zombie channels // for pruning. case <-graphPruneTicker.C: var chansToPrune []wire.OutPoint chanExpiry := r.cfg.ChannelPruneExpiry log.Infof("Examining Channel Graph for zombie channels") // First, we'll collect all the channels which are // eligible for garbage collection due to being // zombies. filterPruneChans := func(info *channeldb.ChannelEdgeInfo, e1, e2 *channeldb.ChannelEdgePolicy) error { // We'll ensure that we don't attempt to prune // our *own* channels from the graph, as in any // case this shuold be re-advertised by the // sub-system above us. if info.NodeKey1.IsEqual(r.selfNode.PubKey) || info.NodeKey2.IsEqual(r.selfNode.PubKey) { return nil } // If *both* edges haven't been updated for a // period of chanExpiry, then we'll mark the // channel itself as eligible for graph // pruning. e1Zombie, e2Zombie := true, true if e1 != nil { e1Zombie = time.Since(e1.LastUpdate) >= chanExpiry log.Tracef("Edge #1 of ChannelPoint(%v) "+ "last update: %v", info.ChannelPoint, e1.LastUpdate) } if e2 != nil { e2Zombie = time.Since(e2.LastUpdate) >= chanExpiry log.Tracef("Edge #2 of ChannelPoint(%v) "+ "last update: %v", info.ChannelPoint, e2.LastUpdate) } if e1Zombie && e2Zombie { log.Infof("ChannelPoint(%v) is a "+ "zombie, collecting to prune", info.ChannelPoint) // TODO(roasbeef): add ability to // delete single directional edge chansToPrune = append(chansToPrune, info.ChannelPoint) } return nil } err := r.cfg.Graph.ForEachChannel(filterPruneChans) if err != nil { log.Errorf("Unable to local zombie chans: %v", err) continue } log.Infof("Pruning %v Zombie Channels", len(chansToPrune)) // With the set zombie-like channels obtained, we'll do // another pass to delete al zombie channels from the // channel graph. for _, chanToPrune := range chansToPrune { log.Tracef("Pruning zombie chan ChannelPoint(%v)", chanToPrune) err := r.cfg.Graph.DeleteChannelEdge(&chanToPrune) if err != nil { log.Errorf("Unable to prune zombie "+ "chans: %v", err) continue } } // The router has been signalled to exit, to we exit our main // loop so the wait group can be decremented. case <-r.quit: return } } } // processUpdate processes a new relate authenticated channel/edge, node or // channel/edge update network update. If the update didn't affect the internal // state of the draft due to either being out of date, invalid, or redundant, // then error is returned. func (r *ChannelRouter) processUpdate(msg interface{}) error { var invalidateCache bool switch msg := msg.(type) { case *channeldb.LightningNode: // If we are not already aware of this node, it means that we // don't know about any channel using this node. To avoid a DoS // attack by node announcements, we will ignore such nodes. If // we do know about this node, check that this update brings // info newer than what we already have. lastUpdate, exists, err := r.cfg.Graph.HasLightningNode(msg.PubKey) if err != nil { return errors.Errorf("unable to query for the "+ "existence of node: %v", err) } if !exists { return newErrf(ErrIgnored, "Ignoring node announcement"+ " for node not found in channel graph (%x)", msg.PubKey.SerializeCompressed()) } // If we've reached this point then we're aware of the vertex // being advertised. So we now check if the new message has a // new time stamp, if not then we won't accept the new data as // it would override newer data. if exists && lastUpdate.After(msg.LastUpdate) || lastUpdate.Equal(msg.LastUpdate) { return newErrf(ErrOutdated, "Ignoring outdated "+ "announcement for %x", msg.PubKey.SerializeCompressed()) } if err := r.cfg.Graph.AddLightningNode(msg); err != nil { return errors.Errorf("unable to add node %v to the "+ "graph: %v", msg.PubKey.SerializeCompressed(), err) } log.Infof("Updated vertex data for node=%x", msg.PubKey.SerializeCompressed()) case *channeldb.ChannelEdgeInfo: // Prior to processing the announcement we first check if we // already know of this channel, if so, then we can exit early. _, _, exists, err := r.cfg.Graph.HasChannelEdge(msg.ChannelID) if err != nil && err != channeldb.ErrGraphNoEdgesFound { return errors.Errorf("unable to check for edge "+ "existence: %v", err) } else if exists { return newErrf(ErrIgnored, "Ignoring msg for known "+ "chan_id=%v", msg.ChannelID) } // Query the database for the existence of the two nodes in this // channel. If not found, add a partial node to the database, // containing only the node keys. _, exists, _ = r.cfg.Graph.HasLightningNode(msg.NodeKey1) if !exists { node1 := &channeldb.LightningNode{ PubKey: msg.NodeKey1, HaveNodeAnnouncement: false, } err := r.cfg.Graph.AddLightningNode(node1) if err != nil { return errors.Errorf("unable to add node %v to"+ " the graph: %v", node1.PubKey.SerializeCompressed(), err) } } _, exists, _ = r.cfg.Graph.HasLightningNode(msg.NodeKey2) if !exists { node2 := &channeldb.LightningNode{ PubKey: msg.NodeKey2, HaveNodeAnnouncement: false, } err := r.cfg.Graph.AddLightningNode(node2) if err != nil { return errors.Errorf("unable to add node %v to"+ " the graph: %v", node2.PubKey.SerializeCompressed(), err) } } // Before we can add the channel to the channel graph, we need // to obtain the full funding outpoint that's encoded within // the channel ID. channelID := lnwire.NewShortChanIDFromInt(msg.ChannelID) fundingPoint, err := r.fetchChanPoint(&channelID) if err != nil { return errors.Errorf("unable to fetch chan point for "+ "chan_id=%v: %v", msg.ChannelID, err) } // Now that we have the funding outpoint of the channel, ensure // that it hasn't yet been spent. If so, then this channel has // been closed so we'll ignore it. chanUtxo, err := r.cfg.Chain.GetUtxo(fundingPoint, channelID.BlockHeight) if err != nil { return errors.Errorf("unable to fetch utxo for "+ "chan_id=%v, chan_point=%v: %v", msg.ChannelID, fundingPoint, err) } // Recreate witness output to be sure that declared in channel // edge bitcoin keys and channel value corresponds to the // reality. _, witnessOutput, err := lnwallet.GenFundingPkScript( msg.BitcoinKey1.SerializeCompressed(), msg.BitcoinKey2.SerializeCompressed(), chanUtxo.Value, ) if err != nil { return errors.Errorf("unable to create funding pk "+ "script: %v", err) } // By checking the equality of witness pkscripts we checks that // funding witness script is multisignature lock which contains // both local and remote public keys which was declared in // channel edge and also that the announced channel value is // right. if !bytes.Equal(witnessOutput.PkScript, chanUtxo.PkScript) { return errors.Errorf("pkScript mismatch: expected %x, "+ "got %x", witnessOutput.PkScript, chanUtxo.PkScript) } // TODO(roasbeef): this is a hack, needs to be removed // after commitment fees are dynamic. msg.Capacity = btcutil.Amount(chanUtxo.Value) msg.ChannelPoint = *fundingPoint if err := r.cfg.Graph.AddChannelEdge(msg); err != nil { return errors.Errorf("unable to add edge: %v", err) } invalidateCache = true log.Infof("New channel discovered! Link "+ "connects %x and %x with ChannelPoint(%v): "+ "chan_id=%v, capacity=%v", msg.NodeKey1.SerializeCompressed(), msg.NodeKey2.SerializeCompressed(), fundingPoint, msg.ChannelID, msg.Capacity) // As a new edge has been added to the channel graph, we'll // update the current UTXO filter within our active // FilteredChainView so we are notified if/when this channel is // closed. filterUpdate := []wire.OutPoint{*fundingPoint} err = r.cfg.ChainView.UpdateFilter(filterUpdate, r.bestHeight) if err != nil { return errors.Errorf("unable to update chain "+ "view: %v", err) } case *channeldb.ChannelEdgePolicy: channelID := lnwire.NewShortChanIDFromInt(msg.ChannelID) edge1Timestamp, edge2Timestamp, exists, err := r.cfg.Graph.HasChannelEdge( msg.ChannelID, ) if err != nil && err != channeldb.ErrGraphNoEdgesFound { return errors.Errorf("unable to check for edge "+ "existence: %v", err) } // As edges are directional edge node has a unique policy for // the direction of the edge they control. Therefore we first // check if we already have the most up to date information for // that edge. If so, then we can exit early. switch msg.Flags { // A flag set of 0 indicates this is an announcement for the // "first" node in the channel. case 0: if edge1Timestamp.After(msg.LastUpdate) || edge1Timestamp.Equal(msg.LastUpdate) { return newErrf(ErrIgnored, "Ignoring update "+ "(flags=%v) for known chan_id=%v", msg.Flags, msg.ChannelID) } // Similarly, a flag set of 1 indicates this is an announcement // for the "second" node in the channel. case 1: if edge2Timestamp.After(msg.LastUpdate) || edge2Timestamp.Equal(msg.LastUpdate) { return newErrf(ErrIgnored, "Ignoring update "+ "(flags=%v) for known chan_id=%v", msg.Flags, msg.ChannelID) } } if !exists { // Before we can update the channel information, we'll // ensure that the target channel is still open by // querying the utxo-set for its existence. chanPoint, err := r.fetchChanPoint(&channelID) if err != nil { return errors.Errorf("unable to fetch chan "+ "point for chan_id=%v: %v", msg.ChannelID, err) } _, err = r.cfg.Chain.GetUtxo( chanPoint, channelID.BlockHeight, ) if err != nil { return errors.Errorf("unable to fetch utxo for "+ "chan_id=%v: %v", msg.ChannelID, err) } } // Now that we know this isn't a stale update, we'll apply the // new edge policy to the proper directional edge within the // channel graph. if err = r.cfg.Graph.UpdateEdgePolicy(msg); err != nil { err := errors.Errorf("unable to add channel: %v", err) log.Error(err) return err } invalidateCache = true log.Infof("New channel update applied: %v", spew.Sdump(msg)) default: return errors.Errorf("wrong routing update message type") } // If we've received a channel update, then invalidate the route cache // as channels within the graph have closed, which may affect our // choice of the KSP's for a particular routeTuple. if invalidateCache { r.routeCacheMtx.Lock() r.routeCache = make(map[routeTuple][]*Route) r.routeCacheMtx.Unlock() } return nil } // fetchChanPoint retrieves the original outpoint which is encoded within the // channelID. // // TODO(roasbeef): replace with call to GetBlockTransaction? (would allow to // later use getblocktxn) func (r *ChannelRouter) fetchChanPoint(chanID *lnwire.ShortChannelID) (*wire.OutPoint, error) { // First fetch the block hash by the block number encoded, then use // that hash to fetch the block itself. blockNum := int64(chanID.BlockHeight) blockHash, err := r.cfg.Chain.GetBlockHash(blockNum) if err != nil { return nil, err } fundingBlock, err := r.cfg.Chain.GetBlock(blockHash) if err != nil { return nil, err } // As a sanity check, ensure that the advertised transaction index is // within the bounds of the total number of transactions within a // block. numTxns := uint32(len(fundingBlock.Transactions)) if chanID.TxIndex > numTxns-1 { return nil, fmt.Errorf("tx_index=#%v is out of range "+ "(max_index=%v), network_chan_id=%v\n", chanID.TxIndex, numTxns-1, spew.Sdump(chanID)) } // Finally once we have the block itself, we seek to the targeted // transaction index to obtain the funding output and txid. fundingTx := fundingBlock.Transactions[chanID.TxIndex] return &wire.OutPoint{ Hash: fundingTx.TxHash(), Index: uint32(chanID.TxPosition), }, nil } // routingMsg couples a routing related routing topology update to the // error channel. type routingMsg struct { msg interface{} err chan error } // pruneNodeFromRoutes accepts set of routes, and returns a new set of routes // with the target node filtered out. func pruneNodeFromRoutes(routes []*Route, skipNode vertex) []*Route { // TODO(roasbeef): pass in slice index? prunedRoutes := make([]*Route, 0, len(routes)) for _, route := range routes { if route.containsNode(skipNode) { continue } prunedRoutes = append(prunedRoutes, route) } log.Tracef("Filtered out %v routes with node %x", len(routes)-len(prunedRoutes), skipNode[:]) return prunedRoutes } // pruneChannelFromRoutes accepts a set of routes, and returns a new set of // routes with the target channel filtered out. func pruneChannelFromRoutes(routes []*Route, skipChan uint64) []*Route { prunedRoutes := make([]*Route, 0, len(routes)) for _, route := range routes { if route.containsChannel(skipChan) { continue } prunedRoutes = append(prunedRoutes, route) } log.Tracef("Filtered out %v routes with channel %v", len(routes)-len(prunedRoutes), skipChan) return prunedRoutes } // FindRoutes attempts to query the ChannelRouter for the all available paths // to a particular target destination which is able to send `amt` after // factoring in channel capacities and cumulative fees along each route route. // To find all eligible paths, we use a modified version of Yen's algorithm // which itself uses a modified version of Dijkstra's algorithm within its // inner loop. Once we have a set of candidate routes, we calculate the // required fee and time lock values running backwards along the route. The // route that will be ranked the highest is the one with the lowest cumulative // fee along the route. func (r *ChannelRouter) FindRoutes(target *btcec.PublicKey, amt lnwire.MilliSatoshi, finalExpiry ...uint16) ([]*Route, error) { var finalCLTVDelta uint16 if len(finalExpiry) == 0 { finalCLTVDelta = DefaultFinalCLTVDelta } else { finalCLTVDelta = finalExpiry[0] } // TODO(roasbeef): make num routes a param dest := target.SerializeCompressed() log.Debugf("Searching for path to %x, sending %v", dest, amt) // Before attempting to perform a series of graph traversals to find // the k-shortest paths to the destination, we'll first consult our // path cache rt := newRouteTuple(amt, dest) r.routeCacheMtx.RLock() routes, ok := r.routeCache[rt] r.routeCacheMtx.RUnlock() // If we already have a cached route, then we'll return it directly as // there's no need to repeat the computation. if ok { return routes, nil } // If we don't have a set of routes cached, we'll query the graph for a // set of potential routes to the destination node that can support our // payment amount. If no such routes can be found then an error will be // returned. // We can short circuit the routing by opportunistically checking to // see if the target vertex event exists in the current graph. if _, exists, err := r.cfg.Graph.HasLightningNode(target); err != nil { return nil, err } else if !exists { log.Debugf("Target %x is not in known graph", dest) return nil, newErrf(ErrTargetNotInNetwork, "target not found") } // We'll also fetch the current block height so we can properly // calculate the required HTLC time locks within the route. _, currentHeight, err := r.cfg.Chain.GetBestBlock() if err != nil { return nil, err } tx, err := r.cfg.Graph.Database().Begin(false) if err != nil { tx.Rollback() return nil, err } // Now that we know the destination is reachable within the graph, // we'll execute our KSP algorithm to find the k-shortest paths from // our source to the destination. shortestPaths, err := findPaths(tx, r.cfg.Graph, r.selfNode, target, amt) if err != nil { tx.Rollback() return nil, err } tx.Rollback() // Now that we have a set of paths, we'll need to turn them into // *routes* by computing the required time-lock and fee information for // each path. During this process, some paths may be discarded if they // aren't able to support the total satoshis flow once fees have been // factored in. validRoutes := make([]*Route, 0, len(shortestPaths)) sourceVertex := newVertex(r.selfNode.PubKey) for _, path := range shortestPaths { // Attempt to make the path into a route. We snip off the first // hop in the path as it contains a "self-hop" that is inserted // by our KSP algorithm. route, err := newRoute(amt, sourceVertex, path[1:], uint32(currentHeight), finalCLTVDelta) if err != nil { continue } // If the path as enough total flow to support the computed // route, then we'll add it to our set of valid routes. validRoutes = append(validRoutes, route) } // If all our perspective routes were eliminating during the transition // from path to route, then we'll return an error to the caller if len(validRoutes) == 0 { return nil, newErr(ErrNoPathFound, "unable to find a path to "+ "destination") } // Finally, we'll sort the set of validate routes to optimize for // lowest total fees, using the required time-lock within the // route as a tie-breaker. sort.Slice(validRoutes, func(i, j int) bool { // To make this decision we first check if the total fees // required for both routes are equal. If so, then we'll let // the total time lock be the tie breaker. Otherwise, we'll // put the route with the lowest total fees first. if validRoutes[i].TotalFees == validRoutes[j].TotalFees { timeLockI := validRoutes[i].TotalTimeLock timeLockJ := validRoutes[j].TotalTimeLock return timeLockI < timeLockJ } return validRoutes[i].TotalFees < validRoutes[j].TotalFees }) go log.Tracef("Obtained %v paths sending %v to %x: %v", len(validRoutes), amt, dest, newLogClosure(func() string { return spew.Sdump(validRoutes) }), ) // Populate the cache with this set of fresh routes so we can // reuse them in the future. r.routeCacheMtx.Lock() r.routeCache[rt] = validRoutes r.routeCacheMtx.Unlock() return validRoutes, nil } // generateSphinxPacket generates then encodes a sphinx packet which encodes // the onion route specified by the passed layer 3 route. The blob returned // from this function can immediately be included within an HTLC add packet to // be sent to the first hop within the route. func generateSphinxPacket(route *Route, paymentHash []byte) ([]byte, *sphinx.Circuit, error) { // First obtain all the public keys along the route which are contained // in each hop. nodes := make([]*btcec.PublicKey, len(route.Hops)) for i, hop := range route.Hops { // We create a new instance of the public key to avoid possibly // mutating the curve parameters, which are unset in a higher // level in order to avoid spamming the logs. pub := btcec.PublicKey{ Curve: btcec.S256(), X: hop.Channel.Node.PubKey.X, Y: hop.Channel.Node.PubKey.Y, } nodes[i] = &pub } // Next we generate the per-hop payload which gives each node within // the route the necessary information (fees, CLTV value, etc) to // properly forward the payment. hopPayloads := route.ToHopPayloads() log.Tracef("Constructed per-hop payloads for payment_hash=%x: %v", paymentHash[:], spew.Sdump(hopPayloads)) sessionKey, err := btcec.NewPrivateKey(btcec.S256()) if err != nil { return nil, nil, err } // Next generate the onion routing packet which allows us to perform // privacy preserving source routing across the network. sphinxPacket, err := sphinx.NewOnionPacket(nodes, sessionKey, hopPayloads, paymentHash) if err != nil { return nil, nil, err } // Finally, encode Sphinx packet using it's wire representation to be // included within the HTLC add packet. var onionBlob bytes.Buffer if err := sphinxPacket.Encode(&onionBlob); err != nil { return nil, nil, err } log.Tracef("Generated sphinx packet: %v", newLogClosure(func() string { // We unset the internal curve here in order to keep // the logs from getting noisy. sphinxPacket.EphemeralKey.Curve = nil return spew.Sdump(sphinxPacket) }), ) return onionBlob.Bytes(), &sphinx.Circuit{ SessionKey: sessionKey, PaymentPath: nodes, }, nil } // LightningPayment describes a payment to be sent through the network to the // final destination. type LightningPayment struct { // Target is the node in which the payment should be routed towards. Target *btcec.PublicKey // Amount is the value of the payment to send through the network in // milli-satoshis. Amount lnwire.MilliSatoshi // PaymentHash is the r-hash value to use within the HTLC extended to // the first hop. PaymentHash [32]byte // FinalCLTVDelta is the CTLV expiry delta to use for the _final_ hop // in the route. This means that the final hop will have a CLTV delta // of at least: currentHeight + FinalCLTVDelta. If this value is // unspcified, then a default value of DefaultFinalCLTVDelta will be // used. FinalCLTVDelta *uint16 // TODO(roasbeef): add e2e message? } // SendPayment attempts to send a payment as described within the passed // LightningPayment. This function is blocking and will return either: when the // payment is successful, or all candidates routes have been attempted and // resulted in a failed payment. If the payment succeeds, then a non-nil Route // will be returned which describes the path the successful payment traversed // within the network to reach the destination. Additionally, the payment // preimage will also be returned. func (r *ChannelRouter) SendPayment(payment *LightningPayment) ([32]byte, *Route, error) { log.Tracef("Dispatching route for lightning payment: %v", newLogClosure(func() string { payment.Target.Curve = nil return spew.Sdump(payment) }), ) var ( preImage [32]byte sendError error ) // We'll also fetch the current block height so we can properly // calculate the required HTLC time locks within the route. _, currentHeight, err := r.cfg.Chain.GetBestBlock() if err != nil { return preImage, nil, err } var finalCLTVDelta uint16 if payment.FinalCLTVDelta == nil { finalCLTVDelta = DefaultFinalCLTVDelta } else { finalCLTVDelta = *payment.FinalCLTVDelta } // We'll continue until either our payment succeeds, or we encounter a // critical error during path finding. for { // We'll kick things off by requesting a new route from mission // control, which will incoroporate the current best known // state of the channel graph and our past HTLC routing // successes/failures. route, err := r.missionControl.RequestRoute(payment, uint32(currentHeight), finalCLTVDelta) if err != nil { // If we're unable to successfully make a payment using // any of the routes we've found, then return an error. if sendError != nil { return [32]byte{}, nil, fmt.Errorf("unable to "+ "route payment to destination: %v", sendError) } return preImage, nil, err } log.Tracef("Attempting to send payment %x, using route: %v", payment.PaymentHash, newLogClosure(func() string { return spew.Sdump(route) }), ) // Generate the raw encoded sphinx packet to be included along // with the htlcAdd message that we send directly to the // switch. onionBlob, circuit, err := generateSphinxPacket(route, payment.PaymentHash[:]) if err != nil { return preImage, nil, err } // Craft an HTLC packet to send to the layer 2 switch. The // metadata within this packet will be used to route the // payment through the network, starting with the first-hop. htlcAdd := &lnwire.UpdateAddHTLC{ Amount: route.TotalAmount, Expiry: route.TotalTimeLock, PaymentHash: payment.PaymentHash, } copy(htlcAdd.OnionBlob[:], onionBlob) // Attempt to send this payment through the network to complete // the payment. If this attempt fails, then we'll continue on // to the next available route. firstHop := route.Hops[0].Channel.Node.PubKey preImage, sendError = r.cfg.SendToSwitch(firstHop, htlcAdd, circuit) if sendError != nil { // An error occurred when attempting to send the // payment, depending on the error type, we'll either // continue to send using alternative routes, or simply // terminate this attempt. log.Errorf("Attempt to send payment %x failed: %v", payment.PaymentHash, sendError) fErr, ok := sendError.(*htlcswitch.ForwardingError) if !ok { return preImage, nil, sendError } errSource := fErr.ErrorSource switch onionErr := fErr.FailureMessage.(type) { // If the end destination didn't know they payment // hash, then we'll terminate immediately. case *lnwire.FailUnknownPaymentHash: return preImage, nil, sendError // If we sent the wrong amount to the destination, then // we'll exit early. case *lnwire.FailIncorrectPaymentAmount: return preImage, nil, sendError // If the time-lock that was extended to the final node // was incorrect, then we can't proceed. case *lnwire.FailFinalIncorrectCltvExpiry: return preImage, nil, sendError // If we crafted an invalid onion payload for the final // node, then we'll exit early. case *lnwire.FailFinalIncorrectHtlcAmount: return preImage, nil, sendError // Similarly, if the HTLC expiry that we extended to // the final hop expires too soon, then will fail the // payment. // // TODO(roasbeef): can happen to to race condition, try // again with recent block height case *lnwire.FailFinalExpiryTooSoon: return preImage, nil, sendError // If we erroneously attempted to cross a chain border, // then we'll cancel the payment. case *lnwire.FailInvalidRealm: return preImage, nil, sendError // If we get a notice that the expiry was too soon for // an intermediate node, then we'll exit early as the // expected block height as shifted from underneath us. case *lnwire.FailExpiryTooSoon: update := onionErr.Update if err := r.applyChannelUpdate(&update); err != nil { return preImage, nil, err } return preImage, nil, sendError // If we hit an instance of onion payload corruption or // an invalid version, then we'll exit early as this // shouldn't happen in the typical case. case *lnwire.FailInvalidOnionVersion: return preImage, nil, sendError case *lnwire.FailInvalidOnionHmac: return preImage, nil, sendError case *lnwire.FailInvalidOnionKey: return preImage, nil, sendError // If the onion error includes a channel update, and // isn't necessarily fatal, then we'll apply the update // an continue with the rest of the routes. // // TODO(roasbeef): should re-query for routes with new updates case *lnwire.FailAmountBelowMinimum: update := onionErr.Update if err := r.applyChannelUpdate(&update); err != nil { return preImage, nil, err } return preImage, nil, sendError case *lnwire.FailFeeInsufficient: update := onionErr.Update if err := r.applyChannelUpdate(&update); err != nil { return preImage, nil, err } return preImage, nil, sendError case *lnwire.FailIncorrectCltvExpiry: update := onionErr.Update if err := r.applyChannelUpdate(&update); err != nil { return preImage, nil, err } return preImage, nil, sendError case *lnwire.FailChannelDisabled: update := onionErr.Update if err := r.applyChannelUpdate(&update); err != nil { return preImage, nil, err } return preImage, nil, sendError case *lnwire.FailTemporaryChannelFailure: update := onionErr.Update if err := r.applyChannelUpdate(update); err != nil { return preImage, nil, err } // As this error indicates that the target // channel was unable to carry this HTLC (for // w/e reason), we'll query the index to find // the _outgoign_ channel the source of the // error was meant to pass the HTLC along to. badChan, ok := route.nextHopChannel(errSource) if !ok { continue } // If the channel was found, then we'll inform // mission control of this failure so future // attempts avoid this link temporarily. r.missionControl.ReportChannelFailure(badChan) continue // If the send fail due to a node not having the // required features, then we'll note this error and // continue. // // TODO(roasbeef): remove node from path case *lnwire.FailRequiredNodeFeatureMissing: continue // If the send fail due to a node not having the // required features, then we'll note this error and // continue. // // TODO(roasbeef): remove channel from path case *lnwire.FailRequiredChannelFeatureMissing: continue // If the next hop in the route wasn't known or // offline, we'll prune the _next_ hop from the set of // routes and retry. case *lnwire.FailUnknownNextPeer: // This failure indicates that the node _after_ // the source of the error was not found. As a // result, we'll locate the vertex for that // node itself. missingNode, ok := route.nextHopVertex(errSource) if !ok { continue } // Once we've located the vertex, we'll report // this failure to missionControl and restart // path finding. r.missionControl.ReportVertexFailure(missingNode) continue // If the node wasn't able to forward for which ever // reason, then we'll note this and continue with the // routes. case *lnwire.FailTemporaryNodeFailure: missingNode, ok := route.nextHopVertex(errSource) if !ok { continue } r.missionControl.ReportVertexFailure(missingNode) continue // If we get a permanent channel or node failure, then // we'll note this (exclude the vertex/edge), and // continue with the rest of the routes. case *lnwire.FailPermanentChannelFailure: // TODO(roasbeef): remove channel from path continue case *lnwire.FailPermanentNodeFailure: // TODO(rosabeef): remove node from path continue default: return preImage, nil, sendError } } return preImage, route, nil } } // applyChannelUpdate applies a channel update directly to the database, // skipping preliminary validation. func (r *ChannelRouter) applyChannelUpdate(msg *lnwire.ChannelUpdate) error { // If we get passed a nil channel update (as it's optional with some // onion errors), then we'll exit early with a nil error. if msg == nil { return nil } err := r.UpdateEdge(&channeldb.ChannelEdgePolicy{ Signature: msg.Signature, ChannelID: msg.ShortChannelID.ToUint64(), LastUpdate: time.Unix(int64(msg.Timestamp), 0), Flags: msg.Flags, TimeLockDelta: msg.TimeLockDelta, MinHTLC: msg.HtlcMinimumMsat, FeeBaseMSat: lnwire.MilliSatoshi(msg.BaseFee), FeeProportionalMillionths: lnwire.MilliSatoshi(msg.FeeRate), }) if err != nil && !IsError(err, ErrIgnored) { return fmt.Errorf("Unable to apply channel update: %v", err) } return nil } // AddNode is used to add information about a node to the router database. If // the node with this pubkey is not present in an existing channel, it will // be ignored. // // NOTE: This method is part of the ChannelGraphSource interface. func (r *ChannelRouter) AddNode(node *channeldb.LightningNode) error { rMsg := &routingMsg{ msg: node, err: make(chan error, 1), } select { case r.networkUpdates <- rMsg: select { case err := <-rMsg.err: return err case <-r.quit: return errors.New("router has been shut down") } case <-r.quit: return errors.New("router has been shut down") } } // AddEdge is used to add edge/channel to the topology of the router, after all // information about channel will be gathered this edge/channel might be used // in construction of payment path. // // NOTE: This method is part of the ChannelGraphSource interface. func (r *ChannelRouter) AddEdge(edge *channeldb.ChannelEdgeInfo) error { rMsg := &routingMsg{ msg: edge, err: make(chan error, 1), } select { case r.networkUpdates <- rMsg: select { case err := <-rMsg.err: return err case <-r.quit: return errors.New("router has been shut down") } case <-r.quit: return errors.New("router has been shut down") } } // UpdateEdge is used to update edge information, without this message edge // considered as not fully constructed. // // NOTE: This method is part of the ChannelGraphSource interface. func (r *ChannelRouter) UpdateEdge(update *channeldb.ChannelEdgePolicy) error { rMsg := &routingMsg{ msg: update, err: make(chan error, 1), } select { case r.networkUpdates <- rMsg: select { case err := <-rMsg.err: return err case <-r.quit: return errors.New("router has been shut down") } case <-r.quit: return errors.New("router has been shut down") } } // CurrentBlockHeight returns the block height from POV of the router subsystem. // // NOTE: This method is part of the ChannelGraphSource interface. func (r *ChannelRouter) CurrentBlockHeight() (uint32, error) { _, height, err := r.cfg.Chain.GetBestBlock() return uint32(height), err } // GetChannelByID return the channel by the channel id. // // NOTE: This method is part of the ChannelGraphSource interface. func (r *ChannelRouter) GetChannelByID(chanID lnwire.ShortChannelID) ( *channeldb.ChannelEdgeInfo, *channeldb.ChannelEdgePolicy, *channeldb.ChannelEdgePolicy, error) { return r.cfg.Graph.FetchChannelEdgesByID(chanID.ToUint64()) } // ForEachNode is used to iterate over every node in router topology. // // NOTE: This method is part of the ChannelGraphSource interface. func (r *ChannelRouter) ForEachNode(cb func(*channeldb.LightningNode) error) error { return r.cfg.Graph.ForEachNode(nil, func(_ *bolt.Tx, n *channeldb.LightningNode) error { return cb(n) }) } // ForAllOutgoingChannels is used to iterate over all outgiong channel owned by // the router. // // NOTE: This method is part of the ChannelGraphSource interface. func (r *ChannelRouter) ForAllOutgoingChannels(cb func(*channeldb.ChannelEdgeInfo, *channeldb.ChannelEdgePolicy) error) error { return r.selfNode.ForEachChannel(nil, func(_ *bolt.Tx, c *channeldb.ChannelEdgeInfo, e, _ *channeldb.ChannelEdgePolicy) error { return cb(c, e) }) } // ForEachChannel is used to iterate over every known edge (channel) within our // view of the channel graph. // // NOTE: This method is part of the ChannelGraphSource interface. func (r *ChannelRouter) ForEachChannel(cb func(chanInfo *channeldb.ChannelEdgeInfo, e1, e2 *channeldb.ChannelEdgePolicy) error) error { return r.cfg.Graph.ForEachChannel(cb) } // AddProof updates the channel edge info with proof which is needed to // properly announce the edge to the rest of the network. // // NOTE: This method is part of the ChannelGraphSource interface. func (r *ChannelRouter) AddProof(chanID lnwire.ShortChannelID, proof *channeldb.ChannelAuthProof) error { info, _, _, err := r.cfg.Graph.FetchChannelEdgesByID(chanID.ToUint64()) if err != nil { return err } info.AuthProof = proof return r.cfg.Graph.UpdateChannelEdge(info) }